2824B: Implementing Microsoft Internet Security and Acceleration Server 2004 Microsoft Virtual PC Classroom Setup Guide
Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, places or events is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. The names of manufacturers, products, or URLs are provided for informational purposes only and Microsoft makes no representations and warranties, either expressed, implied, or statutory, regarding these manufacturers or the use of the products with any Microsoft technologies. The inclusion of a manufacturer or product does not imply endorsement of Microsoft of the manufacturer or product. Links are provided to third party sites. Such sites are not under the control of Microsoft and Microsoft is not responsible for the contents of any linked site or any link contained in a linked site, or any changes or updates to such sites. Microsoft is not responsible for webcasting or any other form of transmission received from any linked site. Microsoft is providing these links to you only as a convenience, and the inclusion of any link does not imply endorsement of Microsoft of the site or the products contained therein. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. 2005 Microsoft Corporation. All rights reserved. Microsoft, MSDN, PowerPoint, Windows, Windows NT, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are property of their respective owners.
Microsoft Virtual PC Classroom Setup Guide iii Contents Introducing Microsoft Virtual PC 2004...1 Setup Overview...2 Software Version Support...2 Classroom Requirements...3 Classroom Configuration...4 Instructor Computer Checklist...5 Instructor Computer Setup...6 1. Install Virtual PC...6 2. Install the virtual disk files...6 3. Create a desktop shortcut for Virtual PC...8 4. Add virtual machines...8 5. Activate virtual machines...9 6. Set VHD files to read-only...11 7. Create a setup share...11 8. Install courseware fonts...12 9. Install the PowerPoint slides...12 Student Computer Checklist for Modules 1-10...13 Student Computer Setup for Modules 1-10...14 1. Install Virtual PC...14 2. Copy the virtual disk files...14 3. Create a desktop shortcut for Virtual PC...15 4. Create the virtual machines...15 Additional Checklist for Modules 11-13...16 1. Copy the virtual disk files...17 2. Connect the student computer pairs...17 3. Create the virtual machines...17
Microsoft Virtual PC Classroom Setup Guide 1 Introducing Microsoft Virtual PC 2004 This course is designed using Microsoft Virtual PC 2004. Virtual PC is a technology that allows a single computer to act as a host for one or more virtual machines. The virtual machines use a set of virtual devices that might or might not map to the physical hardware of the host computer. The software that is installed onto the virtual machine is unmodified, fullversion, retail software that operates exactly as it does when it is installed onto physical hardware. The following definitions will help you with the remainder of this document:! Virtual PC: An application from Microsoft that allows you to install and run other operating systems. Virtual PC does not ship with this course, but it can be acquired from your MSDN subscription, or can be purchased retail.! Host computer: The physical computer onto which an operating system and the Virtual PC application have been installed.! Host operating system: The operating system that is running on the physical computer.! Virtual machine: The computer that is running inside of Virtual PC. In this document, Virtual PC refers to the application running on the host, while virtual machine refers to the guest operating system and any software that is running inside of the Virtual PC application.! Guest operating system: The operating system that is running inside the virtual machine.! Host key: The key that is designated to take the place of the CTRL+ALT combination when logging on to Microsoft Windows. By default, the host key is the ALT key on the right side of the keyboard HOST+DELETE means RIGHT-ALT+DELETE. The host key can be changed by clicking the File menu in the Virtual PC console, and selecting Options. See Virtual PC online help for other uses of the host key. By default, the virtual machine will run inside a window on the host computer s desktop. However, you can run the virtual machine in full screen mode by pressing HOST+ENTER. Using the same key combination, you can return to a windowed view. Note Pressing CTRL+ALT+DELETE while working with a virtual machine will display the Windows Security dialog box for the host operating system. If this is not desired, press ESC. To access the Windows Security dialog box for a guest operating system, press HOST+DELETE. This is the only difference in the way the software works in a virtual machine. You can configure virtual machines to communicate with the host computer, other virtual machines on the same host computer, other host computers, virtual machines on other host computers, other physical computers on the network, or any combination thereof. The setup instructions that you will follow as a part of this classroom setup guide will configure Virtual PC and the virtual machines that will run on the host. Changing any of the configuration settings might render the labs for this course unusable.
2 Microsoft Virtual PC Classroom Setup Guide Setup Overview The classroom setup for this course includes two components. The first classroom setup prepares the instructor and student computers for the first 10 modules of the course. After these modules have been completed, the second classroom setup will reuse most of the virtual machines that were used in the first 10 modules but will also add six more virtual machines that will be used to implement Microsoft Internet Security and Acceleration (ISA) Server Enterprise Edition in Modules 11-13. To complete the classroom setup, expand and activate all the virtual machines on the instructor computer. Then copy the required virtual machines for Modules 1-10 to the student computers. After these modules have been completed, copy the virtual machines and virtual PC configuration files required for the last three modules to the student computers. For the first 10 modules, each host computer for the student or instructor will contain the same virtual machines, except for Demo-ISA-01. The Demo-ISA-01 virtual machine must be installed only on the instructor computer. These virtual machines will be able to communicate with each other by using the Virtual PC virtual switch. While all of the host computers can be configured to communicate with each other and the Internet, the virtual machines will not be able to communicate with other host computers or the virtual machines running on them. For Modules 11-13, the student host computers must be connected together in pairs. The student host computer pairs must be able to communicate with each other, but must remain isolated from the other student computers. You can implement this configuration by connecting the two student computers using a cross-over network cable, or by connecting the two students to a dedicated hub. The host computers must be set up with the default installation of Windows XP Professional. The host computers do not need to be able to communicate with each other on the network during the first 10 modules; however, allowing them to communicate with each other or with the Internet is not detrimental to the course and can be done at the discretion of the user. You should make note of the administrator name and password and provide this to the instructor. We recommend that you use an account named Student with lesser permissions on the student computers. Provide that user name and password to the student for the their use. Note The student computers must be able to access the instructor computer during the classroom setup. Software Version Support The manual setup guide has been developed and tested on the full retail versions of the operating system and any applications to be installed on the classroom computers. Technical support for classroom setup requires that you use the full retail versions of the operating system and any applications to be installed on the classroom computers. Virtual machines have been built and tested in Microsoft Virtual PC 2004.
Classroom Requirements Microsoft Virtual PC Classroom Setup Guide 3 This course requires a classroom with a minimum of one computer for the instructor and one for each student. Before class begins, install and configure all computers by using the following information and instructions. Hardware Level 4 The classroom computers require the following hardware and software configuration.! Pentium III 1 gigahertz (GHz)! PCI 2.1 bus! 1 gigabyte (GB) of RAM! 40-GB hard disk! Digital video disc (DVD) player! Non-ISA network adapter: 10/100 megabits per second (Mbps) required full duplex! 4-megabyte (MB) video adapter! Super VGA (SVGA) monitor (17 inch)! Microsoft Mouse or compatible pointing device! Sound card with amplified speakers Important The instructor computer requires a 40-GB hard disk to complete the classroom setup for this course. In addition, the instructor computer must be connected to a projection display device that supports SVGA 800 x 600, 256 colors. Software Please note that, unless otherwise indicated, this software is not included on the Instructor Materials DVD. This course was developed and tested on the following software, which is required for the classroom computers:! Windows XP Professional or Windows 2000 Professional! Virtual PC 2004! Microsoft PowerPoint 2002 (instructor computer only)
4 Microsoft Virtual PC Classroom Setup Guide Classroom Configuration The following configuration and naming conventions are used throughout this course and are required for the hands-on labs. The following table shows the name of each computer used in the lab exercises. It also shows IP addresses, domain names, and the names of the virtual disks that correspond to the computers. Computer name IP address Domain name Disk name Den-DC-01 192.168.1.10 cohovineyard.com 2824_Den-DC-01.vhd Den-Web-01 172.16.1.11 Standalone workgroup 2824_Den-Web-01.vhd 172.16.1.12 Demo-ISA-01 192.168.1.1 131.107.1.100 172.16.1.1 Den-ISA-01 192.168.1.1 131.107.1.100 172.16.1.1 Den-ISA-02 192.168.1.2 131.107.1.101 cohovineyard.com cohovineyard.com Standalone workgroup 2824_ Den-ISA-01.vhd 2824_ Den-ISA-01.vhd 2824_ Den-ISA-02.vhd Den-MSG-01 192.168.1.12 cohovineyard.com 2824_Den-MSG-1.vhd Den-Clt-01 DHCP cohovineyard.com 2824_ Den-Clt-01.vhd Gen-Web-01 131.107.1.200 131.107.1.201 Standalone workgroup 2824_Gen-Web-01.vhd Den-CSS-01 192.168.1.20 cohovineyard.com 2824_Den-CSS-01.vhd Demo-CSS-01 192.168.1.22 cohovineyard.com 2824_Demo-CSS- 01.vhd Den-ISAEE-01 172.16.1.1 192.168.1.1 192.168.0.1 Den-ISAEE-02 172.16.1.2 192.168.1.2 192.168.0.2 Den-ISAEE-03 131.107.1.103 172.16.1.13 RO-ISAEE-01 131.107.1.110 192.168.2.1 cohovineyard.com cohovineyard.com Standalone workgroup Standalone workgroup 2824_Den-ISAEE- 01.vhd 2824_Den-ISAEE- 02.vhd 2824_Den-ISAEE- 03.vhd 2824_RO-ISAEE- 04.vhd All disks are differencing disks, with the exceptions of Base04A.vhd and BASE04C.vhd. These disks are the parent disks for all differencing disks and must not be modified for any reason. Doing so will result in the failure of all other disks. Estimated time to set up the classroom: 6 hours
Microsoft Virtual PC Classroom Setup Guide 5 Instructor Computer Checklist " 1. Install Virtual PC. " 2. Install the virtual disk files. " 3. Create a desktop shortcut for Virtual PC. " 4. Add virtual machines. " 5. Activate virtual machines. " 6. Set VHD files to read-only. " 7. Create a setup share. " 8. Install courseware fonts. " 9. Install the PowerPoint slides.
6 Microsoft Virtual PC Classroom Setup Guide Instructor Computer Setup Use the instructions in the following section to set up the classroom manually. Before you start the installation of the instructor computer, Windows XP Professional must be installed on the computer. PowerPoint 2002 must also be installed. Important The operating systems installed on the virtual machines in this course have not been activated. To receive product keys that will activate the virtual machines, you must contact Microsoft Learning at mslpkd@microsoft.com, and include your program ID number in your e-mail. It might take up to 24 hours to receive a response. (It is not necessary to contact Microsoft Learning if you have already done so for another course.) You will use the product keys to activate all virtual machines that you receive from Microsoft Learning. You will only need one key for each operating system. For more information, please see the Virtual PC Deployment Guide section of the following Microsoft Certified Trainer (MCT) secure site: https://partnering.one.microsoft.com/mct/vpc/default.aspx. 1. Install Virtual PC Install Virtual PC. Note If Virtual PC 2004 is already installed, you may skip this step. 1. Insert the Microsoft Virtual PC 2004 Compact Disc into the CD-ROM drive. 2. If autorun is disabled, navigate to the root of the compact disc and doubleclick Setup.exe. 3. On the Welcome to the Installation Wizard for Microsoft Virtual PC 2004 page, click Next. 4. On the License Agreement page, select I accept the terms in the license agreement and then click Next. 5. In the Customer Information page, enter a User Name, Organization, and the product key for your version of Virtual PC, and then click Next. 6. On the Ready to Install the Program page, click Install. 7. On the Installation Completed page, click Finish. 2. Install the virtual disk files Install the virtual machine hard disks by running the self-extracting files in the drives folder on the Instructor DVD. 1. Insert the instructor DVD. If the DVD autorun launches the Course 2824 (Trainer) EULA dialog box, click Exit and then click Yes. 2. Double-click Base04A.exe in the \Setup\Drives folder of the Instructor DVD. Note If you experience long delays when opening the files from the DVD, copy the files to your local hard disk, and open the files from there.
Microsoft Virtual PC Classroom Setup Guide 7 3. In the Official Microsoft Learning Products End-User License Agreement window, click Accept to indicate that you accept the terms in the license agreement. 4. In the WinRAR self-extracting archive window, in the Destination folder text box, ensure that C:\Program Files\Microsoft Learning\Base is listed, and then click Install. Please wait while the base virtual hard disk file is extracted. This might take a few minutes. 5. Repeat steps 2 4 to install the Base04C.exe file. 6. Double-click 2824_Den-DC-01.exe in the setup\drives folder of the Instructor DVD. 7. In the End User License Agreement window, click Accept to indicate that you accept the terms in the license agreement. 8. In the WinRAR self-extracting archive window, in the Destination folder text box, ensure that C:\Program Files\Microsoft Learning\2824\Drives is listed in the Destination folder text box, and then click Install. Please wait while the base virtual hard disk file is extracted. This might take a few minutes. 9. Repeat steps 6 8 to install the following files: 2824_Den-Web-01.exe 2824_Den-ISA-01.exe 2824_Den-ISA-02.exe 2824_Den-MSG-01.exe 2824_Den-Clt-01.exe 2824_Gen-Web-01.exe 2824_Demo-ISA-01.exe 2824_Den-ISAEE-01.exe 2824_Den-ISAEE-02.exe 2824_Den-ISAEE-03.exe 2824_Den-CSS-01.exe 2824_Demo-CSS-01.exe 2824_RO-ISAEE-01.exe
8 Microsoft Virtual PC Classroom Setup Guide 3. Create a desktop shortcut for Virtual PC Create a shortcut for Virtual PC on the desktop. 4. Add virtual machines Use the New Virtual Machine Wizard to add the virtual machine to the Virtual PC console. 1. Navigate to C:\Program Files\Microsoft Virtual PC. 2. Right-click Virtual PC.exe and drag it to the desktop. (The file name will be Virtual PC.exe if you are using a full version.) 3. Click Create Shortcuts Here on the shortcut menu. 1. Double-click the Virtual PC shortcut on the desktop. 2. On the Welcome to the New Virtual Machine Wizard page, click Next. (If the wizard does not automatically start, click New.) 3. On the Options page, select Add an existing virtual machine, and then click Next. 4. In the Name and location box, type C:\Program Files\Microsoft Learning\2824\Drives\Den-DC-01.vmc, and then click Next. 5. In the New Virtual Machine Wizard dialog box, click Finish. 6. In the Settings for Den-DC-01 dialog box, click Networking, verify that the drop-down list next to each active adapter is set to Local only, and then click OK. Important Do not change the RAM allocation for the virtual machine. Doing so might cause the lab exercises or practices to become unstable or to cease functioning. Also, do not change the number of network adapters configured for each virtual machine. 7. Repeat steps 2 6 for the following virtual machines: Den-Web-01.vmc Den-ISA-01.vmc Den-ISA-02.vmc Den-MSG-01.vmc Den-Clt-01.vmc Gen-Web-01.vmc Den-ISAEE-01.vmc Den-ISAEE-02.vmc Den-ISAEE-03.vmc Den-CSS-01.vmc Demo-CSS-01.vmc RO-ISAEE-01.vmc Demo-ISA-01.vmc
Microsoft Virtual PC Classroom Setup Guide 9 5. Activate virtual machines Activate Windows operating systems within the virtual machines. Note We recommend that after activating the virtual machines, you save them, so that in the future, you can set up the classroom without needing to activate them again. Note This section requires the use of the product keys supplied by Microsoft Learning. For instructions on obtaining these product keys, see the Important note at the beginning of the Instructor Computer Setup section. 1. In the Virtual PC console, select Den-DC-01, and then click Start. 2. Logon to the virtual machine as Administrator with a password of P@ssw0rd. Note Pressing CTRL+ALT+DELETE while working with a virtual machine will display the Windows Security dialog box for the host operating system. To log on to the guest operating system running in the virtual machine, press RIGHT-ALT+DELETE. 3. In the Windows Product Activation alert box, click Yes. 4. On the Let s activate Windows page, select Yes, I want to telephone a customer service representative to activate Windows, and then click Next. 5. On the Activate Windows by phone page, click Change Product Key. Note You might need to scroll the window down to reveal the buttons. 6. On the Change Product Key page, enter the course specific-product key as provided by Microsoft Learning, and then click Update. 7. On the Activate Windows by phone page, in the Step 1 drop-down list box, select your location. 8. Dial the telephone number that is displayed in Step 2. 9. Follow the telephone instructions to activate Windows. This will take a few minutes. 10. After logon completes, in the Virtual PC window, from the Action menu, select Close. 11. In the Close window, select <Shut down Windows Server 2003 and save changes> or <Shut down Windows XP and save changes>, verify that Commit changes to the virtual hard disk is selected, and then click OK.
10 Microsoft Virtual PC Classroom Setup Guide 12. Repeat steps 1 11 for each of the following.vmc files. Den-Web-01.vmc Den-ISA-01.vmc Den-ISA-02.vmc Den-MSG-01.vmc Den-Clt-01.vmc Gen-Web-01.vmc Den-ISAEE-01.vmc Den-ISAEE-02.vmc Den-ISAEE-03.vmc Den-CSS-01.vmc Demo-CSS-01.vmc RO-ISAEE-01.vmc Demo-ISA-01.vmc (Demo-ISA-01 is available only on the instructor computer.) Note The Web server certificate on Den-Web-01 expires on July 19, 2006. If you are setting up the classroom after that date, then you must obtain a new certificate for the Web server. To obtain the certificate, complete the following procedure. These steps are only required after July 19, 2006. 1. Start the Den-DC-01 and the Den-Web-01 virtual machines and log on as an administrator. 2. On Den-Web-01, modify the network adapter properties to use an IP address of 192.168.1.11. 3. Create a custom MMC and load the Certificates snap-in. Expand Personal, expand Certificates. Delete the certificate issued to Den-Web-01.cohovineyard.com. Close the MMC without saving changes. 4. Open Internet Explorer and connect to http://den-dc-01/ certsrv. 5. Log in as cohovineyard\administrator with a password of P@ssw0rd. 6. On the Welcome page, under Select a task, click Request a certificate. 7. On the Request a Certificate page, click advanced certificate request. 8. On the Advanced Certificate Request page, click Create and submit a request to this CA.
Microsoft Virtual PC Classroom Setup Guide 11 6. Set VHD files to read-only Set the read-only attribute on the base VHD files. 7. Create a setup share Share virtual machine files for installing on student computers. 9. On the Advanced Certificate Request page, in the Certificate Template drop-down list, click Web Server. Complete the form using the following information: Name: Den-Web-01.cohovineyard.com E-Mail: Administrator@cohovineyard.com Company: Coho Vineyard Department: IT City: Denver State: Colorado Country/Region: US 10. Under Key Options, select Store Certificate in the local computer certificate store, 11. Submit the request by clicking Submit. Review the two warning dialog boxes that appear, and click Yes for both. 12. Click Install this certificate. Review the warning dialog box that appears, and then click Yes. When you receive the message that the certificate is successfully installed, close Internet Explorer. 13. Modify the network adapter properties on Den-Web-01 to use an IP address of 172.16.1.11 and 172.16.1.12. 14. Shut down and save changes on both Den-Web-01 and Den-DC-01. 1. Navigate to C:\Program Files\Microsoft Learning\Base. 2. Right-click the Base04A.vhd file, and then click Properties. 3. Under Attributes, select the Read-only check box, and then click OK. 4. Right-click the Base04C.vhd file, and then click Properties. 5. Under Attributes, select the Read-only check box, and then click OK. 1. In Windows Explorer, create a new folder in the C:\Program Files\ Microsoft Learning\2824 folder, and name it 2824_Drives. 2. Copy all files from the C:\Program Files\Microsoft Learning\2824\Drives folder to the 2824_Drives folder. 3. Copy all files from the C:\Program Files\Microsoft Learning\Base folder to the 2824_Drives folder. 4. Copy the ISAEEInstall.img file from the Instructor DVD to the 2824_Drives folder. 5. Right-click C:\Program Files\Microsoft Learning\2824\2824_Drives, and then click Sharing (on Windows 2000 Professional) or Sharing and Security (on Windows XP). 6. On the Sharing tab, select Share this Folder, type 2824_Drives in the Share name text box, and then click OK.
12 Microsoft Virtual PC Classroom Setup Guide 8. Install courseware fonts Install courseware fonts by running fonts.msi. 9. Install the PowerPoint slides Install the PowerPoint slides by running 2824_ppt.msi. 1. Click Start, and then click Run. 2. In the Run box, type x:\tools\fonts.exe (where x is the drive letter of your DVD-ROM drive), and then click OK. 3. In the Courseware fonts dialog box, click Yes. 4. In the Courseware fonts message box, click OK. 1. Click Start, and then click Run. 2. In the Run dialog box, type x:\tools\2824_ppt.msi (where x is the drive letter of your DVD-ROM drive), and then click OK.
Microsoft Virtual PC Classroom Setup Guide 13 Student Computer Checklist for Modules 1-10 " 1. Install Virtual PC. " 2. Copy the virtual disk files. " 3. Create a desktop shortcut for Virtual PC. " 4. Create the virtual machines.
14 Microsoft Virtual PC Classroom Setup Guide Student Computer Setup for Modules 1-10 To set up the student computers, complete the items in the Student Computer Checklist. Caution These instructions assume network connectivity between the instructor computer and the student computers. If you do not have connectivity, we recommend copying the activated virtual machines to the student computers via a burned DVD or a USB drive, for example, to avoid the need to activate the virtual machines on each student computer. If you use the original virtual machines from the Instructor DVD, you will need to activate them on each student computer. 1. Install Virtual PC Install Virtual PC. Note If Virtual PC 2004 is already installed, you may skip this step. See detailed instructions in the Instructor Computer Setup section. 2. Copy the virtual disk files Copy the virtual machine hard disks from the 2824_Drives folder on the instructor computer. Note The following steps require two folders on the student computers: C:\Program Files\Microsoft Learning\2824\Drives and C:\Program Files\ Microsoft Learning\Base. If these folders are not present, create them before continuing. 1. Open a Run command, and connect to the 2824_Drives share on the instructor computer. 2. Copy the following files from the 2824_Drives share to C:\Program Files\ Microsoft Learning\2824\Drives on each student computer: 2824_Den-DC-01.vhd, Den-DC-01.vmc 2824_Den-Web-01.vhd, Den-Web-01.vmc 2824_Den-ISA-01.vhd, Den-ISA-01.vmc 2824_Den-ISA-02.vhd, Den-ISA-02.vmc 2824_Den-Msg-01.vhd, Den-Msg-01.vmc 2824_Den-Clt-01.vhd, Den-Clt-01.vmc 2824_Gen-Web-01.vhd, Gen-Web-01.vmc 3. Copy the following files from the 2824_Drives share to C:\Program Files\ Microsoft Learning\Base on each student computer: Base04C.exe Base04A.exe
Microsoft Virtual PC Classroom Setup Guide 15 3. Create a desktop shortcut for Virtual PC Create a shortcut for Virtual PC on the desktop. 4. Create the virtual machines Register the existing virtual machine files. 1. Navigate to C:\Program Files\Microsoft Virtual PC. 2. Right-click Virtual PC.exe and drag it to the desktop. (The file name will be Virtual PC.exe if you are using a full version.) 3. Click Create Shortcuts Here on the shortcut menu. 1. On the Start menu, point to All Programs, and then click Microsoft Virtual PC. 2. If the New Virtual Machine Wizard is not visible, on the Virtual PC Console window, on the File menu, click New Virtual Machine Wizard. 3. In the New Virtual Machine Wizard page, click Next. 4. On the Options page, click Add an existing virtual machine, and then click Next. 5. On the Existing Virtual Machine Name and Location page, in the Name and location box, type C:\Program Files\Microsoft Learning\2824\ Drives\Den-DC-01.vmc and then click Next. 6. In the New Virtual Machine Wizard dialog box, click Finish. 7. In the Settings for Den-DC-01 dialog box, click Networking. 8. In the Settings for Den-DC-01 dialog box, under Networking, ensure that the drop-down list next to each active adapter is set to Local only, and then click OK. 9. Repeat steps 2 8 for the Den-Web-01.vmc, Den-ISA-01.vmc, Den-ISA-02.vmc, Den-Msg-01.vmc, Den-Clt-01.vmc, and the Gen-Web-01.vmc virtual machines.
16 Microsoft Virtual PC Classroom Setup Guide Additional Checklist for Modules 11-13 After completing the Module 10 lab, complete the following steps to prepare the classroom for Modules 11-13. " 1. Copy the virtual disk files. " 2. Connect the student computer pairs. " 3. Create the virtual machines.
Microsoft Virtual PC Classroom Setup Guide 17 1. Copy the virtual disk files Copy the virtual machine hard disks from the 2824_Drives folder on the instructor computer. 1. For each pair of student computers, identify one student computer as Host1 and the other computer as Host2. 2. On each student computer, open a Run command, and connect to the 2824_Drives share on the instructor computer. 3. On all student computers, create a folder in the C:\Program Files\ Microsoft Learning\2824 folder named Labfiles. 4. On all student computers, copy the ISAEEInstall.iso file from the 2824_Drives share to the C:\Program Files\Microsoft Learning\ 2824\Labfiles folder. 5. On all student computers, delete all files from the C:\Program Files\ Microsoft Learning\2824\Drives folder. 6. On the student computer identified as Host1, copy the following files from the 2824_Drives share to C:\Program Files\Microsoft Learning\2824\ Drives. 2824_Den-DC-01.vhd, Den-DC-01.vmc 2824_Den-CSS-01.vhd, Den-CSS-01.vmc 2824_Den-Web-01.vhd, Den-Web-01.vmc 2824_Den-Msg-01.vhd, Den-Msg-01.vmc 2824_Den-Clt-01.vhd, Den-Clt-01.vmc 7. On the student computer identified as Host2, copy the following files from the 2824_Drives share to C:\Program Files\Microsoft Learning\2824\ Drives. 2824_Demo-CSS-01.vhd, Demo-CSS-01.vmc 2824_Den-ISAEE-01.vhd, Den-ISAEE-01.vmc 2824_Den-ISAEE-02.vhd, Den-ISAEE-02.vmc 2824_Den-ISAEE-03.vhd, Den-ISAEE-03.vmc 2824_RO-ISAEE-01.vhd, RO-ISAEE-01.vmc 2824_Gen-Web-01.vhd, Gen-Web-01.vmc 2. Connect the student computer pairs Connect each pair of student computers. 3. Create the virtual machines Register the existing virtual machine files. Using a cross-over cable or a dedicated hub, connect each pair of student computers to each other. The student computers must be able to communicate with each other, but should not be able to communicate with other student computers in the classroom. 1. On the Student computer identified as Host1, on the Start menu, point to All Programs, and then click Microsoft Virtual PC. 2. If the New Virtual Machine Wizard is not visible, on the Virtual PC Console window, on the File menu, click New Virtual Machine Wizard. 3. In the New Virtual Machine Wizard dialog box, click Next.
18 Microsoft Virtual PC Classroom Setup Guide 4. On the Options page, click Add an existing virtual machine, and then click Next. 5. On the Existing Virtual Machine Name and Location page, in the Name and location box, type C:\Program Files\Microsoft Learning\2824\ Drives\ Den-CSS-01.vmc, and then click Next. 6. In the New Virtual Machine Wizard dialog box, click Finish. 7. In the Settings for Den-CSS-01 dialog box, click Networking. 8. In the Settings for Den-CSS-01 dialog box, under Networking, ensure that the drop-down list next to each active adapter is set to use the physical network card on the host computer that is connected to the cross-over cable or the shared hub, and then click OK. 9. In the Virtual PC Console, click Den-ISA-01, and then click Remove. In the warning message, click Yes. 10. Repeat step 9 and remove the following virtual machine: Gen-Web-01. 11. Click Den-Clt-01 and click Settings. In the Settings for Den-Clt-01 dialog box, under Networking, change the setting for each active adapter to use the physical network card that is connected to the cross-over cable or the shared hub, and then click OK. 12. Repeat step 11 for the Den-DC-01, the Den-Msg-01, and the Den-Web-01 virtual machines. 13. On the Student computer identified as Host2, on the Start menu, point to All Programs, and then click Microsoft Virtual PC. 14. If the New Virtual Machine Wizard is not visible, on the Virtual PC Console window, on the File menu, click New Virtual Machine Wizard. 15. In the New Virtual Machine Wizard dialog box, click Next. 16. On the Options page, click Add an existing virtual machine, and then click Next. 17. On the Existing Virtual Machine Name and Location page, in the Name and location box, type C:\Program Files\Microsoft Learning\2824\ Drives\Den-ISAEE-01.vmc, and then click Next. 18. In the New Virtual Machine Wizard dialog box, click Finish. 19. In the Settings for Den-ISAEE-01 dialog box, click Networking. 20. In the Settings for Den-ISAEE-01 dialog box, under Networking, ensure that the drop-down list next to each active adapter is set to use the physical network card that is connected to the cross-over cable or the shared hub, and then click OK. 21. Repeat steps 14 20 for the Den-ISAEE-02.vmc, Den-ISAEE-03.vmc, Demo-CSS-01.vmc, and the RO-ISAEE-01.vmc virtual machines. 22. In the Virtual PC Console, click Den-CLT-01, and click Remove. In the warning message, click Yes. 23. Repeat step 22 and remove the following virtual PCs: Den-DC-01, Den-ISA-01, Den-ISA-02, Den-Msg-01, and Den-Web-01. 24. Click Gen-Web-01, and click Settings. In the Settings for Gen-Web-01 dialog box, under Networking, change the setting for each active adapter to use the physical network card that is connected to the cross-over cable or the shared hub, and then click OK.