model Bottle Filler FEATUES & BENEFITS UNIVESAL MOUNTING This unit is perfect as a stand-alone bottle filling station, or easily located over virtually any wall mounted drinking fountain or water cooler with its quick mount wall frame. The unit connects to the fountains water line, and naturally drains into the waste so there is no need for new water or drain lines. ONSTUTION Medium grey ABS plastic construction aesthetically blends in with stainless steel drinking fountain basins, and easily resists stains and fingerprints. USEABLE FOOTPINT With its narrow width dimensions of only 8-1/4" (21 cm), this bottle filler can be mounted above almost any drinking fountain with ease. This compact size does not take away from its large bottle filling area accommodating bottle sizes up to 10" (25.4 cm) high. EVESIBLE DAIN TAY Patent pending flexible design allows for outward drain to be reversed inward allowing drain water to be connected to waste inside of wall. PUSH BUTTON With its patented stainless steel, push-button activated valve assembly which allows for front access stream adjustment as well as cartridge and strainer access, this bottle filler offers 100% lead free waterways. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar). OPTIONS emote hiller: Model H8, 8 gph (30.3 L) remote water chiller provides instantaneous cooling to meet a continuous demand for chilled water. To see all options for this model, visit www.hawsco.com SPEIFIATIONS Model wall mounted bottle filler shall include 100% lead-free waterways, push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, patent pending reversible waste attachment for over-fountain or in-wall waste drain, medium grey ABS plastic construction, and easy to use mounting frame with easy to follow mounting instructions. APPLIATIONS This type of wall mounted bottle filler may be placed in settings such as: schools and other locations in and around office buildings with existing fountain installations where the temperature remains above freezing.model meets all current Federal egulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI 61, Section 9, NSF/ANSI 372, alifornia Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to alifornia Health and Safety ode 116875 (AB 1953-2006). 1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 09 June, 2015 DISLAIME: ontinued product improvements make specifications subject to change without notice. heck www.hawsco.com for the latest product information and updates.
THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS NOTES: 1. HOLD OUGH-IN DIMENSIONS ±1/4" (6.4mm). 2. WHEN INSTALLING THIS UNIT, LOAL, STATE, O FEDEAL ODES SHOULD BE ADHEED TO. FO HEIGHTS OTHE THAN SHOWN, DIMENSIONS MAKED (*) MUST BE ADJUSTED AODINGLY. INSTALL A TAP IN THE WASTE LINE AND A SEWDIVE STOP IN THE SUPPLY LINE IF EQUIED. 3 EFE TO 5874SS OPEATION & MAINTENANE MANUAL FO PUSH BUTTON AND VALVE & MAINTENANE INSTUTIONS. 1 of 4 4 BOTTLE FILLE IS SHOWN INSTALLED AT ADA MAXIMUM OBSTUTED FOWAD EAH HEIGHT. FO ADA OBSTUTED SIDE EAH OMPLIANE, BOTTLE FILLE MUST BE LOWEED 2". ADA OMPLIANE DEPENDS ON OVEALL SIZE OF WATE OOLE O DINKING FOUNTAIN (SEE SHEETS 3 & 4). 4" [102mm] 8 5 16 " [211mm] 1/4" QUIK ONNET WATE INLET 16 1 4 " [413mm] 10" [254mm] (ALOVE) 3 8 3 8 " [213mm] 4855 EN: 4937 JL DAWN: DATE: HK'D.: DAWING NO. EV APPOVED: DATE: BOTTLE FILLE, EW ETOFIT SALE: N/A DAWING TYPE: SIZE: A SHEET 1 OF 4 2014 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation.
THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS 2 1 4 " [57mm] (DAIN) 3 13 16 " [97mm] (IN-WALL DEPTH) DAIN BASIN (EVESED) 1-1/4" SLIP JOINT WASTE FITTING DINKING FOUNTAIN DAIN EXTENDE MOUNTING FAME MOUNTING FAME ELIEF UT DAIN BASIN DINKING FOUNTAIN BAK PANEL 2 of 4 TV SILIONE GOOVE, BUT NOT IN THE GOOVE. HEK THE TV BEAD FO THIN SETIONS, GAPS, O AEAS WHEE THE BEAD DOES NOT TOUH THE PLASTI - FILL THESE IN WITH TV. 4855 EN: 4937 JL DAWN: DATE: HK'D.: DAWING NO. EV APPOVED: DATE: BOTTLE FILLE, EW ETOFIT SALE: N/A DAWING TYPE: SIZE: A SHEET 2 OF 4 2014 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation.
THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS ANHO SPAE MOUNTING FAME #10 x 2" SEW Ø1/4" HOLE IN DYWALL WALL FAE IF A ELIEF MUST BE UT HIGHE THAN THE MOUNTING TAB, UT HEE TO DETAH THE SIDE OF THE MOUNTING FAME FOM THE MOUNTING TAB. EA DAIN UTOUT (OPTIONAL) - UT TO SIDES OF MTG FAME OPENING & TO BOTTOM EDGE OF MTG FAME 2 1 2 " [64mm] UTOUT HEIGHT 6 7 8 " [175mm] L ENTELINE MAKED WITH GOOVES 9" [229mm] 37" 4 [940mm]* (HEIGHT TO LOWE MOUNTING HOLES) 3 of 4 FLOO LINE MOUNTING TAB 4855 EN: 4937 JL DAWN: DATE: HK'D.: DAWING NO. EV APPOVED: DATE: BOTTLE FILLE, EW ETOFIT SALE: N/A DAWING TYPE: SIZE: A SHEET 3 OF 4 2014 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation.
THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS 1/4" O.D. SUPPLY TUBING 3" LEFT OF BOTTLE FILLE ENTELINE; 11/16" OUT FOM WALL ELETI WATE OOLE 48" 4 [1219mm]* 1/4" O.D. SUPPLY TUBING 3" LEFT OF BOTTLE FILLE ENTELINE; 11/16" OUT FOM WALL DINKING FOUNTAIN 4 48" [1219mm]* 4 of 4 FLOO LINE FLOO LINE 4855 EN: 4937 JL DAWN: DATE: HK'D.: DAWING NO. EV APPOVED: DATE: BOTTLE FILLE, EW ETOFIT SALE: N/A DAWING TYPE: SIZE: A SHEET 4 OF 4 2014 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation.