The IKM Group 2012
2012 - what now? So 2011 has come to an end. It was another good year for IKM with strong growth in turnover and good growth in our earnings. It s especially satisfying that we as an organisation still manage both! It is a goal for IKM to grow and we have managed to meet this objective also this year! Despite the financial crisis, Euro crisis and financial turmoil in general IKM has actually grown by almost 50 percent in the last three years. Excellent! 2011 began with some uncertainty for several of our companies, but during the second quarter the backlog increased considerably in most of our companies and we experienced shortage of both personnel and equipment. This lasted for the rest of 2011 and has given us a very good start to 2012. It resulted in a record turnover of NOK 3.3 billion for the IKM group. With an EBITDA (earnings before interest, taxes and depreciation) of NOK 340 million. The objective for 2012 is to achieve an even better performance! HSE Policy Positive development Zero injuries is our overall objective. We shall instill trust and confidence among our customers and employees. We shall follow acts and regulations, including ethic code of conduct. HSE is the most important internal work area. No operation has priority over safety. HSE is a line responsibility in the entire organisation. Everyone is responsible for their own safety and the safety of others. We shall prevent pollution and reduce negative environmental impact. We shall reduce the amount of waste and optimise the use of resources. What was especially satisfying in 2011 I would like to mention the following: That IKM Haaland AS made money after the summer (they lost NOK 51 million the previous year). The development in IKM Subsea AS. This company has had a very positive trend all year and achieved an annual profit of approx. NOK 5 million. The increased interaction between the IKM companies. This is something we have focused on in recent years and are now beginning to see the results. Very satisfying! And last and most satisfying: our sick leave trend. This will end up at approx. 3.7 percent for 2011. Far below the national average and also well below the 5 percent average for the industry as a whole. We take this as a sign of good job satisfaction and good working conditions for all our employees! Finally I would like to remind everyone that also 2012 poses major challenges. The oil price is high, there is still a lot of oil and gas in the North Sea and the activity is high. This again gives us a unique possibility to develop IKM further and we will grasp that opportunity. Just like we have done before! We will achieve this through continuous improvement of all processes and systems established in each organisation. Together with our clients and suppliers we shall follow statutory regulations and continually improve our procedures and routines in environmental management. We believe that social commitment will result in savings for our clients, and new business possibilities for the IKM Group. Each IKM company shall establish its own objectives in order to live up to the IKM Group s overall policy. History 1989 Foundation: Instrumentering Kalibrering og Måleteknisk Laboratorium AS (originally Hydrotech Laboratorium AS), renamed to IKM Laboratorium AS 1992 Established: IKM Testing AS 1994 Established: IKM Engineering & Kompetansesenter AS, IKM Mekaniske AS and IKM Kristiansund AS 1995 Acquisitions: Scana Hydrotech AS and Alfred Paulsen Contracting AS 1996 Acquisitions: IKM Engineering AS (Idavoll AS). Established: Dept. in Bergen for IKM Testing AS and IKM Laboratorium AS 1997 Acquisitions: Gjerseth Elektro Contracting AS, Alltex AS (service dept) and Semco Industri AS. Established: IKM Stillas AS 1998 Acquisitions: Kystbasen Vedlikeholds Senter AS and Subsea Design AS. Established: IKM Testing UK Ltd and IKM Testing Asia Pte. Ltd (Singapore) 1999 Acquisitions: Visman AS and IKM Offshore Development AS (Offshore Development AS). IKM Mekaniske AS invests in new workshop in Jåttåvågen 2000 Established: IKM Testing Canada Ltd. and Wellcon AS (34%) 2001 Established: IKM Kran og Løfteteknikk AS 2002 Acquisitions: Everclean International AS, Odim Hitecs dept. for Industrial-automation, Hitec Instrument (80%) and ACGS Pte. Ltd. in Singapore. Established: IKM Testing Spain SL. Share purchase: 34% of Midt-Norsk Stillas AS 2003 Established: IKM Service AS and Merlin Subsea AS. Merger: IKM Stillas AS and IKM Visman AS merge with KAEFER Maritim AS. Change of name: KAEFER IKM AS. Share purchase: 23,29% of Rosenberg Verft AS 2004 Acquisitions: IKM Larsen & Mortensen AS (Steinsvik Maskin-industri, dept. Stavanger), OIS Inspection AS, IKM Ocean Design AS 51% (former JP Kenny Norge AS) and Textrain (UK) Ltd. 2005 Acquisitions: IKM Mekaniske Kristiansund AS (Noomas Offshore AS) Established: IKM Valves AS. Demerger: IKM Elektro AS demerges from IKM Gjerseth Elektro AS, which in turn changes name to IKM Automasjon AS. 2006 Acquisition: IKM Instrutek AS (Instrutek AS) and IKM. Morgenstierne AS (Morgenstierne Tekniske AS). Established: IKM Testing Australia Pty. Ltd. 2007 Acquisition: Subsea Management Systems merged with IKM Consultants AS (Offshore Development AS), IKM Testing dept. Harstad (Altinex Services AS), IKM Årdal Mekaniske AS (Årdal Mekaniske Verksted AS) and IKM Production Technology AS (Altinex Reservoir Technology AS). Established: IKM Production Technology Sdn. Bhd (Malaysia) Sale: IKM Automasjon AS and IKM Mekaniske AS, (fabrication dept.) 2008 Acquisition: IKM DSC Engineering AS (DSC Engineering AS) (67%). Arne Bø Pedersen AS (dept. for bolt working) and Jacobsen Services AS merged with IKM Testng AS. Sale: KAEFER IKM AS and Rosenberg Verft AS (28,4%) 2009 Acquisition: Moland Mekaniske AS. Established: IKM Subsea AS, IKM Operations AS, IKM Maskinering AS (merger of IKM Larsen & Mortensen AS, IKM Årdal Mekaniske AS and Moland Mekaniske AS) 2010 Acquisitions: Project Partner AS, IKM Technique AS (Technique AS), IKM Miljøteknikk AS (Miljøteknikk AS) and IKM Haaland Group AS (Haaland AS, Industrigravøren AS, Haaland Elektronikk AS) and Chem Tech Services Ltd Established: IKM Ocean Design Australia Pty Ltd 2011 Acquisitions: Cleandrill AS, Ceragon Networks AS (instrument- and the calibration dept.), Electro Partner AS, Røntgenkontrollen AS and Norweld Control Services AS Merger: Electro dept. in Electro Partner AS merges with IKM Elektro AS, Marine dept. in ElectroPartner AS merges with IKM Instrutek AS, IKM Miljøteknikk AS merges with IKM Laboratorium AS, IKM Haaland Group AS merges with IKM Gruppen AS, Project Partner AS merges with IKM Consultans AS Established: IKM Cleandrill AS, IKM Subsea Singapore Pte Ltd Sale: Haaland Elektronikk AS No accidents No injuries No exceptions
IKM Group IKM Invest 4500 ELECTRICAL/ INSTRUMENT/ PROCESS SUBSEA/ COMPLETION/ COMMISSIONING ENGINEERING/ OPERATIONS FABRICATION/ INSPECTION IKM EIENDOM AS IKM INDUSTRI- INVEST AS 805 4000 IKM Elektro AS IKM Instrutek AS (Larvik) IKM Laboratorium AS (Tananger) Dept. Sotra Ltd. (Aberdeen) Asia Pte. Ltd. (Singapore) Australia Pte. Ltd. (Perth) IKM Production Technology AS IKM Production Technology Sdn. Bhd (Kuala Lumpur) IKM Valves AS (Stavanger) (67%) IKM Testing AS Dept. Kristiansund Dept. Hammerfest IKM Testing Asia Pte. Ltd. (Singapore) IKM Testing Australia Pty. Ltd. (Perth) IKM Testing Brasil LTDA (Rio de Janeiro) IKM Testing Canada Ltd. (St. Johns) Dept. Halifax Dept. Alberta IKM Testing Kazakhstan LLP (Atyrau) IKM Testing Spain SL (Cadiz) IKM Testing Poland Sp. z.o.o (Gdansk) IKM Testing Thailand Co. Ltd. (Rayong) IKM Testing UK Ltd. (Newcastle) Dept. Aberdeen IKM Consultants AS Dept. Horten IKM DSC Engineering AS (Tranby) (67%) IKM Kran og Løfteteknikk AS (Tananger) IKM Ocean Design AS (Stavanger) (88%) Dept. Trondheim IKM Ocean Design Australia Pty. Ltd (Perth) (88%) IKM Operations AS IKM Service AS IKM Haaland AS (Vigrestad) IKM Industrigravøren AS (Vigrestad) IKM Inspection AS (Stavern) Dept. Grenland Dept. Grimstad Dept. Kristiansand IKM Røntgenkontrollen AS (Rolvsøy) (67%) IKM Maskinering AS (Tau) Dept. Fyresdal IKM Mekaniske AS (Stavanger) Dept. Nærbø IKM Mekaniske Kristiansund AS (Kristiansund) IKM Technique AS (Sandnes) (68%) Commersial property Leased area 61.000 sq.m. Development projects Commercial real estate (100.000 sq.m.) Recreational residentials (40 units) Apartments / housing 20 rental units Company investments Selvaag Bolig ASA (4,7%) The turnover for IKM Invest comprises companies where IKM s owner share is 34% or more. Company investments Noreco ASA (9%) North Energy ASA (3%) Acona AS (34%) Inwind AS (38%) Ingenium AS (34%) Grimstad Konserves AS (67%) Scanfarm AS (67%) Funds Energy Ventures III Energy Ventures IV 670 454 1026 547 1182 3500 3000 2500 2000 PT IKM Indonesia (Batam) 1521 IKM Cleandrill AS (Straume) (51%) 1500 IKM Subsea AS (Bryne) 1346 IKM Subsea Malaysia Sdn.Bhd (Kuala Lumpur) IKM Subsea Singapore Pte. Ltd. (Singapore) 1000 733 500 629 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 B2012 0 Mill. NOK
Electrical / Instrument / Process Engineering / Operations PRODUCT SALES Supply house Instrumentation/electro/electronics/ automation Subsea/topside valves Flow/level instruments Measurement/testing equipment Electrical motors/transformers Thermography equipment Transformer surveillance Calibration/environmental instruments Navigation/communication PRODUCTION System integration Electrical motors/transformers/generators Electrical subsea motors/transformers Pressurised containers Control/enclosure panels Valve parts/valve repair High pressure sample bottles Subsea HPU s Subsea el. actuators Electrical/hydraulic control systems SERVICE, INSTALLATION AND CALIBRATION Pressure, temp, flow, electrical, mechanical and gas density Electrical parameters Valve Site Service (VSS) Pressure safety valves (PSV) Navigation/maritime communication (maritime equipment) Projecting (new build) Field instrumentation Emission measurements (NOX) PROCESS AND WELL TECHNOLOGY Data sampling (pressure, temp, flow, chemical analysis) On-site PVT Well integrity (monitorering/analysis) Process surveillance RENTAL EQUIPMENT/PERSONNEL TRAINING COURSES CONSULTANCY SERVICES Multidiscipline engineering services Project management and project control Procurement and contract services Logistics and MA services Subsea and marine, drilling and well OFFSHORE OPERATION SUP- PORT AND SERVICE PERSONNEL (IKM Service) CUSTOMISED OPERATION SUPPORT TO OPERATORS Operations/maintenance and service personnel Operations and maintenance support Maintenance management Maintenance concepts Spare part strategy Maintenance planning Engineering Support all Disciplines Lifecycle studies Risk evaluation and RBI analysis MARINE PIPELINE ENGINEERING Subsea and pipelines: - Field development - Engineering/design of marine pipelines - Flexible/rigid risers - Installation engineering - Subsea production systems Design and construction of: - Subsea structures - Tie-in modules/systems - Subsea manifold systems CRANE AND LIFTING SERVICES Maintenance, modifications and certification of: - Offshore/ship cranes, lifting equipment - Lifeboats/mob-boats/lifesaving equipment Certification/maintenance/supply/ rental of lifting equipment Delivery of related engineering, mechanical work/fabrication ENGINEERING AND TOTAL DELIVERY OF PASSIVE FIRE AND BLAST PROTECTION SYSTEMS External Fire and Blast walls. Internal Fire walls Explosions Relef panels Heat shield and Wind shield Louvre systems Escape tunnels Glazed partitions and internal partitions Winterization Walls Crane operators Mechanics Flag men Heliguards IKM Elektro AS IKM Instrutek AS IKM Laboratorium AS Ltd. Asia Pte. Ltd. Australia Pte. Ltd. IKM Production Technology AS IKM Production Technology Sdn. Bhd. IKM Valves AS IKM Consultants AS IKM Ocean Design AS IKM Ocean Design Australia Pty. Ltd IKM DSC Engineering AS IKM Kran og Løfteteknikk AS IKM Operations AS IKM Service AS Subsea / Completion / Commissioning Fabrication / Inspection SUBSEA TOPSIDE RENTAL CNC-MACHINING MECHANICAL INDUSTRY INSPECTION SUBSEA Trencher operations ROV operations Survey and Inspection services Offshore management Manufacture of subsea equipment Sale of ROV s Pigging/pipeline inspection/rfo Scale squeeze services Cuttings transport system (CTS) Mud Recovery without Riser (MRR) Pressure and vacuum testing Chemical cleaning Oil flushing/oil cleaning Nitrogen services (N2/He leak testing) Umbilical services Video inspection Bolt working services Decommissioning/passivation Preservation Water as a tool/hydrojetting Air Treatment Pipe labelling/flow coding Certification of accumulators Maintenance of heat exchangers HVAC cleaning Pipe freezing Vacuum Tank Cleaning System (VTCS) Cleaning of slop water (X-clean) Cold cutting/cutting services Cutting/bevelling/flange facing LSA/NORM handling Pumps and tanks Inspection equipment Bolt working equipment Drying and filter units Flanges and plugs Air treatment units Testing equipment TRAINING COURSES CNC thin plate machining 3D measuring Maintentance and modifications Sheet metal/welding and machining Fabrication and Installation Mechanical design / 3D modelling Fabrication of stainless steel products Contracting personnel Material handling and lifting equipment NDT/Material inspection Third party verification ROV-tooling Inspection services Construction of subsea equipment IKM Testing AS IKM Testing Asia Pte. Ltd. IKM Testing Australia Pty. Ltd. IKM Testing Brasil LTDA IKM Testing Canada Ltd. IKM Testing Kazakhstan LLP IKM Testing Poland Sp. Z.o.o IKM Testing Spain SL IKM Testing Thailand Co. Ltd. IKM Testing UK Ltd. PT IKM Indonesia IKM Cleandrill AS IKM Subsea AS IKM Subsea Malaysia Sdn. Bhd IKM Subsea Singapore Pte. Ltd IKM Haaland AS IKM Industrigravøren AS IKM Maskinering AS IKM Inspection AS IKM Røntgenkontrollen AS IKM Technique AS IKM Mekaniske AS IKM Mekaniske Kristiansund AS
Indonesia Thailand Singapore Malaysia Kazakhstan Australia Poland Norway UK Spain Brazil Canada Our focus is growth! Electrical/Instrument/Process Subsea/Completion/ Commissioning Engineering/Operations Fabrication//Inspection www.ikm.com
Subsea/ Completion/ Commissioning IKM Testing AS Ljosheimvegen 14, E: IKMtesting@IKM.no Ågotnes Industripark Pb. 97, 5346 Ågotnes, Norway T: +47 56 31 27 70 E: IKMtesting.Bergen@IKM.no Dept. Kristiansund NorSea Vestbase, Pb. 2223 6503 Kristiansund, Norway T: +47 71 58 07 60 E: IKMtesting.Kristiansund@IKM.no Dept. Hammerfest Bøkkerveien 9 9600 Hammerfest, Norway T: +47 51 64 13 90 E: IKMtesting.Hammerfest@IKM.no IKM Testing Asia Pte. Ltd. 117 Defu Lane 10 Singapore 539229 T: +65 6777 8803 E: IKMtesting@sg.IKM.com IKM Testing Australia Pty. Ltd. 33 Kewdale Road Welshpool WA 6106 Australia T: +61 8 9452 6100 E: IKMtesting@au.IKM.com IKM Testing Brasil LTDA Rua México, 03-11ºandar Rio de Janeiro, RJ 20031-144 T: +55 (21) 3544 0000 E: IKMProposals@ikmltd.co.uk IKM Testing Canada Ltd. 40 St. Anne s Crescent, Paradise, NL A1L 1K1, St Johns, Newfoundland, Canada T: +1 709 782 5051 E: IKMtesting@ca.IKM.com Dept. Halifax 30 Colford Drive, PO Box 100, Head Chezzencook, NS, B0J 1N0, Canada T: +1 902 827 2587 E: IKMtesting@ca.IKM.com Dept. Alberta 10604 151 Street NW Edmont, AB T5P 1V5, Canada T: +780 232 5999 E: IKMtesting@ca.IKM.com IKM Testing Kazakhstan LLP Atambaeva street, 12/A 060005 Atyrau, Republic of Kazakhstan T: +7 (7122) 25 15 69 E: IKMtesting@kz.IKM.com IKM Testing Spain SL Poligono Industrial «El Trocadero» C/Holanda, Nave 23 C.P. 11510 Puerto Real, Cadiz, Spain T: +34 956 47 47 41 E: IKMtesting@es.IKM.com IKM Testing Poland Sp. Z.o.o Ul. Trzy Lipy3, 80-172 Gdansk, Poland E: IKMtesting@pl.IKM.com IKM Testing Thailand Co. Ltd. 72/2 Moo 3, Phala Sub-district Banchang District, Rayong 21130, Thailand T: +66(0) 38601 996/997 E: IKMtesting@th.IKM.com IKM Testing UK Ltd. Unit 42 Coldbourne Crescent, Nelson Park Industrial Estate, Cramlington, Northumberland, NE23 1WB, UK T: +44 1670 707265 E: IKMtesting@uk.IKM.com Dept. Aberdeen Unit 47 Howe Moss Terrace, Kirkhill Industrial Estate, Dyce, Aberdeen AB21 0GR, UK T: +44 1224 75 559 E: IKMtesting.Aberdeen@uk.IKM.com PT IKM Indonesia Mail:Ruko Bukit Beruntung Block C, no. 2, Batam, Indonesia Office:Puri Industrial Park 2000 Jl. Engku Putri, Block C, No. 10A Batam Centre 29453 Indonesia T: +62 778 469211 E: IKMtesting@id.IKM.com IKM Cleandrill AS Straume Teknologisenter, Trollhaugmyra 15. 5353 Straume, Norway T: +47 958 27 109 E: IKMcleandrill@IKM.no IKM Subsea AS Nordlysveien 3, 4340 Bryne, Norway T: +47 962 00 210 E: IKMsubsea@IKM.no IKM Subsea Malaysia 35J-2-9, KLSC, Jalan Wangsu Delima 5 Wangsa Maju 53300 Kuala Lumpur, Malaysia T: +601 9650 6949 E: IKMsubsea@IKM.com IKM Subsea Singapore 48 Loyang Way, Singapore 508740 T: +65 96607629 E: IKMsubsea@IKM.com Electrical/ Instrument/ Process IKM Elektro AS Skvadronveien 24, T: +47 51 81 17 30 E: IKMelektro@IKM.no IKM Instrutek AS Elveveien 28, 3262 Larvik, Norway T: +47 33 16 57 00 E: IKMinstrutek@IKM.no, T: +47 51 20 23 00 E: IKMinstrutek@IKM.no IKM Laboratorium AS NorSea Base, Bygg 53 Pb. 124, 4098 Tananger, Norway T: +47 51 71 95 00 E: IKMlab@IKM.no Kokstadveien 23, 5020 Flesland, Norway T: +47 56 31 27 70 E: IKMlab.Bergen@IKM.no Dept. Sotra Ågotnes Industripark Pb. 97, 5346 Ågotnes, Norway T: +47 56 31 27 70 E: IKMlab.Bergen@IKM.no Ensjøveien 18 0661 Oslo, Norway T: +47 22 78 27 40 E: IKMlab.Oslo@IKM.no Ltd. Howe Moss Terrace, Kirkhill Industrial Estate Dyce, Aberdeen, AB21 0GR, UK T: +44 1224 79 3262 E: IKMms@uk.IKM.com Asia Pte. Ltd. 117 Defu Lane 10 Singapore 539229 T: +65 6777 8803 E: IKMms@sg.IKM.com Australia Pte. Ltd. 33 Kewdale Road Welshpool WA 6106, Australia T: +61 8 9452 6100 E: IKMms@au.IKM.com IKM Production Technology AS Skvadronveien 24 T: +47 51 64 13 40 E: IKMpt@IKM.no IKM Production Technology Sdn. Bhd 35J-2-9, KLSC, Jalan Wangsu Delima 5 Wangsa Maju 53300 Kuala Lumpur, Malaysia T: +601 9650 6949 E: IKMpt@IKM.no IKM Valves AS Gamle Forusvei 25 4033 Stavanger, Norway T: +47 51 71 95 20 E: IKMvalves@IKM.no O J Brochs gate 10 5006 Bergen, Norway T: +47 55 69 11 34 E: IKMvalves.Bergen@IKM.no
Engineering/ Operations IKM Consultants AS T: +47 51 69 51 00 E: IKMconsultants@IKM.no Dept.Bergen Kokstadvegen 23 5257 Kokstad, Norway T: +47 48 89 36 59 / +47 48 95 75 44 E: IKMconsultants.Bergen@IKM.no Dept. Horten Storgt. 38 3182 Horten, Norway T: +47 33 04 27 40 / +47 45 61 09 29 E: IKMconsultants.Horten@IKM.no Dølasletta 3 3408 Tranby, Norway T: +47 45 63 34 16 E: IKMconsultants.Oslo@IKM.no IKM DSC Engineering AS Dølasletta 3 3408 Tranby, Norway T: +47 32 22 65 80 E: IKMdsc@IKM.no IKM Kran og Løfteteknikk AS Tankbåtvegen 1 4056 Tananger, Norway T: +47 51 64 81 00 E: IKMkran@IKM.no IKM Ocean Design AS Vassbotnen 1, Pb. 99 4064 Stavanger, Norway T: +47 51 21 21 00 E: IKModesi@IKM.no Dept. Trondheim Gryta 2B 7010 Trondheim, Norway T: +47 73 19 72 00 E: IKModesi@IKM.no IKM Ocean Design Australia Pty. Ltd 33 Kewdale Road, Welshpool WA 6106 Australia T: +61 08 9452 6100 E: IKModesi@au.IKM.com IKM Operations AS E: IKMoperations@IKM.no IKM Service AS E: IKMservice@IKM.no IKM Invest AS IKM Invest AS Skagenkaien 1 4006 Stavanger, Norway T: +47 51 64 13 80 E: IKMinvest@IKM-invest.no Fabrication/ Inspection IKM Haaland AS Skogateigen 28 4362 Vigrestad Pb. 23, 4369 Vigrestad, Norway T: +47 51 79 20 00 E: IKMhaaland@IKM.no IKM Industrigravøren AS Fabrikkvegen 6 4362 Vigrestad Pb. 23, 4369 Vigrestad, Norway T: +47 51 48 72 30 E: IKMindustrigravoren@IKM.no IKM Inspection AS Holmejordetveien 21A Pb.68, 3291 Stavern, Norway T: +47 33 13 24 50 E: IKMinspection@IKM.no Dept. Kristiansand Lumberveien 51B Pb. 8048, Vågsbygd 4675 Kristiansand, Norway T: +47 38 01 91 50 E: IKMinspection@IKM.no Dept. Grimstad c/o Nymo Mek. Verksted AS Pb. 113, 4891 Grimstad, Norway T: +47 37 29 24 80 E: IKMinspection@IKM.no Dept. Grenland Strømtangveien 11B 3950 Brevik, Norway T: +47 35 55 75 70 E: IKMinspection.east@IKM.no IKM Røntgenkontrollen AS Evjeløkka 7 1661 Rolvsøy, Norway T: +47 69 36 19 50 E: IKMrontgenkontrollen@IKM.no IKM Maskinering AS Breivikveien 17, Nordmarka 4120 Tau, Norway T: +47 51 75 44 44 E: IKMmaskinering.Tau@IKM.no E: IKMmaskinering@IKM.no Dept. Fyresdal Molandsmoen 3870 Fyresdal, Norway T: +47 35 04 15 00 E: IKMmaskinering.Fyresdal@IKM.no IKM Mekaniske AS Jåttåflaten 10 4020 Stavanger, Norway T: +47 51 82 56 00 E: IKMmekaniske@IKM.no Dept. Nærbø Bjorhaug Vest 4365 Nærbø, Norway T: +47 51 79 17 20 E: IKMmekaniske.Naerbo@IKM.no IKM Mekaniske Kristiansund AS Dalegaten 137 6518 Kristiansund, Norway T: +47 70 33 14 00 E: IKMmekaniske.Kristiansund@IKM.no IKM Technique AS Torneroseveien 12 4315 Sandnes, Norway T: +47 51 80 05 20 E: IKMtechnique@IKM.no www.ikm.com