TRAINING CENTER FOR HOT STAMPING TECHNOLOGY

Transcription

1 TRAINING CENTER FOR HOT STAMPING TECHNOLOGY 3 rd PHS Suppliers Forum Troy, Michigan / USA, November 4 th 5 th, 2015 TAKE THE OPPORTUNITY OF BEING TRAINED BY THE ONES WHO HAVE TRAINED THE MARKET LEADERS IN HOT STAMPING TECHNOLOGY

2 HIGH-QUALITY TRAININGS SPECIFICALLY DEDICATED TO PHS TECHNOLOGY PROGRAM, November 4 th 5 th, 2015 WEDNESDAY, November 4th 11:00 a.m. 06:30 p.m. Following on from the highly successful international trainings and seminars on HOT STAMPING TECHNOLOGY during the last four years, the upcoming Compact Training represents what the GRUNDIG AKADEMIE has proven and continues to provide in the press-hardening world: HIGH QUALITY TRAININGS SPECIFICALLY DEDICATED TO PHS TECHNOLOGY. Clearly, the leading players in industrial press hardening technology rely on the high standard of the GRUNDIG AKADEMIE s training program to qualify their engineering staff. Therefore, the we would like to invite you to participate in this two-day event (Wednesday to Thursday) and encourage you to take the opportunity of being trained by the professionals who have THE SKILLS, THE KNOW-HOW WHO HAVE TRAINED THE MARKET LEADERS IN HOT STAMPING TECHNOLOGY MAJOR PLAYERS Luke Reini / Matt Enloe (General Motors Company, Global Vehicle Engineering, Detroit, USA) Manuel Lopez (Gestamp BIW, Sant Esteve Sesrovires, Spain) Ralf Kolleck / Michael Preininger (Technical University Graz, Institute for Tools & Forming, Graz, Austria) Fritz Ebner (Ebner Industrieofenbau GmbH, Leonding, Austria) Josef Faderl (voestalpine Stahl GmbH, Linz, Austria) Joseph Price (Böhler Edelstahl GmbH & Co. KG, Kapfenberg, Austria) Christian Conrad (Fraunhofer Institute IZFP, Saarbruecken, Germany) Eric Kam (AutoForm Engineering USA, Inc., Troy, MI, USA) Michael Fritz (Trumpf Laser- und Systemtechnik GmbH, Ditzingen, Germany) - Jens Aspacher / Paul Thom (Schuler AG, Waghaeusel, Germany) - Johannes Bührle (Zwick Roell Materials Testing Machines, Ulm, Germany) - Arndt Breuer / Mark Eisenmenger (WISCO Tailored Blanks, Duisburg, Germany, / TWB Company LLC., Monroe, MI, USA) Bringing together the total picture on Press Hardening Methods in Automotive Application Materials and Coatings Heating Technologies Tool and Plant Technologies Quality Control Process Simulation Follow-up Operations (Laser-Cutting and Joining Methods) With technology inputs from the leading players and guided as a common thread from Professor Ralf Kolleck (Technical University Graz, Institute for Tools & Forming, Graz, Austria). Being in control of the complexity of PHS technology requires a comprehensive understanding of what needs to be included accurately in sense of materials performance, process technology and part design. In a series of short presentations, representatives from leading players in Industrial Hot Stamping describe and illustrate key aspects and state-of the- art procedures. The entire thematic completion will be brought together by the knowledge and commentaries of internationally renowned experts. Real Live Work Simulation on the Circle Training Unit CT-1: Process Monitoring Unit CT-2: Simulation Unit CT-3: Laser Application THURSDAY, November 5th 08:55 a.m. 03:45 p.m. Within the selected topical units, specialized skills are given to provide insight and understanding in process monitoring strategies, in simulations based on process design and design optimization, dies and tools and in post-processing technologies. Additionally, the participants will have an understanding of the interactions within each individual technical content in the 3 units. The participants will circle through the 3 interactive units in small training groups.

3 DAY 1: November 4th, 2015 SHORT PHS TRAINING COURSE General Introduction 11:00 a.m. Welcome Christian Kovacs (GRUNDIG AKADEMIE, Nuremberg, Germany) Module 1 Press Hardening of Steel (PHS) in Automotive Application 11:05 a.m. General Introduction Press Hardening vs. Cold Forming 11:20 a.m. Grain Size Effects on PHS Impact Performance Matt Enloe (GM Company, Global Vehicle Engineering, Detroit, USA) 11:50 a.m. New Zinc Coated Material for Hot Stamping Manuel Lopez (Gestamp BIW, Sant Esteve Sesrovires, Spain) 12:20 p.m. Semifinished Product Steel Grades 22MnB5, MBW1900, Stainlless Steels Michael Preininger (T&F, Graz, Austria) 12:40 p.m. Short Break Module 2 Tool Steel, Tailored Blanks and Coatings 1:30 p.m Tools and Tool Steels State of the Art and Future Developments 1:40 p.m. Direct and Indirect Hot Forming of Galvanized Steel Joseph Faderl (voestalpine Stahl GmbH, Linz, Austria) 2:05 p.m. Innovative High Performance Tool Steels for Hot Stamping Joseph Price (Böhler-Uddeholm Corporation, Elgin, USA) 2:30 p.m. Optimizing Parameters for Hot Formed Tailored Blank Applications Arndt Breuer / Mark Eisenmenger (WISCO Tailored Blanks, Duisburg, Germany, / TWB Company LLC., Monroe, MI, USA) Module 3 Equipment & Machinery 3:25 p.m. Press Hardening Requirements to an Efficient and Economic Process 3:35 p.m. From the Concept to Serial Production - Component Design in Hot Stamping in Consideration of Feasibility, Functionality and the Optimization of the Production Costs Jens Aspacher / Paul Thom (Schuler AG, Waghaeusel, Germany) 4:00 p.m. Press Hardening Furnaces for the Future Fritz Ebner (Ebner Industrieofenbau GmbH, Leonding, Austria) 4:25 p.m. Reliable Materials Testing in Support of Efficient Hot Forming Processes Johannes Bührle (Zwick Roell Materials Testing Machines, Ulm, Germany) 4:50 p.m. Nondestructive Testing of Material Properties and Defects in Cold and Hot Stamped Parts Christian Conrad (Fraunhofer IZFP) Module 4 Trends and Challenges in PHS 5:10 p.m. Automotive Trends and Challenges Luke Reini (General Motors Company, Global Vehicle Engineering, Detroit, USA ) 5:30 p.m. Conclusion and Outlook 5:45 p.m. Networking Reception 2:55 p.m. Short Break 6:30 p.m. End of Day 1

4 DAY 2: November 5th, 2015 CIRCLE TRAINING Group Red 08:55 a.m. How it Works - Short Introduction on Contents and Organization Unit 1: 09:00 a.m. Unit 2: 10:00 a.m. Unit 3: 11:00 a.m. Process Monitoring & Product Quality Control, (live simulation from T&F, Graz, Austria) Michael Preininger, Christian Conrad (T&F, Graz, Austria; Fraunhofer Institute IZFP, Saarbruecken, Germany) Hands On Press Hardening Process Engineering Eric Kam (AutoForm Engineering USA, Inc., Troy, MI, USA) Profound Understanding of the State of the Art Laser Cutting Process and its Key Components Michael Fritz (Trumpf Laser- und Systemtechnik GmbH, Ditzingen, Germany) 12:00 p.m. Business Lunch and Networking 01:30 p.m. Drive to TRUMPF Laser Technology Center, Clipper Street, Plymouth Township, MI Group Green 08:55 a.m. How it Works - Short Introduction on Contents and Organization Luke Reini (GM Global Vehicle Engineering) Unit 2: 09:00 a.m. Unit 3: 10:00 a.m. Unit 1: 11:00 a.m. Hands On Press Hardening Process Engineering Eric Kam (AutoForm Engineering USA, Inc., Troy, MI, USA) Profound Understanding of the State of the Art Laser Cutting Process and its Key Components Michael Fritz (Trumpf Laser- und Systemtechnik GmbH, Ditzingen, Germany) Process Monitoring & Product Quality Control, (live simulation from T&F, Graz, Austria) Michael Preininger, Christian Conrad (T&F, Graz, Austria; Fraunhofer Institute IZFP, Saarbruecken, Germany) 12:00 p.m. Business Lunch and Networking 01:30 p.m. Drive to TRUMPF Laser Technology Center, Clipper Street, Plymouth Township, MI :45 p.m. End of Day 2 Group Blue 08:55 a.m. How it Works - Short Introduction on Contents and Organization Christian Kovacs (GRUNDIG AKADEMIE) Unit 3: 09:00 a.m. Unit 1: 10:00 a.m. Unit 2: 11:00 a.m. Profound Understanding of the State of the Art Laser Cutting Process and its Key Components Michael Fritz (Trumpf Laser- und Systemtechnik GmbH, Ditzingen, Germany) Process Monitoring & Product Quality Control, (live simulation from T&F, Graz, Austria) Michael Preininger, Christian Conrad (T&F, Graz, Austria; Fraunhofer Institute IZFP, Saarbruecken, Germany) Hands On Press Hardening Process Engineering Eric Kam (AutoForm Engineering USA, Inc., Troy, MI, USA) 12:00 p.m. Business Lunch and Networking 01:30 p.m. Drive to TRUMPF Laser Technology Center, Clipper Street, Plymouth Township, MI 48170

5 VENUE The GRUNDIG AKADEMIE Training Center for Hot Stamping Technology will take place at: Management Education Center Eli Broad Graduate School of Management 811 West Square Lake Road Troy, Michigan USA Phone: + 1 (248) Fax: + 1 (248) web: GRUNDIG AKADEMIE The GRUNDIG AKADEMIE is one of the most internationally renowned institutions in postgraduate training. The qualification in Press Hardening is internationally accredited and focused on the needs of each individual company. The specified seminars are aimed at combining practical experience, fundamentals and innovative technologies on the shop floor. We work continuously to set the standards in further education, to include the newest technologies and in doing so retain the innovative ability for our partners. TRAINING FEE AND REGISTRATION ORGANIZED BY Training Fee: US Dollar Binding registration has to be filled in and sent via fax or (form is available on Invoicing will be done by our partner TOP- BUSINESS GmbH. Recommended hotel: Embassy Suites Detroit - Troy / Auburn Hills The training fee includes the participation in the lectures as well as printed proceedings and catering during the day. GRUNDIG AKADEMIE TOP BUSINESS GmbH Klingenhofstrasse Nuremberg Germany Christian Kovacs phone fax [email protected]

6 HIGH QUALITY TRAININGS SPECIFICALLY DEDICATED TO PHS TECHNOLOGY PRODUCT OVERVIEW Additional Trainings The additional trainings offer a wide range of suitable add on courses referring to the technology in complex metal forming, press hardening and hot stamping. Onsite Executive Trainings These trainings consist of concentrated and specific knowledge transfer in the form of seminar lectures and discussions, including joint field visits in the relevant fields (including the production, materials laboratory, receiving stock, finished goods, etc.). Advanced Trainings These trainings combine theoretical explanations of the respective core area with experimental internship in the laboratory and final analytical examination of generated press hardened parts. Foundation Training The range of this training begins with the stages of the art press hardening process, through solution-based problem solving approaches and finishes with new innovative ideas in the hot forming sector. This series of trainings, each focusing on a particular aspect of technology, offers comprehensive access to valuable knowledge in hot sheet metalforming. These trainings have proved to be a vital learning curve for its participants. The courses provide clear concepts which could practically easily be replicated in the trainees business to maximise efficiency. ADT-A Virtual Process Design for Hot Stamping of Ultra-High- Strength Steel ET-A Process Parameter Setup AT-A Materials in PHS AT-B Quality Control Methods for PHS ADT-B Laser Applications in Press Hardening Technology ADDITIONAL TRAININGS ET-B Process Monitoring & Product Quality Control AT-C Tailored Part Properties ADT-C Selected Technical Trainings for PHT Experts ONSITE EXECUTIVE TRAININGS ADVANCED TRAININGS ET-C Operator Training AT-D Tooling in PHT FOUNDATION TRAINING FT Heat Treatment & Hot Forming of Steel AT-E 3-MA Non-Destructive Testing ADT-D Soft Skills for PHT Experts ET-D Hydroforming Expertise AT-F Mechanical Testing Process Technology Materials Selection Modeling & Simulation Carbody Design Systems Engineering

7 GRUNDIG AKADEMIE Events 2016 CONFIRMED SPONSORS AND PRESENTERS TTP 2016 Graz, Austria, April 27 TH - 28 TH The research in the fields of ultra-high strength steel and press hardening is of great importance. Specifically, the considerable amount of industrial participants proves the relevance of these topics for the economy. GRUNDIG AKADEMIE supports the third conference Tools and Technologies for Processing Ultra High Strength Materials from April 27th 28th, We are looking forward to meeting you there. EuroBLECH 2016 Hannover, Germany, October 25 th 29 th Constitutive on the successful INTERNATIONAL SEMI- NAR on Hot Sheet Metal Forming of High-Performance Steel held at the EuroBLECH 2012 and EuroBLECH 2014 in Hanover, Germany, we would like to invite you to a scientific and innovative seminar, together with international PHS-key players, presenting latest developments at the EuroBLECH We are looking forward to meeting you there. ORGANIZED BY GRUNDIG AKADEMIE TOP BUSINESS GmbH Klingenhofstrasse Nuremberg Germany Christian Kovacs phone fax [email protected]

8