TURNER 70 Luminaire for circulation area lighting
TURNER 70 OUTDOOR LIGHTING THE LIGHTING SOLUTION FOR CIRCULATION AREA LIGHTING Lighting spaces with outdoor traffic flows (around housing, railway platforms, etc.) demands the use of luminaires that meet specific constraints associated with the presence of the public, the needs of lighting performance and energy efficiency, as well as responding to the need for aesthetic integration. Such urban environments are demanding - lighting must withstand pollution, impacts and UV-related ageing without requiring much maintenance. The TURNER 70 range of luminaires has been designed specifically for this purpose. Its tubular design is known for its simplicity, purity and timelessness; it fits readily into your architectural design, playing its part in your project s visual identity and aesthetics. Designed to DELIVERING THE RIGHT AMOUNT OF LIGHT The linear light output is optimised to achieve the required levels of lighting for external traffic (from 20 to 100 lux). We have selected the most suitable light engine (LED & driver modules) best suited to your needs. YEAR-ROUND SENSOR-DRIVEN OPERATION The selected LED technology guarantees immediate 100% light output and efficient operation even at very low temperatures. Insensitive to repeated switching on and off, it is the ideal solution for sensor- or timer-controlled lighting. SAVING ENERGY > Details of the TURNER 70 gear tray The TURNER 70 range incorporates the latest generation of high efficiency (lm/w) LED modules to reduce lighting energy consumption. To contribute to environmental protection, they are available with DALI dimming, offering multiple lighting management solutions (presence detection, accounting for natural light, control of light levels, etc.). GLARE CONTROL We have developed a satinised diffuser whose diffusion capacity is a balance between performance and visual comfort, so as to avoid glare and provide maximum visual comfort. ADAPTING TO TECHNOLOGICAL CHANGE The electronic components, LEDs and drivers all have very long life and can be easily replaced and upgraded to extend the lifetime of the luminaire and/or improve its performance and consumption in response to changes in technology.
Our luminaires have robust envelopes that are required in industrial environments, protecting them from the ordeals of the urban environment: they are pollution-resistant, can tolerate intensive use, are robust, and have durable sealing, etc. NO YELLOWING OF THE DIFFUSER The TURNER 70 range has composite anti-yellowing diffusers that protect them from solar UV radiation. With a polycarbonate body, they are protected by a co-extruded methacrylate layer which acts as a protective barrier against solar UV radiation. INNOVATIVE DESIGN FOR EASE OF MAINTENANCE By separating installation and maintenance, Sammode offers installers and maintenance teams a sealed fixture with an incredibly simple solution. The sealing of the end cap and the gland is adjusted once and for all when the luminaire is installed. Maintenance is performed from the side opposite to the mains supply side, thus preserving the installation s quality (sealing, direction of the light). DEVELOPED TO WITHSTAND THE URBAN ENVIRONMENT Our fixtures are designed to withstand shocks up to IK10. The robustness of the envelope and the quality of the materials and components are guarantees of a long-term investment. WEATHER- AND DUST-RESISTANCE The complete sealing (rated to IP68) of our luminaires ensure than they maintain their performance throughout their lifetime. Sealed by construction, they resist high-pressure jetting (rated to IP69K). 5-YEAR GUARANTEE Sammode embodies its commitment to the quality and sustainability of its luminaires by offering a guarantee for its tubular ranges that exceeds the legal warranty. A Sammode product isn t a consumable; it s an investment! Integrates Close n Connect innovation for easy maintenance > Maintenance requires no access to the cable
TURNER 70 OUTDOOR LIGHTING CASE STUDY: EXTERNAL WALKWAY TURNER 70 s intrinsic qualities make it a luminaire ideally suited for lighting outside walkways. It achieves an average illuminance of 100 lux at floor level, recommanded in the construction of residential buildings providing access for those with disabilities. 1.50 m 30 m 4 m Luminaires used: TUR70 15M830 POME 113 SA Installation height: 2.5 m Results: Total consumption = 150 W Calculated average illuminance: 103 lux Uniformity: 0.59
CASE STUDY: STATION PLATFORM The TURNER 70 was designed to optimise lighting installations for railway platforms. Suitable for awnings, it creates an average illuminance of 100 lux at floor level, required by EN 12464-2, and with minimum consumption. 6.60 m 50 m 5 m Luminaires used: TUR70 15M830 POME 113 SA Installation height: 3.7 m Results: Total consumption = 600 W Calculated average illuminance: 106 lux Uniformity: 0.5 To optimize your installation, contact Sammode or our local representative
182 Turner 70 Circulation areas - Outdoor lighting three-dimensional trademark LED Design: Sammode Studio Impervious tubular light fitting for outdoor circulation areas Photometry LED technology Instantaneous full light output on ignition over the entire temperature range of use Designed for repeated switching on and off Housing Ø70 mm special LED coextruded polycarbonate/pmma satinised diffuser for use in outdoor lighting End caps 1/2 ring press-formed in 304L stainless steel (316L also available) Gaskets moulded in EPDM Cable entry with nickel-coated brass cable gland for cable Ø 5-12 mm Gear tray with LED modules White powder coated steel sheet gear tray with patented system for automatic connection on closing (Close n Connect) and rotational indexing Light mixing chamber Aluminium heat sink High-efficiency LED modules (145lm/W): - Service life: 50 000h L80/B10 - Colour temperature: 3000K or 4000K - CRI > 80 - Replaceable modules Integrated 220/240V 50/60Hz driver with constant current output (also available as dimmable version) Installation Connection to a 2.5 mm² terminal block fixed on the end cap supporting the cable entry Fixing with 2 stainless steel straps using an HSHC screw with variable centre distance and allowing a 360 orientation (available with tamper-resistant Torx screw) Easy maintenance Patented system with automatic electrical connection on closure (Close n Connect) Maintenance without tampering with the cable by removal of the end cap without cable entry Electronic components (LED and driver) have a very long lifetime (50 000h) and can be easily replaced to extend the life of the luminaire and contribute to the sustainability of the investment and to environmental protection ƞ=100% Electrical class Class II Supply voltage 220/240V 50/60Hz Fire resistance 650 C Sealing IP66, IP68 and IP69K Shock resistance IK10 Operating temperature -20 C +35 C
183 Variable centre distance Accessory: Cable plate: code CP00481 Principal part numbers Power Light output (lm) Designation Part No. Optics L (mm) Weight (kg) 3000K versions 16W 1625 TUR70 CL2 13M830 POME 113LN SA BCV 1470 0170 995 1.7 21W 2165 TUR70 CL2 14M830 POME 113LN SA BCV 1470 0180 1275 2.3 25W 2700 TUR70 CL2 15M830 POME 113LN SA BCV 1470 0190 1560 3.0 30W 3250 TUR70 CL2 16M830 POME 113LN SA BCV 1470 0200 1840 3.7 4000K versions 16W 1625 TUR70 CL2 13M840 POME 113LN SA BCV 1470 0210 995 1.7 21W 2165 TUR70 CL2 14M840 POME 113LN SA BCV 1470 0220 1275 2.3 25W 2700 TUR70 CL2 15M840 POME 113LN SA BCV 1470 0230 1560 3.0 30W 3250 TUR70 CL2 16M840 POME 113LN SA BCV 1470 0240 1840 3.7 Class II luminaires with a dimming option require an earth connection. Options DESCRIPTION OPTION CODE DESCRIPTION OPTION CODE Cable entries Disconnectable plug IP68/IP69K plug, lockable with an aluminium threaded ring: 2 pole connectors PS2 5 pole connectors (with dimmable gear unit) PS5 Disconnectable cord (length 0.80 m) Output cord with a WIELAND IP68 plug: 2 pole connectors CW2 Gear units Electronic gear unit for DALI dimming RD Electronic gear unit for push-button dimming RS Finishings End caps and fixing straps in 316L stainless steel MR Internal colour gelatine LFXXX (Colour XXX to be defined from the Lee Filter colour chart) Fixing Reinforced fixing straps with tamper-resistant Torx screw BCVT Option codes to be added to or to replace the designation codes of main references, subject to the compatibility of options.
Sammode 24 rue des Amandiers, 75020 Paris, France T +33 (0)1 43 14 84 90 F +33 (0)1 47 00 59 29 www.sammode.com Photos : Rodrigo Rojas We reserve the right to make technical changes Sammode - 06/2014 european area version