Analyzer 2.0 Analyzer 2.0 is a comprehensive suite of tools designed to help you analyze complex aqueous and multisolvent electrolyte solution chemistry, thermophysical properties, phase behavior and corrosion phenomena. Currently, there are four highly interrelated tools: Stream Analyzer Corrosion Analyzer Lab Analyzer SCORE Analyzer single point and survey calculations for process streams single point and survey corrosion calculations water analysis reconciliation scaling and corrosion predictions for gas and oil field fluids The installation script is available in two forms: A self-extracting executable file named OLI Analyzer 2.0.exe available for download from the OLI Systems web site. A product distribution CD available from OLI Systems. In addition to the installation disk or self-extracting executable, you will need an OLI Hardlock security key and Serial Number combination or a Serial Number associated with an OLI Network License Server running on your network. If you don t have these, please contact OLI Systems (973-539-4996). Contents 1 Requirements...2 1.1 Hardware...2 1.2 Operating System...2 2 Installation...2 2.1 OLI Hardlock Key (Workstation Security)...3 2.2 OLI Network License Server...3 2.3 Software Setup...3 2.4 Verify Installation...9 2.5 Application Security Settings for Network License Server...9 OLI Systems, Inc. Analyzer 2.0 Page 1
1 Requirements 1.1 Hardware Resource CPU Physical Memory (RAM) Virtual Memory Hard Disk Space Monitor Pointing Device Ports Minimum Requirements Intel Pentium 3 800 MHz or comparable AMD At least 128 MB At least 2 times Physical Memory At least 200 MB free Color with at least 1024 x 768 resolution 2 or 3 button Microsoft compatible mouse 1 Parallel Port or 1 USB port 1.2 Operating System The following table shows the versions of Windows that are supported and the preferred service pack level for each. Operating System MS Windows 98 Second Edition MS Windows ME N/A MS Windows NT 4.0 Service Pack 6 MS Windows 2000 (any) Service Pack 3 MS Windows XP (any) Service Pack 1 Service Packs Please note that OLI no longer supports Windows 95. Also, even though Windows 98 and ME are still supported, it is highly recommended that you upgrade to either Windows 2000 Professional or Windows XP (Home or Professional). Also, if possible, it is advisable to upgrade to Internet Explorer 6.0. This has the side-benefit of making sure that your Windows system has the latest support DLLs for Microsoft s COM subsystem. 2 Installation There are two security options available from OLI: 1) workstation security using a Hardlock key or, 2) network security using the OLI Network License Server. OLI Systems, Inc. Analyzer 2.0 Page 2
If you have been sent an OLI Hardlock key then follow the instructions in Section 2.1 and then proceed to Section 2.3 to install the software. If your organization uses network security then start at Section 2.2 and then proceed to Section 2.3. 2.1 OLI Hardlock Key (Workstation Security) If you downloaded the self-extracting executable from the OLI Systems web site, then you will need to contact OLI (973-539-4996) to obtain a Hardlock key and associated Serial Number. To install the Hardlock key, simply attach it to the parallel port located on the back of your computer. If you have the USB version of the Hardlock key then attach it to any available USB connection. If you have a parallel port version of the Hardlock key and you have a printer connected to the parallel port, then unplug your printer, connect the key and then reconnect your printer to the Hardlock key. The Hardlock key shouldn t interfere with your printer. Also, if you have a parallel port security key for another software product, please make sure that the OLI Hardlock key is connected directly to the parallel port and is first in the chain of keys. 2.2 OLI Network License Server If your organization uses the OLI Network License Server then you will need an application client Serial Number and the IP address of the server running the network license service. Your site administrator will be able to provide you with the information you need. You will need the Serial Number to perform the installation. The IP address will be used after you install the software. 2.3 Software Setup Analyzer 2.0 uses InstallShield to lead you through a typical Windows installation process. The installation is available in two formats: A self-extracting executable file named OLI Analyzer 2.0.exe available for download from the OLI Systems web site. A product distribution CD available from OLI Systems. If you downloaded the self-extracting executable from the OLI Systems web site, then use Windows Explorer to locate the file and double click on the file to start the installation. You will need a password to unzip the self-extracting executable file. Contact OLI for the latest password for this product. If you have a product distribution disk provided by OLI, then insert the CD and run X:\setup.exe (where X: is the drive letter for your CD-ROM). Or, open Windows Explorer, locate setup.exe and double click on it. OLI Systems, Inc. Analyzer 2.0 Page 3
The installation starts with: Click Next to review the license agreement: OLI Systems, Inc. Analyzer 2.0 Page 4
If you agree with the terms of the license agreement, click Yes to proceed to the Customer Information dialog: You will need to complete all of the fields on this dialog. Enter the Serial Number that you received from OLI Systems or your network license administrator. When you are ready click Next to select the installation folder. The default location is C:\Program Files\OLI Systems\Analyzer 2.0. If possible, please use this default location. OLI Systems, Inc. Analyzer 2.0 Page 5
After confirming or changing your destination folder, click Next to continue to the Setup Type dialog: The default selection of Typical installs all of the elements that are licensed. Use the Custom option if you would like to limit the installation. When you are ready, click Next to select the Start Menu program folder: OLI Systems, Inc. Analyzer 2.0 Page 6
You will see the following status dialog while the program files are copied, the program group is created and registry entries are added. If you are using workstation security, the Hardlock device driver installation script will start. This is a very brief installation and you won t be prompted for any information. Click Next to complete this installation. OLI Systems, Inc. Analyzer 2.0 Page 7
Click Finish to close the Hardlock installation. After the Hardlock drivers are installed, you will see the following dialog: Simply click Finish to exit the installation. OLI Systems, Inc. Analyzer 2.0 Page 8
2.4 Verify Installation You can verify your installation by simply making sure that files were installed to the desired installation directory and that program icons have been added to your OLI Systems program group and desktop Open Windows Explorer and navigate to the destination directory: C:\Program Files\OLI Systems\Analyzer 2.0 You should find these subdirectories: AccessDB Analyzer Databanks Manuals Samples Templates Next, click on the Start button and navigate to: Programs\OLI Systems You should see a folder named Analyzer 2.0 with two or more icons (depending on the options that you have licensed): Analyzer 2.0 Help Corrosion Analyzer 2.0 Data Locator 2.0 Lab Analyzer 2.0 Stream Analyzer 2.0 SCORE Analyzer 2.0 On your Windows desktop, you should see an icon for each Analyzer that you license: OLI Corrosion Analyzer 2.0 OLI Lab Analyzer 2.0 OLI Stream Analyzer 2.0 OLI SCORE Analyzer 2.0 2.5 Application Security Settings for Network License Server If you are using network security and the OLI Network License Server is installed and running, you may need to provide an IP address for the network license server. A utility has been provided that makes it easier to test and update security related settings. Click on the Start button and navigate to: Programs\OLI Systems\Analyzer 2.0\Security OLI Systems, Inc. Analyzer 2.0 Page 9
Click on the Security Settings and Test item to start the application: Press the Open Security button. If the OLI Network License Server is visible then the message Open succeeded will appear in the Operation Result field. If not, then the following dialog will appear: OLI Systems, Inc. Analyzer 2.0 Page 10
Click on the Security Options button to open the following settings dialog: Enter an IP address for the server that is running the OLI Network License Server. Alternatively, your network administrator may give you a license server name (binding) to use instead. Either way, input the server address and press OK to accept the changes and close the dialog. Now, press the Open Security button again. If successful, you should see: OLI Systems, Inc. Analyzer 2.0 Page 11
Press the Check Security button to test the connection and then press the Close Security button to close the connection to the license server. You re done, press the Close button to exit the application. Now, try running Analyzer 2.0 by double clicking on a desktop icon. If the OLI Security Error dialog box appears then please contact OLI Systems Support (973-539-4996 ext. 24) for assistance. OLI Systems, Inc. Analyzer 2.0 Page 12