Safety nstructons VEGAVIB VB6*.GI******* Kosha 14-AV4BO-0107 Ex td A20, A20/21, A21 IP66 T** 0044 Document ID: 48578
Contents 1 Area of applcablty... 3 2 General nformaton... 3 3 Techncal data... 3 4 Applcaton condtons... 5 5 Groundng... 5 6 Cable entres... 5 7 Installaton/mountng... 5 8 Tractve force on the suspenson cable... 6 9 Shorten suspenson cable... 6 10 Lockng mechansm of housng cover... 6 Please note: These safety nstructons are part of the documentaton: 29268 - VEGAVIB 61 two-wre 29274 - VEGAVIB 62 two-wre 29280 - VEGAVIB 63 two-wre 48579 - Certfcate Kosha 14-AV4BO-0107 2 VEGAVIB VB6*.GI*******
1 Area of applcablty These safety nstructons apply to the capactve probes of type seres VB60 accordng to the Kosha 14-AV4BO-0107 (certfcaton number on the type label) and to all nstruments wth the number of the safety nstructon (48578) on the type label. 2 General nformaton The VEGAVIB VB6*.GI******* are used for montorng or control of levels also n areas wth combustble, dust generatng bulk solds. VEGAVIB VB6*.GI******* consst of a metal sensor, a process connecton element and a processng unt n a powder-coated Alumnum or stanless steel housng. The VEGAVIB VB6*.GI******* are sutable for use n hazardous atmospheres of combustble dusts, for applcatons requrng EPL-Da, EPL-Da/Db or EPL-Db nstruments. If the VEGAVIB VB6*.GI******* are nstalled and operated n hazardous areas, the general Ex mountng nstructons IEC 60079-14 as well as these safety nstructons must be observed. The operatng nstructons manuals as well as the approprate Ex mountng nstructons and standards for electrcal plants must be observed. The nstallaton of exploson-endangered systems must always be carred out by qualfed personnel. The requrements of IEC 61241-1 e.g. wth respect to dust deposts and temperatures must be fulflled. EPL-Da nstruments The electroncs housng and the sensor wth the mechancal fxng element are nstalled n exploson-endangered areas, n areas requrng EPL-Da nstruments. EPL-Da/Db nstruments The electroncs housng s nstalled n hazardous areas requrng EPL-Db nstruments. The process connecton elements are nstalled n the separatng wall, whch separates areas requrng EPL-Db or EPL-Da nstruments. The sensor wth the mechancal fxng element s nstalled n hazardous areas requrng EPL-Da nstruments. EPL-Db nstruments The electroncs housng and the sensor wth the mechancal fxng element are nstalled n exploson-endangered areas, n areas requrng EPL-Db nstruments. 3 Techncal data Electrcal data VEGAVIB VB6*.GI**C** wth ntegrated electroncs module VB60C VB6*.LK: only VB61, VB63 Voltage supply: (termnals 1, 2) Output Domestc current requrement Load current ƲƲ mn. ƲƲ max. U = 20 253 V AC, 50/60 Hz or U = 20 253 V DC, max. 1 W U m = 253 V AC Contactless electronc swtch <3 ma (va load crcut) 10 ma 400 ma VEGAVIB VB6*.GI******* 3
VEGAVIB VB6*.GI**R** wth ntegrated electroncs module VB60R VB6*.LK: only VB61, VB63 Voltage supply: (termnals 1, 2) Max. power consumpton Relay crcut (max. values) ƲƲ Contact set 1: (termnals 3, 4, 5) ƲƲ Contact set 2: (termnals 6, 7, 8) 20 253 V AC, 50/60 Hz U = 20 72 V DC U m = 253 V AC 1 8 VA, 1.6 W 253 V AC, 3 A, 500 VA 253 V DC, 1 A, 41 W VEGAVIB VB6*.GI**T** wth ntegrated electroncs module VB60T VB6*.LK: only VB61, VB63 Voltage supply: (termnals 1, 4) Max. power consumpton Max. load current, floatng transstor output (termnals 2, 3): 10 55 V DC U m = 253 V AC 0.5 W 400 ma, 55 V DC VEGAVIB VB6*.GI**Z** wth ntegrated ntrnscally safe electroncs module VB60Z Power supply and sgnal crcut: (termnals 1[+], 2[-] n electroncs compartment; For connecton to a certfed, ntrnscally safe crcut. In gnton protecton type ntrnsc safety Ex a IIC wth double chamber housng verson n connecton compartment) Maxmum values: U = 30 V I = 131 ma P = 983 mw The effectve nternal capactance C s neglgble. The effectve nternal nductance L s neglgbly small. The ntrnscally safe crcuts are electrcally separated from parts whch can be grounded. The metal parts of VEGAVIB VB6*.GX/CK**Z** are electrcally connected to the ground termnals. VEGAVIB VB6*.GI**N** wth ntegrated ntrnscally safe electroncs module VB60N Power supply and sgnal crcut: (termnals 1[+], 2[-] n electroncs compartment; For connecton to a certfed, ntrnscally safe crcut. In gnton protecton type ntrnsc safety Ex a IIC wth double chamber housng verson n connecton compartment) Maxmum values: U = 20 V I = 103 ma P = 516 mw The effectve nternal capactance C s neglgble. The effectve nternal nductance L s < 5 µh. The ntrnscally safe crcuts are electrcally separated from parts whch can be grounded. The metal parts of VEGAVIB VB6*.GI**N** are electrcally connected to the ground termnals. 4 VEGAVIB VB6*.GI*******
4 Applcaton condtons Permssble ambent temperature On the sensor, category 1D or 2D VEGAVIB VB61/63.GI******* -40 +150 C VEGAVIB VB62.GI******* -40 +80 C In hgh temperature verson (VEGAVIB VB61/63.GI*******) -40 +250 C On the electroncs housng, category 1D or 2D VEGAVIB VB61/62/63.GI******* -40 +60 C Surface temperature ncreases On the sensor, category 1D or 2D VEGAVIB VB61/62/63.GI******* Process temperature +3 K On the electroncs housng, category 2D VEGAVIB VB61/62/63.GI***Z/N** VEGAVIB VB61/62/63.GI***C/R/T** On the electroncs housng, category 1D VEGAVIB VB61/62/63.GI***Z/N** VEGAVIB VB61/62/63.GI***C/R/T** Ambent temperature +17 K Lmted to 98 C by the temperature lnk Ambent temperature +12 K Lmted to 98 C by the temperature lnk Permssble operatng pressure on the sensor The process pressure durng operaton n hazardous atmosphere must be between 0.8 1.1 bar. The permssble combnatons of pressure and temperatures wthout hazardous atmospheres are mentoned n the manufacturers' nstructons (the operatng nstructons manuals). Protecton ratng Protecton accordng to EN 60529 Sensor, category 1D or 2D IP 68 Electroncs housng, category 1D or 2D IP 66 5 Groundng The VEGAVIB VB6*.GI******* must be grounded. 6 Cable entres The cable entry sent wth the delvery s sutable for the housng temperature range specfed n the VEGAVIB VB6*.GI******* certfcate. If a dfferent cable entry s used, the separately certfed cable entry/gland (accordng to ATEX) determnes the max. permssble ambent temperature on the housng (max. values: -40 C, +98 C). 7 Installaton/mountng VEGAVIB VB63.******* and VEGAVIB VB67.******* must be mounted n a way that adequately ensures that the sensor and the extenson tube wll not bend due to the movements of other nstallatons or bulk solds n the vessel. VEGAVIB VB6*.GI******* 5
8 Tractve force on the suspenson cable The permssble tractve force s 3000 N wth VEGAVIB VB62.*******. 9 Shorten suspenson cable On request the length of the suspenson cable of VEGAVIB VB62.******* can be shortened on ste accordng to customer-specfc requrements. For ths purpose, the enclosed operatng nstructons manuals must be observed. 10 Lockng mechansm of housng cover Wth sgnal chamber housng versons, the housng cover must be tghtened completely before startng the setup of the nstrument. It must be secured wth the cover locjng. Wth double chamber housng versons, the housng cover of the connecton compartment and the housng cover of the electroncs compartment must be screwed n completely before startng the setup of the nstrument. They must be secured wth the respectve cover lockng. 6 VEGAVIB VB6*.GI*******
Notes VEGAVIB VB6*.GI******* 7
Prntng date: All statements concernng scope of delvery, applcaton, practcal use and operatng condtons of the sensors and processng systems correspond to the nformaton avalable at the tme of prntng. Subject to change wthout pror notce VEGA Greshaber KG, Schltach/Germany 2014 VEGA Greshaber KG Am Hohensten 113 77761 Schltach Germany Phone +49 7836 50-0 Fax +49 7836 50-201 E-mal: nfo.de@vega.com www.vega.com