COLLEZIONI
MORE ABOUT US 100%TAPS ENGINEERED AND PRODUCED IN ITALY by RUBINETTERIA LA TORRE SpA The undersigning Massimo Latorraca, president and legal representative of the Co LA TORRE located in INVORIO (NO) ITALIA, Altovergante, 33 DECLARES UNDER HIS OWN RESPONSIBILITY THE FOLLOWING: the Co La torre is a real production Co, a manufacturing reality with its own internal engineering and research capacity, production and testing processes, distribution and after sale service all certified since 2001 by the prestigious German institute TUV Co Lt is a true representative of Made in Italy proud of exporting worldwide the products of the prestigious Italian industry and with a personal production history starting back in 1921 the Co production process is always ethically correct and respectful of the environment, so much so that in 2001 the Company was the first to apply for and obtain the special environmental quality certification (ISO 14001:2004) that is a warranty that really all La Torre production phases, including the chrome plating done in its plant, have no negative effect to the environment. raw material used by the Co are all made and composed according to the most demanding international rules aimed at protecting the consumer s health. La torre products meet the requirements of the American rule NSF 61 regarding the lead released from the fitting that has to be completely absent! CERTIFICAZIONI PRIMA RUBINETTERIA ITALIANA CON LE DUE CERTIFICAZIONI DI QUALITÀ: FIRST ITALIAN FAUCETS MANIFACTURER WITH BOTH THE IMPORTANT INTERNATIONAL QUALITY CERTIFICATIONS: ISO 14001:2004 SISTEMA DI GESTIONE AMBIENTALE ENVIROMENTAL MANAGEMENT SYSTEMS ISO 9001:2008 VISION SISTEMA DI GESTIONE PER LA QUALITÀ QUALITY MANAGEMENT SYSTEM RUBINETTERIA SANITARIA SANITARY FITTINGS SETTEMBRE 2001 SEPTEMBER 2001 INTERNATIONAL APPROVALS LT s products respond to high standards of innovation, quality and design by chosing the original products of the Co the user is safe from any of the counterfeiting frequent episodes that so much damage the image of made in Italy and cheat the consumers. LA TORRE brand is registered worldwide and most of the LT models have international patent. DIRETTIVA DEL CONSIGLIO 98/83/CE (SULLA QUALITÀ DELLE ACQUE DESTINATE AL CONSUMO UMANO) COUNCIL DIRECTIVE 98/83/EC (ON THE QUALITY OF WATER INTENDED FOR HUMAN CONSUMPTION)
We have a long tradition in export, we have been selling our products in many Countries of the world and have acquired a certain knowledge of the rules, requirements and peculiarities of many different world areas. All this combined with our technical know-how and our flexibility enable us to have the right product and solutions for many and different Markets.
INFORMAZIONI TECNICHE INFORMAZIONI TECNICHE THE CONTAMINATION BY LEAD Brass currently used to produce taps and valves, contains a certain % of lead which contaminates drinking water, as clearly demonstrated by several studies (see diagram below). Lead accumulates in the human body and its toxicity becomes evident also at very low concentration in the blood: 80-100 μg/l. It is particularly dangerous for children whose psycophysical growth can be affected. For these reasons the standards in various Countries have been modified or are under revision,to set the maximum level of lead content in drinking water to the values recommended by WHO (Word Health Organizzation) 10 μg/l. THE PROCESS RUVECO UNITED STATES PATENT N 6.284.053 The RUVECO Process inhibits lead release from brass to water in a simple, effective and economic way. The products treated by this process fulfill entirely the requirements of the new standards concerning the contamination of lead in drinking water. With the RUVECO Process the resulting lead release of treated products is always lower than 10 µg/l respecting suggested standards by WHO (World Health Organizzation) (fig2). (fig 1) (fig 2) GENERAL FEATURES OF THE LA TORRE PRODUCTS CHROME PLATING ACCORDING TO THE NORM EN 248 CHROME THICKNESS 0,4 MICRO NICKEL THICKNESS 12 MICRO INSIDE CARTRIDGE WITH CERAMIC DISCS COMPLYING WITH FLOW AND RESISTANCE REQUIREMENTS OF EN 817 ñ ASME A112.18.1M HONEYCOMB AERATOR WITH ANTI-LIME SYSTEM, LOW NOISE, HIGH PRESSURE RESISTANCE. STAINLESS STEEL FLEXIBLE HOSE CONNECTIONS SUITABLE FOR THE CONNECTION BETWEEN MAIN PLANT AND MIXERS. COMPLYING WITH REQUIREMENTS OF DVGW - DVGW/W270 - WRAS - WRC - NSF61 - WATERMARK - CSTBAT - KIWA BRASS FLEXIBLE HOSES FOR SHOWERS AND KITCHEN ONES WITH INSIDE NON-TOXIC RUBBER HOSE. DOUBLE GRIP 0.26 THICK ACCORDING TO THE NORMS NF - ACS - NSF61 HAND SHOWERS FOR KITCHEN MIXERS SUITABLE FOR COMPACT CONTACT WITH DRINKING WATER, NO TOXIC ACCORDING TO NF - NSF O. RINGS AND WASHERS IN SPECIAL MATERIAL SUITABLE FOR DRINKING WATER. DVGW - DVGW/W270 - NSF61 - WRC - WRAS BRASS POP UP WASTE ACCORDING TO NF - NSF61. TRADITIONAL MECHANISMS OR WITH CERAMIC DISCS, LONG LIFE AND RESISTANT TO HIGH TEMPERATURE. COMPLYING WITH THE NORMS NF - WRC - ASME - CSA - KIWA - DIN
INFORMAZIONI TECNICHE LA TORRE MIXERS ARE BRASS MADE COMPLYING WITH FOLLOWING REGULATIONS: UE BRASS CW 617N BRASS CB 755S BRASS CW 508L USA BRASS CW 510L BRASS CB 753S BRASS CW 508L AUS/NZ BRASS CW 625N BRASS CB 752S BRASS CW 508L TAP S BODIES CASTED ONLY IN ITALY OR PRESS-FORGED IN ONE PIECE, WITHOUT ANY KIND OF WELDING ON BONDED JOINT: TOTAL SECURITY OF WET SEAL AND LIFE. INFORMAZIONI TECNICHE TECHNICAL INFORMATIONS ECO CARTRIDGE RESPONDING TO THE POLICY OF THE CO. TOWARDS PRESERVATION OF THE ENVIRONMENT AS OFFICIALLY RECOGNISED BY THE CERTIFICATION ISO 14001 ENVIRONMENTAL MANAGEMENT SYSTEMS. THE LINES LISTED AN THIS PAGE ARE EQUIPPED WITH A DOUBLE STEP ECO CARTRIGE (NOT FOR MIXERS WITH SIDE LEVES). ON THESE LINES NO ECO CARTRIGE ONLY ON REQUEST: JAVA - KONVEX - TOWER TECH - METRÒ - MAXIMA MAXIMUM WATER FLOW RATE ECONOMICAL WATER FLOW RATE CLOSED ECO AERATORS FOR ALL MIXER OUR FAUCETS AND TAPS CAN BE EQUIPPED, ON REQUEST, WITH SPECIFIC AERATORS TO MEET DIFFERENT REQUIREMENTS OR RULES ABOUT WATER CONSUPTION AND FLOW. Endurance test: EN 817 70.000 cycles ASME A112.18.1 500.000 cycles Flow rate: 3 bar / 45 psi, test faucet, EN 817 34,6 l/min / 9,1 gpm without resistance 22,3 l/min /5,9 gpm with resistance C
INDICE_FINITURE LAGHI available in chrome_white chrome TAYA available in chrome WODA available in chrome WINGS available in chrome ITALIA 150 available in chrome STUDIO available in chrome_gold_white color_ black color_brushed nickel OVALINE available in chrome_gold JAVA available in chrome DADO available in chrome_white color_ black color INDICE_FINITURE PAG PAG 12-15 KONVEX available in chrome 62-67 16-19 TOWER TECH 68-73 available in chrome_brushed nickel 20-23 GIRO 74-77 available in chrome_white color_ 24-27 black color METRÒ 78-81 28-33 available in chrome MAXIMA 82-85 34-37 available in chrome NEWPRO 86-89 available in chrome 38-45 TERMOSTATICI 90-93 available in chrome 46-55 SISTEMI DOCCIA 94-98 available in chrome 56-61
Laghi Laghi
444001 44501 44200 44050R 44030 44035 COL 15 44011 44020 44050 44144 SOFF LAGHI QUADRO COMPL
taya taya
840001 40501 40200 40050R 40030 40036 COL 19 40011 40020 40050 40144 SOFF WF TAYA
woda wingsw wings w woda
2237001 37501 37200 37050R 37030 37036 COL 23 37011 37020 37050 37144 SOFF EXTRA 300
wings w wings w
6AA001 AA501 AA200 AA050 AA050R CD WINGS 050 27 AA011 AA020 AA045 AA030 AA244
italia wingsw 150 italia wings w 150
035001 35666 35601 35011 35020 35045 31 35501 35999 35200 35030 35050 35050R
3235151 N 35144/20 35025 COL 35244 35244SLIM
studio studio
631001 31045 31501 31800 31020 31030 37 31200 31011 31811 31050 31050R 31244
ovaline ovaline
026001 26501 26601 26200 26300 26283 41 26601L 26011 26611 26803 26813 26803 CROSS
26813 CROSS 26603 CROSS 26613 CROSS 26848 26848 CROSS 26743 CROSS 43 26020 26045 26045 WS 26050 26050R 26030
4426151 N 26144 26244
java java
828001 ST 28001 JA 28501 ST EX 28611 28801 JD ST 28801 FLAG ST 49 28501 JA EX 28601 28011 28801 JD JA 28801 FLAG JA 28200 ST
50 51 28200 JA 28280 ST JD 28280 JA JD 28811 FLAG 28020 28044 PAV 28280 ST FLAG 28280 JA FLAG 28811 JD 28019 28020S
28847 JD 28847 FLAG 28040R 28151 N 28350 28244SLIM 53 28030 28050 28050R 19244 19144/20 28144/20 JA
54SPAV 19000 SPAV 19028 28936 COL
dado dado
820001 20501 20601 20200 20019 20030 59 20651 20011 20611 20050 20050R 20050RL
6020151 N 20141 20062
konvex konvex
417001 17501 17601 17200 17024 17347 17030 SP028 EX 65 17011 17611 17350 17020 17035 17050/170 17050R
6617050RL 17062 17144/20 17244/SH 17244/LO 17144 R 17144 RL
wingsw tower tech tower tech
012001 12501 12501JOY 12581 12611 14001 CROSS 12020 12044 71 12601 14200 CROSS 12200 12011 12024 12045 EX 12347 EX 12847 EX CROSS
212743 CROSS 12030 12050 12044 12050R 12151 N SP028 EX PAV 12029 73 12144/10 12144/20 12244/SH 12144 R 12350
giro giro
621001 21501 EX 21200 21011 21062 21141 21151 N 21144 77 21020 21030 21050 21050/R
metrò metrò
8032001 32200 32601 32011 32050RL 32030 21144 12244/LO 81 32020 32045 32050 32050/R
maxima maxima
847001 7011 7020 7045 7060 144 144R 85 7050 7050R 7050RL 7030
newpro newpro
842001 42050 42002 42005 42601 42050R SALI METRÒ COMPL 89 42011 42019 42020S 42030 BRASO NEWPRO
termostatici termostatici
2LAGHI TOWERTECH LAGHI WINGS OVALINE LAGHI JAVA_DADO KONVEX 93 JAVA_DADO JAVA_DADO KONVEX KONVEX METRÒ_NEW PRO
sistemi doccia sistemi doccia
635037 CO.SE 40036 COL KI 20 35036 COL 20036 COL 20025 COL 17025 COL 17036 COL CD UNI 292 97
98SOFF W FALL SOFF EXTRA RECT SALI LAGHI COMPL SALI WINGS COMPL SOFF KI CIV 20 SOFF TONDO COMPL I PRODOTTI DELLE COLLEZIONI LA TORRE SONO FRUTTO DI COSTANTE E CONTINUA RICERCA E DI SVILUPPO TECNICO ED ESTETICO. É QUINDI POSSIBILE CHE GLI ARTICOLI RAFFIGURATI NEL CATALOGO NON RAPPRESENTINO SEMPRE LA PIÙ AGGIORNATA VERSIONE DEL PRODOTTO REALE. TALI VARIAZIONI AVVENGONO NEL CORSO DELLA NORMALE ATTIVITÀ AZIENDALE E SEMPRE A SCOPO MIGLIORATIVO. LE AMBIENTAZIONI DELLE FOTO SONO PURAMENTE SCENOGRAFICHE E CREATIVE E NON VALGONO COME INDICAZIONI DI INSTALLAZIONE. THE PRODUCTS OF THE LA TORRE COLLECTIONS ARE SUBJECT TO CONSTANT ATTENTION AND AESTHETIC AND TECHNICAL AMELIORATIONS TAKE PLACE WHEN NEEDED. IT MAY THEREFORE OCCUR THAT THE REAL ITEMS SHOW SOME DIFFERENCES FROM THE CORRESPONDING PICTURE OF THE CATALOGUE. SHOOTING SETS AND POSITION OF THE ITEMS IN THE PICTURES OF THE CATALOGUE ARE IN NO WAY INTENDED AS A SUGGESTION OR GUIDE FOT HE INSTALLATION, BUT ONLY AS A CREATIVE IMAGE.
www.rubinetteria-latorre.it 28045 Invorio - Fraz. Talonno (NO) Italy via Altovergante 33 Tel. +39 0322 255391 Fax +39 0322 255442 e-mail info@latorre-spa.it www.rubinetteria-latorre.it P. IVA 00625010038