series s with and compact housing with digital and analogue warranty features warranty Parallel beams and floating crossbeams with variable amplitude Synchronization by cable. Pitch, 0 and mm Control height up 0mm (pitch mm) and up 0mm (pitch0mm and mm) Maximum operating distance up to m (for mm pitch) and m (for 0mm and pitch) Digital s NPN and PNP ; analogue current ( ma) and analogue voltage (0..), mix s : digital PNP and analogue voltage (0..) Adjustment by teach-in, levels of adjustment Blanking function. Available analogue versions TOP BEAM web contents Application notes Photos Catalogue / Manuals code description E 0 R B / 0-0 V series emitter emitter type receiver receiver type pitch height special function E 0 R A B F 0 0 0 0 0 0 00 0 V TB Area Sensor cubic section Emitter Emitter with I/O standard configuration Receiver Receiver with two analogue s (voltage 0...0 V and current... ma) Receiver with two digital s (NPN and PNP) Receiver with one digital PNP and one analogue (voltage 0...0 V) Pitch mm Pitch 0 mm Pitch mm Controlled height Controlled height mm Controlled height 0 mm Controlled height 0 mm Controlled height 00 mm Controlled height 0 mm Output cable length mm with M pigtail Analog reading last led TOP BEAM (RA)
available models OUTPUT INPUT state logic blanking test adjustment beams number pitch (mm) plot (P/I) () working range (m) detection height 0... mm P 0 mm mm KIT (E + R) E0RB/0-0V E0RB/0- E0RB/0- E0RB/0-0V E0RB/0-0 mm 0 0 mm E0RB/0- E0RB/0-0V NPN + PNP 00 mm 0 mm 0... E0RB/0-0 E0RB/0-0V E0RB/-0V mm E0RB/- 0 mm 0 mm E0RB/- E0RB/-0V 00 mm E0RB/-0 0 mm E0RB/-0V E0RA/0-0V 0... mm P 0 mm E0RA/0- E0RA/0- E0RA/0-0V mm E0RA/0- /NC analog voltage + analog current Teach-In 0 0 mm 0 mm 00 mm 0 mm 0... E0RA/0- E0RA/0-0V E0RA/0-0 E0RA/0-0V E0RA/-0V mm E0RA/- 0 mm 0 mm E0RA/- E0RA/-0V 00 mm E0RA/-0 0 mm E0RA/-0V E0RF/0-0V PNP + analog voltage 0... mm P 0 mm mm 0 mm 0 0 mm 00 mm 0 mm 0... P mm 0 mm 0 mm E0RF/0- E0RF/0- E0RF/0-0V E0RF/0- E0RF/0- E0RF/0-0V E0RF/0-0 E0RF/0-0V E0RF/-0V E0RF/- E0RF/- E0RF/-0V 00 mm 0 mm E0RF/-0 E0RF/-0V () Plot: P = parallel beams, I = crossed beams
technical specifications nominal sensing distance emission operating voltage ripple power consumption (receiver) power consumption (emitter) current voltage drop minimum load resistance leakage current tolerated capacitive load power on delay Teach-In response time operating temperature storage temperature artificial light rejection ambient light rejection IP mechanical protection humidity vibrations shocks cable length connectors / cables housing material optic materials E*R*/**-***V 0.... m (beam pitch mm) 0.... m (beam pitch 0 mm) 0 nm (beam pitch mm) 0 nm (beam pitch 0mm)...0 Vdc <. Vpp... W... W x PNP, x NPN (E0RB); x analog voltage, x analog current (E0RA); x PNP, X analog votlage (E0RF) < 00 ma <. V @ 00 ma Ω 0 μa < 0. μf < sec () (0. x N beams) sec ((0. x (N beams - )) + ) x ms -0 C... C - C...0 C IEC EN 0-- IEC EN 0-- IP % max (no condensation) IEC EN 0-- IEC EN 0-- < m x M, poles, male (E), x M, poles, male (R) painted aluminium RAL00 PMMA () Power on delay with blanking function: ( x N beams) sec
MDO (Minimum Detectable Object) beams step (mm) resolution () (mm) qa beams, - crossed 0 % parallel 0 0 qa beams % - - Qb% crossed-beam ++ range (00%) Qa% () = resolution detected with Teach Gross () = the optics cross beam allows detection of objects with a very small diameter or very thin (such as a sheet of paper or an envelope). For those targets with small diameter, the detecting resolution is less effective exactly in the centre between Emitter and Receiver (see Resolution) as well as at the ends of detection area (near to the sensors); the mentioned detection is obtained in the central area Qa with a width equal to a certain % of the distance between the sensors. plugs E0/**-**-** emitter with test input RB/**-**-** receiver with PNP and NPN Test Supply (-) SYNC_W Teach g/f Blank y/n /NC PNP out Supply (-) NPN OUT SYNC_W RA/**-**-** receiver with analog RF/**-**-** receiver PNP with analog V Teach g/f Blank y/n /NC SYNC_W /NC ANA_V Teach g/f PNP Supply (-) Blank y/n Supply (-) ANA_I ANA_V SYNC_W
electric diagrams of the connections emitter with test input receiver with PNP and NPN BK (Test) VDC Test BK (Ana_V) VDC WH (Sync_w) WH (Ana_I) GY (NC/) PK (Teach G/F) NC VT (Blank Y/N) OR (Sync_W) receiver with analog receiver PNP with analog V VDC VDC BK (Ana_V) BK (PNP) WH (Ana_I) GY (NC/) PK (Teach G/F) NC WH (Ana_V) GY (NC/) PK (Teach G/F) NC G coarse calibration F fine calibration VT (Blank Y/N) OR (Sync_W) VT (Blank Y/N) OR (Sync_W) BK BN RD black brown red BU GY WH blue gray white PK pink VT violet OR orange dimensions (mm) CX/**-** /**-** p... h. H H (barrier height) = h (controlled height) + mm h (mm) 0 0 0 00 0 H (mm) 0
accessories included with all models accessories fixing kit ST.... 0. M 0. 0 R. 0 T insert, two M nuts and split washers included L bracket codice code descrizione description STV S STV S kit di supporti antivibranti per pcs. modelli kit antivibration con altezza basement ottica di 0 for mm barriers with 0 mm protected height kit di supporti antivibranti per modelli con altezza ottica da 00 a 00 pcs. kit antivibration basement for barriers with protected height from,00 mm to,00 mm mm accessories not included code description CDM/0B-00A CDM/0B-00A CDM/0B-0A CDM/0B-00A CDM/0B-00A CDM/0B-0A CDM/0X-00A CDM/0X-00A CDM/0X-0A power connector M, wires, female, axial, cable m PVC power connector M, wires, female, axial, cable 0 m PVC power connector M, wires, female, axial, cable m PVC power connector M, wires, female, axial, cable m PUR power connector M, wires, female, axial, cable 0 m PUR power connector M, wires, female, axial, cable m PUR power connector M, wires, female, axial, cable m PUR power connector M, wires, female, axial, cable 0 m PUR power connector M, wires, female, axial, cable m PUR 0