BEKAERT Armanet THE CONSTRUCTIVE IDEA Armanet Render & plaster reinforcing mesh
Armanet Renovation Product specification Insulation Reinforcing Mesh Armanet is a heavily galvanized welded mesh used for interior and exterior plastering and rendering. Armanet is used as reinforcing mesh for plastering in the renovation of cracked walls. It is also used as a plaster support for insulation systems. Rolls 25m H mm 0.0 mm 330 mm 500 mm 1000 mm 510 mm 1.05 mm 1020 mm Panels Panel R H cm 20 panels per bundle Applications 25m H 19 mm H mm 1.05 mm 400 mm 500 mm 1020 mm 102 cm 1,05 mm 19 mm Coating Armanet is made from heavily galvanized wire with a Zn-coating of min. 350 g/m 2. Stainless steel upon request. Resistance to corrosion Effect of acidity (ph) on the rate of corrosion of zinc. average decrease in the zinc coating (in mm/year) 0,4 0,3 0,2 0,1 0 2 4 a b c stable coating rapid decrease in acid environment 6 10 12 14 1 ph rapid decrease in alkaline environment Tensile strength Tensile strength of the steel wires: 0.0 mm = 190 N 1.05 mm = 350 N Renovation of walls. Armanet for external insulation systems. Armanet for the repair of cracked areas.
Fixing Type AB Type AD Without thermal insulation To achieve good bonding, the mesh must be positioned a few mm in front of the wall to be repaired. Installation With thermal insulation 1 ;; @@ ;; @@ ;; @@ ;; @@ Position Widra angle beads at all corners. 2 Plastering 10 cm Always attach Armanet panels using fasteners per m 2. Overlaps 3 10 cm 4 20 cm 5 By machine Armanet By hand The overlaps must be carefully secured to each other every 20 cm using ring-clips or binding wire. This prevents movement. HR 14 clips Ring-clips Armanet panels are the ideal solution for preventing cracks around windows and doors.
Armanet Dista ;; @@ ;; @@ ;; @@ Wire diameter: 1.05 mm Product specification Mesh : 16 x 16 mm Zinc: min. 350 gr/m 2 Profile depth: max. 10 mm Profile distance: 100 x 100 mm Installation 20 panels/bundle 400 panels/pallet 20 panels/bundle 00 panels/pallet Armanet Dista does not require additional spacers because of its special shape. Armanet Dista can be easily attached to the supporting wall using galvanized nails or pop rivets. (in the indentations: min. /m 2 ) Reinforcing mesh with spacer Armanet Dista is a heavily galvanized wire mesh panel with indentations at regular intervals. These indentations act as spacers. The panels are secured to the wall at these locations. Separate spacers are therefore not required. Armanet Dista is used as reinforcing mesh for external insulation systems. Armanet Dista can be attached to various types of supporting structures: brickwork, insulation panels, concrete, plasterboard, etc. ± 1.0 kg ± 1.10 kg 992 mm ± 0.72 kg 2000 mm 60 mm 400 mm Overlaps: in both directions (lengthways and crossways) min. 4 meshes. Type DB Mortar thickness: min. 20 mm Fixing using nails or pop rivets. Fixing using mortar. For windows and doors, the panels are positioned on top of each other. Panels are fixed in the mortar.
Armanet Iso Product Specification Corrugated reinforced mesh Armanet Iso is a corrugated welded wire mesh panel galvanized after manufacture, that can be used as a plaster support or as reinforcing mesh for insulation mortars. Armanet Iso is especially suitable for wall insulation systems based on insulating mortars. These systems are used in new buildings, and for the renovation of existing walls. Wire diameter: 1.05 mm Mesh : 16 x 16 mm 90 mm 125 mm Dimensions: 210 x 99,2 cm 20 mm 30 mm Zinc: min. 350 g/m 2 Packaging: 20 panels/bundle 400 panels/pallet Type 20/90 Armanet Iso Type 30/125 Armanet Iso Installation Attachment Overlaps 1 wave golf Type WB galvanized nails or screws with washer (min. length 50 mm) quantity: min. /m 2 5 meshes 5 mazen lengthways: 5 meshes crossways: 1 corrugation Mortar covering min. 20 mm above the top of the corrugations. Armanet solves problems of crack formation. It is recommended to follow the instructions of the mortar manufacturer.
Armanet - fixing systems Type Distance Length of plugs Packaging Number/m 2 Armanet rolls and panels AB 60/ AB 0/ mm mm 60 mm 0 mm Armanet with thermal insulation AD 12/75 AD 25/95 12 mm 25 mm 75 mm 95 mm Armanet Dista DB 60 DB 0 60 mm 0 mm Armanet Iso WB 60 WB 0 60 mm 0 mm Bekaert Service Adresses In addition to Armanet, Armanet Dista, Armanet Iso Bekaert has a number of other related wire products Widra Corner beads manufactured from welded wire Widra BEKAERT Widra T H E C O N S T R U C T IVE IDE A Stucanet Wire panels for plastering BEKAERT Stucanet Stucanet T H E C O N S T R U C T IVE ID E A Poutrafil For the construction of partitioning Poutrafil Do you require more information? Please contact our Internet Website http://www.bekaert.com/building BEKAERT Poutrafil THE CONSTRUCTIVE IDEA Bekaert Building Products PO Box 119 Shepcote Lane GB - Sheffield S9 1TY Tel. (0)114/256 15 61 Fax (0)114/261 15 29 Outer European Countries: N.V. BEKAERT S.A. Bekaertstraat 2 B - 550 Zwevegem Tel. (0)56/76 69 6 Fax (0)56/76 79 47 Modifications reserved. All details describe our products in general form only. For ordering and design only use official specifications and documents. N.V. Bekaert S.A. 1997 Resp. Editor: P. Timperman, Zwevegem, Belgium (12/ 97) Joof / Nolf