Slides and Drawers The right collection
1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn, bottom mounting EasyFix system, bottom mounting PlugIn, bottom mounting full extension EasyFix system, bottom mounting full extension Plugin system, bottom mounting EasyFix system, bottom mounting 40 25 40 25 40 30 40 30 40 25 40 25 0203 0405 0607 0809 1011 1213 Roller Runners 082 2 R82 O62 085 Bottom mounting selfclosing slide Selfclosing pan drawer slide with front bracket Machine driven, clamp fix bottom mounting selfclosing slide Bottom mounting full extension selfclosing slide Side mounting slide, non selfclosing 40 25 40 25 40 25 40 25 40 25 14 15 17 Ball Bearing Runners 120 135 135K 145 PDF Ball bearing runners for 17 mm groove 35 mm ball bearing runners Ball bearing slides for pullout shelf 45 mm ball bearing runners Sliding door system 15 12 50 25 50 25 60 50 40 25 19 20 21 22 23 Fast Mago Assembly machines for R82 Pneumatic pliers 24 24 2Technical Details Metal Drawers 25 551 651 681 751 781 851 881 Metal drawers H 53 KeyHole attachment, metal drawers H85 Metal drawers H 85 Metal drawers H 117 Metal drawers H150 40 25 40 25 40 25 40 25 40 25 26 27 2829 3031 33 MAC 3 MAC 1 Drawer assembly machine 681 781 881 Drawer assembly machine 551 651 751 851 34 34 3 Accessoraies Runner and Drawer accessories 3537
Excel N NH Excel N NH Excel N NH Excel N650 N650H Excel N 082 2 R82 062 085 120125 135 135K 145 PDF Fast Mago Drawer Slides The full range of fine quality, high technology drawer slides displayed in this catalogue provide every option demanded by a diverse market. Designed to provide sidetoside stability and smooth continuous action, even extension loss has been reduced considerably to allow maximum access to the drawer. All runners are continually tested and put through intensive tests of up to 80,000 openings and closings, with a particularly high load capacity bearing, both dynamic and static. The SOWMOTION and ONETOUCH devices are available for Excel N NH, Excel NNH, Excel N NH, Excel N650N650H slides. 1
Excel NNH Concealed runner, PlugIn system bottom mounting Soft closing SOWMOTION on request Opening system ONETOUCH on request Silent system Selfclosing system Greater sidetoside stability Front vertical adjustment + 4 mm Fastened to drawer with: chipboard screws Euro screws premounted 8 10 mm dowels Fixing hole positions Drilling pattern 250 CABINET FRONT Drawer with front A 37 2 B = + 3 Internal drawer A + X Ø 6.6 9 9 X 37 37 128 0 192 256 288 20 B = + 21 Cabinet dimensions Extension loss K N B N= Excel runner s nominal length B= Cabinet internal depth K= Cabinet internal width Cabinet = Internal dimensions for: Drawer with front: B min = N+3 mm Internal drawer: B min = N+21 mm CABINET FRONT N 250 N NH AV 68.5 78.5 68.5 78.5 88.5 98.5 108.5 1.5 108.5 1.5 108.5 1.5 128.5 138.5 128.5 138.5 N = Nominal AV = Extension loss 2
Fixing dimensions Drawer dimensions K max 20.5 12 10 max 9.5 10 40 40 +1 0 K 40 20 = EXCE RUNNER NOMINA ENGTH A = DRAWER DEPTH B = CABINET MIN INTERNA DEPTH K = CABINET INTERNA WIDTH Drawer with front Depth: 10 Internal drawer Depth: 10+X Drawer mounting Dimensions and drilling of the drawer 10 Ø6 Y A +0 0.5 CABINET FRONT 7 11 6 10 Ø6 Vertical adjustment +4 mm 250 N A 240 290 340 390 440 490 540 590 Y 221 271 1 371 421 471 521 571 260 310 360 410 460 510 560 610 NH A 250 Y 231 281 331 381 431 481 531 581 Slowmotion and OneTouch Product codes N NH Slowmotion device available on request 54.N.07.25_.0 54.N.07.30_.0 54.N.07.35_.0 54.N.07.40_.0 54.N.07.45_.0 54.N.07.50_.0 54.N.07.55_.0 54.N.07.60_.0 54.N.H7.25_.0 54.N.H7.30_.0 54.N.H7.35_.0 54.N.H7.40_.0 54.N.H7.45_.0 54.N.H7.50_.0 54.N.H7.55_.0 54.N.H7.60_.0 Screws for this slide series are illustrated on page 37 OneTouch device available on request Bagged 24 pcs per box 0 = with SelfClosing X = with Slowmotion P = with OneTouch 3
Excel NNH Concealed runner, EasyFix system bottom mounting Soft closing SOWMOTION on request Opening system ONETOUCH on request Silent system Selfclosing system Greater sidetoside stability Front vertical adjustment + 3 mm Fastened to drawer with: chipboard screws Euro screws premounted 8 10 mm dowels Fixing hole positions Drilling pattern 250 CABINET FRONT Drawer with front A 37 2 B = + 3 Internal drawer A + X Ø 6.6 9 9 X 37 37 128 0 192 256 288 20 B = + 21 Cabinet dimensions Extension loss K N B N= Excel runner s nominal length B= Cabinet internal depth K= Cabinet internal width Cabinet = Internal dimensions for: Drawer with front: B min = N+3 mm Internal drawer: B min = N+21 mm CABINET FRONT N 250 N NH AV 68.5 78.5 68.5 78.5 88.5 98.5 108.5 1.5 108.5 1.5 108.5 1.5 128.5 138.5 128.5 138.5 N = Nominal AV = Extension loss 4
min 85min Fixing dimensions Drawer dimensions K max 20.5 12 10 max 9.5 10 40 40 +1 0 K 40 20 = EXCE RUNNER NOMINA ENGTH A = DRAWER DEPTH B = CABINET MIN INTERNA DEPTH K = CABINET INTERNA WIDTH Drawer with front Depth: 10 Internal drawer Depth: 10+X Drawer mounting Dimensions and drilling of the drawer A 7 CABINET FRONT 11 10 Ø6 Push Vertical adjustment +3 mm 250 N A 240 290 340 390 440 490 540 590 260 310 360 410 460 510 560 610 NH A 250 Slowmotion and OneTouch Product codes N NH Slowmotion device available on request 54.N.07.25_.0 54.N.07.30_.0 54.N.07.35_.0 54.N.07.40_.0 54.N.07.45_.0 54.N.07.50_.0 54.N.07.55_.0 54.N.07.60_.0 54.N.H7.25_.0 54.N.H7.30_.0 54.N.H7.35_.0 54.N.H7.40_.0 54.N.H7.45_.0 54.N.H7.50_.0 54.N.H7.55_.0 54.N.H7.60_.0 Screws for this slide series are illustrated on page 37 OneTouch device available on request Bagged 24 pcs per box 0 = with SelfClosing X = with Slowmotion P = with OneTouch 5
Excel NNH Concealed runner, Plugin system full extension, bottom mounting Soft closing SOWMOTION on request Opening system ONETOUCH on request Silent system Selfclosing system Greater sidetoside stability Front vertical adjustment + 4 mm Fastened to drawer with: chipboard screws Euro screws premounted 8 10 mm dowels Fixing hole positions Drilling pattern 250 CABINET FRONT Drawer with front A 37 2 B = + 3 9 9 Internal drawer Ø 6 A + X 37 128 0 192 256 288 0 X 37 20 B = + 21 Cabinet dimensions N= Excel runner s nominal length B= Cabinet internal depth K= Cabinet internal width K N B Cabinet = Internal dimensions for: Drawer with front: B min = N+3 mm Internal drawer: B min = N+21 mm 6
Fixing dimensions Drawer dimensions K 10 max 9.5 max 10 N: 20 NH: 10 N: 20+X NH: 10+X 40 40 28.2 24.5 12 +1 K 40 0 20 = EXCE RUNNER NOMINA ENGTH A = DRAWER DEPTH B = CABINET MIN INTERNA DEPTH K = CABINET INTERNA WIDTH Drawer with front Depth: N: 20 NH: 10 Internal drawer Depth: N: 20+X NH: 10+X Drawer mounting Dimensions and drilling of the drawer 10 Ø6 28 A Y +0 0.5 CABINET FRONT 7 11 28 6 10 Ø6 Vertical adjustment +4 mm 260 310 360 410 460 510 560 610 N A 240 290 340 390 440 490 540 590 Y 221 271 1 371 421 471 521 571 260 310 360 410 460 510 560 610 NH A 250 Y 231 281 331 381 431 481 531 581 Slowmotion and OneTouch Product codes N NH Slowmotion device available on request 54.N.07.25_.0 54.N.07.30_.0 54.N.07.35_.0 54.N.07.40_.0 54.N.07.45_.0 54.N.07.50_.0 54.N.07.55_.0 54.N.07.60_.0 54.N.H7.25_.0 54.N.H7.30_.0 54.N.H7.35_.0 54.N.H7.40_.0 54.N.H7.45_.0 54.N.H7.50_.0 54.N.H7.55_.0 54.N.H7.60_.0 Screws for this slide series are illustrated on page 37 OneTouch device available on request Bagged 12 pcs per box 0 = with SelfClosing X = with Slowmotion P = with OneTouch 7
Excel N650N650H Concealed runner, EasyFix system full extension, bottom mounting Soft closing SOWMOTION on request Opening system ONETOUCH on request Silent system Selfclosing system Greater sidetoside stability Front vertical adjustment + 3 mm Fastened to drawer with: chipboard screws Euro screws premounted 8 10 mm dowels Fixing hole positions Drilling pattern 250 CABINET FRONT Drawer with front A 37 2 B = + 3 9 9 Internal drawer Ø 6 A + X 37 128 0 192 256 288 0 X 37 20 B = + 21 Cabinet dimensions N= Excel runner s nominal length B= Cabinet internal depth K= Cabinet internal width K N B Cabinet = Internal dimensions for: Drawer with front: B min = N+3 mm Internal drawer: B min = N+21 mm 8
28min 85min Fixing dimensions Drawer dimensions K 10 max 9.5 max 10 N650: 20 N650H: 10 N650: 20+X N650H: 10+X 40 40 28.2 24.5 12 +1 K 40 0 20 = EXCE RUNNER NOMINA ENGTH A = DRAWER DEPTH B = CABINET MIN INTERNA DEPTH K = CABINET INTERNA WIDTH Drawer with front Depth: N650: 20 N650H: 10 Internal drawer Depth: N650: 20+X N650H: 10+X Drawer mounting Dimensions and drilling of the drawer A 7 11 CABINET FRONT 10 Ø6 Push Vertical adjustment +3 mm 260 310 360 410 460 510 560 610 N650 A 240 290 340 390 440 490 540 590 260 310 360 410 460 510 560 610 N650H A 250 Slowmotion and OneTouch Product codes N650 N650H Slowmotion device available on request 54.N650.07.25_.0 54.N650.07.30_.0 54.N650.07.35_.0 54.N650.07.40_.0 54.N650.07.45_.0 54.N650.07.50_.0 54.N650.07.55_.0 54.N650.07.60_.0 54.N650.H7.25_.0 54.N650.H7.30_.0 54.N650.H7.35_.0 54.N650.H7.40_.0 54.N650.H7.45_.0 54.N650.H7.50_.0 54.N650.H7.55_.0 54.N650.H7.60_.0 Screws for this slide series are illustrated on page 37 OneTouch device available on request Bagged 12 pcs per box 0 = with SelfClosing X = with Slowmotion P = with OneTouch 9
Excel N Concealed runner, PlugIn system, bottom mounting Silent system Selfclosing system Greater sidetoside stability Front vertical adjustment + 4 mm Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Fixing hole positions Drilling pattern CABINET FRONT 270 Drawer with front Internal drawer Adjustments CABINET FRONT Screw for the vertical adjustment of the drawer Cabinet dimensions Extension loss W N T N = Excel runner s nominal length T = Cabinet internal depth W = Cabinet internal width Cabinet = Internal dimensions for: Drawer with front: T min = N+3 mm Internal drawer: T min = N+21 mm CABINET FRONT N AV 270 84.5 84.5 84.5 1.5 1.5 1.5 1.5 1.5 10 N = Nominal AV = Extension loss
Fixing dimensions Drawer dimensions Drawer width Drawer with front Depth: N10 Internal drawer Depth: N10+X Position of the runners in the cabinet Dimensions and drilling of the drawer 11 656 270 RUNNER 415 390 355 330 305 270 245 230 A 125 3 Drawer mounting 125 8 Runner mounting under drawer Four sided drawer with front Product codes Three sided drawer with front Internal drawer with front Double spring 54.N.07.270.0000 54.N.07..0000 54.N.07..0000 54.N.07..0000 54.N.07..0000 54.N.07..0000 54.N.07..0000 54.N.07..0000 Bagged 24 per box Screws for this slide series are illustrated on page 37 11
Excel Concealed runner, EasyFix system, bottom mounting Silent system Selfclosing system Greater sidetoside stability Easy mounting without accidental release thanks to Easy fix device Front vertical adjustment + 3 mm Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Fixing hole positions Drilling pattern CABINET FRONT 270 Drawer with front Internal drawer Adjustments ever for drawer regulation CABINET FRONT Cabinet dimensions Extension loss W N T N = Excel runner s nominal length T = Cabinet internal depth W = Cabinet internal width Cabinet = Internal dimensions for: Drawer with front: T min = N+3 mm Internal drawer: T min = N+21 mm CABINET FRONT N AV 270 84.5 84.5 84.5 1.5 1.5 1.5 1.5 1.5 12 N = Nominal AV = Extension loss
Fixing dimensions Drawer dimensions Drawer width Drawer with front Depth: N10 Internal drawer Depth: N10+X Position of the runners in the cabinet Dimensions and drilling of the drawer 11 656 125 3 Drawer mounting 125 8 Runner mounting under drawer PUSH Four sided drawer with front Product codes Three sided drawer with front Internal drawer with front Double spring 54.0.07.270.0000 54.0.07..0000 54.0.07..0000 54.0.07..0000 54.0.07..0000 54.0.07..0000 54.0.07..0000 54.0.07..0000 Bagged 24 per box Screws for this slide series are illustrated on page 37 13
082 Roller runner, bottom mounting selfclosing slide Selfclosing system Antinoise epoxypowder treatment Safety double stop Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Mounting hole position Drilling diagram 270 Installation measurements 12.5 12.5 15 22 5.5 Product codes Extension loss Screw fixing 54.0082.0_.270._0 54.0082.0_.._0 54.0082.0_.._0 54.0082.0_.._0 54.0082.0_.._0 54.0082.0_.._0 54.0082.0_.._0 54.0082.0_.._0 Dowel fixing 54.0084..270._0 54.0084..._0 54.0084..._0 54.0084..._0 54.0084..._0 54.0084..._0 54.0084..._0 54.0084..._0 0 = Dowels Ø 10 x 10 A = Dowels Ø 8 x 11 D = Dowels Ø 8 x 8 37 2 Standard position for the dowels 256 0 352 4 448 512 = AV = Extension loss Vertical adjustment AV AV 270 87 87 87 97 97 97 117 117 0 = Profile packaging, 100 per box 1 = Pair packaging, 25 per box 2 = Pairs fastened with adhesive tape, 25 per box 3 = Bagged pairs, 25 per box with screws 5 = Bagged pairs, 25 per box without screws = Available colours: 1 =White Ral 9010 2 =Brown 3 =Black Ral 9005 4 =Ivory Ral 9001 5 =Beige 6 =Grey Ral 7004 8 =Silver Ral 9006 Available on request 14 Screws for this slide series are illustrated on page 37
2 Roller runner, selfclosing pan drawer slide with front bracket Selfclosing system Antinoise epoxypowder treatment Safety double stop Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Drilling diagram Mounting hole position 270 Installation measurements 26 mm. 64 6 30 15 12.5 5.5 12.5 Extension loss Product codes + 2.5 mm. 2.5 mm. ± 2.5 DR Vertical adjustment AV DR = of runner = of carcass member Vertical Adjustment DR 270 AV = Extension loss 270 AV 87 87 87 97 97 97 117 117 Screw fixing 54.02.0_.270.00 54.02.0_..00 54.02.0_..00 54.02.0_..00 54.02.0_..00 54.02.0_..00 54.02.0_..00 54.02.0_..00 Dowel fixing 54.04..270.00 54.04...00 54.04...00 54.04...00 54.04...00 54.04...00 54.04...00 54.04...00 0 = Dowels Ø 10 x 10 A = Dowels Ø 8 x 11 D = Dowels Ø 8 x 8 Standard position for the dowels 37 2 256 0 352 4 448 512 Available on request Packing of profiles: carcass member, 100 per box drawer member, 25 per box = Available colours: 1 =White Ral 9010 2 =Brown 3 =Black Ral 9005 4 =Ivory Ral 9001 5 =Beige 6 =Grey Ral 7004 8 =Silver Ral 9006 Screws for this slide series are illustrated on page 37 15
R82 Roller runner, machine driven, clamp fix bottom mounting selfclosing slide Selfclosing system Antinoise epoxypowder treatment Safety double stop Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Mounting hole position Drilling diagram 270 Installation measurements 12.5 12.5 1214 1013 15 Min. 9 22 Min. 9 ART. 54.R820 ART. 54.R82M Product codes Screw fixing 54.0R82.0_.27_.00 54.0R82.0_.30_.00 54.0R82.0_.35_.00 54.0R82.0_.40_.00 54.0R82.0_.45_.00 54.0R82.0_.50_.00 54.0R82.0_.55_.00 Dowels fixing 54.0R84..27_.00 54.0R84..30_.00 54.0R84..35_.00 54.0R84..40_.00 54.0R84..45_.00 54.0R84..50_.00 54.0R84..55_.00 0 = Dowels Ø 10 x 10 A = Dowels Ø 8 x 11 D = Dowels Ø 8 x 8 Standard position for the dowels 37 2 256 0 352 4 448 Extension loss = AV = Extension loss AV AV 270 87 87 87 97 97 97 117 The machine for mounting these runners is shown on page 20 of this catalogue Vertical adjustment 0 = For drawer side 1214 M = For drawer side 1013 Profile packaging, 100 per box = Available colours: 1 =White Ral 9010 2 =Brown 3 =Black Ral 9005 4 =Ivory Ral 9001 5 =Beige 6 =Grey Ral 7004 8 =Silver Ral 9006 Available on request Screws for this slide series are illustrated on page 37
062 Roller runner, bottom mounting full extension slide, selfclosing Selfclosing system Antinoise epoxypowder treatment Safety double stop Fastened to drawer with: chipboard screws Euro screws Drilling diagram Mounting hole position Ø 5.6 Ø 6.6 5.6 x 9 12 2 28 37 Installation measurements 12.5 12.5 64 47 2 64 28 37 128 96 128 128 64 Drawer member installation measurements Product codes 5.5 35 10 10 Screw fixing 54.5062.0_.._0 54.5062.0_.._0 54.5062.0_.._0 54.5062.0_.._0 54.5062.0_.._0 54.5062.0_.._0 54.5062.0_.._0 0 = Profile packaging, 10 per box 2 = Pairs fastened with adhesive tape, 10 per box 3 = Bagged pairs, 10 per box = Available colours: 1 =White Ral 9010 2 =Brown 3 =Black Ral 9005 4 =Ivory Ral 9001 5 =Beige Screws for this slide series are illustrated on page 37 17
085 Roller runner, side mounting, non selfclosing Antinoise epoxypowder treatment Safety double stop Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Mounting hole position Drilling diagram * Installation measurements 12.5 12.5 7.5 22 4.5 See Drilling Diagram Product codes Extension loss 0 = Dowels Ø 10 x 10 A = Dowels Ø 8 x 11 D = Dowels Ø 8 x 8 Screw fixing 54.5085.0_.._0 54.5085.0_.._0 54.5085.0_.._0 54.5085.0_.._0 54.5085.0_.._0 54.5085.0_.._0 54.5085.0_.._0 Dowel fixing 54.5087..._0 54.5087..._0 54.5087..._0 54.5087..._0 54.5087..._0 54.5087..._0 54.5087..._0 37 2 Standard position for the dowels 256 0 352 4 448 512 = AV = Extension loss AV AV 87 87 97 97 97 117 117 0 = Profile packaging, 100 per box 1 = Pair packaging, 25 per box 2 = Pairs fastened with adhesive tape, 25 per box 3 = Bagged pairs, 25 per box with screws 5 = Bagged pairs, 25 per box without screws = Available colours: 1 =White Ral 9010 2 =Brown 3 =Black Ral 9005 4 =Ivory Ral 9001 5 =Beige 6 =Grey Ral 7004 8 =Silver Ral 9006 Screws for this slide series are illustrated on page 37
120 Ball bearing runners for 17 mm groove Greater sidetoside stability Groove dimension 17 mm x 67 mm Fastened to drawer with: chipboard screws premounted 5 mm steel dowels premounted 8 mm nylon dowels premounted 10 mm nylon dowels Drilling position M4 * DR A AV 1 CR 28 Y Y 37 23 CABINET FRONT B HOES GROUP 23 Drawer mm 250 DR = mm CR = mm AV = mm A = mm 133 4 214 246 280 312 344 150 2 214 246 278 310 342 52 58 70 88 100 112 1 101 152 2 214 248 280 312 B = mm 96 128 0 192 256 288 Y = mm / 64 80 96 64 64 64 Holes group 2 3 3 3 4 4 4 Special version only on request Available special version with 44 mm drilling Product codes Dimension scheme 10 Drawer Runner 120 250 mm 54.5120.07.150.00 mm 54.5120.07.2.00 mm mm 54.5120.07.214.00 54.5120.07.246.00 8.5 17 mm 54.5120.07.278.00 mm 54.5120.07.310.00 mm 54.5120.07.342.00 67 Screws for this slide series are illustrated on page 37 19
135 35 mm ball bearing runners Fastened to drawer with chipboard screws Sliding on steel ball bearings Greater sidetoside stability Unlocking device Mounting hole position TRAVE 2 2 AV 37 B A E D C 35 37 Runner = mm 650 Travel 206 254 302 381 420 453 495 B C D 295 345 395 445 495 545 595 645 96 96 96 96 96 96 0 192 256 288 0 0 0 0 E 4 448 480 F 96 128 0 176 192 256 288 G 128 144 0 192 256 288 AV 94 96 98 100 119 130 147 155 G F 48 9.5 Product codes Dimension scheme Runner 135 54.5135.0_..00 54.5135.0_..00 54.5135.0_..00 54.5135.0_..00 54.5135.0_..00 54.5135.0_..00 54.5135.0_..00 54.5135.0_.650.00 35 7 = Zincate 3 = Black Pair packaging: 20 per box 12,7 20 Screws for this slide series are illustrated on page 37
135K Ball bearing slides for pullout shelf Fastened to drawer with chipboard screws Sliding on steel ball bearings Stopping device Unlocking device Mounting hole position 28,5 15,8 12,7 25 38 TRAVE Runner = mm Travel B C D E AV C 37 194 244 294 344 394 444 494 299 349 399 449 499 549 599 288 0 384 4 480 480 192 256 288 352 384 448 512 38 24 42 28 46 106 106 106 106 106 106 106 69 D E B AV Product codes Dimension scheme Runner 135 K 54.5135.0_.30K.00 54.5135.0_.35K.00 54.5135.0_.40K.00 54.5135.0_.45K.00 54.5135.0_.50K.00 54.5135.0_.55K.00 KIT details: 1 Drawer runner dx 1 Drawer runner sx 4 Brackets 4 Flat head screws M4 8 Selftapping screws (4x15) 35 10 15.8 55.4 59.9 71.1 82.3 93.5 7 = Zincate 3 = Black Pair packaging: 10 per box Screws for this slide series are illustrated on page 37 21
145 45 mm ball bearing runners Fastened to drawer with chipboard screws Progressive full extension ball bearing runners Sliding on steel ball bearings Unlocking device Mounting hole position TRAVE 2 2 37 9.5 G B E D F C 64 37 48 35 Runner = mm 250 650 700 Travel 250 650 700 B C D 245 295 345 395 445 495 545 595 645 695 148 288 352 352 352 352 352 352 E 4 4 480 544 544 F 176 96 128 0 0 192 256 288 288 G 128 128 0 192 256 288 0 H 81 H Product codes Dimension scheme Runner 145 54.5145.0_..00 54.5145.0_..00 54.5145.0_..00 54.5145.0_..00 54.5145.0_..00 54.5145.0_..00 54.5145.0_..00 54.5145.0_.650.00 54.5145.0_.700.00 45,7 7 = Zincate 3 = Black Pair packaging: 10 per box 12,7 22 Screws for this slide series are illustrated on page 37
PDF Sliding door system Fastened to drawer with chipboard screws They allow doors to slide in the cabinet Sliding on steel ball bearings Mounting hole position T 0 B 0 12,7 12,7 12,7 25,5 12,7 12,7 A 12,7 KIT details: 1 Higher drawer runner 1 ower drawer runner 2 Connectores verticales 2 Eccentrics 4 Countersunk screws 4 MA for mounting plates 6 Flat screws 4 MA for bars 8 Selftapping screws 4x15 Assembling instructions 22,5 Runner = mm Travel A (mm) B (mm) 10 60 75 Depth of the cabinet T 3 366 4 466 5 64 128 0 Sliding of the door back into the cabinet Hights of the cabinet C (mm) S (mm) 40 S 25 min. 25 min. C H min.= C+50 588.5 620.5 652.5 684.5 7.5 748.5 780.5 812.5 455.5 487.5 519.5 551.5 583.5 615.5 647.5 679.5 Mounting Plate Hinge Product codes Runner PDF 54.5PDF.0_..00 54.5PDF.0_..00 54.5PDF.0_..00 54.5PDF.0_..00 54.5PDF.0_..00 7 = Zincate 3 = Black Packaging: 10 KIT per box FGV hinges suggested: 51MS150508000 520201M502100 Screws for this slide series are illustrated on page 37 23
Assembly machines for R82 runners This machine permits mounting the steel slides on the drawers sides,wooden made or similar. The slides can be also mounted on the already assembled drawer sides. No screwing is required by the operator: the slide is fixed by means of pneumatic power, pedal controlled. A practical system of mechanical locating stops permits a rapid and accurate mounting. The machine is equipped with safety devices. Two version are available : one head (type MAC 2) and two heads (type FAST). On request, both versions can be equipped with a cabinet base. FAST Pneumatic pliers MAGO Pneumatic pliers allowing assembly of the steel slides on to the drawers sides, wooden made or similar. By simply pressing a pushbutton, you can get the tab folded and fastened to the drawers. The ergonomic position of the pushbutton and the possibility to hang up the pliers by means of an elastic cable, permit quick and easy operation. 24
551 651 681 751 781 851 881 MAC3 MAC1 Metal Drawers Once you have tried Formenti & Giovenzana s metal drawers, you won t want to look anywhere else. Our manufacturing techniques provide the best performance. Silent and resistant to 40 Kg load capacity, these drawers are constantly tested to make sure they meet our design criteria. Special attention has been paid to simplification and to reduced assembly time. Nontoxic, high density epoxypowder treatment guarantees extraordinarily smooth and silent operation. 25
551 Metal drawer H 53 mm Selfclosing system Antinoise epoxypowder treatment Front vertical adjustment ± 1.5 mm Int. front bracket mm Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Fixing holes positions and drilling pattern Front and back drilling pattern Base width + 14 mm. 270 Min. 14 mm. Min. 12 mm. 46,5 Min. 28 mm. 11 Min. 45 mm. 10 10 BACK 21.5 Bottom width 15 Internal cabinet Back width = Bottom width Base length and adjustments FRONT 26 FRONT Nominal 270 mm mm mm mm mm mm Bottom length Base 268 mm 348 mm 398 mm 448 mm 498 mm 548 mm BACK Accessories for these drawer ranges are illustrated on page 35 37 8.5 int. 31mm Internal width cabinet Drawer 510 codes Screw fixing 58.0551.0_.270.00 58.0551.0_..00 58.0551.0_..00 58.0551.0_..00 58.0551.0_..00 58.0551.0_..00 10 Dowel fixing 58.0561.0_.270.00 58.0561.0_..00 58.0561.0_..00 58.0561.0_..00 58.0561.0_..00 58.0561.0_..00 7 7 Bottom Width Min. 14 mm. = Available colours: 1 =White Ral 9010 6 =Grey Ral 7004 8 =Silver Ral 9006 Pair packaging, 10 per box Available also with unassembled brackets
Keyhole attachment, metal drawer H 85 mm Selfclosing system Antinoise epoxypowder treatment Front vertical adjustment ± 2 mm Int. front bracket mm Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Front and back drilling pattern Fixing holes positions and drilling pattern Base width + 14 mm. Min. 30 mm. 10 10 BACK 12 78.5 Min.77 mm. 37.5 Bottom width 15 Internal cabinet Min. 28 mm. Back width = Bottom width FRONT 11 9 Base length and adjustments int. 31mm 26 7 7 Bottom Width Min. 30 mm. FRONT FRONT BACK Drawer codes Screw fixing 58.0.0_..00 58.0.0_..00 58.0.0_..00 = Available colours: 1 =White Ral 9010 6 =Grey Ral 7004 8 =Silver Ral 9006 Pair packaging, 10 per box Nominal mm mm mm Base 398 mm 448 mm 498 mm Accessories for these drawer ranges are illustrated on page 35 37 27
651681 Metal drawers H 85 mm Selfclosing system Antinoise epoxypowder treatment Front vertical adjustment ± 1.5 mm Front horizontal adjustment ± 1.5 mm Int. front bracket 64 mm Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Fixing holes positions and drilling pattern Front and back drilling pattern 10 10 BACK 10 Min. 77 mm. 37.5 270 Back width = Bottom width FRONT 64 7 Bottom Width 7 Min. 14 mm. Base length Adjustments Nominal Base FRONT Bottom length BACK 270 mm mm mm mm mm mm 268 mm 348 mm 398 mm 448 mm 498 mm 548 mm 1,5 1,5 28
Drawer 651 Drawer 681 machine fixing MAC3 Base width + 14 mm. Base width + 14 mm. Min. 12 mm. 78.5 Min. 12 mm. 78.5 Bottom width 15 Bottom width 15 min. 6 11 11 Min. 28 mm. Min. 28 mm. Min. 14 mm. Min. 14 mm. * The machine MAC3 is illustrated in page 34 of this catalogue Drawer 651 fixing dimensions Drawer 681 fixing dimensions Internal cabinet Internal cabinet 8.5 int. 31mm Internal cabinet min. 2.5 int. 31mm 12 Drawer 651 codes Drawers 681 codes mounting with machine Screw fixing 58.065_.0_.27G.00 58.065_.0_.35G.00 58.065_.0_.40G.00 58.065_.0_.45G.00 58.065_.0_.50G.00 58.065_.0_.55G.00 Dowel fixing 58.066_.0_.27G.00 58.066_.0_.35G.00 58.066_.0_.40G.00 58.066_.0_.45G.00 58.066_.0_.50G.00 58.066_.0_.55G.00 = Available colours: 1 =White Ral 9010 6 =Grey Ral 7004 8 =Silver Ral 9006 Pair packaging, 10 per box Available also with unassembled brackets Dowel fixing 58.0681.0_.27G.00 58.0681.0_.35G.00 58.0681.0_.40G.00 58.0681.0_.45G.00 58.0681.0_.50G.00 58.0681.0_.55G.00 1 = With bracket premounted 0 = Without bracket premounted Full extension kit available for drawers mm. length Accessories for these drawer ranges are illustrated on page 35 37 29
751781 Metal drawers H 117 mm Selfclosing system Antinoise epoxypowder treatment Front vertical adjustment ± 1.5 mm Front horizontal adjustment ± 1.5 mm Int. front bracket 64 mm Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Fixing holes positions and drilling pattern Front and back drilling pattern 10 10 BACK 26 Min. 109 mm. 37.5 64 270 Back width = Bottom width FRONT 64 7 Bottom Width 7 Min. 30 mm. Base length Adjustments Nominal Base FRONT Bottom length BACK 270 mm mm mm mm mm mm 268 mm 348 mm 398 mm 448 mm 498 mm 548 mm 1,5 1,5 30
Drawer 751 Drawer 781 machine fixing MAC3 Base width + 14 mm. Base width + 14 mm. Min. 12 mm. 110.5 Min. 12 mm. 110.5 Bottom width 15 Bottom width 15 min. 6 11 11 Min. 28 mm. Min. 28 mm. Min. 30 mm. Min. 30 mm. * The machine MAC3 is illustrated in page 34 of this catalogue Drawer 751 fixing dimensions Drawer 781 fixing dimensions Internal cabinet Internal cabinet 8.5 int. 31mm Internal cabinet min. 2.5 int. 31mm 12 Drawers 751 codes Drawers 781 codes mounting with machine Screw fixing 58.075_.0_.27G.00 58.075_.0_.35G.00 58.075_.0_.40G.00 58.075_.0_.45G.00 58.075_.0_.50G.00 58.075_.0_.55G.00 Dowel fixing 58.076_.0_.27G.00 58.076_.0_.35G.00 58.076_.0_.40G.00 58.076_.0_.45G.00 58.076_.0_.50G.00 58.076_.0_.55G.00 = Available colours: 1 =White Ral 9010 6 =Grey Ral 7004 8 =Silver Ral 9006 Pair packaging, 10 per box Available also with unassembled brackets Dowel fixing 58.0781.0_.27G.00 58.0781.0_.35G.00 58.0781.0_.40G.00 58.0781.0_.45G.00 58.0781.0_.50G.00 58.0781.0_.55G.00 1 = With bracket premounted 0 = Without bracket premounted Full extension kit available for drawers mm. length Accessories for these drawer ranges are illustrated on page 35 31 31
8581 Metal drawers H 150 mm Selfclosing system Antinoise epoxypowder treatment Front vertical adjustment ± 1.5 mm Front horizontal adjustment ± 1.5 mm Int. front bracket 64 mm Fastened to drawer with: chipboard screws Euro screws premounted 10 mm dowels premounted 8 mm dowels Fixing holes positions and drilling pattern Front and back drilling pattern 10 10 BACK 64 Min. 141 mm. 64 270 Back width = Bottom width 37.5 FRONT 42 7 7 Bottom Width Min. 46 mm. Base length Adjustments Nominal Base FRONT Bottom length BACK 270 mm mm mm mm mm mm 268 mm 348 mm 398 mm 448 mm 498 mm 548 mm 1,5 1,5
Drawer 851 Drawer 881 machine fixing MAC3 Base width + 14 mm. Base width + 14 mm. Min. 12 mm. 142.5 Min. 12 mm. 142.5 Bottom width 15 Bottom width 15 min. 6 11 11 Min. 28 mm. Min. 28 mm. Min. 46 mm. Min. 46 mm. * The machine MAC3 is illustrated in page 34 of this catalogue Drawer 851 fixing dimensions Drawer 881 fixing dimensions Internal cabinet Internal cabinet 8.5 int. 31mm Internal cabinet min. 2.5 int. 31mm 12 Drawers 851 codes Drawers 881 codes mounting with machine Screw fixing 58.085_.0_.27G.00 58.085_.0_.35G.00 58.085_.0_.40G.00 58.085_.0_.45G.00 58.085_.0_.50G.00 58.085_.0_.55G.00 Dowel fixing 58.086_.0_.27G.00 58.086_.0_.35G.00 58.086_.0_.40G.00 58.086_.0_.45G.00 58.086_.0_.50G.00 58.086_.0_.55G.00 = Available colours: 1 =White Ral 9010 6 =Grey Ral 7004 8 =Silver Ral 9006 Pair packaging, 10 per box Available also with unassembled brackets Dowel fixing 58.0881.0_.27G.00 58.0881.0_.35G.00 58.0881.0_.40G.00 58.0881.0_.45G.00 58.0881.0_.50G.00 58.0881.0_.55G.00 1 = With bracket premounted 0 = Without bracket premounted Full extension kit available for drawers mm. length Accessories for these drawer ranges are illustrated on page 35 37 33