RHF High Efficiency Remote Heat Pumps and Matching Blower Coils

Heating&Air Conditioning RHF High Efficiency Remote Heat Pumps and Matching Blower Coils Amana RHF heat pumps and matching blower coils offer economy, superior heating and cooling comfort, plus installation and service ease. Advanced engineering has created a highly efficient, cubed-coil design. High energy efficiencies combined with reliable Amana components and Amana quality manufacturing, make RHF heat pump units perfect for the homeowner who understands true value. Nominal Cooling Capacities: 24,000 through 48,000 Cooling Efficiency: Up to 16.0 SEER Nominal Heating Capacities: 24,000 through 48,000 Heating Efficiency: Up to 9.0 HSPF Features High Efficiency Scroll Compressor Fewer compressor parts mean less wear and tear to give your unit longer life. Compressor is hermetically sealed and features safeguards to protect it from excessive temperatures, pressure and abnormal electrical currents. In addition, energy-saving design reduces internal resistance and friction and increases operating efficiency. Internal parts are spring isolated, and the entire compressor is mounted on rubber cushions to help absorb vibrations. A heavy gauge sound blanket is factory installed to further reduce sound. Maximum Efficiency and Performance Simplicity of design and construction make this unit economical to operate. The balance of economy and efficiency makes RHF units ideal for replacement or new construction. The RHF line delivers Seasonal Energy Efficiency Ratios (SEER) of up to 16.0 and Heating Season Performances (HSPF) up to 9.0 when paired with high efficiency Amana blower coils which can help reduce your cooling and heating costs. System Protection Compressor internal overload, high pressure switch, and pressure relief valve protects compressor and other components from damage. A low pressure cutout switch has been added on the suction line to detect a loss of refrigerant charge. A protective time delay works to prevent short cycling. A five-minute delay occurs whenever the power supply or the indoor thermostat s signal is interrupted. Quiet Condenser Fan with Vertical Air Discharge Quiet, efficient fan and motor reduce operating sounds and large blades move high volumes of air with lower power requirement. Draw through air flow directs operating sound and hot air away from neighbors, shrubs, and buildings for increased installation versatility. Easy Service Accessibility Solid brass service valves and gauge port angled at 30 with enough clearance to easily and quickly service unit. Service panel swings open at the corner for effective service from two directions. Inside, a pre-wired control panel speeds installation. Minimal quantity of numbered and color-coded wires to assure fast field wiring. Compressor and tubing access from side and top give plenty of internal room for installation and removal of parts. Matched Indoor Blower Coils and A-Coils These coils, in combination with All- Amana systems, make for optimum operating performance and efficiency. Plastic drain pans used on the indoor section are threaded for easy attachment of drain lines. All coils are fully leak tested before leaving the factory. Cabinet The high quality, sheet metal cabinet is painted for a finish that is long lasting and corrosion resistant for years of dependable operation. A premium coil grille adds rigidity to better protect the unit as well as improving appearance. EXCEPTIONAL WARRANTIES 10-YEAR LIMITED COMPRESSOR, OUTDOOR COIL AND INDOOR COIL WITH ALL-AMANA SYSTEM 5-YEAR LIMITED PARTS Coverage can be further enhanced by asking for the EXTENDED SERVICE PLAN Ask your Amana representative for details!! TM Quality Assurance. The Amana name stands for quality - and has for over 50 years. All Amana products are fully tested to meet strict engineering standards and to assure you of a quality product. Every unit is individually leak checked and functionally tested prior to shipment. The ISO 9001 registration is an internationally recognized standard of excellence. Amana s Fayetteville, Tennessee manufacturing facility, which builds this unit, was the first in the heating and air conditioning industry to be awarded this certificate of registration for quality assurance systems, a national standard which is a model for quality systems. UR L C UR L Heating& Air Conditioning Comfort. Quality. Trust.

Specifications: Capacities and Ratings RHF Unit Specifications (24,000-48,000) RHF24A2A RHF30A2A RHF36A2A RHF42A2A RHF48A2A Nominal cooling () 24,000 29,000 36,000 42,000 48,000 S.E.E.R. 14.00 14.00 14.00 14.00 14.00 C.O.P. @47ºF 3.50 3.60 3.50 3.60 3.60 H.S.P.F. (Region IV) 8.30 8.30 8.30 8.30 8.30 Operating Sound Compressor 7.0 7.1 7.3 7.2 7.3 R.L. Amps 11.4 12.2 18.2 20.4 23.5 L.R. Amps 56.0 67.0 83.0 95.0 109.0 Condenser Fan Motor Horsepower 1/12 1/12 1/6 1/6 1/6 R.L. Amps 0.6 0.6 1.1 1.1 1.1 L.R. Amps 1.0 1.0 1.9 1.9 1.9 Refrigerant Lines Liq. Line Fitting ID 3/8 3/8 3/8 3/8 3/8 Suct. Line Fitting ID 3/4 3/4 7/8 7/8 1-1/8 Refrigerant Charge 149.0 oz. 199.0 oz. 243.0 oz. 270.0 oz. 272.0 oz. Wire Sizing Determination NOTE: It is important to electrically connect the unit and properly size fuses/circuit breakers and wires in accordance with all national and/or local electrical codes. Power Characteristics 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 Min. Circuit Ampacity 18.2 15.9 23.7 26.6 30.4 Max. Overcurrent Device 30.0 25.0 40.0 45.0 50.0 Power Supply Conduit Size 1/2" or 3/4" 1/2" or 3/4" 1/2" or 3/4" 1/2" or 3/4" 1/2" or 3/4" Low Voltage 1/2" 1/2" 1/2" 1/2" 1/2" Approx. Shipping Weight (lbs.) 211 230 293 293 298 MODELS Dimensions and Unit Model Number Guide Square Base RHF24A2A 29-1/2 29-1/2 RHF30A2A 29-1/2 29-1/2 RHF36A2A 35-5/8 33-1/2 RHF42A2A 35-5/8 33-1/2 RHF48A2A 35-5/8 33-1/2 R H F 24 A 2 A Product Type Current R: Remote Design Series System Type H: Heat Pump Voltage Product Family 2: 208-230-1-60 F: 14+ SEER (for Heat Pump Marketing Designator Models) A: Standard Line Nominal Capacity 24: 24,000 30: 30,000 36: 36,000 42: 42,000 48: 48,000 2

Cooling Specifications: RHF24A2A / BBA24A2A + CHA30TCC Conditions: 80 ID DB, 67 ID WB @ 800 CFM RHF36A2D / BBA48A2A + CHA42TCC Conditions: 80 ID DB, 67 ID WB @ 1,200 CFM Temp. F. Sensible Latent Watts Temp. F. Sensible Latent Watts 75 26,400 18,480 7,920 1,790 80 26,050 18,496 7,555 1,845 85 25,700 18,504 7,196 1,900 90 25,400 18,542 6,858 1,950 95 25,100 18,574 6,526 2,000 100 24,450 18,460 5,990 2,040 105 23,800 18,326 5,474 2,410 110 22,950 17,672 5,279 2,120 115 22,100 17,017 5,083 2,160 TVA Conditions @ 95 OD DB, 75 ID DB, 63 ID WB 95 23,300 18,407 4,893 1,920 75 38,400 25,728 12,672 2,590 80 37,950 25,806 12,144 2,670 85 37,500 25,875 11,625 2,750 90 37,050 25,935 11,115 2,815 95 36,600 25,986 10,614 2,880 100 35,700 25,883 9,818 2,940 105 34,800 25,752 9,048 3,600 110 33,500 24,790 8,710 3,050 115 32,200 23,828 8,372 3,100 TVA Conditions @ 95 OD DB, 75 ID DB, 63 ID WB 95 33,900 25,764 8,136 2,270 RHF30A2B / BBA36A2A + CHA36TCC Conditions: 80 ID DB, 67 ID WB @ 1,050 CFM RHF42A2A / BBA60A2A + CHA60TCC Conditions: 80 ID DB, 67 ID WB @ 1,400 CFM Temp. F. Sensible Latent Watts Temp. F. Sensible Latent Watts 75 30,500 20,435 10,065 2,160 80 30,100 20,468 9,632 2,225 85 29,700 20,493 9,207 2,290 90 29,350 20,545 8,805 2,350 95 29,000 20,590 8,410 2,410 100 28,300 20,518 7,783 2,460 105 27,600 20,424 7,176 2,950 110 26,550 19,647 6,903 2,550 115 25,500 18,870 6,630 2,590 TVA Conditions @ 95 OD DB, 75 ID DB, 63 ID WB 95 26,900 20,444 6,456 2,320 75 43,600 30,084 13,516 2,970 80 43,050 30,135 12,915 3,060 85 42,500 30,175 12,325 3,150 90 42,000 30,240 11,760 3,230 95 41,500 30,295 11,205 3,310 100 40,450 30,135 10,315 3,375 105 39,400 29,944 9,456 4,200 110 37,950 28,842 9,108 3,500 115 36,500 27,740 8,760 3,560 TVA Conditions @ 95 OD DB, 75 ID DB, 63 ID WB 95 18,200 14,378 3,822 1,460 RHF48A2A / BBA60A2A + CHA60TCC Conditions: 80 ID DB, 67 ID WB @ 1,600 CFM Temp. F. Sensible Latent Watts 75 50,000 34,000 16,000 3,480 80 49,400 34,086 15,314 3,585 85 48,800 34,160 14,640 3,690 90 48,200 34,222 13,978 3,785 95 47,600 34,272 13,328 3,880 100 46,400 34,104 12,296 3,960 105 45,200 33,900 11,300 5,040 110 43,550 32,663 10,888 4,105 115 41,900 31,425 10,475 4,170 TVA Conditions @ 95 OD DB, 75 ID DB, 63 ID WB 95 38500 30,030 8,470 3,180 3

Heating Specifications: RHF24A2A / CHA30TCC / BBA24A2A Conditions: 800 CFM Indoor Air @ 70 db Ambient F. Basic Unit w/o Aux. Heat Capacity Capacity of Unit With Auxiliary Heat C.O.P. 4.8 kw 9.6 kw 14.4 kw 19.2 kw, 24 kw, 28.8 kw 65 29,500 4.16 45,900 62,300 78,700 N/A 60 27,900 4.02 44,300 60,700 77,100 N/A 55 26,300 3.86 42,700 59,100 75,500 N/A 50 24,500 3.69 40,900 57,300 73,700 N/A 45 22,700 3.49 39,100 55,500 71,900 N/A 40 21,100 3.31 37,500 53,900 70,300 N/A 35 19,500 3.12 35,900 52,300 68,700 N/A 30 18,100 2.86 34,500 50,900 67,300 N/A 25 16,700 2.70 33,100 49,500 65,900 N/A 20 15,400 2.55 31,800 48,200 64,600 N/A 15 14,500 2.37 30,900 47,300 63,700 N/A 10 12,500 2.19 28,900 45,300 61,700 N/A 5 11,100 1.99 27,500 43,900 60,300 N/A 0 9,700 1.78 26,100 42,500 58,900 N/A -5 8,300 1.56 24,700 41,100 57,500 N/A -10 6,800 1.31 23,200 39,600 56,000 N/A RHF30A2A / CHA36TCC / BBA36A2A Conditions: 1,000 CFM Indoor Air @ 70 db Ambient F. Basic Unit w/o Aux. Heat Capacity Capacity of Unit With Auxiliary Heat C.O.P. 4.8 kw 9.6 kw 14.4 kw 19.2 kw, 24 kw, 28.8 kw 65 37,000 4.26 53,400 69,800 86,200 N/A 60 35,000 4.12 51,400 67,800 84,200 N/A 55 32,900 3.95 49,300 65,700 82,100 N/A 50 30,800 3.77 47,200 63,600 80,000 N/A 45 28,500 3.57 44,900 61,300 77,700 N/A 40 26,500 3.38 42,900 59,300 75,700 N/A 35 24,400 3.19 40,800 57,200 73,600 N/A 30 22,700 2.64 39,100 55,500 71,900 N/A 25 20,900 2.50 37,300 53,700 70,100 N/A 20 19,300 2.36 35,700 52,100 68,500 N/A 15 17,500 2.20 33,900 50,300 66,700 N/A 10 15,700 2.02 32,100 48,500 64,900 N/A 5 13,900 1.84 30,300 46,700 63,100 N/A 0 12,200 1.65 28,600 45,000 61,400 N/A -5 10,400 8.50 26,800 43,200 59,600 N/A -10 8,500 1.22 24,900 41,300 57,700 N/A RHF36A2A / CHA42TCC / BBA48A2A Conditions: 1,200 CFM Indoor Air @ 70 db Ambient F. Basic Unit w/o Aux. Heat Capacity Capacity of Unit With Auxiliary Heat C.O.P. 4.8 kw 9.6 kw 14.4 kw 19.2 kw 24 kw, 28.8 kw 65 44,700 4.06 61,100 77,500 93,900 110,300 N/A 60 42,300 3.92 58,700 75,100 91,500 107,900 N/A 55 39,800 3.76 56,200 72,600 89,000 105,400 N/A 50 37,200 3.59 53,600 70,000 86,400 102,800 N/A 45 34,500 3.39 50,900 67,300 83,700 100,100 N/A 40 32,000 3.21 48,400 64,800 81,200 97,600 N/A 35 29,500 3.03 45,900 62,300 78,700 95,100 N/A 30 28,300 2.88 44,700 61,100 77,500 93,900 N/A 25 26,100 2.72 42,500 58,900 75,300 91,700 N/A 20 24,000 2.56 40,400 56,800 73,200 89,600 N/A 15 21,900 2.38 38,300 54,700 71,100 87,500 N/A 10 19,600 2.19 36,000 52,400 68,800 85,200 N/A 5 17,400 1.99 33,800 50,200 66,600 83,000 N/A 0 15,200 1.78 31,600 48,000 64,400 80,800 N/A -5 12,900 1.56 29,300 45,700 62,100 78,500 N/A -10 10,600 1.31 27,000 43,400 59,800 76,200 N/A 4

Heating Specifications: (continued) RHF42A2A / CHA60TCC / BBA60A2A Conditions: 1,400 CFM Indoor Air @ 70 db Ambient F. Basic Unit w/o Aux. Heat Capacity Capacity of Unit With Auxiliary Heat C.O.P. 4.8 kw 9.6 kw 14.4 kw 19.2 kw 24 kw, 28.8 kw 65 51,800 4.35 68,200 84,600 101,000 117,400 N/A 60 49,000 4.20 65,400 81,800 98,200 114,600 N/A 55 46,100 4.03 62,500 78,900 95,300 111,700 N/A 50 43,100 3.85 59,500 75,900 92,300 108,700 N/A 45 39,900 3.63 56,300 72,700 89,100 105,500 N/A 40 37,100 3.44 53,500 69,900 86,300 102,700 N/A 35 34,200 3.25 50,600 67,000 83,400 99,800 N/A 30 30,900 3.04 47,300 63,700 80,100 96,500 N/A 25 28,600 2.87 45,000 61,400 77,800 94,200 N/A 20 26,300 2.70 42,700 59,100 75,500 91,900 N/A 15 23,900 2.51 40,300 56,700 73,100 89,500 N/A 10 21,500 2.31 37,900 54,300 70,700 87,100 N/A 5 19,000 2.10 35,400 51,800 68,200 84,600 N/A 0 16,600 1.88 33,000 49,400 65,800 82,200 N/A -5 14,200 1.64 30,600 47,000 63,400 79,800 N/A -10 11,600 1.38 28,000 44,400 60,800 77,200 N/A RHF48A2A / CHA60TCC / BBA60A2A Conditions: 1,600 CFM Indoor Air @ 70 db Basic Unit Ambient w/o Aux. Heat Capacity F. Capacity of Unit With Auxiliary Heat C.O.P. 4.8 kw 9.6 kw 14.4 kw 19.2 kw 24 kw 28.8 kw 65 58,300 4.29 74,700 91,100 107,500 123,900 140,300 N/A 60 55,200 4.14 71,600 88,000 104,400 120,800 137,200 N/A 55 52,000 3.97 68,400 84,800 101,200 117,600 134,000 N/A 50 48,600 3.79 65,000 81,400 97,800 114,200 130,600 N/A 45 45,000 3.66 61,400 77,800 94,200 110,600 127,000 N/A 40 41,800 3.58 58,200 74,600 91,000 107,400 123,800 N/A 35 38,500 3.39 54,900 71,300 87,700 104,100 120,500 N/A 30 36,800 3.09 53,200 69,600 86,000 102,400 118,800 N/A 25 33,900 2.92 50,300 66,700 83,100 99,500 115,900 N/A 20 31,300 2.75 47,700 64,100 80,500 96,900 113,300 N/A 15 28,400 2.55 44,800 61,200 77,600 94,000 110,400 N/A 10 25,500 2.35 41,900 58,300 74,700 91,100 107,500 N/A 5 22,600 2.13 39,000 55,400 71,800 88,200 104,600 N/A 0 19,700 1.91 36,100 52,500 68,900 85,300 101,700 N/A -5 16,800 1.67 33,200 49,600 66,000 82,400 98,800 N/A -10 13,800 1.40 30,200 46,600 63,000 79,400 95,800 N/A 5

Specifications (BBA/BBC Blower Coil): BBA/BBC Blower Specifications (18,000-60,000) BBA24A2A BBA36A2A BBA48A2A BBA60A2A BBC36A2A BBC48A2A BBC60A2A Cooling Capacity Nominal 18,000-30,000 30,000-42,000 36,000-60,000 48,000-60,000 18,000-42,000 30,000-48,000 36,000-60,000 Blower Motor Horsepower 1/4 1/3 1/3 1/2 1/2 3/4 3/4 Blower Wheel. Width x Dia. 9 x 7 10 x 7 10 x 10 11 x 10 10 x 7 10 x 10 11 x 10 CFM Cooling 790 1,150 1,380 1,770 1,400 1,550 1,780 Ext. Static Pressure" W.C., Max 1 0.50 0.50 0.5 0.50 0.50 0.50 0.50 Wire Size Determination NOTE: It is important to electrically connect the unit and properly size fuses/circuit breakers and wires in accordance with all national and/or local electrical codes. Use copper wires only. Power Characteristics 208/230-1 -60 Power Supply (w/o Heater Kits) Min. Circuit Ampacity 2 1.9 3.0 3.8 4.9 5.4 8.8 8.8 Max. Overcurrent Protection 2 15 15 15 15 15 15 15 Approx. Shipping Weight (lbs.) 63 68 78 90 72 82 94 1 With Electric Heater Kit installed 2 Minimum Circuit Ampacity (MCA) and Maximum Overcurrent Protection (MOP) for blower without supplemental heat installed. Refer to nameplate for MCA and MOP with approved accessory heaters installed. Dimensions (BBA/BBC Blower Coil): Dimensions in Inches 11 3/8 3 Knockouts 1-3/32 1-23/64 1-23/32 19 5/8 21 1/8 4 2 "H" 2 1/16 Nomenclature (BBA/BBC Blower Coil): "A" "B" "W" 2 7/8 Knockout B B A 24 A 2 A Dimensions (inches) Model Number A B H W BBA24A2A 15 15 22-1/4 16-1/2 BBA36A2A 15 15 22-1/4 16-1/2 BBA48A2A 19 19 22-1/4 20-1/2 BBA60A2A 23 23 26-1/4 24-1/2 BBC36A2A 15 15 22-1/4 16-1/2 BBC48A2A 19 19 22-1/4 20-1/2 BBC60A2A 23 23 26-1/4 24-1/2 Product Type Design Series B: Blower Coil A: First Series System Type Voltage B: Multi-positional 2: 230V-1-60 Efficiency Factory Heat Installed A: Standard A = 0 kw C: Variable Speed Nominal Capacity 24: 24,000 36: 36,000 48: 48,000 60: 60,000 6

Specifications: (CCA**FCC, FDC, FKC and CHA**TCC, TXC Cased A-Coils) Being able to match a blower section with a cased coil to form a blower coil offers many advantages. Primarily, you have the freedom to select the best combination to achieve the efficiency and airflow capabiltiy needed for the applicaiton. Each blower section has two 3 x 12 pieces of twenty gauge material to attach the blower section to the cased coil. The flat surface on the blower bottom and on top of the coil, along with a foam strip for extra tightness, provide a secure air-tight mating system. Evaporator Coil CCA18FCC CCA24FCC CHA18TCC CCA/CHA CASED A-COIL SPECIFICATIONS CCA30FCC CCA30FDC CHA24TCC CHA24TXC CCA36FCC CCA36FDC CCA36FKC CHA30TCC CHA30TXC CCA42FCC CCA42FDC CHA36TCC CHA36TXC CCA48FCC CCA48FDC CHA42TCC CHA42TXC CCA54FCC CHA48TCC CCA57FCC CHA54TCC CCA60FCC CHA57TCC CHA60TCC CHA60TXC Face Area (Sq. Ft.) 2.81 2.81 3.75 3.75 4.22 4.69 5.16 5.16 5.63 5.63 Rows 2 3 2 3 3 3 2 3 3 4 FPI 16 14 16 14 13 13 16 14 14 15 Drain Connections Primary 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT Auxiliary 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT Refrig. Line Connection Liquid* 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" Vapor* 5/8" 5/8" 3/4" 3/4" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" Approx. Shipping Weight (lbs) 34 39 43 46 (FDC) 50 53 (FDC) 58 (FKC) 54 57 (FDC) * Refer to Unit Specification Sheet for proper refrigeration line sizes. Installer may need to supply adapter. 58 62 (FDC) 64 71 73 89 Dimensions: (CCA**FCC/FCD/FKC and CHA**TCC, TXC Cased A-Coils) Dimensions in Inches 2 H B (Top) or C (Bottom) 21 1/8 7 4 3/4 1 5/8 2 3/4 2 W 1 Cabinet A-Coil Cabinet Supply Air Return Air Width Model Opening Opening (W) ( CCA--F*C ) ( CHA--TCC ) ( CHA--TXC ) ( H ) (A x B) (A x C) CCA18FCC Small CCA24FCC CHA18TCC 14 1/4 ( 16 1/2 ) CCA30FCC CHA24TCC CHA24TXC 15 x 18 3/4 15 x 20 3/16 18 1/4 CCA36FCC CHA30TCC CHA30TXC CCA42FCC CHA36TCC CHA36TXC 22 1/4 CCA30FDC Medium CCA36FDC ( 20 1/2 ) CCA42FDC 22 1/4 19 x 18 3/4 19 x 20 3/16 CCA48FCC CHA42TCC CHA42TXC CCA36FKC CCA48FDC Large CCA54FCC CHA48TCC 26 1/4 23 x 18 3/4 23 x 20 3/16 ( 24 1/2 ) CCA57FCC CHA54TCC CCA60FCC CHA57TCC CHA60TCC CHA60TXC 7

Specifications: (CHF Cased Horizontal Coils) Being able to match a blower section with a cased coil to form a blower coil offers many advantages. Primarily, you have the freedom to select the best combination to achieve the efficiency and airflow capabiltiy needed for the applicaiton. Each blower section has two 3 x 12 pieces of twenty gauge material to attach the blower section to the cased coil. Additionally, the CCF and CHF Series Horizontals contain an extra 3 X 12 piece of twenty guage material to add rigidity for the combined blower coil. The flat surface on the blower bottom and on top of the coil, along with a foam strip for extra tightness, provide a secure air-tight mating system. CHF18TCC CHF24TCC CHF30TCC CHF36TCC CHF42TCC CHF48TCC CHF60TCC Drain Connections Primary 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT Auxiliary 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT Refrigeration Line Connection Liquid* 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" Vapor* 5/8" 5/8" 3/4" 7/8" 7/8" 7/8" 7/8" Shipping Weight (lbs) 41 44 48 56 56 72 82 *Refer to Unit Specification Sheet for proper refrigeration line sizes. Installer may need to supply adapter. Dimensions: CHF**TCC Dimensions in Inches Cabinet Width (W) Small 22 1/4 CHF**TCC Horizontal Coils CHF18TCC CHF24TCC CHF30TCC Cabinet (H) Left Air Opening (A x B) Right Air Opening (A x C) 16 1/2 15 x 18 3/4 15 x 20 3/16 Medium 22 1/4 CHF36TCC CHF42TCC 20 1/2 19 x 18 3/4 19 x 20 3/16 Large 26 1/4 CHF48TCC CHF60TCC 24 1/2 23 x 18 3/4 23 x 20 3/16 All air opening flanges are 3/4 except for the two adjacent to the access panel. The flange to the right is 3/16 and the one to the left is 1-5/16. W 1" A H 4" 4" 5" 2" 1-1/2" 8

Specifications: (CCF Cased Horizontal Coils) Being able to match a blower section with a cased coil to form a blower coil offers many advantages. Primarily, you have the freedom to select the best combination to achieve the efficiency and airflow capabiltiy needed for the applicaiton. Each blower section has two 3 x 12 pieces of twenty gauge material to attach the blower section to the cased coil. Additionally, the CCF and CHF Series Horizontals contain an extra 3 X 12 piece of twenty guage material to add rigidity for the combined blower coil. The flat surface on the blower bottom and on top of the coil, along with a foam strip for extra tightness, provide a secure air-tight mating system. CCF24FCC CCF24FDC CCF30FCC CCF36FCC CCF36FDC CCF42FCC CCF48FCC CCF48FDC CCF60FCC CCF61FDC Drain Connections Primary 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT Auxiliary 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT 3/4 FPT Refrigeration Line Connection Liquid* 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" Vapor* 5/8" 3/4" 3/4" 7/8" 7/8" 7/8" Shipping Weight (lbs) 41 48 56 72 48 56 44 (FDC) 51 (FDC) 59 (FDC) 82 (FDC) Dimensions: CCF**FCC/FDC Dimensions in Inches Cabinet Width (W) Small 22 1/4 CCF**F*C Horizontal Coils CCF24FCC CCF30FCC CCF36FCC Cabinet (H) Left Air Opening (A x B) Right Air Opening (A x C) 16 1/2 15 x 18 3/4 15 x 20 3/16 Medium 22 1/4 CCF24FDC CCF36FDC CCF42FCC CCF48FCC 20 1/2 19 x 18 3/4 19 x 20 3/16 Large 26 1/4 CCF48FDC CCF60FCC CCF61FCC 24 1/2 23 x 18 3/4 23 x 20 3/16 All air opening flanges are 3/4 except for the two adjacent to the access panel. The flange to the right is 3/16 and the one to the left is 1-5/16. W 1" A H 4" 4" 5" 2" 1-1/2" 9

Static Pressure Drop Across Indoor Coil vs. CFM DP (in. w.c.) CCH24FCD CHH24TCD CFM=800 CCH30FCD CHH30TCD CFM=1,000 CCH36FCD CHH36TCD CFM=1,200 CCH48FCD CHH48TCD CFM=1,600 CCH60FCD CHH60TCD CFM=1,800 Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet 0.050 760 --- --- --- --- --- --- --- --- --- 0.075 1140 640 --- --- --- --- 810 --- --- --- 0.100 --- 860 820 --- 960 --- 1080 --- 1350 --- 0.125 --- 1070 1020 --- 1090 560 1350 840 1530 --- 0.150 --- --- 1220 760 1220 670 1610 1000 1710 1280 0.175 --- --- --- 890 1340 780 1880 1170 1900 1390 0.200 --- --- --- 1010 1460 890 --- 1340 2100 1490 0.225 --- --- --- 1140 --- 1000 --- 1510 --- 1590 0.250 --- --- --- 1270 --- 1110 --- 1670 --- 1680 0.275 --- --- --- --- --- 1220 --- 1840 --- 1760 0.300 --- --- --- --- --- 1330 --- --- --- 1830 DP (in. w.c.) CHF18TCC CCF24FCC CCF24FDC CFM=600 CHF24TCC CCF30FCC CFM=1,000 CHF30TCC CCF36FCC CCF36FDC CFM=1,200 CHF36TCC CCF42FCC CCF42FDC CFM=1,250 CHF42TCC CCF48FCC CCF48FDC CFM=1,400 CHF48TCC CCF60FCC CFM=1,600 CHF60TCC CCF61FCC CFM=1,800 Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet 0.050 580 440 --- --- --- --- --- --- --- --- --- --- --- --- 0.075 670 520 --- --- --- --- --- --- --- --- --- --- --- --- 0.100 760 600 590 560 670 610 880 750 880 750 1070 1010 1140 1160 0.125 860 680 680 650 750 690 980 850 980 850 1200 1130 1230 1240 0.150 950 770 770 730 840 760 1080 950 1080 950 1320 1250 1350 1330 0.175 1030 830 830 790 910 830 1180 1030 1180 1030 1440 1350 1440 1410 0.200 1120 890 890 850 980 890 1270 1110 1270 1110 1550 1450 1530 1490 0.225 1190 960 960 910 1040 950 1350 1190 1350 1190 1650 1540 1620 1570 0.250 1260 1030 1030 980 1100 1000 1420 1260 1420 1260 1740 1640 1690 1650 0.275 1320 1090 1090 1030 1150 1050 1490 1330 1490 1330 1830 1730 1780 1730 0.300 1390 1140 1140 1080 1210 1100 1560 1400 1560 1400 1920 1820 1830 1800 10

Static Pressure Drop Across Indoor Coil vs. CFM CCA18FCC CCA24FCC CCA30FCC CCA30FDC CCA36FCC CCA36FDC CCA36FKC CCA42FCC CCA42FDC CCA48FCC CCA48FDC CCA54FCC CCA57FCC CCA60FCC DP CFM=600 CFM=800 CFM=1,000 CFM=1,200 CFM=1,250 CFM=1,400 CFM=1,600 CFM=1,800 CFM=1,800 (in. w.c.) Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet 0.050 310 330 350 300 --- --- --- --- --- --- --- --- --- --- --- --- --- --- 0.075 455 425 440 380 --- --- --- --- --- --- --- --- --- --- --- --- --- --- 0.100 600 520 530 460 850 600 780 640 750 600 870 690 1170 940 1170 1030 1180 1040 0.125 675 590 605 520 965 680 895 730 890 710 1010 805 1335 1070 1315 1155 1325 1160 0.150 750 660 680 580 1080 760 1010 820 1030 820 1150 920 1500 1200 1460 1280 1470 1280 0.175 825 720 745 630 1180 825 1105 900 1120 895 1270 1020 1635 1310 1585 1390 1590 1405 0.200 900 780 810 680 1280 890 1200 980 1210 970 1390 1120 1770 1420 1710 1500 1710 1530 0.225 --- 835 865 730 1355 955 1275 1040 1330 1065 1515 1215 1890 1515 1790 1600 1850 1630 0.250 --- 890 920 780 1430 1020 1350 1100 1450 1160 1640 1310 2010 1610 1870 1700 1990 1730 0.275 --- --- 970 820 1510 1060 1420 1155 1555 1245 1715 1370 2120 1695 2015 1780 2115 1825 0.300 --- --- 1020 860 1590 1100 1490 1210 1660 1330 1790 1430 2230 1780 2160 1860 2240 1920 CHA24TCC CHA30TCC CHA36TCC CHA42TCC CHA60TCC CHA18TCC CHA24TXC CHA30TXC CHA36TXC CHA42TXC CHA48TCC CHA54TCC CHA57TCC CHA60TXC DP CFM=600 CFM=800 CFM=1,000 CFM=1,200 CFM=1,250 CFM=1,400 CFM=1,600 CFM=1,800 CFM=1,800 (in. w.c.) Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet Dry Wet 0.050 350 300 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 0.075 440 380 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 0.100 530 460 850 600 780 640 750 600 870 690 1,170 940 1,170 1,030 1,180 1,040 1,330 1,190 0.125 605 520 965 680 895 730 890 710 1,010 805 1,335 1,070 1,315 1,155 1,325 1,160 1,485 1,330 0.150 680 580 1,080 760 1,010 820 1,030 820 1,150 920 1,500 1,200 1,460 1,280 1,470 1,280 1,570 1,420 0.175 745 630 1,180 825 1,105 900 1,120 895 1,270 1,020 1,635 1,310 1,585 1,390 1,590 1,405 1,755 1,585 0.200 810 680 1,280 890 1,200 980 1,210 970 1,390 1,120 1,770 1,420 1,710 1,500 1,710 1,530 1,800 1,620 0.225 865 730 1,355 955 1,275 1,040 1,330 1,065 1,515 1,215 1,890 1,515 1,790 1,600 1,850 1,630 1,900 1,715 0.250 920 780 1,430 1,020 1,350 1,100 1,450 1,160 1,640 1,310 2,010 1,610 1,870 1,700 1,990 1,730 2,000 1,810 0.275 970 820 1,510 1,060 1,420 1,155 1,555 1,245 1,715 1,370 2,120 1,695 2,015 1,780 2,115 1,825 2,090 1,905 0.300 1,020 860 1,590 1,100 1,490 1,210 1,660 1,330 1,790 1,430 2,230 1,780 2,160 1,860 2,240 1,920 2,180 2,000 BMA Dry Air Flow w/o Air Filter BMA24 Dry Air Flow Data w/o air filter (CFM) BMA30 BMA36 BMA42 low med. high low high low high low high external static (in.w.c.) 0.1 630 850 1060 1120 1390 1270 1430 1510 1650 0.2 600 790 1000 1090 1350 1210 1360 1440 1580 0.3 550 750 930 1080 1300 1160 1290 1360 1500 0.4 500 700 860 1050 1240 1090 1250 1300 1420 0.5 440 640 790 1020 1180 1030 1120 1210 1350 0.6 530 700 970 1110 940 1020 1130 1240 Air flow data is ± 5%; data obtained at 230 Vac in upflow position. Clean air filter static is appx. 0.1. Electric heater static is negligible. Add approximately.075 static for wet coil. Listed data is with horizontal pan installed; subtract.05 static if removed (upflow/downflow). 11

BBC Blowers and Cased A-Coil Matches: BBA24A2A (16-1/2" wide) BBA Blower Sections -- Approved Comabinations with Horizontal Cased Coils For Cooling and Heat Pump Installations/Applications* Length BBA Blower Sections -- Approved Combinations with Cased A-Coils For Cooling and Heat Pump Installations/Applications* BBA24A2A (16-1/2" wide) BBA36A2A (16-1/2" wide) BBA48A2A (20-1/2" wide) BBA60A2A (24-1/2" wide) Standard Efficiency Cased Coils CCA18FCC 36-1/2" CCA24FCC 36-1/2" CCA48FCC 44-1/2" CCA54FCC 52-1/2" CCA24FCC 36-1/2" CCA30FCC 40-1/2" CCA57FCC 52-1/2" CCA30FCC 40-1/2" CCA36FCC 40-1/2" CCA60FCC 52-1/2" CCA36FCC 40-1/2" CCA42FCC 40-1/2" Wide Body Cased Coils CCA30FDC 44-1/2" CCA48FDC 52-1/2" CCA36FDC 44-1/2" CCA36FKC 52-1/2" CCA42FDC 44-1/2" High Efficiency Cased Coils CHA18TCC 36-1/2" CHA24TCC 40-1/2" CHA42TCC 44-1/2" CHA48TCC 52-1/2" CHA24TXC CHA42TXC CHA24TCC 40-1/2" CHA30TCC 40-1/2" CHA54TCC 52-1/2" CHA30TXC CHA30TCC 40-1/2" CHA36TCC 44-1/2" CHA57TCC 52-1/2" CHA36TXC CHA36TCC 44-1/2" CHA60TCC 52-1/2" CHA60TXC * Note : Installer must check the system external static pressure to ensure proper airflow. BBA36A2A (16-1/2" wide) Length BBA48A2A (20-1/2" wide) Length BBA60A2A (24-1/2" wide) Length Standard Efficiency Cased Coils CCF24FCC 44-1/2" CCF24FCC 44-1/2" CCF42FCC 44-1/2" CCF60FCC 52-1/2" CCF30FCC 44-1/2" CCF30FCC 44-1/2" CCF48FCC 44-1/2" CCF61FCC 52-1/2" CCF36FCC 44-1/2" CCF36FCC 44-1/2" Wide Body Cased Coils CCF24FDC 44-1/2" CCF48FDC 52-1/2" CCF36FDC 44-1/2" BBC36A2A (16-1/2" wide) BBC Blowers - Approved Combinations with Cased A-Coils For Cooling and Heat Pump Installations/Applications BBC48A2A (24-1/2" wide) BBC60A2A (24-1/2" wide) Standard Efficiency Cased Coils CCA18FCC 36-1/2" CCA48FCC 44-1/2" CCA54FCC 52-1/2" CCA24FCC 40-1/2" CCA57FCC 52-1/2" CCA30FCC 40-1/2" CCA60FCC 52-1/2" CCA36FCC 44-1/2" Wide Body Cased Coils Wide Body Cased Coils CCA42FCC 44-1/2" CCA30FDC 44-1/2" CCA48FDC 52-1/2" CCA36FDC 44-1/2" CCA36FKC 52-1/2" CCA42FDC 44-1/2" High Efficiency Cased Coils CHA18TCC 36-1/2" CHA42TCC 44-1/2" CHA48TCC 52-1/2" CHA42TXC CHA24TCC 40-1/2" CHA54TCC 52-1/2" CHA24TXC CHA30TCC 40-1/2" CHA57TCC 52-1/2" CHA30TXC CHA36TCC 44-1/2" CHA60TCC 52-1/2" CHA60TXC BBC36A2A (16-1/2" wide) BBC Blowers Approved Combinations with HorizontalCased Coils For Cooling and Heat Pump Installations/Applications Length BBC48A2A BBA48A2A (20-1/2" wide) Length Standard Efficiency Cased Coils BBC60A2A BBA60A2A (24-1/2" wide) Length CCF24FCC 44-1/2" CCF42FCC 44-1/2" CCF60FCC 52-1/2" CCF30FCC 44-1/2" CCF48FCC 44-1/2" CCF61FCC 52-1/2" CCF36FCC 44-1/2" CCA60FCC 52-1/2" Wide Body Cased Coils CCF24FDC 44-1/2" CCA48FDC 52-1/2" CCF36FDC 44-1/2" 12

Accessories: BMA Heater Kits With and Without Circuit Breakers SINGLE CIRCUIT DUAL CIRCUIT BMA BMA**F00A MODELS ONLY Heater Kit Model Volt kw Minimum Circuit Ampacity (MCA) Maximum Overcurrent Protection (MOP) Minimum Circuit Ampacity (MCA) Maximum Overcurrent Protection (MOP) EDB**A hascircuit Breakers. EDK**A does not have Circuit Breakers. Minimum Circuit Ampacity (MCA) Maximum Overcurrent Protection (MOP) (All Models) NHK01A 240 none 3.4 15 -- -- -- -- (no heat kit) 208 none 2.9 15 -- -- -- -- (All Models) EDK05A or 240 4.8 29.6 30 -- -- -- -- EDB05A 208 3.6 25.6 30 -- -- -- -- (All Models) EDK07A or 240 7.0 41.0 45 -- -- -- -- EDB07A 208 5.3 35.5 40 -- -- -- -- (All Models) EDK10A or 240 9.5 55.9 60 -- -- -- -- BMA30F00A BMA36F00A BMA42F00A BMA30F00A BMA36F00A BMA42F00A EDB10A 208 7.1 48.4 50 -- -- -- -- EDK15A or EDB15A EDK20A or EDB20A 240 208 240 208 14.25 10.7 17.5 13.1 -- -- -- -- Use only copper wires, 75 C minimum. Install and size wires per NEC (National Electrical Code) and local codes. Please refer to the name plate data for the specific model electrical data. -- -- -- -- 29.6 25.6 34.6 30.0 30 30 35 30 52.5 45.5 60 '52 60 45 60 60 BBA/BBC Electric Heater Kits with Multiple Supply Circuits Minimum Circuit Ampacity Indoor Unit EHK05C/D ECB05C/D EHK07C/D ECB07C/D EHK10C/D ECB10C/D EHK15C/D ECB15C.D EHK20C/D ECB20C/D BBA24A2A 27.8 41.3 53.8 53.8 53.8 EHK25C/D ECB25C/D EHK30C/D ECB30C/D BBA36A2A 29.0 42.4 55.0 55.0 55.0 55.0 55.0 BBA48A2A 29.7 43.2 55.7 55.7 55.7 55.7 55.7 BBA60A2A 30.9 44.4 56.9 56.9 56.9 56.9 56.9 BBC36A2A 31.3 44.8 57.3 57.3 57.3 57.3 57.3 BBC48A2A 33.9 46.6 59.9 59.9 59.9 59.9 59.9 BBC60A2A 33.9 46.6 59.9 59.9 59.9 59.9 59.9 Maximum Overcurrent Protection BBA24A2A 30.0 45.0 60.0 60 + 30 60 + 30 BBA36A2A 30.0 45.0 60.0 60 + 30 (2) 60 (2) 60 + 30 (3) 60 BBA48A2A 30.0 45.0 60.0 60 + 30 (2) 60 (2) 60 + 30 (3) 60 BBA60A2A 35.0 50.0 60.0 60 + 30 (2) 60 (2) 60 + 30 (3) 60 BBC36A2A 35.0 45.0 60.0 60 + 30 (2) 60 (2) 60 + 30 (3) 60 BBC48A2A 35.0 50.0 60.0 60 + 30 (2) 60 (2) 60 + 30 (3) 60 BBC60A2A 35.0 50.0 60.0 60 + 30 (2) 60 (2) 60 + 30 (3) 60 Note: All banks of heat may not operate for 230-240V Not Approved Not Recommended (low temperature rise) IMPORTANT: While the above data is presented as a guide, the installer MUST electrically connect the unit and size all overcurrent protection devices and wires in accordance with the National Electrical Code, Canadian Electrical Code, and/or Electrical Codes of country, state, province, or regional authority having jurisdiction. The above data assumes 75ºC copper wires and single-point power connections. 13

BMA Airhandler Dimensions: B SIDE VIEW (HORIZONTAL) D 10.00 E C TOP VIEW A 1 9/10 14 1/2 MODEL DIMENSIONS A B C D E BMA24F**A 18 1/2 16 1/2 42 14 1/2 21 3/4 BMA30F**A 18 1/2 16 1/2 42 14 1/2 21 3/4 BMA36F**A 20 1/5 19 1/2 44 17 1/2 21 3/4 3 1/0 6.0 FRONT VIEW BMA42F**A 20 1/5 19 1/2 44 17 1/2 21 3/4 All dimensions are in inches. BMA Nomenclature: B M A 24 F 0 0 A Product Type Florator Design Series B: Blower Family Metering A: First Series System Type Factory Installed M: Multi-positional Heat Options Airhandler 00 = No Installed Heat 05 = 5 kw Factory Installed Efficiency 10 = 10 kw Factory Installed A: Standard Motor Nominal Capacity 24: 24,000 30: 30,000 36: 36,000 42: 42,000 14

Specifications - BMA Airhandler: (continued) BMA Airhandler BMA24F00A BMA24F05A BMA30F00A BMA30F10A BMA36F00A BMA36F10A BMA42F00A BMA42F10A NOM. COOLING CAPACITY (TONS) 1.5 & 2 1.5 & 2 2.5 2.5 3 3 3.5 3.5 SUCTION LINE 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 LIQUID LINE 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 DRAIN CONNECTION 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 REFRIGERANT R22 R22 R22 R22 R22 R22 R22 R22 FACTORY INSTALLED ORIFICE 0.062 0.062 0.064 0.064 0.068 0.068 0.073 0.073 FACTORY INSTALLED HEATER none 5 kw none 10 kw none 10 kw none 10 kw UNIT SIZE (WxDxH) 16.5x21.7x42 16.5x21.7x42 16.5x21.7x42 16.5x21.7x42 19.5x21.7x44 19.5x21.7x44 19.5x21.7x44 19.5x21.7x44 SUPPLY DUCT OPENING 14.5 x 10 14.5 x 10 14.5 x 10 14.5 x 10 17.5 x 10 17.5 x 10 17.5 x 10 17.5 x 10 RETURN DUCT OPENING 20 x 12.5 20 x 12.5 20 x 12.5 20 x 12.5 20 x 15.5 20 x 15.5 20 x 15.5 20 x 15.5 AIR FILTER 15 x 20 x 1 15 x 20 x 1 15 x 20 x 1 15 x 20 x 1 18 x 20 x 1 18 x 20 x 1 18 x 20 x 1 18 x 20 x 1 ELECTRICAL 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 24 Vac 24 Vac 24 Vac 24 Vac 24 Vac 24 Vac 24 Vac 24 Vac BLOWER MOTOR HORSEPOWER 1/4 1/4 1/3 1/3 1/3 1/3 1/2 1/2 NO. OF BLOWER SPEEDS 3 3 2 2 2 2 2 2 NOM. CFM 600 or 800 600 or 800 1000 1000 1200 1200 1400 1400 UNIT WEIGHT (LBS.) 106 107 120 121 125 126 125 126 Factory installed orifice is for the RHA--B*A heat pump models, refer to the Installation Instructions for other OD unit models. Line set connection is determined by the OD unit and not by the ID coil connection. BMA Models Without Factory Installed Heat Model Capacity CFM* Power Range Low Medium High BMA24F00A 1.5 & 2.0 Tons 440 640 790 208/230 VAC - 60 Hz - 1ph. BMA30F00A 2.5 Tons 1020 --- 1190 208/230 VAC - 60 Hz - 1ph. BMA36F00A 3.0 Tons 1030 --- 1120 208/230 VAC - 60 Hz - 1ph. BMA42F00A 3.5 Tons 1130 --- 1240 208/230 VAC - 60 Hz - 1ph. * @ 0.5 ESP, 230 volt, no coil & no filter BMA Models With Factory Installed Heat Model Capacity CFM* Power Range Low Medium High BMA24F05A 1.5 & 2 Tons 440 640 790 208/230 VAC - 60 Hz - 1ph. BMA30F10A 2.5 Tons 1020 --- 1190 208/230 VAC - 60 Hz - 1ph. BMA36F10A 3.0 Tons 1030 --- 1120 208/230 VAC - 60 Hz - 1ph. BMA42F10A 3.5 Tons 1130 --- 1240 208/230 VAC - 60 Hz - 1ph. * @ 0.5 ESP, 230 VAC, no coil & no filter 15

Accessories: (continued): Thermostats 1213403 1213404 1213410 1213406 Analog Digital Digital Digital Man. Changeover Man. Changeover Man. Changeover Man. Or Auto Changeover Non-Programmable Non-Programmable Programmable Programmable 1 Cool, 2 Heat 1 Cool, 2 Heat 1 Cool, 2 Heat 2 Cool, 3 Heat Other Accessories Model-Specific Accessories Model Number RHF24 RHF30 RHF36 RHF42 RHF48 Hard Start Kit HSK10A Low Ambient Kit Freeze Protection Kit Ambient Temperature Kit Fossil Fuel Kit Electronic Air Cleaner LAC03A FSK01A ATK05A FFK03A EAC5 BBA/BBC Heater Kits Single Point Power Kits are availabe for the ECB**C/D 15-30 kw Heater Kits. The 15 through 30 kw heater kits are set up for multiple power supplies. These kits enable the installer to run a single power supply to the blower coil and electric heaters. There are two single point power kits: the SPK02A for heater sizes 15 and 20kW, and the SPK03A for the 24 and 30 kw sizes. Indoor Blower Section BBA/BBC Blower Section Electric Heaters Media Air Cleaner BBA/BBC Electric Heater Kits Application Data -- With Single Point Power Kit EHK15C/D ECB15C/D SPK02A Minimum Circuit Ampacity EHK20C/D ECB20C/D SPK02A EHK25C/D ECB25C/D SPK03A EHK30C/D ECB30C/D SPK03A EHK15C/D ECB15C/D SPK02A Maximum Overcurrent Protection ECB20C/D ECB20C/D SPK02A EHK25C/D ECB25C/D SPK03A There are two lines of electric heater kits. The EHK**C/D s are available in the seven sizes listed below and shipped without electrical protection or circuit breakers. The second offering, the ECB**C/D s, are shipped with circuit breakers installed from the factory. Electric Heater Kits For BBA/BBC Blower Sections - Capacity @ 240 VAC MAC1 EHK30C/D ECB30C/D SPK03A BBA24A2A L1/L2 79.8 105.7 80 110 BBA36A2A L1/L2 80.9 106.9 132.8 158.8 90 110 150 175 BBA48A2A L1/L2 81.6 107.6 133.6 159.5 90 110 150 175 BBA60A2A L1/L2 82.8 108.8 134.8 160.7 90 110 150 175 BBC36A2A L1/L2 83.3 109.2 135.2 161.2 90 110 150 175 BBC48A2A L1/L2 85.9 111.9 137.9 163.9 90 125 150 175 BBC60A2A L1/L2 85.9 111.9 137.9 163.9 90 125 150 175 Note: All banks of heat may not operate for 230-240V Not Approved Not Recommended (low temperature rise) EHK05B EHK07B EHK10B EHK15B EHK20B EHK25B EHK30B ECB05B ECB07B ECB10B ECB15B ECB20B ECB25B ECB30B kw 4.8 7.2 9.6 14.4 19.2 24 28.8 16,400 24,600 32,800 49,100 65,500 81,900 98,300 Heating& Air Conditioning Comfort. Quality. Trust. Amana s continuing commitment to quality products may mean a change in specifications without notice. Form No. PDRHFA0100 2001 Amana Heating and Air Conditioning, Inc. 1810 Wilson Parkway, Fayetteville, TN Printed in U.S.A. Registered to ISO 9001 by QMI, Certificate #0070602 16