Activating the Realtime Register module within WHMCS. Unzip the Realtime Register module and upload it to your root directory

Transcription

1 WHMCS set up guide This guide helps you setting up your WHMCS preferences to enable a strong and effective connection between WHMCS and Realtime Register. To install the WHMCS module you need to have administrator rights within WHMCS. Version Activating the Realtime Register module within WHMCS 1.1 Login at WHMCS 1.2 Unzip the Realtime Register module and upload it to your root directory <whmcs root directory>/modules/registrars/realtimeregister/ Please remove the standard module first and upload the new files from the unzipped Realtime Register folder. 1.3 Create your admin, billing and tech handle inside the Realtime Register domain manager. You can manage these handles afterwards through WHMCS

2 1.4 Activate the uploaded Realtime Register module within WHMCS Setup => Products/Services => Domain Registrars => Activate Realtime Register

3 1.5 Configure the module and set the most important settings Setup => General Settings => Products/Services => Domain Registrars Here you see an overview of the registrars. Please click on Configure of the Realtime Register module.

4 2 Configuration settings Below you find instructions for each setting which you can set in the config within WHMCS. 2.1 Realtime Register Account Please enter your Realtime Register credentials General settings WHMCS module Activate general settings if you want to test, debug or receive debug test reports. Create your Registration Profile You can choose to create a standard set of handles which are used for Admin, Billing and Tech. If you do not use this option, the registrant details will be used

5 2.2 Use the Realtime Register availability check (optional) Realtime Register s availability check offers: + Unlimited availability checks (fair use policy applies) + Support for all TLD s + Stable and reliable performance In order to use Realtime Register s availability check over the WHMCS WHOIS services, please use the instructions below. Activation instructions: Use Realtime Register WHOIS inside module configuration and replace domainchecker. tpl inside your template (theme) directory with: /realtimeregister/domainchecker/templates/default/domainchecker.tpl Please NOTE! The template is optimized for the default theme. If you want to use the Realtime Register WHOIS with any other template (theme), please replace the variables below within domainchecker.tpl. $available $invalid $error $invalid $availabilityresults ----> $rtravailable ----> $rtrinvalid ----> $rtrerror ----> $rtrinvalid ----> $rtravailabilityresults 2.3 Synchronization Options Synchronize Domain Status (Recommended) Activate this option to synchronize the domain status between WHMCS and Realtime Register. Synchronize Expire date (Required) Activate this option to synchronize the expiry date between Realtime Register and WHMCS. Realtime Register is leading. Synchronize Due date (Not recommended) Activate this option to synchronize the due date between Realtime Register and WHMCS. The due date will be the same date as the Expiry date. Only activate this option if you are sure and backup before proceeding. Synchronize Next invoice date Activate this option to synchronize the next invoice date between WHMCS and Realtime Register. Realtime Register is leading.

6 Due date offset (extra setting if Synchronize Due date is active) The due date which will be calculated based on Expriry Date +/- amount of days you will type in. Next invoice date offset (extra setting if Synchronize next invoice date is active) The next invoice date which will be calculated based on Expriry Date +/- amount of days you will type in. Cron script limits Set the maximum number of domains which will be processed when the cron runs. Restriction for Realtime register cron scripts Enter trusted IP addresses to run Realtime Register cron scripts or leave it empty to allow run scripts from any IP. Please use the comma to separate multiple IP addresses. 2.4 Cron script Installation Set required cron job New module can synchronize different domain information using its own actions. The cron script URL is following: <your_url>/modules/registrars/realtimeregister/cron/all.php This way it will execute all actions. You have also ability to disable some actions which you do not want to perform using URL GET parameters. There re currently 5 types of actions: + Synchronize Auto Renew (syncautorenew) + Synchronize Pending Status (syncpendingstatus) + Synchronize Domain Information (syncdomaininfo) + Simulate Expiration (simulatexpiration) + Synchronize Domain Transfer (syncdomaintransfer) Do you want to disable some functionality? Cron URL with disabled action is going to look like: <your_url>/modules/registrars/realtimeregister/cron/all.php?<operation1>=0 For example, if you want to disable Simulate Expiration and Synchronize Auto Renew actions and use Synchronize Domain Information plus Synchronize Pending Status actions, your URL should look as: <your_url>/modules/registrars/realtimeregister/cron/all.php?simulatexpiration=0&syncautorenew=0

7 Advice cron job: Recommandation: we recommend to run the cron job daily to keep your domains in sync. More info about cronjobs: WHMCS default cron job: This information could be also synchronized using WHMCS domains sync script but we advice you to use Realtime Register cron script. Important: Do not use both scripts! For more information about WHMCS default cron script see:

8 3 FAQ WHMCS default Auto renew setting In order to set default Auto Renew value (either ON or OFF) for new domains inside WHMCS go to Setup => General Settings => Domains (tab) and tick/untick checkbox next to Default Auto Renewal Setting. Please NOTE! For.NL and.de extensions Auto Renew value is always turned ON at Realtime Register side, no matter what you set inside WHMCS. Still, this value could be set to OFF remotely by running Simulate Expiration action (see cron script configuration and actions detailed information for more info). It processes your Realtime Register domains which has expiry date in 15 days or less and disable Auto Renew at Realtime Register side in case Auto Renew is disabled inside WHMCS. Explicit renewals support The registries of the following TLDs do not support explicit renewal:.it,.fr,.be,.at,.am,.fm,.ru,.li,.ch. That s why after renew operation is requested, we make sure that Auto Renew is enabled at both Realtime Register and WHMCS. This way after expiry date is reached, domain will auto renew (expiry date will get +1 year at Realtime Register) and domain sync script (either WHMCS or our s) will sync the expiry date (due date and next invoice date) of domain. Registration of.fr,.re,.pm,.tf,.wf and.yt TLDs To properly register.fr,.re,.pm,.tf,.wf and.yt TLDs, please add next line into <whmcs root directory>/includes/additionaldomainfields.php, which will allow to provide birth place country code for our service: $additionaldomainfields[ <tld lowercase> ][] = array( Name => Birthplace Country, Type => text, Size => 2, Default => <default country code>, Required => false, Description => Please, enter your birth country code (use <a href= en.wikipedia.org/wiki/iso_3166-1_alpha-2 >ISO alpha 2</a>) ); Before you copy this line, replace: 1. <tld lowercase> - with TLD you want to add additional field to, e.g..fr ; 2. <default country code> - with country code that has to be set by default; Example: $additionaldomainfields[.fr ][] = array( Name => Birthplace Country, Type => text, Size => 2, Default => FR, Required => false, Description => Please, enter your birth country code (use <a href= >ISO alpha 2</a>) );

9 Registration of SE and.nu TLDs To properly register.se and.nu TLDs, please add next lines into <whmcs root directory>/includes/additionaldomainfields.php, which will allow to provide Personal or organisation number and Vat number for our service: $additionaldomainfields[.se ][] = array( Name => Personal or organisation number, Type => text, Size => 20, Default =>, Required => false, Description => Corporate identity number or personal identification number (for non Swedish, any other unique identification number can be used instead) ); $additionaldomainfields[.se ][] = array( Name => Vat number, Type => text, - Size => 20, Default =>, Required => false, Description => VAT registration number (only for foreign legal entities within the EU who are registered to pay VAT) ); $additionaldomainfields[.nu ][] = array( Name => Personal or organisation number, Type => text, Size => 20, Default =>, Required => false, Description => Corporate identity number or personal identification number (for non Swedish, any other unique identification number can be used instead) ); $additionaldomainfields[.nu ][] = array( Name => Vat number, Type => text, - Size => 20, Default =>, Required => false, Description => VAT registration number (only for foreign legal entities within the EU who are registered to pay VAT) ); 4 Contact If you need any support to install or configure this WHMCS module, please send an to support@realtimeregister.com.