Rabat kode Varenr Beskrivelse Pris DKK. Mid centering device and Basic centering device. Spring-less Mid centering device

Transcription

1 Chuck / Mid centering device / Adaptors Sets Chuck A Conical chuck Hofmann 1.290,00 A Chuck Corghi/Faip/Sice 1.290,00 Mid centering device and Basic centering device A 100e Basic centering device conical Tr40x3 covered spring, 200 mm usable length (Beissbarth / Sicam) 3.050,00 A 100e Basic centering device conical Tr40x4 covered spring, 240 mm usable length 3.050,00 A 100e Basic centering device conical Tr40x3 covered spring, 240 mm usable length 3.050,00 A 100e Closed basic centering device Schenck, Tr 40x3 188 mm usable length, covered spring, red mark 3.050,00 A Mid centering device Tr40x3, 3 cones, ProGrip, 200 mm usable length 4.935,00 A Mid centering device Tr40x3, 3 cones, ProGrip, 240 mm usable length 5.160,00 A A Mid centering device Tr 40x3, 3 cones, ProGrip, 181 mm usable length, FMC, Cemb (old) Spring-less Mid centering device Basic centering conical DuoMatic Tr40x3, ProGrip, clamping hood ProGrip Kit and Adaptor Sets 5.160, ,00 A ProGrip kit Tr 28,55x3 Includes / ,00 A ProGrip kit Tr 28.55x3 Includes / ,00 A ProGrip kit Tr 28,55x8,46 Includes / ,00 Side 1

2 A ProGrip kit Tr 30x3 Includes / ,00 A ProGrip kit Tr 36x3 Includes / ,00 A ProGrip kit Tr 36x3 with turning handles Includes / ,00 A ProGrip kit Tr 38x3 Includes / ,00 A ProGrip kit Tr 38x3 with turning handles Includes / ,00 A ProGrip kit Tr40x3 Includes ProGrip and ,00 A ProGrip kit Tr40x4 Includes ProGrip and ,00 A ProGrip kit Tr40x4 with turning handles 1.150,00 A ProGrip kit Tr40x4 Includes / ,00 A ProGrip Kit Tr 40x8,46 Includes / ,00 A Adaptor set Cemb/TipTop/Hofmann, shaft, pressure piece, pr. ring Ø 36 mm 3.375,00 A Adaptor set Cemb / Rav / Teco Tr36x3 Shaft, 3 cones, ProGrip etc ,00 A Adaptor set Cemb / Rav / Teco, 3 cones, ProGrip Ø36 mm 1.770,00 A Adaptor set Cemb/TipTop/Hofmann, shaft, pressure piece, pr. ring Ø 40 mm 3.375,00 A Adaptor set Cemb & TipTop Tr40x4 Shaft, 3 cones, ProGrip Kit 2.750,00 Side 2

3 A Adaptor set Cemb & TipTop 40 mm, 3 cones, ProGrip Ø40 mm 1.770,00 A Adaptor set Fasep 3 cones, ProGrip Kit,Shaft 2.505,00 A Adaptor set Mondolfo BM Tr28,55x3 Shaft, 3 cones, ProGrip Kit 2.750,00 A Adapter set HAWEKA BM Tr40x3 Shaft 3 Cones, ProGrip Kit 2.750,00 A Adaptor set Corghi / Sice / Faip Tr38x3. Shaft 3 Cones, ProGrip Kit 2.750,00 A Adapter-Set, Mondolfo, Tr40x3 Shaft, ProGrip Kit, 3 Cones, clamping hood, Corghi, HPA, Teco 2.950,00 A Adaptor set Balco/Haweka Tr40x3 shaft, ProGrip Kit, 3 cones 2.750,00 A Adaptor set Balco/Snap-On/Sun 28,55x3 mm shaft ProGrip Kit, turning handles 3 cones 2.750,00 A Adaptor set Balco/JBC serie 9000, 40x3 Shaft, ProGrip Kit, 3 cones Quick nuts ProGrips / Accessories Quick nuts ProGrip (Version: steel) 2.750,00 A ProGrip Tr 40 x 3 mm 1.925,00 A ProGrip Tr 40 x 4 mm 1.925,00 A ProGrip Tr 40 x 8.46 mm 1.925,00 A ProGrip Tr 46 x 6 mm 2.750,00 Side 3

4 ProGrip quick nuts A ProGrip Tr 28,55 x 3 mm 960,00 A ProGrip Tr 28,55 x 3 mm, with turning Handles 960,00 A ProGrip Tr 28,55 x 3,5 mm 960,00 A ProGrip Tr 28,55 x 3,5 mm, with turning handles 960,00 A ProGrip Tr 28,55 x 8,46 mm 960,00 A ProGrip Tr 36 x 3 mm 960,00 A ProGrip Tr 36 x 3 mm, with turning handles 960,00 A ProGrip Tr 38 x 3 mm 960,00 A ProGrip Tr 38 x 3 mm, with turning handles 960,00 A ProGrip Tr 40 x 3 mm 960,00 A ProGrip Tr 40 x 3 mm, with turning handles 960,00 A ProGrip Tr 40 x 4 mm 960,00 A ProGrip Tr 40 x 4 mm, with turning handles 960,00 A ProGrip Tr 40 x 4 mm original Hofmann 960,00 A ProGrip Tr 40 x 4 mm with turning handles, original Hofmann 960,00 Side 4

5 A ProGrip Tr 40 x 8,46 mm 960,00 Spare Parts for Series ProGrip B 140e Repair kit 36 x 3 mm (Version: steel) 746,00 B 140e Repair kit Tr 38 x 3 mm (Version: steel) 746,00 B 140e Repair kit Tr 40 x 3 mm (Version: steel) 746,00 B 140e Repair kit Tr 40 x 4 mm (Version: steel) 746,00 B 141e Repair kit Tr 28,55 x 3 mm ProGrip 746,00 B 141e Repair kit Tr 28,55 x 3.5 ProGrip original Balco 746,00 B 141e Repair kit Tr 36 x 3 mm ProGrip 746,00 B 141e Repair kit Tr 38 x 3 mm ProGrip 746,00 B 141e Repair kit Tr 40 x 3 mm ProGrip 746,00 B 141e Repair kit Tr 40 x 4 mm ProGrip 746,00 B 141e Repair kit Tr 40x8,46 mm ProGrip 899,00 Cones / Centering Rings / Conical Rings Pressure Pieces Enter diameter of the balancer shaft as 4th and 5th number (28, 36, 38, 40) A 150 xx0 008 Centering cone 42-64,5 mm 386,00 A 150 xx0 009 Centering cone 54-79,5 mm 346,00 Side 5

6 A 150 xx0 010 Centering cone 74-99,5 mm 404,00 A 150 xx0 011 Centering cone mm 426,00 A 150 xx0 012 Centering cone ,5 mm 453,00 A 150 xx cone set ,5 mm (011 / 012) 701,00 A 150 xx cone set 42-99,5 mm (008 / 009 / 010) 891,00 A 150 xx0 022 Centering cone 168,5-194,5 mm 1.777,00 A 150 xx0 024 Centering cone mm / only with Plastic Spacer disc 190 xx ,00 A 150 xx0 025 Centering cone for trucks 277,4-283 mm 1.612,00 A 150 xx0 026 Set of light truck cones mm (043 / 049 / 190 xx0 018) 2.301,00 A 150 xx0 043 Centering cone mm 1.268,00 A 150 xx0 047 Centering cone mm 293,00 A 150 xx0 048 Centering cone mm 389,00 A 150 xx0 049 Centering cone mm 701,00 A 150 xx0 072 Centering Cone ,5mm Ford Transit from ,00 A 150 xx0 074 Centering Cone ,5 mm Iveco from ,00 Side 6

7 A 150 xx Centering cone set ,5 mm (008 / 009 / 012) 990,00 A 150 xx0 091 Centering Cone mm (043 / 190 xx0 018) 1.765,00 A Conical ring "A" 56,3-58,2 mm Hofmann 653,00 A Conical ring "B" 63,1-65,3 mm Hofmann 653,00 A Conical ring "C" 71,3-74,2 mm Hofmann 653,00 A Conical ring "D" 58,3-60,5 mm Hofmann 653,00 A Conical ring "E" 65,8-67,7mm Hofmann 653,00 A Conical ring "F" 52-56,2 mm Hofmann 653,00 A Centering cone mm 46 mm inside diameter 701,00 A Centering cone mm 46 mm inside diameter 346,00 A Centering cone mm 46 mm inside diameter 453,00 A Centering cone mm, truck, 46 mm inside diameter 1.268,00 A Centering cone 277,4-283 mm, truck, 46 mm inside diameter 1.613,00 A Centering cone mm 46 mm inside diameter 1.328,00 A Centering cone mm 46 mm inside diameter 701,00 Side 7

8 A Centering cone mm ( 043 / ) 1.765,00 Side 8

9 Centering sleeve Enter diameter of the balancer shaft as 4th and 5th number (28, 36, 38, 40) A 160 xx0 004 Centering sleeve / 63.5 mm 653,00 A 160 xx0 006 Centering sleeve 58 / 65 mm 653,00 A 160 xx0 008 Centering sleeve OPEL 56.5 / 65 mm 653,00 A 160 xx0 009 Centering sleeve Porsche ,00 A 160 xx0 011 Centering sleeve 55 / 60 / 65 mm 653,00 A 160 xx0 012 Centering sleeve 54 / 60 / 64 mm 653,00 A 160 xx0 027 Centering sleeve Rolls Royce (-`95) 72,5 mm 653,00 A 160 xx0 028 Centering sleeve Rolls Royce 117,55 mm (old) 653,00 A 160 xx0 029 Centering sleeve OPEL 57 / 70,2 mm 653,00 A 160 xx0 030 Centering sleeve Toyota 110,05 mm 1.133,00 A 160 xx0 031 Centering sleeve BMW 57 / 72,5 / 74 mm 653,00 A 160 xx0 032 Centering sleeve 56 / 66 / 71,5 mm 653,00 A 160 xx0 051 Centering sleeve Mercedes 66,7 / mm 653,00 A 160 xx0 053 Centering sleeve Toyota / Nissan Off Road 106 / 110 mm 1.133,00 Side 9

10 Wire Wheel Kits B Centering kit for spoke wheels with central locker, 40 mm 3.100,00 B 162e Cone for Austin Martin DB 6, Jaguar, Triumph, Austin Healy 870,00 B 162e Centering ring, conical for Jaguar, Triumph, Austin Healy 983,00 B 162e Centering ring, conical for Austin Martin DB 6, old Jaguar 983,00 Pneumatic Handles A Pneumatic handle Hofmann, JBC, Sicam P Power Clamp for clamping hood 805,00 A Pneumatic handle Cemb P for clamping hood (36 mm) 805,00 A Pneumatic handle Cemb & Tip Top P, Ravaglioli P for clamping hood (40 mm) DuoExpert Enter diameter of the balancer shaft as 4th and 5th number (28, 36, 38, 40) 805,00 A 164 xx0 500 DuoExpert System. 2 collets in a case 54-75mm ,00 A 164 xx0 501 DuoExpert collet mm clamping range 2.915,00 A 164 xx0 502 DuoExpert collet mm clamping range 2.915,00 A 164 xx0 505 DuoExpert collet mm clamping range 2.915,00 A 164 xx0 507 DuoExpert collet mm clamping range 2.915,00 A 164 xx0 509 DuoExpert collet mm clamping range 2.915,00 Side 10

11 Spare parts for DuoExpert B 164e Rubber ring DuoExpert 135,00 B 164e Basic collet DuoExpert 40 mm inside diameter 1.645,00 B 164e Basic collet DuoExpert 38 mm inside diameter 1.645,00 B 164e Basic collet DuoExpert 36 mm inside diameter 1.645,00 B 164e Basic collet DuoExpert 35 mm inside diameter 1.645,00 B 164e Basic collet DuoExpert 30 mm inside diameter 1.645,00 B 164e Basic collet DuoExpert mm inside diameter 1.645,00 B 164e Synchronizing ring DuoExpert 353,00 B 164e Expanding segment DuoExpert collet mm 353,00 B 164e Expanding segment DuoExpert collet mm 353,00 Threaded Shafts A Threaded shaft Tr 36x3mm Cemb / Rav / Teco 200mm extra long with screw M ,00 A Threaded shaft Tr 40x4mm Cemb & TipTop 190 mm long with screw M ,00 A Threaded shaft 38x3mm Fasep 180 mm Long, connection M22 x 1, ,00 A Threaded shaft Tr28.55x3 mm fits Mondolfo MT , 200 mm long, connection M ,00 Side 11

12 A Threaded shaft Tr40x3 mm Mondolfo MT with screw M ,00 A Threaded shaft Tr40x3 mm Mondolfo (truck) Far East with screw M ,00 A Threaded shaft Tr38x3 mm Corghi/Faip/Sice 215 mm long with screw M15 x 1, ,00 A Threaded shaft Tr 40x3 Mondolfo 181 mm long with screw M15 x 1, ,00 A Threaded shaft Tr 40x3 mm HAWEKA/BM 22/44/55/550 with screw M ,00 A Threaded shaft fits Coats. Thread 28,55 x3 mm. 170mm long Connection 5/8" - 11 UNC 1.155,00 A Threaded shaft Tr40x3 mm Coats 850/950/1050 connenction 5/8"-11 UNC 1.155,00 A Threaded shaft Tr28,55x3 mm Balco/Sun/Snap-on, extra long version, 200 mm, connection 3/8"-24 UNF 1.155,00 A Threaded shaft Tr28.55x3.5, John Bean, 186 mm, connection 3/8"-24 UNF 1.155,00 A Threaded shaft Tr40x3 mm Balco with screw 3/8"-24 UNF 1.155,00 A Threaded shaft Tr40x4 mm Snap On/JBC USA with screw 3/8"-24 UNF 1.155,00 A Threaded shaft Tr40x3 Balco/JBC line mm long connection M33 x ,00 A Threaded shaft Tr40x3, 260 mm Cemb, with screw M ,00 A 170e Screw M12 for 40 mm Threaded shaft MT ,00 A 170e Screw for Threaded shaft 3/8"-24UNF Balco thread 40x3 mm ( ) 113,00 Side 12

13 Clamping Hoods / Spacer Discs & Springs Enter diameter of the balancer shaft as 4th and 5th number (28, 36, 38, 40) A Clamping hood fits ALL Haweka wing nuts 233,00 A Rubber cap for clamping hood ,00 A Large diameter (220mm) clamping hood for alloy rims. Suits ALL Haweka wing nuts 465,00 A Large diameter (220mm) clamping hood for alloy rims. Suits CEMB orig. wing nuts 675,00 A Pressure ring, fits ALL Haweka wing nuts 54,00 A Large diameter (220mm) clamping hood for alloy rims. Suits Hofmann orig. wing nuts 675,00 A Large diameter (220mm) clamping hood for alloy rims. Suits Corghi orig. wing nuts 675,00 A Spring, conical for open MCD 54,00 A Special pressure piece for Porsche 425,00 A Spring, conical for open MCD, DuoExpert 67,00 A Steel spacer Mondolfo 1.530,00 Side 13

14 A Steel spacer Corghi 1.530,00 A Steel spacer Balco 1.530,00 A Steel spacer Cemb / Haweka 1.530,00 A 190e Distance ring with magnets for Off-Road cone from the back incl. Pins 1.365,00 A 190 xx0 010 (Polyamid) Spacer DuoExpert 90,00 A 190 xx0 018 Aluminium Spacer disc 945,00 A 190 xx0 042 Polyamid Spacer disc / for Centering cone 150 xx ,00 A 190exx0 045 Polyamid spacer (donut) for Off-Road 105,00 Flange Plates WORLD KIT Flange Plates WORLD KIT (Ø 11 mm) Enter diameter of the balancer shaft as 7th and 8th number (28, 36, 38, 40) A xx5 Set of 4 flange adaptors, professional set with 5 sets of studs, colourcoded, 2 wall boards, wallchart, CD-Rom and Off Road Spacer 9.800,00 A xx9 A A xx9 A xx5 A xx9 Off Road Set with 2 flange plate adaptors, colour-coded, 2 sets of studs, incl. 1 wall board, wallchart, CD Rom and Off Road Spacer Set of 4 flange plate adaptors, professional set, colour coded with 5 sets of studs, 2 wall boards, wallchart, CD-Rom and Off Road Spacer for Hofmann "Power Clamp" Off Road Set with 2 flange plate adaptors, colour-coded, 2 sets of studs, incl. 1 wall board, wallchart, CD Rom and Off Road Spacer,suits Hofmann "Power Clamp" Set of 4 flange plate adaptors, colour-coded with 5 sets of studs, 2 wall boards, wall chart, CD Rom and Off Road Spacer for Cemb/Tip Top (36 or 40 mm) Off Road Set with 2 flange plate adaptors, colour-coded, 2 sets of studs, incl. 1 wall board, wall chart, CD-Rom and Off Road Spacer for Cemb/Tip Top (36 or 40 mm) 6.200, , , , ,00 Side 14

15 Flange Plates / Studs / Special Sets Flange Plates Series WORLD KIT (Ø 11 mm) w/o studs A 241e801 xx9 Flange Plate Adaptor (TSP No. 1), colour-coded, without studs 4x95,25/ 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x ,00 A 251e701 xx9 A 251e901 xx9 A 231e901 xx9 A 243e Flange Plate Adaptor (TSP No. 2), colour-coded, without studs 5x98/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154,95 Flange Plate adaptor (TSP No. 3) Off Road, colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165,1 Flange Plate Adaptor (TSP No. 4) Off Road, colour-coded, without studs 3x98/ 3x112/ 3x114,3/ 3x115/ 3x127/ 3x130/ 6x135/ 6x139,7/ 4x165,1 Flange Plates Series WORLD KIT (Ø 11 mm) w/o studs Hoffmann / JBC / Sicam P Flange Plate Adaptor (TSP No. 1), colour-coded, without studs 4x95,25/ 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x , , , ,00 A 253e Flange Plate Adaptor (TSP No. 2), colour-coded, without studs 5x98/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154, ,00 A 253e Flange Plate adaptor (TSP No. 3), colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165, ,00 A 233e A 245e Flange Plate Adaptor (TSP No. 4), colour-coded, without studs 3x98/ 3x112/ 3x114,3/ 3x115/ 3x127/ 3x130/ 6x135/ 6x139,7/ 4x165,1 Flange Plates Series WORLD KIT (Ø 11 mm) w/o studs Tip Top / Cemb Ø 40 Flange Plate Adaptor (TSP No. 1), colour-coded, without studs 4x95,25/ 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x , ,00 A 255e Flange Plate Adaptor (TSP No. 2), colour-coded, without studs 5x98/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154, ,00 A 255e Flange Plate adaptor (TSP No. 3), colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165, ,00 A 235e Flange Plate Adaptor (TSP No. 4), colour-coded, without studs 3x98/ 3x112/ 3x114,3/ 3x115/ 3x127/ 3x130/ 6x135/ 6x139,7/ 4x165, ,00 Side 15

16 Studs for Flange Plates WORLD KIT (Ø 11 mm) A Plug-in Stud "I" 100 mm long, Ø 19 mm 189,00 A Plug-In Stud "II" 80 mm long, short taper, Ø 24,5 mm 189,00 A Plug-In Stud "III" 90 mm long, rounded head, Ø 24,5 mm 189,00 A Plug-In Stud "IV" 80 mm long, Range/Land Rover, Ø 34 mm 220,00 A Plug-In Stud "V" 100mm long, short taper, Ø 22,5 mm 189,00 Special Studs Series WORLD KIT (Ø 11 mm) A Plug-In Stud "VI", 120 mm long, short taper, Ø 22,5 mm 189,00 A Plug-In Stud, 90 mm long, Ø 24,4 mm 189,00 A Plug-In Stud, spring-loaded, 100 mm long, short taper, Ø 24,5 mm 240,00 A O-rings for plug-in-stud (Ø 11 mm) (set of 5 pcs.) 39,00 Flange Plates STANDARD KIT (Ø 12 mm) Flange Plates for Fixed Studs (w/o studs) (Standard Stud ) Enter diameter of the balancer shaft as 7th and 8th number (28, 36, 38, 40) A 240e101 xx2 Flange plate adaptor 4x100, without Studs 835,00 A 240e102 xx0 Flange plate adaptor 4x108, without Studs 835,00 A 240e103 xx0 Flange plate adaptor 4x130, without Studs 835,00 A 240e104 xx0 Flange plate adaptor 4x114.3, without Studs 835,00 A 240e107 xx0 Flange plate adaptor 4x98, without Studs 835,00 Side 16

17 A 240e108 xx0 Flange plate adaptor 4x101.6, without Studs 835,00 A 240e109 xx0 Flange plate adaptor 4x140, without Studs 835,00 A 250e101 xx0 Flange plate adaptor 5x112, without Studs 835,00 A 250e102 xx0 Flange plate adaptor 5x120, without Studs 835,00 A 250e104 xx0 Flange plate adaptor 5x108, without Studs 835,00 A 250e105 xx0 Flange plate adaptor 5x130, without Studs 835,00 A 250e107 xx0 Flange plate adaptor 5x114.3, without Studs 835,00 A 250e108 xx0 Flange plate adaptor 5x100, without Studs 835,00 A 250e109 xx0 Flange plate adaptor 5x98, without Studs 835,00 A 250e120 xx0 Flange plate adaptor 5x110, without Studs 835,00 A 250e121 xx0 Flange plate adaptor 5x135, without Studs 835,00 A 250e122 xx0 Flange plate adaptor 5x115 Opel Sintra, without Studs 835,00 A 250e129 xx0 Flange plate adaptor 5x150, without Studs 835,00 A 260e101 xx1 Flange plate adaptor 6x139.7, without Studs 835,00 A 260e112 xx0 Flange plate adaptor 6x130 / 6x120, without Studs, Mercedes Benz Sprinter from ,00 Side 17

18 Flange Plates Series Light Truck (Ø 12 mm) w/o fixed studs A 211e401 xx2 Flange plate adaptor 5x170 / 190 / 6x ,00 A 221e201 xx0 Flange plate adaptor 5x160 / 6x ,00 A 231e403 xx2 Flange plate adaptor 5x203.2/ 205/ x184.15/ ,00 A 260e103 xx1 Flange plate adaptor 5/6 x 205 / 6 x ,00 Fixed Studs for Flange Plates (Ø 12 mm) A Fixed stud, short taper 80 mm long, Ø 24,5 mm (recommended standard stud) 169,00 A Fixed stud, long taper 80 mm long, Ø 25,4 mm 169,00 A Fixed stud 35 mm long, truck, (Japan ), Ø 39,5 mm 169,00 Special Studs for Flange Plates with Fixed Studs (Ø 12 mm) A Fixed stud, rounded head 80 mm long, Ø 24,5 mm 189,00 A Fixed stud, rounded head 90 mm long, Porsche, Ø 24,5 mm 189,00 A Fixed stud, long taper 90 mm long, Ø 24,5 mm 189,00 A Fixed stud, rounded head 100 mm long, Porsche, Ø 24,5 mm 189,00 Side 18

19 Single Flange Plates w/o studs Standard Set - Car Manufacturers - A 201e402 xx0 Flange plate adaptor 3x112/ 5x112/ 130/ 140 Mercedes Benz (recomm. stud ) 1.155,00 A 211e201 xx0 Flange plate adaptor 4x100/ 5x120, BMW (spring-loaded studs needed ) 1.155,00 A 251e303 xx0 A 231e505 xx3 Flange plate adaptor 5x98/ 108/118 Peugeot/Citroen/Renault (recomm. stud ) Single Flange Plates w/o studs Standard Set (Ø 12mm ) Flange plate adaptor Off Road 5x 114,3-5/6x 139,7-4/5x 165,1 (without Studs) 1.155, ,00 A 241e603 xx0 Flange plate adaptor 4 x 98 / 100 / 108 / 110 / / 120 (without Studs) 1.155,00 A 251e603 xx0 Flange plate adaptor 5 x 100 / 108 / 112 / 114,3 / 120 / 130 (without Studs) 1.155,00 A 251e608 xx0 Flange plate adaptor 5 x 98 / 100 / 108 / 112 / 120 / 130 (without Studs) 1.155,00 A 251e611 xx0 Flange plate adaptor 5 x 100 / 108 / 110 / 112 / 120 / 130 (without Studs) Plug-in Studs for Flange Plates (Ø 12 mm) 1.155,00 A Plug-in stud 80 mm long, short taper, Ø 24,5 mm 184,00 A Plug-in stud 80 mm long, long taper, Ø 24,5 mm 184,00 A Plug-in stud, Porsche 90 mm long 184,00 A Plug-in stud 90 mm long, long taper, Ø 24,5 mm 184,00 A Plug-in stud 100 mm long, long taper, Ø 22,5 mm 184,00 A Plug-in stud 100 mm long, spring-loaded, short taper, Ø 24,5 mm 270,00 Side 19

20 A O-rings for plug-in-stud (Ø 12 mm) (set of 5 pcs.) 25,00 Special Studs for Flange Plates (Ø 12 mm) A Plug-in stud 120 mm long, rounded head, Porsche, Ø 24,5 mm 180,00 A Plug-in stud 120 mm long, long taper, Ø 24,5 mm 180,00 A Plug-in stud 100 mm long, rounded head, Porsche, Ø 24,5 mm 180,00 A Plug-in stud 100 mm long, long taper, Ø 24,5 mm 180,00 Flange Plate QuickPlate / Heads QuickPlates Enter diameter of the balancer shaft as 7th and 8th number (28, 36, 38, 40) B xx5 Set of QuickPlates (4-, 5 and 6-holes-plate) incl. wall board ,00 B xx0 QuickPlate 4-holes with standard heads (4 pcs. 273e ) 4.700,00 B xx0 QuickPlate 5-holes with standard heads (5 pcs. 273e pcs. 273e ) 5.600,00 B xx0 QuickPlate 6-holes with standard heads (6 pcs. 273e ) 6.200,00 QuickPlates PN Hofmann / JBC / Sicam P (for Pneumatic Wheel-Balancing-Machines) B Set of QuickPlates Hofmann (4-, 5-,6-holes-plate with pneumatic handle) incl. Wall board ,00 B QuickPlate 4-holes for Hofmann with standard heads (4 pcs no. 273e ) and pneumatic handle 4.900,00 B QuickPlate 5-holes for Hofmann with standard heads (5 pcs 273e pcs 273e ) and pneumatic handle 5.640,00 B QuickPlate 6-holes for Hofmann with standard heads (6 pcs no. 273e ) and pneumatic handle 6.400,00 Side 20

21 QuickPlates PN Hofmann / JBC / Sicam P (for Pneumatic Wheel-Balancing-Machines) B Set of QuickPlates Cemb Ø 40 mm (4-, 5-,6-holes-plate with pneumatic handle) incl. Wall board ,00 B Set of QuickPlates Cemb Ø 36 mm (4-, 5-,6-holes-plate with pneumatic handle) incl. Wall board ,00 B QuickPlate 4-holes for Cemb Ø 36 mm with standard heads (4 pcs no. 273e ) and pneumatic handle 5.600,00 B QuickPlate 4-holes for Cemb Ø 40 mm with standard heads (4 pcs no. 273e ) and pneumatic handle 5.600,00 B QuickPlate 5-holes for Cemb Ø 36 mm with standard heads (5 pcs 273e pcs 273e ) and pneumatic handle 6.200,00 B QuickPlate 5-holes for Cemb Ø 40 mm with standard heads (5 pcs 273e pcs 273e ) and pneumatic handle 6.200,00 B QuickPlate 6-holes for Cemb Ø 36 mm with standard heads (6 pcs no. 273e ) and pneumatic handle 6.400,00 B A QuickPlate 6-holes for Cemb Ø 40 mm with standard heads (6 pcs no. 273e ) and pneumatic handle FixPlates Set of 4 FixPlate, colour-coded, with 10 studs, 25 heads for studs, 1 wall boards, wallchart 6.400, ,00 A FixPlate (No. 1), colour-coded, without studs 4x98/ 4x100/ 4x101,6/ 4x108/ 4x114,3/ 7x150/ 4x ,00 A FixPlate (No. 2), colour-coded, without studs 5x98/ 5x108/ 5x110/ 5x115/ 5x120,65/ 5x135/ 5x154, ,00 A FixPlate ( No. 3) Off Road, colour-coded, without studs 5x100/ 5x112/ 5x114,3/ 5x120/ 5x127/ 5x130/ 5x139,7/ 5x150/ 5x165, ,00 A FixPlate (No. 4) Off Road, colour-coded, without studs 3x98/ 3x112/ 3x114,3/ 3x115/ 3x127/ 3x130/ 6x135/ 6x139,7/ 4x165,1 Stud for Flange Plate FixPlate 1.945,00 A Plug-in stud for FixPlate without head 220,00 Side 21

22 Heads B 273e Head, short taper, length head 28 mm, Ø 24,5 mm 89,00 B 273e Head, short taper, length head 38 mm, Ø 24,5 mm 89,00 B 273e Head, rounded, length head 38 mm, Ø 24,5 mm 89,00 B 273e Head, long taper, length head 48 mm, Ø 22,5 mm 89,00 Special Heads B 273e Head, short taper, length head 48 mm, Ø 24,5 mm 89,00 B 273e Head, rounded, length head 48 mm, Ø 24,5 mm 89,00 B 273e Head, Range-, Landrover, length head 28 mm, Ø 34 mm 89,00 B 273e Head, long taper, length head 55,6 mm, Ø 19,0 mm 89,00 B 273e Head, long taper, length head 58 mm, Ø 22,5 mm 89,00 Special Adaptor Kits / Reducing Sleeves Special Adaptor Kits A Centering kit Porsche, inside diameter 28 mm 3.370,00 A Centering kit Porsche, inside diameter 40 mm 3.370,00 A Professional 4 X 4 kit. 5/6 X & 5 X 165.1, Ø 28 mm 4.200,00 A Professional 4 X 4 Kit. 5/6 X & 5 X 165.1, Ø 40 mm 4.200,00 A Centering kit for Quad-rims 1.845,00 Side 22

23 A LLkw Adapter for VW Crafter / MB Sprinter Ø ,00 Reducing Sleeves A Reducing sleeve 40 mm to 28 mm 50 mm long 195,00 A Reducing sleeve 40 mm to 30 mm 50 mm long 195,00 A Reducing sleeve 40 mm to 35 mm 50 mm long 195,00 A Reducing sleeve 40 mm to 36 mm 50 mm long 195,00 A Reducing sleeve 40 mm to 38 mm 50 mm long 195,00 Universal Clamping Devices UniEurop Universal Adaptors A UniEurop with standard nuts, 5 bolts M ,00 A Threaded sliding stud M10 x 1,25 55 mm long, for UniEurop 236,00 Centering Rings Series 300 and UniLug 400 A Centering ring 58 mm fits HAWEKA universal adaptors 355,00 A Centering ring 60 mm fits HAWEKA universal adaptors 355,00 A Centering ring 65 mm fits HAWEKA universal adaptors 355,00 A Centering ring 55 mm fits HAWEKA universal adaptors 355,00 A Centering ring 56 mm fits HAWEKA universal adaptors 355,00 Side 23

24 UniLug / Series UniLug Series 405 (incl. 3 Centering rings, 58,60, 65 mm) A UniLug without clamping chuck e.g. for machines with cylindrical shafts 4.935,00 A UniLug for machines with 28,56 mm shaft, Mondolfo, Balco, Snap On, US-Market 4.935,00 A UniLug for machines with 36 mm shaft, Cemb, Ravaglioli 4.935,00 A UniLug for machines with 38 mm shaft, Corghi, Faip, Sice, HPA incl. Spacer 405e ,00 A UniLug for machines with 38 mm shaft, Fasep 4.935,00 A UniLug for machines with 40 mm shaft, TipTop, Cemb, Ravaglioli, US- Market, Mondolfo (2005/06), Hunter ,00 A UniLug for machines with 40 mm shaft, Corgi, HPA, Teco, Mondolfo ( from 2007) incl. Spacer 405e ,00 A UniLug for machines with conical shaft, Beissbarth, Sicam, Facom, Hofmann, Schenck 5.200,00 A 405e UniLug Spacer for Corghi, Faip, Sice, HPA, Mondolfo TECO 705,00 A 405e UniLug Adaptor ring Ø 28 mm 390,00 A 405e UniLug Adaptor ring Ø 36 mm 390,00 A 405e UniLug Adaptor ring Ø 38 mm 390,00 A 405e UniLug Adaptor ring Ø 40 mm 390,00 Side 24

25 Centering Rings series 405 A 405e Centering ring 58 mm 390,00 A 405e Centering ring 60 mm 390,00 A 405e Centering ring 65 mm 390,00 A 405e Centering ring 55 mm upon request 390,00 A 405e Centering ring 56 mm by request 390,00 Spare Parts for UniLug Series 400 and 405 A 405e Control disc UniLug II (plastic) 180,00 A 400e Complete lug for UniLug without chuck (series 405) 506,00 A 400e Fit screw UniLug II (serie 405) height of head 2,5 mm 99,00 A 400e Fit screw UniLug II (serie 405) height of head 3,2 mm 99,00 A 400e Knurled nut for lug 400e ,00 A 400e Complete lug for UniLug series 400, conical 475,00 A 400e Knurled nut M14x1.5 for Hofmann Geodyna Power Clamp 105,00 A 400e Knurled nut M14 for Hofmann P (AIR) 105,00 A PCD tool for UniLug 240,00 Side 25

26 B PCD measuring tool 685,00 Nuts and Fixcones A Set of fixcones (5 pieces) M10x1,25 mm (Haweka) 1.615,00 A Set of fixcones (5 pieces) M10x1,5 mm (Corghi/Cemb) 1.615,00 A Single Fixcone M10x1,25 mm (Haweka) 390,00 A Single Fixcone M10x1,5 mm (Corghi/Cemb) 390,00 A Fastening nut M10x1,25 mm round and cone head (Haweka) (1 pcs.) 55,00 A Fastening nut M10x1,25 mm extra long, round head, new Peugeots (1 p 68,00 A 040e Pressure piece for fixcone round head 68,00 A 040e Pressure piece for fixcone conical 68,00 Centering Rings for Original Hofmann Universal Adaptors A Centering ring 58 mm fits original Hofmann Universal Adaptors 390,00 A Centering ring 60 mm fits original Hofmann Universal Adaptors 390,00 A Centering ring 65 mm fits original Hofmann Universal Adaptors 390,00 A Centering ring 55 mm fits original Hofmann Universal Adaptors 390,00 A Centering ring 56 mm fits original Hofmann Universal Adaptors 390,00 Side 26

27 Truck Clamping Devices Truck Adaptors - Kits A Truck Adapter Kit Cemb ,00 A Truck adaptor kit Mondolfo 8.880,00 A Truck adaptor kit Hofmann Geodyna 20 L, B ,00 A Truck adaptor kit Corghi ET 76/86, Faip, Sice 9.435,00 A Truck adaptor kit Cemb P 200/GS ,00 A Truck/light truck adaptor kit Mondolfo with spacer ,00 A Truck/light truck adaptor kit Hofmann Geodyna 20 L, B ,00 A Truck/light truck adaptor kit Sicam / Beissbarth / Facom ,00 A Truck/light truck adaptor kit Corghi ET 76/86, Faip, Sice ,00 A Truck/light truck adaptor kit Balco 92/ ,00 A Truck/light truck adaptor kit Mondolfo, Far East Version 8.325,00 A Truck/light truck adaptor kit Corghi, Faip, Sice, Far East Version 8.325,00 A Truck/light truck adaptor kit Cemb ,00 A Truck/light truck adaptor kit Cemb / Tip Top ,00 Side 27

28 A Light truck adaptor kit Corghi ET 76/86 Faip, Sice 3.510,00 A Light truck adaptor kit Balco ,00 Truck Adaptors - Spare parts A Centering Bolt & Nut Truck (stundard) 220,00 A Centering Bolt & Nut Truck (Dynaf) 220,00 A Centering Bolt & Nut Truck (IFA) 220,00 A Centering Bolt & Nut Truck (Alloy wheels) 220,00 A Centering Bolt & Nut Truck (3 arm star Far East) 220,00 A Centering Bolt & Nut Truck (3 arm star Europe) 220,00 A arm clamping star truck incl. bolts ( ) Circle Diameter: 225 / 285 / 335 mm 3.120,00 A arm clamping star truck incl. bolts ( ) Circle Diameter: 275 / 285 mm 2.505,00 A arm clamping star incl. bolts Europe ( ) Circle Diameter: 170 / 184,15 / 205 / 222,25 / 245 mm 1.897,00 A arm clamping star truck incl. bolts Far East ( ) Circle Diameter: 170 / 184,15 / 205 / 222,25 / 245 mm 1.897,00 A 700e Knurled nut for truck adaptor M16 69,00 A 840e Knurled nut for truck adaptor M10 55,00 A 700e arm clamping star truck standard w/o bolts Circle Diameter: 225 / 285 / 335 mm 2.640,00 Side 28

29 A 700e arm clamping star truck standard w/o bolts Circle Diameter: 275 / 285 mm 2.185,00 A 700e arm clamping star truck Far East w/o bolts Circle Diameter: Ø12 (203,2 / 208 mm), Ø16 (285,75 / 335 mm) 2.640,00 A 700e arm clamping star truck w/o bolts Circle Diameter: 170 / / 205 / / ,00 A 700e arm clamping star truck Standard w/o bolts Circle Diameter: 225 / 285 / 335 mm 2.640,00 A 700e arm clamping star truck Standard w/o bolts Circle Diameter: 275 / 285 mm 2.185,00 A 700e Basic truck adaptor II Corghi/Faip/Sice Ø 46 mm 2.785,00 A 700e Basic truck adaptor II Balco/Hofmann, Sicam, Cemb, Bessbarth Ø 40 mm 2.785,00 A 700e Basic truck adaptor II Far East Ø 40 mm 2.785,00 A 70Be Truck Centering ring mm 1.598,00 A 70Be Truck Centering ring mm 1.598,00 Trilex and Dayton Adaptors A Trilex Adaptor 20" / 24", Fisher / Dayton 7.718,00 A Trilex Adaptor 20" / 22,5" / 24", Europa 7.718,00 A Trilex Adaptor 20" / 24", Fisher / Dayton 7.718,00 A Trilex Adaptor 20" / 22,5" / 24", Europa 7.718,00 Side 29

30 Motorcycle Clamping Devices - Series 805 Motorcycle Clamping Device - for conical shafts A ProBike II Modular System ECO 4.650,00 A ProBike II Modular System BASIC 5.500,00 A ProBike II Modular System STANDARD 6.650,00 A ProBike II Upgrade Kit Modular System PROFESSIONAL 4.905,00 A ProBike II Upgrade Kit Modular System EXPERT 6.955,00 Motorcycle Clamping Device - Power Clamp A ProBike II Modular System STANDARD 6.850,00 A ProBike II Upgrade Kit Modular System PROFESSIONAL 5.200,00 Motorcycle Clamping Device - cylindrical shafts 28 mm A ProBike II Modular System ECO 4.650,00 A ProBike II Modular System BASIC 5.500,00 A ProBike II Modular System STANDARD 6.650,00 ProBike II Upgrade Kit System PROFESSIONAL / EXPERT go to Side 30

31 Motorcycle Clamping Device - cylindrical shafts 36 mm A ProBike II Modular System ECO 4.650,00 A ProBike II Modular System BASIC 5.500,00 A ProBike II Modular System STANDARD 6.650,00 ProBike II Upgrade Kit System PROFESSIONAL / EXPERT go to Motorcycle Clamping Device - cylindrical shafts 38 mm A ProBike II Modular System ECO 4.650,00 A ProBike II Modular System BASIC 5.500,00 A ProBike II Modular System STANDARD 6.650,00 ProBike II Upgrade Kit System PROFESSIONAL / EXPERT go to Motorcycle Clamping Device-cylindrical shafts 40 mm Cemb, TipTop, Hofmann Megaplan, Hunter (not Serie 9700) A ProBike II Modular System ECO 4.650,00 A ProBike II Modular System BASIC 5.500,00 A ProBike II Modular System STANDARD 6.650,00 ProBike II Upgrade Kit System PROFESSIONAL / EXPERT go to Side 31

32 Motorcycle Clamping Device-cylindrical shafts 40 mm Corghi, Mondolfo, Teco, HPA ( from 2007) A ProBike II Modular System ECO 4.650,00 A ProBike II Modular System BASIC 5.500,00 A ProBike II Modular System STANDARD 6.650,00 ProBike II Upgrade Kit System PROFESSIONAL / EXPERT go to Motorcycle Upgrade Kit - cylindrical shafts mm A ProBike II Modular System PROFESSIONAL 4.905,00 A ProBike II Modular System EXPERT 6.950,00 Motorcycle Clamping Device - special connections A ProBike II Modular STANDARD Facom U47/87/ ,00 A ProBike II Modular STANDARD Facom U300 (M12) 6.975,00 A ProBike II Modular STANDARD for Cemb CB 114 / C ,00 Motorcycle Upgrade Kit - special connections A ProBike II Modular PROFESSIONAL Facom U47/87/ ,00 A ProBike II Modular PROFESSIONAL Facom U300 (M12) 5.200,00 A ProBike II Modular PROFESSIONAL for Cemb CB 114 / C ,00 Side 32

33 Spares and accessories Motorcycle adaptors Series 802 A Scooter adaptors (2 pcs.) suits ProBike motorcycle adaptor kit 488,00 B 802e Gas pressure spring series 802 (200 N) 429,00 B 802e Set of cantilevers (2 pcs.) ProBike Series ,00 A 840e Knurled nut M10 motorcycle shafts 10 and 12 mm 55,00 A 840e Knurled nut M14 motorcycle shafts 14 mm or more 55,00 Spares and Accessories Motorcycle Adaptors Series 805 A 800e Conical chuck Facom motorcycle adaptors (old) 1.290,00 A 800e Basic motorcycle adaptor Cemb/GS/Ammco/Beissbarth (old) Ø 28 mm 945,00 A 800e Chuck for ProBike base plate, conical 1.290,00 A 800e Chuck for ProBike base plate, conical (Hofmann P-Version) 1.290,00 A 803e Chuck for ProBike base plate, Ø 28 mm 945,00 A 803e Chuck for ProBike base plate, Ø 36 mm 945,00 A 803e Chuck for ProBike base plate, Ø 38 mm 945,00 A 803e Chuck for ProBike base plate, Ø 40 mm 945,00 A 803e Chuck for ProBike base plate, Ø 40 mm, long Version Corgi, Mondolfo, Teco, HPA from 01/07 945,00 Side 33

34 A 803e ProBike base plate, complete 2.760,00 A 803e Set of cantilevers (2 pcs.) - complete replacement set 1.525,00 B DUGA Gas pressure spring series 805 (200 N) 385,00 Spare Parts Series B 850e Polyamid pressure piece (19 mm axle) 162,00 A Set of centering cones mm (14 mm axle) 390,00 A 850e Centering cone (14 mm axle) 75,00 A Set of centering sleeves mm, (14 mm axle) 1.350,00 A Set of spezial centering sleeves w/o 19 mm shaft 4.210,00 A Set of centering sleeves 15 mm (14 mm axle) 165,00 A Set of centering sleeves 16 mm (14 mm axle) 165,00 A Set of centering sleeves 17 mm (14 mm axle) 165,00 A Set of centering sleeves 19 mm (14 mm axle) 165,00 A Set of centering sleeves 20 mm (14 mm axle) 165,00 Side 34

35 A Set of centering sleeves 22 mm (14 mm axle) 165,00 A Set of centering sleeves 25 mm (14 mm axle) 165,00 A Set of centering sleeves 26 mm (14 mm axle) 165,00 A Set of centering sleeves 28 mm (14 mm axle) 165,00 A Set of centering sleeves 30 mm (14 mm axle) 165,00 A Adaptor Kit BMW (14 mm axle) 735,00 A Adaptor kit HARLEY DAVIDSON (19 mm axle) 75,00 A Adaptor kit SUZUKI GSX R centering sleeves 25, 28, 32 mm (19 mm axle) 638,00 A Adaptor kit Aprilia RST Futura, BMW F 650 CS (19 mm axle) 555,00 A Adaptor kit Harley Davidson V Rod (19 mm axle) Ø 25,4 mm 270,00 A Set of centering sleeves 22 mm (19mm axle) 270,00 A Set of centering sleeves 24 mm (19mm axle) 270,00 A Set of centering sleeves 25 mm (19mm axle) 270,00 A Set of centering sleeves 28 mm (19mm axle) 270,00 Side 35

36 A Set of centering sleeves 30 mm (19mm axle) 270,00 A Set of centering sleeves 32 mm (19mm axle) 270,00 A Set of centering sleeves 35 mm (19mm axle) 270,00 A Set of screws (4 pcs.) for centering adaptor BMW 355,00 A 860e Spacer, short, 12 mm inside diameter 55,00 A 860e Polyamid pressure piece Honda/BMW (14 mm axle) 555,00 A 860e Centering sleeve Piaggio X9 rear wheel 46 mm (14 mm axle) 310,00 A 860e Centering sleeve BMW-K 100 SUITS (14 mm axle) 429,00 A 860e Spacer, short, 15 mm inside diameter 55,00 A 860e Spacer, short, 18 mm inside diameter 55,00 A 860e Adaptor Ducati, Triumpf (19 mm axle) 439,00 A 860e Adaptor HONDA NTV Goldwing 1800 (19 mm axle) 520,00 A 860e Centering sleeve MV Agusta Backwheel (19 mm axle) 480,00 A 860e Centering sleeve Aprilia / BMW / Yamaha (19 mm axle) 450,00 A 860e Spacer, short, 20 mm inside diameter 55,00 Side 36

37 A 860e Spacer, short, 25 mm inside diameter 55,00 A 860e Spacer, short, 28 mm inside diameter 55,00 A 990e Face spanner for knurled nuts and the like 75,00 Centering Shafts for MWCD Series A mm centering shaft for MWCD cylindrical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD cylindrical shaft, spec. gripping length 318 mm 1.635,00 A mm centering shaft for MWCD cylindrical shaft, gripping length 233 mm 1.088,00 Centering Shafts for MWCD Series A mm centering shaft for MWCD, gripping length 193 mm 1.088,00 A mm centering shaft for MWCD, gripping length 193 mm 1.088,00 A mm centering shaft for MWCD, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD, special gripping length 318 mm 1.635,00 A mm centering shaft for MWCD, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD, gripping length 270 mm 1.088,00 Side 37

38 A mm centering shaft for MWCD, gripping length 365 mm 1.800,00 A mm centering shaft for MWCD, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD, gripping length 278 mm 1.088,00 Centering Shafts MWCD Hofmann Power Clamp Series 805 A mm centering shaft for MWCD Power Clamp, gripping length 253 mm 1.635,00 A mm centering shaft for MWCD Power Clamp, gripping length 270 mm 1.635,00 Centering Shafts MWCD - Conical Series 805 A mm centering shaft for MWCD conical shaft, gripping length 177 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 177 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD conical shaft, special gripping length 302 mm 1.635,00 A mm centering shaft for MWCD conical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 270 mm 1.088,00 Side 38

39 A mm centering shaft for MWCD conical shaft, gripping length 365 mm 1.800,00 A mm centering shaft for MWCD conical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD conical shaft, gripping length 278 mm 1.088,00 Centering Shafts MWCD - various - only Series 802 A mm centering shaft for MWCD Cemb C20/22, gripping length 255 mm 1.088,00 A mm centering shaft for MWCD Cemb C20/22, gripping length 255 mm 1.088,00 A mm centering shaft for MWCD Mondolfo MT , gripping length 255 mm 1.088,00 A mm centering shaft for MWCD Mondolfo MT , gripping length 255 mm 1.088,00 A mm centering shaft for MWCD Corghi/Faip/Sice, gripping length 253 mm 1.088,00 A mm centering shaft for MWCD Corghi/Faip/Sice, gripping length 253 mm 1.088,00 A mm centering shaft for MWCD Coats, gripping length 261 mm 1.088,00 A mm centering shaft for MWCD fits Coats, gripping length 261 mm 1.088,00 A mm centering shaft for MotSV Balco 9000 / 9450 (M10x1), gripping length 255 mm 1.088,00 A mm centering shaft for MotSV Balco 9000 / 9450 (M10x1), gripping length 255 mm 1.088,00 Side 39

40 A mm centering shaft for MWCD Balco, gripping length 255 mm 1.088,00 A mm centering shaft for MWCD Balco, gripping length 255 mm 1.088,00 A mm centering shaft for MWCD Facom U47 / U87 / U97, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD Facom U47 / U87 / U97, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD Facom U300, gripping length 232 mm, M ,00 A mm centering shaft for MWCD Facom U300, gripping length 232 mm, M ,00 A mm centering shaft for MWCD Cemb/Ammco/GS, gripping length 233 mm 1.088,00 A mm centering shaft for MWCD Cemb/Ammco/GS, gripping length 260 mm Clamping Device Quick Fix for Series 802 / ,00 A Quick Fix for 14 mm shaft 930,00 A Quick Fix for 19 mm shaft 930,00 Side 40

41 Wheel Alignment Clamps and Accessories ProClamp STANDARD (with spring-loaded feet) A Set: (4 pieces) ProClamp without shafts ,00 ProClamp PLUS (with spring-loaded feet) A Set: (4 pieces) ProClamp for Optp Plus ,00 A Set: (4 pieces) ProClamp for Bear ,00 A Set: (4 pieces) ProClamp PLUS for Hunter incl. attachment shafts ,00 A Set: (4 pieces) ProClamp for JBC/FMC V ,00 A Set: (4 pieces) ProClamp for JBC V6 / V7 / V ,00 A Set: (4 pieces) ProClamp PLUS for JBC V501 / 901 / 3D incl. attachment shafts (for 3D necessary ) ,00 A Set: (4 pieces) ProClamp PLUS for Corghi incl. attachment shafts ,00 A Set: (4 pieces) ProClamp for Cemb / Ravaglioli / Space ,00 A Set: (4 pieces) ProClamp PLUS for Cemb New serie W 400 incl. attachment shafts ,00 A A Set: (4 pieces) ProClamp PLUS for Beissbarth incl. attachment shafts ProClamp SYNCRO (with spring-loaded feet) Set: (4 pieces) ProClamp Syncro for Hunter incl. attachment shafts , ,00 A Set: (4 pieces) ProClamp Syncro for JBC V6 / V7 incl. attachment shafts ,00 A Set: (4 pieces) ProClamp Syncro for John Bean V501 / 901 incl. attachment shafts ,00 Side 41

42 A Set: (4 pieces) ProClamp Syncro for Corghi incl. attachment shafts ,00 A Set: (4 pieces) ProClamp Syncro for Cemb New serie W 400 incl. attachment shafts ,00 A Set: (4 pieces) ProClamp Syncro for Beissbarth incl. attachment shafts Spoiler Adaptors ,00 A Spoiler Adaptor Hunter DSP 250 / Facom 985,00 A Spoiler Adaptor Mondolfo Ferro (New) 985,00 A Spoiler Adaptor FMC/JBC V3 etc. old 985,00 A Spoiler Adaptor JBC V6/7/8 etc. 985,00 A Spoiler Adaptor for V 501 / ,00 A Spoiler Adaptor Corghi 985,00 A Spoiler Adaptor Beissbarth / Sicam / Facom 985,00 Wheel Alignment Shafts for ProClamp B 912e Shaft Bear 325,00 B 912e Shaft Hunter DSP 325,00 B 912e Shaft Hofmann Dynaliner ,00 B 912e Shaft JBC / FMC Old V3 etc 325,00 Side 42

43 B 912e Shaft JBC New V6/7 etc 325,00 B 912e Shaft V501 / 901 JBC, 3D (necessary ) 325,00 B 912e Shaft HPA 325,00 B 912e Shaft Corghi / Muller Bem ,00 B 912e Shaft Cemb / Rav / Space 325,00 B 912e Mondolfo / HPA 325,00 B 912e New Cemb serie W ,00 B 912e Shaft Beissbarth / Sicam 325,00 Accessories / Spare parts for ProClamp Standard and Syncro B Upgrade Kit (4 Sets) from ProClamp Standard to Profi: pins, Porsche sleeves and Tool-Box - also for ProClamp Syncro 4.290,00 B Set of 5 pins 75 mm ProClamp - also for ProClamp Syncro 366,00 B Set of 5 pins 100 mm ProClamp - also for ProClamp Syncro 366,00 B Set of 5 pins 115 mm ProClamp - also for ProClamp Syncro 366,00 B Softline foot (1 piece) Beissbarth, spring-loaded 158,00 B Softline foot (kit of 12 pieces) Beissbarth, spring-loaded 1.760,00 Side 43

44 C Clamping kit for Rims >22" ProClamp with spring-loaded feet (3 pieces) 480,00 B spring-loaded Feet (kit of 1 piece) for special spoke rims (VW, Ford, Skoda) 140,00 B spring-loaded Feet (kit of 12 pieces) for special spoke rims (VW, Ford, Skoda) 1.435,00 C Adapterzapfen ProClamp for John Bean 3D (4 St.) 1.615,00 C Repair kit spindle grab arm assembly for ProClamp Standard and PLUS 825,00 C Repair kit spindle grab arm assembly for ProClamp Syncro 875,00 B 912e plastic feet for 912e ,00 B 912e Screw to hold 912e ,00 B 912e Softline feet for 912e ,00 C 912e Grab arm assembly (Exchange basis only) for ProClamp Standard 1.305,00 C 912e Grab arm assembly (Exchange basis only) for ProClamp PLUS 1.650,00 C 912e Grab arm assembly (Exchange basis only) for ProClamp Syncro 1.650,00 C feet for ProClamp, utility vehicle, L-Lkw (1 piece) 265,00 C feet for ProClamp, utility vehicle, L-Lkw (6 pieces) 1.450,00 A 912e Grab arm ProClamp 4x4 270,00 Side 44

45 A 912e Foot-receivers 45,00 C 912e Telescopic Grab Arm for ProClamp 180,00 B 912e Bracket 180,00 B 912e Spacer, 54mm, Porsche 488,00 B 912e Softline Foot (1 piece) ProClamp, spring-loaded 135,00 B 912e Softline Feet (kit of 12 pieces) ProClamp, spring-loaded (Standard) 1.435,00 B 912e Centering Sleeve Porsche ProClamp, e.g. Porsche Cayenne (Standard) 488,00 B 912e ProClamp Adapter for Smart For Four (Circle Diameter 4 x 114,3 mm) 2.160,00 Accessories for VW / Audi / Mercedes B Inclinometer with case 8.299,00 N VAG Bridge for alignment on Audi A4/6/8 and Passat B ,00 Side 45

46 ProTorks (selling-off) B ProTork 19 mm, 90 Nm RAL 1021 yellow, 1/2in. Drive 315,00 B ProTork 17 mm, 110 Nm RAL 3000 red, 1/2in. Drive 315,00 B ProTork 19 mm, 135 Nm RAL 7001 grey, 1/2in. Drive 315,00 B ProTork 21 mm, 110 Nm RAL 8003 light brown, 1/2in. Drive 315,00 B ProTork 19 mm, 110 Nm RAL 5010 blue, 1/2in. Drive 315,00 B ProTork 13/16" 135 Nm RAL 8014 dark brown, 1/2in. Drive 315,00 B ProTork 17 mm, 75 Nm RAL 6002 green, 1/2in. Drive 315,00 B ProTork 21 mm, 80 Nm RAL 9005 black, 1/2in. Drive 315,00 B ProTork 7/8", 160 Nm RAL 11 white, 1/2in. Drive 315,00 B ProTork 7/8", 190 Nm RAL 5018 turquoise, 1/2in. Drive 315,00 B ProTork 19 mm, 75 Nm RAL 5013 dark blue, 1/2in. Drive 315,00 B ProTork 17 mm, 95 Nm RAL 1001 beige, 1/2in. Drive 315,00 B ProTork 17 mm, 150Nm Orange, 1/2in. Drive 315,00 B ProTork 22 mm, 130 Nm Beige, 1/2in. Drive 315,00 B ProTork 17 mm, 85 Nm fir-green, 1/2in. Drive 315,00 Side 46

47 B ProTork holding device (for 5 sticks) 105,00 General Accessories A Rim width caliper 240,00 A Wheel weight plier 228,00 A Run-out measuring device with support 3.675,00 A Balancing model 1.250,00 A Special weight application tool 390,00 C Plug gauge 28/36mm 788,00 C Plug gauge 38/40mm 788,00 C Set of plug gauges and measuring forks 3.645,00 C Shaft gauge (to check the diameter) 28/36mm 1.075,00 C Shaft gauge (to check the diameter) 38/40mm 1.075,00 A piece wheel weight depressing tool 1.765,00 A Knee-Pad Set of 4 pcs. 630,00 A Flange Plate Storage Facility Trolley with perforated plate and 40 mm Ø pins 1.065,00 A Flange Plate Storage Facility Trolley with tray and 40 mm Ø pins 1.065,00 Side 47

48 A Flange Plate Storage Facility Trolley with perforated plate and 28 mm Ø pins 1.065,00 A Flange Plate Storage Facility Trolley with tray and 28 mm Ø pins 1.065,00 A Wall Board "PKW" 788,00 A Wall Board "Off Road" 788,00 A Wall Board ProBike II "Standard" 788,00 A Wall Board ProBike II "Profi" 788,00 A Wall Board QuickPlate 788,00 A Testing Device for Wheel Balancers ,00 A 900e Dial gauge 1mm graduation incl. scanning small wheel 2.445,00 A 900e Scraper to remove stick on alloy weights 98,00 A 900e Wall Board Stand (wall boards not included) 1.950,00 Side 48

49 Accessories / Booster C Booster inflation tank c/w accessories 3.520,00 C Big Booster inflation tank c/w accessories 4.425,00 A Wheel mounting aid 355,00 Lifting Device B Airgo Lift, wheel lifting device for balancers 9.200,00 Spare parts Lifting Device AirgoLift Bellow -- ** Compressed-Air Connection Bellow -- ** Grooved Ball Bearing -- ** Connection -- ** Compressed-Air Connection of Lower Base Frame -- ** Holding plate for hoop guard -- ** Complete Handle -- ** Roller -- ** Headless Screw of Support Plate -- ** Headless Screw of Base Plate -- ** -- Control Unit Torsion Spring -- ** Foot Pedal -- ** Compressed Air Connection of Steering Valve -- ** Steering Valve -- ** Spacer -- ** -- Side 49

50 Wheel Alignment Systems for passenger cars CA-10 C Wheel alignment system CA-10 complete ,00 CA-10 Wheel Alignment System spares C Put on scale for ProClamp (rear axle) 810,00 C Steering wheel adjusting level 810,00 C Tool stand CA ,00 C Scalesupport (passenger cars) 1.060,00 N Installation fee 1.950,00 CA-10 Wheel Alignment System Accessories C Magnetic scale support (Passenger cars) 685,00 C Clamping kit for Rims >22" ProClamp with spring-loaded feet (3 pieces) 480,00 Wheel Alignment Systems for Utility Vehicles TA-20 TA-20 Truck Wheel Alignment System C Wheel alignment system TA-20-2 complete with new laser heads and Inclinometer ,00 C Wheel alignment system TA-20-5 complete with new laser heads and Inclinometer with autom. angle identification ,00 C Upgrade kit for trailer and semitrailer alignment 7.400,00 C Upgrade kit for alignment of twin steered axles ,00 C Upgrade kit for passenger cars 9.600,00 Side 50

51 C Upgrade kit for special truck rims (Trilex / Dayton) 3.285,00 C Wheel alignment system for agricultural machines ,00 N Installation fee 3.500,00 TA-20 Truck Wheel Alignment System Accessories B Set of 5 pins 75 mm, (2 kits = 10 pieces needed) 300,00 B Set of 5 pins 100 mm, (2 kits = 10 pieces needed) 300,00 B Set of 5 pins 115 mm, (2 kits = 10 pieces needed) 300,00 C Turning plate left / right (1 pieces) 2.685,00 C Adjusting device for measuring heads 4.125,00 C Frame scale for busses and chassis 8.235,00 TA-20 / HD-20 Truck Wheel Alignment System spares A 912e Grab arm ProClamp Truck 270,00 C 912e Grab arm assembly truck (complete) 1.240,00 A 912e Grab arm (Light truck) ,00 B 912e Softline Foot (1 piece) ProClamp, spring-loaded 5.450,00 C Laser head new, for TA-20-2 / -5/ CA ,00 C Akkupack for Laser head 5.365,00 Side 51

52 C Laser head (battery version) 4.210,00 C Electronic Camber Gauge and base 6.585,00 C Digital protractor Inclinometer for Ø 40 mm 8.235,00 C Digital protractor Inclinometer for Ø 40 mm with autom. angle identification 1.050,00 C Cal block for ,00 C Magnetic chassis scale 2.065,00 C T.O.O.T. floor scale, ,00 C Power charger old version (TA-20 with Akku) 990,00 C mm long magnetic foot 460,00 C mm long magnetic foot 460,00 C mm long magnetic foot 540,00 C mm long magnetic foot 625,00 C Scale for toe measurement 3.350,00 Side 52

53 Wheel Alignment Systems for Utility Vehicles TA-40 TA-40 Truck Wheel Alignment System N Camera Radio Wheel Alignment System TA-40 incl. Software ,00 C Upgrade kit for trailer and semitrailer alignment 6.435,00 C Upgrade kit for alignment of twin steered axles 5.365,00 A Upgrade kit for passenger cars 7.920,00 C Upgrade kit for special truck rims (Trilex/Dayton) 3.285,00 N Installation fee 6.900,00 TA-40 Truck Wheel Alignment System Accessories B Set of 5 pins 75 mm, (2 kits = 10 pieces needed) 300,00 B Set of 5 pins 100 mm, (2 kits = 10 pieces needed) 300,00 B Set of 5 pins 115 mm, (2 kits = 10 pieces needed) 300,00 C Adjusting device for measuring heads 4.125,00 C Trolley 2.065,00 C Frame scale new 6.645,00 Side 53

54 TA-40 Truck Wheel Alignment System spares C Camera, electronical ,00 C Transceiver - receiver ,00 C Accumulator 4,8 Volt 630,00 C double Battery charger, Power supply, Ciggarette Cable Adapter 12 V 2.468,00 C Left front scale table, Toe scale TA ,00 C Right front scale table, Toe scale TA ,00 C Left rear scale table, Toe scale TA ,00 C Right rear scale table, Toe scale TA ,00 C Scale right/left (Floor scale) 1.450,00 C Tripod complete, support for scale toe measuring 1.240,00 C Support for scale (outer part) 405,00 C Support for scale (center piece) 405,00 C Support for scale (inner part) 405,00 C Support for Magnetic scale 810,00 C Pins for scales 45,00 Side 54

55 A 912e Grab arm ProClamp Truck 270,00 C 912e Grab arm assembly truck (complete) 1.240,00 A 912e Grab arm (for light trucks) 270,00 C 912e Telescopic Grab arm (for passenger cars) 180,00 C mm long magnetic foot 460,00 C mm long magnetic foot 460,00 C mm long magnetic foot 540,00 C mm long magnetic foot 625,00 B 912e Softline Foot (1 piece) ProClamp, spring-loaded 135,00 #VÆRDI! Side 55