ERIN 2014 Conference Programme / Blansko Češkovice, Wellness Hotel Panorama/



Similar documents
THE OPTIMISATION OF BIOMASS COMBUSTION IN SMALL BOILERS

CONTENTS. ZVU Engineering a.s., Member of ZVU Group, WASTE HEAT BOILERS Page 2

MODERN TECHNOLOGIES FOR ENERGY AND MATERIAL RECOVERY FROM WASTE. Tomáš Rohal, Business Development CEEI 10-Oct-2013

Assignment 8: Comparison of gasification, pyrolysis and combustion

The soot and scale problems

Low grade thermal energy sources and uses from the process industry in the UK

Introduction to Computational Fluid Dynamics (CFD) for Combustion. (801)

CATALYSTS IN COMBUSTION TECHNOLOGY AND FLUE GAS CLEANING COMBUSTION AND FUELS

Tutkimuksen merkitys menestyvässä liiketoiminnassa- Innovaatiosta tuotteeksi

Facility Support Services

BIOMASS LOOKING FOR EFFICIENT UTILIZATION THE REHEAT CONCEPT. Jaroslav Lahoda Olaf Arndt Walter Hanstein. Siemens Power Generation (PG)

Sulfur Tail Gas Thermal Oxidizer Systems By Peter Pickard

Gasförmige und flüssige synthetische Energieträger aus Biomasse Stand der Entwicklungen an der TU Wien. Hermann HOFBAUER, TU Wien

BIOMASS RESEARCH at ECN. Bram van der Drift

B0401 Abstract 029 Oral Presentation Session B04 Innovative Applications and Designs - Tuesday, July 1, :00 h

Coherence-controlled holographic microscopy for live-cell QPI

Numerical analysis of size reduction of municipal solid waste particles on the traveling grate of a waste-to-energy combustion chamber

Carbon Dioxide Membrane Separation for Carbon Capture using Direct FuelCell Systems

Lecture 35: Atmosphere in Furnaces

Science Standard Articulated by Grade Level Strand 5: Physical Science

Hot Water Boilers and Controls Why Condensing Boilers are Different. Presented Oct. 14, 2008 Long Island Chapter, ASHRAE

Steel production. Furnace linings made from carbon and graphite are applied for the production of primary iron.

GENERAL PROPERTIES //////////////////////////////////////////////////////

Stora Enso Fors Ltd Sweden

The IMES Master Programme

Alstom Thermal Services AmStar 888 Kraftvärme Conference, Sweden

Biomass Issues. John Christopher Madole Associates, Inc. presentation to the Minnesota Department of Commerce September 12, 2007

EXAMPLE EXERCISE 4.1 Change of Physical State

Biomass Syngas Production Technology by Gasification for Liquid Fuel and Other Chemicals

GENERATION TECHNOLOGY ASSESSMENT

Extracting Valuable Lignin for Biorefinary Production and Replacement of Fossil Fuels

Jan Zdebor David Pavlis. ŠKODA JS a.s. and its Cooperation with Czech Universities

From today s systems to the future renewable energy systems. Iva Ridjan US-DK summer school AAU Copenhagen 17 August 2015

COMPANY PROFILE. ATOMEX Prague, October 26, KRÁLOVOPOLSKÁ RIA, a.s. strana 1

XVI INTERNATIONAL SYMPOSIUM INNOVATION 2009

Biomass gasification development of attractive business cases

HOW IT WORKS ELECTRICITY GENERATION

Brewing Beer efficient and sustainable technologies in regard to energy and raw material input

Thermische Speicherung von Solarenergie

Sewage sludge treatment with oxygen enrichement and oxyfuel combustion in CFBC - new pilot plant results

CHP Plant based on a Hybrid Biomass and Solar System of the Next Generation EU project No. ENER/FP7/249800/"SUNSTORE 4" Dipl.-Ing. Alfred Hammerschmid

POLYCITY. Technical measures and experiences at a 6 MW cogeneration plant with wood chip furnace POLYCITY

PERFORMANCE EVALUATION OF NGCC AND COAL-FIRED STEAM POWER PLANTS WITH INTEGRATED CCS AND ORC SYSTEMS

How To Get A Degree In Economics

Application of the Biomass, OxyFuel, and Flameless Combustion for the utilisation of pulverised coals for electricity generation

16. Heat Pipes in Electronics Cooling (2)

Biomass-to-Fuel-Cell Power For Renewable Distributed Power Generation

Piping Systems for Nuclear Power Industry. Prague, October 2011

ODS Alloys in Coal-Fired Heat Exchangers Prototypes and Testing

Overview of Heat Recovery Boiler Systems and Operating Costs Factors Effecting Blowdown Blowdown Heat Recovery The Energy Tank

HEAT STORAGE AND TRANSFORMATION

Fraunhofer Project Group

Performance of the Boiler and To Improving the Boiler Efficiency Using Cfd Modeling

Gasification, Producer Gas and Syngas

1 DESCRIPTION OF THE APPLIANCE

Half the cost Half the carbon

UNIVERSITY OF DEFENCE

Skoda Supercritical Steam Turbine 660 MW

AE BIO SOLAR AE BIO SOLAR HYBRID PLANT SOLAR/BIOMASS ADESSO ENERGIA SRL HYBRID PLANT SOLAR/BIOMASS THE BEGINNING OF A NEW ENERGY PRESENTATION

CENTRIFUGAL CASTING.

Fortum Otso -bioliquid

State of the art of solid biomass technologies in Germany

(205) (205)

Development of Coal Gasification System for Producing Chemical Synthesis Source Gas

Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy

CHAPTER 3: MATTER. Active Learning Questions: 1-6, 9, 13-14; End-of-Chapter Questions: 1-18, 20, 24-32, 38-42, 44, 49-52, 55-56, 61-64

5.2. Vaporizers - Types and Usage

Technologies for small scale Biomass CHP-Plants an actual survey

David Mezzacappa, P.E. SCS Engineers Contractor to U.S. EPA on LMOP

A Weissenbach AUSTRIA Tel. +43/2672/890-0, Fax: Internet: office@polytechnik.at

The heat plant Future biorefinery. Panndagarna 2015 Västerås, April

Maximizing Boiler Plant Efficiency. Presenter: Dan Watkins, LEED BD+C Sales Engineer Bornquist, Inc.

13 th CZECH DAYS FOR EUROPEAN RESEARCH CZEDER 2015

HOW TO SELECT A LOW VOLUME (L.V ) BOILER

TECHNICAL MEETING ON IN-PILE TESTING AND INSTRUMENTATION FOR DEVELOPMENT OF GENERATION-IV FUELS AND STRUCTURAL MATERIALS

Coal Properties, Sampling & Ash Characteristics by Rod Hatt Coal Combustion, Inc. Versailles, KY

Originators of the Flexible Water Tube design

Fluidized Bed Based CO 2 Capture by Carbonate Looping

Valmet biotechnologies and pyrolysis status update. Joakim Autio Product manager, Pyrolysis systems Valmet

Description of Thermal Oxidizers

SIX REASONS TO DRY BIOGAS To A LOW DEWPOINT BEFORE COMBUSTION IN A CHP ENGINE STEVEN SCOTT MARKET DEVELOPMENT MANAGER ALTERNATIVE ENERGIES

1.3 Properties of Coal

Review on Experimental Analysis and Performance Characteristic of Heat Transfer In Shell and Twisted Tube Heat Exchanger

Drying of Woody Biomass. Process Engineering / GEA Barr-Rosin

ME 612 Metal Forming and Theory of Plasticity. 1. Introduction

Customer/Country Subject Scope of Supply Number of Pieces/ Dimensions/ Material/ Pressure/ Temperature UNIPROGRAM s.r.o. Praha Czech Republic

OCTOBER 20, 2006 PRAGUE. Institute of Macromolecular Chemistry AS CR Heyrovského nám Praha 6

VALIDATION, MODELING, AND SCALE-UP OF CHEMICAL LOOPING COMBUSTION WITH OXYGEN UNCOUPLING

This is a Master s degree level apprenticeship which includes academic learning combined workplace learning and training.

Steam and hot water boiler systems for industrial and municipal power generation Dr.-Ing. Wolfgang Sobbe VKK Standardkessel Köthen GmbH

Handling Corrosive or Abrasive Liquids

Study Plan. MASTER IN (Energy Management) (Thesis Track)

Micro-Turbine Combined Heat & Power Generators (CHP) Cold Climate Applications 2014 Polar Technology Conference Richard S.

Process Technology. Advanced bioethanol production and renewable energy generation from ligno-cellulosic materials, biomass waste and residues

Rauhalahti Biomass CHP Plant

University of Iowa Power Plant

Transcription:

12.00 18.00 REGISTRATION 23.04. 2014 /Wednesday/ Plenary Session Chairmen: Martin Lisý Conference hall Jiří Martinec IT: Ladislav Šnajdárek 14.30 14.50 ERIN Conference Opening Ceremony Invited Speakers: 14.50 15.10 Brzezina Petr /Country President Alstom Czech Republic and Slovakia, Czech Rep./ 15.10 15.25 Hrdlička František /Director of U.S. Czech CNCC, Central European Energy Institute, Czech Technical University in Prague, Czech Rep./ 15.25 15.45 Hrdlička Oto,/ Vice Director of Regional Chamber of Commerce Brno, Czech Rep./ 15.45 16.00 Coffee Break 23.04. 2014 /Wednesday/ Conference hall Chairman: Peter Križan IT: Ladislav Šnajdárek 16.00 17.30 18.00 DINNER Pilař Lukáš / UJV Řež, a.s. Czech Rep./ Decline Period of District Heating Systems in the Czech Republic Skopec Pavel /Czech Technical University in Prague, Czech Rep./ NOx Emissions from Bubbling Fluidized Bed Combustion of Lignite Coal Špiláček Michal / Brno University of Technology, Czech Rep./ The Comparison of Wood Chips and Cocoa Shells Combustion Kracík Petr / Brno University of Technology, Czech Rep./ Effect of Tube Pitch on Heat Transfer in Sprinkled Tube Bundle Gonová Ilona / University of West Bohemia, Plzeň, Czech Rep./ Analytical Determination and Measurement of Thermal Comfort Using the PMV and PPD Mlynár Peter / Slovak University of Technology in Bratislava, Slovakia/ Experimental Verification of Optimalized Analytical Calculation of Heat Transfer in Fin Pipe Heat Exchangers 19.30 23.59 Welcome Drink 1

23.04. 2014 /Wednesday/ Meeting Room N. Chairmen: Jiří Martinec Language: English/Czech Slovak IT: Ladislav Suk 16.00 17.59 18.00 DINNER Burian Ondřej /Czech Technical University in Prague, Czech Rep./ A Method of Steam Flow Rate Measurement in a Steam Generator Halabuk Dávid / Brno University of Technology, Czech Rep./ Characteristics of Fuel Rod Failures and Calculation of Stress and Deformation in Cladding During Pellet Cladding Interaction Juklíček Jakub / Research Centre Řež, Czech Rep./ Cold Trap for Purifying Liquid Metals Jarchovský Petr / Brno University of Technology, Czech Rep./ Accelerator Driven Systems for Nuclear Spent Fuel Transmutation Dostál Václav /Czech Technical University in Prague, Czech Rep./ Modelling of VVER 440/213 for Small Break Loss of Coolant Accident Analysis Varmuža Jan / Brno University of Technology, Czech Rep./ New Nano & Cerenkov Approaches and Research Opportunities in a Field of Nuclear Engineering 19.30 23.59 Welcome Drink 2

24.04. 2014 /Thursday/ Conference hall Language: English Chairman: Jan Hrdlička IT: Otakar Štelcl 8.45 13.00 REGISTRATION 9.00 10.15 Zelený Zbyněk /Czech Technical University in Prague, Czech Rep./ Downscale Application of Boiler Thermal Calculation Approach Moskalík Jiří / Brno University of Technology, Czech Rep./ Usage of Thermogravimetric Analysis for Energetic Opatřil Jan /Czech Technical University in Prague, Czech Rep./ Minimum Fluidization Velocity of Bed Materials Combustion Bartoš Ondřej /Czech Technical University in Prague, Czech Rep./ An Enaluation of the Standard Lambda Probe for the Operational Measurement in Pulverized Coal Boilers Purgar Amon / Vienna University of Technology, Austria/ Characteriz. of Combustion Kinetics of Single Particles in Fluidized Bed Combustion 24.04. 2014 /Thursday/ Conference hall Chairman: Jiří Moskalík Language: English IT: Otakar Štelcl Janák Luděk / Brno University of Technology, Czech Rep./ Power Management Electronics for Thermoelectric Energy Harvesting Systems Havlík Jan /Czech Technical University in Prague, Czech Rep./ Condensation of Water Vapor in a Vertical Tube Condenser Mydlil Petr /Czech Technical University in Prague, Czech Rep./ 10.30 11.45 Optimizing Parametres of Low Power Microturbine and ORC Device as a One Functional Unit Maščuch Jakub /Czech Technical University in Prague, Czech Rep./ The Influence of Steam Quality on the Efficiency of Vane Expander Jílek Radim / Vítkovice Power Engineering a.s.,czech Rep./ The Heat Exchanger of the Steam Air Mixture 11.45 12.00 Coffee Break 24.04. 2014 /Thursday/ Conference hall Language: Czech Slovak Chairman: Marek Baláš IT: Ladislav Šnajdárek Hádková Kristýna /Institute of Chemical Technology, Prague, Czech Rep./ Treatment of Natural Gas by Adsorption of CO 2 Jílková Lenka /Institute of Chemical Technology, Prague, Czech Rep./ Determination of Water Content in Pyrolytic Tars Using Karl Fischer Titration Konvička Jaroslav / Vítkovice Power Engineering a.s, Czech Rep./ FLEXIVIT Technologie pro energetické využití odpadního tepla spalin malých zdrojů 12.00 13.15 Kozlová Světlana /Research Centre Řež, Czech Rep./ Nové poznatky o vlivu biomasy na proces odsíření při spoluspalovaní hnědého uhlí a různých druhů biomasy Chríbik Andrej / Slovak University of Technology in Bratislava, Slovakia/ The Influence of Biogas Composition on the Parameters of a Combustion Engine Running in Micro cogeneration Unit 13.15 Common Photography /in front of the entrance/ 13.30 LUNCH 3

24.04. 2014 /Thursday/ Meeting Room N. Language: English Chairman: Monika Vitvarová IT: Petr Kracík 8.45 13.00 REGISTRATION 9.00 10.15 10.30 11.45 Vondrouš Petr /Czech Technical University in Prague, Czech Rep./ Heterogeneous Laser Welds of Ductile Iron and Cr Mo Low Alloyed Steel Bebr Lukáš / University of West Bohemia, Plzeň, Czech Rep./ Integration of Dependability Management within an IMS Framework Fišerová Zuzana / Brno University of Technology, Czech Rep./ Surface Layer Properties after Turning Hardened Bearing Steel Pavlica Marek / VŠB TU Ostrava, Czech Rep./ Selection of the Optimal Parameters for Laser Cutting Otoupalík Jan / Brno University of Technology, Czech Rep./ Rolling Deformation of Bearing Steels 24.04. 2014 /Thursday/ Meeting Room N. Language: English 11.45 12.00 Coffee Break 12.00 13.00 Chairman: Martin Slaný IT: Brázdil Marian Beniak Juraj / Slovak University of Technology in Bratislava, Slovakia/ Tools for Material Disintegration Fiala Zdeněk /Brno University of Technology, Czech Rep./ The Analysis of Specific Cutting Forces at Machining of Composite Materials Križan Peter / Slovak University of Technology in Bratislava, Slovakia/ Impact of Conditions in Pressing Chamber During Pressing on the Resulting Compacting Pressure Biath Peter / Slovak University of Technology in Bratislava, Slovakia / Hourly Output of Spherical Pellet Press Jurok Dalibor /VŠB Technical University of Ostrava, Czech Rep./ Experimental Measurements of the Cutting Forces at Milling of Stainless Steels 24.04. 2014 /Thursday/ Meeting Room N. Language: Czech Slovak Chairman: Martin Slaný IT: Brázdil Marian Beniak Juraj / Slovak University of Technology in Bratislava, Slovakia/ Part Properties Produced by Rapid Prototyping Technology Soukupová Lucie /Brno University of Technology, Czech Rep./ Optimized Ceramic Shell for Manufacturing of Aluminium Castings Using Lost Wax Technology Jaroš Aleš /Brno University of Technology, Czech Rep./ The Development of New HSS Milling Cutter with Negative Geometry for Roughing Operations 13.15 Common Photography /in front of the entrance/ 13.30 LUNCH 4

8.45 13.00 REGISTRATION 24.04. 2014 /Thursday/ Meeting Room N. Chairmen: Jiří Martinec Language: English /Czech Slovak IT: Ladislav Suk Dubská Larisa /ENVINET a.s., Czech Rep./ 9.00 10.00 Seminar 10.00 10.15 Studýnka Radim / Brno University of Technology, Czech Rep./ Pressure suppression system containment during the loss of coolant accidents 24.04. 2014 /Thursday/ Meeting Room N. Chairmen: Jiří Martinec ý Poláčková Jana /Institute of Chemical Technology, Prague, Czech Rep./ Effect of Chemical Regimes on Oxide Layers of Materials in Power Engineering Hanuš Jan / Brno University of Technology, Czech Rep./ Possibilities of the External Cooling of a Pressure Vessel in Case of the Accident with Active Zone Melting 10.30 11.45 Svoboda Josef / Brno University of Technology, Czech Rep./ Autonomous Nuclear Power Sources Krausová Aneta /Institute of Chemical Technology, Prague, Czech Rep./ In situ Electrochemical Impedance Spectroscopy of Zirconium in Lithiated Water Marušáková Daniela /Institute of Chemical Technology, Prague, Czech Rep./ Acoustic Emission During Tensile Testing 11.45 12.00 Coffee Break 24.04. 2014 /Thursday/ Meeting Room N. Chairmen: Jiří Martinec IT: Jan Hanuš Škarohlíd Jan /Czech Technical University in Prague, Czech Rep./ Coated Zirconium Alloy as Protection Against High Temperature Oxidation Romsy Tomáš /Czech Technical University in Prague, Czech Rep./ 12.00 13.00 CFD Simulation of Subcooled Boiling Lamoš Pavel / Brno University of Technology, Czech Rep./ The Diverse System for Heat Transfer from the Active Zone Král Dušan / Brno University of Technology, Czech Rep./ Environm. Aspects of Power Plants Utilization Studied via Radioanalytical Methods 13.15 Common Photography /in front of the entrance/ 13.30 LUNCH 5

24.04. 2014 /Thursday/ SOCIAL PROGRAM 14.45 17.30 EXCURSIONS. Buses leaving for caves excursions in front of the entrance by the timetable: The Výpustek Cave: 15.00 The Punkva Caves: 14.45 The Sloup Šošůvka Caves: 15.00 Return approximately between 17.00 17.30 19.00 CONFERENCE DINNER 6

25.04. 2014 /Friday/ Conference hall Chairman: Michal Špiláček IT: Otakar Štelcl 8.45 10.00 REGISTRATION 9.00 10.15 10.30 11.45 Štefanica Jiří /Czech Technical University in Prague, Czech Rep./ Prediction of NO X Emissions for FBC Boilers by Empirical Models The Influence of Scale up Salami Najdat / Brno University of Technology, Czech Rep./ Using of the Air steam as Gasifying Agent in Fluidized Bed Gasifier to Improve the Syngas Quality Plaček Viktor /Czech Technical University in Prague, Czech Rep./ Fuzzy Controller for Medium Scale Biomass Boiler Svátek Michal / Slovak University of Technology in Bratislava, Slovakia/ Mutual Interaction of Selected Parameters of Oak Sawdust Densification Process by the Density s Response Surface Jílková Lenka /Institute of Chemical Technology, Prague, Czech Rep./ Pyrolysis of Brown Coal Using Catalyst Based on W Ni 25.04. 2014 /Friday/ Conference hall Language: Czech Slovak Chairman: Marek Baláš IT: Michal Špiláček Brázdil Marian / Brno University of Technology, Czech Rep./ Maximum Output Power of the Flue Gas Thermoelectric Generator Utilizing the Waste Heat form a Small scale Biomass Boiler Matúš Miloš / Slovak University of Technology in Bratislava, Slovakia/ The Research of the Effect of Moisture Content of Densified Biomass on the Quality of Solid Biofuel Kabešová Zuzana / University of West Bohemia, Plzeň, Czech Rep./ Wind Turbine Noise Measurement Rajzinger Ján / Slovak University of Technology in Bratislava, Slovakia/ Pipeline Physics of Natural Gas Pipeline for Selected Steady state Flow Models: Comparative Study Széplaky Dávid / Technical University of Košice, Slovakia/ Use of a Mathematical Model for Analysis of Mutual Interactions Between Single Lines of Transit Gas Pipeline 12.00 Closing Ceremony 12.15 LUNCH 13.15 SHUTTLE BUS DEPARTURE 7

25.04. 2014 /Friday/ Meeting Room N. Chairman: Monika Vitvarová IT: Petr Kracík 8.45 10.00 REGISTRATION 9.15 10.15 10.30 11.45 Čekan Michal / Slovak University of Technology in Bratislava, Slovakia/ Low Cost Device for Ground Reaction Force Measurements in Biomechanics Pavlásek Peter / Slovak University of Technology in Bratislava, Slovakia/ Time Instability of Base Metal Thermocouples Šebelová Eva / Mendel University in Brno, Czech Rep./ Study of the Tool Wear Process in the Machining of Non metallic Materials Horvát Miroslav / Slovak University of Technology in Bratislava, Slovakia/ Hardening of the Surface Layers 25.04. 2014 /Friday/ Meeting Room N. Language: Czech Slovak Chairman: Petr Kracík IT: Ladislav Šnajdárek Surovský Juraj /VŠB Technical University of Ostrava, Czech Rep./ Experimentálne meranie drsnosti při zmene posuvovej rýchlosti Kubík Roman / Brno University of Technology, Czech Rep./ Computer Assistance Program Used for the Optimal Utilization of Storage Racks & Pallets Zemčík Oskar / Brno University of Technology, Czech Rep./ Hydrostatic Roller Burnishing Aplied on Surface Layer of Bearing Steel Rafaj Milan / Slovak University of Technology in Bratislava, Slovakia/ Cooperation in Product Development in Small and Medium Sized Enterprises Lipina Jan /VŠB Technical University of Ostrava, Czech Rep./ Long term Load Capacity of Screw Connections in Components Made by Rapid 12.00 Closing Ceremony 12.15 LUNCH 13.15 SHUTTLE BUS DEPARTURE 8

8.45 10.00 REGISTRATION 9.00 10.15 10.30 12.00 25.04. 2014 /Friday/ Meeting Room N. Chairmen: Jiří Martinec IT: Pavel Lamoš Svoboda Pavel /MICo s.r.o, Czech Rep./ TGA Analysis of Graphite Foil for Use in High Temperatures and Molten Salt Environment Svoboda Pavel /MICo s.r.o, Czech Rep./ Seminar Prehradný Jan /Czech Technical University in Prague, Czech Rep./ Athena code and Gd 2M+ fuel analysis 25.04. 2014 /Friday/ Meeting Room N. Chairmen: Jiří Martinec IT: David Halabuk Juklíček Jakub /Research Centre Řež, Czech Rep./ CFD Analysis of the Spacer Grids and Mixing Vanes Effect on the Flow in the Chosen Part of the TVSA T Fuel Assembly Černý Ondřej /Czech Technical University in Prague, Czech Rep./ Zircalloy Cladding Coated by Amorphous Carbon Suk Ladislav /Brno University of Technology, Czech Rep./ Critical Heat Flux for Flow Boiling of Water at Low Pressure in Vertical Internally Heated Annuli Veselý Ladislav /Czech Technical University in Prague, Czech Rep./ Calculation of the Heat Exchanger for S CO2 with Pinch Point Benešová Barbora /Czech Technical University in Prague, Czech Rep./ Zirconoum Fuel Cladding with Zirconium Dioxide as a New Protective Layer 12.00 Closing Ceremony 12.15 LUNCH 13.15 SHUTTLE BUS DEPARTURE Program subject to change! We will be informed about eventual changes at Registration Desk or before Sessions beginning. 9