Prisliste 2011. A 010 818 000 Conical chuck for Hofmann Wheel-Balancing Maschines 1.357,00

Similar documents
Rabat kode Varenr Beskrivelse Pris DKK. Mid centering device and Basic centering device. Spring-less Mid centering device

OEM Precision Collets

Vehicles Theft Figures Sweden 2010

GS1201 7mm ISO 3808 Class F, suppressed core 12-20kohm Fits JAGUAR, corresponds with OES quality

Rovaniemi. Oulu. Oulu

UFI FILTERS INNOVATION IN THE SERVICE OF TECHNOLOGY

How To Buy A Car In Chile

General repairs. Spare part kit. CNG filling valve. CNG filling valve. CNG filling valve. Special kit to restore threads on aluminum engine heads.

Elring-Service. Gaskets, Gasket Sets and Service Parts in Original Equipment Quality

TIRE PRESSURE MONITORING SYSTEM

Contents. European Approval - Directives towbar R55. Quality. General information

Extended Warranties for New and Used Cars in Europe

CO 2. emissions performance of car manufacturers in 2010

Injectors. Mechanical kit. Injectors extractor kit - UNIVERSAL. Injectors extractor kit - SSANGYONG. Universal injector kit.

SKP-900 User s Manual

SGS GLOBAL WARRANTY SURVEY 2014 SURVEY OVERVIEW

LANCER BLUEBIRD / 160J / PATHFINDER / SUNNY GRAND CHEROKEE COLT / ECLIPSE / GALANT / LANCER / MONTERO

All replacement hub units are not created equal. What you don t know can cost you time, money, and customers.

OIL PRESSURE SWITCHES MANOCONTACTOS PRESIÓN DE ACEITE MANOCONTACTS PRESSION D HUILE Pgs. 4-19

SP-BO SP-BO SP-BO 3611A SP-BO 3614A SP-BO 3620A SP-BO 3620M2

Contents. European Approval - Directives towbar R55. Quality. General information

LANCER BLUEBIRD / 160J / PATHFINDER / SUNNY GRAND CHEROKEE COLT / ECLIPSE / GALANT / LANCER / MONTERO

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

hub bearing and why is it critical to your safety? A: See inside. It could save your life.

EZ-Steer Assisted Steering System

Press-release 13 May 2014

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

DigiMasterIII-Audio Decoding Car Model List

AD900 Pro key programmer User Manual

Cooling System Service Equipment

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

geodyna wheel balancers

HAND PALLET TRUCK Lift-Rite

Extended Warranties for New and Used Cars in Europe

125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN

Extended Warranties for New and Used Cars in Emerging Global Markets

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja tel: Clamps Clamping devices

INDEX. vii. Explanation of Suffixes and Symbols after shoe number means adjuster mechanism fitted.

Year. Last update. Car Code. SafeCan for the canbus car with remote central door lock version: 4Sxx Hood Open Signal

Driver s Manual 1. Index

KESSv2 MASTER VERSION

AERO FILLER CAPS. BAT Inc. w 7630 Matoaka Road., Sarasota, FL w (941) fax (941)

Common Rail Spare Parts Catalogue

Char-Lynn Hydraulic Motor. Repair Information Series. October, 1997

ARCTIC CAT 1013 ARCTIC CAT 1013

Fixturing systems Fixturing systems for measurement technology

AVDI Diagnostics Price List

O SL. BPW Original spare parts Air suspensions series O / SL / AL BPW BERGISCHE ACHSEN BPW ORIGINAL SPARE PARTS. BPW Original spare parts

Contents. European Approval - Directives towbar R55. Quality. General information

How Clean is Your Car Brand?

Wheel Accessory Products Catalog

PET. Illustration Pos Part Number Description Remark Qty Model jack operating rod tool bag 1

DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)

12. REAR WHEEL/BRAKE/SUSPENSION

Alternators. Starters and Parts. Brush Holders Portaescobillas

See more, feel more, experience more. Aftermarket Sunroofs

MARŞ MOTORU KÖMÜRLERİ CARBON BRUSHES FOR STARTERS BOSCH DENSO FIAT FIAT-DENSO HITACHI MANDO MELROE MELCO MITSUBA DELCO - REMY VALEO

Nombre del producto: EOBD GALLETTO V.1080 FULL VERSION

EZ-Steer Assisted Steering System

TIRE & TUBE SECTION DEFINITIONS: OVERALL WIDTH SECTION HEIGHT (D) OVERALL DIAMETER (A) SECTION WIDTH (B) NOMINAL RIM DIAMETER (C)

Inside Toyota's 'Books of Knowledge'

Number Wheeler P/N Description Set Rex P/N Notes

Oil Filter Port Thread Size Chart

DR90. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

BPW TRANSPEC AIR LIGHT II SERIES AIR SUSPENSIONS SPARE PARTS CATALOGUE FOR AUSTRALIAN ASSEMBLED AXLES

A/C LUBRICANT SPECIFICATION & REPLACEMENT GUIDELINES

Mitsubishi Pajero III. Mitsubishi MR Mitsubishi Pajero III. Mitsubishi MR Honda Civic (FK) 1.4 Jazz III,Insight 1.

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Tires and Wheels. Tires and Wheels. Common Tire Terms. Determing Wheel Offset. Determing Bolt Pattern. Dual Wheel/Rim Spacing

BRAZILIAN AUTOMOTIVE INDUSTRY AT A GLANCE

Rick Galdos, Forensic Engineering 1

GAP Insurance for New and Used Cars in Europe

Illustrated Parts List

Aprilia.no. RS Eng.6M

Extended Warranties for New and Used Cars in Europe

Top Reliability: Cylinder-head gasket and cylinder-head bolts all from one supplier. Cylinder-Head Bolts. A Practical Guide

Automotive Finance and Leasing for Consumers in Europe

Number Wheeler P/N Description Set Rex P/N Notes

New Jersey Motor Vehicle Warranty Act

AUXILIARY AIR SUSPENSION PRODUCT CATALOGUE. Edition 4

Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts.

DR90. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling

2014 Manufacturer Volume Status. Large- and Intermediate-Volume Manufacturer 2014 Vehicle Production Delivered for Sale in OR

FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B

PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB /hohner48/5S/01/KS

Wheel and Torque Specifications

Module 5 Couplings. Version 2 ME, IIT Kharagpur

HENDERSON WHEEL & WAREHOUSE SUPPLY HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013

Delivery Programme 2013

MAN - MERCEDES - BENZ

EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N

Go-kart for little race-drivers

TABLE OF CONTENTS. Section 1 - Assembling your new pit bike.

Transcription:

Prisliste 2011

Chuck / Mid centering device / Adaptors Sets Chuck A 010 818 000 Conical chuck for Hofmann Wheel-Balancing Maschines 1.357,00 Mid centering device and Basic centering device A 100e818 028 Basic centering device conical Tr40x4 covered spring, 240 mm usable length 3.375,00 A 100e818 040 Basic centering device conical Tr40x3 covered spring, 240 mm usable length 3.375,00 A 104 818 038 Mid centering device Tr40x3, 3 cones, ProGrip, 200 mm usable length 5.182,00 A 104 818 131 Mid centering device Tr40x4, 3 cones, ProGrip, 240 mm usable length 5.362,00 A 104 818 132 Mid centering device Tr40x3, 3 cones, ProGrip, 240 mm usable length ProGrip Kit and Adaptor Sets 5.362,00 A 124 283 000 ProGrip kit Tr 28,55x3 Includes 143 283 003 / 190 008 002 1.150,00 A 124 283 001 ProGrip kit Tr 28.55x3 Includes 143 283 006 / 190 008 002 1.150,00 A 124 363 000 ProGrip kit Tr 36x3 Includes 143 363 003 / 190 008 002 1.150,00 A 124 383 000 ProGrip kit Tr 38x3 Includes 143 383 003 / 190 008 002 1.150,00 A 124 403 000 ProGrip kit Tr40x3 Includes ProGrip 143 403 003 and 190 008 002 1.150,00 A 124 404 000 ProGrip kit Tr40x4 Includes ProGrip 143 404 003 and 190 008 002 1.150,00 A 124 405 000 ProGrip kit Tr40x4 Includes 143 405 003 / 190 008 002 1.150,00 A 124 408 005 ProGrip Kit Tr 40x8,46 Includes 140 408 033 / 190 008 002 1.950,00 page 1

A 124 589 030 Adaptor set Cemb & TipTop Tr40x4 Shaft, 3 cones, ProGrip Kit 2.750,00 A 124 627 036 Adaptor set Fasep 3 cones, ProGrip Kit,Shaft 2.750,00 A 124 658 031 Adapter set HAWEKA BM1000-8000 Tr40x3 Shaft 3 Cones, ProGrip Kit 2.750,00 A 124 907 032 Adaptor set Corghi / Sice / Faip Tr38x3. Shaft 3 Cones, ProGrip Kit 2.750,00 A 124 907 230 Adapter-Set, Mondolfo, Corghi, HPA, Tr40x3 Shaft, ProGrip Kit, 3 Cones, clamping hood 2.750,00 A 124 957 033 Adaptor set Balco/Haweka Tr40x3 shaft, ProGrip Kit, 3 cones 2.750,00 A 124 957 530 Adaptor set Balco/Snap-On/Sun 28,55x3 mm shaft ProGrip Kit, turning handles 3 cones 2.750,00 A 124 958 037 Adaptor set Balco/JBC serie 9000, 40x3 Shaft, ProGrip Kit, 3 cones Quick nuts ProGrips / Accessories Quick nuts ProGrip (Version: steel) 2.750,00 A 140 403 033 ProGrip Tr 40 x 3 mm 1.925,00 A 140 404 033 ProGrip Tr 40 x 4 mm 1.925,00 A 140 408 033 ProGrip Tr 40 x 8.46 mm Hunter Serie 9600 1.925,00 A 140 466 003 ProGrip Tr 46 x 6 mm Corghi Lkw 2.750,00 page 2

ProGrip quick nuts A 143 283 003 ProGrip Tr 28,55 x 3 mm 960,00 A 143 283 006 ProGrip Tr 28,55 x 3 mm, with turning Handles 960,00 A 143 285 003 ProGrip Tr 28,55 x 3,5 mm 960,00 A 143 285 006 ProGrip Tr 28,55 x 3,5 mm, with turning handles 960,00 A 143 363 003 ProGrip Tr 36 x 3 mm 960,00 A 143 363 006 ProGrip Tr 36 x 3 mm, with turning handles 960,00 A 143 383 003 ProGrip Tr 38 x 3 mm 960,00 A 143 383 006 ProGrip Tr 38 x 3 mm, with turning handles 960,00 A 143 403 003 ProGrip Tr 40 x 3 mm 960,00 A 143 403 006 ProGrip Tr 40 x 3 mm, with turning handles 960,00 A 143 404 003 ProGrip Tr 40 x 4 mm 960,00 A 143 404 006 ProGrip Tr 40 x 4 mm, with turning handles 960,00 A 143 405 003 ProGrip Tr 40 x 4 mm original Hofmann 960,00 A 143 405 006 ProGrip Tr 40 x 4 mm with turning handles, original Hofmann 960,00 A 143 408 003 ProGrip Tr 40 x 8,46 mm Hunter Serie 9200 960,00 page 3

Cones / Centering Rings / Conical Rings Pressure Pieces Enter diameter of the balancer shaft as 4th and 5th number (28, 36, 38, 40) A 150 xx0 008 Centering cone 42-64,5 mm 346,00 A 150 xx0 009 Centering cone 54-79,5 mm 346,00 A 150 xx0 010 Centering cone 74-99,5 mm 404,00 A 150 xx0 011 Centering cone 44-80 mm 426,00 A 150 xx0 012 Centering cone 74-111,5 mm 453,00 A 150 xx0 020 2-cone set 44-111,5 mm (011 / 012) 701,00 A 150 xx0 021 3-cone set 42-99,5 mm (008 / 009 / 010) 891,00 A 150 400 022 Centering cone 168,5-194,5 mm 1.870,00 A 150 400 024 Centering cone 198-225 mm / only with Plastic Spacer disc 190 xx0 042 1.340,00 A 150 xx0 025 Centering cone for trucks 277,4-283 mm 1.695,00 A 150 xx0 026 Set of light truck cones 88-174 mm (043 / 049 / 190 xx0 018) 2.301,00 A 150 xx0 043 Centering cone 122-174 mm 1.065,00 A 150 xx0 048 Centering cone 68-98 mm 390,00 A 150 xx0 049 Centering cone 88-132mm 701,00 page 4

A 150 xx0 072 Centering Cone 137-140,5mm Ford Transit from 1995 1.030,00 A 150 xx0 074 Centering Cone 128-131,5 mm Iveco from 1997 1.030,00 A 150 xx0 085 3-Centering cone set 42-111,5 mm (008 / 009 / 012) 990,00 A 150 xx0 091 Centering Cone 122-174mm (043 / 190 xx0 018) 1.765,00 A 150 xx0 092 Centering Cone 100-118mm 701,00 A 150 xx0 097 Conical ring "A" 56,3-58,2 mm 690,00 A 150 xx0 098 Conical ring "B" 63,1-65,3 mm 690,00 A 150 xx0 099 Conical ring "C" 71,3-74,2 mm 690,00 A 150 xx0 100 Conical ring "D" 58,3-60,5 mm 690,00 A 150 xx0 101 Conical ring "E" 65,8-67,7mm 690,00 A 150 xx0 102 Conical ring "F" 52-56,2 mm 690,00 Centering sleeve Enter diameter of the balancer shaft as 4th and 5th number (28, 36, 38, 40) A 160 xx0 004 Centering sleeve 63.25 / 63.5 mm 690,00 A 160 xx0 006 Centering sleeve 58 / 65 mm 690,00 A 160 xx0 008 Centering sleeve OPEL 56.5 / 65 mm 690,00 A 160 xx0 009 Centering sleeve Porsche 959 58 mm 690,00 page 5

A 160 xx0 011 Centering sleeve 55 / 60 / 65 mm 690,00 page 6

A 160 xx0 012 Centering sleeve 54 / 60 / 64 mm 690,00 A 160 xx0 017 Centering sleeve General Motors USA 57/70,5/78 mm 690,00 A 160 xx0 027 Centering sleeve Rolls Royce (-`95) 72,5 mm 690,00 160 xx0 028 Centering sleeve Rolls Royce (old) 117,53 mm 690,00 A 160 xx0 030 Centering sleeve Toyota 110,05 mm 690,00 A 160 xx0 031 Centering sleeve BMW 57 / 72,5 / 74 mm 690,00 A 160 xx0 032 Centering sleeve 56 / 66 / 71.5 mm 690,00 A 160 xx0 038 Centering sleeve BMW/ Ford (USA) 63.6-64.4 / 72.1-73 mm 690,00 A 160 xx0 051 Centering sleeve Mercedes 66,5-67,3 / 84-85 mm 690,00 A 160 xx0 053 Centering sleeve Toyota / Nissan Off Road 106 / 110 mm 690,00 A 160 xx0 055 Centering sleeve Renault / Dacia 59-60 / 66 / 71 mm 690,00 A 160 xx0 056 Centering sleeve Crafter / Sprinter 161 mm 1.965,00 A 160 xx0 060 Centering sleeve Ford/KIA/Hyundai (USA) 86.4-87.3 / 91-96 mm 775,00 A 160 xx0 061 Centering sleeve Land Rover 72.5 mm 690,00 A 160 xx0 062 Centering sleeve Off Road (USA) 99-101.5 / 105-110.7 mm 775,00 A 160 xx0 063 Centering sleeve Off Road 66,5-67,5 / 71-72 mm 690,00 page 7

A 160 xx0 064 Centering sleeve Doge / Chrysler 73.6-74.6 / 77-78.5 mm 690,00 Wire Wheel Kits B 162 400 040 Centering kit for spoke wheels with central locker, 40/52 mm 1.410,00 B 162e400 001 Cone for Astin Martin DB 6, Jaguar, Triumph, Austin Healy 690,00 B 162e400 002 Centering ring, conical for Jaguar, Triumph, Austin Healy 1.035,00 B 162e400 003 Centering ring, conical for Aston Martin DB 6, old Jaguar 1.035,00 Pneumatic Handles A 163 008 007 Pneumatic handle Hofmann, JBC, Sicam P, Power Clamp for clamping hood 848,00 A 163 588 004 Pneumatic handle Cemb P for clamping hood (36 mm) 848,00 A 163 589 004 Pneumatic handle Cemb & Tip Top P, Ravaglioli P for clamping hood (40 mm) DuoExpert DuoExpert Serie III 848,00 A 165 400 005 DuoExpert III System. 3 collets in a case 54-78mm. 5.198,00 A 165 400 001 DuoExpert collet I, 54-62 mm clamping range 1.800,00 A 165 400 002 DuoExpert collet II, 62-70 mm clamping range 1.800,00 A 165 400 003 DuoExpert collet III, 70-78 mm clamping range 1.800,00 A 165 400 006 DuoExpert collet IV, 78-86 mm clamping range 1.800,00 A 165 400 004 DuoExpert collet V, 86-94 mm clamping range 1.950,00 page 8

Spare parts for DuoExpert Serie III 165e008 004 Rubber ring DuoExpert III, collet I, II, III, IV 143,00 165e400 001 Basic collet DuoExpert III, collet I, II, III, IV 668,00 B 164e008 011 Rubber ring DuoExpert III, collet V 143,00 165e400 002 Basic collet DuoExpert III, collet V 668,00 Spare parts for DuoExpert Serie II B 164e008 011 Rubber ring DuoExpert 143,00 B 164e008 101 Basic collet DuoExpert 40 mm inside diameter 1.335,00 B 164e008 110 Synchronizing ring DuoExpert 375,00 B 164e008 111 Expanding segment DuoExpert collet 54-65 mm 375,00 B 164e008 112 Expanding segment DuoExpert collet 64-75 mm 375,00 Threaded Shafts A 170 589 001 Threaded shaft Tr 40x4mm Cemb & TipTop 190 mm long with screw M10 A 170 618 001 Threaded shaft Tr 40x8,46 P2, 250 mm long, Hunter GSP/DSP 9200+GSP9720 1.808,00 A 170 627 008 Threaded shaft 38x3mm Fasep 180 mm Long, connection M22 x 1,5 A 170 658 001 Threaded shaft Tr40x3 mm Mondolfo MT 1000-8000 with screw M12 A 170 658 003 Threaded shaft Tr40x3 mm Mondolfo (truck) Far East with screw M12 A 170 907 004 Threaded shaft Tr38x3 mm Corghi/Faip/Sice 215 mm long with screw M15 x 1,5 page 9

A 170 907 007 Threaded shaft Tr 40x3 Mondolfo 181 mm long with screw M15 x 1,5 A 170 928 001 A 170 957 002 A 170 957 011 Threaded shaft Tr 40x3 mm HAWEKA/BM 22/44/55/550 with screw M16 Threaded shaft Tr28,55x3 mm Balco/Sun/Snap-on, extra long version, 200 mm, connection 3/8"-24 UNF Threaded shaft Tr28.55x3.5, John Bean, Balco, SnapOn Serie 900,186 mm, connection 3/8"-24 UNF A 170 958 001 Threaded shaft Tr40x3 mm Balco with screw 3/8"-24 UNF A 170 958 002 Threaded shaft Tr40x4 mm Snap On/JBC USA with screw 3/8"-24 UNF A 170 958 006 Threaded shaft Tr40x3 Balco/JBC line 9000 300 mm long connection M33 x 2 170 988 001 Threaded shaft Tr40x3, 260 mm Cemb, with screw M10 A 170 988 002 Threaded shaft Tr40x3, 260 mm Cemb, (Ø 36 mm to Ø 40mm) Clamping Hoods / Spacer Discs & Springs Enter diameter of the balancer shaft as 4th and 5th number (28, 36, 38, 40) A 190 008 002 Clamping hood fits ALL Haweka wing nuts 248,00 A 190 008 005 Rubber cap for clamping hood 190 008 002 60,00 A 190 008 021 Large diameter (220mm) clamping hood for alloy rims. Suits ALL Haweka wing nuts 495,00 A 190 008 027 Pressure ring, fits ALL Haweka wing nuts 60,00 A 190 400 008 Special pressure piece for Porsche 390,00 A 190 400 015 Spring, conical for open MCD, DuoExpert 60,00 page 10

A 190 658 001 Steel spacer Mondolfo 1.613,00 A 190 905 001 Steel spacer Corghi 1.613,00 A 190 958 001 Steel spacer Balco 1.613,00 A 190 988 002 Steel spacer Cemb / Haweka 1.613,00 A 190e008 047 Distance ring with magnets for Off-Road cone from the back incl. Pin 1.440,00 A 190 xx0 010 (Polyamid) Spacer DuoExpert 90,00 A 190 xx0 018 Aluminium Spacer disc 998,00 A 190 xx0 042 Polyamid Spacer disc / for Centering cone 150 xx0 024 818,00 A 190exx0 045 Polyamid spacer (donut) for Off-Road 113,00 Flange Plates WORLD KIT Flange Plates WORLD KIT (Ø 11 mm) Enter diameter of the balancer shaft as 7th and 8th number (28, 36, 38, 40) A 200 009 xx5 Set of 4 flange adaptors, professional set with 5 sets of studs, colour-coded, 2 wall boards, wallchart, CD-Rom and Off Road Spacer 10.300,00 A 200 009 xx9 Off Road Set with 2 flange plate adaptors, colour-coded, 2 sets of studs, incl. 1 wall board, wallchart, CD Rom and Off Road Spacer 6.520,00 A 203 009 405 Set of 4 flange plate adaptors, professional set, colour coded with 5 sets of studs, 2 wall boards, wallchart, CD-Rom and Off Road Spacer for Hofmann "Power Clamp" 13.020,00 A 203 009 xx9 Off Road Set with 2 flange plate adaptors, colour-coded, 2 sets of studs, incl. 1 wall board, wallchart, CD Rom and Off Road Spacer,suits Hofmann "Power Clamp" 7.860,00 A 205 009 xx5 Set of 4 flange plate adaptors, colour-coded with 5 sets of studs, 2 wall boards, wall chart, CD Rom and Off Road Spacer for Cemb/Tip Top (36 or 40 mm) 13.020,00 page 11

A 205 009 xx9 Off Road Set with 2 flange plate adaptors, colour-coded, 2 sets of studs, incl. 1 wall board, wall chart, CD-Rom and Off Road Spacer for Cemb/Tip Top (36 or 40 mm) 7.860,00 Flange Plates / Studs / Special Sets Flange Plates Series WORLD KIT (Ø 11 mm) w/o studs A 241e801 xx9 Flange Plate Adaptor (TSP No. 1), colour-coded, without studs 4x95,25/ 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x170 1.560,00 A 251e801 xx9 Flange Plate Adaptor (TSP No. 2), colour-coded, without studs 5x98/ 5x105/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154,95 1.560,00 A 251e901 xx9 Flange Plate adaptor (TSP No. 3) Off Road, colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165,1 1.560,00 A 231e111 xx9 Flange Plate Adaptor (TSP No. 4) Off Road, colour-coded, without studs 3x98/ 3x112/ 3x114.3/ 3x115/ 3x120/ 3x127/ 3x130/ 3x132/ 6x135/ 6x139.7/ 4x165.1 1.560,00 Flange Plates Series WORLD KIT (Ø 11 mm) w/o studs Hoffmann / JBC / Sicam P A 243e801 409 Flange Plate Adaptor (TSP No. 1), colour-coded, without studs 4x95,25/ 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x170 2.410,00 A 253e701 409 Flange Plate Adaptor (TSP No. 2), colour-coded, without studs 5x98/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154,95 2.410,00 A 253e901 409 A 233e111 409 A 245e801 409 Flange Plate adaptor (TSP No. 3), colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165,1 Flange Plate Adaptor (TSP No. 4), colour-coded, without studs 3x98/ 3x112/ 3x114,3/ 3x115/ 3x127/ 3x130/ 6x135/ 6x139,7/ 4x165,1 Flange Plates Series WORLD KIT (Ø 11 mm) w/o studs Tip Top / Cemb Ø 40 Flange Plate Adaptor (TSP No. 1), colour-coded, without studs 4x95,25/ 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x170 2.410,00 2.410,00 2.410,00 A 255e701 409 Flange Plate Adaptor (TSP No. 2), colour-coded, without studs 5x98/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154,95 2.410,00 A 255e901 409 A 235e111 409 Flange Plate adaptor (TSP No. 3), colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165,1 Flange Plate Adaptor (TSP No. 4), colour-coded, without studs 3x98/ 3x112/ 3x114,3/ 3x115/ 3x127/ 3x130/ 6x135/ 6x139,7/ 4x165,1 2.410,00 2.410,00 page 12

Studs for Flange Plates WORLD KIT (Ø 11 mm) A 271 994 117 Plug-in Stud "I" 100 mm long, Ø 19 mm 189,00 A 271 804 118 Plug-In Stud "II" 80 mm long, short taper, Ø 24,5 mm 189,00 A 271 904 119 Plug-In Stud "III" 90 mm long, rounded head, Ø 24,5 mm 189,00 A 271 804 120 Plug-In Stud "IV" 80 mm long, Range/Land Rover, Ø 34 mm 220,00 A 271 994 121 Plug-In Stud "V" 100mm long, short taper, Ø 22,5 mm 189,00 Special Studs Series WORLD KIT (Ø 11 mm) A 271 124 122 Plug-In Stud "VI", 120 mm long, short taper, Ø 22,5 mm 189,00 A 271 994 308 Plug-In Stud, spring-loaded, 100 mm long, short taper, Ø 24,5 mm 270,00 A 271 008 002 O-rings for plug-in-stud (Ø 11 mm) (set of 5 pcs.) 39,00 Flange Plates STANDARD KIT (Ø 12 mm) Flange Plates for Fixed Studs (w/o studs) (Standard Stud 270 804 014) Enter diameter of the balancer shaft as 7th and 8th number (28, 36, 38, 40) A 240e101 xx2 Flange plate adaptor 4x100, without Studs 835,00 A 240e102 xx0 Flange plate adaptor 4x108, without Studs 835,00 A 240e103 xx0 Flange plate adaptor 4x130, without Studs 835,00 A 240e104 xx0 Flange plate adaptor 4x114.3, without Studs 835,00 A 250e101 xx0 Flange plate adaptor 5x112, without Studs 835,00 page 13

A 250e102 xx0 Flange plate adaptor 5x120, without Studs 835,00 A 250e104 xx0 Flange plate adaptor 5x108, without Studs 835,00 A 250e105 xx0 Flange plate adaptor 5x130, without Studs 835,00 A 250e107 xx0 Flange plate adaptor 5x114.3, without Studs 835,00 A 250e108 xx0 Flange plate adaptor 5x100, without Studs 835,00 A 260e113 xx0 Flange plate adaptor 6x130 / 6x120 / 6x125, without Studs, Mercedes Benz Sprinter from 01.01.06 / Iveco 835,00 Flange Plates Series Light Truck (Ø 12 mm) w/o fixed studs A 221e201 xx0 Flange plate adaptor 5x160 / 6x180 2.289,00 A 231e403 xx2 Flange plate adaptor 5x203.2/ 205/ 208 -- 6x184.15/ 222.25 2.289,00 Fixed Studs for Flange Plates (Ø 12 mm) A 270 804 003 Fixed stud, short taper 80 mm long, Ø 24,5 mm (recommended standard stud) 189,00 A 270 804 014 Fixed stud, long taper 80 mm long, Ø 25,4 mm 189,00 A 270 354 000 Fixed stud 35 mm long, truck, (Japan ), Ø 39,5 mm 189,00 Special Studs for Flange Plates with Fixed Studs (Ø 12 mm) A 270 804 005 Fixed stud, rounded head 80 mm long, Ø 24,5 mm 189,00 A 270 904 014 Fixed stud, long taper 90 mm long, Ø 24,5 mm 189,00 A 270 994 002 Fixed stud, rounded head 100 mm long, Porsche, Ø 24,5 mm 189,00 page 14

Single Flange Plates w/o studs Standard Set - Car Manufacturers - A 201e402 xx0 Flange plate adaptor 3x112/ 5x112/ 130/ 140 Mercedes Benz (recomm. stud 271 804 003) A 211e201 xx0 Flange plate adaptor 4x100/ 5x120, BMW (spring-loaded studs needed 271 994 208) A A 251e408 xx0 231e505 xx3 Flange plate adaptor 5x98/ 108/114,3/118 Peugeot/Citroen/Renault (recomm. stud 271 804 003) Single Flange Plates w/o studs Standard Set (Ø 12mm ) Flange plate adaptor Off Road 5x 114,3-5/6x 139,7-4/5x 165,1 (without Studs) A 241e603 xx0 Flange plate adaptor 4 x 98 / 100 / 108 / 110 / 114.3 / 120 (without Studs) A 251e603 xx0 Flange plate adaptor 5 x 100 / 108 / 112 / 114,3 / 120 / 130 (without Studs) A 251e608 xx0 Flange plate adaptor 5 x 98 / 100 / 108 / 112 / 120 / 130 (without Studs) A 251e611 xx0 Flange plate adaptor 5 x 100 / 108 / 110 / 112 / 120 / 130 (without Studs) A 251e615 xx0 Flange plate adaptor 5x105/ 110/ 115/ 118/ 120/ 130 (without Studs) Plug-in Studs for Flange Plates (Ø 12 mm) A 271 804 003 Plug-in stud 80 mm long, short taper, Ø 24,5 mm 184,00 A 271 804 014 Plug-in stud 80 mm long, long taper, Ø 24,5 mm 184,00 A 271 994 002 Plug-in stud, Porsche VW, Audi, 90 mm long, Ø 24,5 mm 184,00 A 271 904 012 Plug-in stud 90 mm long, long taper, Ø 24,5 mm 184,00 A 271 994 016 Plug-in stud 100 mm long, long taper, Ø 22,5 mm 184,00 A 271 994 208 Plug-in stud 100 mm long, spring-loaded, short taper, Ø 24,5 mm 270,00 page 15

A 271 008 001 O-rings for plug-in-stud (Ø 12 mm) (set of 5 pcs.) 39,00 page 16

Special Studs for Flange Plates (Ø 12 mm) A 271 124 002 Plug-in stud 120 mm long, rounded head, Porsche, Ø 24,5 mm 180,00 A 271 124 009 Plug-in stud 120 mm long, long taper, Ø 24,5 mm 180,00 A 271 994 002 Plug-in stud 100 mm long, rounded head, Porsche, Ø 24,5 mm 180,00 A 271 994 012 Plug-in stud 100 mm long, long taper, Ø 24,5 mm 180,00 Flange Plate QuickPlate / Heads QuickPlates Enter diameter of the balancer shaft as 7th and 8th number (28, 36, 38, 40) B 200 456 xx9 Set of QuickPlates (4-, 5 and 6-holes-plate) incl. wall board 14.970,00 B 200 450 409 Set of QuickPlates (4 and 5-holes-plate) incl. wall board 9.400,00 B 249 010 xx0 QuickPlate 4-holes with standard heads (4 pcs. 273e008 002) 4.200,00 B 259 010 xx0 QuickPlate 5-holes with standard heads (5 pcs. 273e008 011 + 5 pcs. 273e008 006) 5.100,00 B 269 010 xx0 QuickPlate 6-holes with standard heads (6 pcs. 273e008 003) 5.900,00 Starter-Kit "Cars" 200 450 402 203 450 402 205 450 402 DuoExpert collet #1,#2,#3. QuickPlate 4- a. 5-holes, heads, wall board DuoExpert collet #1,#2,#3, QuickPlate 4- a. 5-holes, heads, wall board. For elektromech. Wheel-Balancing Maschines (Hofmann / JBC / Sicam P) DuoExpert collet #1,#2,#3, QuickPlate 4- a. 5-holes, heads, wall board. For elektromech. Wheel-Balancing Maschines (TipTop / Cemb) -- **-- -- **-- -- **-- page 17

QuickPlates PN Hofmann / JBC / Sicam P (for Pneumatic Wheel-Balancing-Machines) B 203 456 409 Set of QuickPlates Hofmann (4-, 5-,6-holes-plate with pneumatic handle) incl. Wall board 16.700,00 B 249 818 403 QuickPlate 4-holes for Hofmann with standard heads (4 pcs no. 273e008 002) and pneumatic handle 4.800,00 B 259 818 403 QuickPlate 5-holes for Hofmann with standard heads (5 pcs 273e008 011 + 5 pcs 273e008 006) and pneumatic handle 5.700,00 B 269 818 403 B 205 456 409 QuickPlate 6-holes for Hofmann with standard heads (6 pcs no. 273e008 003) and pneumatic handle QuickPlates PN Tip Top / Cemb Ø 40 mm (for Pneumatic Wheel-Balancing-Machines) Set of QuickPlates Cemb Ø 40 mm (4-, 5-,6-holes-plate with pneumatic handle) incl. Wall board 6.400,00 16.500,00 B 249 589 403 QuickPlate 4-holes for Cemb Ø 40 mm with standard heads (4 pcs no. 273e008 002) and pneumatic handle 4.800,00 B 259 589 403 QuickPlate 5-holes for Cemb Ø 40 mm with standard heads (5 pcs 273e008 011 + 5 pcs 273e008 006) and pneumatic handle 5.700,00 B 269 589 403 A 207 400 000 QuickPlate 6-holes for Cemb Ø 40 mm with standard heads (6 pcs no. 273e008 003) and pneumatic handle FixPlates (sellout) Set of 4 FixPlate, colour-coded, with 10 studs, 25 heads for studs, 1 wall boards, wallchart 6.400,00 11.235,00 A 247c701 407 FixPlate (No. 1), colour-coded, without studs 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x170 1.945,00 A 257c801 407 FixPlate (No. 2), colour-coded, without studs 5x98/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154,95 1.945,00 A 257 901 407 FixPlate ( No. 3) Off Road, colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165,1 1.945,00 A 237 901 407 FixPlate (No. 4) Off Road, colour-coded, without studs 3x98/ 3x112/ 3x114,3/ 3x115/ 3x127/ 3x130/ 6x135/ 6x139,7/ 4x165,1 1.945,00 page 18

Stud for Flange Plate FixPlate A 274 008 001 Plug-in stud for FixPlate without head 220,00 Heads B 273e008 003 Head, short taper, length head 38 mm, Ø 24,5 mm 89,00 B 273e008 006 Head, rounded, length head 38 mm, Ø 24,5 mm 89,00 B 273e008 011 Head, long taper, length head 48 mm, Ø 22,5 mm 89,00 Special Heads B 273e008 004 Head, short taper, length head 48 mm, Ø 24,5 mm 89,00 B 273e008 007 Head, rounded, length head 48 mm, Ø 24,5 mm 89,00 B 273e008 009 Head, Range-, Landrover, length head 28 mm, Ø 34 mm 120,00 B 273e008 023 Head, long taper, length head 55,6 mm, Ø 19,0 mm 89,00 B 273e008 025 Head, long taper, length head 58 mm, Ø 22,5 mm 89,00 page 19

Special Adaptor Kits - automotive manufacturer - Quad / ATV A 280 400 055 Centering kit for Quad-rims 1.845,00 BMW A 280 400 057 Centering kit 2.820,00 VW Crafter MB Sprinter A 280 400 061 LLkw Adapter Ø 205 3.459,00 L-Lkw VW / Mercedes A 280 400 064 Centering kit 2.160,00 Off Road A 280 400 073 Centering kit 8.985,00 Porsche A 280 400 076 Centering kit for central shutter 1.065,00 Porsche A 280 400 106 Centering kit 5 x 130 mm 2.610,00 Renault Dacia A 280 400 079 Centering kit 3.638,00 Opel A 280 400 080 Centering kit 4.765,00 Mercedes A 280 400 081 Centering kit 2.740,00 Alfa Romeo Lancia A 280 400 085 Centering kit 6.360,00 Chrysler A 280 400 086 Centering kit 8.235,00 Peugeot Citroen A 280 400 087 Centering kit 12.735,00 page 20

Daihatsu A 280 400 088 Centering kit 4.785,00 Ferrari A 280 400 089 Centering kit 5.740,00 Fiat A 280 400 090 Centering kit 7.015,00 Ford (EU) A 280 400 091 Centering kit 9.900,00 Honda A 280 400 092 Centering kit 5.985,00 Hyundai A 280 400 093 Centering kit 8.235,00 Jaguar A 280 400 094 Centering kit 6.360,00 Kia A 280 400 095 Centering kit 5.740,00 Lamborgini (VW) A 280 400 096 Centering kit 4.710,00 Maserati A 280 400 097 Centering kit 7.015,00 Mitsubishi A 280 400 098 Centering kit 8.610,00 Mazda A 280 400 099 Centering kit 7.335,00 Rolls-Royce Bentley A 280 400 101 Centering kit 5.085,00 Saab Volvo A 280 400 102 Centering kit 8.610,00 Subaru A 280 400 103 Centering kit 5.085,00 Suzuki A 280 400 104 Centering kit 6.360,00 page 21

Toyota Lexus A 280 400 105 Centering kit 7.935,00 Nissan Infiniti A 280 400 107 Centering kit 8.910,00 page 22

Reducing Sleeves A 290 280 001 Reducing sleeve 40 mm to 28 mm 50 mm long 210,00 A 290 360 001 Reducing sleeve 40 mm to 36 mm 50 mm long 210,00 A 290 380 001 Reducing sleeve 40 mm to 38 mm 50 mm long 210,00 Universal Clamping Devices Centering Rings Series UniLug 400 A 360 008 001 Centering ring 58 mm fits HAWEKA universal adaptors 375,00 A 360 008 002 Centering ring 60 mm fits HAWEKA universal adaptors 375,00 A 360 008 004 Centering ring 65 mm fits HAWEKA universal adaptors 375,00 UniLug / Series 400 + 405 UniLug Series 405 (incl. 3 Centering rings, 58,60, 65 mm) A 405 280 108 UniLug for machines with 28,56 mm shaft, Mondolfo, Balco, Snap On, US-Market 4.500,00 A 405 360 108 UniLug for machines with 36 mm shaft, Cemb, Ravaglioli 4.500,00 A 405 380 108 UniLug for machines with 38 mm shaft, Corghi, Faip, Sice, HPA incl. Spacer 405e008 004 4.500,00 A 405 381 108 UniLug for machines with 38 mm shaft, Fasep 4.500,00 A 405 400 108 UniLug for machines with 40 mm shaft, TipTop, Cemb, Ravaglioli, US-Market, Mondolfo (2005/06), Hunter 9200 4.500,00 A 405 401 108 UniLug for machines with 40 mm shaft, Corgi, HPA, Teco, Mondolfo ( from 2007) incl. Spacer 405e008 004 4.500,00 A 405 818 108 UniLug for machines with conical shaft, Beissbarth, Sicam, Facom, Hofmann, Schenck 4.700,00 A 405e008 004 UniLug Spacer for Corghi, Faip, Sice, HPA, Mondolfo TECO 745,00 page 23

A 405e280 001 UniLug Adaptor ring Ø 28 mm 415,00 A 405e360 001 UniLug Adaptor ring Ø 36 mm 415,00 A 405e380 001 UniLug Adaptor ring Ø 38 mm 415,00 A 405e400 001 UniLug Adaptor ring Ø 40 mm 415,00 Centering Rings series 405 A 405e009 001 Centering ring 58 mm 390,00 A 405e009 002 Centering ring 60 mm 390,00 A 405e009 004 Centering ring 65 mm 390,00 Spare Parts for UniLug Series 400 and 405 A 405e008 006 Control disc UniLug II (plastic) 195,00 A 400e008 021 Complete lug for UniLug (series 405) 506,00 A 400e008 023 Fit screw UniLug II (serie 405) height of head 2,5 mm 105,00 A 400e008 050 Fit screw UniLug II (serie 405) height of head 3,2 mm 105,00 A 400e008 027 Knurled nut for lug 400e008 041 60,00 A 400e008 041 Complete lug for UniLug series 400, conical 505,00 A 400e818 001 Knurled nut M14x1.5 for Hofmann Geodyna Power Clamp 115,00 A 400e818 002 Knurled nut M14 for Hofmann P (AIR) 115,00 page 24

A 490 008 000 PCD tool for UniLug 255,00 B 490 008 002 PCD measuring tool 285,00 Nuts and Fixcones A 040 100 001 Set of fixcones (5 pieces) M10x1,25 mm (Haweka) 1.695,00 A 040 100 002 Set of fixcones (5 pieces) M10x1,5 mm (Corghi/Cemb) 1.695,00 A 040 100 003 Single Fixcone M10x1,25 mm (Haweka) 415,00 A 040 100 004 Single Fixcone M10x1,5 mm (Corghi/Cemb) 415,00 A 040 100 102 Fastening nut M10x1,25 mm round and cone head (Haweka) (1 pcs. 60,00 A 040 100 112 Fastening nut M10x1,25 mm extra long, round head, new Peugeots 75,00 A 040e008 004 Pressure piece for fixcone round head 75,00 A 040e008 005 Pressure piece for fixcone conical 75,00 page 25

Truck Clamping Devices Truck Adaptors - Kits A 700 400 201 Truck Adapter Kit Hunter 9.715,00 A 700 589 172 Truck Adapter Kit Cemb 40 8.095,00 A 700 658 174 Truck adaptor kit Mondolfo 9.330,00 A 700 818 172 Truck adaptor kit Hofmann Geodyna 20 L, B 9200 9.910,00 A 700 905 174 Truck adaptor kit Corghi ET 76/86, Faip, Sice 9.910,00 A 702 818 172 Truck/light truck adaptor kit Hofmann, Sicam, Bosch, B 9200 12.820,00 A 702 818 175 Truck/light truck adaptor kit Sicam / Beissbarth / Facom 13.410,00 A 704 658 172 Truck/light truck adaptor kit Mondolfo, Far East Version 8.745,00 A 705 589 172 Truck/light truck adaptor kit Cemb 40 13.165,00 Truck Adaptors - Spare parts A 700 008 003 Centering Bolt & Nut Truck (stundard) 235,00 A 700 008 004 Centering Bolt & Nut Truck (Dynaf) 235,00 A 700 008 005 Centering Bolt & Nut Truck (IFA) 235,00 A 700 008 006 Centering Bolt & Nut Truck (Alloy wheels) 235,00 A 700 008 013 Centering Bolt & Nut Truck (3 arm star Far East) 235,00 A 700 008 018 Centering Bolt & Nut Truck (3 arm star Europe) 235,00 page 26

A 700e400 004 5-arm clamping star truck standard w/o bolts Circle Diameter: 225 / 285 / 335 mm 3.120,00 A 700e400 005 4-arm clamping star truck standard w/o bolts Circle Diameter: 275 / 285 mm 2.505,00 A 700e400 006 5-arm clamping star truck Far East w/o bolts Circle Diameter: Ø12 (203,2 / 208 mm), Ø16 (285,75 / 335 mm) 3.120,00 A 700e400 008 3-arm clamping star truck w/o bolts Circle Diameter: 170 / 184.15 / 205 / 222.25 / 245 1.897,00 A 70Be958 007 Truck Centering ring 220.8 mm 1.680,00 A 70Be958 008 Truck Centering ring 219.9 mm 1.680,00 A 700e798 009 Truck Centering ring 202 mm 1.680,00 Trilex and Dayton Adaptors A 725 400 001 Trilex Adaptor 20" / 24", Fisher / Dayton 8.110,00 A 725 400 002 Trilex Adaptor 20" / 22,5" / 24", Europa 8.110,00 A 725 460 001 Trilex Adaptor 20" / 24", Fisher / Dayton 8.110,00 A 725 460 002 Trilex Adaptor 20" / 22,5" / 24", Europa 8.110,00 page 27

Motorcycle Clamping Devices - Series 805 Motorcycle Clamping Device - for conical shafts A 805 818 010 ProBike II Modular System ECO 4.875,00 A 805 818 000 ProBike II Modular System STANDARD 6.985,00 A 805 818 001 ProBike II Upgrade Kit Modular System PROFESSIONAL 5.155,00 Motorcycle Clamping Device - Power Clamp A 805 995 000 ProBike II Modular System STANDARD 7.165,00 A 805 995 001 ProBike II Upgrade Kit Modular System PROFESSIONAL 5.395,00 Motorcycle Clamping Device - cylindrical shafts 28 mm A 805 280 010 ProBike II Modular System ECO 4.875,00 A 805 280 000 ProBike II Modular System STANDARD 6.985,00 Motorcycle Clamping Device - cylindrical shafts 36 mm A 805 360 010 ProBike II Modular System ECO 4.875,00 A 805 360 000 ProBike II Modular System STANDARD 6.985,00 Motorcycle Clamping Device - cylindrical shafts 38 mm A 805 380 010 ProBike II Modular System ECO 4.875,00 A 805 380 000 ProBike II Modular System STANDARD 6.985,00 Motorcycle Clamping Device-cylindrical shafts 40 mm Cemb, TipTop, Hofmann Megaplan, Hunter (not Serie 9700) A 805 400 010 ProBike II Modular System ECO 4.875,00 page 28

A 805 400 000 ProBike II Modular System STANDARD 6.985,00 page 29

Motorcycle Clamping Device-cylindrical shafts 40 mm Corghi, Mondolfo, Teco, HPA ( from 2007) A 805 401 010 ProBike II Modular System ECO 4.875,00 A 805 401 000 ProBike II Modular System STANDARD 6.985,00 Motorcycle Upgrade Kit - cylindrical shafts 28-40 mm A 805 008 001 ProBike II Modular System PROFESSIONAL 5.155,00 Motorcycle Clamping Device - special connections A 805 978 000 ProBike II Modular STANDARD Facom U47/87/97 7.330,00 A 805 979 000 ProBike II Modular STANDARD Facom U300 (M12) 7.330,00 A 805 988 000 ProBike II Modular STANDARD for Cemb CB 114 / C34 7.330,00 Motorcycle Upgrade Kit - special connections A 805 978 001 ProBike II Modular PROFESSIONAL Facom U47/87/97 5.415,00 A 805 979 001 ProBike II Modular PROFESSIONAL Facom U300 (M12) 5.415,00 A 805 988 001 ProBike II Modular PROFESSIONAL for Cemb CB 114 / C34 5.415,00 Spares and accessories Motorcycle adaptors Series 802 A 802 008 010 Scooter adaptors (2 pcs.) suits ProBike motorcycle adaptor kit 520,00 B 802e008 008 Gas pressure spring series 802 (200 N) 450,00 B 802e008 090 Set of cantilevers (2 pcs.) ProBike Series 802 1.720,00 page 30

A 840e100 001 Knurled nut M10 motorcycle shafts 10 and 12 mm 60,00 A 840e140 001 Knurled nut M14 motorcycle shafts 14 mm or more 60,00 Spares and Accessories Motorcycle Adaptors Series 805 A 800e008 003 Conical chuck Facom motorcycle adaptors (old) 1.360,00 A 800e008 002 Basic motorcycle adaptor Cemb/GS/Ammco/Beissbarth (old) Ø 28 mm 998,00 A 800e999 003 Chuck for ProBike base plate, conical 1.360,00 A 803e008 003 Chuck for ProBike base plate, Ø 28 mm 998,00 A 803e008 004 Chuck for ProBike base plate, conical for Hofmann Geodyna "P" 998,00 A 803e008 006 Chuck for ProBike base plate, Ø 36 mm 998,00 A 803e008 007 Chuck for ProBike base plate, Ø 38 mm 998,00 A 803e008 008 Chuck for ProBike base plate, Ø 40 mm 998,00 A 803e008 015 Chuck for ProBike base plate, Ø 40 mm, long Version Corgi, Mondolfo, Teco, HPA from 01/07, Sice 998,00 A 803e008 009 ProBike base plate, complete 2.905,00 A 803e008 010 Set of cantilevers (2 pcs.) - complete replacement set 1.605,00 B DUGA150209 Gas pressure spring series 805 (200 N) 405,00 B DUGA 150209300 Gas pressure spring series 805 (300 N) 405,00 page 31

Spare Parts Series 802 + 805 B 850e190 001 Polyamid pressure piece (19 mm axle) 175,00 A 850 140 006 Set of centering cones 16-45 mm (14 mm axle) 415,00 A 850e140 001 Centering cone (14 mm axle) 85,00 A 860 008 007 Set of centering sleeves 15-28 mm, (14 mm axle) 1.420,00 A 860 008 008 Set of spezial centering sleeves w/o 19 mm shaft 4.425,00 A 860 140 150 Set of centering sleeves 15 mm (14 mm axle) 180,00 A 860 140 160 Set of centering sleeves 16 mm (14 mm axle) 180,00 A 860 140 170 Set of centering sleeves 17 mm (14 mm axle) 180,00 A 860 140 190 Set of centering sleeves 19 mm (14 mm axle) 180,00 A 860 140 200 Set of centering sleeves 20 mm (14 mm axle) 180,00 A 860 140 220 Set of centering sleeves 22 mm (14 mm axle) 180,00 A 860 140 250 Set of centering sleeves 25 mm (14 mm axle) 180,00 A 860 140 261 Set of centering sleeves 26 mm (14 mm axle) 180,00 A 860 140 280 Set of centering sleeves 28 mm (14 mm axle) 180,00 A 860 140 300 Set of centering sleeves 30 mm (14 mm axle) 180,00 page 32

A 860 141 005 Adaptor Kit BMW (14 mm axle) 775,00 A 860 190 007 Adaptor kit HARLEY DAVIDSON (19 mm axle) 85,00 A 860 190 009 Adaptor kit SUZUKI GSX R centering sleeves 25, 28, 32 mm (19 mm axle) 675,00 A 860 190 012 Adaptor kit Aprilia RST Futura, BMW F 650 CS (19 mm axle) 585,00 A 860 190 014 Adaptor kit Harley Davidson V Rod (19 mm axle) Ø 25,4 mm 285,00 A 860 190 220 Set of centering sleeves 22 mm (19mm axle) 285,00 A 860 190 240 Set of centering sleeves 24 mm (19mm axle) 285,00 A 860 190 250 Set of centering sleeves 25 mm (19mm axle) 285,00 A 860 190 280 Set of centering sleeves 28 mm (19mm axle) 285,00 A 860 190 300 Set of centering sleeves 30 mm (19mm axle) 285,00 A 860 190 320 Set of centering sleeves 32 mm (19mm axle) 285,00 A 860 190 350 Set of centering sleeves 35 mm (19mm axle) 285,00 A 860e120 002 Spacer, short, 12 mm inside diameter 60,00 A 860e140 006 Polyamid pressure piece Honda/BMW (14 mm axle) 585,00 A 860e140 460 Centering sleeve Piaggio X9 rear wheel 46 mm (14 mm axle) 330,00 A 860e141 005 Centering sleeve BMW-K 100 SUITS (14 mm axle) 450,00 page 33

A 860e150 002 Spacer, short, 15 mm inside diameter 60,00 A 860e180 002 Spacer, short, 18 mm inside diameter 60,00 A 860e190 004 Adaptor Ducati, Triumpf (19 mm axle) 450,00 A 860e190 008 Adaptor HONDA NTV 650 + Goldwing 1800 (19 mm axle) 550,00 A 860e190 011 Centering sleeve MV Agusta Backwheel (19 mm axle) 510,00 A 860e190 012 Centering sleeve Aprilia / BMW / Yamaha (19 mm axle) 475,00 A 860e200 002 Spacer, short, 20 mm inside diameter 60,00 A 860e250 002 Spacer, short, 25 mm inside diameter 60,00 A 860e280 002 Spacer, short, 28 mm inside diameter 60,00 A 990e008 001 Face spanner for knurled nuts and the like 85,00 Clamping Device Quick Fix for Series 802 / 805 A 890 140 001 Quick Fix for 14 mm shaft 985,00 A 890 190 001 Quick Fix for 19 mm shaft 985,00 page 34

Centering Shafts for MWCD Series 805 280 000-805 400 000 A 870 010 100 10 mm centering shaft for MWCD, gripping length 193 mm 1.149,00 A 870 010 120 12 mm centering shaft for MWCD, gripping length 193 mm 1.149,00 A 870 010 140 14 mm centering shaft for MWCD, gripping length 233 mm 1.149,00 A 870 010 141 14 mm centering shaft for MWCD, special gripping length 318 mm 1.720,00 A 870 010 190 19 mm centering shaft for MWCD, gripping length 270 mm 1.149,00 A 870 010 191 19 mm centering shaft for MWCD, gripping length 365 mm 1.890,00 Centering Shafts MWCD Hofmann Power Clamp Series 805 A 870 995 140 14 mm centering shaft for MWCD Power Clamp, gripping length 253 1.720,00 A 870 995 190 19 mm centering shaft for MWCD Power Clamp, gripping length 270 1.720,00 Centering Shafts MWCD - Conical Series 805 A 870 997 100 10 mm centering shaft for MWCD conical shaft, gripping length 177 m 1.149,00 A 870 997 120 12 mm centering shaft for MWCD conical shaft, gripping length 177 m 1.149,00 A 870 997 140 14 mm centering shaft for MWCD conical shaft, gripping length 233 m 1.149,00 A 870 997 141 14 mm centering shaft for MWCD conical shaft, special gripping length 302 mm 1.720,00 A 870 997 190 19 mm centering shaft for MWCD conical shaft, gripping length 270 m 1.149,00 A 870 997 191 19 mm centering shaft for MWCD conical shaft, gripping length 365 m 1.890,00 page 35

Centering Shafts for MWCD Series 805 768 000 A 870 007 140 14 mm centering shaft for MWCD cylindrical shaft, gripping length 233 mm 1.149,00 A 870 007 141 14 mm centering shaft for MWCD cylindrical shaft, spec. gripping length 318 mm 1.720,00 A 870 007 190 A 870 587 140 19 mm centering shaft for MWCD cylindrical shaft, gripping length 233 mm Centering Shafts MWCD - various - only Series 802 14 mm centering shaft for MWCD Cemb C20/22, gripping length 255 mm 1.149,00 1.149,00 A 870 587 190 19 mm centering shaft for MWCD Cemb C20/22, gripping length 255 mm 1.149,00 A 870 657 140 14 mm centering shaft for MWCD Mondolfo MT 500-8000, gripping length 255 mm 1.149,00 A 870 657 190 19 mm centering shaft for MWCD Mondolfo MT 500-8000, gripping length 255 mm 1.149,00 A 870 907 140 14 mm centering shaft for MWCD Corghi/Faip/Sice, gripping length 253 mm 1.149,00 A 870 907 190 19 mm centering shaft for MWCD Corghi/Faip/Sice, gripping length 253 mm 1.149,00 A 870 954 140 14 mm centering shaft for MotSV Balco 9000 / 9450 (M10x1), gripping length 255 mm 1.149,00 A 870 954 190 19 mm centering shaft for MotSV Balco 9000 / 9450 (M10x1), gripping length 255 mm 1.149,00 A 870 957 140 14 mm centering shaft for MWCD Balco, gripping length 255 mm 1.149,00 A 870 957 190 19 mm centering shaft for MWCD Balco, gripping length 255 mm 1.149,00 A 870 978 140 14 mm centering shaft for MWCD Facom U47 / U87 / U97, gripping length 233 mm 1.149,00 A 870 978 190 19 mm centering shaft for MWCD Facom U47 / U87 / U97, gripping length 233 mm 1.149,00 page 36

A 870 979 140 14 mm centering shaft for MWCD Facom U300, gripping length 232 mm, M 12 1.149,00 A 870 979 190 19 mm centering shaft for MWCD Facom U300, gripping length 232 mm, M 12 1.149,00 A 870 987 140 14 mm centering shaft for MWCD Cemb/Ammco/GS, gripping length 233 mm 1.149,00 A 870 987 190 19 mm centering shaft for MWCD Cemb/Ammco/GS, gripping length 260 mm General Accessories 1.149,00 A 900 008 005 Rim width caliper 255,00 A 900 008 006 Wheel weight plier 235,00 A 900 008 027 Run-out measuring device with support 3.865,00 A 900 008 030 Balancing model 1.065,00 A 900 008 040 Special weight application tool 415,00 C 900 008 074 Plug gauge 28/36mm 835,00 C 900 008 075 Plug gauge 38/40mm 835,00 C 900 008 076 Set of plug gauges and measuring forks 3.835,00 C 900 008 103 Shaft gauge (to check the diameter) 28/36mm 1.135,00 C 900 008 104 Shaft gauge (to check the diameter) 38/40mm 1.135,00 A 900 008 106 2 piece wheel weight depressing tool 1.855,00 page 37

A 900 008 116 Knee-Pad Set of 4 pcs. 668,00 page 38

A 900 008 127 Flange Plate Storage Facility Trolley with perforated plate and 40 mm Ø pins 1.125,00 A 900 008 128 Flange Plate Storage Facility Trolley with tray and 40 mm Ø pins 1.125,00 A 900 008 133 Flange Plate Storage Facility Trolley with perforated plate and 28 mm Ø pins 1.125,00 A 900 008 134 Flange Plate Storage Facility Trolley with tray and 28 mm Ø pins 1.125,00 A 900 008 135 Wall Board "PKW" 835,00 A 900 008 136 Wall Board "Off Road" 835,00 A 900 008 142 Wall Board ProBike II "Standard" 835,00 A 900 008 143 Wall Board ProBike II "Profi" 835,00 A 900 008 151 Wall Board QuickPlate 835,00 A 900 008 195 Wall Board FixPlate 835,00 A 900 008 209 Wall Board QuickPlate PN 835,00 A 900 008 148 Testing Device for Wheel Balancers 13.605,00 A 900e008 011 Dial gauge 1mm graduation incl. scanning small wheel 2.575,00 A 900e008 089 Scraper to remove stick on alloy weights 105,00 N 900e008 239 Wall Board Stand (wall boards not included) 2.049,00 Lifting Device page 39

B 916 000 014 Airgo Lift, wheel lifting device for balancers 9.200,00 page 40

2026 © DocPlayer.net Privacy Policy | Terms of Service | Feedback  | Do Not Sell My Personal Information