23rd ANNUAL ALAW: Lasers: Efficiency and Strength for Lightweighting

Transcription

1 23rd ANNUAL ALAW: Lasers: Efficiency and Strength for Lightweighting PROGRAM AGENDA Monday, June 6 8 a.m.- 4 p.m. Exhibit Set up in the Garden Gallery Room, Inn at St. John s 8 a.m.- 1 p.m. Lasers 101: Certificate Course & Boxed Lunch in Wisdom Room David Havrilla, TRUMPF Inc. 8 a.m. 1 p.m. Golf Outing and Boxed Lunches/ Shot Gun Start- Inn at St. John s Golf Course *Transportation provided for both tours, to and from the Inn at St. John s. 2 4 p.m. Technology Demonstrations Featuring the Latest Solutions for Cutting and Welding from Laser Depth Dynamics, ABB and Laser Mechanisms, Inc. Laser Mechanisms, Inc. in Novi 4-6 p.m. Open House at Precitec Demonstrating 6000-series Aluminum Fillet Welds without Filler Wire Precitec in Wixom Open House Reception & Live Demos Precitec USA Center Oaks Ct. Wixom, MI p.m. 6:15-8 p.m. Welcome Reception and Exhibits in the Garden Gallery Room 1

2 Tuesday, June 7 7 7:45 a.m. Breakfast sponsored by: Exhibits in the Garden Gallery Room 7:50-8 a.m. General Session in the Grande Ballroom Welcome Remarks by Co-Chairs: Craig Bratt, Fraunhofer USA, Stan Ream, EWI, Justin Wolsker, General Motors 8:05 9 a.m. KEYNOTE Presentation: Enabling Technologies in Laser Welding and Ablation for Hot Stamped Laser Welded Blanks for Lightweight Automotive Body in Steel Gagan Tandon, ArcelorMittal and Gary Black, ArcelorMittal 9:05 9:25 a.m. Overview of Powder Fed Additive and Hybrid Manufacturing Jim Cann, Optomec, Inc. 9:30 9:50 a.m. Multi Sensor System for Quality Inspection of Highly Stressed Weld Seams in Pickling Lines Brian Zaborny, PLASMO USA LLC 9:55-10:10 a.m. Networking Break and Exhibits in the Garden Gallery Room 10:15-10: 35 a.m. Welding Dissimilar Materials Using a Single Mode Fiber Laser Geoff Shannon, Amada Miyachi America, Inc. 10:40 11:00 a.m. Laser Performance Measurements and Techniques Used for Improving Additive Manufacturing Processes John McCauley, Ophir-Spiricon, LLC 11:05-11:25 a.m. Latest Advances in Additive Manufacturing for Production Applications Frank Geyer, TRUMPF Inc. 11:30-11:50 a.m. Laser Brazing with Homogenizing Modules and Triple Spot Axel Luft, Laserline 11:55-12:15 p.m. nlight alta : Next-Generation Fiber Laser Platform for Advanced kw Material Processing Applications Dahv Kliner, nlight Corp. 12:15-1:15 p.m. Networking Lunch Judea Ballroom & Exhibits in the Garden Gallery 1:15 1:35 p.m. Laser Tempering for Crash Management Blake McAllister, EWI 1:40 2 p.m. Process Control and Quality Assurance during Laser Remote Welding Thorsten Lorenz, Precitec 2

3 2:05-2:25 p.m. Simulating BIW Welding Distortion with Audi Jeff Robertson, Simufact Engineering 2:30-2:50 p.m. Networking Break & Exhibits in the Garden Gallery Room 2:55-3:15 p.m. Two Invisible Concerns when Dealing with Porosity in Laser Welded Aluminum Parts Larry Cherne, Praxair 3:20-3:40 p.m. Comprehensive Control of Laser Welding with OmniWELD Monitoring Suite Paul Webster, Laser Depth Dynamics, in partnership with Laser Mechanisms, Inc. 3:45-4:05 p.m. Remote Laser Welding Scott Heckert, II-VI HIGHYAG 4:10-4:30 p.m. Hot Formed Tailor Welded Blanks: Technology and Applications Nikolaj Krasokha, WISCO Tailored Blanks 4:35-5:35 p.m. Networking Reception & Exhibits in the Garden Gallery Room 5:45-9 p.m. Open House Reception & Live Demos at TRUMPF Inc. TRUMPF Inc. Laser Technology Center 4711 Clipper St. Plymouth, MI :45-9 p.m. 3

4 Wednesday, June 8 7 7:30 a.m. Breakfast and Exhibits in the Garden Gallery Room 7:35-8:20 a.m. General Session in the Grande Ballroom KEYNOTE: Recent Advances in Aluminum Laser Welding Stefan Kaierle, Laser Zentrum Hannover e.v. 8:25-8:45 a.m. Q-Switched Laser Surface Modification of Copper and Aluminum to Improve Laser Beam Absorption Jay Eastman, EWI 8:50-9:15 a.m. Aluminum Laser Welded Blanks: The Optimum Solution for Doors Jim Evangelista, Shiloh Industries 9:25-9:45 a.m. Latest Trends in Laser Applications in the European Automotive Market Christian Foehl, TRUMPF GmbH 9:50 10:10 a.m. Tri-Focal Fiber Lasers for Automotive Brazing Eric Stiles, IPG Midwest 10:15-11 a.m. Networking Break & Exhibits in the Garden Gallery Room 11:05-11:25 a.m Laser Processing of Micro Features for Automotive Components Dale Sabo, SCANLAB America, Inc. 11:30-11:50 a.m. Additive Manufacturing from Micro to Large Scale Applications Development Frank Brueckner, Fraunhofer IWS 11:55 a.m.- 12:15 p.m. Process Monitoring and Control Systems for Welding and Additive Mfg. Rahul Patwa, Steffen Mueller, and Sandro Mehner, Fraunhofer USA 4

5 Wednesday, June 8 12:30-4 p.m. Open House Lunch & Live Demos at Fraunhofer USA CLA Fraunhofer USA Center for Laser Applications (CLA) Port St. Plymouth, MI :30-4 p.m. 5-8 p.m. Open House Networking Reception & Live Demos at EMAG L.L.C. GRAND OPENING NEW Laser Welding Laboratory! EMAG L.L.C Grand River Ave. Farmington Hills, MI p.m. 5