0 DMX Switch (stand alone mode) DAI Touch Dimmer Switch 78.9 70. 8.. Comply to standard protocol DMX(990) and in compliance with DMX products from other international incorporations. DMX address is manual addressable and shown in numuerical digital, great for ED projects, automatical addressable by controller. DMX master device is to control power on/off to cater for unwanted dimming lighting system. AC and DC items available for AC and DC system respectively. Comply to DAI standard protocol IEC 8-0,IEC 8-07 and in compliance with DAI products from other international incorporation. Touch interface operation design, easy to use. With bus detective function, one channel can install multiple dimming controllers. o external power supply which is provided by. Consumption current is ma. Enable to select different single light address, group address for controlling by encoding switch. Up to single light addresses or group addresses for switch and dimming control. Standard dimension design in 8*8mm, easy to install in the wall. DMX D+ D- D+ D- 70 DMX Switch 00-0VAC 00-0VAC Single color ED light 00-0VAC D+ D- D+ D- 70 DMX Switch 00-0VAC 00-0VAC Single color ED light 00-0VAC D D C D D 0 8 9 (x) 7 -VDC 0V-0VAC DAI / DAI software via computer 8 9 (x0) 7 D+ D- D+ D- 70 DMX Switch 00-0VAC 00-0VAC Single color ED light 00-0VAC SR-0B RGB or single color ED strip Part o. Input Voltage Output current Output Power DIMESIOS SR-70B 00-0VAC A 00W Hv-Halogen amps, ED amps Electronic ballst x78x8 Hv-Halogen SR-70B -VDC CH,A/CH 80-0W amps, ED x78x8 amps Part o. Operation Voltage Output DIMESIOS SR-00T 8x8x SR-00TG 8x8x SR-00TS 8x8x 89 90 Van Horn ed Viscontistraat Tel: + 70 info@led-strip.nl ed-strip.nl SE Almere Fax: + 9 www.led-strip.nl
D D C D D C DAI Touch Dimmer Switch DAI Touch Dimmer Switch Comply to DAI standard protocol IEC 8-0,IEC 8-07 and in compliance with DAI products from other international incorporation. Touch interface operation design, easy to use. With bus detective function, one channel can install multiple dimmer switchs. External power supply. Enable to select different single light zone by encoding switch.up to light zones for switch and dimming control.each zone can be DAI addresses or groups. Can save or scenes. Suitable for single color and CCT color ED. Comply to DAI standard protocol IEC 8-0,IEC 8-07 and in compliance with DAI products from other international incorporation. Touch interface operation design, easy to use. With bus detective function, one channel can install multiple dimmer switchs. External power supply. Enable to select different single light zone by encoding switch.up to light zones for switch and dimming control.each zone can be DAI addresses or groups. Can save or scenes. Suitable for RGB and RGBW ED. Built-in 0 color sequences -VDC 0V-0VAC DAI / DAI software via computer DAI / DAI software via computer -VDC 0V-0VAC SR-0B + - 0 8 9 (x) 7 SR-0B 0 8 9 (x0) 7 SR-0B + - 0 8 9 (x) 7 RGB or single color ED strip 0 8 9 (x0) 7 SR-0B RGB or single color ED strip Part o. Operation Voltage Output DIMESIOS SR-00TS-DIM -VDC 8x8x Part o. Operation Voltage Output DIMESIOS SR-00TS-DIM-US -VDC 0x7x SR-00TR-RGBW -VDC 8x8x SR-00TS-CCT -VDC 8x8x SR-00TS-RGB -VDC 0x7x SR-00TS-CCT-US -VDC 0x7x SR-00TP-RGBW -VDC 8x8x 9 9 Van Horn ed Viscontistraat Tel: + 70 info@led-strip.nl ed-strip.nl SE Almere Fax: + 9 www.led-strip.nl
DAI Module for Momentary Switch DAI Dimmer( DAI address) Comply to DAI standard protocol IEC 8-0,IEC 8-07 and in compliance with DAI products from other international incorporation. With bus detective function, one channel can install multiple dimming controllers. o external power supply which is provided by. Consumption current is ma. Enable to select different single light address, group address for controlling by encoding switch. Up to single light addresses or group addresses for switch and dimming control. Controlled by external switch, convenient and flexible, with small size, it can be easily placed into 8 X 8 mm box. In accordance with DAI standard protocol IEC 8-0 IEC 8-07, and it's compatible with other DAI products from international corporations. DAI address is manual addressable and shown in numuerical digital and great for ED project, automatical addressable from controller. One DAI address, CH work synchronously. 0%-00% dimming range via logarithmic characteristic, perfect for human s vision. To work with ED lights to establish DAI lighting system. To work with power repeater to expand output unlimitedly For DAI Dimmable led Drivers and dali master -VDC 0V-0VAC D D K D D C K K K 8 9 0 7 (x) 0 8 9 (x0) 7 x(~9) Starting umber (Setting the starting DAI Address(SR-00C), the starting Group umber,(sr-00gc), the starting Scene umber(sr-00sc)) 0x(~9) DAI For four Buttons Dimmer Part o. Input Voltage Output current Output Power DIMESIOS Part o. Operation Voltage Output DIMESIOS SR-0B -VDC CH,A/CH 0-70W Constant Voltage x78x8 SR-00C SR-00GC SR-00SC xx xx xx SR-0BEA -VDC CH,8A/CH 8-W Constant Voltage 8x8x8 SR-0S -VDC CH,8A 9-88W Constant Voltage x8x0 SR-B -VDC CH,0.A/CH.8-0.W Constant Current x78x8 SR-B -VDC CH,0.7A/CH.-00.8W Constant Current x78x8 9 9 Van Horn ed Viscontistraat Tel: + 70 info@led-strip.nl ed-strip.nl SE Almere Fax: + 9 www.led-strip.nl
DAI Dimmer( DAI addresses) DAI Dimmer(Push Dim) -VDC In accordance with DAI standard protocol and it's compatible with, and it's compatible with other DAI products from international corporations. DAI address is manual addressable and shown in numerical digital and great for ED project, automatically addressable from controller. DAI address, CH work separately. 0%-00% dimming range via logarithmic characteristic, perfect for human s vision. To work with ED lights to establish DAI lighting system. To work with power repeater to expand output unlimitedly. 0V-0VAC In accordance with DAI standard protocol IEC 8-0 IEC 8-07, and it's compatible with other DAI products from international corporations. DAI address is manual addressable and shown in numerical digital and great for ED project, automatically addressable from controller. DAI address, CH work synchronously 0%-00% dimming range via logarithmic characteristic, perfect for human s vision. DAI push dimmer not only gets standard DAI dimming function (DAI mode), but it s also compatible with PUSH DIMMER function (-button mode). -button mode can work independently without DAI signal. To work with ED lights to establish DAI lighting system. To work with power repeater to expand output unlimitedly. -VDC DAI SR-0B 0V-0VAC DAI SR-0B SR-0B 0-0VAC -VDC 0V-0VAC Push dimmer SR-0B Part o. Input Voltage Output current Output Power DIMESIOS SR-0B -VDC CH,A/CH 0-70W Constant Voltage x78x8 Part o. Input Voltage Output current Output Power DIMESIOS SR-0BEA -VDC CH,8A/CH 8-W Constant Voltage 8x8x8 SR-0S -VDC CH,8A 9-88W Constant Voltage x8x0 SR-B -VDC CH,0.A/CH.8-0.W Constant Current x78x8 SR-7B -VDC CH,0.7A/CH.-00.8W Constant Current x78x8 SR-0B -VDC CH,A/CH 0-70W Constant Voltage x78x8 SR-0BEA -VDC CH,8A/CH 8-W Constant Voltage 8x8x8 SR-B -VDC CH,0.A/CH.8-0.W Constant Current x78x8 SR-8B -VDC CH,0.7A/CH.-00.8W Constant Current x78x8 9 9 Van Horn ed Viscontistraat Tel: + 70 info@led-strip.nl ed-strip.nl SE Almere Fax: + 9 www.led-strip.nl
Modbus Slave DAI Switch Standard Modbus control interface,can set the modbus address freely Show the address via digital numueric display Four channels Max A or 8A per channel Set scenes Set operation modes-single color, Dual color, RGB,RGBW Preset 0 color running modes Choose linear dimming and logarithmic dimming Constant voltage and constant current types optional for different led lights To work with power repeater to expand output unlimitedly DAI Comply to standard protocol IEC 8-0,IEC 8-07 and in compliance with DAI products from other international incorporations. DAI address is manual addressable and shown in numuerical digital, great for ED projects, automatical addressable by controller. DAI master device is to control power on/off to cater for unwanted dimming lighting system. AC items available for AC system respectively. SR-70B DAI Switch 00-0VAC 00-0VAC 00-0VAC Single color ED light SR-70B DAI Switch 00-0VAC 00-0VAC 00-0VAC Single color ED light SR-70B DAI Switch 00-0VAC 00-0VAC 00-0VAC Single color ED light Part o. Input Voltage Output current Output Power DIMESIOS SR-00FA -VDC CH,A/CH 0-70W Constant Voltage x78x8 SR-00EA -VDC CH,8A/CH 8-W Constant Voltage 8x8x8 SR-00FA -VDC CH,0.A/CH.8-0.W Constant Current x78x8 SR-00FA7 -VDC CH,0.7A/CH.-00.8W Constant Current x78x8 Part o. Input Voltage Output current Output Power DIMESIOS SR-70B 00-0VAC A 00W Hv-Halogen amps, ED amps Electronic ballst x78x8 Regular SR-70B -VDC CH,A/CH 80-0W ED (0.0-0.W) x78x8 97 98 Van Horn ed Viscontistraat Tel: + 70 info@led-strip.nl ed-strip.nl SE Almere Fax: + 9 www.led-strip.nl
DAI Output current 0mA Over current protection High reliability and stability 99 Part o. IPUT SR-00P 00-0VAC SR-00PEA 00-0VAC Van Horn ed ed-strip.nl Output Current OAD TYPE DIMESIOS 70mA 0mA / x00x 70mA 0mA / 8x8x8 Input Current Viscontistraat SE Almere Tel: + 70 Fax: + 9 info@led-strip.nl www.led-strip.nl 88