TEST REPORT 26 October, 2005 Page 1 of 8

Transcription

1 TEST REPORT 26 October, 2005 Page 1 of 8 ANADOLU KİMYA S.S. Bakır ve Pirinç San. Sit. Leylak Cad. No:15 Beylikduzu/İstanbul FAX NO: For the attention of Gurkan Kaya(arge@anadolukimya.com) REPORT NUMBER: REVISED I DESCRIPTION: One sample of ANTEX Gold GS 618 Puff / ANTEX SP 280 Suede Puff printed panel. DATE IN: 16 June, 2005 RESUBMIT DATE: 1 August, 2005 DATE OUT: 1 August, 2005 / 26 October, 2005 REQUEST: Formaldehyde, PVC, Phthalate, APEO, Heavy Metal and PCP/TeCP/OPP tests in accordance with specified test methods. RESULTS: See attachment COMMENTS: Submitted sample meets requirement given by the applicant in respect of property tested. TESTS: Formaldehyde PVC Phthalate APEO Heavy Metal PCP/TeCP/OPP RESULTS: The test results relate only to the items tested. The report shall not be reproduced except in full, without the written approval of the laboratory. The reported uncertainity is based on a standard uncertainity multiplied by a coverage factor k=2, providing a level of confidence of approximately 95% the uncertainity evaluation has been carried out in accordance with BS EN ISO/IEC requirements. Opinions and interpretations expressed herein are outside the scope of UKAS Accreditation. Tests marked (*) in this Test Report are not included in the UKAS Accreditation Schedule for this Laboratory. NESLIHAN SOZER ANALYTICAL LABORATORY TEAM LEADER OZGUR ALP ALMAZ LABORATORY MANAGER

2 R E S U L T S Page 2 of 8

3 R E S U L T S Page 3 of Formaldehyde BS EN ISO Part Free & Hydrolized Formaldehyde (Water Extraction) ANTEX Gold GS 618 Puff / ANTEX SP 280 Suede Puff printed panel <20 ppm 20 mg/kg * Remark: *Eco Tex 100 (Group I ) Requirement. ppm (part per million) = mg / kg Total Uncertainity = ± 10.9%

4 R E S U L T S Page 4 of 8 QUALITATIVE TEST FOR POLYVINYLCLORIDE (PVC) BELSTEIN METHOD TESTED SAMPLE/COMPONENT RESULT COMMENT ANTEX Gold GS 618 Puff / ANTEX SP 280 Suede Puff printed panel. NO GREEN FLAME WAS OBSERVED Remark: *Client Requirement SUBMITTED SAMPLE DOES NOT CONTAIN POLYVINYL CHLORIDE (PVC)

5 R E S U L T S Page 5 of 8 Code Test Method Result Requirements TOTAL PHTHALATES CONTENT IN-HOUSE TEST METHOD (BY GAS CHRAMOTOGRAPHIC MASS SPECTROMETRIC (GC-MS) ANALYSIS) ANTEX Gold GS 618 Puff / ANTEX SP 280 Suede Puff printed panel. NAME CAS No RESULT REQUIREMENT Di-iso-nonyl phthalate DINP [ ] <10 ppm 0.1% Di-n-octyl phthalate DNOP [ <10 ppm (1000 ppm) Bis(2-ethylhexyl) phthalate DEHP [ ] <10 ppm Diisodecyl phthalate DIDP [ ] <10 ppm Benzyl butyl phthalate BBP [ ] <10 ppm Dibutyl phthalate DBP [ ] <10 ppm ppm (part per million) = mg / kg Detection Limit = 0,01 % (w / w) ND = Not Detected Total Uncertainity = ± 6%

6 R E S U L T S Page 6 of 8 ALKYL PHENOL ETHOXYLATES(APEO) IN HOUSE TEST METHOD NONYLPHENOL (NP), OCTYLPHENOL (OP), NONYLPHENOL ETHOXYLATES (NPEO) AND OCTYLPHENOL ETHOXYLATES (OPEO) CONTENT BY SOLVENT EXTARCTION AND FOLLOWED BY GAS CHROMATOGRAPHIC MASS SPECTROMETRIC (GC-MS) OR LIQUID CHROMATOGRAPHIC MASS SPECTROMETRIC (LC-MS) ANALYSIS. ANTEX Gold GS 618 Puff / ANTEX SP 280 Suede Puff printed panel. COMPOUND RESULT(ppm) NONYLPHENOL (NP) < 30 ppm OCTYLPHENOL (OP) < 30 ppm NONYLPHENOL ETHOXYLATES (NPEO) < 30 ppm OCTYLPHENOL ETHOXYLATES (OPEO) < 30 ppm ppm (part per million) = mg / kg

7 R E S U L T S Page 7 of (*)HEAVY METAL Extractable with artificial saliva solution ANTEX Gold GS 618 Puff / ANTEX SP 280 Suede Puff printed panel Antimony (Sb) <5 ppm 30 ppm * Arsenic (As) <0.2 ppm 0.2 ppm Nickel (Ni) < ppm Cadmium (Cd) < ppm Chromium (Cr) < ppm Chromium+6 (Cr+6) Under detection limit Under detection limit Lead (Pb) <0.2 ppm 0.2 ppm Cupper (Cu) <2 ppm 25 ppm Cobalt (Co) <0.25 ppm 1 ppm Mercury (Hg) <0.02 ppm 0.02 ppm *Eco Tex 100 (Group I ) Requirement. ppm (part per million) = mg / kg

8 R E S U L T S Page 8 of PCP/OPP/TeCP CONTENT DIN53316 (GC/MS and GC/ECD) ANTEX Gold GS 618 Puff / ANTEX SP 280 Suede Puff printed panel PCP (Pentachlorophenol) Not Detected 0.5 ppm * TeCP (Tetrachlorophenol) Not Detected 0.5 ppm OPP(Orthophenylphenol) Not Detected 100 ppm *Eco Tex 100 (Group I ) Requirement Remark: ppm (part per million ) = mg/kg Detection Limit = ppm Reporting Limit = 0,5 ppm Total Uncertainty = ± 5,7%