Test criteria: Mattresses (status: August 2010) A Products Latex mattresses, cold foam mattresses, spring-interior mattresses, futons with padding from kapok, coconut, horsehair or synthetic fibres B Basic requirements Full declaration of the Minimisation requirements for substances with dangerous properties according to dangerous substances regulations. Compliance with threshold values for dangerous substances refer to D laboratory examinations Materials with the following classifications may not be used in the product (proof: Declaration of conformity from the manufacturer): Forbidden substances acc. to Regulation (EC) No. 1272/2008, Hazardous Substances Ordinance, TRGS, national laws (D, A, NL) POP (Persistent Organic Pollutants) Substances according to MAK list lll1 and III2 Substances according to Regulation (EC) No. 1272/2008 Category Carc. 1A and 1B, Muta. 1A and 1B, Repr. 1A and 1B Substances according to TRGS 905 K1 and K2, M1 and M2, R1 and R2 Substances according to IARC groups 1 and 2a Substances with hazard symbols N in liquid products apart from aliphatics Substances with hazard symbol N whose classification is not based on the R rating combination R 51/R 53 Substances with hazard symbol N whose classification is based on the R rating combination R 51/R 53: > 1 % Substances with hazard symbol T+ Substances with hazard symbol T: > 0,1 % Substances with the following R ratings: R 26, R 27, R 28, R 45, R 46, R 48, R 49 Substances with the following R ratings > 0,1 %: R 23, R 24, R 25, R 60, R 61, R 62, R 63, R 65 Substances with rating combinations in which one of the above-named R-ratings occurs Substances with WGK 3 (German water hazard class 3) According to CITI or OECD persistent accumulating (log Pow > 3) substances with LC 50 10 mg/l Arsenic, lead, cadmium, mercury and compounds Organic compounds of tin Antimony trioxide Barium compounds apart from barium sulphate Pyrethroide CFC s Organophosphates Phthalatic acid esters (apart from PET) C Special requirements No use of moth repellents (proof: Declaration of conformity from the manufacturer): The quality standards DIN EN 1334, 1725 and 1957 have been adhered to (proof: Declaration of conformity from the manufacturer Loss of firmness: < 20% (proof: submission of a test report according to EN 1957) Loss of thickness: < 15 mm (proof: submission of a test report according to EN 1957)
Page 2 of 6 D Laboratory examinations P11 Complete mattress Test parameter Threshold value Test method Emission test TVOC (total volatile organic compounds) VOC with the following categorisations: Regulation (EC) No. 1272/2008: Category Carc. 1A and 1B, Muta. 1A and 1B, Repr. 1A and 1B; TRGS 905: K1, K2, M1, M2, R1, R2; IARC: Group 1 and 2A; DFG (MAK list): Categories III1, III2 VOC (sum) without NIK VOC (individual values): Sum of sensitising with the following categorisations: DFG (MAK list): Category IV, German Federal Institute for Risk Assessment lists: Cat A, TRGS 907 Sum of VOC with the following categorisations: Regulation (EC) No. 1272/2008: Category Carc. 2, Muta. 2, Repr. 2; TRGS 905: K3; IARC: Group 2B; DFG (MAK list): Category III3 Sum C 9 C 14: Alkanes / Isoalkanes VOC (individual substances): Styrol Disulphide (only latex products) 400 µg/m³ (2 days after test chamber loading) 200 µg/m³ (7 days after test chamber loading) 2 µg/m³ (2 days after test chamber loading) 100 µg/m³ (7 days after test chamber loading) 100 µg/m³ (7 days after test chamber loading) 50 µg/m³ (7 days after test chamber loading) 100 µg/m³ (7 days after test chamber loading) 10 µg/m³ (7 days after test chamber loading) 50 µg/m³ (2 days after test chamber loading) DIN EN ISO 16000-6, DIN EN ISO 16000-9, DIN EN ISO 16000-11 Nitrosamine (only latex products) 0.3 µg/m³ (2 days after test chamber loading) BGI 505.23 R value Formaldehyde 1.0 (7 days after test chamber loading) 0.02 ppm (2 days after test chamber loading) following DIN EN 717-1, DIN EN ISO 16000-3 Odour Grade 3 (24 hours after loading of desiccator) VDA 270; 40 C
Page 3 of 6 P2 Covering P21 Undyed textile covering P22 Dyed textile covering Test parameter Threshold value Threshold value Test method Content analysis AOX (adsorbable organic halogenated compounds) - 1.0 DIN EN ISO 9562 Heavy metals Antimony (Sb) covering material incl. Filler and padding material (P2) - 5.0 Arsenic (As) - 0.2 Lead (Pb) - 0.2 Cadmium (Cd) - 0.1 Chrome sum (Cr) - 3.0 Chrome VI (Cr VI) - 3.0 Cobalt (Co) - 1.0 Copper (Cu) - 25 Nickel (Ni) - 1.0 Mercury (Hg) - 0.02 Pesticides/Biocides Pyrethroid wool (sum) Cyfluthrin, Cyhalothrin, Cypermethrin, Deltamethrin, Esfenvalerat, Fenvalerat, Permethrin 1.0 1.0 Pyrethroides of other fibres (sum) 0.5 0.5 Pesticides without pyrethroids (sum) 2,3,5-T, 2,4 D, Azinophosmethyl, Azinophosethyl, Aldrin, Bromophos-ethyl, Captafol, Carbaryl, Chlordane, Chlordimeform, Chlorfenvinphos, Coumaphos, DDD, DDE, DDT, DEF/Butifos, Diazinon, Dichlorvos, Dichlorprop, Dichlofenthion, Dicrotophos, Dieldrin, Dimethoat, Dinoseb und Salze, alpha- und beta-endosulfan /-sulfat, Endrin, Ethion, Fenchlorphos, Fenitrothion, Fenthion, alpha-hch, beta-hch, gamma-hch (Lindan), delta-hch, Heptachlor, Heptachlorepoxid, Hexachlorbenzol (HCB), Isodrin, Kelevan, Kepon, Malathion, MCPA, MCPB, Mecoprop, Methamidophos, Methidathion, Methoxychlor, Mirex, Monochrotophos, Parathion-ethyl, Parathion-methyl, PCP, Perthan, Phosdrin/ Mevinphos, Phosalon, Phosmet, Phoxim, Pirimiphos-ethyl, Profenophos, Propethamphos, Quinalphos, Stroban, Telodrin, Tetrachlorvinphos, Toxaphen (Camphechlor), 2,3,5,6-Tetrachlorphenol, Trifluralin Orthophenylphenol (OPP; only natural fibers or Chlorphenols (sum; only natural fibers or PCP, 2,3,4,5-TeCP, 2,3,4,6-TeCP, 2,3,5,6-TeCP, 2,3,5- Trichlorphenol, 2,3,6-Trichlorphenol, 2,4,5-Trichlorphenol, 2,4,6-Trichlorphenol 0.5 0.5 1.0 1.0 Eluate, analysis ICP/MS Cr(VI): DIN EN ISO 17075 following DFG-S19, GC-ECD Extraction, esterification, GC/MS 0.1 0.1 CEN / TR 14823 Triclosan 0.5 0.5 CEN / TR 14823 Organotin compounds (limit value per single substance) TBT, DBT, TPhT, MBT, MOT, DOT - TBT, DBT, TPhT 0.025 MBT, MOT, DOT 0.1 Formaldehyde 20 20 Extraction, analysis following DIN EN ISO 17353 DIN EN ISO 14184-1, LFGB 64, 82.02-1 Amines (azo colourants) - 20 LFBG 64, 82.02-2,-4 Allergenic colouring (dispersion colouring ; only synthethic fibers or Organo-chlorine carriers (only synthetic fibers or - 50 DIN 54231-1.0 Optical brighteners No rating No rating UV light Extraction with acetone, GC/MS ph value 4,5-9,0 4,5-9,0 DIN EN ISO 3071
Page 4 of 6 P2 Covering (continued) P21 Undyed textile covering P22 Dyed textile covering Test parameter Threshold value Threshold value Test method Colour fastness - Phthalates (Sum; only printings) DMP, DEP, DPP, DBP, BBP, DEHP, DOP, DINP, DIDP, DIBP Saliva/sweat fastness 5 sweat fastness alcalnic/acidic: 3-4 rubbing fastness dry 3-4 Rubbing fastness wet 2 Water fastness 3 200 200 LMBG 82.10-1 following DIN EN 15777
Page 5 of 6 P3 Upholstery / padding P31 Latex P32 Latexed fibres P33 Pure / cold foam P34 Synthetic fibers P35 Plant & animal fibres Test parameter Threshold value Threshold value Threshold value Threshold value Threshold value Test method Content analysis AOX (adsorbable organic halogenated compounds) - - 1.0 1.0 - following DIN 38409-14 Heavy metals Antimony (Sb) upholstery/padding material incl. Filler and padding material (P3) - Pesticides/Biocides Pyrethroid wool (sum) Cyfluthrin, Cyhalothrin, Cypermethrin, Deltamethrin, Esfenvalerat, Fenvalerat, Permethrin - - 5.0 - - - - - 1.0 Pyrethroides of other fibres (sum) - 1.0 - - 0.5 Pesticides without pyrethroids (sum) 2,3,5-T, 2,4 D, Azinophosmethyl, Azinophosethyl, Aldrin, Bromophos-ethyl, Captafol, Carbaryl, Chlordane, Chlordimeform, Chlorfenvinphos, Coumaphos, DDD, DDE, DDT, DEF/Butifos, Diazinon, Dichlorvos, Dichlorprop, Dichlofenthion, Dicrotophos, Dieldrin, Dimethoat, Dinoseb und Salze, alpha- und beta-endosulfan /-sulfat, Endrin, Ethion, Fenchlorphos, Fenitrothion, Fenthion, alpha-hch, beta-hch, gamma-hch (Lindan), delta-hch, Heptachlor, Heptachlorepoxid, Hexachlorbenzol (HCB), Isodrin, Kelevan, Kepon, Malathion, MCPA, MCPB, Mecoprop, Methamidophos, Methidathion, Methoxychlor, Mirex, Monochrotophos, Parathion-ethyl, Parathion-methyl, PCP, Perthan, Phosdrin/ Mevinphos, Phosalon, Phosmet, Phoxim, Pirimiphos-ethyl, Profenophos, Propethamphos, Quinalphos, Stroban, Telodrin, Tetrachlorvinphos, Toxaphen (Camphechlor), 2,3,5,6-Tetrachlorphenol, Trifluralin Orthophenylphenol (OPP; only natural fibers or Chlorphenols (sum; only natural fibers or PCP, 2,3,4,5-TeCP, 2,3,4,6-TeCP, 2,3,5,6-TeCP, 2,3,5- Trichlorphenol, 2,3,6-Trichlorphenol, 2,4,5-Trichlorphenol, 2,4,6-Trichlorphenol Organotin compounds (limit value per single substance) TBT, DBT, TPhT, MBT, MOT, DOT Phthalates (sum) DMP, DEP, DPP, DBP, BBP, DEHP, DOP, DINP, DIDP, DIBP - - - - 0.5-1.0 - - 1.0 Eluate, analysis ICP/MS following DFG-S19 Extraction, DFG/S19, GC/MS - 0.1 - - 0.1 CEN / TR 14823 - - TBT, DBT, TPhT 0,025 MBT, MOT, DOT 0,1 TBT, DBT, TPhT 0,025 MBT, MOT, DOT 0,1 - - 500 - - Formaldehyde - - - - 20 - Extraction, analysis following DIN EN ISO 17353 following DIN EN 15777 DIN EN ISO 14184-1, LFGB 64.82, 02-1
Page 6 of 6 P3 Upholstery / padding (continued) P31 Latex P32 Latexed fibres P33 Pure / cold foam P34 Synthetic fibers P35 Plant & animal fibres Test parameter Threshold value Threshold value Threshold value Threshold value Threshold value Test method Optical brighteners - - - No rating No rating UV light Organophosphorous flame retardants (sum) TMP, TEP, TPP, TiBP, TBP, TDBPP, TCEP, TCPP, TDCPP, TEHP, TBEP, TPhP, TKP - - 10 - - following DFG S 19 Polymer percentage Declaration in % Declaration in % - - - IR/ATR Filler conten (ash content) 5% - - - - Thermo-gravimetry IR/ATR