> > Port size: /4 (ISO G or NPT), G/ > > Working from 0 bar up > > Short switching times > > Suited for fine vacuum down to,33 x 0 - mbar > > For a.c. solenoid systems with integrated rectifier (40... 60 Hz) > > Variable valve solenoid combination Technical features Medium: For neutral gaseous and liquid fluids (with contaminated fluids, upstream installation of a dirt trap is recommended) Operation: Direct solenoid operated poppet valve Operating pressure: 0... 40 bar (0... 580 psi) Orifice:,5... mm Port size: G/4, /4 NPT, G/ Flow direction: Fixed Mounting position: Optional, preferably with solenoid on top Ambient/Media temperature: NBR: -5... +80 C (-3... +76 F) FPM: -0...+0 C (+4... +48 F) Water +95 C (+03 F) EDPM: -40... +40 C (-40... +84 F) FFPM: -0...+40 C (+4... +84 F) PTFE: -50...+0 C (-58... +356 F) Depending on solenoid system and seal materials. Air supply must be dry enough to avoid ice formation at temperatures below + C (+35 F). Material: Housing: brass.040 (Ms 58) Seals: NBR other see option selector Inner parts: stainless steel.404 (0 F), brass.040 (Ms 58) Further versions Operating pressure to 50 bar; Seat seals FPM, EPDM, FFPM, PTFE, Rubin; Assembled oil and grease-free Flow conversion: Cv US Gallon/min (water) = l/min (air) x 0,00 Kv m³/h (water) = l/min (air) x 0,000906 Technical data Housing: Brass, Seals: NBR -5... +80 C (-3... +76 F) Symbol Port size Orifice Flow Operating pressure Weight Dimension Solenoid Model (mm) (l/min) (bar) (psi) (kg) (lbs) No. group *) G/4,5 70 0... 40 0... 580 0, 0.46 3B 950000 G/4 0 0... 35 0... 507 0, 0.46 3B 950000 /4 NPT 0 0... 35 0... 507 0, 0.46 3B 950300 G/4 3 00 0... 0 0... 45 0, 0.46 3C 9500300 0 /4 NPT 3 00 0... 0 0... 45 0, 0.46 3C 9503300 G/4 4 350 0... 0... 74 0, 0.46 3D 9500400 /4 NPT 4 350 0... 0... 74 0, 0.46 3D 9503400 G/4 6 550 0... 5 0... 7 0,5 0.55 6D 950600 /4 NPT 6 550 0... 5 0... 7 0,5 0.55 6D 9504600 G/ 700 0... 0... 4 0,8.76 4 6D 950700 0 G/4 00 0... 0 0... 90 0, 0.46 3 3B 9500 G/4 3 60 0... 0 0... 45 0, 0.46 3 3B 95030 *) When ordering please indicate solenoid, voltage and current type (frequency). without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH en 5.4.304.0
Option selector 950X X Orifice (mm) Substitute,5 3 3 4 4 6 6 7 Material seat seal Substitute NBR 0 EDPM FPM PTFE only orifice,5... 4 NC 3 FFPM 4 Rubin only orifice... 3 NC 5 Voltage Substitute 4 V d.c. 0400 30 V a.c. 3050 Solenoid Substitute See solenoid table en 5.4.304.0 without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH
Solenoids group 3B, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) Protection class IP/NEMA 8,0 33 IP65 (with 9, 40 IP65 (with 8,0 33 IP65 (with - 9, - 40 IP65 (with Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) II 3 D Ex td A T 0 C II 3 D Ex td A T 0 C 6,9-89 - IP66 II G Ex mb IIC T4 Gb II D Ex mb IIIC T0 C Db - 8,7-34 IP66 II G Ex mb IIC T4 Gb II D Ex mb IIIC T0 C Db 3,9-6 - IP66 (with - 5,3-3 IP66 (with 3,9-6 - IP66 (with - 5,3-3 IP66 (with 3,9-6 - IP66 (with 5,3 3 IP66 (with 5,5 8 NEMA 4, 4X, 5,9 6 NEMA 4, 4X, IP66 IP66 Electrical connection -0... +60 Special included -0... +60 Special included -0... +60 Cable length 3 m -0... +60 Cable length 3 m T4: T4: T4: T4: T4: T4: Weight Drawing Circuit diagram Model (kg) No. No. 0,5 046 0,6 7 306 0,6 36 0,6 6 3 0,4 5 4 09 0,4 5 7 093 M0 x,5 *) 0,5 6 4 40 M0 x,5 *) 0,5 6 7 4 / NPT *) 0,8 7 0 460 / NPT *) 0,8 7 46 M0 x,5 *) 0,8 7 0 46 M0 x,5 *) 0,8 7 463 0,5 8 37 0,5 8 5 373 Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/5008. 00% duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 09x KEMA 0 ATEX 347 X IECEx DEK 3.004X N/en 7..505 3x, 38x EC-Declaration of Conformity N/en 7..570 37x, 38x CSA-LR 576-6 N/en 7..575 ATEX IECEx 4xx KEMA 98 ATEX 445 X IECEx KEM 09.0068X N/en 7..580 46xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en 7..585 without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH en 5.4.304.03
Solenoids group 3C, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) Protection class IP/NEMA, 504 IP65 (with,3 49 IP65 (with, 504 IP65 (with,3 49 IP65 (with Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) II 3 D Ex td A T 30 C II 3 D Ex td A T 0 C 0,7 446 IP66 II G Ex mb IIC T4 Gb II D Ex mb IIIC T0 C Db,4 54 IP66 II G Ex mb IIC T4 Gb II D Ex mb IIIC T0 C Db 8,9 369 IP66 (with 0,0 IP66 (with 8,9 369 IP66 (with 0,0 IP66 (with 8,9 369 IP66 (with 0,0 IP66 (with 8,9 369 NEMA 4, 4X, 9,5 4 NEMA 4, 4X, IP66 IP66 Electrical connection -0... +60 Special included -0... +50 Special included -0... +40 Cable length 3 m -0... +40 Cable length 3 m T4: -40... +65 T5: -40... +55-40... +65 T4: -40... +65 T5: -40... +55-40... +65 T4: -40... +70 T6: -40... +40-40... +70 T4: -40... +70 T6: -40... +40-40... +70 T4: -40... +70 T6: -40... +40-40... +70 T4: -40... +70 T6: -40... +40-40... +70 Weight Drawing Circuit diagram Model (kg) No. No. 0,7 000 0,60 6 304 0,7 37 0,7 6 39 0,4 5 4 090 0,4 5 7 09 M0 x,5 *) 0,5 6 4 40 M0 x,5 *) 0,5 6 7 4 / NPT *) 0,8 7 0 460 / NPT *) 0,8 7 46 M0 x,5 *) 0,8 7 0 46 M0 x,5 *) 0,8 7 463 0,5 8 374 0,5 8 5 375 Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/5008. 00% duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 09x KEMA 0 ATEX 347 X IECEx DEK 3.004X N/en 7..505 3x, 38x EC-Declaration of Conformity N/en 7..570 37x, 38x CSA-LR 576-6 N/en 7..575 ATEX IECEx 4xx KEMA 98 ATEX 445 X IECEx KEM 09.0068X N/en 7..580 46xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en 7..585 en 5.4.304.04 without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH
Solenoids group 3D, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) Protection class IP/NEMA 6,9 703 IP65 (with 9,5 75 IP65 (with,4 475 IP66 (with 5, 66 IP66 (with,4 475 IP66 (with 5, 66 IP66 (with,4 475 IP66 (with 5, 66 IP66 (with 3,6 567 NEMA 4, 4X, 5,7 68 NEMA 4, 4X, Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) IP66 IP66 T4: T4: T4: T4: T4: T4: Electrical connection Weight Drawing Circuit diagram Model (kg) No. No. 0,7 3 0700 0,3 4 6 3703 M0 x,5 *) 0,5 6 4 0 M0 x,5 *) 0,5 6 7 / NPT *) 0,8 7 0 4630 / NPT *) 0,8 7 463 M0 x,5 *) 0,8 7 0 463 M0 x,5 *) 0,8 7 4633 0,5 8 376 0,5 8 5 377 Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/5008. 00% duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 3x, 38x EC-Declaration of Conformity N/en 7..570 37x, 38x CSA-LR 576-6 N/en 7..575 4xx KEMA 98 ATEX 445 X IECEx KEM 09.0068X N/en 7..580 46xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en 7..585 without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH en 5.4.304.05
Solenoids group 6D, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) Protection class IP/NEMA 6,9 703 IP65 (with 7,3 75 IP65 (with 6,9 703 IP65 (with 7,3 75 IP65 (with,4 475 IP66 (with 5, 66 IP66 (with,4 475 IP66 (with 5, 66 IP66 (with,4 475 IP66 (with - 5, 66 IP66 (with 3,6 567 NEMA 4, 4X, 5,7 68 NEMA 4, 4X, Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) II 3 D Ex tda IP65 T30 C II 3 D Ex tda IP65 T0 C IP66 IP66 Electrical connection Weight Drawing Circuit diagram Model (kg) No. No. 0,6 3 0800 0,35 4 6 3803-0... +60 Special included 0,7 3 387-0... +50 Special 0,36 4 6 389 included T4: M0 x,5 *) 0,5 6 4 480 T4: T4: T4: T4: T4: M0 x,5 *) 0,5 6 7 48 / NPT *) 0,8 7 0 4680 / NPT *) 0,8 7 468 M0 x,5 *) 0,8 7 0 468 M0 x,5 *) 0,8 7 4683 0,5 8 386 0,5 8 5 387 Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/5008. 00% duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 37x, 38x CSA-LR 576-6 N/en 7..575 4xx KEMA 98 ATEX 445 X IECEx KEM 09.0068X N/en 7..580 46xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en 7..585 en 5.4.304.06 without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH
Accessories Electrical connection Cable gland Protection class Ex e, Ex d 7530-803 Page 7 Thread Cable Ø (mm) Materials Protection class (ATEX) Model M0 x,5 5... 8 Nickel plated brass II GD Ex e 058889 M0 x,5 0... 4 Nickel plated brass II GD Ex d 058885 / NPT 7,5...,9 Nickel plated brass II GD Ex d 058895 M0 x,5 9... 3 Stainless steel.457 (36 Ti) II GD Ex e 0589385 M0 x,5 7... Stainless steel.4404 (36 L) II GD Ex d 0589395 M0 x,5 0... 4 Stainless steel.4404 (36 L) II GD Ex d 0589387 M0 x,5 5... 9 Plastic (PA) 00854 M0 x,5 6... Plastic (PA) 00855 057075 () Drawings - Valve Dimensions in mm Projection/First angle 9 9,5 75,5 ~ 0 7 9 8,5 9,5 ~ 0 36 36 G /4 6 3 4 7 9 9,5 46,5 7 9 9, ~ 0 ~ 86 ~ 40 75 G / ~ 5,4 ~ 0 36 M4 x 6 mm deep without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH en 5.4.304.07
Drawings - Solenoid Dimensions in mm Projection/First angle 38 7 46 79 3 86,5 4 53,5 49 5 63,5 59 96,5 34 7 M6 x,5 8 7 5 6 07 33 4 8,5 89 54,5 34 48 M6 x,5 8 4,5 5,5 M6 x,5 9,5 8 7 M6 x,5 9,5 8 7 64,5 7 3 4 0± 0, 9,5 63,5 73 can be indexed by 4x90 Ø 6 or 3 (with spacer tube) en 5.4.304.08 without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH
7 70,5 8 / NPT Dimensions in mm Projection/First angle 0 53 4,5 3 4,5 + 59 56 63 84 33,5 6 4 9 Ø 6 or 3 (with spacer tube) 3 M0 x,5 or / NPT 4 Flying leads AWG ( long) Circuit diagrams 4 5 6 7 0 T T Cable gland C C A B C ø D Model B D B D M0 x,5 9 36 5... 8 058889 M0 x,5 6,5 7,5 9... 3 0589385 M0 x,5 4 39 0... 4 4 058885 A A / NPT 5 58 7,5...,9 4 058895 M0 x,5 4 39 7... 4 0589395 058895 only M0 x,5 0 34 0... 4 4 0589387 M0 x,5 9 36 5... 9 4 00854 M0 x,5 9 36 6... 4 00855 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. (006-50e) 05 Norgren GmbH en 5.4.304.09