R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity Maximum lifting height RTH 5.26 S 4.999 kg (center of gravity 500 mm) 25,76 m Type Mercedes OM 934 LA Stage IV Mercedes OM 904 LA Stage 3A Rated power 129 kw - 175 HP at 2.200 rpm 129 KW - 175 HP at 2.200 rpm Maximum torque 750 Nm at 1.200-1.600 rpm 675 Nm at 1.200-1.600 rpm Displacement 5,13 l 4,25 l Cylinders 4 in line 4 in line Fuel Cooling system Type Model Maximum pressure Displacements Gear box Type Rear axle Diesel direct injection turbocharged Water intercooler Hydrostatic closed loop Bosch Rexroth 500 bar Variable displacement pump electronically controlled. Variable displacement motor 2 speed drop box forward-reverse Axles with epicyclic reduction gear Oscillating and steering with hydraulic locking Front axle Oscillating and steering with automatic levelling +/- 10 Service brake Parking brake Hydraulically activated, oil-immersed in-board multi-disc type on each axle Hydraulic with negative action Tyres dimensions 445/65 R 22,5 Max. travel speed Tractive force at the hook 41 km/h 80 kn Gradeability 42% Turning radius (end of forks) Total unladen Front unladen (boom retracted and lowered) Rear unladen (boom retracted and lowered) 6.480 mm 20.050 kg 9.050 kg 11.000 kg Fuel tank 180 l 180 l AdBlue 40 l Hydraulic oil tank 220 l 220 l Engine oil tank 20,5 l 16 l Cooling liquid 36 l 36 l Max. operating system pressure 350 bar Circuit type Load sensing Service pump Bosch Rexroth Variable displacement Distributor for boom and turret movements Danfoss Electroproportional valve SIL 2 Distributor for stabilizers Bosch Rexroth Electro-hydraulics controls Movements control 2 joystick Danfoss with two shafts with dead man safety device. Management with CAN bus technology Max. length (boom retracted and lowered) 7.820 mm (at vertical point of forks foothold) Max. width 2.500 mm (on wheels) Max. height (boom retracted and lowered) 3.090 mm (on wheels) Wheel base 3.300 mm Ground clearance 320 mm EN 13849: concerning the safety of all controls of the machine EN 13000: concerning the standard of hydraulic cranes EN 280: concerning the standard of aerial platforms FOPS/ROPS 97/68/CE: concerning engine emissions standards The data in this brochure are informative and subject to change without notice 3200 1050 5810 3090 R4630 12 121 320 1350 1260 1470 1700 1260 3300 1550 1200 7820 2070 2500 5500 6000 R3250 R4060 5310 Magni_Depliant_RTH5-26S_rosso_2015.indd 1-2 GRONINGEN BERLIKUM ALPHEN AD RIJN 085 48 92 181 planning@bultena.nl www.bultena.nl