Quik Setup Guie Strt Here MFC-J450DW MFC-J470DW MFC-J475DW Thnk you for hoosing Brother, your support is importnt to us n we vlue your usiness. Your Brother prout is engineere n mnufture to the highest stnrs to eliver relile performne, y-in n y-out. Plese re the Prout Sfety Guie first efore you set up your mhine. Then, plese re this Quik Setup Guie for the orret setup n instlltion. Mnuls in Spnish for this moel re ville on the enlose CD-ROM. Mnules en Espñol pr este moelo están isponiles en el CD-ROM inluio. WARNING CAUTION IMPORTANT WARNING inites potentilly hzrous sitution whih, if not voie, oul result in eth or serious injuries. CAUTION inites potentilly hzrous sitution whih, if not voie, my result in minor or moerte injuries. IMPORTANT inites potentilly hzrous sitution whih, if not voie, my result in mge to property or loss of prout funtionlity. Notes tell you how to respon to sitution tht my rise or give tips out how the opertion works with other fetures. Unpk the mhine n hek the omponents Most of the illustrtions in this Quik Setup Guie show the MFC-J470DW. The omponents inlue in the ox my iffer epening on your ountry. Strter Ink Crtriges Blk Yellow Cyn Mgent Quik Setup Guie CD-ROM Bsi User s Guie Prout Sfety Guie Telephone Line Cor If your omputer oes not hve CD-ROM rive, you n ownlo the rivers from your moel s ownlo pge t http://solutions.rother.om/. For more informtion, see pge 3. WARNING Plsti gs re use in the pking of your mhine. Plsti gs re not toys. To voi the nger of suffotion, keep these gs wy from ies n hilren n ispose of them orretly. Sve ll pking mterils n the ox in se for ny reson you must ship your mhine. USB le You nee to purhse the orret USB le. We reommen using USB 2.0 le (Type A/B) tht is no more thn six feet (two meters) long. USA/CAN Version 0
Remove the protetive tpe n film overing the mhine, n lso from the LCD. Remove the plsti g ontining the ink rtriges from on top of the pper try. Lift the snner over until it loks seurely into the open position. 2 Connet Mke sure you hve ll the omponents. the power or n telephone line Connet the telephone line or. Connet one en of the telephone line or to the jk mrke LINE on the mhine. Crefully guie the telephone line or into the le hnnel n out the k of the mhine. Connet the other en to moulr wll jk. IMPORTANT DO NOT onnet the USB le yet (if you re using USB le). Connet the power or. If you o not pln to use the fx feture on this mhine, go to step 3 on pge 4. To prolong the life of the print he, provie the est ink rtrige eonomy n mintin print qulity, we o not reommen unplugging the mhine frequently n/or leving the mhine unplugge for extene perios of time. Eh time you plug the mhine in, it utomtilly lens the print hes, whih uses some of your ink. IMPORTANT The telephone line or MUST e onnete to the jk mrke LINE on the mhine. We reommen using to power own the mhine. Using llows miniml power to the mhine, resulting in perioi, ut less frequent, lening of the print hes. 2
Lift the snner over to relese the lok. Gently push the snner over support own n lose the snner over using oth hns. 3 If you re shring one telephone line with n externl telephone nswering mhine, onnet it s shown elow. Before you onnet the externl telephone nswering mhine, remove the white protetive p from the EXT. jk on the mhine. 2 CAUTION Be reful not to pinh your fingers when the snner over loses. If you re shring one telephone line with n externl telephone, onnet it s shown elow. Before you onnet the externl telephone, remove the white protetive p from the EXT. jk on the mhine. Protetive p Set the reeive moe to Externl TAD if you hve n externl nswering mhine. See Choose the orret Reeive Moe on pge 0. For itionl etils, see Conneting n externl TAD (telephone nswering evie) in hpter 6 of the Bsi User s Guie. 2 3 Extension telephone Externl telephone Protetive p 3
3 Instll the ink rtriges CAUTION If ink gets in your eyes, wsh it out with wter t one n ll otor if you re onerne. Mke sure you instll the Strter Ink Crtriges inlue with your mhine first. Mke sure tht the power is turne on. The LCD will show No Ink Crtrige. Open the ink rtrige over. Unpk the ink rtrige. Turn the green relese lever on the ornge protetive pking ounterlokwise until it liks to relese the vuum sel. Then remove the ornge protetive pking s shown. IMPORTANT DO NOT shke the ink rtriges. If ink stins your skin or lothing, wsh with sop or etergent t one. DO NOT touh the rtrige in the re inite, s this n use the mhine not to funtion with the rtrige. 2 Remove the ornge protetive prt. 2 Do not throw wy the ornge protetive prt. You will nee it if you trnsport the mhine. 4
e f Tke re to mth the stiker olor with the rtrige olor s shown in the igrm elow. Instll eh ink rtrige in the iretion of the rrow on the lel. Gently push the k of the ink rtrige mrke PUSH until it lthes. After ll the ink rtriges re instlle, lose the ink rtrige over. 2 IMPORTANT DO NOT tke out ink rtriges if you o not nee to reple them. If you o so, it my reue the ink quntity n the mhine will not know the quntity of ink left in the rtrige. DO NOT repetely insert n remove the rtriges. If you o so, ink my seep out of the rtrige. One you open n ink rtrige, instll it in the mhine n use it up within six months of instlltion. Use unopene ink rtriges y the expirtion te written on the rtrige pkge. DO NOT ismntle or tmper with the ink rtrige, this n use the ink to lek out of the rtrige. Brother strongly reommens tht you o not refill the ink rtriges provie with your mhine. We lso strongly reommen tht you ontinue to use only Genuine Brother Brn replement ink rtriges. Use or ttempte use of potentilly inomptile ink n/or rtriges in the Brother mhine my use mge to the mhine n/or my result in unstisftory print qulity. Our wrrnty overge oes not pply to ny prolem tht is use y the use of unuthorize thir prty ink n/or rtriges. To protet your investment n otin premium performne from the Brother mhine, we strongly reommen the use of Genuine Brother Supplies. The mhine will prepre the ink tue system for printing. This proess will tke pproximtely four minutes. Do not turn off the mhine. We reommen you perform the next step while witing. 5
4 Lo plin Letter/A4 pper Pull the pper try ompletely out of the mhine. Gently press n slie the pper with guies n then the pper length guie to fit the pper size. Mke sure tht the tringulr mrks on the pper with guies n pper length guie line up with the mrk for the pper size you re using. Mke sure the first printe pge is Letter/A4 size. 3 Open the output pper try over. 2 3 Fn the stk of pper well to voi pper jms n misfees. Alwys mke sure tht the pper is not urle or wrinkle. 6
e Gently put the pper into the pper try print sie own n top ege first. Chek tht the pper is flt in the try. IMPORTANT Be reful tht you o not push the pper in too fr; it my lift t the k of the try n use pper fee prolems. f Gently just the pper with guies to the pper with oth hns. Mke sure tht the pper with guies touh the eges of the pper. g h Close the output pper try over. Slowly push the pper try ompletely into the mhine. When you use Legl size pper, press n hol the universl guie relese utton s you slie out the front of the pper try. i While holing the pper try in ple, pull out the pper support until it liks, n then unfol the pper support flp. 2 7
5 Chek the print qulity When the preprtion proess hs finishe, the LCD shows Lo Pper n Press Color Strt. Press Color Strt. Chek the qulity of the four olor loks on the sheet. (lk/yellow/yn/mgent) If ll lines re ler n visile, press (Yes) to finish the qulity hek n go to the next step. OK If lines re missing, press 2 (No) n follow the steps on the LCD. Poor e f Enter the two igits for the month on the il p, n then press OK. Enter the two igits for the y on the il p, n then press OK. Press or to hoose 2h Clok or 24h Clok, n then press OK. Enter the time on the il p, n then press OK. (2h Clok only) Press or to hoose AM or PM, n then press OK. 6 Set the te n time The LCD isplys the te n time. You n lso the urrent te n time to eh fx you sen y setting your Sttion ID (see step 0). Enter the lst two igits of the yer on the il p, n then press OK. You n hnge te, time, or lok type (2h or 24h) t ny time. For more informtion, see Setting the te n time in the Bsi User s Guie. (e.g. Enter 3 for 203.) 8
7 Wireless setup (if neee) When the Wi-Fi setup will strt. messge ppers on the LCD, re the messge, n then press OK to ontinue. For wireless setup using moile evie, go to. For Winows n Mintosh users, go to. If you wnt to onfigure ny of the options in steps 8-4, you n hoose No in step, n then go to step 8. You will e le to onfigure the wireless settings lter. Press or to hoose Yes. Go to step 6 on pge 20 to ontinue with the wireless setup. After finishing the wireless setup, return to step 8 to finish the mhine setup. Press or to hoose No. Go to step 8 n ontinue with the mhine setup. Wireless setup instrutions for Winows n Mintosh users will e overe lter, strting on pge 20. e 8 Choose your lnguge (if neee) Press Menu. Press or to hoose Initil Setup. Press or to hoose Lol Lnguge. Press or to hoose your lnguge. Press Stop/Exit. If prompt messge ppers on the LCD, re it n press OK to ontinue. 9
9 Choose the orret Reeive Moe The orret Reeive Moe is etermine y the externl evies n telephone susrier servies (Voie Mil, Distintive Ring, et.) you hve (or will e using) on the sme line s the Brother mhine. For more informtion, see Using Reeive Moes in hpter 5 of the Bsi User s Guie. If you re not using this mhine for fxing, go to the next step. Will you e using Distintive Ring numer for reeiving fxes? Brother uses the term Distintive Ring ut telephone ompnies my hve other nmes for this servie suh s Custom Ringing, RingMster, Personlize Ring, Teen Ring, Ient-A-Cll, n Smrt Ring. See Distintive Ring in hpter 6 of the Bsi User s Guie for instrution on setting up your mhine using this feture. Will you e using Voiemil on the sme telephone line s your Brother mhine? If you hve Voie Mil on the sme telephone line s your Brother mhine, there is strong possiility tht Voie Mil n the Brother mhine will onflit with eh other when reeiving inoming lls. See Voie Mil in hpter 6 of the Bsi User s Guie for instrutions on setting up your mhine using this servie. Will you e using Telephone Answering Devie on the sme telephone line s your Brother mhine? Your externl telephone nswering evie (TAD) will utomtilly nswer every ll. Voie messges re store on the externl TAD n fx messges re printe. Choose Externl TAD s your reeive moe. See the instrutions elow. For itionl etils, see Conneting n externl TAD (telephone nswering evie) in hpter 6 of the Bsi User s Guie. Will you e using your Brother mhine on eite fx line? Your mhine utomtilly nswers every ll s fx. Choose Fx Only s your reeive moe. See the instrutions elow. Will you e using your Brother mhine on the sme line s your telephone? Do you wnt to reeive voie lls n fxes utomtilly? The Fx/Tel reeive moe is use when shring the Brother mhine n your telephone on the sme line. Choose Fx/Tel s your reeive moe. See the instrutions elow. For itionl informtion see Fx/Tel in hpter 5 of the Bsi User s Guie for instrutions on setting up n using this reeive moe. Importnt Note: You nnot reeive voie messges on either Voie Mil or n nswering mhine when hoosing the Fx/Tel moe. Do you expet to reeive very few fxes? Choose Mnul s your reeive moe. You ontrol the phone line n must nswer every ll yourself. See the instrutions elow. e f Press Menu. Press or to hoose Fx. Press or to hoose Setup Reeive. Press or to hoose Reeive Moe. Press your preferre reeive moe. Press Stop/Exit. If the Reeive Moe option is not isplye, mke sure the Distintive Ring feture is set to Off. (See Turning off Distintive Ring in hpter 6 of the Bsi User s Guie.) 0
0 Set your Sttion ID Set your mhine s Sttion ID so tht the te n time pper on eh fx you sen. If you re not using this mhine for fxing, go to the next step. e Press Menu. Press or to hoose Initil Setup. Press or to hoose Sttion ID. Enter your fx numer (up to 20 igits) on the il p, n then press OK. Enter your nme (up to 20 hrters) using the il p, n then press OK. See the following hrt for entering your nme. If you nee to enter hrter tht is on the sme key s the hrter efore, press to move the ursor to the right. If you entere hrter inorretly n wnt to hnge it, press or to move the ursor to the inorret hrter, n then press Cler. For more informtion, see Entering Text in the Bsi User s Guie. (USA only) The Telephone Consumer Protetion At of 99 mkes it unlwful for ny person to use omputer or eletroni evie to sen ny messge vi telephone fx mhine unless suh messges lerly ontin, in mrgin t the top or ottom of eh trnsmitte pge, or on the first pge of the trnsmission, the te n time it is sent n n ientifition of the usiness or other entity or other iniviul sening the messge n the telephone numer of the sening mhines or suh usiness, other entity or iniviul. Trnsmission Verifition Report Your Brother mhine is equippe with Trnsmission Verifition Report tht n e use s onfirmtion tht you sent fx. This report lists the nme or fx numer of the reeiving prty, the te, time, n urtion of the trnsmission, the numer of pges trnsmitte, n whether or not the trnsmission ws suessful. If you wnt to use the Fx Trnsmission Report feture, see Trnsmission Verifition Report in hpter 4 of the Bsi User s Guie. f Press key One time Two times Press Stop/Exit. Three times Four times Five times 2 A B C 2 A 3 D E F 3 D 4 G H I 4 G 5 J K L 5 J 6 M N O 6 M 7 P Q R S 7 8 T U V 8 T 9 W X Y Z 9 If you mke mistke n wnt to strt gin, press Stop/Exit n go k to.
2 Set Tone or Pulse iling moe (Cn only) 4 Automti Dylight Sving Time Your mhine omes set for Tone iling servie. If you hve Pulse iling (rotry) servie, you nee to hnge the iling moe. e 3 Press Menu. Press or to hoose Initil Setup. Press or to hoose Tone/Pulse. Press or to hoose Pulse (or Tone). Press Stop/Exit. Set the telephone line omptiility (VoIP) You n set the mhine to hnge utomtilly for Dylight Sving Time. It will reset itself forwr one hour in the spring n kwr one hour in the fll. e f Press Menu. Press or to hoose Initil Setup. Press or to hoose Dte & Time. Press or to hoose Auto Dylight. Press or to hoose On (or Off). Press Stop/Exit. If you re onneting the mhine to VoIP servie (over the Internet), you nee to hnge the omptiility setting. If you re using n nlog telephone line, you n skip this step. e Press Menu. Press or to hoose Initil Setup. Press or to hoose Comptiility. Press or to hoose Bsi(for VoIP). Press Stop/Exit. 2
5 Choose your onnetion type These instlltion instrutions re for Winows XP Home, XP Professionl, XP Professionl x64 Eition, Winows Vist, Winows 7, Winows 8, n M OS X v0.6.8, 0.7.x, 0.8.x. For Winows Server 2003/2008/2008 R2/202, the rivers n e foun on your moel s ownlo pge t http://solutions.rother.om/. If your omputer oes not hve CD-ROM rive, you n ownlo the ltest rivers, mnuls n utilities for your moel from the Brother Solutions Center t http://solutions.rother.om/. Some softwre pplitions inlue on the CD-ROM my not e ville s ownlo. For USB interfe le Winows, go to pge 4 Mintosh, go to pge 7 USB Winows Mintosh For Wireless Network Winows n Mintosh, go to pge 20 Wireless Network 3
USB Winows For Winows USB interfe users (Winows XP Home/XP Professionl/Winows Vist /Winows 7/Winows 8) 6 Before you instll Clik Instll MFL-Pro Suite n lik Yes if you ept the liense greements. Mke sure tht your omputer is ON n you re logge on with Aministrtor rights. DO NOT onnet the USB le yet. If there re ny progrms running, lose them. The sreens my iffer epening on your operting system. The CD-ROM inlues Nune PperPort 2SE. This softwre supports Winows XP Home (SP3 or greter), XP Professionl (SP3 or greter), XP Professionl x64 Eition (SP2 or greter), Winows Vist (SP2 or greter), Winows 7 n Winows 8. Upte to the ltest Winows Servie Pk efore instlling MFL-Pro Suite. If the Winows Seurity sreen ppers, lik the hek ox n lik Instll to omplete the instlltion orretly. Choose Lol Connetion (USB), n then lik Next. Follow the on-sreen instrutions until the Plug in the USB le sreen ppers. 7 Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM rive. If the moel nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen oes not pper utomtilly, go to Computer (My Computer). (For Winows 8: lik the (File Explorer) ion on the tskr, n then go to Computer.) Doule-lik the CD-ROM ion, n then oule-lik strt.exe. If the User Aount Control sreen ppers, lik Allow or Yes. 4
8 USB Connet the USB le Lift the snner over until it loks seurely into the open position. Winows Lift the snner over to relese the lok. Gently push the snner over support own n lose the snner over using oth hns. 3 2 Connet the USB le to the USB port mrke with symol. You will fin the USB port insie the mhine, s shown in the llout elow. CAUTION Be reful not to pinh your fingers when the snner over loses. e The instlltion will ontinue utomtilly. The instlltion sreens pper one fter nother. Crefully guie the USB le into the le hnnel n out the k of the mhine. Connet the le to your omputer. DO NOT nel ny of the sreens uring the instlltion. It my tke few seons for ll sreens to pper. f g h i If the Environmentl Avie for Imging Equipment sreen ppers, lik Next. When the On-Line Registrtion sreen ppers, follow the on-sreen instrutions. Clik Next. If you o not wnt to set your mhine s the efult printer, ler the Set s Defult Printer hek ox, n then lik Next. When the Setup is Complete winow ppers, onfirm the settings, n then lik Next. USB Winows Mintosh IMPORTANT Mke sure tht the le oes not restrit the over from losing, or n error my our. 5
9 USB Finish n restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Aministrtor rights. Winows The following sreens will pper. When the Softwre Upte Setting sreen ppers, hoose the softwre upte setting you wnt n lik OK. When the Brother Prout Reserh n Support Progrm sreen ppers, selet your preferene n follow the on-sreen instrutions. If n error messge ppers uring the softwre instlltion, o one of the following: - Winows XP, Winows Vist n Winows 7 users: Run the Instlltion Dignostis lote in (Strt) > All Progrms > Brother > MFC-XXXX (where XXXX is your moel nme). - Winows 8 users: To run the Instlltion Dignostis, oule-lik (Brother Utilities) on the esktop, n then lik the rop-own list n selet your moel nme (if not lrey selete). Clik Tools in the left nvigtion r. Depening on your seurity settings, Winows Seurity or ntivirus softwre winow my pper when using the mhine or its softwre. Plese llow or permit the winow to ontinue. Internet ess is require for the softwre upte n the Brother Prout Reserh n Support Progrm. When you instll MFL-Pro Suite, Brother Help will lso e instlle utomtilly. Brother Help llows you to ess the Brother Solutions Center when you lik in the tsk try. Finish To instll optionl pplitions: Now go to Pge 33 The instlltion is now omplete. Winows 8 users: If the Brother mnuls inlue on the CD-ROM re in PDF formt, use Aoe Reer to open them. If Aoe Reer is instlle on your omputer ut you nnot open the files in Aoe Reer, hnge the file ssoition for PDF (see How to open PDF file in Aoe Reer (Winows 8) on pge 35). 6
USB Mintosh For Mintosh USB interfe users (M OS X v0.6.8, 0.7.x, 0.8.x) 6 Before you instll Connet the USB le to the USB port mrke with symol. You will fin the USB port insie the mhine, s shown in the llout elow. Mke sure your mhine is onnete to the power n your Mintosh is ON. You must e logge on with Aministrtor rights. For M OS X v0.6.0 to 0.6.7 users, upgre to M OS X v0.6.8-0.8.x. 7 Connet the USB le DO NOT onnet the mhine to USB port on keyor or non-powere USB hu. Connet the mhine iretly to your Mintosh. Lift the snner over until it loks seurely into the open position. Crefully guie the USB le into the le hnnel n out the k of the mhine. Connet the le to your Mintosh. IMPORTANT Mke sure tht the le oes not restrit the over from losing, or n error my our. USB Winows Mintosh 7
USB Lift the snner over to relese the lok. Gently push the snner over support own n lose the snner over using oth hns. e Mintosh Choose your mhine from the list, n then lik Next. 3 CAUTION 2 Be reful not to pinh your fingers when the snner over loses. f g When the A Printer sreen ppers, lik A Printer. Choose your mhine from the list. Clik A n then lik Next. 8 Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM rive. Doule-lik the Strt Here OSX ion to instll. If the moel nme sreen ppers, hoose your mhine. (OS X v0.8.x) Selet Brother MFC-XXXX CUPS (where XXXX is your moel nme) river from the Use pop-up menu. Choose Lol Connetion (USB), n then lik Next. Follow the on-sreen instrutions. h When the support sreen ppers, follow the on-sreen instrutions if you wnt to ownlo Presto! PgeMnger. You n lso ownlo Presto! PgeMnger lter from the Brother Support sreen. Clik Next. When this sreen ppers, lik Close. After the instlltion, the Brother softwre will serh for the Brother evie. This will tke few moments to omplete. The instlltion of MFL-Pro Suite is now omplete. Go to step 9. 8
USB Mintosh 9 Downlo n instll Presto! PgeMnger When Presto! PgeMnger is instlle, OCR pility is e to Brother ControlCenter2. You n esily sn, shre n orgnize photos n ouments using Presto! PgeMnger. On the Brother Support sreen, lik the Presto! PgeMnger ion to go to the Presto! PgeMnger ownlo site, n follow the on-sreen instrutions. Finish The instlltion is now omplete. Winows Mintosh USB 9
For Wireless Network Users For wireless network interfe users 6 Before you egin First you must onfigure the wireless network settings of your mhine to ommunite with your ess point/router. After the mhine is onfigure to ommunite with your ess point/router, omputers on your network will hve ess to the mhine. To use the mhine from these omputers, you will nee to instll the rivers n softwre. The following steps will guie you through the onfigurtion n instlltion proess. To hieve optimum results with norml everyy oument printing, ple the Brother mhine s lose to the network ess point/router s possile with miniml ostrutions. Lrge ojets n wlls etween the two evies s well s interferene from other eletroni evies n ffet the t trnsfer spee of your ouments. Due to these ftors, wireless my not e the est metho of onnetion for ll types of ouments n pplitions. If you re printing lrge files, suh s multi-pge ouments with mixe text n lrge grphis, you my wnt to onsier hoosing USB for the fstest throughput spee. If you hve previously onfigure the wireless settings of the mhine, you must reset the network settings efore you n onfigure the wireless settings gin. On your mhine, press Menu. Press or to hoose Network. Press or to hoose Network Reset. Press (Yes) twie to ept the hnge. The following instrutions re for infrstruture moe (onnete to omputer through n ess point/router). Infrstruture Moe 5 4 2 3 Aess point/router Wireless network mhine (your mhine) onnete to the ess point/router Wireless-ple omputer onnete to the ess point/router Wire omputer onnete to the ess point/router e Moile evie onnete to the ess point/router Plese mke sure the wireless network settings of the mhine mth the ess point/router. To set up your mhine in A-ho moe, see Connete to Wireless Computer without Wireless LAN Aess Point Router in the Network (A-Ho Moe) in the Softwre n Network User s Guie on the CD-ROM. To view the Softwre n Network User s Guie: Turn on your omputer. Insert the CD-ROM into your CD-ROM rive. For Winows : 2 Choose your moel n the lnguge. The CD-ROM top menu will pper. 3 Clik User s Guies, n then lik PDF/HTML ouments. 4 Clik Softwre n Network User s Guie. For Mintosh: 2 Doule-lik User s Guies. Choose your moel n the lnguge. 3 Clik User s Guies, n then lik Softwre n Network User s Guie. 20
For Wireless Network Users 7 Choose your wireless setup metho The following instrutions will offer three methos for setting up your Brother mhine on wireless network. If you egn the wireless setup from step 7 on pge 9, go to metho or. For ll other users, hoose the metho you prefer for your environment. Metho is the reommene wy to onnet (Winows or Mintosh). Setup using the CD-ROM (Winows n Mintosh) It is reommene tht you use omputer wirelessly onnete to your network for this metho. A USB le might e neee in some ses. Now go to pge 23 Mnul setup from the ontrol pnel using the Setup Wizr (Winows, Mintosh n moile evies) If your wireless ess point/router oes not support WPS (Wi-Fi Protete Setup ) or AOSS, write own the wireless network settings of your wireless ess point/router in the re elow. If you nee ssistne uring setup n wnt to ontt Brother Customer Servie, mke sure you hve your SSID (Network Nme) n Network Key rey. We nnot ssist you in loting this informtion. Item Reor the urrent wireless network settings SSID (Network Nme) Network Key* * The Network Key my lso e esrie s the Psswor, Seurity Key, or Enryption Key. If you o not know this informtion (SSID n Network Key), you nnot ontinue the wireless setup. How n I fin this informtion? ) Chek the oumenttion provie with your wireless ess point/router. 2) The initil SSID oul e the mnufturer s nme or the moel nme. 3) If you o not know the seurity informtion, plese onsult the router mnufturer, your system ministrtor, or your Internet provier. Now go to pge 24 Wireless Network 2
For Wireless Network Users One-push setup using WPS or AOSS (Winows, Mintosh n moile evies) Use this metho if your wireless ess point/router supports utomti wireless (one-push) setup (WPS or AOSS ). Now go to pge 25 22
For Wireless Network Users 8 Setup using the CD-ROM (Winows n Mintosh) For Mintosh Users: Put the CD-ROM into your CD-ROM rive n oule-lik Strt Here OSX. Selet Wireless instlltion n follow the Wireless Devie Setup instrutions on your omputer sreen. When setup is omplete, go to step 20-e on pge 3. When the Firewll/AntiVirus etete sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion n ontinue with the instlltion. (Reommene), n then lik Next. For Winows Users: Put the CD-ROM into your CD-ROM rive. If the moel nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen oes not pper utomtilly, go to Computer (My Computer). (For Winows 8: lik the (File Explorer) ion on the tskr, n then go to Computer.) Doule-lik the CD-ROM ion, n then oule-lik strt.exe. If the User Aount Control sreen ppers, lik Allow or Yes. Clik Instll MFL-Pro Suite n lik Yes if you ept the liense greements. e f If you re not using the Winows Firewll, see the instrutions provie with your firewll softwre for informtion on how to the following network ports. For network snning, UDP port 54925. For network PC-Fx reeiving, UDP port 54926. If you still hve troule with your network onnetion, UDP ports 37 n 6. Follow the on-sreen instrutions to set up the Brother mhine. Your mhine will now try to onnet to your wireless network. It my tke few minutes. Wireless setup is now omplete. To instll MFL-Pro Suite For Winows users: Now go to Step 20-e on pge 29 Choose Wireless Network Connetion, n then lik Next. Wireless Network 23
For Wireless Network Users 8 Mnul setup from the ontrol pnel using the Setup Wizr (Winows, Mintosh n moile evies) You must hve the wireless settings you wrote own for your network in step 7- on pge 2 efore you proee. If you egn the wireless setup from step 7 on pge 9, press or to hoose Setup Wizr n press OK. Then go to. All other users go to. e f Press (Yes) to onnet your mhine using WPS. (If you hoose 2 (No) to ontinue mnul onfigurtion, go to f to enter Network Key.) When the LCD shows Strt WPS, press the WPS utton on your wireless ess point/router, n then press (Next) to proee. Go to g. Enter the Network Key you wrote own in step 7- on pge 2 using the il p to hoose eh letter or numer. The letters pper in this orer: lower se, upper se n then numers. To move the ursor left or right, press or. (For more informtion, see Entering Text for Wireless Settings on pge 34.) On your mhine, press Menu. Press or to hoose Network. Press or to hoose WLAN. Press or to hoose Setup Wizr. Press OK. When Enle WLAN? is isplye, press OK to ept. This will strt the wireless setup wizr. To nel, press Stop/Exit. The mhine will serh for ville SSIDs. It will tke severl seons to isply list of ville SSIDs. If list of SSIDs is isplye, press or to hoose the SSID you wrote own in step 7- on pge 2. If the wireless ess point/router of the selete SSID supports WPS, n the mhine sks to use WPS, go to e. If the mhine sks you to enter Network Key, go to f. Otherwise, go to g. g Press OK when you hve entere ll the hrters, then press (Yes) to pply your settings. Your mhine will now try to onnet to your wireless network. It my tke few minutes. Wireless setup is now omplete. For moile evie users: Connet your moile evie to wireless ess point/router using Wi-Fi onnetion. Downlo n instll Brother iprint&sn (Anroi /ios/winows Phone) from your moile evie s pplition ownlo site. You n lso use AirPrint (ios) with this mhine. To ownlo the User s Guie for the pplition you re using (Brother iprint&sn/airprint), visit the Brother Solutions Center t http://solutions.rother.om/ n lik Mnuls on your moel s pge. If you egn the setup from step 7 on pge 9, go k to step 8 to ontinue the mhine settings. 24 If the list is lnk, hek tht the wireless ess point/router hs power n is rosting the SSID. Move your mhine loser to the wireless ess point/router n try strting from gin. If your ess point is set to not rost the SSID, you will hve to mnully the SSID nme. For more informtion, see Configure Your Wireless Network When the SSID Is Not Brost in the Softwre n Network User s Guie. To instll MFL-Pro Suite, ontinue to step 9. For Winows users: Now go to Pge 28 For Mintosh users: Now go to Pge 3
For Wireless Network Users 8 One-push setup using WPS or AOSS (Winows, Mintosh n moile evies) Confirm your wireless ess point/router hs the WPS or AOSS symol s shown elow. Ple the Brother mhine within rnge of your WPS or AOSS ess point/router. The rnge my iffer epening on your environment. Refer to the instrutions provie with your ess point/router. If you egn the onfigurtion from step 7 on pge 9, go to. All other users go to. On your mhine, press Menu. Press or to hoose Network. Press or to hoose WLAN. Press or to hoose WPS/AOSS n press OK. When Enle WLAN? is isplye, press OK to ept. This will strt the wireless setup wizr. For moile evie users: Connet your moile evie to wireless ess point/router using Wi-Fi onnetion. Downlo n instll Brother iprint&sn (Anroi /ios/winows Phone) from your moile evie s pplition ownlo site. You n lso use AirPrint (ios) with this mhine. To ownlo the User s Guie for the pplition you re using (Brother iprint&sn/airprint), visit the Brother Solutions Center t http://solutions.rother.om/ n lik Mnuls on your moel s pge. If you egn the setup from step 7 on pge 9, go k to step 8 to ontinue the mhine settings. To instll MFL-Pro Suite, ontinue to step 9. For Winows users: Now go to Pge 28 For Mintosh users: If your wireless ess point/router supports WPS n you wnt to onfigure your mhine using the PIN (Personl Ientifition Numer) Metho, see Configure Your Wireless Network Using the PIN Metho of Wi-Fi Protete Setup (WPS) in the Softwre n Network User s Guie. e When the LCD instruts you to strt WPS or AOSS, press the WPS or AOSS utton on your wireless ess point/router (for more informtion, see the instrutions provie with your wireless ess point/router), n then press OK on your mhine. Now go to Pge 3 This feture will utomtilly etet whih moe (WPS or AOSS ) your wireless ess point/router uses to onfigure your mhine. Wireless setup is now omplete. Wireless Network 25
For Wireless Network Users Trouleshooting If you nee ssistne uring setup n wnt to ontt Brother Customer Servie, mke sure you hve your SSID (Network Nme) n Network Key rey. We nnot ssist you in loting this informtion. How n I fin the wireless seurity informtion (SSID n Network Key*) ) Chek the oumenttion provie with your wireless ess point/router. 2) The initil SSID oul e the mnufturer s nme or the moel nme. 3) If you o not know the seurity informtion, plese onsult the router mnufturer, your system ministrtor, or your Internet provier. * The Network Key my lso e esrie s the Psswor, Seurity Key or Enryption Key. Wireless LAN report If the wireless LAN report tht printe shows tht the onnetion file, hek the error oe on the printe report n refer to the following instrutions. Error oe Reommene Solutions The wireless setting is not tivte, turn the wireless setting to ON. TS-0 - If network le is onnete to your mhine, isonnet it n turn the wireless setting of your mhine to ON. On your mhine, press Menu. Press or to hoose Network. Press or to hoose WLAN Enle. Press or to hoose On. Press Stop/Exit. The wireless ess point/router nnot e etete.. Chek the following 4 points. TS-02 - Mke sure tht the wireless ess point/router is powere on. - Move your mhine to n ostrution-free re, or loser to the wireless ess point/router. - Temporrily ple your mhine within out 3.3 feet (one meter) from the wireless ess point when you re onfiguring the wireless settings. - If your wireless ess point/router is using MAC ress filtering, onfirm the MAC ress of the Brother mhine is llowe in the filter. 2. If you mnully entere the SSID n seurity informtion (SSID/uthentition metho/enryption metho/network Key), the informtion my e inorret. Reonfirm the SSID n seurity informtion n re-enter the orret informtion s neessry. See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 26 to onfirm. 26
For Wireless Network Users The Authentition/Enryption methos use y the selete wireless ess point/router re not supporte y your mhine. For infrstruture moe, hnge the uthentition n enryption methos of the wireless ess point/router. Your mhine supports the following uthentition methos: TS-04 Authentition metho Enryption metho WPA-Personl TKIP AES WPA2-Personl AES Open WEP None (without enryption) Shre key WEP If your prolem is not solve, the SSID or network settings you entere my e inorret. Reonfirm the wireless network settings. See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 26 to onfirm. For -ho moe, hnge the uthentition n enryption methos of your omputer for the wireless setting. Your mhine supports Open uthentition metho only, with optionl WEP enryption. The seurity informtion (SSID/Network Key) is inorret. TS-05 Reonfirm the SSID n seurity informtion (Network Key). If your router uses WEP enryption, enter the key use s the first WEP key. Your Brother mhine supports the use of the first WEP key only. See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 26 to onfirm. The wireless seurity informtion (Authentition metho/enryption metho/network Key) is inorret. TS-06 Reonfirm the wireless seurity informtion (Authentition metho/enryption metho/ Network Key) in the tle of TS-04. If your router uses WEP enryption, enter the key use s the first WEP key. Your Brother mhine supports the use of the first WEP key only. See How n I fin the wireless seurity informtion (SSID n Network Key*) on pge 26 to onfirm. The mhine nnot etet wireless ess point/router tht hs WPS or AOSS enle. TS-07 TS-08 If you woul like to onfigure your wireless settings using WPS or AOSS, you must operte oth your mhine n the wireless ess point/router. Confirm your wireless ess point/router supports WPS or AOSS n try strting gin. If you o not know how to operte your wireless ess point/router using WPS or AOSS see the oumenttion provie with your wireless ess point/router, sk the mnufturer of your wireless ess point/router or sk your network ministrtor. Two or more wireless ess points tht hve WPS or AOSS enle re etete. - Confirm tht only one wireless ess point/router within rnge hs the WPS or AOSS metho tive n try gin. - Try strting gin fter few minutes in orer to voi interferene from other ess points. Wireless Network 27
Wireless Network Winows Instll the rivers n softwre (Winows XP Home/XP Professionl/Winows Vist /Winows 7/Winows 8) 9 Before you instll Clik Instll MFL-Pro Suite n lik Yes if you ept the liense greements. Mke sure tht your omputer is ON n you re logge on with Aministrtor rights. If there re ny progrms running, lose them. The sreens my iffer epening on your operting system. The CD-ROM inlues Nune PperPort 2SE. This softwre supports Winows XP Home (SP3 or greter), XP Professionl (SP3 or greter), XP Professionl x64 Eition (SP2 or greter), Winows Vist (SP2 or greter), Winows 7 n Winows 8. Upte to the ltest Winows Servie Pk efore instlling MFL-Pro Suite. Choose Wireless Network Connetion, n then lik Next. 20 Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM rive. If the moel nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen oes not pper utomtilly, go to Computer (My Computer). (For Winows 8: lik the (File Explorer) ion on the tskr, n then go to Computer.) Doule-lik the CD-ROM ion, n then oule-lik strt.exe. If the User Aount Control sreen ppers, lik Allow or Yes. When the Firewll/AntiVirus etete sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion n ontinue with the instlltion. (Reommene), n then lik Next. If you re not using the Winows Firewll, see the instrutions provie with your firewll softwre for informtion on how to the following network ports. For network snning, UDP port 54925. For network PC-Fx reeiving, UDP port 54926. If you still hve troule with your network onnetion, UDP ports 37 n 6. 28
Wireless Network Winows e Choose your mhine from the list, n then lik Next. 2 Finish n restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Aministrtor rights. If your mhine is not foun over the network, onfirm your settings y following the on-sreen instrutions. If you enounter this filure, go to step 7- on pge 2 n setup the wireless onnetion gin. If you re using WEP n the LCD isplys Connete ut your mhine is not foun on the network, mke sure you entere the WEP key orretly. The WEP key is se-sensitive. f g h i j The instlltion of the Brother rivers will utomtilly strt. The instlltion sreens pper one fter nother. DO NOT nel ny of the sreens uring the instlltion. It my tke few seons for ll sreens to pper. If the Winows Seurity sreen ppers, lik the hek ox n lik Instll to omplete the instlltion orretly. If the Environmentl Avie for Imging Equipment sreen ppers, lik Next. When the On-Line Registrtion sreen ppers, follow the on-sreen instrutions. Clik Next. If you o not wnt to set your mhine s the efult printer, ler the Set s Defult Printer hek ox, n then lik Next. When the Setup is Complete winow ppers, onfirm the settings, n then lik Next. If n error messge ppers uring the softwre instlltion, o one of the following: - Winows XP, Winows Vist n Winows 7 users: Run the Instlltion Dignostis lote in (Strt) > All Progrms > Brother > MFC-XXXX LAN (where XXXX is your moel nme). - Winows 8 users: To run the Instlltion Dignostis, oule-lik (Brother Utilities) on the esktop, n then lik the rop-own list n selet your moel nme (if not lrey selete). Clik Tools in the left nvigtion r. Depening on your seurity settings, Winows Seurity or ntivirus softwre winow my pper when using the mhine or its softwre. Plese llow or permit the winow to ontinue. Wireless Network Winows Mintosh 29
Wireless Network Winows The following sreens will pper. When the Softwre Upte Setting sreen ppers, hoose the softwre upte setting you wnt n lik OK. When the Brother Prout Reserh n Support Progrm sreen ppers, selet your preferene n follow the on-sreen instrutions. Internet ess is require for the softwre upte n the Brother Prout Reserh n Support Progrm. When you instll MFL-Pro Suite, Brother Help will lso e instlle utomtilly. Brother Help llows you to ess the Brother Solutions Center when you lik in the tsk try. To instll optionl pplitions: Now go to Pge 33 Winows 8 users: If the Brother mnuls inlue on the CD-ROM re in PDF formt, use Aoe Reer to open them. If Aoe Reer is instlle on your omputer ut you nnot open the files in Aoe Reer, hnge the file ssoition for PDF (see How to open PDF file in Aoe Reer (Winows 8) on pge 35). 22 Instll MFL-Pro Suite on itionl omputers (if neee) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 9 on pge 28. Network liense (Winows ) This prout inlues PC liense for up to two users. This liense supports the instlltion of the MFL-Pro Suite inluing Nune PperPort 2SE on up to two PCs on the network. If you wnt to use more thn two PCs with Nune PperPort 2SE instlle, plese purhse the Brother NL-5 pk whih is multiple PC liense greement pk for up to five itionl users. To purhse the NL-5 pk, ontt your uthorize Brother eler or ontt Brother ustomer servie. Finish The instlltion is now omplete. 30
Wireless Network Mintosh Instll the rivers n softwre (M OS X v0.6.8, 0.7.x, 0.8.x) 9 Before you instll e Choose your mhine from the list, n then lik Next. Mke sure your mhine is onnete to the power n your Mintosh is ON. You must e logge on with Aministrtor rights. For M OS X v0.6.0 to 0.6.7 users, upgre to M OS X v0.6.8-0.8.x. 20 Instll MFL-Pro Suite If your wireless settings fil, the Wireless Devie Setup Wizr sreen ppers. Follow the on-sreen instrutions to omplete the wireless onfigurtion. Put the CD-ROM into your CD-ROM rive. Doule-lik the Strt Here OSX ion to instll. If the moel nme sreen ppers, hoose your mhine. f The instlltion of the Brother rivers will utomtilly strt. Plese wit for the softwre to instll. Choose Wireless Network Connetion, n then lik Next. You n fin your mhine s MAC Aress (Ethernet Aress) n IP Aress y printing out the Network Configurtion Report. See How to Print the Network Configurtion Report in the Softwre n Network User s Guie. If the Setup Network Sn to nme sreen ppers, follow the instrutions elow. After the instlltion, the Brother softwre will serh for the Brother evie. This will tke few moments to omplete. ) Enter nme for your Mintosh (up to 5 hrters long). 2) Clik Next. Go to g. The nme you enter will pper on the mhine s LCD when you press SCAN n hoose sn option. For more informtion, see Configure Network Snning for Mintosh in the Softwre n Network User s Guie. 3 Wireless Network Winows Mintosh
Wireless Network Mintosh g h When the A Printer sreen ppers, lik A Printer. Choose your mhine from the list, lik A, n then lik Next. 2 Downlo n instll Presto! PgeMnger When Presto! PgeMnger is instlle, OCR pility is e to Brother ControlCenter2. You n esily sn, shre n orgnize photos n ouments using Presto! PgeMnger. On the Brother Support sreen, lik the Presto! PgeMnger ion to go to the Presto! PgeMnger ownlo site, n follow the on-sreen instrutions. (OS X v0.8.x) Selet Brother MFC-XXXX CUPS (where XXXX is your moel nme) river from the Use pop-up menu. i When the support sreen ppers, follow the on-sreen instrutions if you wnt to ownlo Presto! PgeMnger. You n lso ownlo Presto! PgeMnger lter from the Brother Support sreen. Clik Next. When this sreen ppers, lik Close. 22 Instll MFL-Pro Suite on itionl omputers (if neee) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 9 on pge 3. Finish The instlltion is now omplete. The instlltion of MFL-Pro Suite is now omplete. Go to step 2. 32
Instll Optionl Applitions Winows Instll optionl pplitions Clik the utton for the pplition you wnt to instll. BookSn&Whiteor Suite supporte y Rellusion, In The BookSn Enhner softwre n orret your snne ook imges utomtilly. The Whiteor Enhner softwre lens up n enhnes text n imges from photos tken of your whiteor. Homepge Print 2* supporte y CORPUS Homepge Print 2 is n pplition tht helps you pture n eit we pges so tht you n print out only the informtion you nee. * This pplition supports Mirosoft Internet Explorer 7.0/8.0 n Firefox 3. The mhine must e ON n onnete to the omputer. Some pplitions require Internet ess. Mke sure you re logge on with Aministrtor rights. This pplition is not ville for Winows Server 2003/2008/202 series. Open the top menu gin y ejeting n then reinserting the CD-ROM or y oule-liking the strt.exe progrm from the root foler. If the lnguge sreen ppers, hoose your lnguge. The CD-ROM Top Menu will pper. Clik Aitionl Applitions. When instlltion is omplete, lik the utton for the next pplition you wnt to instll. To exit, lik Exit. To strt BookSn&Whiteor Suite, oule-lik the shortut ion on your esktop. To strt Homepge Print 2, lik (Strt) > All Progrms > Homepge Print 2 > Homepge Print 2. 33
For Network Users Reset the network settings to ftory efult To restore ll network settings of the internl Print/Sn server to the ftory efult, plese follow the steps elow: e f g Mke sure the mhine is ile, then isonnet ll the les from the mhine (exept the power or). Press Menu. Press or to hoose Network. Press or to hoose Network Reset. Press to hoose Yes. Press to hoose Yes. The mhine will restrt, re-onnet the les one this is omplete. Entering Text for Wireless Settings Most numer keys hve three or four letters printe on them. The keys for 0, # n l o not hve printe letters euse they re use for speil hrters. By pressing the orret numer key repetely, you n ess the hrter you wnt. For onfiguring wireless network settings Press Key One time Two times Three times Inserting spes To enter spe in nme, press twie. Four times Five times Six times Seven times Mking orretions If you entere hrter inorretly n wnt to hnge it, press or to move the ursor to the inorret hrter, n then press Cler. Enter the orret hrter. You n lso k up n insert hrter. Repeting hrters If you nee to enter hrter tht is on the sme key s the hrter efore, press to move the ursor to the right efore you press the key gin. Speil hrters n symols Press l, # or 0 repetely until you see the speil hrter or symol you wnt. Eight times 2 A B C 2 3 e f D E F 3 e 4 g h i G H I 4 g h 5 j k l J K L 5 j k 6 m n o M N O 6 m n 7 p q r s P Q R S 7 8 t u v T U V 8 t u 9 w x y z W X Y Z 9 Press l for (spe)! # $ % & ( ) +, -. / Press # for : ; < = >? @ [ ] ^ _ Press 0 for 0 \ { } Nine times 34
Other Informtion How to open PDF file in Aoe Reer (Winows 8) Move your mouse to the lower right orner of your esktop. When the menu r ppers, lik Settings, n then lik Control Pnel. Clik Progrms, lik Defult Progrms, n then lik Assoite file type or protool with progrm. Selet.pf, n then lik the Chnge progrm... utton. Clik Aoe Reer. The ion next to.pf hnges to the Aoe Reer ion. Aoe Reer is now the efult pplition for reing.pf files until you hnge this file ssoition. Brother CretiveCenter Get inspire. If you re using Winows, oule-lik the Brother CretiveCenter ion on your esktop to ess our FREE wesite with mny ies n resoures for personl n professionl use. M users n ess Brother CretiveCenter t http://www.rother.om/retiveenter/ 35
Consumles Replement onsumles When the time omes to reple ink rtriges, messge will e inite on the LCD. For more informtion out the ink rtriges for your mhine, visit http://www.rother.om/originl/ or ontt your lol Brother re-seller. Ink rtrige Mgent Cyn Yellow Blk LC0M (Stnr) LC03M (High Yiel) LC0C (Stnr) LC03C (High Yiel) LC0Y (Stnr) LC03Y (High Yiel) LC0BK (Stnr) LC03BK (High Yiel) Wht is Innoell? Innoell is rnge of genuine onsumles offere y Brother. The nme Innoell erives from the wors Innovtion n Bell (mening Beutiful in Itlin) n is representtion of the innovtive tehnology proviing you with eutiful n long lsting print results. Tremrks The Brother logo is registere tremrk of Brother Inustries, Lt. Brother is tremrk of Brother Inustries, Lt. Mirosoft, Winows, Winows Vist, Winows Server n Internet Explorer re either registere tremrks or tremrks of Mirosoft Corportion in the Unite Sttes n/or other ountries. Apple, Mintosh, M OS n OS X re tremrks of Apple In., registere in the Unite Sttes n other ountries. AirPrint is tremrk of Apple In. Aoe n Reer re either registere tremrks or tremrks of Aoe Systems Inorporte in the Unite Sttes n/or other ountries. Nune, the Nune logo, PperPort n SnSoft re tremrks or registere tremrks of Nune Communitions, In. or its ffilites in the Unite Sttes n/or other ountries. AOSS is tremrk of Bufflo In. Wi-Fi n Wi-Fi Protete Aess re registere tremrks of the Wi-Fi Alline. WPA, WPA2, Wi-Fi Protete Setup n Wi-Fi Protete Setup logo re tremrks of the Wi-Fi Alline. Anroi is tremrk of Google In. Use of this tremrk is sujet to Google Permissions. Firefox is registere tremrk of the Mozill Fountion. Eh ompny whose softwre title is mentione in this mnul hs Softwre Liense Agreement speifi to its proprietry progrms. Any tre nmes n prout nmes of ompnies ppering on Brother prouts, relte ouments n ny other mterils re ll tremrks or registere tremrks of those respetive ompnies. Compiltion n Pulition Uner the supervision of Brother Inustries, Lt., this mnul hs een ompile n pulishe, overing the ltest prout esriptions n speifitions. The ontents of this mnul n the speifitions of this prout re sujet to hnge without notie. Brother reserves the right to mke hnges without notie in the speifitions n mterils ontine herein n shll not e responsile for ny mges (inluing onsequentil) use y reline on the mterils presente, inluing ut not limite to typogrphil n other errors relting to the pulition. Copyright n Liense 203 Brother Inustries, Lt. All rights reserve. This prout inlues softwre evelope y the following venors: 983-998 PACIFIC SOFTWORKS, INC. ALL RIGHTS RESERVED. 2008 Deviespe Softwre, In. All rights reserve. This prout inlues the KASAGO TCP/IP softwre evelope y ZUKEN ELMIC,In. www.rothererth.om