MAGNETOSTICTIVE TRANSDUCER
|
|
|
- Bennett Morton
- 9 years ago
- Views:
Transcription
1 MGNETOSTICTIVE TRNSDUCER MZ Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...5 Order Code...7 Options & ccessories vailable measurement ranges from mm - Distance and speed (with CNopen) measurement - Displacement speed up to 10 m/s - Linearity up to ±0.02 % - Working pressure up to 350 bar - Working temperature C - Magnetic cursor, or floating cursor for liquids - Protection class IP67 - Output signals: nalog, SSI, CNopen
2 - 2 - TECHNICL DT Model MZ- MZ-C MZ-S Measurement range [mm] 50/ 100/ 130/ 150/ 200/ 225/ 300/ 400/ 450/ 500/ 600/ 700/ 750/ 800/ / 1250/ 1500/ 1750/ 2000/ 2250/ 2500/ 2750/ 3000/ 3250/ 3500/ 3750/ 4000 Measured dimension position position / speed position Measurement range speed [m/s] - depending on the scale - ccuracy of the speed output [%] - <2 - Protection class IP67 Displacement speed [m/s] 10 Displacement force [N] <1 Maximum acceleration [m/s²] 100 Working pressure [bar] 350 (peek max. 500) Linearity [%] ±0,02 (min. ±0,06 mm) ±0,02 (max. 0,04) ±0,02 (min. ±0,06 mm) * Resolution 16 bit (max. noise 5 mvpp) 5 µm (2 µm on request) 5 µm (2 µm on request) Repeatability [mm] <0,01 Hysteresis <0,01 mm <±0,005 % MR Shock test DIN IEC68T g, 11 ms Vibrations DIN IEC68T g, Hz Position read sampling time (see table below) [ms] 0,5 to 3 1 to 4 1 Max. output value 12 V (at V), 30 m (at m) Max. current consumption [m] 70 (at V), 90 (at m) Coefficient of temperature [ppm/ C] Max. output load [kohm] 5 (at V), <0,5 (at m) RS422/485 Standard Protection against polarity inversion yes Working temperature [ C] Storage temperature [ C] Power supply [V] 24, ±20 % Output signal V, m CNopen DS 301 SSI: inär, Gray, 24 bit, 25 bit Electrical connection M12-, M16-connector, cable output M12-, M16-connector, cable output M16-connector, cable output Housing material high grade steel ISI 316 * With option additional linearisation: ±0.005 (min. ±0.015 mm) DIMENSIONS ND SMPLING TIME Sampling time MZ- [ms] 0.5, MR mm 1, MR mm 1.5, MR mm 2, MR mm 3, MR mm Sampling time MZ-C [ms] 1, MR mm 2, MR mm 4, MR >2400 mm Sampling time MZ-S [ms] 1, MR mm 2, MR mm 4, MR >2000 mm Dimension MZ- [mm] Measurement range Measurement range Dimension MZ-C [mm] Measurement range Dimension MZ-S [mm] Measurement range
3 - 3 - TECHNICL DRWING MZ- Dimension MZ- Measurement range 50 to 1000 mm Version MZ-- MZ-- X 12.2 mm 9.5 mm Measurement range 1250 to 4000 mm MZ-: mounting inside a cylinder for strokes over 1000 mm, the non-active zone (55 mm) becomes 60 mm because the tip includes a M4 threaded hole.
4 - 4 - TECHNICL DRWING MZ-C, MZ-S Dimension MZ-C, MZ-S Version MZ-C/S- MZ-C/S- X 12.2 mm 9.5 mm MZ-C, MZ-S: mounting inside a cylinder MZ Grounding
5 - 5 - MGNETIC CURSOR Magnetic cursor C D PCUR PCUR PCUR PCUR026 (for liquids) PCUR027 (for liquids) Note: PCUR026 and PCUR027 is supplied with kit PKIT036 for floating cursor for liquids. Material PCUR026, PCUR027: high grade steel ISI 316 PCUR022 PCUR023 PCUR024 PCUR026/027 ELECTRICL CONNECTION NLOG OUTPUT Wiring diagram analog output connector output M12 MZ-- connector output M16 MZ-- cable output MZ--F Function MZ-- MZ-- MZ-F connection cable for 5 pole MZ-- 5-pole, M12 6-pole, M16 cable, 7-pole K5P..M-S/SW-M12 Output 1 (position): V, m 1 1 grey brown GND output 1 (0 V) 2 2 pink white Output 2 (inverse position): V, 20..4m 3 3 yellow blue GND output 2 (0 V) 2 4 green white Supply blue grey Supply GND 4 6 white black
6 - 6 - ELECTRICL CONNECTION OUTPUT CNopen Wiring diagram output CNopen connector output M12 MZ-C- connector output M16 MZ-C- 2 x connector, 5-pole., M12 (m, f) MZ-C-Y cable output MZ-C-F Function MZ-C- MZ-C- MZ-C-Y MZ-C-F connector, 5-pole, M12 connector, 6-pole, M16 2 x connector, 5-pole, M12 (male, female) cable, 4-pole CN L blue CN H white CN GND (n.c.) n.c Supply red Supply GND black ELECTRICL CONNECTION OUTPUT SSI Wiring diagram output SSI connector output M16 MZ-S- cable output MZ-S-F Function MZ-S- MZ-S-F connector, 6-pole, M16 PVC-cable, 6-pole Data - 1 orange Data + 2 orange / white Clock + 3 green / white Clock - 4 green / white Supply + 5 dark blue / white Supply GND 6 dark blue / white
7 - 7 - ORDER CODE NLOG OUTPUT MZ nalog output Cable length output F Connector output, M12, 5-pole Connector output, M16, 6-pole Cable output, 7-pole PVC cable F meter 2 meter 5 meter 10 meter Measurement range [mm] e.g. 100 Note: Magnetic cursors must be ordered separately (see accessories). nalog output m is available on request. E V output signal m output signal ORDER CODE CNopen OUTPUT MZ CNopen C mm resolution (standard) mm resolution Connector output, M12, 5-pole Connector output, M16, 6-pole Connector output, 2 x M12, 5-pole Cable output, 4-pole PVC cable Y F Measurement range [mm] e.g Cable length output F 1 meter 2 meter 5 meter 10 meter kaud Note: Magnetic cursors must be ordered separately (see accessories). Other aud rates and resolutions are available on request dditional information, like CNopen Data Protocol available on request 1 magnetic cursor 2 magnetic cursors ORDER CODE SSI OUTPUT MZ SSI Connector output, M16, 6-pole Cable output, 6-pole PVC cable S F Cable length output F 1 meter 2 meter 5 meter 10 meter Measurement range [mm] e.g Data length 24 it Data length 25 it G inary data code output Gray data code output Note: Magnetic cursors must be ordered separately (see accessories). Other resolutions are available on request 6 additional linearisation Linearity: ±0.005 (min. ±0.015 mm)
8 - 8 - OVERVIEW ase model, V analog output, M12 connector output MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm MZ mm Options with additional charge on base model ccessories nalog output: PCUR022 magnetic cursor, ø 32.8 F cable output, 7-pole PVC cable, 1 meter PCUR023 magnetic cursor, ø 32.8 with 90 slit E m output signal PCUR024 magnetic cursor, ø cable length 2 meter PCUR026 f loating cursor f or liquids with hole ø cable length 5 meter PCUR027 f loating cursor f or liquids with hole ø cable length 10 meter CUR022 non-magnetic spacer for mounting PCUR022 cursor CNopen: C measurement range: 50 to 550 mm Connection cable analog output, 5-pole, shielded, connector M12 C measurement range: 600 to 2000 mm K5P2M-S-M12 2 m, connector, straight C measurement range: 2250 to 4000 mm K5P5M-S-M12 5 m, connector, straight Y connector output, 2 x M12, 5-pole K5P10M-S-M12 10 m, connector, straight F cable output, 4-pole PVC cable, 1 meter K5P2M-SW-M12 2 m, connector, angular 02 cable length 2 meter K5P5M-SW-M12 5 m, connector, angular 05 cable length 5 meter K5P10M-SW-M12 10 m, connector, angular 10 cable length 10 meter SSI: Cable for CNopen output, 5-pole, shielded, PUR S measurement range: 50 to 550 mm K5P2M-S-M12-CN connector M12, straight, to coupling M12 S measurement range: 600 to 2000 mm K5P2M-S-M12-CN connector M12, straight, open cable head S measurement range: 2250 to 4000 mm K5P2M--M12-CN female connector M12, straight, open cable head F cable output, 6-pole PVC cable, 1 meter 02 cable length 2 meter Connector 05 cable length 5 meter CON022 connector M16, 6-pole, straight, IP67 10 cable length 10 meter CON023 connector M16, 6-pole, angular, IP67 06 additional linearisation: D5-G-M12-S connector M12, 5-pole, straight, IP67 50 to 500 mm D5-W-M12-S connector M12, 5-pole, angular, IP to 1000 mm 1100 to 2000 mm 2250 to 4000 mm Subject to change without prior notice. WayCon Positionsmesstechnik GmbH [email protected] internet: Head Office Mehlbeerenstr Taufkirchen Tel. +49 (0) Fax +49 (0) Office Köln uf der Pehle rühl Tel. +49 (0) Fax +49 (0)
LVDT. Inductive Position Transducer. SM Series. Key-Features:
LVDT Inductive Position Transducer SM Series Key-Features: Content: - Measurement ranges 2...200 mm - External, or cable electronics with cable break detection - Linearity up to ±0.10 % of full scale -
Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
- 1 - Eddy Current. Eddy current distance and displacement transducer
- 1 - Eddy Current Eddy current distance and displacement transducer S eries TX Measurement ranges 0,5...10 mm ne or dual-channel device utputs: 10V, 5V, ±5V, (0)4...20 ma, CAN Linearity ±0,25% of FS High
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
Conductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
550658 D. PARAMETER SPECIFICATION Measured Variable: Displacement
T E M P O S O N I C S L S E R I E S LH 550658 D P r o d u c t S p e c i f i c a t i o n s Temposonics L Series position sensors are available with analog outputs (voltage or current) or digital outputs
Contactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
How To Power A Schen
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
ABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
Electronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
Temperature sensor with integrated transmitter for industrial applications, MBT 3560
Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
Online data sheet PET-1CB010N10SVMC PET PRESSURE SENSORS
Online data sheet PET-1CB010N10SVMC PET B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Pressure type Measuring range Ordering information Other models and
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
sensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model ER Analog and Start/Stop Outputs SENSORS Document Part Number: 550996 Revision E Data Sheet Model ER position
LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
Magnetic Proximity Switches Series CST - CSV and CSH
Magnetic Series CST - CSV and CSH Reed, Electronic»» Designed to fit into the cylinder profile barrel»» 3 models (CST - CSV - CSH) are suitable for all Camozzi s cylinder range»» With or without M8 connector
Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
Magnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
maxon sensor maxon sensor
Sensor Spindle drive Gearhead E Motor (BLD Motor) D Motor X Drives (configurable) Motor control obust encoders, D tachometers, and resolvers with high accuracy and high signal resolution. Due to resonance,
Absolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
TECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
Relative and absolute pressure switch type 529
Relative and absolute pressure switch type 529 Pressure range -1... 0 60 bar The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
Table of Contents, Magnetic Field Sensors. Introduction to Magnetic Field Sensors... 380
Proximity Switches Table of Contents, Magnetic Field Sensors Proximity Sensors.3 Magnetic Field Sensors.2.3 Introduction to Magnetic Field Sensors... 380 Operating Distance and Responsiveness Mounting
Process modules Digital input PMI for 24 V DC inputs for 120 V AC inputs
E031026 000823 Process modules Digital input PMI for inputs for 120 V AC inputs PMI Input E4, E5, GND L- PMI 120 V AC Input E4, E5, Common C E6, E7, GND L- E6, E7, Common C LEDs for the inputs operation
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
Electronic Pressure Switch EDS 3000
For Your Information Electronic Pressure Switch EDS 3000 User Manual Revision: November 01, 2002 1. EDS 3000 Functions The EDS 3000 unit offers the following functions: Display pressure in psi, MPa, or
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
W150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
E2EL Ø 6,5 M8 / Plug M8 M8 / Plug M12 E2EL
High Frequency Inductive Proximity Sensor Increased response frequency for high speed applications Max 5 khz, switching frequency M8 or dia 6.5 mm housing Brass or stainless steel housing Ordering Information
Industrial Bar Code Scanners
DS6400 Industrial Bar Code Scanners Configuration SW Tool ACR4 technology PackTrack APPLICATIONS Automated warehousing Medium conveyor sorting Reading on forklift trucks Picking systems Automated shop
BTL5-S1 -M -HB/WB-FA /F -C Micropulse Linear Transducer - Rod Style
User's Manual Balluff GmbH Schurwaldstraße 9 73765 Neuhausen a.d.f. Germany Phone +49 7158 173-0 Fax +49 7158 5010 [email protected] www.balluff.com 1 Contents 1 Safety Advisory... 2 1.1 Proper application...
MTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter
Thermal Mass meter and Temperature Transmitter Description The MTI10 insertion thermal mass flowmeter and the MTL10 in-line thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
Cross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
BTL5-P1 _-M -HB/WB-FA /F -C Micropulse Linear Transducer - Rod Style
User's Manual Balluff GmbH Schurwaldstraße 9 73765 Neuhausen a.d.f. Germany Phone +49 7158 173-0 Fax +49 7158 5010 [email protected] www.balluff.com 1 Contents 1 Safety Advisory... 2 1.1 Proper application...
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Temp-485-Pt100. A temperature sensor (Pt100 or Pt1000) communicating over the RS-485 bus with a simple communication protocol
Temp-485-Pt100 A temperature sensor (Pt100 or Pt1000) communicating over the RS-485 bus with a simple communication protocol Temp-485-Pt100 Box version [600 113] Temp-485-Pt100 Cable version [600 114]
www.kem-kueppers.com [email protected] Certified according to DIN EN ISO 9001 Technical Datasheet C-Flow Coriolis Mass Flow Meter
www.kem-kueppers.com [email protected] Certified according to DIN EN ISO 9001 Technical Datasheet C-Flow Coriolis Mass Flow Meter Description The coriolis mass flow meters measure simultaneously mass
TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
Relative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range -1... 9 bar / 0... 2.5 1000 bar The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the
QR12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions
Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
Sturdy aluminium housing, anodized in blue Female connector for optical fiber (please order optical fiber separately) Mounting holes
SI-COLO Series SI-COLO2-LWL-HAMP-COL4 - Big measuring range: typ. 25 mm... 40 mm (with optical fiber and attachment optics KL-14 or KL-17) - Large assortment of optical fibers available (reflected or transmitted
Liquid Level Limit Switch liquiphant T FTL 20
Technical Information TI 64F/4/ae Liquid Level Limit Switch liquiphant T FTL 0 Level limit switch for liquids Applications The Liquiphant T FTL 0 is a level limit switch for virtually any kind of fluid
Multifunction devices
devices devices devices, electronic Type Page LED multifunction displays pulse, frequency, time (DC) Codix 524 240 pulse, frequency, time (AC+DC) Codix 544 243 LCD multifunction preset counters 1 or 2
Vert-X 16-5V / 10...90% Ub. Applications Servodrives Dancer arm Operating table
Version MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearity % meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz (5) - Sample
SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type code. TBPN-L1-FDIO1-2IOL Ident no. 6814053.
PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass-fiber reinforced housing Shock and vibration tested Potted module electronics Protection
Encoders. the incremental encoders format such as relective optical technology, transmissive optical technology
the incremental encoders format such as relective optical technology, transmissive optical technology back devices, brakes and gearboxes at no extra cost to you. USA: +1 267 933 2105 Europe: +33 20928751
RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER
Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
HLC A1... HLC B1... HLC F1... Data Sheet. Load cells. Special features. B2325-1.0 en
HLC B1... HLC F1... HLC A1... HLC B1... HLC F1... Load cells Special features -- Hermetically sealed (IP68) -- Max. capacities: 220 kg... 10 t -- Stainless steel -- Low overall height -- Meets EMC/ESD
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
LED...A70..4-..Q Series Sealed High-Intensity
LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for
HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: [email protected] NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
Adjustment functions for both span and shift have been incorporated
SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8
Digital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
Floating Switch FTS 20 Füllstandgrenzschalter Level Limit Switch Détecteur de niveau
KA 180F/00/en/06.01 (a) 52010984 Floating Switch FTS 20 Füllstandgrenzschalter Level Limit Switch Détecteur de niveau Safety instructions The FTS 20 floating switch may only be used as a level limit switch
Pressure and flow control system
Pressure and flow control system RE 30030/04.09 1/32 Replaces: RE 30024/11.03 RE 30027/06.04 RE 30030/01.04 Type SYDFE1, SYDFEE, SYDFEC, SYDFEn Size 18 to 140 Component series 2X Maximum operating pressure
HF series Hall effect joysticks
Distinctive features and specifications 1, 2 & 3 axis configurations Dual sensors for redundancy CANbus J1939 and CANopen options Voltage regulator, 24V supply option USB 1.1 HID interface option ized
FASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
INTMOD485-LH Protocol Converter
For Use with L-GAGE LH Series Sensors Features Converts an LH Network to the 485-RTU protocol Supports baud rates up to 230,400 baud Supports LH Networks with up to 32 sensors Model Protocol Conversion
Temposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensor Accessories
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensor Accessories Includes Installation, Mounting and Application References Current Production and Retrofit Options for R-Series, G-Series
OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
Material: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry EX-Proof Stainless Steel Shaft Encoder - Ø 68 mm Shaft - Ø 10 mm to Ø 5/8 inch Resolution up to 10,000 ppr IP 66 (IP 67 option) ATEX certified EX-Proof IECEx certified EX-Proof
+ Incremental interface
i IEH58-INC-1-GB-1 04/12 Revision 01 010101-00589999-9999 + Incremental interface + Type with hollow through shaft + Modular product line + Extensive parameter setting possibilities + Special parameters
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
PAJ GROUP DEVELOPMENT OF ADVANCED MECHATRONICS
111881-901 version 1.29 WTER IN OIL SENSOR (WIO) Product Overview The WIO-Sensor technology is a secure on-line system monitoring the water content in oil. Water or moisture is the second largest contamination
REGTRONIC OPERATING INSTRUCTIONS
REGTRONIC OPERATING INSTRUCTIONS 1.FEATURES Electrical connection: M12 8-pin connector Preset pressure range 0.05-10 bar with possible full scale regulation. 10 100 mbar adjustable deadband Supply pressure:
Laser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
Product Information. HMC 6 Hybrid Motor Cable
Product Information HMC 6 Hybrid Motor Cable November 2014 HMC 6 Single-cable solution for servo drives Motors normally need two separate cables: One cable for the motor encoder One cable for the motor
IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
OEM-EP Pressure Controllers
Pressure Controllers Typical Applications Carrier Gas Pressure Control Air over Liquid Control Mass Spectrometer Process Gas Supply Pressure Control Miniature ler The Miniature ler converts a variable
Reaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
