Installation Cookbook December 13, 2013

Tivoli Storage Manager for Virtual Environments Version 7.1 Installation Cookbook December 13, 2013 Art Roy IBM Tivoli Storage SW Advanced Technology/SWAT ajroy@us.ibm.com. IBM Tivoli Software 2013 IBM Corporation

This cookbook was created as a step-by-step guide for customers to get started with TSM for VE quickly and to hopefully eliminate confusion caused by the current product documentation. It is not meant to cover every aspect of the product but only to get the customer up and running as quickly as possible. The document assumes that the customer will use the TSM for VE Web Browser GUI or vcenter plug-in as well as the configuration wizard to configure the TSM for VE environment. This cookbook assumes a Windows based installation. 2

Installation Step Summary This is a summary of the steps which will be accomplished in this document 1. Verify Prerequisites 2. Install the TSM for VE software on the Primary vstorage Backup Server. 3. Configuration using the TSM for VE Web Browser GUI. 4. Adding a datamover a. Adding a datamover to the original vstorage Backup Server. b. Adding a datamover to a secondary vstorage Backup Server. c. Installation of the TSM for VE software on the secondary server. d. Configuration of the datamover option file and services. e. Adding a Second (or more) datamover to a vstorage Backup Server. 3

Prerequisites 4

TCP/IP Port Requirements Before beginning installation, please verify that the following ports are open on the vstorage Backup Server and not blocked by a firewall. TSM for VE ports 443 inbound and outbound 902 outbound 1527 inbound and outbound 9080 inbound 9081 inbound Standard TSM ports 1500 outbound 1501 inbound 1581 inbound (additional TSM ports required for additional datamovers, 1502, 1582, etc.) 5

TSM Server Requirements Ensure that there is an available Policy Domain and Storage Pool set up to hold the TSM for VE backups. 6

Tivoli Data Protection for VMware Installation 7

Tivoli Data Protection for VMware Installation Run Setup.exe 8

Tivoli Data Protection for VMware Installation Click Next 9

Tivoli Data Protection for VMware Installation Click Next 10

Tivoli Data Protection for VMware Installation Click Typical Installation 11

Tivoli Data Protection for VMware Installation No Input Required 12

Tivoli Data Protection for VMware Installation Accept the license terms and Click Install. Click Finish. 13

Tivoli Data Protection for VMware Installation No Input Required No Input Required 14

Tivoli Data Protection for VMware Installation Click Next Accept the terms of the license agreement and Click Next. 15

Tivoli Data Protection for VMware Installation Select the desired protection. Click Next. 16

Tivoli Data Protection for VMware Installation Select Register GUI as vcenter Plug-in, Enable access to the GUI by a web browser, or both, then click Next. 17

Tivoli Data Protection for VMware Installation Complete the vcenter login information. Click Next. 18

Tivoli Data Protection for VMware Installation Click Install. 19

Tivoli Data Protection for VMware Installation Click Install 20

Tivoli Data Protection for VMware Installation Click OK. Click OK. 21

Tivoli Data Protection for VMware Installation Click Finish. Click OK. 22

Tivoli Data Protection for VMware Installation Click Yes. The server will reboot. 23

Tivoli Data Protection for VMware Installation After the reboot, the InstallShield Wizard Completed page will appear. Click Finish. 24

Tivoli Data Protection for VMware Installation Verify the Automount and SAN Policy Settings TSM for VE requires automount to be disabled and the SAN policy set to OnlineAll. The TSM for VE installation process will set these automatically but the settings should be verified after installation is complete. C:\>diskpart DISKPART> automount DISKPART> san DISKPART> exit 25

Tivoli Data Protection for VMware Installation Verify the Automount and SAN Policy Settings If the settings are incorrect, set them as follows: C:\>diskpart DISKPART> automount disable DISKPART> automount scrub DISKPART> san policy OnlineAll DISKPART> exit 26

TSM for VE Configuration Run via the TDP for VMware Web Browser GUI 27

TSM for VE Configuration If you chose to enable access to the GUI via a web browser, the web browser will be automatically invoked after completion of the installation. If you wish to use the web GUI, click Continue to this website (not recommended). 28

TSM for VE Configuration Access the GUI via web browser to URL https://hostname:9081/tsmvmwareui/ or via the start menu from the vstorage backup server where the GUI is installed. Log in using vcenter Server credentials. 29

TSM for VE Configuration If you chose to Register the GUI as a vcenter Plug-in, you can also access the GUI from the Solutions and Applications section of vcenter. Whether you use the web browser access or the vcenter plug-in access, the interface will look the same. Click on Tivoli Data Protection for VMware. 30

TSM for VE Configuration Launching the GUI for the first time will automatically launch the Configuration Wizard. Click Next 31

TSM for VE Configuration Enter the required information to connect to your TSM server Enter the DNS name or IP address for the TSM Server. Modify the TSM Server port number if required. The default is 1500. Enter a TSM server Admin ID and Password. Check the box to save the ID and password. Click Next. 32

TSM for VE Configuration TDP for VMware requires several nodes to be defined on the TSM server. The configuration wizard will create the nodes. This screen gives the option to assign a common prefix to these nodes as well as to select a TSM policy domain. Enter a prefix for the TSM node names that will be generated. Note: The wizard will automatically place an underscore between what you type here and the rest of the node name. Verify the Policy domain to be used. Click Next. 33

TSM for VE Configuration Create the vcenter Node in TSM. This field will be pre-filled with a node name for the vcenter node in TSM. It consists of the node prefix if specified earlier followed by _VC followed by the vcenter name as shown in the vcenter. In this example it results in the name of VE7_VCVSPHERE-SRV. Your name will differ. You may modify the name if desired or use the generated default name. Check the Register Node box and enter a password for the new node. The new node will be registered in TSM with the specified password. Click Next. 34

TSM for VE Configuration Create the VMCLI Node. This field will be pre-filled with a node name for the VMCLI node in TSM. It consists of the node prefix, if specified earlier, followed by _VMCLI. In this example it results in the name of VE7_VMCLI. Your name will differ depending on the prefix you entered. You may modify the name if desired or use the generated default name. Check the Register Node box and enter a password for the new node. The new node will be registered in TSM with the specified password. Click Next. 35

TSM for VE Configuration Select the VMware Datacenters to be managed. In this example only one datacenter is available and was already selected by default. Click Next. 36

TSM for VE Configuration Create the Datacenter Node and Initial TSM Data Mover Node TSM node names for the datacenter and Data Mover are generated. The datacenter node name consists of the specified prefix followed by an underscore followed by the datacenter name. The Data Mover node name consists of the datacenter node name with a suffix of _DM. Each of these may be modified by highlighting the line containing the name and then either clicking on the node name or clicking on Edit Node Name. This example uses the defaults. Click Next. 37

TSM for VE Configuration Set the TSM node passwords for the Datacenter and Data Mover nodes Note that the passwords for each node have not been set. To set the password for a node, either highlight the line and click on Set Password, or click on Not Set. (see next page) 38

TSM for VE Configuration Set the TSM node passwords for the Datacenter and Data Mover nodes Enter a password for the selected node and click OK. 39

TSM for VE Configuration Set the TSM node passwords for the Datacenter and Data Mover nodes Repeat the Set Password process for the other node(s) until all nodes show Change in the Password column. Do NOT click Next yet. 40

TSM for VE Configuration Decide whether to allow the wizard to create the Data Mover services. Note the Create Services column with a checkbox for each Data Mover node. When this box is checked, the wizard will create the required option file and TSM client services for the Data Mover node. CAUTION: This checkbox should only be used for Data Mover nodes to be created on the vstorage backup server where this GUI is installed. (See next page) 41

TSM for VE Configuration When the Create Services box is checked for a particular Data Mover, the wizard will create the required option file and TSM client services for the Data Mover node. This is optional. You may still create the option files and services manually. IMPORTANT NOTE: At this time, this checkbox should only be used for Data Movers that reside on the server where the Web Browser GUI was installed. If you are adding a secondary vstorage backup server, the Data Mover option file and services must be created manually. If you leave the Create Services box checked when creating the additional Data Mover node definition, the option file and services will be created on the original vstorage backup server rather than on the new server. Further information will be provided in the section about adding Data Movers. 42

TSM for VE Configuration Decide whether to allow the wizard to create the Data Mover services. This is the first vstorage backup server so the box will be left checked. Click Next 43

TSM for VE Configuration The Summary page shows the Node Names that will be created in TSM. vcenter Node Name VMCLI Node Name Datacenter Node Name Data Mover Node Name Click Finish 44

TSM for VE Configuration This screen will monitor and show the results of the configuration wizard tasks If you receive a failure on the Verify Data Mover nodes task, it is likely due to the creation of the TSM services not yet being completed. Verification of the Data Mover node requires an active Client Acceptor service for the node. When all tasks complete successfully, click Close. See the following pages to retry the verification. Click the Close button. 45

TSM for VE Configuration Retrying the Data Mover verify. If you receive a failure on the Verify Data Mover nodes task, the Datacenter will show a warning icon. Click on the Datacenter Name. 12/13/2013 Currently there is an issue in the vcenter plug-in which does not set the vcenter credentials. This will prevent the datamover from being successfully validated. You must log into the vstorage backup server, start the BA Client GUI using the generated dsm.<datamover>.opt file and set the credentials using the preferences editor. Restart the CAD service for the datamover, then retry the validation. This is not an issue with the web browser GUI. See the following page. 46

12/13/2013 Use this procedure to set the vcenter credentials if the vcenter plug-in was used. 12/13/2013 Open a windows command prompt on the vstorage backup server. CD to the baclient folder. Issue the dir *.opt command to list the.opt files. Invoke the BA Client GUI using the correct.opt file. 12/13/2013 Update the Vmware Virtual Center User and Password. Click OK. Restart the CAD service for this datamover. Return to the plugin and retry the datamover validation. 47

TSM for VE Configuration Retrying the Data Mover verify. Highlight the Data Mover line and click Validate Selected Node. 48

TSM for VE Configuration Retrying the Data Mover verify. If the connection to the Client Acceptor service is successful, then the validation will be successful. The yellow warning symbol on the Datacenter will no longer appear and Host Name, Host Address, and Port will appear for the Data Mover node. 49

TSM for VE Configuration A query node command on the TSM server shows the TSM nodes created by the configuration wizard. A query proxy command on the TSM server shows the granted proxy authorities created by the configuration wizard. 50

TSM for VE Configuration A client option file will be created with the naming format dsm.<datamover>.opt 51

TSM for VE Configuration Copy the generated file to a file called dsm.opt. This the default option file used by the BA Client GUI and command line interfaces. This will allow the BA Client GUI and command line interfaces to be used for VM guest backup and full VM restore. Edit the dsm.opt file and add the asnodename parameter with the node name of the datacenter node. 52

TSM for VE Configuration The Backup VM and Restore VM options from the Actions pulldown in the BA Client GUI can now be used if desired, as well as the BA Client Command line backup vm command. 53

TSM for VE Configuration An example of the BA Client Backup VM screen. 54

Adding a Data Mover 55

Adding a Data Mover There are two places where Data Movers can be added. The first is on the original vstorage Backup Server where the Web Browser GUI has been installed. The second is any additional vstorage Backup Server. The Web Browser GUI allows you to create and configure the option file and TSM Client services required for the new Data Mover by using the Create Services checkbox on the Data Mover Nodes section of the Configuration Editor. Optionally you may elect to uncheck this box and create the option file and services manually. The Create Services checkbox should not be checked for Data Movers being added to secondary vstorage Backup servers. Data Movers that are created on secondary vstorage Backup servers must be configured manually. The Web Browser GUI is still used to register the Data Mover node name in the TSM server but the Create Services checkbox must not be checked. The option files and TSM Client services are then created manually using the TSM client interfaces on the vstorage Backup server. 56

Adding a Data Mover to the Original vstorage Backup Server 57

Adding a Data Mover to the Original vstorage Backup Server On the Configuration tab of the GUI, select Edit Configuration from the Tasks pulldown. Wait until the fields are populated and then click Data Mover Nodes. 58

Adding a Data Mover to the Original vstorage Backup Server Click the Add Datamover Node tab. A new data mover line will be added. 59

Adding a Data Mover to the Original vstorage Backup Server Optionally change the name of the datamover by clicking on the name or by highlighting the line and clicking Edit Node Name. Optionally modify the data mover node name. Then click on Not Set to set the node password. 60

Adding a Data Mover to the Original vstorage Backup Server Enter a password for the selected node and click OK. 61

Adding a Data Mover to the Original vstorage Backup Server Leave the Register Node box checked. Leave the Create Services box checked if you want the client option file and services to be created for you. Optionally uncheck the box if you want to create them manually. Click OK. 62

Adding a Data Mover to the Original vstorage Backup Server Note: If you are using the vcenter plugin, you will be requested to enter the vcenter credentials again. Enter the credentials, click OK, and the click OK again to complete the addition of the datamover. 63

Adding a Data Mover to the Original vstorage Backup Server This screen shows the new datamover with no warning errors. If the Datacenter shows a warning symbol, try to validate the datamover node again per earlier instructions. 64

Adding a Data Mover to the Original vstorage Backup Server These are the client option files created by the GUI. The files are created using the default schedmode of polling. If you prefer to use prompted, add the SCHEDMODE parameter as well as TCPCLIENTADDRESS and TCPCLIENTPORT. Be sure to specify a unique TCPCLIENTPORT port number for each datamover that resides on the same vstorage backup server. You may also wish to add the VMCTLMC option to direct the control files to a disk-based storage pool. dsm.ve7_datacenter-1_dm1.opt (option file for datamover node VE7_DATACENTER-1_DM1) NODename VE7_DATACENTER-1_DM PASSWORDAccess generate VMCHost 192.168.2.195 MANAGEDServices schedule webclient TCPServeraddress 192.168.2.246 TCPPort 1500 HTTPPORT 1581 COMMMethod tcpip ERRORLOGName "C:\Program Files\Tivoli\TSM\baclient\dsmerror.VE7_DATACENTER-1_DM.log" SCHEDLOGName "C:\Program Files\Tivoli\TSM\baclient\dsmsched.VE7_DATACENTER-1_DM.log" VMMAXParallel 4 VMCUSER administrator Note that the HTTPPORT port number is automatically incremented for each datamover added by the GUI. dsm.ve7_datacenter-1_dm2.opt (option file for datamover node VE7_DATACENTER-1_DM2) 65 NODename VE7_DATACENTER-1_DM2 PASSWORDAccess generate VMCHost 192.168.2.195 MANAGEDServices schedule webclient TCPServeraddress 192.168.2.246 TCPPort 1500 HTTPPORT 1582 COMMMethod tcpip ERRORLOGName "C:\Program Files\Tivoli\TSM\baclient\dsmerror.VE7_DATACENTER-1_DM2.log" SCHEDLOGName "C:\Program Files\Tivoli\TSM\baclient\dsmsched.VE7_DATACENTER-1_DM2.log" VMMAXParallel 4

Adding a Data Mover to the Original vstorage Backup Server This screen print shows the TSM Client Services that have been created. 66

Adding a Data Mover to a Secondary vstorage Backup Server (Note that you may also use this method to manually add Data Movers to the Original vstorage Backup Server) 67

Adding a Data Mover to a Secondary vstorage Backup Server From the Configuration tab, select Edit Configuration from the Tasks pull-down. 68

Adding a Data Mover to a Secondary vstorage Backup Server Wait for the Credential information to populate. This may take several seconds. 69

Adding a Data Mover to a Secondary vstorage Backup Server Click on Data Mover Nodes. 70

Adding a Data Mover to a Secondary vstorage Backup Server Click Add Datacenter Node. A new datamover name with a suggested name will be added. You may alter the name by clicking on it or by highlighting the line and clicking Edit Node Name. 71

Adding a Data Mover to a Secondary vstorage Backup Server In the Password column, click on Not Set and enter a password for the new TSM node. Click OK on the Enter New Password popup. 72

Adding a Data Mover to a Secondary vstorage Backup Server Uncheck the Create Services box. Leaving this box checked will create the option file and services on the server where the GUI is installed. Click OK. Uncheck 73

Adding a Data Mover to a Secondary vstorage Backup Server The new Datamover node has been created. Note that the Datacenter will have a warning icon. To correct that error, the option file and Client services must be created next. 74

Adding a Data Mover to a Secondary vstorage Backup Server Clicking on the Datacenter name shows the new datamover node not validated. 75

Adding a Data Mover to a Secondary vstorage Backup Server Installation of the TSM for VE Software 76

Adding a Data Mover to a Secondary vstorage Backup Server If not already completed, install the software on the secondary server. Use the same TSM for VE installation package to install the required software on secondary vstorage Backup Servers. Installing the Datamover Only is the equivalent of installing the TSM BA Client software as well as the TSM for VE enablement file. This version of TSM for VE includes the TSM Client software within the install package. Click Next 77

Adding a Data Mover to a Secondary vstorage Backup Server Click Next Click Advanced Installation. 78

Adding a Data Mover to a Secondary vstorage Backup Server Click Install the Data Mover only. No input required. 79

Adding a Data Mover to a Secondary vstorage Backup Server Accept the license terms and Click Install. Click Finish. 80

Adding a Data Mover to a Secondary vstorage Backup Server No input required. No input required. 81

Adding a Data Mover to a Secondary vstorage Backup Server Click Next. Accept the license agreement terms and click Next. 82

Adding a Data Mover to a Secondary vstorage Backup Server Select your Protection requirement and click Next. Optionally you can install the Recovery Agent. Click Next. 83

Adding a Data Mover to a Secondary vstorage Backup Server Click Install. No input required. 84

Adding a Data Mover to a Secondary vstorage Backup Server This question is only displayed if the installation was modified to include the Recovery Agent. Click Install. This information is only displayed if the installation was modified to include the Recovery Agent. Click OK. 85

Adding a Data Mover to a Secondary vstorage Backup Server Click Finish. Click OK. 86

Adding a Data Mover to a Secondary vstorage Backup Server This request is only displayed if the installation was modified to include the Recovery Agent. Click Yes to Reboot. If the installation was modified to include the Recovery Agent, this screen will appear after the reboot. Otherwise it will appear after installation is complete. Click Finish. 87

Adding a Data Mover to a Secondary vstorage Backup Server Verify the Automount and SAN Policy Settings TSM for VE requires automount to be disabled and the SAN policy set to OnlineAll. The TSM for VE 7.1 installation process will set these automatically but the settings should be verified after installation is complete. C:\>diskpart DISKPART> automount DISKPART> san DISKPART> exit 88

Adding a Data Mover to a Secondary vstorage Backup Server Verify the Automount and SAN Policy Settings If the settings are incorrect, set them as follows: C:\>diskpart DISKPART> automount disable DISKPART> automount scrub DISKPART> san policy OnlineAll DISKPART> exit 89

Adding a Data Mover to a Secondary vstorage Backup Server Configuration of the Datamover Option Files and Services (Note that you may also use this method to manually add Data Movers to the Original vstorage Backup Server) 90

Adding a Data Mover to a Secondary vstorage Backup Server Once the datamover (BA Client) software is installed the datamover node can be configured. This section shows how to build the option file for a Data Mover using the configuration wizard and Client Preferences Editor. You may also build the file manually using wordpad or notepad. Start the TSM Backup-Archive GUI on the secondary server. 91

Adding a Data Mover to a Secondary vstorage Backup Server A TSM Backup-Archive Client option file does not yet exist so the TSM Client Configuration Wizard is invoked automatically. Click Next 92

Adding a Data Mover to a Secondary vstorage Backup Server Click Next 93

Adding a Data Mover to a Secondary vstorage Backup Server Enter the TSM node name for the Data Mover that was registered using the web GUI Click Next 94

Adding a Data Mover to a Secondary vstorage Backup Server Enter the TSM Server information. Click Next 96

Adding a Data Mover to a Secondary vstorage Backup Server Click Apply 100

Adding a Data Mover to a Secondary vstorage Backup Server Enter the TSM password for the Data Mover node that was entered in the web GUI. Click Login. Click Finish 101

Adding a Data Mover to a Secondary vstorage Backup Server Open the Client Preferences selection from the Edit pulldown 102

Adding a Data Mover to a Secondary vstorage Backup Server The Node Name field should be automatically filled. If not, wait for it to appear before continuing. In the As Node Name field, enter the node name for the datacenter that was created during the web GUI wizard. Modify the error log file name to include the datamover name. Check the Prune old entries box and enter the desired value. Click Apply 103

Adding a Data Mover to a Secondary vstorage Backup Server Click OK to the Warning message. This message will appear several times through the next steps. Click OK each time. 104

Adding a Data Mover to a Secondary vstorage Backup Server Click the Scheduler tab. Select Prompted Enter the DNS name or IP address of the client. This is the server you are currently on. Modify the schedule log file name to include the datamover name. Check the Prune old entries box and enter the desired value. Click Apply 105

Adding a Data Mover to a Secondary vstorage Backup Server Click the Authorization tab. Select Password Generate Click Apply 106

Adding a Data Mover to a Secondary vstorage Backup Server Click the Web Client tab. Click Both Click Apply 107

Adding a Data Mover to a Secondary vstorage Backup Server Click the VM Backup tab. Enter the vcenter Server Address, User, and Password Click Apply 108

Adding a Data Mover to a Secondary vstorage Backup Server Click OK to acknowledge the Warning. Click OK on the Preferences Editor. Exit from the TSM Backup-Archive GUI 109

Adding a Data Mover to a Secondary vstorage Backup Server The TSM Backup-Archive Client options file should look similar to this and can be found in C:\Program Files\Tivoli\TSM\baclient\dsm.opt 110

Adding a Data Mover to a Secondary vstorage Backup Server Go to the C:\Program Files\Tivoli\TSM\baclient folder. Make a copy of the dsm.opt file, appending the Data Mover node name to the new file name. You should end up with two files. For example: dsm.opt dsm.opt.ve7_datacenter-1_dm3 111

Adding a Data Mover to a Secondary vstorage Backup Server Edit the new file and remove the ASNODENAME line. Save and exit from the file. Do not remove the line from the dsm.opt file. Delete this line 112

Adding a Data Mover to a Secondary vstorage Backup Server Start the TSM Backup-Archive Client GUI. Enter the password for the Data Mover node. The password will be remembered after this entry. 113

Adding a Data Mover to a Secondary vstorage Backup Server From the Utilities pulldown, select the Setup Wizard. 114

Adding a Data Mover to a Secondary vstorage Backup Server Check the boxes to configure the TSM Web Client and the TSM Client Scheduler. The Web GUI and vcenter Plug-in communicate with the Data Mover via the TSM Web Client ( TSM Client Acceptor service). Click Next 115

Adding a Data Mover to a Secondary vstorage Backup Server Add the Data Mover node name after TSM Client Acceptor Click Next 118

Adding a Data Mover to a Secondary vstorage Backup Server Change the Option File Name to the dsm.opt.nodename file that you created earlier by copying the dsm.opt file. Click Next 119

Adding a Data Mover to a Secondary vstorage Backup Server Enter the TSM password for the Data Mover node name Click Next 121

Adding a Data Mover to a Secondary vstorage Backup Server Select Automatically when Windows boots Click Next 122

Adding a Data Mover to a Secondary vstorage Backup Server Add the Data Mover node name after TSM Remote Client Agent Click Next 123

Adding a Data Mover to a Secondary vstorage Backup Server Add the Data Mover node name after TSM Client Scheduler Check this box Click Next 130

Adding a Data Mover to a Secondary vstorage Backup Server Validate that the correct Client Acceptor is used. Click Next 131

Adding a Data Mover to a Secondary vstorage Backup Server Modify the log file names to include the Data Mover name. Uncheck this box Click Next 132

Adding a Data Mover to a Secondary vstorage Backup Server Click Finish 134

Adding a Data Mover to a Secondary vstorage Backup Server Start the TSM Client Acceptor service for this Data Mover. 135

Adding a Data Mover to a Secondary vstorage Backup Server Return to the web GUI or vcenter Plug-in Highlight the Data Mover and click Validate Selected Node 136

Adding a Data Mover to a Secondary vstorage Backup Server Note that the Host Name, Host Address and Port columns are now complete and the Datacenter Warning symbol is gone 137

Adding a Second (or more) Data Mover to a vstorage Backup Server Configuration of the Datamover Option Files and Services (Note that you may also use this method to manually add Data Movers to the Original vstorage Backup Server) 138

Adding a Second (or more) Data Mover to a vstorage Backup Server 1) Define the datamover using the Edit Configuration task of the Web GUI. 2) Copy an existing datamover dsm.opt.datamover file to create an option file for the new datamover. 3) Update the new dsm.opt.datamover file, modifying the NODENAME, ERRORLOGNAME, and SCHEDLOGNAME parameters with the new datamover name. 4) Update the HTTPPORT and TCPCLIENTPORT port numbers so they are unique from the other datamovers on this server. 5) Open a Windows command prompt. 6) CD \program files\tivoli\tsm\baclient 7) Invoke the BA Client GUI using the newly created option file: dsm -optfile=dsm.opt.datamover 7) Enter the node password for the new datamover. 8) Create the TSM Client services per earlier instructions. 9) Start the TSM Client Acceptor service for the new datamover 10) Validate the datamover in the Web GUI. 139

Next Steps Click the Backup tab in the web GUI or vcenter Plug-in to start scheduling backups. Click Create Schedule to schedule a new backup. 140