Schüco Door ADS 65 The new Schüco Door ADS 65 is suitable for economical entrance solutions in conjunction with very good thermal insulation. Optional fittings also allow it to be used as a multi-purpose door and integrated in the building security and building management system. In conjunction with the Schüco facade and window systems, the modern design gives the developer numerous design options for the building envelope. The modern entrance solution for efficient building envelopes that require thermal insulation. Die Vorteile auf einen Blick U f value 2.31 W/m 2 K 147 mm face width Barrel hinge, infinitely adjustable in three dimensions Almost flush-fitted rosette Burglar-resistant up to WK2 (as ADS 65 HD up to WK3) Optional Residential Line (RL), SoftLine (SL) or Heavy Duty door (HD) models Automatic door seal Easy-access solutions Concealed hinges Leaf-enclosing infill panel Emergency fittings Emergency exit switch Access control / door manager Radio control Integration in building management system 03.2009/Web Schüco ADS 65 1-22
Technical Information Material Aluminium Type of construction Thermally insulated Doors 03.2009/Web Schüco ADS 65 2-22
CAD-Drawings Schüco ADS 75.SI inward Drawing dxf (dxf/509 KB) Drawing dwg (dwg/167 KB) Schüco ADS 75.SI inward Drawing dxf (dxf/507 KB) Drawing dwg (dwg/167 KB) Schüco ADS 75.SI inward Drawing dxf (dxf/410 KB) Drawing dwg (dwg/138 KB) Schüco ADS 75.SI Interlock section of double leaf rebated door inward Drawing dxf (dxf/365 KB) Drawing dwg (dwg/127 KB) 03.2009/Web Schüco ADS 65 3-22
Schüco ADS 75.SI outward Drawing dxf (dxf/501 KB) Drawing dwg (dwg/167 KB) Schüco ADS 75.SI outward Drawing dxf (dxf/507 KB) Drawing dwg (dwg/167 KB) Schüco ADS 75.SI outward Drawing dxf (dxf/378 KB) Drawing dwg (dwg/130 KB) Schüco ADS 75.SI Interlock section of double leaf rebated door outward Drawing dxf (dxf/365 KB) Drawing dwg (dwg/127 KB) 03.2009/Web Schüco ADS 65 4-22
Schüco ADS 70.HI inward Drawing dxf (dxf/545 KB) Drawing dwg (dwg/176 KB) Schüco ADS 70.HI inward Drawing dxf (dxf/462 KB) Drawing dwg (dwg/154 KB) Schüco ADS 70.HI inward Drawing dxf (dxf/369 KB) Drawing dwg (dwg/127 KB) Schüco ADS 70.HI Interlock section of double leaf rebated door inward Drawing dxf (dxf/362 KB) Drawing dwg (dwg/125 KB) 03.2009/Web Schüco ADS 65 5-22
Schüco ADS 70.HI outward Drawing dxf (dxf/542 KB) Drawing dwg (dwg/176 KB) Schüco ADS 70.HI outward Drawing dxf (dxf/455 KB) Drawing dwg (dwg/152 KB) Schüco ADS 70.HI outward Drawing dxf (dxf/363 KB) Drawing dwg (dwg/125 KB) Schüco ADS 70.HI Interlock section of double leaf rebated door outward Drawing dxf (dxf/367 KB) Drawing dwg (dwg/127 KB) 03.2009/Web Schüco ADS 65 6-22
Schüco ADS 65 inward Drawing dxf (dxf/440 KB) Drawing dwg (dwg/146 KB) Schüco ADS 65 inward Drawing dxf (dxf/357 KB) Drawing dwg (dwg/125 KB) Schüco ADS 65 inward Drawing dxf (dxf/318 KB) Drawing dwg (dwg/111 KB) Schüco ADS 65 Interlock section of double leaf rebated door inward Drawing dxf (dxf/230 KB) Drawing dwg (dwg/88 KB) 03.2009/Web Schüco ADS 65 7-22
Schüco ADS 65 outward Drawing dxf (dxf/426 KB) Drawing dwg (dwg/160 KB) Schüco ADS 65 outward Drawing dxf (dxf/341 KB) Drawing dwg (dwg/122 KB) Schüco ADS 65 outward Drawing dxf (dxf/308 KB) Drawing dwg (dwg/110 KB) Schüco ADS 65 Interlock section of double leaf rebated door outward Drawing dxf (dxf/223 KB) Drawing dwg (dwg/85 KB) 03.2009/Web Schüco ADS 65 8-22
Schüco ADS 60 (Export) inward Drawing dxf (dxf/357 KB) Drawing dwg (dwg/121 KB) Schüco ADS 60 (Export) inward Drawing dxf (dxf/315 KB) Drawing dwg (dwg/110 KB) Schüco ADS 60 (Export) inward Drawing dxf (dxf/231 KB) Drawing dwg (dwg/87 KB) Schüco ADS 60 (Export) inward Drawing dxf (dxf/227 KB) Drawing dwg (dwg/86 KB) 03.2009/Web Schüco ADS 65 9-22
Schüco ADS 60 (Export) outward Drawing dxf (dxf/337 KB) Drawing dwg (dwg/117 KB) Schüco ADS 60 (Export) outward Drawing dxf (dxf/313 KB) Drawing dwg (dwg/110 KB) Schüco ADS 60 (Export) outward Drawing dxf (dxf/232 KB) Drawing dwg (dwg/88 KB) Schüco ADS 60 (Export) outward Drawing dxf (dxf/227 KB) Drawing dwg (dwg/87 KB) 03.2009/Web Schüco ADS 65 10-22
Schüco ADS 50 inward Drawing dxf (dxf/351 KB) Drawing dwg (dwg/160 KB) Schüco ADS 50 inward Drawing dxf (dxf/312 KB) Drawing dwg (dwg/107 KB) Schüco ADS 50 inward Drawing dxf (dxf/226 KB) Drawing dwg (dwg/85 KB) Schüco ADS 50 inward Drawing dxf (dxf/146 KB) Drawing dwg (dwg/63 KB) 03.2009/Web Schüco ADS 65 11-22
Schüco ADS 50 outward Drawing dxf (dxf/339 KB) Drawing dwg (dwg/118 KB) Schüco ADS 50 outward Drawing dxf (dxf/310 KB) Drawing dwg (dwg/109 KB) Schüco ADS 50 outward Drawing dxf (dxf/228 KB) Drawing dwg (dwg/86 KB) Schüco ADS 50 outward Drawing dxf (dxf/192 KB) Drawing dwg (dwg/77 KB) 03.2009/Web Schüco ADS 65 12-22
Manuals Fabrication Manual 1-1 Conditions of Use Introduction List of contents Technical information Statics Icon overview Abbreviations index Drawings index Art. No. index Schüco AWS K18009 Attachments to structure - Thermal insulation composite systems K18010 Attachments to structure - Clinker masonry K18011 Attachments to structure - Rear-ventilated curtain walling K18012 Attachments to structure - Concrete curtain walling K18013 Attachments to structure - Monolithic external wall k10942 Cutting + preparation - Meeting rail Turn/Tilt, Turn+Turn, Turn k10982 Cutting + preparation - H/V vent profile k10983 Cutting + preparation - Reverse rebate profile for vertical pivot window k10984 Cutting + preparation - Reverse rebate profile - horizontal pivot vent K18195 Cutting + preparation - TipTronic horizontal pivot vent profile k18196 Cutting + preparation - TipTronic horizontal pivot window k18119 Cutting + preparation - Easy-access door K18327 Cutting + preparation - Insert profile K18338 Installation - Sealing of horizontal joint k18160 Cutting + preparation - Spandrel panel bar K1000139 Cutting + preparation - Removing mitre-cut glazing beads K1000140 Cutting + preparation - Glazing rebate insulation for fixed light K1000191 Cutting + preparation - Glazing rebate insulation for vent frame k15209 Cutting and preparation - Flyscreen, frame and mesh K15205 Cutting and preparation - Flyscreen, fixed frame K15206 Cutting and preparation - Flyscreen, hinged frame K15208 Cutting and preparation - Flyscreen, hinged frame K15199 Cutting and preparation - Flyscreen, tilt/slide k10986 Drainage + ventilation - Inward k18014 Drainage + ventilation - Inward 03.2009/Web Schüco ADS 65 13-22
Schüco AWS BS K10992 Drainage + ventilation - Concealed + drainage cap K1000211 Drainage + ventilation - Drainage sealing k10990 Drainage + ventilation - Outward K18181 Drainage + ventilation - TipTronic outward- k10991 Drainage + ventilation - Top Swing k10985 Drainage + ventilation - Horizontal + vertical pivot window k10993 Assembly - Modular drilling jig K18002 Corner cleats - Drilling templates OF 90 K18003 Corner cleats - Drilling templates OF 90 k18004 Corner cleats - Drilling templates VF 90 K10987 Corner cleats - Outer frame installation K10988 Corner cleats - Vent frame assembly k10994 Corner cleats - Assembly of hinged corner cleat K10996 Corner and T-cleats - Assembly of 90 /135 corners K18005 T-cleat - Drilling templates 90 K18018 T-cleat - Drilling templates 90 K10997 T-cleats - Fabricated by customer k10995 T-cleat - Overview k10989 T-cleats - Assembly K18000 T-cleat - Assembly of hinged T-cleats k10999 T-cleat - Assembly of sash bar glazing K18001 T-cleat - Use of T-supports k18006 Assembly - Corner mullion, round k18007 Assembly - Corner mullion, round k18049 Glazing guidelines - Glazing gaskets k18050 Assembly - Centre gasket K18039 Instructions for the saw - DGL, B2A, B50 k18035 Crimping knives and stop block - EVM k18263 Overviews - CC machine 280 106 / 282 293 k18036 Crimping knives and stop block - EVM k18262 Overviews - CC machine 280 106 / 282 293 K18087 Cutting + preparation - Vent sash bar K18093 Cutting + preparation - Glazing gasket K18109 Cutting + preparation - Glazing the vent 03.2009/Web Schüco ADS 65 14-22
Schüco AWS WF K18234 Cutting + preparation - Floating window k18107 Drainage + ventilation - Inward k18111 Corner and T-cleats - Drilling patterns K18110 T-cleat - fabricated by customer k18108 Glazing guidelines - Glazing gaskets k18064 Crimping knives and stop block - EVM Schüco ADS K18112 Cutting + preparation - T joints for AKF 4/6/8 stacked milling blades k18102 Drainage + ventilation - Inward k18111 Corner and T-cleats - Drilling patterns K18110 T-cleat - fabricated by customer k18104 Drilling patterns - corner cleats k18105 Corner and T-cleats - Drilling patterns K18106 T-cleats - Drilling patterns K18103 T-cleat - Fabricated by customer k18113 Crimping knives and stop block - EVM K15612 Cutting + preparation - Insert profile door + seal k15613 Cutting + preparation - Anti-finger-trap door K15425 Drainage + ventilation - Door leaf made from continuous profile K1000106 Drainage + ventilation - Adjustable sill K15625 Drainage + ventilation - Adjustable sill K15504 Corner and T-cleats - Drilling patterns K15511 Corner and T-cleats - Drilling patterns K1000107 Corner and T-cleats - Drilling patterns K15624 - Corner cleat assembly for reverse rebate profile; double-leaf doors k15619 T-cleats - fabricated by the customer k1000108 T-cleats - fabricated by the customer K15553 Fixed sill - Continuous leaf, inward-, single-leaf k15561 Fixed sill - Continuous leaf, inward-, double-leaf k15555 Fixed sill - Double-leaf door, continuous, inward- K15559 Fixed sill - Continuous leaf, outward-, single-leaf K15562 Fixed sill - Total Flügel außen öffn. Double-leaf k15560 Fixed sill - Double-leaf door, continuous, outward- 03.2009/Web Schüco ADS 65 15-22
K15714 Adjustable sill - Inward- K15715 Adjustable sill - Outward- K15607 Adjustable sill - Inward-, double-leaf door K15631 Flush threshold - Continuous leaf, inward-, double-leaf K15632 Flush threshold - Continuous leaf, outward-, double-leaf K15627 Flush threshold profile - Inward- double-leaf door K15628 Flush threshold profile - Inward- double-leaf door k15629 Flush threshold profile - Outward double-leaf door k15630 Flush threshold profile - Outward double-leaf door k15610 Brush seal - Continuous leaf, inward- k15611 Brush seal - Continuous leaf, outward- K15718 Brush seal - Inward/outward- sill rail K1000085 Brush seal - Inward- sill rail K1000086 Brush seal - Outward- sill rail k15616 Automatic door seal - Continuous leaf, outward-/inward-, single-leaf k15618 Automatic door seal - Continuous leaf, outward-, double-leaf k15617 Automatic door seal - Continuous leaf, inward-, double-leaf K15720 Automatic door seal - Outward- sill rail, single-leaf K15721 Automatic door seal - Outward- sill rail, double-leaf K15563 Installation - Rebate make-up piece k15564 Installation - Flush-fitted meeting stile profiles k15605 Installation - Meeting stile profiles, face-fitted K15604 Installation - Swing door/right-hand K15538 Installation/fabrication - Leaf-enclosing infill panel k15051 Installation/fabrication k18049 Glazing guidelines - Glazing gaskets k15443 Crimping knives and stop block - EVM k1000119 Crimping knives and stop block - EVM Schüco AWS 50.NI Statics k18168 Inward- window - Face-fitted K18170 Inward- windows - Face-fitted additional sections K18203 Inward- windows - Flush-fitted K18172 Tilt/slide - Without e/m 130 kg / with e/m 150 kg K18169 Horizontal/vertical pivot window - Face-fitted 03.2009/Web Schüco ADS 65 16-22
k18171 Outward window - Face-fitted Schüco ADS 50.NI k18225 Cutting + preparation - Double-vent profile k18206 Cutting + preparation - H/V vent profile K18207 Cutting + preparation - Reverse rebate profile for vertical pivot window k18208 Cutting + preparation - Reverse rebate profile for horizontal pivot vent k18204 Drainage + ventilation - Inward k18205 Drainage + ventilation - Outward- K18218 Drainage + ventilation - Horizontal + vertical pivot window k18209 Drilling patterns - corner cleats K18211 Corner cleats - OF installation K18212 Corner cleats - OF assembly k18213 Corner cleat - Assembly of hinged corner cleat K18210 T-cleat - Drilling templates 90 K18216 T-cleat - fabricated by customer K18214 T-cleat - Overview k18215 T-cleats - Assembly K18217 T-cleat - Assembly of hinged T-cleats k18224 T-cleat - Assembly of sash bar glazing k18219 Overviews - CC machine 280 106 / 282 293 Statics k09985 Doors, inward- k10248 Doors, inward k09984 Outward- doors k10249 Outward- doors k10250 Doors, inward - Sills k10251 Outward- doors - Sills k09986 Inward/outward- doors - Sills k10252 Inward/outward- doors - Anti-finger-trap door k10002 Corner cleat - Installation k10485 Corner cleat - Swing door k09994 Flush threshold profile - Inward- k12173 Flush threshold profile - Outward- k12172 Flush threshold profile - Inward- double-leaf door k09993 Flush threshold profile - Outward double-leaf door 03.2009/Web Schüco ADS 65 17-22
Schüco AWS 65 Statics k09996 Adjustable sill k10254 Attachment of threshold k09990 Door cover plates - Rebate make-up piece k09991 Door cover plates - Meeting stile profile k10951 Inward- window - Face-fitted K18116 Inward- window - Easy-access threshold K10952 Inward- windows - Face-fitted TipTronic k10954 Inward- window - Face-fitted corner mullion K10957 Inward- window - Face-fitted vent sash bar K18038 Inward- window - Face-fitted Design window K10959 Inward- window - Flush-fitted K10958 Tilt/slide - Without/with engagement mechansim K10953 Horizontal/vertical pivot window - Face-fitted K18194 Horizontal + vertical pivot vents - Face-fitted TipTronic k10956 Outward window - Face-fitted k10955 Outward window - Face-fitted k18180 Outward window - Face-fitted TipTronic Schüco ADS 65 / Schüco ADS 65 HD Statics k15503 Doors, inward- - Flush-fitted k15509 Doors, inward - Sills K15708 Doors, inward- - Sills for sill rail profiles k15513 Doors, inward - flush-fitted full-leaf infill k15507 Outward- doors - Flush-fitted k15508 Outward- doors - Flush-fitted k15510 Outward- doors - Sills K15707 Doors, outward- - Sills for sill rail profiles K15514 Doors, outward- - Flush-fitted full-leaf infill k15505 Doors, inward - Face-fitted k15515 Doors, inward- - Face-fitted full-leaf infill k15516 Inward-/outward- doors - Toplight AWS k15536 Inward/outward- doors - Anti-finger-trap door 03.2009/Web Schüco ADS 65 18-22
k1000090 Doors, inward- - Flush-fitted K1000091 Doors, inward- - Sills with continuous vent K1000122 Doors, inward- - Sills for sill rail profiles k1000092 Outward- doors - Flush-fitted k1000093 Outward- doors - Flush-fitted K1000094 Doors, outward- - Sills with continuous vent K1000123 Doors, outward- - Sills for sill rail profiles k1000115 Inward-/outward- doors - Toplight AWS k1000109 Inward/outward- doors - Anti-finger-trap door Schüco AWS 65 RL Statics K10960 Inward- window - Face-fitted Design window K10961 Tilt/slide - Without/with engagement mechansim Schüco ADS 65 RL Statics k15517 Doors, inward- - Flush-fitted K15520 Doors, inward - Flush-fitted sills k15518 Doors, inward - Face-fitted k15533 Corner and T-cleats - Drilling patterns K15556 Overviews - CC machine Schüco ADS 65 SL Statics k15506 Doors, inward - Face-fitted k15535 Corner and T-cleats - Drilling patterns K15557 Overviews - CC machine Schüco AWS 65 BS Statics k18058 Inward- window - Face-fitted K18231 Inward- window - Floating window K18059 Tilt/slide - Without/with engagement mechansim Schüco AWS 65 WF 03.2009/Web Schüco ADS 65 19-22
Statics K18332 Inward- window - Mullions/transoms K18333 Inward- window - Top/bottom light K18334 Inward- window - Top/bottom light K18335 Inward- window - Top/bottom light K18336 Inward- window - Design options K18337 Inward- windows - Door installation General information Technical information Schüco - The company AWS 50.NI page 1-13 AWS 65 page 1-44 AWS / ADS 65 page 1-62 AWS / ADS 65 page 1-70 AWS / ADS 65 page 1-77 AWS / ADS 65 page 4-8 System products page 1-17 System products page 1-18 System products page 1-19 Conditions of Use Introduction General information Order Manual 1-1 Manual Corrections List of contents Technical information Icon overview Abbreviations index Art. No. index Overview of profiles Schüco AWS 50.NI/ADS 50.NI Profiles Window sections Door sections Glazing options Corner and T-joints 03.2009/Web Schüco ADS 65 20-22
Tools for this series Schüco AWS 65/ADS 65 Profiles Window sections Door sections Glazing options Corner and T-joints Arched head Tools for this series Schüco AWS 65 RL/ADS 65 RL Profiles Window sections Door sections Glazing options Corner and T-joints Tools for this series Schüco ADS 65 SL Profiles Door sections Glazing options Corner and T-joints Tools for this series Schüco AWS 65 BS Profiles Window sections Glazing options Corner and T-joints Tools for this series Schüco AWS 65 WF/ADS 65 WF Profiles Window sections Door sections Glazing options Corner and T-joints Tools for this series System products System products for all series General accessories 03.2009/Web Schüco ADS 65 21-22
Flyscreen System-based security Schüco window sill system Standard profiles Adhesives and sealants Surface protection Screws and accessories Hand tools General information Important information Technical information Schüco - The company 03.2009/Web Schüco ADS 65 22-22