FROST PROOF Outdoor Water Taps
|
|
|
- Herbert Johnson
- 9 years ago
- Views:
Transcription
1 FROSTLINE A/S is a Danish company that designs and manufactures outdoor water taps in glass peened stainless steel. The FROSTLINE product range includes water taps for installation in private gardens, public parks and facilities as well as construction sites and washing-down areas. The water taps are robust with a classical design. The products are unique because they ensure frost-proof water supply and fresh, cool water all year round. FROST PROOF Outdoor Water Taps The core of the product range is the patented self-emptying 3-way sliding valve. When the water tap is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The water tap and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap is at frost-free depth. FROSTLINE A/S Gotlandsvej 6 DK-8700 Horsens Tel.: Fax: [email protected]
2 CLASSIC WATER TAP
3 CLASSIC 23 G WATER TAP ½ frost-proof water tap, especially designed for private gardens. Made from glass peened stainless steel. The beautiful and classic water taps from FROSTLINE are a stylish addition to any garden, patio, courtyard and anywhere else with a need for fresh outdoor water. The water tap is supplied complete with well. 210 The water tap is fitted with a self-emptying 3-way sliding valve ensuring that the tap remains frost-proof, even at hard freezing temperatures. The seals can be replaced without digging up the well. Pull the water tap up of the well, dismantle the valve and change the seals (o-rings). Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface PRODUCT Designation: Tapping: Connection: ½ frost-proof water tap for outdoor installation ½ nipple pipe thread ½ nipple pipe thread INSTALLATION DIMENSIONS Tapping height: 430 mm Tapping depth: 225 mm Pipe stand height: 795 mm Height of handle: 715 mm Height of spout: 630 mm 900 PRODUCT DIMENSIONS Overall height: 1,695 mm Overall width: 200 mm Well: D200 x 900 mm SHIPPING Dimensions, H-W-D: Weight: VALVE Capacity: O-rings: VA approval No.: ETA VA 1.51/ ,740 x 200 x 380 mm 10.5 kg complete with well OPERATION OF THE VALVE The water tap is provided with a 3-way selfemptying sliding valve. 0-6 = + - 0,1When the water Målforhold Tegnet Dato Ændret Mål uden tolerance Materiale FROSTLINE self-emptying sliding valve 1-10 TC/RT l/min. at 2-4 bar tap is not in use, the = valve = ,2 0,3 and riser pipe Navn 1 x D14 x 1,5 70sh, 2 x D10x2,5 70sh are emptied of water that might otherwise FROSTLINE Gårdvandpost freeze. The water tap and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap does not freeze. Overfladebehandling Område F MODELS F Classic Water Tap OPTIONAL F Classic Well Ring D60 F Quick coupling - stainless steel F Extension hose 300mm w/fittings FROSTLINE A/S T: F: [email protected]
4 DUO H 30 WATER TAP
5 DUO H 30 WATER TAP ½ frost-proof water tap made from glass peened stainless steel. This water tap is particularly suitable for public parks and facilities, golf courses, camping sites and other areas with a need for reliable water supply all year round. The water tap is supplied complete with well. The water tap is fitted with a self-emptying 3-way sliding valve, ensuring that the tap remains frost-proof, even at hard-freezing temperatures. The seals can be replaced without digging up the well. Unscrew the spindle housing from the top of the pipe stand, then pull up the spindle and replace the O-rings. Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface. PRODUCT Designation: Tapping: Connection: ½ frost-proof water tap for outdoor installation ½ nipple pipe thread ¾ nipple pipe thread INSTALLATION DIMENSIONS Tapping height: 760 mm Tapping depth: 155 mm Pipe stand height: 900 mm Height of handle: 795 mm Height of spout: 900 mm PRODUCT DIMENSIONS Overall height: 1,820 mm Overall width: 166 mm Well: D160 x 900 mm SHIPPING Dimensions, H-W-D: Weight: 1,840 x 200 x 300 mm 10.5 kg complete with well VA approval No.: ETA VA 1.51/16921 VALVE FROSTLINE self-emptying sliding valve Capacity: l/min. at 2-4 bar O-rings: 8 x 3 mm NBR shore 70 MODELS F Duo H 30 Water Tap F Duo H 30 w/automatic closing OPERATION OF THE VALVE The water tap is provided with a 3-way self-emptying sliding valve. When the water tap is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The water tap and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap does not freeze. F Duo H 9 Water Tap F Duo H 9 w/automatic closing ACCESSORIES F LUNA Rinse Bowl D250 F Duo Well Ring D60 F Blocking tube H F Quick coupling - stainless steel F Extension hose 300mm w/fittings Duo w/rinse Bowl and Well Ring FROSTLINE A/S T: F: [email protected]
6 DUO L 30 WATER TAP
7 DUO L 30 WATER TAP ½ frost-proof water tap made from glass peened stainless steel. This water tap is particularly suitable for public parks, cemeteries and other urban areas with a need for reliable water supply all year round. The water tap is supplied complete with well. The water tap is fi tted with a self-emptying 3-way sliding valve, ensuring that the tap remains frost-proof, even at hard freezing temperatures. The seals can be replaced without digging up the well. Unscrew the spindle housing from the top of the pipe stand, then pull up the spindle and replace the O-rings. Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface. PRODUCT Designation: Tapping: Connection: ½ frost-proof water tap for outdoor installation ½ nipple pipe thread ¾ nipple pipe thread INSTALLATION DIMENSIONS Tapping height: 520 mm Tapping depth: 155 mm Pipe stand height: 795 mm Height of handle: 715 mm Height of spout: 655 mm PRODUCT DIMENSIONS Overall height: 1,695 mm Overall width: 166 mm Well: D160 x 900 mm SHIPPING Dimensions, H-W-D: Weight: 1,840 x 200 x 300mm 10 kg complete with well VALVE FROSTLINE self-emptying sliding valve Capacity: l/min. at 2-4 bar O-rings: 8 x 3 mm NBR shore 70 MODELS F Duo L 30 Water Tap F Duo L 30 w/automatic closing F Duo L 9 Water Tap F Duo L 9 w/automatic closing VA approval No.: ETA VA 1.51/16921 OPERATION OF THE VALVE The water tap is provided with a 3-way self-emptying sliding valve. When the water tap is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The water tap and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap does not freeze. OPTIONAL F Duo Well Ring D60 F Blocking tube L F Quick coupling - stainless steel F Extension hose 300mm w/fi ttings Duo Well Ring D FROSTLINE A/S T.: F: [email protected]
8 DUO H 30 RINSE TAP
9 DUO H 30 RINSE TAP ½ frost-proof water tap made from glass peened stainless steel. This water tap is particularly suitable for camping sites, schools, cemeteries and private gardens with a need for reliable water supply all year round. The water tap is supplied complete with well. The water tap is fitted with a self-emptying 3-way sliding valve, ensuring that the tap remains frost-proof, even at hard freezing temperatures. The seals can be replaced without digging up the well. Unscrew the spindle housing from the top of the pipe stand, then pull up the spindle and replace the O-rings. Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface. PRODUCT Designation: Tapping: Connection: ½ frost-proof water tap for outdoor installation ½ nipple pipe thread ¾ nipple pipe thread INSTALLATION DIMENSIONS F171 F172 Tapping height: 1,070 mm 920 mm Tapping depth: 235 mm 235 mm Pipe stand height: 1,250 mm 1,100 mm Height of handle: 1,025 mm 875 mm Height of spout: 1,250 mm 1,100 mm PRODUCT DIMENSIONS F171 F172 Overall height: 2,150 mm 2,000 mm Overall width: 166 mm 166 mm Well: D160x900 mm D160x900 mm VALVE FROSTLINE self-emptying sliding valve Capacity: l/min. at 2-4 bar O-rings: 8 x 3 mm NBR shore 70 VA approval No.: ETA VA 1.51/16921 MODELS F Duo L 30 Rinse Tap 1070 F Duo L 30 Rinse Tap 920 OPTIONAL F LUNA Rinse Bowl D380 F Blocking tube H F Quick coupling stainless steel OPERATION OF THE VALVE The water tap is provided with a 3-way self-emptying sliding valve. When the water tap is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The water tap and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap does not freeze. LUNA Rinse Bowl D FROSTLINE A/S T: F: [email protected]
10 DUO OUTDOOR SHOWER
11 DUO OUTDOOR SHOWER Duo Outdoor Shower is made from glass peened stainless steel. The shower is particularly suited for private gardens as well as camping sites, outdoor swimming pools, sea fronts, pool areas etc. The shower is supplied complete with well. The shower is fitted with a self-emptying 3-way sliding valve, ensuring that the tap remains frost-proof, even at hard freezing temperatures. The seals can be replaced without digging up the well. Unscrew the spindle housing from the top of the pipe stand, then pull up the spindle and replace the O-rings. Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface. PRODUCT Designation: Tapping: Connection: INSTALLATION DIMENSIONS Shower height: 1,950 mm Shower depth: 220 mm Pipe stand height: 2, mm Height of handle: 795 mm ½ frost-proof water tap for outdoor installation ½ nipple pipe thread ¾ nipple pipe thread PRODUCT DIMENSIONS Overall height incl. well: 3,065 mm Overall width: 166 mm Well: D160 x 900 mm SHIPPING Dimensions, H-W-D: 3120 x 200 x 400 mm Weight: 13 kg complete with well VALVE FROSTLINE self-emptying sliding valve Capacity: l/min. at 2-4 bar O-rings: 8 x 3 mm NBR shore 70 VA approval No.:ETA VA 1.51/16921 MODELS F Duo Outdoor Shower F Duo Outdoor Shower w/automatic closing OPTIONAL F Duo Well Ring D60 OPERATION OF THE VALVE The shower is provided with a 3-way self-emptying sliding valve. When the shower is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The shower and thus the valve and riser pipe are frost-proof as long as the water supply line for it does not freeze. Duo Outdoor Shower FROSTLINE A/S T: F: [email protected]
12 WALL WATER TAP
13 WALL OUTDOOR WALL-MOUNTED WATER TAP Exclusive outdoor designer tap made from glass peened stainless steel, for wall mounting. This water tap is specially designed for the quality-conscious house and cottage owner, but is also suitable for schools and public buildings where design, functionality and robustness must become one. Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface. PRODUCT Designation: Tapping: Connection pressure Outdoor water tap for wall mounting ½ nipple pipe thread 2-6 bar INSTALLATION DIMENSIONS Distance to wall: mm Wall clamping: mm (shorten to length) mm (shorten to length) Connection: D15mm copper pipes and ½ pipe thread PRODUCT DIMENSIONS Overall length: 675 mm / 375 mm Overall width: 30 x 70 mm SHIPPING Dimensions, H-W-D: Weight: VALVE O-rings: 750 x 100 x 50 mm 1,6 kg Ceramic valve with build-in check valve 8 x 3mm NBR 70 sh Wall and Ellipse Hose Bracket F740: mm F760: mm MODELS F F Wall water tap mm Wall water tap mm VA approval No.: ETA VA 1.51/17408 OPTIONAL F F F F F F F Quick coupling - stainless steel Ellipse Hose Bracket, wall-mounted ½ 300 mm extension hose w/fi ttings ½ 3,000 mm garden hose with fi ttings ½ 6,000 mm garden hose with fi ttings ½ 9,000 mm garden hose with fi ttings ½ 25,000 mm garden hose with fi ttings The extension hose makes it easier to fi ll watering cans or buckets FROSTLINE A/S T: F: [email protected]
14 WALL WATER TAP
15 WALL OUTDOOR WALL-MOUNTED WATER TAP Exclusive outdoor designer tap for wall mounting. Copper covered stainless steel. This water tap is specially designed for the quality-conscious house and cottage owner that appiciates products where design, functionality and robustness become one. PRODUCT Designation: Tapping: Connection pressure Outdoor water tap for wall mounting ½ nipple pipe thread 2-6 bar INSTALLATION DIMENSIONS Distance to wall: mm Wall clamping: mm (shorten to length) Connection: D15mm copper pipes and ½ pipe thread PRODUCT DIMENSIONS Overall length: 675 mm / 375 mm Overall width: 30 x 70 mm SHIPPING Dimensions, H-W-D: Weight: 750 x 100 x 50 mm/ 1,6 kg VALVE O-rings: Ceramic valve with build-in check valve 8 x 3 NBR 70 sh Wall og Ellipse Hose Bracket mm MODELS F Wall Water Tap Copper VA. approval No.: ETA - VA 1.51/17408 OPTIONAL F Ellipse Hose Bracket Copper F Quick Coupling Copper FROSTLINE A/S T: F: [email protected]
16 DRINKING FOUNTAIN OUTDOOR
17 DRINKING FOUNTAIN - OUTDOOR Outdoor drinking fountain made from glass peened stainless steel. The drinking fountain is intended for kindergartens, school yards, parks and at sport facilities where there is a need for fresh, cool water all year round. The fountain is robust and reliable and therefore suitable for installation in the public area. The design is without any sharp edges and protrusions where children might hurt themselves. There are no operating costs in connection with the use of the fountain. The fountain is provided with a self-closing handle that turns off the water when released. The fountain is fi tted with a self-emptying 3-way sliding valve, and when connected to the main water supply, the fountain will provide cool water all year round. A fascine of 500 mm is recommended. Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface. PRODUCT Designation: Tapping: Connection: Drinking fountain, Low 600 mm and High 805 mm, supplied complete with installation and drain well D 8 mm jet nozzle ½ nipple pipe thread INSTALLATION DIMENSIONS F202 F200 Tapping height: 600 mm 805 mm Pipe stand height: 600 mm 805 mm Height of handle: 350 mm 550 mm PRODUCT DIMENSIONS Fountain height: 600 mm 805 mm Well: D 315 x 900 mm Overall width: Cover: D 315 mm Drinking bowl: D 250 mm Spindle stand: D 33 mm SHIPPING Dimensions, H-W: 1,500mm x 400mm 1,705mm x 400mm Weight: 30 kg 33 kg VA approval No.: ETA VA 1.51/16921 VALVE FROSTLINE self-emptying sliding valve O-rings: 8 x 3mm NBR shore 70 Capacity: 9 l/min. at 2-4 bar MODELS F Drinking Fountain Outdoor 805mm F Drinking Fountain Outdoor 600mm OPERATION OF THE VALVE The fountain is provided with a 3-way selfemptying sliding valve. When the fountain is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The fountain and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap does not freeze FROSTLINE A/S T: F [email protected]
18 DRINKING FOUNTAIN INDOOR
19 DRINKING FOUNTAIN - INDOOR Indoor drinking fountain made from glass peened stainless steel. The drinking fountain is intended for kindergartens, school and shopping malls where there is a need for fresh, cool water all year round. The fountain is robust and reliable and therefore suitable for installation in the public area. The design is without any sharp edges and protrusions. There are no operating costs in connection with the use of the fountain. The fountain is provided with a self-closing handle that turns off the water when released. The fountain is fitted with a self-emptying 3-way sliding valve, and when connected to the main water supply, the fountain will provide cool water all year round. Drainage underneath the fountain has to be established. It is advisable to fit a strainer in the water supply line. PRODUCT Designation: Tapping: Connection: INSTALLATION DIMENSIONS Tapping height: Pipe stand height: Height of handle: Drinking fountain, supplied complete with installation well D 8 mm jet nozzle ½ nipple pipe thread 805 mm 805 mm 550 mm PRODUCT DIMENSIONS Fountain height: Well: Overall width: 805 mm D 315 x 900 mm Cover: D 315 mm Drinking bowl: D 250 mm Spindle stand: D 33 mm SHIPPING Dimensions, H-W: Weight: 1,200mm x 400mm 30 kg Product no: F210 VVS no: VALVE FROSTLINE self-emptying sliding valve O-rings: 8 x 3mm NBR shore 70 Capacity: 9 l/min. at 2-4 bar ETA-VA approval No: ETA - VA 1.51/16921 OPERATION OF THE VALVE The fountain is provided with a 3-way selfemptying sliding valve. When the fountain tap is not in use, the valve and riser pipe are emptied of water. The fountain will allways supply fresh and coll water direct from teh water supply FROSTLINE A/S Tel.: Fax: [email protected]
20 DUO L 50 PROFESSIONAL
21 R 65 DUO L 50 PROFESSIONAL ¾ frost-proof water tap made from glass peened stainless steel. This water tap is particularly suitable for construction sites, industrial plants, washing-down areas, farms or other places with a need for reliable water supply all year round. The water tap is supplied complete with well. The water tap is fitted with a self-emptying 3-way sliding valve, ensuring that the tap remains frost-proof, even at hard freezing temperatures. The seals can be replaced without digging up the well. Unscrew the spindle housing from the top of the pipe stand, then pull up the spindle and replace the O-rings. Is the product to be placed in an area with a hign environmental impact, including sea fog, it is recommented to choose a special design i.e. an electro polished surface /4"RG PRODUCT Designation: Tapping: Connection: ¾ frost-proof water tap for outdoor installation ¾ nipple pipe thread ¾ nipple pipe thread INSTALLATION DIMENSIONS Tapping height: 495 mm Tapping depth: 155 mm Pipe stand height: 795 mm Height of handle: 715 mm Height of spout: 655 mm PRODUCT DIMENSIONS Overall height: 1,695 mm Overall width: 260 mm Well: D160 x 900 mm SHIPPING Dimensions, H-W-D: 1,840 x 200 x 300 mm Weight: 10 kg complete with well VALVE FROSTLINE self-emptying sliding valve Capacity: l/min. at 2-4 bar O-rings: 8 x 3 mm NBR shore Skum iso 300 m.m. Prop for kuldebro 695 3/4" tilgang MODEL F Duo L 50 Professional OPTIONAL F Blocking tube L - stainless steel VA approval No.: ETA VA 1.51/16921 Målforhold Tegnet Dato Ændret Mål uden tolerance Materiale Overfladebehandling freeze. 0-6 The = + - 0,1water tap and thus the valve 1-10 TC/RT = + - 0,2 and riser = pipe + - 0,3 are frost-proof as long as the Navn Område FROSTLINE OPERATION OF THE VALVE The water tap is provided with a 3-way selfemptying sliding valve. When the water tap is not in use, the valve and riser pipe are emptied of water that might otherwise Bemærkning water supply line for the tap does not freeze. Teg Vandpost Type T/KB model 235 F/P FROSTLINE A/S T: F: [email protected]
22 WORKMAN
23 WORKMAN - TEMPORARYLY WATER SUPPLY FOR CONSTRUCTION SITES 1 water tap for use all year round, in heavy, compact design for construction sites. Frost proof and reliable. No electricity consumption. Produced in 1 stainless steel pipe. PRODUCT Designation: Tapping: Connection: 1 frost-proof professional water tap 3/4 muff pipe thread 1 nippel pipe thread INSTALLATION DIMENSIONS Tapping height: 720 mm when buried at 900 mm Pipe stand height: 844 mm Total height: 1745 mm SHIPPING Dimensions, H-W-D: Weight: VALVE Connection pressure: 1,840 x D70 mm 5.5 kg FROSTLINE self-emptying sliding valve 2-6 bar INSTALLATION Bury the water tap at 900-1,200 mm depth, and connect to the water supply using 1 fittings. Place pebbles and gravel (not sand) in a diameter at cm and at a depth of approx. 50 cm around the water tap drain. SERVICE The seals can be replaced without digging up the water tap. Unscrew the spindle housing from the top of the pipe stand, then pull up the full length of the spindle. Replace the seals at the valve plunger. OPERATION OF THE VALVE The water tap is provided with a 3-way selfemptying sliding valve. When the water tap is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The water tap and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap does not freeze. VVS No.: Product No.: F801 Frost-proofing of temporary water supply for construction sites. The water tap does not have ETA-VA approval. The water in the tap is not potable FROSTLINE A/S T: F: [email protected]
24 INDUSTRIAL WATER TAP
25 INDUSTRIAL WATER TAP 1 VA approved frost proof water tap in stainless steel with 3/4 tapping developed for water supply on farms, washing down areas, recycling depots, church yards etc. Delivered complete with well. The water tap is provided with a patented self-emptying 3-way sliding valve insuring that the tap remains frost proof even at hard freezing temperatures. PRODUCT Designation: Tapping: Connection: 1 frost proof industial water tap 3/4 socket pipe tread 1 nippel pipe thread INSTALLATION DIMENSIONS Tapping height: 720mm Pipe stand height 844mm Total height: 1746mm Well: D 160 x 900mm SHIPPING H x D: weight: VALVE Capacity: Connection pressure: 1840mm x D176mm 8,5kg FROSTLINE self-emptying sliding valve l/min. at 2-4 bar 2-6 bar INSTALLATION Bury the water tap at 900mm depth and connect to the water supply using 1 fittings. Place pebbles and gravel (not sand) in a diameter at 20-30cm and at a depth of approx. 50 cm around th water tap drain. SERVICE The seals can be replaced without digging up the water tap. Unscrew the spindle housing from the top of the pipe stand, then pull up the full length of the spindle. Replace the seals at the valve plunger. OPERATION OF THE VALVE The water tap is provided with a 3-way selfemptying sliding valve. When the water tap is not in use, the valve and riser pipe are emptied of water that might otherwise freeze. The water tap and thus the valve and riser pipe are frost-proof as long as the water supply line for the tap does not freeze. VVS no.: Product no: F802 VA-approval no: ETA-VA 1.51/ FROSTLINE A/S T: F [email protected]
swimming pool accessories
76 swimming pool accessories 77 Dolphin pool cleaners Dolphin Plus Battery Cordless pool cleaner with lithium ion battery Cleans the pool in 1.5 hours Special programs Clogged filter bag indicator Incl.
SUPERYACHT SPARES. Nozzles and portable monitors. www.superyachtspares.com / [email protected] / +31 183 639193
Nozzles and portable monitors Rosenbauer - Nozzles and portable monitors EN Maximum extinguishing effect. Minimal water consumption. The Rosenbauer nozzle enables the manual adjustment of the water flow
LK Wallbox UNI Push. Assembly. Only intended for LK PE-X Universal Pipe X.
LK Wallbox UNI Push Only intended for LK PE-X Universal Pipe X. LK Wallbox UNI Push 16 Single Article no. 188 06 38 LK Wallbox UNI Push 20 Single Article no. 188 06 39 LK Distance template LK Wallbox UNI
50AI01oe 02/15. Labko GRP cesspools. Instructions for installation, operation and maintenance
02/15 Labko GRP cesspools Instructions for installation, operation and maintenance Reliable solutions Wastewater treatment systems Contents 1 LABKO CESSPOOLS... 3 1.1 GENERAL... 3 1.2 IMPORTANT TO KNOW
1. Geo Vertical 2. Geo Horizontal
1 2 1. Geo Vertical 2. Geo Horizontal 1 2 3 1. Geo Vertical 2. Geo Vertical with towel rail 3. Geo Vertical with cover plate Geo Vertical 47 Geo Vertical Dimensions Connections Range GEVW_Geo Vertical
Itho Products for Hot and Boiling water. product-
Itho Products for Hot and Boiling water product- 2 This booklet provides additional information on the range of hot and boiling water appliances by Itho. The data will allow you to determine which product
Fiberstars Mini Lighted Laminar Flow Fountains
Fiberstars Mini Lighted Laminar Flow Fountains SAVE THESE DIRECTIONS! These directions are provided to ensure the proper installation and operation of Fiberstars Mini Lighted Laminar Flow Fountain. The
When Safety Comes First. Emergency Safety Shower and Eye Wash Catalogue
When Safety Comes First Emergency Safety Shower and Eye Wash Catalogue No industry, irrespective of its size or its function, can afford to neglect the safety of its personnel and the general public. Advances
Fiberstars Lighted Laminar Flow Fountain Installation Manual
Fiberstars Lighted Laminar Flow Fountain Installation Manual 79-15037-00 REV Xx http://www.fiberstars.com Page 1 of 8 SAVE THESE DIRECTIONS! These directions are provided to ensure the proper installation
Select Radiators Installation Guide
Select Radiators Installation Guide Table of Contents Informational Symbols...3 Before You Begin...4 Select Rough-In... 5 Connection Installation...6 Optional Piping Arrangements...7 Conventional Wall
AIR DEHUMIDIFYING 2011. Condensation drying for industry and trade
AIR DEHUMIDIFYING 2011 Condensation drying for industry and trade Condensation drying for industry and trade 2011 DH 18 domestic dehumidifiers Development, production and sales: All from a single source
Vacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
INSTANTANEOUS GAS FIRED
INSTANTANEOUS GAS FIRED Celt Star C Britony II T Britony FlexiFlue Hot water on demand Instantaneous gas fired water heaters Instant hot water from the world leader Back in 1925 Chaffoteaux & Maury invented
Operators manual Basic water heater
Operators manual Basic water heater Isotemp Basic water heater has been designed and produced to ensure that your water heater will give long and trouble free operation for many years. It is important,
When Safety Comes First. Emergency Safety Shower and Eye Wash Catalogue
When Safety Comes First Emergency Safety Shower and Eye Wash Catalogue No industry, irrespective of its size or its function, can afford to neglect the safety of its personnel and the general public. Advances
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
Donut Robot Mark I Mark VI
The worldwide leader in donut production equipment +1.206.322.5474 [email protected] www.belshaw.com AUTOMATIC FRYERS Donut Robot Mark I Mark VI Donut Robot Series Automatic Fryers deposit, fry, turn, and
DIESEL-FUELED, BLOWN AIR, DUCTABLE HEATERS
DIESEL-FUELED, BLOWN AIR, DUCTABLE HEATERS Electronic thermostatically controlled Low power consumption Compact space saving size Short heat-up times Dehumidification of the cabin Quiet when running Combustion
Cost-effective solutions for all applications.
Professional Pressure Washers Hard Surface Cleaners NEW Cost-effective solutions for all applications. Pressure washer performance for hard-surfaces. Pressure washer performance made easy. Kärcher hard-surface
Isotemp Basic, Slim/B & Slim Square
Isotemp Basic, Slim/B & Slim Square Water heater Installation and operating instructions Indel Marine S.r.l. Zona Artigianale sn IT-61019 S. Agata Feltria (PU) Italy Tel. 39 0541 848 030 Fax 39 0541 848
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT MAXIMATOR GmbH 2 MAXIMATOR has an extensive know-how concerning concept, development, construction and manufacturing of test benches and
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
valid as of 1 April 2014 Intec injection hose system
FRANK Product List valid as of 1 April 2014 Intec injection hose system Intec injection hose systems Intec injection hose systems ensure secure, simple and rapid sealing of horizontal and vertical construction
EXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
Saferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
Workshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
Fixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
NESCAFÉ Solution 8/60 Beverage System. Operations Manual
NESCAFÉ Solution 8/60 Beverage System Operations Manual 1 INDEX & WARNINGS INDEX Warnings SECTION: 1 INDEX & WARNINGS SECTION: 2 BASIC PARTS OF THE MACHINE SECTION: 3 LOADING PRODUCTS SECTION: 4 DISPENSING
JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g. drinking and surface water monitoring,
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
Stainless steel process fittings
Page 1/6 Stainless steel process fittings Installation in pipe systems Installation in tanks and vessels Hygienic version FDA conformity of materials Probe length 120 mm 120 mm Availability of various
Chill 4 Hole Bath Shower Mixer
Chill 4 Hole Bath Shower Mixer Fitting Instructions & Contents List Please keep these instructions for future reference and request of replacement parts Contents Page 1. Introduction 02 2. Safety Note
How To Use A Corona Mdi 110
CORONA MDI 110 APPLICATION Domestic water meter FEATURES 4 Modular multi-jet domestic meter with inductive scanning (without magnetic influence) 4 System capability, with standard applicable pulse output
ROUGHNECK II Pumpless Drain
SERVICE BULLETIN SB4027 Rev. I 1/11 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent #
Version: 1.0 TWO HANDLES INWALL WATERFALL FAUCET INSTALL GUIDE
MODEL: S1248CW Version: 1.0 TWO HANDLES INWALL WATERFALL FAUCET INSTALL GUIDE Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
Original NiTO Couplings. NiTO Industrial Spray Guns. NiTO Leading supplier of high quality couplings for the professional market www.nito.
Original NiTO Couplings NiTO Industrial Spray Guns NiTO Leading supplier of high quality couplings for the professional market www.nito.com The complete Quick coupling programme from the leading manufacturer
This unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink.
1. Description This unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink. The unit will start automatically. Please pay particular
ELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
EWE Water Meter Systems
thoroughly tried and tested! EWE Water Meter Systems...more than just a water meter mount www.ewe-armaturen.de EWE Water Meter Systems EWE water meter systems are the result of our continuous development
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
VITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A
Technical Data Manual Model Nos. and pricing: see Price List Vacuum tube collector based on the heat pipe principle For the utilisation of solar energy VITOSOL r 200-T SP2A Product may not be exactly as
SunMaxx Solar Filling Station Operating Instructions
SunMaxx Solar Filling Operating Instructions Content 1. Declaration of conformity... 2 2. Introduction... 2 3. Transportation and unpacking... 4 4. Mounting and commissioning... 5 5. End of operation...
Goulds Water Technology
APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
112039.00 224500 EMERGENCY PLUMBING FIXTURES
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following emergency plumbing fixtures: 1. Emergency showers. 2. Eyewash equipment. 3. Eye/face wash equipment. 4. Hand-held drench hoses. 5. Combination
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control
Pre-installation Manual. CONCEPT Processor 305 DW / 405 DW / 505 DW 505 DW XP
Pre-installation Manual CONCEPT Processor 305 DW / 405 DW / 505 DW 505 DW XP Pre-installation Manual CONCEPT Processor 305 DW / 405 DW / 505 DW / 505 DW XP T11336 Edition AA, April 2013 This book has
ETL listed for installations within 5 ft. (1.5M) of outer edge of water www.srsmith.com 79-15152-00 Rev E2 9.14 Page 1 of 10
Color Light Streams Large Laminar Installation Manual (CLSLL) Input Power: Total Power: 12V AC 5W 4008814 ETL listed for installations within 5 ft. (1.5M) of outer edge of water 79-15152-00 Rev E2 9.14
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
Thermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
Assembly and instructions
Assembly and instructions Franke Minerva 3-in-1 Kettle Tap Retain for reference NB: For use only with Franke Heating Tank INTRODUCTION The Kettle Tap is suitable for dispensing boiling water (100 C) and
INSTALLATION INSTRUCTIONS MK-8704
INSTALLATION INSTRUCTIONS MK-8704 EXPOSED MACKINTOSH THERMOSTATIC MIXING VALVE WITH RISER KIT, HANDSET, LEVER DIVERTER, 8 ROSE AND ADJUSTABLE RISER PIPE BRACKET. Dimensions in Inches (& Millimetres) 1
WATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
TUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1
Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
ECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
Puddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
Maintenance and Operating Instructions SIS 120P/SISF
Maintenance and Operating Instructions IRRITROL Pop-up sprinkler with integrated valve SIS 120P/SISF Contents 1. General 2. Safety 3. Description 4. Assembly 5. Commissioning 6. Maintenance 7. Break-down
Guth Portable gitators R The long-term solution pplications Guth Portable gitators R are used for the mixing, stirring and the homogenization of water-like or medium viscosity products. They are most often
Urban CalfMom PAULA. Calf feeding? That s Mom s job! FEEDING TECHNOLOGY specialized in calves
Urban CalfMom PAULA Calf feeding? That s Mom s job! FEEDING TECHNOLOGY specialized in calves FEEDING TECHNOLOGY specialized in calves Stress-free calf feeding! The Urban CalfMom enables the fully automatic
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
Product catalogue, abrasive cutting
Product catalogue, abrasive cutting Cutting nozzle assemblies Abrasive jet cutting system Abrasive hopper Abrasive material www.hammelmann.com Contents (Navigation via Bookmarks) Cutting nozzle assemblies
FLUSHING CISTERNS. product catalogue
FLUSHING CISTERNS product catalogue 2 Beautiful power of water 5 CONCEALED SYSTEMS 23 FLUSHING PLATES 29 NO-CONTACT FLUSHING 35 EXPOSED FLUSHING CISTERNS 41 SPARE PARTS The line of concealed systems is
PRO-CLEAN. Technical Description. Specifications. Space-saving design with minimum heat loss (melamine resin insulation)
PRO-CLEAN Product description Specifications Technical Description Max. backup operating pressure Max. service water operating pressure 3 bar 6 bar Hot water connection " female thread* V4A (no..4) Cold
AL-System 6 AQUALOOP System 6. Installation and operating instructions WATER IS OUR ELEMENT. www.intewa.com
AL-System 6 AQUALOOP System 6 Installation and operating instructions WATER IS OUR ELEMENT www.intewa.com Table of contents 1. Introduction and general instructions... 2 2. Scope of delivery... 3 3. Technical
Solar Hot Water Heaters
Solar Hot Water Heaters Three High Vacuum Water inlet Stainless Steel screw Gel seal and insulation Water outlet Dust proof seals Non Pressure Models Details ASWH-1b ( Color Painted 304 ) ASWH-1c ( stainless
Spray Nozzles. Spray Control. Spray Fabrication. Spray Analysis. A Guide to Optimizing In-Tank Agitation and Mixing Using Eductors
s Control Analysis Fabrication A Guide to Optimizing In-Tank Agitation and Mixing Using Eductors Eductors Ensure Thorough Mixing to Improve Product Quality and Reduce Maintenance Time Tank mixing eductors
Installation and Commissioning Manual Solar Stations FlowCon Max Evolution II
Installation and Commissioning Manual Solar Stations FlowCon Max Evolution II 1 For your safety Table of Contents 1 For your safety... 3 1.1 About this manual... 3 1.2 Designated use... 3 1.3 Qualification
HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
Operation manual and Spare parts list 1400 - EL PUMP. November
Operation manual and Spare parts list 1400 - EL PUMP 10 GB November 1 KIMADAN A/S KIMADAN A/S 2 Operational manual and spare parts list 1400 El-pump 15, 20, 25 HP 5 30 kw 6 1. Description.. 3 2. Installation
HDA -----------------------------------------------------------
----------------------------------------------------------- Lightstrips ---------------------------------------------------------------------- Ceiling system for heating and cooling LIGHTSTRIPS LIGHTSTRIPS
G26 Corp. 9721-L11 Revised 07-2001 LENNOXOEMPARTS.COM. Service Literature G26 SERIES UNITS
Service Literature G26 SERIES UNITS G26 series units are high-efficiency upflow gas furnaces manufactured with DuralokPlust aluminized steel clamshell-type heat exchangers. G26 units are available in heating
Shower and Floor Gullies Channel Drain and Tile Drain SECTION
Shower and Floor Gullies Channel Drain and Tile Drain SECTION 2 Shower and Floor Gullies, Channel Drain and Tile Drain 29 General Information Shower and Floor Gullies McAlpine has responded to market conditions
THE BOILING WATER DISPENSER INSTALLATION & OPERATING INSTRUCTIONS
THE BOILING WATER DISPENSER INSTALLATION & OPERATING INSTRUCTIONS Applied Energy Products Limited, Morley Way, Peterborough, PE2 9JJ, UK Telephone: +44 (0) 844 372 7761 / Fax: +44 (0) 84 372 7762 Website:
INSTALLATION INSTRUCTIONS BL-8704
INSTALLATION INSTRUCTIONS BL-8704 EXPOSED BLACK LEVER THERMOSTATIC MIXING VALVE WITH RISER KIT, HANDSET, LEVER DIVERTER, 8 ROSE AND ADJUSTABLE RISER PIPE BRACKET. Dimensions in Inches (& Millimetres) 1
BROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas
BROEN UNIFLEX Fittings FOR BURNIN ASES BROEN UniFlex TM Fittings for burning gases BROEN UniFlex TM Fittings for burning gases LAB Table of Contents Content Page Table of Content 2 Product Overview 3 BROEN
Installation Operation Maintenance Troubleshooting Version 2.1, Apr/09 DAYTONA
Installation Operation Maintenance Troubleshooting Version 2.1, Apr/09 1607 DAYTONA Congratulations! All of us at Summit Dental Systems want you to know that your 1607 Daytona Cuspidor has been built with
Multiport Spill Containment with Defender Spill Containers
Multiport Spill Containment with Defender Spill Containers Retrofit Installation Guide Overview Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 USA Tel: +1 608 838 8786 800 225 9787 Fax: +1 608
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
PArt# spout Length Adjusts. 33308 8 7-1/2 to 8-1/2 33310 10 7-1/2 to 8-1/2 33312 12 7-1/2 to 8-1/2 33314 14 7-1/2 to 8-1/2. PArt# FIts Adjusts
The Best Plumbing Specialties. One Source. FAucet - commercial FAucet - WALL Mount - heavy duty - 8 centres Institutional Quality - Specification Grade Contemporary Design - Individually Pressure Tested
Consumer acces.- special equipment
Model: Special equipment Part List English Table of Contents Drain and tube cleaner 3 External injector 5 External injector old model 7 PATIO CLEANER up to 2007 9 PATIO CLEANER COMPACT 11 PATIO CLEANER
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
ElastoFlake & ElastoTec
ElastoFlake & ElastoTec Relining Group 02 Revolutionally injection casting ElastoFlake, a new material from the Relining Group, is a polymer plastic mass intended for injection casting, which was developed
Electronic Wallmount Faucet 1500T4 & 1501T4 Series
Electronic Wallmount Faucet 1500T4 & 1501T4 Series Specification: (example) Battery (4 C cell) or Hardwire (24 VAC) infrared electronic handwash system H 2OPTICS technology no external adjustments required
OWNER S MANUAL. Certified to NSF/ANSI 61. This product is covered by one or more of the following US patent US D692, 524 S
OWNER S MANUAL Certified to NSF/ANSI 61 This product is covered by one or more of the following US patent US D692, 524 S CONTENTS INTRODUCTION CUSTOMER SUPPORT IMPORTANT NOTES SPECIFICATIONS INSTALLATION
1000/14.02 KOBSERT. Thread inserts for metals
1000/14.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical
Cable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
VCE VET ENGINEERING STUDIES
Victorian Certificate of Education 2013 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES Written examination Section Wednesday 20 November 2013
exactly what is needed
JUNIOR For many years of low-maintenance drainpipe cleaning Of course you are familiar with the benefits of drainage in the field or in the greenhouse. Crops grow better and working conditions for preparing
HYDRAULICS. H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long
HYDRAULICS H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long 1. General The series of channels H91.8D has been designed by Didacta Italia to study the hydrodynamic
Installation Manual. Solar Pool Heating System. Read the complete manual before beginning the installation
Solar Pool Heating System Installation Manual Read the complete manual before beginning the installation 1. Sizing the System Visit www.techno-solis.com to size the system using the sizing calculator.
Preventing water damage in the basement
Preventing water damage in the basement Thousands of home insurance claims are filed every year. Some losses are major, others aren t, but they re always an inconvenience and usually avoidable! As prevention
How To Fix A Leaky Water Heater
Preventing water damage caused by plumbing fixtures Thousands of home insurance claims are filed every year. Some losses are major, others aren t, but they re always inconvenient and usually avoidable!
Climate chamber with illumination
KBWF series (E5.2) Climate chambers with illumination Climate chamber with illumination The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural
367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
LK Electric Boiler - 4,5
LK Electric Boiler -, Design LK Electric Boiler, kw is a wall-mounted electric boiler, intended primarily for low-temperature heating systems, e.g. under floor heating. LK Electric Boiler, kw is delivered
DIESEL-FUELED, BLOWN AIR, DUCTABLE HEATERS
DIESEL-FUELED, BLOWN AIR, DUCTABLE HEATERS Electronic thermostatically controlled Low power consumption Compact space saving size Short heat-up times Dehumidification of the cabin Quiet when running Combustion