www.technodrill.com.co MAIN OFFICE Autopista Medellín, Km. 8.5, Vía Bogotá La Vega, Parque Industrial Morelia, Tel. (+571) 865-6012, Tenjo BOGOTÁ - COLOMBIA SERVICE CENTERS PRESENTATION Revised: October 03, 2013
LETTER FROM THE GENERAL MANAGER Technodrill is a Colombian company born in the year of 1998 to fulfill the needs of the energy and oil industry which demanded a reliable supply of a quality service. Today our company accounts on over ninety employees that proudly work to service our customers with the best level of quality and compromise. Attached you will find a catalogue presentation of Technodrill s Service Centers in which you will find the machinery, equipment, tools, measuring instruments and NDT inspection equipment that we utilize to achieve our purpose. In this you will also have an overview of the different types of works we do such as drilling tools manufacture and repair; drill pipe, tubing and casing inspection and repair; manufacture of floating equipment; cutting of API connections in CNC lathes and precision machining; hardbanding and tungsten application; design, fabrication and repair of tools and structures; general welding and non-destructive testing. Our organization has three Service Centers strategically located to give you a nation-wide coverage: Bogotá Base: Covers Central and North areas. Neiva Base: Covers Huila and South West area. Meta Base: Covers the East Plains area, located in Cumaral, near Villavicencio. Do not hesitate to contact us if you have any queries or if you require a quote or service. Sincerely, CARLOS BALLESTEROS C. General Manager Page 2 of 22
CONTENTS Item Page 1. INTRODUCTION 4 2. CERTIFICATIONS AND LICENCING 5 3. SERVICE CENTERS LOCATIONS 6 3.1 BOGOTA BASE 6 3.2 NEIVA BASE 6 3.3 META BASE 7 4. SERVICES OFFERED 8 4.1 BHA TOOL SERVICE AND REPAIRS 8 4.1.1 Service Machinery and Equipment 8 4.2 MACHINE SHOP AND WELDING 9 4.2.1 Machine Shop Machinery 10 4.2.2 Welding and Hardbanding Equipment 13 4.3 N.D.T. INSPECTION SERVICE 14 4.3.1 NDT Inspection Equipment 15 4.4 RIG SERVICE 15 4.5 QUALITY CONTROL 16 4.5.1 Quality Control Instruments 16 4.6 IDENTIFICATION AND TRACEABILITY 16 5. TRANSPORTATION 17 6. LIST OF MAIN CUSTOMERS 17 PHOTO ATTACHMENT 20 Page 3 of 22
1. INTRODUCTION Technodrill s Service Centers are accountable for the maintenance, inspection, repair and fabrication of tools, structures and equipment utilized in the petroleum industry. Our technicians are capable of serving the petroleum and general industry requirements with a high standard of quality and service. For the provision of services our organization counts on the Bogota Base, the Neiva Base and Meta Base where we have fully equipped machine shops to serve in cutting of API rotary shouldered and Acme threaded connections, CNC machining, NDT inspection, repair of pipe, hardbanding, tungsten applications and special welding. In these three bases we have storage areas for tools and equipment of our clients. Technodrill offers and guarantees an integral, agile and well-supervised service to its clients. Technodrill offers drilling motors and jars for rental in diameters from 3-1/2 up to 9-1/2 ; keep permanent stock for sale and immediate delivery of down hole flotation equipment such as aluminum rigid centralizers, bow-type flexible integral and hinged centralizers, stop collars, reamer shoes, guide shoes and float collars from 4-1/2 up to 13-5/8 diameters; manufacture casing drilling bits in bronze and steel. Availability of these tools and equipment and list of prices can be obtained in our Main Office located at the Bogota Base. In our Bogota Service Center we have a technical section in to repair and service downhole tools such as drilling motors, drilling jars, shock tools and drilling jar intensifiers. Quality assurance is an important factor to ensure that our final product is of complete satisfaction to our customers, therefore in our Service Centers we are permanently looking forward to achieve it by following the international standards as detailed in the following chapter Certifications & Licensing. Additionally our company has implemented technical procedures according to API, ASTM and ASME standards to fulfill industrial requirements. At our Service Centers we are permanently concerned with Occupational Health, Safety and Environment. On this matter we are currently registered and audited by the Colombian Health and Safety Council (Consejo Colombiano de Seguridad) since 2001 having a yearly qualification that exceeds the oil and gas industries standards. We are also certified by Bureau Veritas under the OHSAS 18001 health and safety standard and have the ISO 14001 environment standard certification undergoing. Page 4 of 22
2. CERTIFICATIONS AND LICENSING 2.1 CERTIFICATIONS Five certifications assure our organization s good performance in the management of our integral quality, health, safety and environment system. o o o o o Certificate API #Q1-1747 Assures our quality management system under the API SPEC Q1 Standard. Audited by API. Certificate API #ISO-1889, Certificate Icontec #SC 1135 and Certificate IQ Net #CO-SC- 1135 Assure our quality management system under the ISO 9001 Standard. Auditaded by API and the Colombian Technical Standards Institute Icontec. Icontec certification is assured by Onac, Anab and DAR international certification institutes. Certificate API #TS-1631 Assures our quality management system under the ISO/TS 29001 Standard which focuses in the petrochemical and gas industries. Audited by API. Certificate Bureau Veritas #CO237459 Assures our management system concerning safety and occupational health under the OHSAS 18001 Standard of the British Standards Institution (BSI). Audited by Bureau Veritas. RUC Scores the performance of our management system concerning safety, occupational health and environment under the Unique Registry of Contractors standard of the Colombian Oil Industry. Audited by the Colombian Safety Council (Consejo Colombiano de Seguridad). 2.2 LICENSING Licensing issued to Technodrill for the manufacture of drilling string substitutes, cutting of API rotary shouldered and Premium connections and hardbanding application. o o o License API #7-1-1108 Issued by API to stamp the API Monogram in drill string substitutes and rotary shouldered connections manufactured by Technodrill under the API Specificación 7-1 standard as assurance of its compliance. License TMK #C45213061013540: Issued by TMK to cut and repair TMK Premium connections in compliance with TMK Premium Ultra specifications. Hardbanding Applicator License: Issued by Arnco Technology Trust to apply Arnco products according to Arnco procedures. Page 5 of 22
3. SERVICE CENTERS LOCATIONS 3.1 BOGOTA BASE Autopista Medellín, Km 8,5 Vía Bogotá La Vega, Parque Industrial Morelia, Tenjo (Cundinamarca) Tel. (+571) 865-6012, Cel. (+57) 317 641-6795 Bogota Service Center consists of a modern warehouse annexed open area within the Parque Industrial Morelia surrounded by a high level of surveillance and security. The warehouse has an area of 1.600 m 2 and an installed electrical capacity of 100 kwa. with an annexed area for storage of drill pipe, big structures and drilling tools located on technically designed racks. The main building and warehouse are divided as follows: Main Office where the General Management and Administrative Headquarters of the company are located. Offices of the Bogota Operations Management and technical and operative administration of the Bogota Base with office area available for clients. Photo #1 Bogota Base in the city of Tenjo near Bogotá (Cundinamarca) Plant area for work machinery and equipment. Welding area for fabrication and repairing of structures. Storage area with space available for drill pipe and tools of other operations that may require it. Storage area for heavy spare parts placed on heavy racks. Storage room area for small spare parts. Washing area for tools and parts. 3.2 NEIVA BASE: Calle 26 Sur # 6-94, Zona Industrial del Sur TeleFax. (+578) 860-3073, Mobile (+57) 317 641-6775 NEIVA (Huila) - COLOMBIA. Page 6 of 22
Similarly, the Neiva Service Center consists of a modern completely covered warehouse located within the Industrial Zone of the city. The warehouse has an installed electrical capacity of 100 kwa. with an area of 2.000 m 2 divided as follows: Office area for the Base and Service Center administration. Plant area for work machinery and equipment. Photo #2 Neiva Base Welding area for the fabrication of Stabilizers. Storage area for drillpipe and downhole tools. Storage room for smaller parts. Washing area for tools and parts. 3.3 META BASE: Km. 22 Vía Villavicencio-Yopal Cel. (+57) 317 657-4852 & (+57) 317 641-6795 CUMARAL (Meta) - COLOMBIA In the Meta Base we have installations to meet the requirements of our customers in the eastern plains oil area with respect to inspection and repair of drill pipe, casing and tubing; NDT inspection, repair and fabrication of drilling structures; hardbanding and general welding, machine shop and cutting of API connections in CNC lathes. Photo #3 Meta Base in the city of Cumaral near Villavicencio (Meta) Page 7 of 22
The Meta Base has an installed capacity of 100 kwa. with an area of 14,000 m 2 divided as: Office area for the Base and Service Center administration. Over 10,000 mt² storage area for drill pipe and drilling structures. NDT inspection area. Machine shop area. Area for welding and fabrication. Washing area for pipe and tools. 4. SERVICES OFFERED Technodrill offers services of maintenance, NDT inspection (WMPI, LPI, UT), general welding, hardbanding, machining and repairing of tools and equipment and structures used in the petroleum industry, ex. drilling motors, drilling jars, fishing jars, shock tools, jar intensifiers, crossovers, drill pipe, drill bits, substitutes, stabilizers, skids, mud pump modules and other special tools. These services are performed by a team of well trained and highly qualified technicians using our own high-standard equipment and measuring instruments. 4.1 BHA TOOLS SERVICE AND REPAIR Maintenance and service is performed on bottom hole assembly tools (BHA) by qualified technicians who are trained by tool manufacturers instructors following the procedures, manuals, drawings, specifications and technical standards given by the manufacturers themselves or elaborated by Technodrill s engineering department, additionally this is achieved following the API, ASTM, ASME and ASNT standards as applicable. When tools and equipment arrive for service visual inspection and incoming test are performed as applicable, dimensional inspection for all the tool components after disassembly and final tests following re-assembly simulating actual conditions of operation. For repairs genuine parts supplied by the manufacturer of the tools are utilized as well as lubricants and consumables that equal or exceed manufacturer s recommendations. When certain jobs and services are provided by external suppliers, Technodrill previously evaluates or audit them to ensure that the services so provided meet or exceeds our own quality standard. 4.1.1 Service Machinery and Equipment: For technical service and maintenance of down-hole tools Bogotá Service Center accounts with the following equipment: Breakout machine, YUKON brand, in Bogotá Base with a torque capacity of up to 175.000 ft-lbs. to make up and 225.000 ft-lbs. to break out, with digital torque and Page 8 of 22
pressure display to control high and low torques. This machine handles tools from 3 ½ to 13 diameter and up to 3.000 kgs of weight. Jar Tester in Bogotá Base to test BHA tools performance by simulating real down-hole conditions with a capacity of up to 200,000 lbs. on compression and 175,000 lbs. on tension. Photo #4 Breakout in the assembly of a Mud Motor. Over head crane with 4-ton capacity in Bogotá Base to service all machines in the shop. Air compressor with a 160 psi. capacity utilized for cleansing of tools and parts during the service process. Power washing machine for cleansing of parts en pipe to prepare them for inspection and repairs. Manual pump for oil injection. Service tools such as: complete set of wrenches, socket wrenches, screw drivers, screw extractors, torque wrenches of up to 75 ft-lbs., chains and slings of 1 and 3 tons, etc. Other machines and equipment as described in numeral 3.2.1 below. 4.2 MACHINE SHOP AND WELDING In the machine shop and welding section Technodrill offers fabrication and repair of tools and parts utilized in the oil industry. This service is performed by a team of highly qualified and well trained technicians under supervision to comply with our quality standard and customer satisfaction objectives. Fabrication and repair of all types of stabilizer sleeves, string stabilizers and substitutes, crossovers, orienting subs, spools, high pressure flanges, shafts, machining of precision components, cutting of API, Acme and other special threads, racks and rig structures, transport skids, stub welding, hardbanding, tungsten application and pipe straightening are part of our products. Page 9 of 22
4.2.1 Machine Shop Machinery: CNC lathe, MORI SEIKI SL 8B, with 10 (254 mm) spindle, Fanuc control, two axis and one turret CNC lathe, JONES & LAMSON 818, with 8-5/8 (219 mm) spindle, Fanuc control, four axes and two turrets. CNC lathe, JONES & LAMSON 4515B, with 5 (64 mm) spindle, Fanuc control, four axes and two turrets. Foto #5 CNC lathe in fabrication of Baker Connector with premium connection Photo #6 CNC lathe in fabrication of 7 x 8-1/2 API Float Shoe. Two CNC lathes, MAZAK M-5, with 6-1/2 spindle, Fanuc control, two axes and turrets. Page 10 of 22
CNC lathe, CINCINNATI, with 6 spindle (152 mm) and Fanuc control. CNC lathe, NAKAMURA TMC 35, with 2 (50 mm) spindle, Fanuc control, two axes and one turret. Foto #7 CNC lathe in fabrication of Float Valves Two Engine Lathes, MASHTROY, with the following main features: Years of make = 2005 and 2006 Spindle Diameter = 14 (355 mm) and 12 (305 mm). Turning span over bed = 3.4 ft. (1.050 mm.). Length between shock and tailstock = 9.8 ft. (3 mt.). Max. workpiece weight allowance = 4,736 lbs. (2.150 Kg.) Pneumatic kick-off system for fast, safe and precise threading. Two Engine Lathes, MASHTROY, with 3-1/2 (89 mm.) spindle, 59 (1500 mm.) bed length and 22.8 (580 mm.) work piece diameter. Two Engine Lathes, SOFIA CU-582, with 2.9 (of 75mm.) spindle. Photo #8 Machining of Fluid-end in Vertical Lathe. Page 11 of 22
Two Engine Lathes, ARID, with 1.6 (40 mm.) spindle, 6.5 ft. bed length (2 mt.), 8.3 (210 mm.) work piece diameter with grinder machine set up for grinding pieces up to 28 - diameter and 1 ½ tons of weight. Vertical Lathe, STANOSTROITELNIY, with 51 (1300 mm.) work piece diameter, 47 (1200 mm.) of free work height and 3-ton work capacity. Photo #9 Milling of one Integral Blade Stabilizer. Two Universal Milling Machines, CINCINNATI No. 4 and No. 5, with 79 (2 mt.) x 16 (40 cm.) worktable. One Italian Universal Milling Machine, SAIMP No. 5, with 70 (1780 mm) x 16 (40 cm.) worktable and 27 (690 mm) free work height Photo #10 Straightening of one 4 ½ bent Drill Pipe. Three drill pipe straightening machine, TECHNODRILL, 2011 and 2013. Three Radial Drills with a 40 (1 m.) banding by 40 (1 m.) free work height. Page 12 of 22
Three Vertical drills with 1 (25 mm.) spindle, turning radius of 10 ½ (270 mm) and 39 (1 m.) free work height. Three Automatic Saw machines with cutting capacity of 12.6 (320 mm) round piece and 10.6 (270 mm) square piece. Two Bead blasting machines for bead surface treatment of API threaded connections. Cutting Tool Grinder, K.O LEE CO. for fast sharpening of steel bits, reamers, scrapers and mills for the proper service. Two 60-ton hydraulic presses, TECHNODRILL. Breakout machine, TECHNODRILL made 2010, in Neiva Base with capacity of 25,000 ftlbs. to make up and 30,000 ft-lbs. to break out. This machine handles 2-7/8 to 11 OD tools up to 1.000 kgs. in weight. Breakout machine, TECHNODRILL made 2012, in Meta Base with capacity of 120,000 ftlbs. to make up and 150,000 ft-lbs. to break out, digital display to control low and high torques. This machine handles 2-7/8 to 15 OD tools up to 2.000 kgs. in weight. Overead crane, TECHNODRILL 2012, with lifting capacity of 2 tons in Meta Base to handle pipe. Instrumentos de medición relacionados en el numeral 3.3.2 Instrumentos de Inspección Dimensional. 4.2.2 Welding and Hardbanding Equipment Two Electrical Welding Machines, LINCOLN IDEALARC, 250 amps AC-DC. Two Electrical Welding Machines, LINCOLN, 400 amps AC-DC. Two MIG Welding Machines, MILLER 400 and two MILLER 210. Three portable welding generator Machines, MILLER Big Blue D, 400 amps. Photo #11 Manufacturing of one BOP Transportation Skid. Two Portable Hardbanding Machines TECHNODRILL made 2010 and 2012, fully equipped in container with welding machines and hand tools. TIG welding equipment One HYPERTHERM Plasma Cutting Machine. Page 13 of 22
Six Oxyacetylene sets, VICTOR. Photo #12 Hardbanding 4-1/2 HWT at Nabors location. Various hand tools such as motor-tools, grinders, complete set of wrenches, screw drivers, etc. and digital pyrometer. 4.3 NDT INSPECTION SERVICE Technodrill offers NDT inspection services performed by Level II Certified Inspectors for rig equipment, drilling tools, BHA tools, drill pipe, tubing, casing and rig structures at our bases or clients locations. We perform dimensional, visual, wet magnetic particles (WMPI), liquid penetrants (LPI) and ultrasonic (UT) inspections following manufacturer s specifications and API, DS-1, ASTM and ASNT applicable standards. Photo #13 WMPI inspection to drilling tools. Page 14 of 22
For field inspection Technodrill accounts on six (6) Inspection Teams made up of Level II Certified Inspectors, experienced inspection helpers, complete set of certified inspection equipment, hand tools and light trucks. 4.3.1 NDT inspection equipment: NewSonic Mack I UT equipment with various probes and test blocks. Ultrasonic Thickness gauges, Defelsko. Black Light Lamps. Radiometer UV DM-365XA, 0 to 20 W/cm. Radio photometer Spectroline. Jokes Magnaflux 0-8 gauss. Magnetizing Coils, 10 ID and 100,000 A/T capacity. Magnetometer of -20 to +20 Gauss. Portable Durometers for metals and soft materials. Hand instruments such as thread profiles, calipers, rulers, verniers, tapes, etc. 4.4 RIG SERVICE We offer various services to Rig companies including: Fabrications and Welding: Horizontal diesel storage tanks Containment tanks for diesel BOP transportation and test skids Rig skidding frames for cluster drilling Scalper Shaker Skid Racking Board Cable trays Racks for pipe storage Fabrications according to AWS D1.1 and ASME Code Section IX standards Qualified welding teams for work in customer s locations NDT Inspection: Lifting equipment inspection Rig structures inspection Pipe inspection Level III WMPI, LPI, UT, visual and dimensional inspection according to applicable standards Level II certified inspection crews for inspection on site Pipe repair: Rotary shouldered connections according to API Spec 7-2 standard Tubing and Casing connections according to API Spec 5B standard Pipe repair according to API Spec 5CT standard Armacor and Arnco hardbanding Page 15 of 22
Straigthtening Hydrostatic test Machine Shop: Manufacture of Flanges and Spools according to API Spec 6A standard Manufacture and repair of drill string substitutes under API Spec 7-1 Monogram license Manufacture and repair of drill string stabilizers Repair of mud pump modules 4.5 QUALITY CONTROL Quality control is an activity of a great importance to guarantee good performance in our productive processes and the requirements in the final product for the customer. 4.5.1 Quality Control and dimensional instruments: Complete set of internal and external micrometers, MITUTOYO, from 0 to 12 for dimensional inspection of critical tolerances in components. Ring gages to measure external diameters of stabilizers and drill bits. Gages, GAGEMAKER, for dimensional inspection of ring grooves of high and low pressure flanges and spools. MITUTOYO Optical comparator. Set of radius gauges for pulley radii repair. Set of NC and NF standard thread gauges. Sets of telescopic gages for small internal measuring. Calipers Moore & Wright for inside and outside diameters from 0 to 12. Dial indicators of 0.001 precision Vernier calipers from 0 up to 1 mt. Inspection of API and Premium threaded connections instruments include: External Taper Gages, GAGEMAKER. Internal Taper Gages, GAGEMAKER. Lead Gages, GAGEMAKER. Lead Standard Gage, GAGEMAKER. Complete set of Profile Gages for API connections. Complete set of API certified Work Plug and Work Ring Gages. 4.6 IDENTIFICATION AND TRACEABILITY Identification of tools and equipment which we service is performed through visual inspection of the type of tool or equipment, outside diameter or capacity and serial number. For the identification of internal parts and subcomponent, we do it through the visual recognition of Page 16 of 22
each subcomponent, part number and/or heat number. This identification is based on drawings, catalogues and lists of parts supplied by the manufacturers or clients. Traceability is guaranteed with a series of documents and registries which consists of: A) For service of downhole and BHA tools such as motors and jars: We keep a folder indentified by the tool name, size and serial number exclusive for each tool in which the Tool Record, Incoming Reports and the Inspection Reports are filed. Tool Record Registers date, number and information of the following documents as applicable: Receiving and Shipping Notes that indicate the entries and deliveries of the tool. Incoming Reports of the tools each time they are received for service. Inspection Reports of all the internal and external components of the tool in which the utilization of new spare parts is also registered. Internal Work Orders that register the details of the work done. Service Orders generated and directed to external workshops or suppliers. B) For other services such as machining, fabrications, welding, inspections and other repairs: Traceability initiates with the Internal Work Order generated for the respective work to which relevant documents are attached when the service is completed according to the following description of documents and registries: The Internal Work Order (OIT) Registers customer identification, remission and Service Order or Contract number and at the same time properly identifies the tool or equipment to be serviced and registers the Inspection Report. The OIT details the work done and the new parts installed; the following documents are attached as applicable: Remission of client, Client s Service or Purchase Order, Receiving Notes, Inspection Reports, Materials Quality Certificates, Shipping Note or Field Service Ticket Copy of the invoice. This package of the completed and closed Internal Work Orders is filed in an indexed folder for future consultations for a period of up to five (5) years. 5. TRANSPORTATION For transportation we have one 5-ton truck to serve all bases to ensure in-time transportation and delivery of tools equipment to our clients; for light weight loads and transportation of Page 17 of 22
equipment and work teams we have double-cabin trucks; for heavy loads we have 4-ton load capacity lift trucks for loading and unloading heavy tools and parts in all three locations. For transportation of other needs we utilize transport companies previously evaluated by Technodrill to ensure the quality standard that our clients expect. 6. LIST OF MAIN CUSTOMERS Technodrill has attended various services and supplied its own products to customers of the oil industry that we list below as reference. COMPANY ECOPETROL OCCIDENTAL DE COLOMBIA HALLIBURTON SPERRY SUN SAN ANTONIO INT. PETROBRAS SAXON PERENCO TYPE OF SERVICE Rental, repair and maintenance of H/M Jars. Floating equipment supply. Inspection and repair of drill pipe, casing and tubing. Pup Joints and coupling supplies. Machining and manufacturing of tools. Rental, repair and maintenance of H/M Jars. Fabrication of penetrators for electrical submerged pumps. Supply of casing drilling bits. Breakout rental Rental, repair and maintenance of H/M Jars and down-hole motors. Rental of string stabilizers. Supply of floating equipment and float valves. Pup Joints and coupling supplies Repair and maintenance of monels and directional tools. Machine shop and cutting of API connections. Stub welding to Rotors of motors. Repair and maintenance of valves, mud pumps and lifting equipment. Inspection of lifting and drilling equipment. Fabrication of Racking Board. Fabrication and repair of flanges and parts. Machining and fabrication of tools. Pup Joints and coupling supplies. Pipe inspection and repair. Fabrication of flanges, pump plugs, crossovers, subs, saver subs. Repair of fluid-ends. Machining and fabrication of tools. Cutting and repair of API threads. Hardbanding. Installation of electrical systems for electrical submerged pumps. Fabrication of Penetrators for electrical submerged pumps. Rental of H/M Jars. Page 18 of 22
COMPANY NABORS DRILLING CO. PETROWORKS BAKER HUGES INTEQ BAKER OILTOOLS SCHLUMBERGER PACIFIC RUBIALES PETREVEN PETROMINERALES PETROTESTING LUKOIL PARKER DRILLING WEATHERFORD TYPE OF SERVICE Fabrication of Spools, flanges and cross overs. Fabrication of rig skidding frame. Fabrication of BOP transportation skids. Fabrication of diesel containment tanks. Fabrication and repair of drill structures. Drill Pipe and Heavy Weight Hardbanding. Repair of Swivels. Manufacture and repair of subs. Fabrication of flanges. Fluid-end repairs Drill Pipe Hardbanding. Drilling Jars rental. Repair of variable (AGS) stabilizers. Fabrication of Substitutes and Racks. Fabrication of Filter Subs and cross overs. Repair of Bowen fishing tools. Breakout rental Repair and machining of monels Cutting and repair of API threads. Fabrication and repair of subs and crossovers, UBHO, float subs and stabilizer sleeves. Floating equipment supply. Rental, repair and maintenance of Drilling Jars. Machining of API threads Fabrication of Crossovers, Repair of Drill Collars y Casing. Machining of API threads Fabrication of Crossovers. Inspection and repair of Drill Collars. Repair of Fluid-ends Inspection and repair of drill pipe, tubing and casing. PupJoints and coupling supplies. Machining of tools. Rental and repair of Drilling Jars. Installation of electrical systems for electrical submerged pumps. Break out of drill pipe at the rig. Fabrication of spreader beams Fabrication of Scalper Shaker Skid Hardbanding to Drill Pipe and Heavy Weight. Repair of Fluid-ends Diesel containment and storage tanks fabrication Diesel water storage tanks fabrication Fabrication of Scalper skid Page 19 of 22
COMPANY CORPAC STEEL HOCOL PAREX RESOURCES Pipe repair Pipe repair Pipe repair Couplings supply TYPE OF SERVICE Page 20 of 22
SERVICE CENTERS - Photo attachment Works at Technodrill Service Centers TECNOSUPPLY 7 x 8 ½ FLOAT SHOE SAXON DRILLPIPE DE 5 ½ Fabrication of one 7 x 8 ½ Float Shoe in CNC Lathe. Hardband applied to 5 ½ Drill Pipe ECOPETROL 3 ½ TUBING Thread repair and change of Couplings PETREVEN 6 ½ Substitute Cutting one NC-50 Box Connection TECNOSUPPLY 8 ½ INTEGRAL STABILIZER Milling of blades in one Integral Stabilizer. TESCO CORP. 6 ½ CROSSOVER W.M.P.I. to API connections. Page 21 of 22
SERVICE CENTERS - Photo attachment (Cont.) SAN ANTONIO INT. FLUID END Welding process to repair a Fluid-end T-600. TECNOSUPPLY STABILIZER SLEEVE Repair of tungsten layer of a stabilizer sleeve. NABORS OF VENEZUELA BOP transportation skid ready to be delivered. BRINZA. 4 ¾ DRILL PIPE Drill Pipe straigthening PARKER DRILLING CO. SCALPERSHAKER SKID Fabrication of one Scalper Shaker Skid for Rig 271. NABORS DRILL. CO. SKIDDING FRAME ON LOCATION Rig Skidding Frame being installed at Castilla (Meta) Page 22 of 22