Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures. Goliath Performance Monitor Installation Guide v11.

Size: px
Start display at page:

Download "Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures. Goliath Performance Monitor Installation Guide v11."

Transcription

1 Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures Goliath Performance Monitor Installation Guide v11.6 (v11.6) Document Date: August

2 Legal Notices Inc. All rights reserved. Goliath Technologies believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED AS IS. GOLIATH TECHNOLOGIES MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Use, copying, and distribution of any Goliath Technologies software described in this publication requires an applicable software license. Linux is a registered trademark of Linus Torvalds. Windows is a registered trademark of Microsoft Corporation. VMware, ESX, ESXi, vcenter, and vsphere are either trademarks or registered trademarks of VMware Corporation. Citrix, Xen, XenServer, and XenCenter are either trademarks or registered trademarks of Citrix Systems Inc. All other trademarks and copyrights referred to are the property of their respective owners. 2

3 Support, Sales, Renewals and Licensing For information on new sales, licensing and support renewals you can For additional information about Goliath Technologies products and services, go to For customers and partners with an active support agreement, you can use the support web board or for information about software patches, technical documentation, and support programs. Note: A valid support agreement is necessary to receive new release and software updates. 3

4 Table of Contents I. Deployment Architecture... 5 II. Goliath Performance Monitor Installation Prerequisites... 6 III. Goliath Performance Monitor Server Installation Steps... 7 IV. Configure VMware & XenServer Monitoring A. Configure VMware vsphere ESX/ESXi API Integration B. Configure Citrix XenServer API Integration V. Configure Citrix XenApp Monitoring A. Configure XenApp Server Monitoring VI. Configure Citrix XenDesktop Monitoring A. Configure XenDesktop DDC VII. Appendix: A. Manual Windows Agent Install Manual Agent Installer B. Command Line C. GPM Linux/Unix Agent Install Install Steps D. Installing the Goliath Performance Monitor Plug-in for XenCenter E. Installing the Goliath Performance Monitor Plug-in for vcenter F. Connecting to a Remote SQL Server G. Configuring the Inventory Filter

5 I. Deployment Architecture This diagram shows how the Goliath Performance Monitor fits into the environment. 5

6 II. Goliath Performance Monitor Installation Prerequisites Note: On Windows Server 2012,.NET 3.5 SP1 needs to be installed from the Features Wizard as.net 4.5 is not backwards compatible. To view documents, please have a PDF reader available. GPM can be accessed over the network or WAN to your local computer Table 1 - Goliath Performance Monitor System Requirements Goliath Performance Monitor Server Platform: Virtual Machine or Physical Server OS: Windows Server 2008 R R2 64bit Network: Static IP Address vcpu: Minimum of 8 vcpus Memory: Minimum of 12 GB Memory Disk: 25 GB of Disk Space Dependencies:.NET 3.5 SP1 Firewall Database Agent VMware Citrix XenServer XenApp / XenDesktop Goliath Performance Monitor Server: TCP ports 80 & 82 both must be open inbound; and port 80 must be enabled outbound for remote access to the console. Systems with Agents Deployed: TCP port 82 must be open outbound Note: These ports can be changed from the default as needed Embedded: Microsoft SQL 2008 R2 Express Version: Microsoft SQL from , including SQL Express *Microsoft SQL Express 2008 R2 database is the embedded database option included with Goliath Performance Monitor Note: Environments larger than 150 monitored devices require Microsoft SQL Server. Customers Evaluating with XenApp & XenDesktop should use full Microsoft SQL. Platform: Virtual Machine or Physical Server OS: Windows NT SP6a and Newer; Unix/Linux, and Mac Performance Specs: 0.1% CPU, 1.5 MB size on Disk, ~50 MB RAM on XenDesktop, ~80 MB RAM on XenApp API Integration: Service account with admin rights VMware ESX/ESXI Version: 4.0 to 6.0 API Integration: Root account needed XenServer Version: 5.5 and newer Citrix Versions: XenApp XenDesktop XenApp/XenDesktop 7.x:.Net 3.5 SP1 and Service Account with Citrix Admin Rights for the Goliath Performance Monitor Agent required on the broker XenApp: Powershell 2.0 needed. For XenApp 7.x.NET 3.5 needed on all Windows 2012 session hosts. XenDesktop VDI: Powershell 2.0 needs to be installed. For XenDesktop 7.x.NET 3.5 needed on all Windows 8 10 Virtual Desktops. Note: Full Microsoft SQL suggested for XenApp & XenDesktop deployments 6

7 III. Goliath Performance Monitor Server Installation Steps Before you install Goliath Performance Monitor: In order to complete the installation of Goliath Performance Monitor (GPM), please ensure you have the following items available and prepared. 1. Goliath Performance Monitor installation files 2. Your license key 3. Static IP applied to the server hosting Goliath Performance Monitor Use the correct version of the install program: There are two versions of the install program: one for 32-bit versions of Windows (gpmserver_setup32.exe) and one for 64-bit versions of Windows (gpmserver_setup64.exe) Install Goliath Performance Monitor The Setup program will install the Goliath Performance Monitor server on the system you want to be designated as the Server computer. 1. Exit all programs 2. To install GPM, run the downloaded executable, either gpmserver_setup32.exe or gpmserver_setup64.exe 3. The executable will start the install process and display a Welcome installer 7

8 4. Click Next to view the End User License Agreement. Note: It is strongly recommended that you exit all open Windows programs before continuing with the installation 5. Read the agreement and if you agree with the terms, select I agree to the terms of this license agreement and click Next. If you do not agree or do not wish to continue, select I do not agree to the terms of this license agreement and click Cancel to exit the installer. 8

9 6. You are then prompted to provide your information to register the product. 7. Enter your Goliath Performance Monitor license key provided by Goliath Technologies, or if you have downloaded Goliath Performance Monitor for evaluation, enter EVAL as the license key to enable the full featured version for 30 days and select Next to continue. 9

10 8. Please verify the STATIC IP Address or DNS Name for the Goliath Performance Monitor Server and Console Port select Next to continue. 9. Once Next is selected, the wizard will verify that the Console Port is available. It is, Goliath Performance Monitor will then connect to it. 10

11 10. The next step lets you select where to install the Goliath Performance Monitor program. On 32-bit versions of Windows, the default location is C:\Program Files\ MonitorIT. On 64-bit versions of Windows, the default location is C:\Program Files (x86)\monitorit. When the location is entered, click Next to continue. Note: It is recommended that you use the default location. 11. If this is a full installation with an official license key you will see the following options for configuring the database settings. For Manual Configuration please see Appendix F for instructions. If you have an EVAL key, please move to the next step as this is not applicable. 11

12 12. Now please verify that the following installation settings are correct, if so select Next to proceed with the installation. 13. During the installation process, a progress bar will show the progress of installing the Goliath Performance Monitor, as seen in the figure below. You will also see the installation of the SQL Express database. 12

13 14. Once Goliath Performance Monitor is successfully installed, the remaining database components will be installed and configured. At some points during these additional installations, your screen may go blank. This is a normal part of the installation process. Finally, the install program will display a message that the installation is complete. Click Finish to exit the install program 15. You have successfully installed Goliath Performance Monitor and can now launch the application. 13

14 IV. Configure VMware & XenServer Monitoring This section will walk you through the discovery and configuration process for adding VMware vsphere ESX/ESXi, Citrix XenServer and their subsequent virtualized guest machines and storage to your Goliath Performance Monitor inventory. For step-by-step instructions on configuring the Goliath Performance Monitor Plug-in for VMware vcenter and Citrix XenServer please see Appendix C (XenCenter) and Appendix D (VMware) Note: It is recommended to begin by configuring your virtual hosts (vsphere ESX/ESXi & XenServer, before deploying Agents. This will populate your Goliath Performance Monitor inventory with all the relative guest VMs and storage per host. 14

15 A. Configure VMware vsphere ESX/ESXi API Integration 1. From the First Time Run Wizard, select the icon for Virtual Server Note: If the First Time Run Wizard does not appear, go to Settings. Under Tools select First Time Run Wizard 2. Check VMware and then select the Next button NOTE: If you would like to filter in or filter out particular hosts, VMs and or Datastores, please see Appendix G for instructions on how to use the Inventory Filter button. 3. You will be prompted for the connection information on the Provide Credentials page: 4. Select Next once completed 15

16 5. Select the Hosts that you wish to add for monitoring and select Next 6. Select the option Finish and then Next. Then Finish to return back to the Monitor Dashboard screen Note: At this point you may continue to add additional hosts by selecting Repeat Virtual to repeat the wizard steps to add additional servers. 16

17 B. Configure Citrix XenServer API Integration 1. From the First Time Run Wizard, select the icon for Virtual Server 2. Check XenServer and then select the Next button NOTE: If you would like to filter in or filter out particular hosts, VMs and or Datastores, please see Appendix G for instructions on how to use the Inventory Filter button. 3. You will be prompted for the connection information on the Provide Credentials page: 4. Select Next once completed 17

18 5. Select the Hosts that you wish to add for monitoring and select Next 6. Select the option Finish and then Next. Then the button Finish to return back to the Monitor Dashboard screen Note: At this point you may continue to add additional hosts by selecting Repeat Virtual to repeat the wizard steps to add additional servers. 18

19 V. Configure Citrix XenApp Monitoring These steps will take you through the configuration process to begin monitoring Citrix XenApp to automatically collect XenApp Farm Inventory, User Session Data, and enable Health Check Monitoring. Note: Windows 2003 and 2008 users will need to install the PowerShell feature. For XenApp 7.x, if the DDC and or App servers are running Windows Server 2012, you must install.net 3.5 A. Configure XenApp Server Monitoring 1. From the First Time Run Wizard, select the icon for XenApp & XenDesktop 2. Check Citrix XenApp and then select the Next button NOTE: If you would like to filter in or filter out particular delivery groups, folders or servers please see Appendix G for instructions on how to use the Inventory Filter button. 19

20 3. You will be prompted for the connection information on the Configure XenApp Integration page. 4. The Agents on the server will be deployed automatically, then click the Next button 20

21 5. An Add XenApp Role Servers page will appear If you would like to add in your Role Servers select Add and enter in the Role Server information and select Apply. Repeat this process for all Role Servers, when finished select Next 21

22 While the role servers deploy you will see a loading screen. When they are finished you will see the status of the deployments. If all were successful select Next. This will take you to the Finish page, see step 7 for further instructions. 6. If you don t want to add any Role Servers at this time you can select Next. NOTE: A disclaimer may popup for not adding role servers, select ok to bypass it and continue 7. The Save and Finish screen will now appear. To add more items to your inventory select Configure More to repeat steps 1 7. Or select Finish to return back to the Monitor Dashboard screen 22

23 VI. Configure Citrix XenDesktop Monitoring These steps will take you through the configuration process to begin monitoring Citrix XenDesktop for the automatic Broker inventory and user VDI data collection. Note: Windows 2008 Enterprise users will need to install the PowerShell feature. For XenDesktop 7.x, if the DDC is running Windows Server 2012 you will need to install.net 3.5 For XenDesktop 7.x, if your VDI or Session Hosts are running Windows Server 2012 or Windows 8 you will need to install.net 3.5 A. Configure XenDesktop DDC 1. From the First Time Run Wizard, select the icon for XenApp & XenDesktop 2. Check Citrix XenDesktop and then select the Next button NOTE: If you would like to filter in or filter out particular delivery groups or VDI please see Appendix G for instructions on how to use the Inventory Filter button. 23

24 3. You will be prompted for the connection information on the Configure XenDesktop Integration page: 4. The Agents on the server will be deployed automatically, then click the Next button 24

25 5. An Add XenDesktop Role Servers page will appear If you would like to add in your Role Servers select Add and enter in the Role Server information and select Apply. Repeat this process for all Role Servers, when finished select Next 25

26 While the role servers deploy you will see a loading screen. When they are finished you will see the status of the deployments. If all were successful select Next. This will take you to the Finish page, see step 7 for further instructions. 6. If you don t want to add any Role Servers at this time you can select Next. NOTE: A disclaimer may popup for not adding role servers, select ok to bypass it and continue 7. The Save and Finish screen will now appear. To add more items to your inventory select Configure More to repeat steps 1 7. Or select Finish to return back to the Monitor Dashboard screen 26

27 VII. Appendix: The supplement will guide you step-by-step through the process of manually deploying Windows Agents, Linux/Unix Agents, configuring the plug-in for Citrix XenCenter & VMware vcenter, and how to connect to a remote database. A. Manual Windows Agent Install Note: This section will provide information on how to manually deploy agents. This process is done one of two ways: through the Command Line or by the Agent Installer. Manual Agent Installer 1. Enter the URL: (replacing GPMServerIP Address with the IP address for the Goliath Performance Monitor Server) 2. The download wizard will appear, once the download wizard is complete, the installation wizard will appear 27

28 3. Click Next and proceed through the wizard If prompted, Click Continue on the UAC to continue with install Enter the Goliath Performance Monitor Server IP Address, leave Goliath Performance Monitor server Port as 82 if using defaults. You can also specify a name the Agent should use for this server (This is Optional) 28

29 Confirm Install directory and Click Next to continue with the installation Review the install information and Click Next to Continue with Install 29

30 This screen will appear while it is installing Click Finish to complete Installation There is no need to reboot the server. The GPM Agent will automatically attempt connection to the GPM Server after about a 30 second delay. Once the GPM Agent connects, it will automatically register. 30

31 B. Command Line 1. Open command prompt (use RunAsAdmin on Windows 2008), and perform the following commands: cd C:\Program Files\MonitorIT : Then AgentService.exe i arg1 82 C:\Program Files\MonitorIT\RpmAgent.exe arg2 Arg1: Goliath Performance Monitor Server IP address (e.g ) so the Agent knows where to connect; 82: This is the default port on which Goliath Performance Monitor listens for Agents. Note: If you have changed the port Goliath Performance Monitor uses by default, then make sure that is reflected here. Arg2, OPTIONAL: The name that the Agent uses for this server/workstation when it connects and registers with the GPM Server. For example, AgentService.exe i C:\Program Files\MonitorIT\RpmAgent.exe 2. Start the Goliath Performance Monitor Agent Service. From the command prompt: AgentService.exe s There is no need to reboot the server. The GPM Agent will automatically attempt connection to the GPM Server after about a 30 second delay. Once the GPM Agent connects, it will automatically register. Note: If you have multiple farms, you will need to deploy an agent to each collector 31

32 C. GPM Linux/Unix Agent Install The Linux/Unix Agent is platform agnostic across all Linux/Unix variations including Solaris, HP-UX, IBM and AIX. For Fedora Core, run the following command: yum install java For Debian Core, run the following command: sudo apt-get install openjdk-6-jre Install Steps 1. In the GPM Server Install Path > GPM\Bin folder, find and copy the two files, 'MITAgent.jar' and MonitorITAgentStart.jar to a folder of your choice on the Linux/Unix Server, for example /opt/gpm 2. Open the command prompt from the directory where you copied the files: nohup /FullyQualifiedPathToTheInstalledJava/bin/java -cp MonitorITAgentStart.jar AgentStart -s GPMIPAddress -p 82 & For example, to connect back to GPM server at when the java program is located at /usr/bin the installation command would be: nohup /usr/bin/java -cp MonitorITAgentStart.jar AgentStart -s p 82 & 3. Put the command in your rc.local file or equivalent so the Agent will run on start-up. 4. If your rc.local file is located in /etc you would perform the following commands from the console command prompt: 5. Open the rc.local file to edit: vi /etc/rc.local 6. Find the last line in the file and append the install command used earlier by using the vi insert command: i 7. Using the example from earlier, where the agent files are located at /opt/gpm and the GPM server is located at , you would enter: nohup /usr/bin/java -cp /opt/gpm/monitoritagentstart.jar AgentStart -s p 82 & 32

33 8. Click the Esc key to exit insert mode, and enter the command to save and close: wq! 9. Once the Agent is installed, you will be able to subsequently update it remotely from the central GPM Server display called 'Manage Agents' available in Configure > Servers/Agents & Devices D. Installing the Goliath Performance Monitor Plug-in for XenCenter The Goliath Performance Monitor Plug-in for XenCenter allows you to access Goliath Performance Monitor from a tab within the Citrix XenCenter client application. 1. Go to the Setup page under the Configure Tab. 2. Launch the VMware, XenServer, or Hyper-V Environment wizard by clicking on the icon 3. Select Citrix XenServer under Step 1 4. Select Launch Wizard 5. Select Next past the Add Inventory Page and the Licensing Page to the last page. 6. Select Install Plug-In to XenCenter 7. Click save to download the xencenter_plugin.zip file prompt 8. You will need to extract the Installer Package and run to launch the Setup Wizard 9. Click Next and the End User License agreement opens 10. Review the agreement and accept the terms to continue. Then click Next and the Goliath Performance Monitor Server page opens. 33

34 11. Before entering the URL and continuing, open Internet Explorer and load the Goliath Performance Monitor client web page. 12. Copy the URL from the address bar in IE into the edit field in the Goliath Performance Monitor Plug-in install screen. We recommend you select the URL with the top.html in IE, copy it, and then paste the URL into the install screen. Make sure the two URLs match. 13. When the two URLs are a correct match, click Next and the Ready to Install Goliath Performance Monitor Plug-in page opens. 14. Click Install to install the XenCenter Plug-in. 15. When the installation completes, click Finish to close the wizard. 34 Launch XenCenter and you will see a new tab labeled MonitorIT which displays the full Goliath Performance Monitor client within XenCenter.

35 E. Installing the Goliath Performance Monitor Plug-in for vcenter The Goliath Performance Monitor Plug-in for VMware vcenter allows you to access Goliath Performance Monitor from a tab within the VMware vcenter interface. The plug-in is located within the configuration wizard for VMware monitoring, but can be performed at any time. 1. Go to the Setup page under the Configure Tab. 2. Launch the VMware, XenServer, or Hyper-V Environment wizard by clicking on the icon 3. Select VMware vsphere under Step 1 4. Select Launch Wizard 5. Select Next past the Add Inventory Page and the Licensing Page to the last page. 6. Select Install Plug-In to vcenter 7. Confirm the credentials Goliath Performance Monitor will use to install the plug-in to vcenter and then select Install Note: A pop-up box will display any success or failure messages. You can only install the plug-in once to a particular vcenter and trying to install subsequent times will cause vcenter to return an error. 8. Once the install is completed, a Success dialog will be presented and you can exit the wizard. Now launch the vsphere Client and connect to vcenter to see the new tab labeled MonitorIT which displays the full Goliath Performance Monitor Client. You can optionally go back to the Home screen and launch Goliath Performance Monitor in full screen from the Administration section. 35

36 F. Connecting to a Remote SQL Server In this section, we will review the procedure for connecting to a Remote SQL Server Instance from the Installer. See below a link to download the Goliath Performance Monitor database file; Prepare the Database Files Prior to setting up the new server you will need to ensure that the original Goliath Performance Monitor SQL Database file is ready to be moved and the new SQL Server is up and running. 1. Stop the MonitorIT service 2. Detach the database and copy it from its current location, to the new SQL Server directory 3. Management Studio is available to connect to the new SQL Server to facilitate setting up the database. Stopping the MonitorIT Service In this section you will learn how to stop the MonitorIT service. 1. Log into the server running SQL Express 2. Open Windows Services by going to Control Panel > System and Security > Administrative Tools and double clicking Services 36

37 3. The Services window will appear, locate and select MonitorIT Server Service from the list 4. Click Stop the service to the right NOTE: A Service Control window with a progress bar with appear displaying the progress of the service being stopped. Once finished it will disappear. 37

38 Backing up the old database Now that the service is stopped we can bring the old SQL Express database to the new SQL Server 1. Open SQL Server Management Studio and Navigate to the MonitorIT database 2. Right click the database, and go to Tasks and then click Backup 3. A Backup Database window will appear, click the Add button at the bottom to choose the backup destination 38

39 4. A pop up will appear to choose the file name location, once finished select OK 5. Then selection OK on the Backup Database window and the database will begin to back up. Note: The backup process can take anywhere from 5 to 20 minutes to back up depending on the size of the database. Configure the new SQL Server In this section we will cover the steps necessary to attach your Goliath Performance Monitor SQL Express Database to the new SQL Server Database. Attach the new database 1. Open SQL Server Management Studio on the new SQL Server 2. Right click on Databases and choose Restore Database.. 39

40 3. The Restore Database window will appear, use the drop down menus to select the database you backed up. 4. Once the database is selected click the Verify Backup Media Button 5. Select OK to complete attaching the database. 40

41 Connect Goliath Performance Monitor to your SQL Database In this section we will cover the steps necessary to complete the final steps in the migration process by creating the necessary DSNs and appropriately modifying the windows service. NOTE: If Goliath Performance Monitor will be located on a different server, check the security properties for this database. There should be a Windows User with DBO rights to the database. This information will be needed for this section if applicable. Create the Database DSNs This section will cover the process for creating a connection to the database you have just attached to SQL. 1. Log into your Goliath Performance Monitor Server 2. Open the Run window and type C:\Windows\SysWOW64\odbcad32 3. Once open, go to the System DSN tab: Note: If you have an existing DSN for BreakoutRPM name, select configure and rename it to BreakoutRPM.Old 41

42 4. Next click Add and scroll through the list to select the driver type: a. For local SQL Server instances: choose SQL Server Native Client b. For remote SQL Server instances: choose SQL Server 5. Name the connection with the information listed below, when finished click Next a. Define the Name as BreakoutRPM b. Define Description as Primary GPM Database c. For Server use the dropdown menu to pick the appropriate server name 42

43 Note: For the SQL Server, be sure to pick the choice with the name in the correct format of the server name/instance name of the new database from the dropdown menu. 6. Keep the default settings to use the Integrated Windows authentication to connect to the database and select Next 7. Check the box next to Change the default database to and select MonitorIT from the dropdown menu. Click Next 8. Keep the defaults for the additional options and click Finish 9. Select the Test Data Source button to validate the connection. Click OK to close all windows a. If your SQL Server is local, go to Windows Services and restart the MonitorIT Server Service (Steps to do this are in Section III) and then once it is finished, restart MonitorIT server. b. If your SQL Server is remote go on to the next section for one last step Configure the MonitorIT Windows Service for Remote SQL Databases When connecting to a remote SQL Server, it is necessary to modify the MonitorIT Server Windows Service with the appropriate logon rights to access the database. 1. Open Windows Services by going to Run and typing Services.msc 2. Find the MonitorIT Server Service in the list, right mouse click, and choose Properties 3. Go to the Log on tab 43

44 4. Specify a Windows account that has DBO rights to the MonitorIT database you attached on the SQL Server (we recommend using the Browse function to ensure the account gets validated). 5. Click Apply and then OK to close the window 6. Select Start Service and then Restart the Service. 7. Once that is done, restart the Monitor IT Server 8. When the server is back up and running you have completed the configuration! 44

45 G. Configuring the Inventory Filter This feature of Goliath allows one to filter in or out particular elements from their VMware, XenServer and Citrix environment. With our API integrations, Goliath is able to populate the entire inventory, but due to the size of your environment, you may not want to see and monitor all components. In this section, I will explain how to use the inventory filter. Inventory Filtering from the First Time Run Wizard The INCLUDE section: Select a Server or Group TYPE from the dropdown list. Then type a comma-delimited list of Server or Group names you want included in Inventory. All other Servers or Groups not listed for the selected TYPE are ignored. Start each Inventory specification on a new line. Multiple entries of the same or different TYPE allowed. The wild-card, asterisk character, '*', is accepted as the first or last character in a name. The EXCLUDE section: Select a Server or Group TYPE from the dropdown list. Then type a comma-delimited list of Server or Group names you want excluded from Inventory. All other Servers or Groups not listed for the selected TYPE are included in inventory. Start each Inventory specification on a new line. Multiple entries of the same or different TYPE allowed. The wild-card, asterisk character, '*', is accepted as the first or last character in a name. 45

46 Inventory Filtering from the Inventory Screen The INCLUDE section: Select a Server or Group TYPE from the dropdown list. Then type a comma-delimited list of Server or Group names you want included in Inventory. All other Servers or Groups not listed for the selected TYPE are ignored. Start each Inventory specification on a new line. Multiple entries of the same or different TYPE allowed. The wild-card, asterisk character, '*', is accepted as the first or last character in a name. The EXCLUDE section: Select a Server or Group TYPE from the dropdown list. Then type a comma-delimited list of Server or Group names you want excluded from Inventory. All other Servers or Groups not listed for the selected TYPE are included in inventory. Start each Inventory specification on a new line. Multiple entries of the same or different TYPE allowed. The wild-card, asterisk character, '*', is accepted as the first or last character in a name. Once the list of items you d like to include/exclude are complete, select ok Find the items in inventory that you ve chosen to exclude or are items that you haven t chosen to include and delete them from inventory 46

Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures. Goliath Performance Monitor Installation Guide v11.

Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures. Goliath Performance Monitor Installation Guide v11. Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures Goliath Performance Monitor Installation Guide v11.5 (v11.5) Document Date: March 2015 www.goliathtechnologies.com

More information

simplify monitoring Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures

simplify monitoring Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures simplify monitoring Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures Simplify Monitoring Installation Guide 11.4 (v11.4) Document Date: February 2015 www.tricerat.com

More information

Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures. Goliath Performance Monitor Installation Guide v11.

Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures. Goliath Performance Monitor Installation Guide v11. Consolidated Monitoring, Analysis and Automated Remediation For Hybrid IT Infrastructures Goliath Performance Monitor Installation Guide v11.6 (v11.6) Document Date: June 2016 www.goliathtechnologies.com

More information

SQL Express to SQL Server Database Migration Goliath Performance Monitor v11.5

SQL Express to SQL Server Database Migration Goliath Performance Monitor v11.5 Goliath Performance Monitor v11.5 (v11.5) July 2015 www.goliathtechnologies.com Legal Notices Guide for Goliath Performance Monitor v11.5 Copyright 2014 Goliath Technologies Inc. All rights reserved. www.goliathtechnologies.com

More information

Goliath Performance Monitor Prerequisites v11.6

Goliath Performance Monitor Prerequisites v11.6 v11.6 Are You Ready to Install? Use our pre-installation checklist below to make sure all items are in place before beginning the installation process. For further explanation, please read the official

More information

simplify monitoring Environment Prerequisites for Installation Simplify Monitoring 11.4 (v11.4) Document Date: January 2015 www.tricerat.

simplify monitoring Environment Prerequisites for Installation Simplify Monitoring 11.4 (v11.4) Document Date: January 2015 www.tricerat. simplify monitoring Environment Prerequisites for Installation Simplify Monitoring 11.4 (v11.4) Document Date: January 2015 www.tricerat.com Legal Notices Simplify Monitoring s Configuration for Citrix

More information

SQL Express to SQL Server Database Migration MonitorIT v10.5

SQL Express to SQL Server Database Migration MonitorIT v10.5 SQL Express to SQL Server Database Migration MonitorIT v10.5 (v10.5) March 2013 www.goliathtechnologies.com Legal Notices MonitorIT v10.5 Installation Guide Inc. All rights reserved. www.goliathtechnologies.com

More information

Consolidated Monitoring, Analysis, and Automated Remediation For Hybrid IT Infrastructures

Consolidated Monitoring, Analysis, and Automated Remediation For Hybrid IT Infrastructures Consolidated Monitoring, Analysis, and Automated Remediation For Hybrid IT Infrastructures Goliath Performance Monitor Quick Start Configuration Guide v11.5 (v11.5) Document Date: April 2015 www.goliathtechnologies.com

More information

PHD Virtual Backup for Hyper-V

PHD Virtual Backup for Hyper-V PHD Virtual Backup for Hyper-V version 7.0 Installation & Getting Started Guide Document Release Date: December 18, 2013 www.phdvirtual.com PHDVB v7 for Hyper-V Legal Notices PHD Virtual Backup for Hyper-V

More information

Quick Start Guide for VMware and Windows 7

Quick Start Guide for VMware and Windows 7 PROPALMS VDI Version 2.1 Quick Start Guide for VMware and Windows 7 Rev. 1.1 Published: JULY-2011 1999-2011 Propalms Ltd. All rights reserved. The information contained in this document represents the

More information

Acronis Backup & Recovery 10 Advanced Server Virtual Edition. Quick Start Guide

Acronis Backup & Recovery 10 Advanced Server Virtual Edition. Quick Start Guide Acronis Backup & Recovery 10 Advanced Server Virtual Edition Quick Start Guide Table of contents 1 Main components...3 2 License server...3 3 Supported operating systems...3 3.1 Agents... 3 3.2 License

More information

XenDesktop Implementation Guide

XenDesktop Implementation Guide Consulting Solutions WHITE PAPER Citrix XenDesktop XenDesktop Implementation Guide Pooled Desktops (Local and Remote) www.citrix.com Contents Contents... 2 Overview... 4 Initial Architecture... 5 Installation

More information

Core Protection for Virtual Machines 1

Core Protection for Virtual Machines 1 Core Protection for Virtual Machines 1 Comprehensive Threat Protection for Virtual Environments. Installation Guide e Endpoint Security Trend Micro Incorporated reserves the right to make changes to this

More information

WhatsUp Gold v16.1 Installation and Configuration Guide

WhatsUp Gold v16.1 Installation and Configuration Guide WhatsUp Gold v16.1 Installation and Configuration Guide Contents Installing and Configuring Ipswitch WhatsUp Gold v16.1 using WhatsUp Setup Installing WhatsUp Gold using WhatsUp Setup... 1 Security guidelines

More information

Quick Start Guide for Parallels Virtuozzo

Quick Start Guide for Parallels Virtuozzo PROPALMS VDI Version 2.1 Quick Start Guide for Parallels Virtuozzo Rev. 1.1 Published: JULY-2011 1999-2011 Propalms Ltd. All rights reserved. The information contained in this document represents the current

More information

Setting up VMware ESXi for 2X VirtualDesktopServer Manual

Setting up VMware ESXi for 2X VirtualDesktopServer Manual Setting up VMware ESXi for 2X VirtualDesktopServer Manual URL: www.2x.com E-mail: info@2x.com Information in this document is subject to change without notice. Companies, names, and data used in examples

More information

Setting up Citrix XenServer for 2X VirtualDesktopServer Manual

Setting up Citrix XenServer for 2X VirtualDesktopServer Manual Setting up Citrix XenServer for 2X VirtualDesktopServer Manual URL: www.2x.com E-mail: info@2x.com Information in this document is subject to change without notice. Companies, names, and data used in examples

More information

PowerPanel Business Edition Installation Guide

PowerPanel Business Edition Installation Guide PowerPanel Business Edition Installation Guide For Automatic Transfer Switch Rev. 5 2015/12/2 Table of Contents Introduction... 3 Hardware Installation... 3 Install PowerPanel Business Edition Software...

More information

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide N109548 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software Corporation makes

More information

WhatsUp Gold v16.2 Installation and Configuration Guide

WhatsUp Gold v16.2 Installation and Configuration Guide WhatsUp Gold v16.2 Installation and Configuration Guide Contents Installing and Configuring Ipswitch WhatsUp Gold v16.2 using WhatsUp Setup Installing WhatsUp Gold using WhatsUp Setup... 1 Security guidelines

More information

Verax Service Desk Installation Guide for UNIX and Windows

Verax Service Desk Installation Guide for UNIX and Windows Verax Service Desk Installation Guide for UNIX and Windows March 2015 Version 1.8.7 and higher Verax Service Desk Installation Guide 2 Contact Information: E-mail: sales@veraxsystems.com Internet: http://www.veraxsystems.com/

More information

Thinspace deskcloud. Quick Start Guide

Thinspace deskcloud. Quick Start Guide Thinspace deskcloud Quick Start Guide Version 1.2 Published: SEP-2014 Updated: 16-SEP-2014 2014 Thinspace Technology Ltd. All rights reserved. The information contained in this document represents the

More information

Installation Guide for Pulse on Windows Server 2012

Installation Guide for Pulse on Windows Server 2012 MadCap Software Installation Guide for Pulse on Windows Server 2012 Pulse Copyright 2014 MadCap Software. All rights reserved. Information in this document is subject to change without notice. The software

More information

Getting Started Guide

Getting Started Guide www.novell.com/documentation Getting Started Guide Novell PlateSpin Recon 3.7.4 December 12, 2012 Legal Notices Novell, Inc., makes no representations or warranties with respect to the contents or use

More information

Portions of this product were created using LEADTOOLS 1991-2009 LEAD Technologies, Inc. ALL RIGHTS RESERVED.

Portions of this product were created using LEADTOOLS 1991-2009 LEAD Technologies, Inc. ALL RIGHTS RESERVED. Installation Guide Lenel OnGuard 2009 Installation Guide, product version 6.3. This guide is item number DOC-110, revision 1.038, May 2009 Copyright 1992-2009 Lenel Systems International, Inc. Information

More information

Interworks. Interworks Cloud Platform Installation Guide

Interworks. Interworks Cloud Platform Installation Guide Interworks Interworks Cloud Platform Installation Guide Published: March, 2014 This document contains information proprietary to Interworks and its receipt or possession does not convey any rights to reproduce,

More information

XenClient Enterprise Synchronizer Installation Guide

XenClient Enterprise Synchronizer Installation Guide XenClient Enterprise Synchronizer Installation Guide Version 5.1.0 March 26, 2014 Table of Contents About this Guide...3 Hardware, Software and Browser Requirements...3 BIOS Settings...4 Adding Hyper-V

More information

Virtual Appliance for VMware Server. Getting Started Guide. Revision 2.0.2. Warning and Disclaimer

Virtual Appliance for VMware Server. Getting Started Guide. Revision 2.0.2. Warning and Disclaimer Virtual Appliance for VMware Server Getting Started Guide Revision 2.0.2 Warning and Disclaimer This document is designed to provide information about the configuration and installation of the CensorNet

More information

Installation Guide for Pulse on Windows Server 2008R2

Installation Guide for Pulse on Windows Server 2008R2 MadCap Software Installation Guide for Pulse on Windows Server 2008R2 Pulse Copyright 2014 MadCap Software. All rights reserved. Information in this document is subject to change without notice. The software

More information

Connection Broker Managing User Connections to Workstations, Blades, VDI, and More. Quick Start with Citrix XenDesktop, XenServer & XenApp

Connection Broker Managing User Connections to Workstations, Blades, VDI, and More. Quick Start with Citrix XenDesktop, XenServer & XenApp Connection Broker Managing User Connections to Workstations, Blades, VDI, and More Quick Start with Citrix XenDesktop, XenServer & XenApp Version 8.0 December 9, 2014 Contacting Leostream Leostream Corporation

More information

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide Symantec Backup Exec TM 11d for Windows Servers Quick Installation Guide September 2006 Symantec Legal Notice Copyright 2006 Symantec Corporation. All rights reserved. Symantec, Backup Exec, and the Symantec

More information

Pearl Echo Installation Checklist

Pearl Echo Installation Checklist Pearl Echo Installation Checklist Use this checklist to enter critical installation and setup information that will be required to install Pearl Echo in your network. For detailed deployment instructions

More information

Table of Contents. CHAPTER 1 About This Guide... 9. CHAPTER 2 Introduction... 11. CHAPTER 3 Database Backup and Restoration... 15

Table of Contents. CHAPTER 1 About This Guide... 9. CHAPTER 2 Introduction... 11. CHAPTER 3 Database Backup and Restoration... 15 Table of Contents CHAPTER 1 About This Guide......................... 9 The Installation Guides....................................... 10 CHAPTER 2 Introduction............................ 11 Required

More information

Bosch ReadykeyPRO Unlimited Installation Guide, product version 6.5. This guide is item number DOC-110-2-029, revision 2.029, May 2012.

Bosch ReadykeyPRO Unlimited Installation Guide, product version 6.5. This guide is item number DOC-110-2-029, revision 2.029, May 2012. Bosch ReadykeyPRO Unlimited Installation Guide, product version 6.5. This guide is item number DOC-110-2-029, revision 2.029, May 2012. Copyright 1995-2012 Lenel Systems International, Inc. Information

More information

Acronis Backup & Recovery 11.5 Quick Start Guide

Acronis Backup & Recovery 11.5 Quick Start Guide Acronis Backup & Recovery 11.5 Quick Start Guide Applies to the following editions: Advanced Server for Windows Virtual Edition Advanced Server SBS Edition Advanced Workstation Server for Linux Server

More information

VERITAS Backup Exec TM 10.0 for Windows Servers

VERITAS Backup Exec TM 10.0 for Windows Servers VERITAS Backup Exec TM 10.0 for Windows Servers Quick Installation Guide N134418 July 2004 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software

More information

Comprehensive Monitoring of VMware vsphere ESX & ESXi Environments

Comprehensive Monitoring of VMware vsphere ESX & ESXi Environments Comprehensive Monitoring of VMware vsphere ESX & ESXi Environments Table of Contents Overview...3 Monitoring VMware vsphere ESX & ESXi Virtual Environment...4 Monitoring using Hypervisor Integration...5

More information

Getting Started with ESXi Embedded

Getting Started with ESXi Embedded ESXi 4.1 Embedded vcenter Server 4.1 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition. To check for more recent

More information

Reconfiguring VMware vsphere Update Manager

Reconfiguring VMware vsphere Update Manager Reconfiguring VMware vsphere Update Manager vsphere Update Manager 6.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a

More information

Sharp Remote Device Manager (SRDM) Server Software Setup Guide

Sharp Remote Device Manager (SRDM) Server Software Setup Guide Sharp Remote Device Manager (SRDM) Server Software Setup Guide This Guide explains how to install the software which is required in order to use Sharp Remote Device Manager (SRDM). SRDM is a web-based

More information

VMware/Hyper-V Backup Plug-in User Guide

VMware/Hyper-V Backup Plug-in User Guide VMware/Hyper-V Backup Plug-in User Guide COPYRIGHT No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,

More information

Managing Multi-Hypervisor Environments with vcenter Server

Managing Multi-Hypervisor Environments with vcenter Server Managing Multi-Hypervisor Environments with vcenter Server vcenter Server 5.1 vcenter Multi-Hypervisor Manager 1.0 This document supports the version of each product listed and supports all subsequent

More information

Migrating MSDE to Microsoft SQL 2008 R2 Express

Migrating MSDE to Microsoft SQL 2008 R2 Express How To Updated: 11/11/2011 2011 Shelby Systems, Inc. All Rights Reserved Other brand and product names are trademarks or registered trademarks of the respective holders. If you are still on MSDE 2000,

More information

Team Foundation Server 2012 Installation Guide

Team Foundation Server 2012 Installation Guide Team Foundation Server 2012 Installation Guide Page 1 of 143 Team Foundation Server 2012 Installation Guide Benjamin Day benday@benday.com v1.0.0 November 15, 2012 Team Foundation Server 2012 Installation

More information

4.0 SP1 (4.0.1.0) November 2014 702P03296. Xerox FreeFlow Core Installation Guide: Windows Server 2008 R2

4.0 SP1 (4.0.1.0) November 2014 702P03296. Xerox FreeFlow Core Installation Guide: Windows Server 2008 R2 4.0 SP1 (4.0.1.0) November 2014 702P03296 Installation Guide: Windows Server 2008 R2 2014 Xerox Corporation. All rights reserved. Xerox, Xerox and Design, FreeFlow, and VIPP are trademarks of Xerox Corporation

More information

Citrix XenServer Workload Balancing 6.5.0 Quick Start. Published February 2015 1.0 Edition

Citrix XenServer Workload Balancing 6.5.0 Quick Start. Published February 2015 1.0 Edition Citrix XenServer Workload Balancing 6.5.0 Quick Start Published February 2015 1.0 Edition Citrix XenServer Workload Balancing 6.5.0 Quick Start Copyright 2015 Citrix Systems. Inc. All Rights Reserved.

More information

SA Citrix Virtual Desktop Infrastructure (VDI) Configuration Guide

SA Citrix Virtual Desktop Infrastructure (VDI) Configuration Guide SA Citrix Virtual Desktop Infrastructure (VDI) Configuration Guide Published July 2015 This document covers steps to configure Citrix VDI on Pulse Secure s SA Series SSL VPN platforms. It also covers brief

More information

Enterprise Manager. Version 6.2. Installation Guide

Enterprise Manager. Version 6.2. Installation Guide Enterprise Manager Version 6.2 Installation Guide Enterprise Manager 6.2 Installation Guide Document Number 680-028-014 Revision Date Description A August 2012 Initial release to support version 6.2.1

More information

Installing and Configuring vcenter Support Assistant

Installing and Configuring vcenter Support Assistant Installing and Configuring vcenter Support Assistant vcenter Support Assistant 5.5 This document supports the version of each product listed and supports all subsequent versions until the document is replaced

More information

Unitrends Virtual Backup Installation Guide Version 8.0

Unitrends Virtual Backup Installation Guide Version 8.0 Unitrends Virtual Backup Installation Guide Version 8.0 Release June 2014 7 Technology Circle, Suite 100 Columbia, SC 29203 Phone: 803.454.0300 Contents Chapter 1 Getting Started... 1 Version 8 Architecture...

More information

ADFS 2.0 Application Director Blueprint Deployment Guide

ADFS 2.0 Application Director Blueprint Deployment Guide Introduction: ADFS 2.0 Application Director Blueprint Deployment Guide Active Directory Federation Service (ADFS) is a software component from Microsoft that allows users to use single sign-on (SSO) to

More information

Novell PlateSpin Recon

Novell PlateSpin Recon Getting Started Guide AUTHORIZED DOCUMENTATION Novell PlateSpin Recon 3.6.1 March 15, 2010 www.novell.com PlateSpin Recon 3.6 Getting Started Guide Legal Notices Novell, Inc., makes no representations

More information

SA Citrix Virtual Desktop Infrastructure (VDI) Configuration Guide

SA Citrix Virtual Desktop Infrastructure (VDI) Configuration Guide SA Citrix Virtual Desktop Infrastructure (VDI) Configuration Guide This document covers steps to configure Citrix VDI on Juniper Network s SA Series SSL VPN platforms. It also covers brief overview of

More information

Veeam Backup Enterprise Manager. Version 7.0

Veeam Backup Enterprise Manager. Version 7.0 Veeam Backup Enterprise Manager Version 7.0 User Guide August, 2013 2013 Veeam Software. All rights reserved. All trademarks are the property of their respective owners. No part of this publication may

More information

Portions of this product were created using LEADTOOLS 1991-2010 LEAD Technologies, Inc. ALL RIGHTS RESERVED.

Portions of this product were created using LEADTOOLS 1991-2010 LEAD Technologies, Inc. ALL RIGHTS RESERVED. Installation Guide Lenel OnGuard 2010 Installation Guide, product version 6.4. This guide is item number DOC-110, revision 1.045, May 2010 Copyright 1995-2010 Lenel Systems International, Inc. Information

More information

Setting Up a Unisphere Management Station for the VNX Series P/N 300-011-796 Revision A01 January 5, 2010

Setting Up a Unisphere Management Station for the VNX Series P/N 300-011-796 Revision A01 January 5, 2010 Setting Up a Unisphere Management Station for the VNX Series P/N 300-011-796 Revision A01 January 5, 2010 This document describes the different types of Unisphere management stations and tells how to install

More information

WhatsUp Gold v16.3 Installation and Configuration Guide

WhatsUp Gold v16.3 Installation and Configuration Guide WhatsUp Gold v16.3 Installation and Configuration Guide Contents Installing and Configuring WhatsUp Gold using WhatsUp Setup Installation Overview... 1 Overview... 1 Security considerations... 2 Standard

More information

System Administration Training Guide. S100 Installation and Site Management

System Administration Training Guide. S100 Installation and Site Management System Administration Training Guide S100 Installation and Site Management Table of contents System Requirements for Acumatica ERP 4.2... 5 Learning Objects:... 5 Web Browser... 5 Server Software... 5

More information

Acronis SharePoint Explorer. User Guide

Acronis SharePoint Explorer. User Guide Acronis SharePoint Explorer User Guide Table of contents 1 Introducing Acronis SharePoint Explorer... 3 1.1 Supported Microsoft SharePoint versions... 3 1.2 Supported backup locations... 3 1.3 Licensing...

More information

SHAREPOINT 2013 IN INFRASTRUCTURE AS A SERVICE

SHAREPOINT 2013 IN INFRASTRUCTURE AS A SERVICE SHAREPOINT 2013 IN INFRASTRUCTURE AS A SERVICE Contents Introduction... 3 Step 1 Create Azure Components... 5 Step 1.1 Virtual Network... 5 Step 1.1.1 Virtual Network Details... 6 Step 1.1.2 DNS Servers

More information

Symantec Backup Exec 12.5 for Windows Servers. Quick Installation Guide

Symantec Backup Exec 12.5 for Windows Servers. Quick Installation Guide Symantec Backup Exec 12.5 for Windows Servers Quick Installation Guide 13897290 Installing Backup Exec This document includes the following topics: System requirements Before you install About the Backup

More information

Installing and Configuring WhatsUp Gold

Installing and Configuring WhatsUp Gold Installing and Configuring WhatsUp Gold This guide provides information about installing and configuring WhatsUp Gold v14.2, including instructions on how to run the WhatsUp web interface through an Internet

More information

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide Copyright and Trademark Statements 2014 ViewSonic Computer Corp. All rights reserved. This document contains proprietary information that

More information

Team Foundation Server 2013 Installation Guide

Team Foundation Server 2013 Installation Guide Team Foundation Server 2013 Installation Guide Page 1 of 164 Team Foundation Server 2013 Installation Guide Benjamin Day benday@benday.com v1.1.0 May 28, 2014 Team Foundation Server 2013 Installation Guide

More information

Networking Best Practices Guide. Version 6.5

Networking Best Practices Guide. Version 6.5 Networking Best Practices Guide Version 6.5 Summer 2010 Copyright: 2010, CCH, a Wolters Kluwer business. All rights reserved. Material in this publication may not be reproduced or transmitted in any form

More information

Index C, D. Background Intelligent Transfer Service (BITS), 174, 191

Index C, D. Background Intelligent Transfer Service (BITS), 174, 191 Index A Active Directory Restore Mode (DSRM), 12 Application profile, 293 Availability sets configure possible and preferred owners, 282 283 creation, 279 281 guest cluster, 279 physical cluster, 279 virtual

More information

VMware vcenter Configuration Manager Administration Guide vcenter Configuration Manager 5.5

VMware vcenter Configuration Manager Administration Guide vcenter Configuration Manager 5.5 VMware vcenter Configuration Manager Administration Guide vcenter Configuration Manager 5.5 This document supports the version of each product listed and supports all subsequent versions until the document

More information

Trial environment setup. Exchange Server Archiver - 3.0

Trial environment setup. Exchange Server Archiver - 3.0 Trial environment setup Exchange Server Archiver - 3.0 Introduction This document describes how you can set up a trial environment for using Exchange Server Archiver with Exchange Server 2007. You do not

More information

Novell ZENworks Asset Management 7.5

Novell ZENworks Asset Management 7.5 Novell ZENworks Asset Management 7.5 w w w. n o v e l l. c o m October 2006 INSTALLATION GUIDE Table Of Contents 1. Installation Overview... 1 If you are upgrading... 1 Installation Choices... 1 ZENworks

More information

InventoryControl for use with QuoteWerks Quick Start Guide

InventoryControl for use with QuoteWerks Quick Start Guide InventoryControl for use with QuoteWerks Quick Start Guide Copyright 2013 Wasp Barcode Technologies 1400 10 th St. Plano, TX 75074 All Rights Reserved STATEMENTS IN THIS DOCUMENT REGARDING THIRD PARTY

More information

NetIQ Sentinel 7.0.1 Quick Start Guide

NetIQ Sentinel 7.0.1 Quick Start Guide NetIQ Sentinel 7.0.1 Quick Start Guide April 2012 Getting Started Use the following information to get Sentinel installed and running quickly. Meeting System Requirements on page 1 Installing Sentinel

More information

How To Upgrade A Websense Log Server On A Windows 7.6 On A Powerbook (Windows) On A Thumbdrive Or Ipad (Windows 7.5) On An Ubuntu 7.3.2 (Windows 8) Or Windows

How To Upgrade A Websense Log Server On A Windows 7.6 On A Powerbook (Windows) On A Thumbdrive Or Ipad (Windows 7.5) On An Ubuntu 7.3.2 (Windows 8) Or Windows Websense v7.6 Install or Upgrade Checklist Greetings from Websense Technical Support. Most Websense upgrades complete successfully, and from my years of troubleshooting, I have learned a number of steps

More information

Virtual Managment Appliance Setup Guide

Virtual Managment Appliance Setup Guide Virtual Managment Appliance Setup Guide 2 Sophos Installing a Virtual Appliance Installing a Virtual Appliance As an alternative to the hardware-based version of the Sophos Web Appliance, you can deploy

More information

Virtual Web Appliance Setup Guide

Virtual Web Appliance Setup Guide Virtual Web Appliance Setup Guide 2 Sophos Installing a Virtual Appliance Installing a Virtual Appliance This guide describes the procedures for installing a Virtual Web Appliance. If you are installing

More information

Setting up Hyper-V for 2X VirtualDesktopServer Manual

Setting up Hyper-V for 2X VirtualDesktopServer Manual Setting up Hyper-V for 2X VirtualDesktopServer Manual URL: www.2x.com E-mail: info@2x.com Information in this document is subject to change without notice. Companies, names, and data used in examples

More information

Installing and Configuring vcenter Multi-Hypervisor Manager

Installing and Configuring vcenter Multi-Hypervisor Manager Installing and Configuring vcenter Multi-Hypervisor Manager vcenter Server 5.1 vcenter Multi-Hypervisor Manager 1.1 This document supports the version of each product listed and supports all subsequent

More information

HP Device Manager 4.6

HP Device Manager 4.6 Technical white paper HP Device Manager 4.6 Installation and Update Guide Table of contents Overview... 3 HPDM Server preparation... 3 FTP server configuration... 3 Windows Firewall settings... 3 Firewall

More information

Installation Instruction STATISTICA Enterprise Small Business

Installation Instruction STATISTICA Enterprise Small Business Installation Instruction STATISTICA Enterprise Small Business Notes: ❶ The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b) workstation installations

More information

SharePoint Server for Business Intelligence

SharePoint Server for Business Intelligence SharePoint Server for Business Intelligence SharePoint Business Intelligence Content Team Summary: Step-by-step, learn how to install and configure SharePoint Server 2010 and SQL Server 2008 to create

More information

Desktop Surveillance Help

Desktop Surveillance Help Desktop Surveillance Help Table of Contents About... 9 What s New... 10 System Requirements... 11 Updating from Desktop Surveillance 2.6 to Desktop Surveillance 3.2... 13 Program Structure... 14 Getting

More information

VMTurbo Operations Manager 4.5 Installing and Updating Operations Manager

VMTurbo Operations Manager 4.5 Installing and Updating Operations Manager VMTurbo Operations Manager 4.5 Installing and Updating Operations Manager VMTurbo, Inc. One Burlington Woods Drive Burlington, MA 01803 USA Phone: (781) 373---3540 www.vmturbo.com Table of Contents Introduction

More information

AIMS Installation and Licensing Guide

AIMS Installation and Licensing Guide AIMS Installation and Licensing Guide Version 9 2603 Camino Ramon Suite 110 San Ramon, CA 94583 Toll Free: 800-609-8610 Direct: 925-217-5170 FAX: 925-217-0853 Email: support@avatier.com Limited Warranty

More information

WhatsUp Gold v16.2 Database Migration and Management Guide

WhatsUp Gold v16.2 Database Migration and Management Guide WhatsUp Gold v16.2 Database Migration and Management Guide Contents CHAPTER 1 How to use this guide CHAPTER 2 Migrating the WhatsUp Gold Microsoft SQL Server 2008 R2 Express Edition database to Microsoft

More information

STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER

STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER Notes: STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER 1. These instructions focus on installation on Windows Terminal Server (WTS), but are applicable

More information

STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS

STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS Notes 1. The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b)

More information

Backup Exec 15. Quick Installation Guide

Backup Exec 15. Quick Installation Guide Backup Exec 15 Quick Installation Guide 21344987 Documentation version: 15 PN: 21344987 Legal Notice Copyright 2015 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, the Checkmark

More information

How To Create An Easybelle History Database On A Microsoft Powerbook 2.5.2 (Windows)

How To Create An Easybelle History Database On A Microsoft Powerbook 2.5.2 (Windows) Introduction EASYLABEL 6 has several new features for saving the history of label formats. This history can include information about when label formats were edited and printed. In order to save this history,

More information

Migrating TimeForce To A New Server

Migrating TimeForce To A New Server Rev. 4/28/14 Migrating TimeForce To A New Server Table of Contents 1. Installation Prerequisites... 2 Required... 2 Recommended... 3 2. Update to a Migration Compatible Version... 3 Determine the Database

More information

User Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream

User Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner

More information

CONFIGURING MICROSOFT SQL SERVER REPORTING SERVICES

CONFIGURING MICROSOFT SQL SERVER REPORTING SERVICES CONFIGURING MICROSOFT SQL SERVER REPORTING SERVICES TECHNICAL ARTICLE November/2011. Legal Notice The information in this publication is furnished for information use only, and does not constitute a commitment

More information

Installing Windows Server Update Services (WSUS) on Windows Server 2012 R2 Essentials

Installing Windows Server Update Services (WSUS) on Windows Server 2012 R2 Essentials Installing Windows Server Update Services (WSUS) on Windows Server 2012 R2 Essentials With Windows Server 2012 R2 Essentials in your business, it is important to centrally manage your workstations to ensure

More information

WhatsUp Gold v16.1 Database Migration and Management Guide Learn how to migrate a WhatsUp Gold database from Microsoft SQL Server 2008 R2 Express

WhatsUp Gold v16.1 Database Migration and Management Guide Learn how to migrate a WhatsUp Gold database from Microsoft SQL Server 2008 R2 Express WhatsUp Gold v16.1 Database Migration and Management Guide Learn how to migrate a WhatsUp Gold database from Microsoft SQL Server 2008 R2 Express Edition to Microsoft SQL Server 2005, 2008, or 2008 R2

More information

Automating client deployment

Automating client deployment Automating client deployment 1 Copyright Datacastle Corporation 2014. All rights reserved. Datacastle is a registered trademark of Datacastle Corporation. Microsoft Windows is either a registered trademark

More information

Synchronizer Installation

Synchronizer Installation Synchronizer Installation Synchronizer Installation Synchronizer Installation This document provides instructions for installing Synchronizer. Synchronizer performs all the administrative tasks for XenClient

More information

PHD Virtual Backup for Hyper-V

PHD Virtual Backup for Hyper-V PHD Virtual Backup for Hyper-V version 7.0 Document Release Date: December 18, 2013 www.phdvirtual.com Legal Notices PHD Virtual Backup for Hyper-V version 7.0 Copyright 2005-2013 PHD Virtual Technologies,

More information

DameWare Server. Administrator Guide

DameWare Server. Administrator Guide DameWare Server Administrator Guide About DameWare Contact Information Team Contact Information Sales 1.866.270.1449 General Support Technical Support Customer Service User Forums http://www.dameware.com/customers.aspx

More information

StarWind iscsi SAN: Global Deduplication with Veeam Backup&Replication

StarWind iscsi SAN: Global Deduplication with Veeam Backup&Replication StarWind iscsi SAN: Global Deduplication with Veeam Backup&Replication May 2012 TRADEMARKS StarWind, StarWind Software, and the StarWind and StarWind Software logos are trademarks of StarWind Software

More information

Version 3.8. Installation Guide

Version 3.8. Installation Guide Version 3.8 Installation Guide Copyright 2007 Jetro Platforms, Ltd. All rights reserved. This document is being furnished by Jetro Platforms for information purposes only to licensed users of the Jetro

More information

Installing SQL Express. For CribMaster 9.2 and Later

Installing SQL Express. For CribMaster 9.2 and Later Installing SQL Express For CribMaster 9.2 and Later CRIBMASTER USER GUIDE Installing SQL Express Document ID: CM9-031-03012012 Copyright CribMaster. 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,

More information

2XApplication Server XG v10.6

2XApplication Server XG v10.6 2XApplication Server XG v10.6 Introduction 1 URL: www.2x.com E-mail: info@2x.com Information in this document is subject to change without notice. Companies, names, and data used in examples herein are

More information