CE Marking of Glass products

Similar documents

EN Insulating glass units, intended to be used in buildings and construction works

Trakya Cam Sanayii A.Ş. Adres: İş Kuleleri Kule Levent- İSTANBUL/TÜRKİYE 07 EN

Technical information

II. ALL ABOUT GLASS.

Glass unlimited YOURGLASS POCKET

EN NPD Reaction to fire. NPD External fire behaviour. NPD Bullet resistance. NPD Explosion resistance. NPD Burglar resistance (EN 356)

EN Insulating glass units, intended to be used in buildings and construction works

Solar control right for you!

MIROX 3G ENVIRONMENTALLY- FRIENDLY MIRROR

EN Insulating glass units, intended to be used in buildings and construction works

Trakya Cam Sanayii A.Ş. Adres: İş Kuleleri Kule Levent- İSTANBUL/TÜRKİYE 07 EN

EN Insulating glass units, intended to be used in buildings and construction works

EN Insulating glass units, intended to be used in buildings and construction works

Activities. but I will require that groups present research papers

iku windows the intelligent self cleaning window AUTOMATIC system

GUIDELINES FOR TRANSLATING THE EUROPASS CERTIFICATE SUPPLEMENT INTRODUCTION GENERAL RECOMMENDATIONS

TECHNISCHE FICHE - TECHNISCHE FICHE - Chat Board: Classic

Heat-treated Glass. GUARDIAN A Company of Vision PATTERNED GLASS HORTICULTURAL GLASS SUN PERFORMANCE GLASS VISION GLASS SILKSCREENED GLASS THIN GLASS

CrossLoop Help. What would you like to do? Joining A Session

The Daikin Configurator software is intended to be used in combination with the EKPCCAB* USB cable.

Pilkington Activ self-cleaning glass. The clear choice for your conservatory.

Classification of reaction to fire of glass products Recommendation from Glass for Europe

TECHNICAL BULLETIN TECHNICAL DESCRIPTION DESCRIPTION OVERVIEW PROGRAMS. Data Sheet. Pilkington Toughened Safety Glass

Pilkington Activ. The forecast will always be clear and cool. Pilkington Activ Range Self-cleaning and solar control glass for conservatories.

Important Notes Color

Solar Energy: The Power of the Sun by Kelly Hashway

Exterior glass solutions

Testing Rules for Thermal Conductivity October 2015

Pilkington Activ self-cleaning glass. The clear choice for your conservatory.

Elenco concessioni vetri stratificati (per le descrizioni complete dei modelli ed estensioni a loro eventuali varianti vedere certificato)

GET YOUR START MENU BACK IN MICROSOFT WINDOWS SERVER 2012

DOMUS & ALDUS THE WINDOW CONCEPT WITH A STUNNINGLY MODERN APPEARANCE

DOW CORNING SENEFFE (Belgium) DOW CORNING GmbH WIESBADEN (Germany) This version replaces ETA 03/0003 valid from until

Industry Insulation. Insulation Solutions for Industry Applications. New CE marking and Isover TECH product range

HD36. Bright super-sized images any time of day. Bright vivid colours 3,000 ANSI Lumens. Dynamic black technology - 30,000:1 contrast ratio

What is Solar Control?

Self-Cleaning. The forecast will always be clear and cool. Pilkington Activ Range Self-cleaning and solar control glass for conservatories.

Lindab Coverline TM. Lindab Tile Effect Roofing. Make a lasting impression

Artile. Italian tradition in a range of colors

WORKING DOCUMENT FOR SCC CONSULTATION CONSTRUCT09/874 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL

SELECTIVE GLAZING FOR SUN CONTROL

PRODUCT SPECIFICATIONS

List of materials (permanent storage)

SCHOTT PYRANOVA Planline System

ACRYLIC SHEET & BLOCKS. New Catalogue. issued in May 2012

The Industry s Most Advanced Sun-Sensing, Adaptive-Tinting Technology For Dynamic Windows

STANDING SEAM METAL ROOFING PANELS

UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.

Section 2.4. Built-up Metal Roofs. Rail and bracket system. Standing seam system. Bu02. Product: Earthwool FactoryClad range Bu01

3M Commercial Graphics. Colour Card Reference Guide. Scotchcal. Opaque Graphic Film. Series 100

PTC-Resistor Temperature-Sensors MINIKA to DIN and DIN

Assessment Report Construction Product Regulation* * CPR - REGULATION (EU) No 305/2011

Dow Corning PROPRIETARY. Dow Corning. A Thermal Modelling Comparison of Typical Curtain Wall Systems

Insulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW

Pilkington Reflite Handling and Processing Guidelines Solar Control

ACS-30-EU-EMDR-10-MOD

Mureva Assembly surface mounted wiring devices

Europeiskt Tekniskt Godkännande European Technical Approval

INFORMATION REGARDING GLASS TYPES AND PROPERTIES

The Peak of Protection

Solar Energy. Solar Energy range. NSG TEC Pilkington Microwhite Pilkington Optiwhite Pilkington Sunplus

Nordic quality steel with the widest color range

usb flash drives with logo delivery within 3 days

The Warm Edge for insulating glass

Residential Steel Roofing

Twin EL Wall luminaires for halogen lamps or ceramic metal halide lamps

Unbeatable energy efficient glass curtain wall system

CHOOSE THE RIGHT DOOR FOR YOUR HOME

Standard Architecture Color Offerings

RAL 1002 Sand yellow. RAL 1007 Daffodil yellow. RAL 1015 Lighti vory. RAL 1020 Olive yellow. RAL 1027 Curry yellow. RAL 1035 Pearl Beige

CertainTeed. Impact Resistant. Shingles. Shown in Landmark IR Weathered Wood. Est.1665

Humbrol conversions to other paint manufacturers

endurance SOLID CORE COMPOSITE DOORS

Omnisports Vinyl solutions

Il potere tra le tue mani

Community herbal monograph on Commiphora molmol Engler, gummi-resina

screens that fit you COLLECTION

Fire Resistant Systems

Impact-Resistant Windows and Sliding Glass Doors

WOODEN WINDOWS CATALOGUE.

Spandrel Glass Types and Recommendations

Low Bay High Bay. Lighting. Industrial Series. The best lighting level for better working performance.

ModuSec. Secure and efficient IT room solutions Composite Panel Systems Compared. Panel Systems are not all the same!

Community herbal monograph on Lavandula angustifolia Miller, aetheroleum

T H E P E N C O L L E C T I O N

Superconcrete. your green flooring choice

A pro s guide to photo prints on Alu-dibond

Flexible and safe solutions, for decades. Cables for alarmand safety systems

Simplify your palette

BRILLIANT, LONG LASTING PRINTS ON GLOSSY OR LUSTER FINISH PHOTOGRAPHIC PAPER. $1.49 $ X480

BUILDING INSTRUCTIONS

BAGS & WRAPPING. Bags & Wrapping - Great range, value & custom possibilities

first base 3 BUMP PROTECTION

Glass partitions SFB 3074

Shunt lock function 3066

Community herbal monograph on Arnica montana L., flos

Transcription:

CE Marking of Glass products INTRODUCTION... 10 ARTLITE... 11 ARTLITE / ARTLITE DIGITAL HEAT STRENGTHENED... 12 ARTLITE / ARTLITE DIGITAL THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 1 ARTLITE / ARTLITE DIGITAL THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 14 BLACKPEARL... 15 BLACKPEARL (ANNEALED)... 16 BLACKPEARL HEAT STRENGTHENED... 17 BLACKPEARL THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 18 COLORBEL... 19 COLORBEL HEAT STRENGTHENED... 20 COLORBEL THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 21 COLORBEL THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 22 CONCEPTA... 2 CONCEPTA... 24 GH PHON... 25 GH PHON... 26 GH PHON... 27 GH PHON... 28 IMAGIN... 29 IMAGIN CLEAR (ANNEALED)... 0 IMAGIN CLEAR (ANNEALED)... 1 IMAGIN CLEAR HEAT STRENGTHENED... 2 IMAGIN CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... IMAGIN CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 4 IMAGIN EXTRA CLEAR (ANNEALED)... 5 IMAGIN EXTRA CLEAR HEAT STRENGTHENED... 6 IMAGIN EXTRA CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 7 IMAGIN BRONZE (ANNEALED)... 8 IMAGIN BRONZE HEAT STRENGTHENED... 9 IMAGIN BRONZE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 40 IMAGIN YELLOW (ANNEALED)... 41 IMAGIN YELLOW HEAT STRENGTHENED... 42 IMAGIN YELLOW THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 4 IMAGIN WIRED... 44 IMAGIN WIRED CLEAR (ANNEALED)... 45 IMAGIN WIRED O AND WIRED S (ANNEALED)... 46 IMAGIN WIRED BRONZE (ANNEALED)... 47 IMAGIN WIRED YELLOW (ANNEALED)... 48 IPACLEAR... 49 IPACLEAR (ANNEALED)... 50 IPACLEAR HEAT STRENGTHENED... 51 IPACLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 52 IPASOL... 5 1

IPASOL BRIGHT NEUTRAL (ANNEALED)... 54 IPASOL BRIGHT WHITE (ANNEALED)... 55 IPASOL NEUTRAL 50/27 (ANNEALED)... 56 IPASOL NEUTRAL 60/ (ANNEALED)... 57 IPASOL NEUTRAL 69/7 (ANNEALED)... 58 IPASOL NEUTRAL 70/9 (ANNEALED)... 59 IPASOL NEUTRAL 7/42 (ANNEALED)... 60 IPASOL PLATIN 25/17 (ANNEALED)... 61 IPASOL PLATIN 47/29 (ANNEALED)... 62 IPASOL SHINE 40/22 (ANNEALED)... 6 IPASOL SKY 0/17 (ANNEALED)... 64 IPASOL ULTRASELECT 62/29 (ANNEALED)... 65 IPAWHITE... 66 IPAWHITE (ANNEALED)... 67 IPAWHITE HEAT STRENGTHENED... 68 IPAWHITE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 69 IPLUS... 70 IPLUS ADVANCED 1.0 (ANNEALED)... 71 IPLUS ADVANCED 1.0 ON CLEARVISION (ANNEALED)... 72 IPLUS AF (ANNEALED)... 7 IPLUS AF HEAT STRENGTHENED... 74 IPLUS AF THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 75 IPLUS AF ENERGY N (ANNEALED)... 76 IPLUS AF TOP (ANNEALED)... 77 IPLUS ENERGY N (ANNEALED)... 78 IPLUS ENERGY N ON CLEARVISION (ANNEALED)... 79 IPLUS ENERGY NT (ANNEALED)... 80 IPLUS ENERGY NT HEAT STRENGTHENED... 81 IPLUS ENERGY NT THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 82 IPLUS I-TOP (ANNEALED)... 8 IPLUS I-TOP ON CLEARVISION (ANNEALED)... 84 IPLUS LIGHT (ANNEALED)... 85 IPLUS LS (ANNEALED)... 86 IPLUS LST (ANNEALED)... 87 IPLUS LST HEAT STRENGTHENED... 88 IPLUS LST THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 89 IPLUS TOP 1.0 (ANNEALED)... 90 IPLUS TOP 1.1 (ANNEALED)... 91 IPLUS TOP 1.1 ON CLEARVISION (ANNEALED)... 92 IPLUS TOP 1.1T (ANNEALED)... 9 IPLUS TOP 1.1T HEAT STRENGTHENED... 94 IPLUS TOP 1.1T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 95 IPLUS TOP 1.1T ON CLEARVISION (ANNEALED)... 96 IPLUS TOP 1.1T ON CLEARVISION HEAT STRENGTHENED... 97 IPLUS TOP 1.1T ON CLEARVISION THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 98 IPLUS TWIN TOP (ANNEALED)... 99 IPLUS 1.0 (ANNEALED)... 100 IPLUS ALPHA N (ANNEALED)... 101 IPLUS ALPHA N HEAT STRENGTHENED... 102 IPLUS ALPHA N THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 10 IPLUS E (ANNEALED)... 104 IPLUS ET (ANNEALED)... 105 IPLUS ET HEAT STRENGTHENED... 106 IPLUS ET THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 107 IPLUS TWIN E (ANNEALED)... 108 LACOBEL T... 109 LACOBEL T HEAT STRENGTHENED... 110 LACOBEL T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 111 MIROX G... 112 2

MIROX G CLEAR... 11 MIROX G CLEARVISION... 114 MIROX G BLACK MIROX... 115 MIROX G BRONZE... 116 MIROX G GREEN... 117 MIROX G GREY... 118 MIROX G PRIVABLUE... 119 MIROX MNGE... 120 MIROX MNGE CLEAR... 121 MIROX MNGE CLEARVISION... 122 MIROX MNGE BLACK MIROX... 12 MIROX MNGE BRONZE... 124 MIROX MNGE GREEN... 125 MIROX MNGE GREY... 126 MIROX MNGE PRIVABLUE... 127 PLANIBEL CLEAR... 128 PLANIBEL CLEAR (ANNEALED)... 129 PLANIBEL CLEAR (ANNEALED)... 10 PLANIBEL CLEAR HEAT STRENGTHENED... 11 PLANIBEL CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 12 PLANIBEL LINEA AZZURRA (ANNEALED)... 1 PLANIBEL LINEA AZZURRA HEAT STRENGTHENED... 14 PLANIBEL LINEA AZZURRA THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 15 PLANIBEL CLEARVISION, SUNMAX, SUNMAX PREMIUM (ANNEALED)... 16 PLANIBEL CLEARVISION, SUNMAX, SUNMAX PREMIUM (ANNEALED)... 17 PLANIBEL CLEARVISION, SUNMAX, SUNMAX PREMIUM HEAT STRENGTHENED... 18 PLANIBEL CLEARVISION, SUNMAX, SUNMAX PREMIUM THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 19 PLANIBEL CLEARVISION, SUNMAX, SUNMAX PREMIUM THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 140 PLANIBEL CLEAR PLUS (ANNEALED)... 141 PLANIBEL COLOURED... 142 PLANIBEL AZUR (ANNEALED)... 14 PLANIBEL AZUR HEAT STRENGTHENED... 144 PLANIBEL AZUR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 145 PLANIBEL BRONZE (ANNEALED)... 146 PLANIBEL BRONZE HEAT STRENGTHENED... 147 PLANIBEL BRONZE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 148 PLANIBEL DARK BLUE (ANNEALED)... 149 PLANIBEL DARK BLUE HEAT STRENGTHENED... 150 PLANIBEL DARK BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 151 PLANIBEL DARK GREY (ANNEALED)... 152 PLANIBEL DARK GREY HEAT STRENGTHENED... 15 PLANIBEL DARK GREY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 154 PLANIBEL GREEN (ANNEALED)... 155 PLANIBEL GREEN HEAT STRENGTHENED... 156 PLANIBEL GREEN THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 157 PLANIBEL GREY (ANNEALED)... 158 PLANIBEL GREY HEAT STRENGTHENED... 159 PLANIBEL GREY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 160 PLANIBEL PRIVABLUE (ANNEALED)... 161 PLANIBEL PRIVABLUE HEAT STRENGTHENED... 162 PLANIBEL PRIVABLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 16 PLANIBEL LOW-E... 164 PLANIBEL A (ANNEALED)... 165 PLANIBEL A HEAT STRENGTHENED... 166 PLANIBEL A THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 167 PLANIBEL G (ANNEALED)... 168 PLANIBEL G HEAT STRENGTHENED... 169

PLANIBEL G THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 170 PLANIBEL G FAST (ANNEALED)... 171 PLANIBEL G FAST HEAT STRENGTHENED... 172 PLANIBEL G FAST THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 17 PLANIBEL HORTIPLUS N (ANNEALED)... 174 PLANIBEL HORTIPLUS N HEAT STRENGTHENED... 175 PLANIBEL HORTIPLUS N THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 176 AF IPLUS E (ANNEALED)... 177 PLANIBEL AF TOP N+ (ANNEALED)... 178 PLANIBEL TOP N (ANNEALED)... 179 PLANIBEL TOP N+ (ANNEALED)... 180 PLANIBEL TOP NT HEAT STRENGTHENED... 181 PLANIBEL TOP NT THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 182 PLANIBEL TOP N+T (ANNEALED)... 18 PLANIBEL TOP N+T HEAT STRENGTHENED... 184 PLANIBEL TOP N+T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 185 PLANIBEL TRI (ANNEALED)... 186 PLANIBEL TRI ON CLEARVISION (ANNEALED)... 187 POLISHED WIRED GLASS... 188 POLISHED WIRED GLASS... 189 PYROBELITE / PYROBEL... 190 PYROBELITE... 191 PYROBELITE... 192 PYROBELITE... 19 PYROBEL... 194 PYROBEL... 195 PYROBEL... 196 PYROBEL... 197 PYROBEL... 198 PYROBEL... 199 PYROBEL... 200 PYROBEL... 201 PYROBEL... 202 PYROPANE... 20 PYROPANE 100 PYROPANE 110... 204 PYROPANE 100 SB 0... 205 PYROPANE 151-70 ; 151-70/100 ; 152-70 ; 201 ; 201/100 ; 202... 206 PYROPANE 211-44... 207 PYROPANE 21-28... 208 PYROPANE 221-7... 209 PYROPANE 241-60 PYROPANE 204... 210 SOLAR PATTERNED GLASS... 211 ASTRALITE (ANNEALED)... 212 ASTRALITE THERMALLY TOUGHENED... 21 SOLATEX (ANNEALED)... 214 SOLATEX THERMALLY TOUGHENED... 215 SOLITE (ANNEALED)... 216 SOLITE THERMALLY TOUGHENED... 217 STOPRAY... 218 STOPRAY INDIGO 48T (ANNEALED)... 219 STOPRAY INDIGO 48T HEAT STRENGTHENED... 220 STOPRAY INDIGO 48T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 221 STOPRAY LIME 61T (ANNEALED)... 222 STOPRAY LIME 61T HEAT STRENGTHENED... 22 STOPRAY LIME 61T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 224 STOPRAY SILVER (ANNEALED)... 225 STOPRAY SILVER HEAT STRENGTHENED... 226 STOPRAY SILVER THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 227 4

STOPRAY SILVER ON CLEARVISION (ANNEALED)... 228 STOPRAY SILVER ON CLEARVISION HEAT STRENGTHENED... 229 STOPRAY SILVER ON CLEARVISION THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 20 STOPRAY SMART 0/20 (ANNEALED)... 21 STOPRAY SMART 0/20 HEAT STRENGTHENED... 22 STOPRAY SMART 0/20 THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 2 STOPRAY SMART 51/ (ANNEALED)... 24 STOPRAY SMART 51/ HEAT STRENGTHENED... 25 STOPRAY SMART 51/ THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 26 STOPRAY TITANIUM 7T (ANNEALED)... 27 STOPRAY TITANIUM 7T HEAT STRENGTHENED... 28 STOPRAY TITANIUM 7T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 29 STOPRAY VISION-6T (ANNEALED)... 240 STOPRAY VISION-6T HEAT STRENGTHENED... 241 STOPRAY VISION-6T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 242 STOPRAY VISION-50 (ANNEALED)... 24 STOPRAY VISION-50 ON CLEARVISION (ANNEALED)... 244 STOPRAY VISION-50T (ANNEALED)... 245 STOPRAY VISION-50T HEAT STRENGTHENED... 246 STOPRAY VISION-50T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 247 STOPRAY VISION-60 (ANNEALED)... 248 STOPRAY VISION-60T (ANNEALED)... 249 STOPRAY VISION-60T HEAT STRENGTHENED... 250 STOPRAY VISION-60T THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 251 STOPRAY ULTRA-50 ON CLEARVISION (ANNEALED)... 252 STOPRAY ULTRA-60 (ANNEALED)... 25 STOPRAY AQUAMARINE (ANNEALED)... 254 STOPRAY AQUAMARINE HEAT STRENGTHENED... 255 STOPRAY AQUAMARINE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 256 STOPRAY BLUE NIGHT (ANNEALED)... 257 STOPRAY BLUE NIGHT HEAT STRENGTHENED... 258 STOPRAY BLUE NIGHT THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 259 STOPRAY BRIGHT SEPIA (ANNEALED)... 260 STOPRAY BRIGHT SEPIA HEAT STRENGTHENED... 261 STOPRAY BRIGHT SEPIA THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 262 STOPRAY CARAT (ANNEALED)... 26 STOPRAY CARAT HEAT STRENGTHENED... 264 STOPRAY CARAT THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 265 STOPRAY CHROMA (ANNEALED)... 266 STOPRAY CHROMA HEAT STRENGTHENED... 267 STOPRAY CHROMA THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 268 STOPRAY CRISTAL (ANNEALED)... 269 STOPRAY CRISTAL HEAT STRENGTHENED... 270 STOPRAY CRISTAL THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 271 STOPRAY DEEP BLUE (ANNEALED)... 272 STOPRAY DEEP BLUE HEAT STRENGTHENED... 27 STOPRAY DEEP BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 274 STOPRAY ELITE (ANNEALED)... 275 STOPRAY ELITE HEAT STRENGTHENED... 276 STOPRAY ELITE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 277 STOPRAY ELITE ON CLEARVISION (ANNEALED)... 278 STOPRAY ELITE ON CLEARVISION HEAT STRENGTHENED... 279 STOPRAY ELITE ON CLEARVISION THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 280 STOPRAY EMERALDA (ANNEALED)... 281 STOPRAY EMERALDA HEAT STRENGTHENED... 282 STOPRAY EMERALDA THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 28 STOPRAY GALAXY (ANNEALED)... 284 STOPRAY GALAXY HEAT STRENGTHENED... 285 STOPRAY GALAXY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 286 STOPRAY GALAXY ON CLEARVISION (ANNEALED)... 287 STOPRAY GALAXY ON CLEARVISION HEAT STRENGTHENED... 288 STOPRAY GALAXY ON CLEARVISION THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 289 STOPRAY GRANIT GREY (ANNEALED)... 290 5

STOPRAY GRANIT GREY HEAT STRENGTHENED... 291 STOPRAY GRANIT GREY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 292 STOPRAY MARINE BLUE (ANNEALED)... 29 STOPRAY MARINE BLUE HEAT STRENGTHENED... 294 STOPRAY MARINE BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 295 STOPRAY METAL BLUE (ANNEALED)... 296 STOPRAY METAL BLUE HEAT STRENGTHENED... 297 STOPRAY METAL BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 298 STOPRAY NEUTRAL (ANNEALED)... 299 STOPRAY NEUTRAL HEAT STRENGTHENED... 00 STOPRAY NEUTRAL THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 01 STOPRAY OASIS (ANNEALED)... 02 STOPRAY OASIS HEAT STRENGTHENED... 0 STOPRAY OASIS THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 04 STOPRAY QUARTZ (ANNEALED)... 05 STOPRAY QUARTZ HEAT STRENGTHENED... 06 STOPRAY QUARTZ THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 07 STOPRAY REFLEX BLUE (ANNEALED)... 08 STOPRAY REFLEX BLUE HEAT STRENGTHENED... 09 STOPRAY REFLEX BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 10 STOPRAY SAFIR (ANNEALED)... 11 STOPRAY SAFIR HEAT STRENGTHENED... 12 STOPRAY SAFIR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 1 STOPRAY SAFIR ON CLEARVISION (ANNEALED)... 14 STOPRAY SAFIR ON CLEARVISION HEAT STRENGTHENED... 15 STOPRAY SAFIR ON CLEARVISION THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 16 STOPRAY SELVA (ANNEALED)... 17 STOPRAY SELVA HEAT STRENGTHENED... 18 STOPRAY SELVA THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 19 STOPRAY SIENNA (ANNEALED)... 20 STOPRAY SIENNA HEAT STRENGTHENED... 21 STOPRAY SIENNA THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 22 STOPRAY TOPAZ (ANNEALED)... 2 STOPRAY TOPAZ HEAT STRENGTHENED... 24 STOPRAY TOPAZ THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 25 STOPRAY ULTRAMARINE (ANNEALED)... 26 STOPRAY ULTRAMARINE HEAT STRENGTHENED... 27 STOPRAY ULTRAMARINE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 28 STOPSOL... 29 STOPSOL CLASSIC CLEAR (ANNEALED)... 0 STOPSOL CLASSIC CLEAR HEAT STRENGTHENED... 1 STOPSOL CLASSIC CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 2 STOPSOL CLASSIC BRONZE (ANNEALED)... STOPSOL CLASSIC BRONZE HEAT STRENGTHENED... 4 STOPSOL CLASSIC BRONZE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 5 STOPSOL CLASSIC DARK BLUE (ANNEALED)... 6 STOPSOL CLASSIC DARK BLUE HEAT STRENGTHENED... 7 STOPSOL CLASSIC DARK BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 8 STOPSOL CLASSIC GREEN (ANNEALED)... 9 STOPSOL CLASSIC GREEN HEAT STRENGTHENED... 40 STOPSOL CLASSIC GREEN THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 41 STOPSOL CLASSIC GREY (ANNEALED)... 42 STOPSOL CLASSIC GREY HEAT STRENGTHENED... 4 STOPSOL CLASSIC GREY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 44 STOPSOL PHOENIX CLEAR (ANNEALED)... 45 STOPSOL PHOENIX CLEAR HEAT STRENGTHENED... 46 STOPSOL PHOENIX CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 47 STOPSOL PHOENIX GREEN (ANNEALED)... 48 STOPSOL PHOENIX GREEN HEAT STRENGTHENED... 49 STOPSOL PHOENIX GREEN THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 50 STOPSOL PHOENIX GREY (ANNEALED)... 51 STOPSOL PHOENIX GREY HEAT STRENGTHENED... 52 6

STOPSOL PHOENIX GREY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 5 STOPSOL SILVERLIGHT PRIVABLUE (ANNEALED)... 54 STOPSOL SILVERLIGHT PRIVABLUE HEAT STRENGTHENED... 55 STOPSOL SILVERLIGHT PRIVABLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 56 STOPSOL SUPERSILVER CLEAR (ANNEALED)... 57 STOPSOL SUPERSILVER CLEAR HEAT STRENGTHENED... 58 STOPSOL SUPERSILVER CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 59 STOPSOL SUPERSILVER DARK BLUE (ANNEALED)... 60 STOPSOL SUPERSILVER DARK BLUE HEAT STRENGTHENED... 61 STOPSOL SUPERSILVER DARK BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 62 STOPSOL SUPERSILVER GREEN (ANNEALED)... 6 STOPSOL SUPERSILVER GREEN HEAT STRENGTHENED... 64 STOPSOL SUPERSILVER GREEN THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 65 STOPSOL SUPERSILVER GREY (ANNEALED)... 66 STOPSOL SUPERSILVER GREY HEAT STRENGTHENED... 67 STOPSOL SUPERSILVER GREY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 68 STRATOBEL... 69 STRATOBEL CLEAR (22.X,.X)... 70 STRATOBEL CLEAR (44.X, 55.X)... 71 STRATOBEL CLEAR (66.X)... 72 STRATOBEL CLEAR (88.X, 10 10.X)... 7 STRATOBEL LINEA AZZURRA (88.X, 10 10.X)... 74 STRATOBEL IPLUS ENERGY N... 75 STRATOBEL IPLUS G... 76 STRATOBEL IPLUS I-TOP... 77 STRATOBEL IPLUS I-TOP... 78 STRATOBEL IPLUS LIGHT... 79 STRATOBEL IPLUS TOP 1.0... 80 STRATOBEL IPLUS TOP 1.0... 81 STRATOBEL LOW-E TOP N... 82 STRATOBEL LOW-E TOP N+... 8 STRATOBEL LOW-E TOP N+... 84 STRATOBEL LOW-E TRI... 85 STRATOBEL LOW-E TRI... 86 STRATOBEL STOPRAY LAMISMART 24... 87 STRATOBEL STOPRAY LAMISMART 24 (LAMINATED WITH PLANIBEL BRONZE)... 88 STRATOBEL STOPRAY LAMISMART 24 (LAMINATED WITH PLANIBEL DARK BLUE)... 89 STRATOBEL STOPRAY LAMISMART 24 (LAMINATED WITH PLANIBEL GREEN)... 90 STRATOBEL STOPRAY LAMISMART 24 (LAMINATED WITH PLANIBEL GREY)... 91 STRATOBEL (BURGLAR RESISTANT)... 92 STRATOBEL (BULLET RESISTANT)... 9 STRATOBEL (BULLET RESISTANT)... 94 STRATOBEL (BULLET RESISTANT)... 95 STRATOBEL (BULLET RESISTANT)... 96 STRATOBEL (BULLET RESISTANT)... 97 STRATOBEL (BULLET RESISTANT)... 98 STRATOBEL (BULLET RESISTANT)... 99 STRATOBEL (BULLET RESISTANT) IN DGU... 400 STRATOBEL (BULLET RESISTANT) IN DGU... 401 STRATOBEL (BULLET RESISTANT) IN DGU... 402 STRATOBEL (BLAST RESISTANT)... 40 STRATOBEL COLOR STANDARD... 404 STRATOBEL COLOR STANDARD... 405 STRATOBEL COLOR RAINNBOW... 406 STRATOBEL COLOR RAINBOW... 407 STRATOBEL COLOR RAINBOW... 408 STRATOBEL EVA... 409 STRATOBEL EVA... 410 STRATOBEL IMPRESSION... 411 STRATOBEL IMPRESSION... 412 7

STRATOBEL PC... 41 STRATOBEL PC (BURGLAR RESISTANT)... 414 STRATOBEL PC (BULLET RESISTANT)... 415 STRATOBEL PC (BULLET RESISTANT)... 416 STRATOBEL PC (BULLET RESISTANT) IN DGU... 417 STRATOBEL OTHER PRODUCTS... 418 STRATOBEL OTHER PRODUCTS (LEVEL )... 419 STRATOBEL OTHER PRODUCTS (LEVEL 1)... 420 STRATOBEL OTHER PRODUCTS (LEVEL )... 421 STRATOBEL OTHER PRODUCTS (LEVEL 1)... 422 STRATOPHONE... 42 STRATOPHONE CLEAR (22.X,.X)... 424 STRATOPHONE CLEAR (44.X)... 425 STRATOPHONE CLEAR (55.X, 66.X, 88.X)... 426 STRATOPHONE IPLUS ENERGY N... 427 STRATOPHONE IPLUS I-TOP... 428 STRATOPHONE IPLUS LIGHT... 429 STRATOPHONE IPLUS TOP 1.0... 40 STRATOPHONE IPLUS TOP 1.0... 41 STRATOPHONE LOW-E TOP N... 42 STRATOPHONE LOW-E TOP N+... 4 STRATOPHONE LOW-E TRI... 44 SUNERGY... 45 SUNERGY CLEAR (ANNEALED)... 46 SUNERGY CLEAR HEAT STRENGTHENED... 47 SUNERGY CLEAR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 48 SUNERGY AZUR (ANNEALED)... 49 SUNERGY AZUR HEAT STRENGTHENED... 440 SUNERGY AZUR THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 441 SUNERGY DARK BLUE (ANNEALED)... 442 SUNERGY DARK BLUE HEAT STRENGTHENED... 44 SUNERGY DARK BLUE THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 444 SUNERGY GREEN (ANNEALED)... 445 SUNERGY GREEN HEAT STRENGTHENED... 446 SUNERGY GREEN THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 447 SUNERGY GREY (ANNEALED)... 448 SUNERGY GREY HEAT STRENGTHENED... 449 SUNERGY GREY THERMALLY TOUGHENED OR HEAT SOAKED THERMALLY TOUGHENED... 450 SUNEWAT... 451 SUNEWAT L 44.4 HEAT STENGTHENED... 452 SUNEWAT L 44.4 THERMALLY TOUGHENED... 45 SUNEWAT XL 55.6 THERMALLY TOUGHENED... 454 SUNEWAT XL 66.6 THERMALLY TOUGHENED... 455 SUNEWAT XL 88.6 THERMALLY TOUGHENED... 456 SUNEWAT XL 10 10.6 THERMALLY TOUGHENED... 457 THERMALLY TOUGHENED GLASS FOR SHOWER ENCLOSURE... 458 THERMOBEL... 460 THERMOBEL (LEVEL PRODUCTS)... 461 THERMOBEL (LEVEL 1 PRODUCTS)... 462 THERMOBEL VIP... 46 THERMOBEL VIP... 464 THERMOBEL VIP... 465 THERMOBEL VIP... 466 THERMOBEL VIP... 467 TRANSLATIONS... 468 8

ENGLISH BULGARIAN (БЪЛГАРСКИ)... 469 ENGLISH ČEŠTINA... 470 ENGLISH DANSK... 471 ENGLISH DEUTSCH... 472 ENGLISH EESTI KEEL... 47 ENGLISH ελληνικα... 474 ENGLISH ESPAÑOL... 475 ENGLISH FRANÇAIS... 476 ENGLISH ITALIANO... 477 ENGLISH LATVIEŠU VALODA... 478 ENGLISH LIETUVIU KALBA... 479 ENGLISH MAGYAR... 480 ENGLISH NEDERLANDS... 481 ENGLISH NORKS... 482 ENGLISH POLSKI... 48 ENGLISH ROMANIAN... 484 ENGLISH PORTUGUÊS... 485 ENGLISH SLOVENČINA... 486 ENGLISH SLOVENŠČINA... 487 ENGLISH SUOMI... 488 ENGLISH SVENSKA... 489 9

Introduction This file gives CE declarations and performances for basis glass products of AGC Glass Europe : Float Patterned glass Wired glas Polished wired glass Coatings Heat treated glass For laminated glass and insulating glass unit, some glass compositions are indicated but it is not possible to list all glass structures. The CE declarations and performances of these products are available on www.yourglass.com in one of the dynamic tools of My Glass Toolbox: Advanced product finder Glass Configurator General informations concerning CE-Marking and links to these tools are available at www.yourglass.com/ce. Remark Some products listed in this file are out of range, not standard in catalogue and/or only dedicated to a specific market. For the availability, please consult www.yourglass.com. 10

Artlite 11

CE Marking of Heat strengthened glass - EN 186-2:2004 Artlite / Artlite Digital Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Artlite / Artlite Digital Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Artlite/Artlite Digital Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 12

CE Marking of Thermally toughened glass - EN 12150-2:2004:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Artlite / Artlite Digital Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Artlite/Artlite Digital Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004:2004 / EN 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Artlite/Artlite Digital Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 1

CE Marking of Thermally toughened glass - EN 12150-2:2004:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Artlite / Artlite Digital Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Artlite/Artlite Digital Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004:2004 / EN 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Artlite/Artlite Digital Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 12 mm 15 mm 19 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 5 (-2;-) NPD NPD 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 14

Blackpearl 15

CE Marking of Coated glass - EN 1096-4:2004 Blackpearl (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Blackpearl, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Blackpearl characteristics in : AVCP Systems 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 A1. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-2) 11. - U-value (EN 67) 5,7 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 2/2/5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2/26/4 24 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 16

CE Marking of Heat strengthened glass - EN 186-2:2004 Blackpearl Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Blackpearl Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Blackpearl Heat strengthened characteristics in : AVCP Systems 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 A1. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-2) 11. - U-value (EN 67) 5,7 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 2/2/5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2/26/4 24 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 17

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Blackpearl Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Blackpearl Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / EN 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Blackpearl Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 A1. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-2) 11. - U-value (EN 67) 5,7 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 2/2/5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2/26/4 24 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 18

Colorbel 19

CE Marking of Heat strengthened glass - EN 186-2:2004 Colorbel Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Colorbel Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Colorbel Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 20

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Colorbel Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Colorbel Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Colorbel Thermally toughened or Heat soaked thermally toughened AVCP characteristics in : Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 21

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Colorbel Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Colorbel Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Colorbel Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 12 mm 15 mm 19 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 5 (-2;-) NPD NPD 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 22

Concepta 2

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Concepta Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Concepta, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Concepta characteristics: AVCP Systems.2 44.2 55.2 66.2 88.2 10 10.2 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 24

GH Phon 25

CE Marking of Laminated glass EN 14449:2005 + AC:2005 GH Phon Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named GH Phon, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 GH Phon characteristics in : AVCP Systems 4-1-4 4-1,5-4 4-1-5 4-1,5-5 4-1-6 4-1,5-6 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 7 (-1;-2) NPD NPD NPD NPD 11. - U-value (EN 67) 5,5 5,5 5,5 5,5 5,5 5,4 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 8 / 8 88 / 8 / 8 87 / 8 / 8 87 / 8 / 8 87 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 76 / 7 / 7 75 / 7 / 7 74 / 7 / 7 74 / 7 / 7 7 / 7 / 7 72 / 7 / 7 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 26

CE Marking of Laminated glass EN 14449:2005 + AC:2005 GH Phon Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named GH Phon, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 GH Phon characteristics in : AVCP Systems 5-1-5 5-1,5-5 6-1-6 6-1,5-6 8-1-6 8-1,5-6 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 8 (0;-2) NPD 8 (0;-) NPD NPD 11. - U-value (EN 67) 5,5 5,4 5,4 5,4 5,4 5, 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 8 / 8 87 / 8 / 8 86 / 8 / 8 86 / 8 / 8 85 / 8 / 8 85 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 72 / 7 / 7 70 / 7 / 7 69 / 7 / 7 68 / 7 / 7 67 / 6 / 6 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 27

CE Marking of Laminated glass EN 14449:2005 + AC:2005 GH Phon Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named GH Phon, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 GH Phon characteristics in : AVCP Systems 8-1-8 8-1,5-8 8-1-10 8-1,5-10 10-1-10 10-1,5-10 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5, 5,2 5,2 5,2 5,2 5,2 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 8 / 8 84 / 8 / 8 8 / 8 / 8 8 / 8 / 8 82 / 7 / 7 82 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 65 / 6 / 6 65 / 6 / 6 6 / 6 / 6 6 / 6 / 6 61 / 6 / 6 60 / 6 / 6 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 28

Imagin 29

CE Marking of Patterned glass - EN 572-9:2004 Imagin clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Clear, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin clear characteristics in : AVCP Systems 2 mm mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 88 / 8 / 8 86 / 8 / 8 84 / 8 / 8 82 / 7 / 7 80 / 7 / 7 77 / 7 / 7 89 87 86 85 8 81 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 0

CE Marking of Patterned glass - EN 572-9:2004 Imagin clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Clear, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin clear characteristics in : AVCP Systems 10 mm 1,5 mm 15 mm 19mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-2;-) NPD NPD NPD 11. - U-value (EN 67) 5,6 5,5 5,5 5,4 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 8 / 8 85 / 8 / 8 84 / 8 / 8 82 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 74 / 7 / 7 70 / 7 / 7 67 / 6 / 6 6 / 6 / 6 79 NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 1

CE Marking of Heat strengthened glass - EN 186-2:2004 Imagin clear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Clear Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin clear Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 87 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 84 / 8 / 8 82 / 7 / 7 80 / 7 / 7 77 / 7 / 7 74 / 7 / 7 86 85 8 81 79 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 2

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Imagin clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin clear Thermally toughened or Heat soaked thermally toughened AVCP 4 mm 5 mm 6 mm 8 mm 10 mm characteristics in : Systems 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 87 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 84 / 8 / 8 82 / 7 / 7 80 / 7 / 7 77 / 7 / 7 74 / 7 / 7 86 85 8 81 79 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Imagin clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin clear Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 1,5 mm 15 mm 19mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5,5 5,5 5,4 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 85 / 8 / 8 84 / 8 / 8 82 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 7 / 7 67 / 6 / 6 6 / 6 / 6 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 4

CE Marking of Patterned glass EN 572-9:2004 Imagin extra clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Extra Clear, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin extra clear characteristics in : AVCP Systems 2 mm mm 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92/8/8 92/8/8 92/8/8 91/8/8 91/8/8 91/8/8 91/8/8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91/8/8 91/8/8 91/8/8 91/8/8 90/8/8 90/8/8 90/8/8 NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 5

CE Marking of Heat strengthened glass - EN 186-2:2004 Imagin extra clear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Extra Clear Heat strengthened, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin extra clear Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92/8/8 91/8/8 91/8/8 91/8/8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91/8/8 91/8/8 90/8/8 90/8/8 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 6

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Imagin extra clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Extra Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin extra clear Thermally toughened or Heat soaked thermally AVCP toughened characteristics in : Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92/8/8 91/8/8 91/8/8 91/8/8 91/8/8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91/8/8 91/8/8 90/8/8 90/8/8 90/8/8 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 7

CE Marking of Wired patterned glass - EN 572-9:2004 Imagin bronze (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Bronze, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin bronze characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 59 / 6 / 6 52 / 6 / 6 46 / 5 / 5 7 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 60 / 6 / 6 54 / 6 / 6 49 / 5 / 5 40 / 5 / 5 68 64 60 5 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 8

CE Marking of Heat strengthened glass - EN 186-2:2004 Imagin bronze Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Bronze Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin bronze Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 59 / 6 / 6 52 / 6 / 6 46 / 5 / 5 7 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 60 / 6 / 6 54 / 6 / 6 49 / 5 / 5 40 / 5 / 5 68 64 60 5 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 9

CE Marking of Thermally toughened - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened or - EN 14179-2:2005 Imagin bronze Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Bronze Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin bronze Thermally toughened or Heat soaked thermally AVCP toughened characteristics in : Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 59 / 6 / 6 52 / 6 / 6 46 / 5 / 5 7 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 60 / 6 / 6 54 / 6 / 6 49 / 5 / 5 40 / 5 / 5 68 64 60 5 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 40

CE Marking of Wired patterned glass - EN 572-9:2004 Imagin yellow (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Yellow, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin yellow characteristics in : AVCP Systems 4 mm 5 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 7 / 7 / 7 69 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 61 / 6 / 6 55 / 6 / 6 69 65 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 41

CE Marking of Heat strengthened glass - EN 186-2:2004 Imagin yellow Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Yellow Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin yellow Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 7 / 7 / 7 69 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 61 / 6 / 6 55 / 6 / 6 69 65 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 42

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Imagin yellow Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Yellow Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin yellow Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 7 / 7 / 7 69 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 61 / 6 / 6 55 / 6 / 6 69 65 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 4

Imagin wired 44

CE Marking of Wired patterned glass - EN 572-9:2004 Imagin wired clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Wired Clear, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin wired clear characteristics in : AVCP Systems 6 mm 7 mm 9 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5,7 5,7 5,6 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 8 / 8 88 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 80 / 7 / 7 79 / 7 / 7 76 / 7 / 7 8 NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 45

CE Marking of Wired patterned glass - EN 572-9:2004 Imagin wired O and wired S (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Wired O and Wired S, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin wired clear characteristics in : AVCP Systems Wired O 6 mm Wired S 6 mm Wired S 7 mm 1. Resistance to fire (EN 1501-2) 1 E45 E 0 E 0 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5,7 5,7 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 8 / 8 89 / 8 / 8 88 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 80 / 7 / 7 80 / 7 / 7 79 / 7 / 7 8 8 NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 46

CE Marking of Wired patterned glass - EN 572-9:2004 Imagin wired bronze (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Wired Bronze, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin wired bronze characteristics in : AVCP Systems 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 A1. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 11. - U-value (EN 67) 5,7 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 46 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 49 / 5 / 5 60 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 47

CE Marking of Wired patterned glass - EN 572-9:2004 Imagin wired yellow (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Imagin Wired Yellow, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Imagin wired yellow characteristics in : AVCP Systems 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 A1. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 11. - U-value (EN 67) 5,7 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 65 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 51 / 6 / 6 61 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 48

ipaclear 49

CE Marking of Float glass - EN 572-9:2004 ipaclear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipaclear, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipaclear characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 5,6 5,5 NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 88 / 8 / 8 87 / 8 / 8 86 / 8 / 8 86 / 8 / 8 84 / 8 / 8 82 / 8 / 8 81 / 8 / 8 NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of June Primary Sales & Strategic, Marketing Director, Building 50

CE Marking of Heat strengthened glass - EN 186-2:2004 ipaclear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipaclear Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipaclear Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 5,6 NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 87 / 8 / 8 86 / 8 / 8 86 / 8 / 8 84 / 8 / 8 82 / 8 / 8 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of June Primary Sales & Strategic, Marketing Director, Building 51

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 ipaclear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipaclear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipaclear Thermally toughened or Heat soaked thermally toughened AVCP characteristics in : Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 5,6 5,5 NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 88 / 8 / 8 87 / 8 / 8 86 / 8 / 8 86 / 8 / 8 84 / 8 / 8 82 / 8 / 8 81 / 8 / 8 NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of June Primary Sales & Strategic, Marketing Director, Building 52

ipasol 5

CE Marking of Coated glass - EN 1096-4:2004 ipasol bright neutral (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol bright neutral, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol bright neutral characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 64 / 4 / 6 / 5 / 62 / 4 / 2 61 / 4 / 1 61 / 4 / 1 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66 / 27 / 25 6 / 27 / 2 60 / 27 / 22 57 / 26 / 21 55 / 26 / 20 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 54

CE Marking of Coated glass - EN 1096-4:2004 ipasol bright white (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol bright white, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol bright white characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 65 / 5 / 4 65 / 5 / 4 64 / 5 / 4 64 / 5 / 4 64 / 5 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 27 / 27 70 / 27 / 26 69 / 27 / 26 68 / 27 / 26 68 / 27 / 25 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 55

CE Marking of Coated glass - EN 1096-4:2004 ipasol neutral 50/27 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol neutral 50/27, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol neutral 50/27 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,02 0,02 0,02 0,02 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 55 / 4 / 6 55 / 4 / 6 54 / 4 / 6 54 / 4 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 27 / 40 / 26 27 / 40 / 24 27 / 40 / 2 26 / 40 / 21 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 56

CE Marking of Coated glass - EN 1096-4:2004 ipasol neutral 60/ (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol neutral 60/, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol neutral 60/ characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 66 / 6 / 7 66 / 6 / 7 65 / 6 / 7 64 / 6 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 9 / 28 / 9 / 25 2 / 9 / 2 2 / 9 / 21 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 57

CE Marking of Coated glass - EN 1096-4:2004 ipasol neutral 69/7 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol neutral 69/7, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol neutral 69/7 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 76 / 6 / 7 75 / 6 / 7 75 / 6 / 7 74 / 6 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 4 / 1 7 / 4 / 28 7 / 4 / 26 6 / 4 / 24 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 58

CE Marking of Coated glass - EN 1096-4:2004 ipasol neutral 70/9 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol neutral 70/9, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol neutral 70/9 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 5 / 7 76 / 5 / 7 76 / 5 / 7 75 / 5 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 41 / 28 9 / 41 / 25 8 / 41 / 2 8 / 41 / 21 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 59

CE Marking of Coated glass - EN 1096-4:2004 ipasol neutral 7/42 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol neutral 7/42, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol neutral 7/42 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 4 / 5 80 / 4 / 5 79 / 4 / 5 78 / 4 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 6 / 25 4 / 6 / 22 42 / 6 / 20 41 / 6 / 18 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 60

CE Marking of Coated glass - EN 1096-4:2004 ipasol platin 25/17 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol platin 25/17, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol platin 25/17 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,02 0,02 0,02 0,02 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 27 / 0 / 6 27 / 0 / 6 26 / 0 / 62 26 / 0 / 61 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 17 / 52 / 64 17 / 52 / 62 17 / 52 / 59 17 / 52 / 57 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 61

CE Marking of Coated glass - EN 1096-4:2004 ipasol platin 47/29 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol platin 47/29, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol platin 47/29 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 51 / 26 / 8 50 / 26 / 7 50 / 26 / 7 49 / 26 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 50 / 42 29 / 50 / 9 28 / 50 / 6 28 / 50 / 4 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 62

CE Marking of Coated glass - EN 1096-4:2004 ipasol shine 40/22 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol shine 40/22, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol shine 40/22 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 44 / 5 / 15 44 / 5 / 15 44 / 5 / 14 4 / 5 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 44 / 27 21 / 44 / 25 21 / 44 / 24 20 / 44 / 22 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 6

CE Marking of Coated glass - EN 1096-4:2004 ipasol sky 0/17 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol sky 0/17, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol sky 0/17 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 4 / 17 / 4 / 17 2 / 4 / 17 2 / 4 / 16 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 15 / 45 / 2 15 / 45 / 21 15 / 45 / 19 15 / 45 / 18 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 64

CE Marking of Coated glass - EN 1096-4:2004 ipasol ultraselect 62/29 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipasol ultraselect 62/29, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipasol ultraselect 62/29 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / / 6 68 / / 6 68 / / 6 67 / / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 46 / 8 0 / 46 / 6 0 / 46 / 4 0 / 46 / 2 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 65

ipawhite 66

CE Marking of Float glass - EN 572-9:2004 ipawhite (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipawhite, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipawhite characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 5,6 5,5 NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 90 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 88 / 8 / 8 87 / 8 / 8 NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of June Primary Sales & Strategic, Marketing Director, Building 67

CE Marking of Heat strengthened glass - EN 186-2:2004 ipawhite Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipawhite Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipawhite Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 5,6 NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 88 / 8 / 8 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of June Primary Sales & Strategic, Marketing Director, Building 68

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 ipawhite Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named ipawhite Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 ipawhite Thermally toughened or Heat soaked thermally toughened AVCP characteristics in : Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 5,6 5,5 NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 90 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 88 / 8 / 8 87 / 8 / 8 NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of June Primary Sales & Strategic, Marketing Director, Building 69

iplus 70

CE Marking of Coated glass - EN 1096-4:2004 iplus Advanced 1.0 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Advanced 1.0, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Advanced 1.0 characteristics in : AVCP Sytems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 8 / 10 8 / 8 / 10 8 / 8 / 10 81 / 8 / 10 80 / 8 / 10 79 / 8 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 54 / 6 / 29 5 / 6 / 28 52 / 6 / 27 50 / 6 / 24 49 / 6 / 22 47 / 6 / 20 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 71

CE Marking of Coated glass - EN 1096-4:2004 iplus Advanced 1.0 on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Advanced 1.0 on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Advanced 1.0 on Clearvision characteristics in : AVCP Sytems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 8 / 10 86 / 8 / 10 86 / 8 / 10 86 / 8 / 10 85 / 8 / 10 85 / 8 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 57 / 6 / 5 57 / 6 / 5 56 / 6 / 5 56 / 6 / 4 56 / 6 / 56 / 6 / NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 72

CE Marking of Coated glass - EN 1096-4:2004 iplus AF (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus AF, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus AF characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 12 / 12 8 / 12 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 78 / 11 / 10 75 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 7

CE Marking of Heat strengthened glass - EN 186-2:2004 iplus AF Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus AF Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus AF Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 12 / 12 8 / 12 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 78 / 11 / 10 75 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 74

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 iplus AF Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus AF Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus AF Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 12 / 12 8 / 12 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 78 / 11 / 10 75 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 75

CE Marking of Coated glass - EN 1096-4:2004 iplus AF Energy N (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus AF Energy N, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus AF Energy N characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 75 / 10 / 11 74 / 10 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 42 / 1 9 / 42 / 29 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 76

CE Marking of Coated glass - EN 1096-4:2004 iplus AF Top (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus AF Top, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus AF Top characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 9 / 10 8 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 60 / 29 / 22 58 / 28 / 20 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 77

CE Marking of Coated glass EN 1096-4:2004 iplus Energy N (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Energy N, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Energy N characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 80 / 7 / 7 79 / 7 / 7 78 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 41 / 2 42 / 41 / 29 41 / 41 / 26 40 / 41 / 2 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 78

CE Marking of Coated glass EN 1096-4:2004 iplus Energy N on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Energy N on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Energy N on Clearvision characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 7 / 7 82 / 7 / 7 82 / 7 / 7 82 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 41 / 42 44 / 41 / 40 44 / 41 / 8 44 / 41 / 7 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 79

CE Marking of Coated glass - EN 1096-4:2004 iplus Energy NT (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Energy NT, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Energy NT characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 80

CE Marking of Heat strengthened glass - EN 186-2:2004 iplus Energy NT Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Energy NT Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Energy NT Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 80 / 7 / 7 79 / 7 / 7 78 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 40 / 4 / 40 / 29 42 / 40 / 26 41 / 40 / 24 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 81

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 iplus Energy NT Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Energy NT Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Energy NT Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 80 / 7 / 7 79 / 7 / 7 78 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 40 / 4 / 40 / 29 42 / 40 / 26 41 / 40 / 24 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 82

CE Marking of Coated glass - EN 1096-4:2004 iplus I-Top (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus I-Top, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus I-Top characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 6 / 7 87 / 6 / 7 86 / 6 / 7 86 / 5 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 29 / 24 58 / 29 / 22 57 / 29 / 21 56 / 28 / 19 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 8

CE Marking of Coated glass - EN 1096-4:2004 iplus I-Top on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus I-Top on clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus I-Top on Clearvision characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 6 / 7 89 / 6 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 6 / 29 / 29 6 / 29 / 29 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 84

CE Marking of Coated glass - EN 1096-4:2004 iplus Light (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Light, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Light characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 19 / 21 71 / 19 / 21 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 4 / 4 42 / 4 / 0 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 85

CE Marking of Coated glass - EN 1096-4:2004 iplus LS (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus LS, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus LS characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,08 0,08 0,08 0,08 0,08 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 6 / 6 90 / 6 / 6 89 / 6 / 6 89 / 6 / 6 88 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 18 / 16 7 / 18 / 16 72 / 18 / 15 71 / 18 / 15 69 / 17 / 14 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 86

CE Marking of Coated glass - EN 1096-4:2004 iplus LST (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus LST, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus LST characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 87

CE Marking of Heat strengthened glass - EN 186-2:2004 iplus LST Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus LST Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus LST Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,08 0,08 0,08 0,08 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 6 / 6 89 / 6 / 6 89 / 6 / 6 88 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 18 / 16 72 / 18 / 15 71 / 18 / 15 69 / 17 / 14 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 88

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 iplus LST Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus LST Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus LST Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,08 0,08 0,08 0,08 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 6 / 6 89 / 6 / 6 89 / 6 / 6 88 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 18 / 16 72 / 18 / 15 71 / 18 / 15 69 / 17 / 14 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 89

CE Marking of Coated glass - EN 1096-4:2004 iplus Top 1.0 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.0, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus top 1.0 characteristics in : AVCP Systems mm 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 15 / 17 77 / 15 / 17 76 / 15 / 17 76 / 15 / 17 75 / 15 / 16 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 48 / 42 / 9 47 / 42 / 8 46 / 42 / 5 45 / 42 / 2 44 / 42 / 0 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 90

CE Marking of Coated glass - EN 1096-4:2004 iplus Top 1.1 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1 characteristics in : AVCP Sytems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 5 / 6 88 / 5 / 6 88 / 5 / 6 87 / 5 / 6 85 / 5 / 6 84 / 5 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 6 / 27 / 21 62 / 26 / 20 61 / 26 / 19 59 / 26 / 17 57 / 26 / 16 55 / 26 / 15 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 91

CE Marking of Coated glass - EN 1096-4:2004 iplus Top 1.1 on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1 on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1 on Clearvision characteristics in : AVCP Sytems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 5 / 6 91 / 5 / 6 91 / 5 / 6 91 / 5 / 6 91 / 5 / 6 91 / 5 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 27 / 26 67 / 27 / 25 67 / 27 / 25 67 / 27 / 24 66 / 27 / 24 66 / 27 / 24 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 92

CE Marking of Coated glass - EN 1096-4:2004 iplus Top 1.1T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1T characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 9

CE Marking of Heat strengthened glass - EN 186-2:2004 iplus Top 1.1T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1T Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 5 / 5 89 / 5 / 5 89 / 5 / 5 87 / 5 / 5 86 / 4 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 65 / 25 / 20 64 / 25 / 19 6 / 25 / 18 61 / 24 / 16 59 / 24 / 15 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 94

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 iplus Top 1.1T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 5 / 5 89 / 5 / 5 89 / 5 / 5 87 / 5 / 5 86 / 4 / 5 85 / 4 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 65 / 25 / 20 64 / 25 / 19 6 / 25 / 18 61 / 24 / 16 59 / 24 / 15 57 / 24 / 14 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 95

CE Marking of Coated glass - EN 1096-4:2004 iplus Top 1.1T on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1T on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1T on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 96

CE Marking of Heat strengthened glass - EN 186-2:2004 iplus Top 1.1T on Clearvision Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1T on Clearvision Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1T on Clearvision Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 5 / 5 92 / 5 / 5 92 / 5 / 5 92 / 5 / 5 92 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 25 / 24 70 / 25 / 24 69 / 25 / 2 69 / 25 / 2 69 / 25 / 22 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 97

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 iplus Top 1.1T on Clearvision Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Top 1.1T on Clearvision Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Top 1.1T on Clearvision Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 5 / 5 92 / 5 / 5 92 / 5 / 5 92 / 5 / 5 92 / 5 / 5 91 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 25 / 24 70 / 25 / 24 69 / 25 / 2 69 / 25 / 2 69 / 25 / 22 68 / 25 / 22 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 98

CE Marking of Coated glass - EN 1096-4:2004 iplus Twin Top (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Twin Top, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Twin Top characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 9 / 10 8 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 60 / 29 / 22 58 / 28 / 20 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 99

CE Marking of Coated glass - EN 1096-4:2004 iplus 1.0 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus 1.0, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus 1.0 characteristics in : AVCP Sytems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 12 / 14 81 / 12 / 14 80 / 12 / 14 80 / 12 / 14 79 / 12 / 1 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 52 / 9 / 51 / 9 / 2 50 / 9 / 0 49 / 9 / 28 48 / 9 / 26 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 100

CE Marking of Coated glass - EN 1096-4:2004 iplus Alpha N (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Alpha N, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Alpha N characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,06 0,06 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 5 / 5 89 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 72 / 19 / 17 71 / 19 / 16 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 101

CE Marking of Heat strengthened glass - EN 186-2:2004 iplus Alpha N Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Alpha N Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Alpha N Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 5 / 5 89 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 72 / 19 / 17 71 / 19 / 16 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 102

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 iplus Alpha N Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Alpha N Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Alpha N Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 5 / 5 89 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 72 / 19 / 17 71 / 19 / 16 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 10

CE Marking of Coated glass - EN 1096-4:2004 iplus E (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus E, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus E characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 5 / 6 88 / 5 / 6 88 / 5 / 5 87 / 5 / 5 86 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 62 / 27 / 22 61 / 27 / 21 60 / 27 / 20 58 / 27 / 18 56 / 27 / 16 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 104

CE Marking of Coated glass - EN 1096-4:2004 iplus ET (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus ET, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus ET characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 105

CE Marking of Heat strengthened glass - EN 186-2:2004 iplus ET Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus ET Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus ET Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 7 / 8 86 / 7 / 8 85 / 7 / 8 84 / 7 / 8 8 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 0 / 25 58 / 0 / 24 57 / 0 / 2 56 / 0 / 21 54 / 0 / 19 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 106

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 iplus ET Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus ET Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus ET Thermally toughened or Heat soaked thermally toughened AVCP characteristics in : Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K NPD 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 7 / 8 86 / 7 / 8 85 / 7 / 8 84 / 7 / 8 8 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 0 / 25 58 / 0 / 24 57 / 0 / 2 56 / 0 / 21 54 / 0 / 19 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 107

CE Marking of Coated glass - EN 1096-4:2004 iplus Twin E (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named iplus Twin E, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 iplus Twin E characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 9 / 10 82 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 29 / 22 57 / 29 / 20 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 108

Lacobel T 109

CE Marking of Heat strengthened glass - EN 186-2:2004 Lacobel T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Lacobel T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Lacobel T Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 110

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Lacobel T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Lacobel T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Lacobel T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 111

Mirox G 112

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox G Clear Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox G Clear, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox G Clear characteristics in : AVCP Systems 2 mm mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 11

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox G Clearvision Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox G Clearvision, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox G Clearvision characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 114

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox G Black Mirox Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox G Black Mirox, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox G Black Mirox characteristics in : AVCP Systems 4 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 115

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox G Bronze Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox G Bronze, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox G Bronze characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 116

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox G Green Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox G Green, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox G Green characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 117

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox G Grey Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox G Grey, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox G Grey characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 118

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox G PrivaBlue Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox G PrivaBlue, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox G PrivaBlue characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 119

Mirox MNGE 120

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox MNGE Clear Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox MNGE Clear, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox MNGE Clear characteristics in : AVCP Systems 2 mm mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 121

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox MNGE Clearvision Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox MNGE Clearvision, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox MNGE Clearvision characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 122

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox MNGE Black Mirox Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox MNGE Black Mirox, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox MNGE Black Mirox characteristics in : AVCP Systems 4 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 12

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox MNGE Bronze Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox MNGE Bronze, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox MNGE Bronze characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 124

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox MNGE Green Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox MNGE Green, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox MNGE Green characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 125

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox MNGE Grey Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox MNGE Grey, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox MNGE Grey characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 126

CE Marking of Mirrors from silver-coated float glass for internal use EN 106-2:2008 Mirox MNGE PrivaBlue Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Mirox MNGE PrivaBlue, intended to be used in buildings and construction works, following EN 106-2:2008 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Mirox MNGE PrivaBlue characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 11. U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 127

Planibel clear 128

CE Marking of Float glass - EN 572-9:2004 Planibel clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clear, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel clear characteristics in : AVCP Systems 2 mm mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 88 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 88 / 8 / 8 86 / 8 / 8 84 / 8 / 8 8 / 7 / 7 81 / 7 / 7 78 / 7 / 7 89 88 86 85 84 82 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 129

CE Marking of Float glass - EN 572-9:2004 Planibel clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clear, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel clear characteristics in : AVCP Systems 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,6 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 8 / 8 86 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 75 / 7 / 7 72 / 7 / 7 79 77 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 10

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel clear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clear Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel clear Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 88 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 84 / 8 / 8 8 / 7 / 7 81 / 7 / 7 78 / 7 / 7 75 / 7 / 7 86 85 84 82 79 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 11

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel clear Thermally toughened or Heat soaked thermally AVCP toughened characteristics in : Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 5,6 5,6 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 88 / 8 / 8 87 / 8 / 8 86 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 86 / 8 / 8 84 / 8 / 8 8 / 7 / 7 81 / 7 / 7 78 / 7 / 7 75 / 7 / 7 72 / 7 / 7 88 86 85 84 82 79 77 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 12

CE Marking of Float glass - EN 572-9:2004 Planibel Linea Azzurra (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Linea Azzurra, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Linea Azzurra characteristics in : AVCP Systems 8 mm 10 mm 12 mm 15 mm 19 mm 25 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-2) 4 (-2;-) 5 (-2;-) NPD NPD NPD 11. - U-value (EN 67) 5,7 5,6 5,6 5,4 5,4 5,2 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 8 / 8 86 / 8 / 8 85 / 8 / 8 8 / 8 / 8 81 / 7 / 7 78 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 69 / 6 / 6 66 / 6 / 6 61 / 6 / 6 56 / 6 / 6 50 / 6 / 6 78 75 72 69 65 60 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 1

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Linea Azzurra Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Linea Azzurra Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Linea Azzurra Heat strengthened characteristics in : AVCP Systems 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,7 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 8 / 8 86 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 69 / 6 / 6 78 75 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 14

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Linea Azzurra Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Linea Azzurra Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Linea Azzurra Thermally toughened or Heat soaked thermally AVCP toughened characteristics in : Systems 8 mm 10 mm 12 mm 15 mm 19 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C1 1C1 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-2) 4 (-2;-) 5 (-2;-) NPD NPD 11. - U-value (EN 67) 5,7 5,6 5,6 5,5 5,4 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 8 / 8 86 / 8 / 8 85 / 8 / 8 8 / 8 / 8 81 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 69 / 6 / 6 66 / 6 / 6 61 / 6 / 6 56 / 6 / 6 78 75 72 69 65 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 15

CE Marking of Float glass - EN 572-9:2004 Planibel Clearvision, Sunmax, Sunmax Premium (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clearvision, Sunmax, Sunmax Premium, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Clearvision, Sunmax, Sunmax Premium characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 92 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 91 91 91 90 90 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 16

CE Marking of Float glass - EN 572-9:2004 Planibel Clearvision, Sunmax, Sunmax Premium (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clearvision, Sunmax, Sunmax Premium, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Clearvision, Sunmax, Sunmax Premium characteristics in : AVCP Systems 10 mm 12 mm 15 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-2;-) 5 (-2;-) NPD 11. - U-value (EN 67) 5,6 5,6 5,5 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 90 / 8 / 8 89 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 89 / 8 / 8 86 / 8 / 8 85 / 8 / 8 89 89 87 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 17

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Clearvision, Sunmax, Sunmax Premium Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clearvision, Sunmax, Sunmax Premium, Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Clearvision, Sunmax, Sunmax Premium Heat strengthened AVCP 4 mm 5 mm 6 mm 8 mm 10 mm characteristics in : Systems 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 91 91 90 90 89 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 18

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Clearvision, Sunmax, Sunmax Premium Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clearvision, Sunmax, Sunmax Premium, Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Clearvision, Sunmax, Sunmax Premium Thermally toughened or AVCP Heat soaked thermally toughened characteristics in Systems mm 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1C 1C 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 92 / 8 / 8 91 / 8 / 8 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 91 / 8 / 8 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 91 91 91 90 90 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 19

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Clearvision, Sunmax, Sunmax Premium Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clearvision, Sunmax, Sunmax Premium, Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Clearvision, Sunmax, Sunmax Premium Thermally toughened or AVCP Heat soaked thermally toughened characteristics in Systems 10 mm 12 mm 15 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C1 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-2;-) 5 (-2;-) NPD 11. - U-value (EN 67) 5,6 5,6 5,5 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 90 / 8 / 8 89 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 89 / 8 / 8 86 / 8 / 8 85 / 8 / 8 89 89 87 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 140

CE Marking of Float glass - EN 572-9:2004 Planibel Clear Plus (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Clear Plus intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Clear Plus characteristics in : AVCP Systems 4 mm 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 A1. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 11. - U-value (EN 67) 5,8 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 91 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 141

Planibel coloured 142

CE Marking of Float glass - EN 572-9:2004 Planibel Azur (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Azur, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Azur characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 79 / 7 / 7 7 / 7 / 7 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 6 / 6 49 / 6 / 6 42 / 5 / 5 6 / 5 / 5 67 60 54 50 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 14

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Azur Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Azur Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Azur Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 79 / 7 / 7 7 / 7 / 7 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 6 / 6 49 / 6 / 6 42 / 5 / 5 6 / 5 / 5 67 60 54 50 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 144

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Azur Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Azur Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Azur Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 79 / 7 / 7 7 / 7 / 7 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 6 / 6 49 / 6 / 6 42 / 5 / 5 6 / 5 / 5 67 60 54 50 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 145

CE Marking of Float glass - EN 572-9:2004 Planibel Bronze (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Bronze, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Bronze characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 6 / 6 62 / 6 / 6 56 / 6 / 6 51 / 6 / 6 41 / 5 / 5 4 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 6 / 6 61 / 6 / 6 56 / 6 / 6 50 / 5 / 5 42 / 5 / 5 4 / 5 / 5 74 69 65 61 54 49 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 146

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Bronze Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Bronze Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Bronze Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 62 / 6 / 6 56 / 6 / 6 51 / 6 / 6 41 / 5 / 5 4 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 61 / 6 / 6 56 / 6 / 6 50 / 5 / 5 42 / 5 / 5 4 / 5 / 5 69 65 61 54 49 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 147

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Bronze Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Bronze Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Bronze Thermally toughened or Heat soaked thermally AVCP toughened characteristics in : Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 6 / 6 62 / 6 / 6 56 / 6 / 6 51 / 6 / 6 41 / 5 / 5 4 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 6 / 6 61 / 6 / 6 56 / 6 / 6 50 / 5 / 5 42 / 5 / 5 4 / 5 / 5 74 69 65 61 54 49 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 148

CE Marking of Float glass - EN 572-9:2004 Planibel Dark Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Dark Blue, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Dark Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,7 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 6 / 6 58 / 6 / 6 50 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 52 / 6 / 6 41 / 5 / 5 / 5 / 5 62 5 47 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 149

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Dark Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Dark Blue Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Dark Blue Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,7 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 6 / 6 57 / 6 / 6 50 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 52 / 6 / 6 41 / 5 / 5 / 5 / 5 62 5 47 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 150

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Dark Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Dark Blue Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Dark Blue Thermally toughened or Heat soaked thermally AVCP Systems 4 mm toughened characteristics in : 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,7 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 6 / 6 57 / 6 / 6 50 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 52 / 6 / 6 41 / 5 / 5 / 5 / 5 62 5 47 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 151

CE Marking of Float glass - EN 572-9:2004 Planibel Dark Grey (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Dark Grey, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Dark Grey characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 18 / 4 / 4 8 / 4 / 4 4/ 4 / 4 2/ 4 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 18 / 4 / 4 8 / 4 / 4 4/ 4 / 4 2/ 4 / 4 6 29 25 24 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 152

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Dark Grey Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Dark Grey Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Dark Grey Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 18 / 4 / 4 8 / 4 / 4 4/ 4 / 4 2/ 4 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 18 / 4 / 4 8 / 4 / 4 4/ 4 / 4 2/ 4 / 4 6 29 25 24 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 15

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Dark Grey Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Dark Grey Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Dark Grey Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 18 / 4 / 4 8 / 4 / 4 4/ 4 / 4 2/ 4 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 18 / 4 / 4 8 / 4 / 4 4/ 4 / 4 2/ 4 / 4 6 29 25 24 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 154

CE Marking of Float glass - EN 572-9:2004 Planibel Green (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Green, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Green characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 79 / 7 / 7 76 / 7 / 7 7 / 7 / 7 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 6 / 6 54 / 6 / 6 49 / 6 / 6 44 / 5 / 5 7 / 5 / 5 1 / 5 / 5 69 64 60 56 51 46 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 155

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Green Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Green Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Green Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 79 / 7 / 7 76 / 7 / 7 7 / 7 / 7 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 54 / 6 / 6 49 / 6 / 6 44 / 5 / 5 7 / 5 / 5 1 / 5 / 5 64 60 56 51 46 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 156

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Green Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Green Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Green Thermally toughened or Heat soaked thermally AVCP toughened characteristics in : Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 79 / 7 / 7 76 / 7 / 7 7 / 7 / 7 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 6 / 6 54 / 6 / 6 49 / 6 / 6 44 / 5 / 5 7 / 5 / 5 1 / 5 / 5 69 64 60 56 51 46 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 157

CE Marking of Float glass - EN 572-9:2004 Planibel Grey (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Grey, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Grey characteristics in : AVCP Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 5,6 5,6 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 6 / 6 / 6 57 / 6 / 6 50 / 5 / 5 44 / 5 / 5 4 / 5 / 5 27 / 5 / 5 21 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 64 / 6 / 6 58 / 6 / 6 52 / 6 / 6 46 / 5 / 5 7 / 5 / 5 0 / 5 / 5 24 / 4 / 4 72 67 62 58 51 45 41 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 158

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Grey Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Grey Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Grey Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 57 / 6 / 6 50 / 5 / 5 44 / 5 / 5 4 / 5 / 5 27 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 58 / 6 / 6 52 / 6 / 6 46 / 5 / 5 7 / 5 / 5 0 / 5 / 5 67 62 58 51 45 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 159

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Grey Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Grey Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Grey Thermally toughened or Heat soaked AVCP thermally toughened characteristics in : Systems mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,8 5,7 5,7 5,6 5,6 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 6 / 6 / 6 57 / 6 / 6 50 / 5 / 5 44 / 5 / 5 4 / 5 / 5 27 / 5 / 5 21 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 64 / 6 / 6 58 / 6 / 6 52 / 6 / 6 46 / 5 / 5 7 / 5 / 5 0 / 5 / 5 24 / 4 / 4 72 67 62 58 51 45 41 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 160

CE Marking of Float glass - EN 572-9:2004 Planibel PrivaBlue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel PrivaBlue, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel PrivaBlue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48 / 5 / 5 5 / 5 / 5 25 / 5 / 5 18 / 4 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 5 / 5 20 / 4 / 4 14 / 4 / 4 10 / 4 / 4 46 8 0 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 161

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel PrivaBlue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel PrivaBlue Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel PrivaBlue Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48 / 5 / 5 5 / 5 / 5 25 / 5 / 5 18 / 4 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 5 / 5 20 / 4 / 4 14 / 4 / 4 10 / 4 / 4 46 8 0 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 162

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel PrivaBlue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel PrivaBlue Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel PrivaBlue Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48 / 5 / 5 5 / 5 / 5 25 / 5 / 5 18 / 4 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 5 / 5 20 / 4 / 4 14 / 4 / 4 10 / 4 / 4 46 8 0 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 16

Planibel low-e 164

CE Marking of Coated glass - EN 1096-4:2004 Planibel A (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel A, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel A characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,10 0,10 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 80 / 11 / 10 79 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 68 / 12 / 11 65 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 165

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel A Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel A Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel A Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 80 / 11 / 10 79 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 68 / 12 / 11 65 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 166

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel A Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel A Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel A Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 80 / 11 / 10 79 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 68 / 12 / 11 65 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 167

CE Marking of Coated glass - EN 1096-4:2004 Planibel G (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel G, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel G characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,14 0,14 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 11 / 10 81 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 11 / 10 70 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 168

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel G Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel G Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel G Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 11 / 10 81 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 11 / 10 70 / 11 / 10 NPD NPD 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 169

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel G Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel G Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel G Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 11 / 10 81 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 11 / 10 70 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 170

CE Marking of Coated glass - EN 1096-4:2004 Planibel G fast (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel G fast, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel G fast characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,14 0,14 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 11 / 10 82 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 11 / 10 70 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 171

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel G fast Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel G fast Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel G fast Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 11 / 10 82 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 11 / 10 70 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 172

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel G fast Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel G fast Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel G fast Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 11 / 10 82 / 11 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 11 / 10 70 / 11 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 17

CE Marking of Coated glass - EN 1096-4:2004 Planibel Hortiplus N (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Hortiplus N, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Hortiplus N characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,15 0,15 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 12 / 11 81 / 12 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 12 / 11 68 / 12 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 174

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Hortiplus N Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Hortiplus N Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Hortiplus N Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 12 / 11 81 / 12 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 12 / 11 68 / 12 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 175

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Hortiplus N Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Hortiplus N Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Hortiplus N Thermally toughened or Heat soaked thermally AVCP Systems 4 mm 6 mm toughened characteristics in : 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 12 / 11 81 / 12 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 12 / 11 68 / 12 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 176

CE Marking of Coated glass - EN 1096-4:2004 AF iplus E (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named AF iplus E, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 AF iplus E characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 9 / 10 82 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 29 / 22 57 / 29 / 21 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 177

CE Marking of Coated glass - EN 1096-4:2004 Planibel AF Top N+ (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel AF Top N+, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel AF Top N+ characteristics in : AVCP Systems 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 10 / 12 80 / 10 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 56 / 1 / 25 54 / 1 / 2 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 178

CE Marking of Coated glass - EN 1096-4:2004 Planibel Top N (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Top N, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Top N characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 6 / 8 87 / 6 / 8 87 / 6 / 8 86 / 6 / 8 86 / 6 / 8 85 / 6 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 64 / 25 / 2 6 / 25 / 22 6 / 25 / 22 62 / 25 / 21 61 / 25 / 20 60 / 25 / 19 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 179

CE Marking of Coated glass - EN 1096-4:2004 Planibel Top N+ (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Top N+, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Top N+ characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 6 / 8 86 / 6 / 8 86 / 6 / 7 85 / 6 / 7 84 / 6 / 7 8 / 6 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 29 / 25 58 / 29 / 24 57 / 29 / 2 56 / 29 / 21 54 / 29 / 19 52 / 29 / 17 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 180

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Top NT Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Top NT Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Top NT Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,05 0,05 0,05 0,05 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 6 / 6 87 / 6 / 6 86 / 6 / 6 85 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 21 / 17 64 / 21 / 16 62 / 21 / 15 60 / 21 / 14 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 181

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Top NT Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Top NT Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Top NT Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,05 0,05 0,05 0,05 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 6 / 6 87 / 6 / 6 86 / 6 / 6 85 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 21 / 17 64 / 21 / 16 62 / 21 / 15 60 / 21 / 14 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 182

CE Marking of Coated glass - EN 1096-4:2004 Planibel Top N+T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Top N+T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Top N+T characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 18

CE Marking of Heat strengthened glass - EN 186-2:2004 Planibel Top N+T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Top N+T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Top N+T Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 8 / 6 87 / 8 / 6 86 / 8 / 6 85 / 8 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 65 / 25 / 22 6 / 25 / 20 61 / 25 / 19 59 / 25 / 17 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 184

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Planibel Top N+T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Top N+T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Top N+T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 8 / 6 87 / 8 / 6 86 / 8 / 6 85 / 8 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 65 / 25 / 22 6 / 25 / 20 61 / 25 / 19 59 / 25 / 17 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 185

CE Marking of Coated glass - EN 1096-4:2004 Planibel Tri (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Tri, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Tri characteristics in : AVCP Systems mm 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,07 0,07 0,07 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 8 / 8 88 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 72 / 17 / 16 71 / 17 / 15 69 / 17 / 14 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 186

CE Marking of Coated glass - EN 1096-4:2004 Planibel Tri on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Tri on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Tri on Clearvision characteristics in : AVCP Systems mm 4 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,07 0,07 0,07 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 7 / 8 89 / 7 / 8 89 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 75 / 18 / 17 75 / 18 / 17 75 / 17 / 17 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 187

Polished wired glass 188

CE Marking of Polished wired glass - EN 572-9:2004 Polished wired glass Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Polished wired glass, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Polished wired glass characteristics in : AVCP Systems 6 mm Polished wired glass J 6 mm Polished wired glass Safety J 1. Resistance to fire (EN 1501-2) 1 E0 E0 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD B 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 1 (-2;-) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 80 / 8 / 8 80 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 7 / 7 70 / 7 / 7 NDP NDP 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 189

Pyrobelite / Pyrobel 190

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobelite Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobelite, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobelite characteristics in : AVCP Systems Pyrobelite 7 Pyrobelite 7 EG Pyrobelite 9 EG 1. Resistance to fire (EN 1501-2) 1 EW0 EW0 EI20 / EW0 2. Reaction to fire (EN 1501-1), 4 A2 s1, d0 NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) B 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (0; -) 5 (-1; -2) 7 (-1;-2) 11. - U-value (EN 67) 5,7 5,5 5,5 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 8 / 8 87 / 8 / 8 86 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 65 / 7 / 7 6 / 6 / 6 76 71 70 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 191

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobelite Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobelite, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobelite characteristics in : AVCP Systems Pyrobelite 10 Pyrobelite 11 1. Resistance to fire (EN 1501-2) 1 EW0 EW0 2. Reaction to fire (EN 1501-1), 4 A2 s1, d0 NPD. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 7 (-1;-) 5 (-1; -2) 11. - U-value (EN 67) 5,6 5,5 NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 68 / 7 / 7 65 / 7 / 7 7 71 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 192

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobelite Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobelite, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobelite characteristics in : AVCP Systems Pyrobelite 12 Pyrobelite 12 EG Pyrobelite 1 1. Resistance to fire (EN 1501-2) 1 EI20 / EW60 EI20 / EW60 EW0 2. Reaction to fire (EN 1501-1), 4 A2 s1, d0 NPD A2 s1, d0. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 6 (-1; -) 8 (-1; -) 7 (-1; -2) 11. - U-value (EN 67) 5,6 5,4 5,5 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 8 / 8 85 / 8 / 8 86 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 65 / 7 / 7 58 / 6 / 6 65 / 6 / 6 71 67 7 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 19

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 8 Pyrobel 8 EG Pyrobel 16 1. Resistance to fire (EN 1501-2) 1 EI15 / EW0 EI15 / EW0 EI0 / EW60 2. Reaction to fire (EN 1501-1), 4 A2 s1, d0 NPD A2 s1, d0. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD 1B1 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1; -) 6 (-1; -) 9 (-1; -) 11. - U-value (EN 67) 5,6 5,4 5,4 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 8 / 8 86 / 8 / 8 84 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 7 / 7 62 / 6 / 6 60 / 6 / 6 74 70 67 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 194

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 16 EG Pyrobel 17 Pyrobel 17 EG 1. Resistance to fire (EN 1501-2) 1 EI0 / EW60 EI45 EI45 2. Reaction to fire (EN 1501-1), 4 NPD A2 s1, d0 NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 9 (-1; -) 7 (-1; -) 8 (0; -) 11. - U-value (EN 67) 5,2 5,4 5,2 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 7 / 7 84 / 8 / 8 84 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 54 / 6 / 6 61 / 6 / 6 56 / 6 / 6 6 69 65 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 195

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 17N Pyrobel 17N EG Pyrobel 21 1. Resistance to fire (EN 1501-2) 1 EI45 / EW60 EI45 / EW60 EI45 / EW60 2. Reaction to fire (EN 1501-1), 4 A2 s1, d0 NPD A2 s1, d0. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 9 (0; -) 40 (-1; -) 8 (0; -) 11. - U-value (EN 67) 5,4 5,2 5, NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 8 / 8 85 / 8 / 8 82 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 7 / 7 60 / 7 / 7 59 / 6 / 6 72 68 64 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 196

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 21 EG Pyrobel 2 Pyrobel 2 EG 1. Resistance to fire (EN 1501-2) 1 EI45 / EW60 EI60 EI60 2. Reaction to fire (EN 1501-1), 4 NPD A2 s1, d0 NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 40 (-1; -) 40 (-1; -) 4 (-1; -4) 11. - U-value (EN 67) 5,1 5,2 5,0 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 81 / 7 / 7 80 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 54 / 6 / 6 5 / 6 / 6 48 / 6 / 6 61 NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 197

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 25 Pyrobel 25 EG Pyrobel 0 1. Resistance to fire (EN 1501-2) 1 EI60 EI60 EI90 2. Reaction to fire (EN 1501-1), 4 A2 s1, d0 NPD A2 s1, d0. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 40 (-1; -) 4 (-1; -4) 42 (-1; -4) 11. - U-value (EN 67) 5,2 5,0 5,1 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 80 / 7 / 7 8 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5 / 6 / 6 48 / 6 / 6 59 / 7 / 7 62 59 66 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 198

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 0 EG Pyrobel 5 Pyrobel 5 EG 1. Resistance to fire (EN 1501-2) 1 EI90 EI90 EI90 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1; -4) 41 (-1; -4) 42 (-1; -4) 11. - U-value (EN 67) 4,9 4,9 4,8 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 8 / 8 79 / 7 / 7 77 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5 / 6 / 6 49 / 6 / 6 46 / 6 / 6 6 59 57 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 199

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 5 Pyrobel 5 EG Pyrobel 5N 1. Resistance to fire (EN 1501-2) 1 EI120 EI120 EI120 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 45 (-1; -4) 46 (-2; -5) 48 (-2; -7) 11. - U-value (EN 67) 4,5 4, 4,5 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 7 / 7 71 / 7 / 7 75 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 5 / 5 8 / 5 / 5 42 / 5 / 5 5 51 55 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 200

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 5N EG 1. Resistance to fire (EN 1501-2) 1 EI120 2. Reaction to fire (EN 1501-1), 4 NPD. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 49 (-2; -7) 11. - U-value (EN 67) 4,4 NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 7 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 5 / 5 5 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 201

CE Marking of Pyrobel EN 14449:2005 + AC:2005 Pyrobel Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyrobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyrobel characteristics in : AVCP Systems Pyrobel 19H Pyrobel 2H Pyrobel 28H 1. Resistance to fire (EN 1501-2) 1 EI0 EI45 EI60 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 8 (-1; -) 9 (0; -) 41 (0;-) 11. - U-value (EN 67) 5,2 5,0 4,9 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 80 / 7 / 7 78 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5 / 6 / 6 49 / 6 / 6 47 / 6 / 6 6 60 58 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 202

Pyropane 20

CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Pyropane 100 Pyropane 110 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyropane, intended to be used in buildings and construction works, following EN 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyropane characteristics in : AVCP Systems Pyropane 100 Pyropane 110 1. Resistance to fire (EN 1501-2) 1 E0 E0 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2; -) 1 (-2; -) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 89 / 8 / 8 NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 81 / 7 / 7 NPD NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 204

CE Marking of Static Smoke Barrier - EN 12101-1 Pyropane 100 SB 0 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the static smoke barrier product named Pyropane, intended to be used in buildings and construction works, following EN 12101-1 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyropane characteristics in : AVCP Systems Pyropane 100 SB0 1. Resistance to fire classification 1 DH 0 2. Response delay 4 NPD. Openings, gaps and perimeter spaces : Gap head Gap edge Gap joint Area head Area edge Area joint 4 10 mm 11 mm 6 mm NPD NPD NPD 4. Maximum barrier permeability 4 NPD 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 205

CE Marking of Insulating glass unit EN 1279-5:2005 + A2:2010 Pyropane 151-70 ; 151-70/100 ; 152-70 ; 201 ; 201/100 ; 202 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyropane, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyropane characteristics in : AVCP Systems Pyropane 151-70 Pyropane 151-70/100 Pyropane 152-70 Pyropane 201 Pyropane 201/100 Pyropane 202 1. Resistance to fire (EN 1501-2) 1 E0 EW0 E0 EW0 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) For 12 characteristics, see www.yourglass.com\ce For 12 characteristics, see www.yourglass.com\ce 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 206

CE Marking of Insulating glass unit EN 1279-5:2005 + A2:2010 Pyropane 211-44 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyropane, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyropane characteristics in : AVCP Systems Pyropane 211 44 1. Resistance to fire (EN 1501-2) 1 E0/60 EW0/60 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) For 12 characteristics, see www.yourglass.com\ce 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 207

CE Marking of Insulating glass unit EN 1279-5:2005 + A2:2010 Pyropane 21-28 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyropane, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyropane characteristics in : AVCP Systems Pyropane 21-28 1. Resistance to fire (EN 1501-2) 1 E0/60 EW0/60 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) For 12 characteristics, see www.yourglass.com\ce 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 208

CE Marking of Insulating glass unit EN 1279-5:2005 + A2:2010 Pyropane 221-7 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyropane, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyropane characteristics in : AVCP Systems Pyropane 221-7 1. Resistance to fire (EN 1501-2) 1 E0 EW0 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) For 12 characteristics, see www.yourglass.com\ce 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 209

CE Marking of Insulating glass unit EN 1279-5:2005 + A2:2010 Pyropane 241-60 Pyropane 204 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Pyropane, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Pyropane characteristics in : AVCP Systems Pyropane 241-60 Pyropane 204 1. Resistance to fire (EN 1501-2) 1 E0 EW0 E0 EW0 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) For 12 characteristics, see www.yourglass.com\ce For 12 characteristics, see www.yourglass.com\ce 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 210

Solar patterned glass 211

CE Marking of Patterned glass - EN 572-9:2004 Astralite (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Astralite, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Astralite characteristics in : AVCP Systems,2 mm 4 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 90 / 8 / 8 91 91 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 212

CE Marking of Thermally toughened glass - EN 12150-2:2004 Astralite Thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Astralite Thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Astralite Thermally toughened characteristics in : AVCP Systems,2 mm 4 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 91 / 8 / 8 91 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 90 / 8 / 8 91 91 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 21

CE Marking of Patterned glass - EN 572-9:2004 Solatex (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Solatex, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Solatex characteristics in : AVCP Systems,2 mm 4 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 92 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 91 / 8 / 8 91 91 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 214

CE Marking of Thermally toughened glass - EN 12150-2:2004 Solatex Thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Solatex Thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Solatex Thermally toughened characteristics in : AVCP Systems,2 mm 4 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 92 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 91 / 8 / 8 91 91 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 215

CE Marking of Patterned glass - EN 572-9:2004 Solite (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Solite, intended to be used in buildings and construction works, following EN 572-9:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Solite characteristics in : AVCP Systems,2 mm 4 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 92 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 91 / 8 / 8 91 91 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 216

CE Marking of Thermally toughened glass - EN 12150-2:2004 Solite Thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Solite Thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Solite Thermally toughened characteristics in : AVCP Systems,2 mm 4 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 11. - U-value (EN 67) 5,8 5,8 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 92 / 8 / 8 92 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 91 / 8 / 8 91 / 8 / 8 91 91 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 217

Stopray 218

CE Marking of Coated glass - EN 1096-4:2004 Stopray Indigo 48T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Indigo 48T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Indigo 48T characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 219

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Indigo 48T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Indigo 48T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Indigo 48T Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 5 / 5 / 6 46 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 8 / 8 2 / 8 / 6 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 220

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Indigo 48T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.620 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Indigo 48T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Indigo 48T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 5 / 5 / 6 46 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 8 / 8 2 / 8 / 6 14. Durability 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 221

CE Marking of Coated glass - EN 1096-4:2004 Stopray Lime 61T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Lime 61T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Lime 61T characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 222

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Lime 61T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Lime 61T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Lime 61T Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 8 / 9 0 / 8 / 7 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 22

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Lime 61T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Lime 61T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Lime 61T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 6 / 6 6 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 8 / 9 0 / 8 / 7 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 224

CE Marking of Coated glass - EN 1096-4:2004 Stopray Silver (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Silver, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Silver characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 47 / 42 / 46 47 / 42 / 46 46 / 42 / 45 46 / 42 / 44 45 / 42 / 44 45 / 42 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 27 / 61 / 52 27 / 61 / 50 27 / 61 / 48 26 / 60 / 44 25 / 60 / 41 25 / 60 / 9 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 225

CE Marking of Coated glass - EN 1096-4:2004 Stopray Silver Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Silver, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Silver characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 47 / 42 / 46 47 / 42 / 46 46 / 42 / 45 46 / 42 / 44 45 / 42 / 44 45 / 42 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 27 / 61 / 52 27 / 61 / 50 27 / 61 / 48 26 / 60 / 44 25 / 60 / 41 25 / 60 / 9 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 226

CE Marking of Coated glass - EN 1096-4:2004 Stopray Silver Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Silver, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Silver characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 47 / 42 / 46 47 / 42 / 46 46 / 42 / 45 46 / 42 / 44 45 / 42 / 44 45 / 42 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 27 / 61 / 52 27 / 61 / 50 27 / 61 / 48 26 / 60 / 44 25 / 60 / 41 25 / 60 / 9 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 227

CE Marking of Coated glass - EN 1096-4:2004 Stopray Silver on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Silver on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Silver on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48/42/48 48/42/48 48/42/48 48/42/48 47/42/47 47/42/47 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 29/61/6 29/61/62 29/61/61 29/61/60 28/61/58 28/61/57 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 228

CE Marking of Coated glass - EN 1096-4:2004 Stopray Silver on Clearvision Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Silver on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Silver on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48/42/48 48/42/48 48/42/48 48/42/48 47/42/47 47/42/47 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 29/61/6 29/61/62 29/61/61 29/61/60 28/61/58 28/61/57 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 229

CE Marking of Coated glass - EN 1096-4:2004 Stopray Silver on Clearvision Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Silver on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Silver on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48/42/48 48/42/48 48/42/48 48/42/48 47/42/47 47/42/47 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 29/61/6 29/61/62 29/61/61 29/61/60 28/61/58 28/61/57 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 20

CE Marking of Coated glass - EN 1096-4:2004 Stopray Smart 0/20 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Smart 0/20, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Smart 0/20 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 9 / 28 2 / 9 / 27 2 / 9 / 26 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 20 / 1 / 0 19 / 1 / 28 18 / 1 / 25 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 21

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Smart 0/20 Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Smart 0/20 Heat strengthened, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Smart 0/20 Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 9 / 28 2 / 9 / 27 2 / 9 / 26 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 20 / 1 / 0 19 / 1 / 28 18 / 1 / 25 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 22

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Smart 0/20 Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Smart 0/20 Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Smart 0/20 Thermally toughened or Heat soaked thermally AVCP Systems toughened characteristics in : 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 9 / 28 2 / 9 / 27 2 / 9 / 26 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 20 / 1 / 0 19 / 1 / 28 18 / 1 / 25 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 2

CE Marking of Coated glass - EN 1096-4:2004 Stopray Smart 51/ (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Smart 51/, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Smart 51/ characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 12 / 2 55 / 12 / 22 54 / 11 / 22 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 7 / 0 2 / 7 / 27 1 / 7 / 24 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 24

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Smart 51/ Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Smart 51/ Heat strengthened, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Smart 51/ Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 12 / 2 55 / 12 / 22 54 / 11 / 22 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 7 / 0 2 / 7 / 27 1 / 7 / 24 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 25

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Smart 51/ Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Smart 51/ Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Smart 51/ Thermally toughened or Heat soaked thermally AVCP Systems toughened characteristics in : 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 12 / 2 55 / 12 / 22 54 / 11 / 22 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 7 / 0 2 / 7 / 27 1 / 7 / 24 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 26

CE Marking of Coated glass - EN 1096-4:2004 Stopray Titanium 7T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Titanium 7T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Titanium 7T characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 27

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Titanium 7T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Titanium 7T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Titanium 7T Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 41 / 5 / 5 2 / 4 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 25 / 8 / 1 20 / 7 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 28

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Titanium 7T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Titanium 7T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Titanium 7T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 41 / 5 / 5 2 / 4 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 25 / 8 / 1 20 / 7 / 10 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 29

CE Marking of Coated glass - EN 1096-4:2004 Stopray Vision-6T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-6T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-6T characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 240

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Vision-6T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-6T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-6T Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 9 / 1 / 29 8 / 1 / 29 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 55 / 41 20 / 56 / 7 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 241

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Vision-6T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-6T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-6T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) NPD NPD 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 9 / 1 / 29 8 / 1 / 29 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 55 / 41 20 / 56 / 7 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 242

CE Marking of Coated glass - EN 1096-4:2004 Stopray Vision-50 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-50, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-50 characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 55 / 17 / 17 55 / 17 / 17 55 / 17 / 16 54 / 17 / 16 5 / 17 / 16 5 / 17 / 16 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 29 / 4 / 5 29 / 4 / 28 / 4 / 2 28 / 4 / 29 27 / 4 / 27 27 / 4 / 25 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 24

CE Marking of Coated glass - EN 1096-4:2004 Stopray Vision-50 on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-50 on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-50 on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56/17/17 56/17/17 56/17/17 56/17/17 56/17/17 56/17/17 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0/4/42 0/4/41 0/4/41 0/4/40 0/4/9 0/4/8 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 244

CE Marking of Coated glass - EN 1096-4:2004 Stopray Vision-50T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-50T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-50T characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 245

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Vision-50T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-50T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-50T Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 55 / 16 / 15 55 / 16 / 15 54 / 16 / 15 5 / 16 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 44 / 5 1 / 44 / 1 0 / 44 / 29 29 / 44 / 26 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 246

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Vision-50T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-50T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-50T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 55 / 16 / 15 55 / 16 / 15 54 / 16 / 15 5 / 16 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 44 / 5 1 / 44 / 1 0 / 44 / 29 29 / 44 / 26 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 247

CE Marking of Coated glass - EN 1096-4:2004 Stopray Vision-60 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-60, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-60 characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 67 / 12 / 12 66 / 12 / 11 65 / 12 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 6 / 8 / 29 5 / 8 / 26 4 / 8 / 24 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 248

CE Marking of Coated glass - EN 1096-4:2004 Stopray Vision-60T (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-60T, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-60T characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 249

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopray Vision-60T Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-60T Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-60T Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 66 / 15 / 11 66 / 15 / 11 65 / 15 / 11 64 / 15 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 9 / 41 / 0 8 / 41 / 26 7 / 41 / 2 6 / 41 / 21 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 250

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopray Vision-60T Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Vision-60T Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Vision-60T Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 66 / 15 / 11 66 / 15 / 11 65 / 15 / 11 64 / 15 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 9 / 41 / 0 8 / 41 / 26 7 / 41 / 2 6 / 41 / 21 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 251

CE Marking of Coated glass - EN 1096-4:2004 Stopray Ultra-50 on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Ultra-50 on Cleavision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Ultra-50 on Clearvision characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 1C1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 54 / 7 / 16 54 / 7 / 16 54 / 7 / 16 54 / 7 / 16 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 24 / 47 / 46 24 / 47 / 45 2 / 47 / 44 2 / 47 / 4 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 252

CE Marking of Coated glass - EN 1096-4:2004 Stopray Ultra-60 (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Ultra-60, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Ultra-60 characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 1C1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 67 / 8 / 9 66 / 8 / 9 65 / 8 / 9 64 / 8 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 29 / 48 / 8 29 / 48 / 4 29 / 48 / 1 28 / 48 / 28 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 25

CE Marking of Coated glass - EN 1096-4:2004 Stopray Aquamarine (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Aquamarine, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Aquamarine characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 8 / 10 69 / 8 / 10 66 / 8 / 9 61 / 7 / 9 56 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 9 / 0 / 11 6 / 0 / 10 / 0 / 8 28 / 0 / 7 24 / 0 / 6 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 254

CE Marking of Coated glass - EN 1096-4:2004 Stopray Aquamarine Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Aquamarine, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Aquamarine characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 8 / 10 69 / 8 / 10 66 / 8 / 9 61 / 7 / 9 56 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 9 / 0 / 11 6 / 0 / 10 / 0 / 8 28 / 0 / 7 24 / 0 / 6 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 255

CE Marking of Coated glass - EN 1096-4:2004 Stopray Aquamarine Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Aquamarine, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Aquamarine characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 8 / 10 69 / 8 / 10 66 / 8 / 9 61 / 7 / 9 56 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 9 / 0 / 11 6 / 0 / 10 / 0 / 8 28 / 0 / 7 24 / 0 / 6 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 256

CE Marking of Coated glass - EN 1096-4:2004 Stopray Blue Night (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Blue Night, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Blue Night characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 25 / 41 / 16 18 / 41 / 11 1 / 41 / 8 10 / 41 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 60 / 12 9 / 60 / 8 6 / 60 / 6 5 / 60 / 6 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 257

CE Marking of Coated glass - EN 1096-4:2004 Stopray Blue Night Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Blue Night, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Blue Night characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 25 / 41 / 16 18 / 41 / 11 1 / 41 / 8 10 / 41 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 60 / 12 9 / 60 / 8 6 / 60 / 6 5 / 60 / 6 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 258

CE Marking of Coated glass - EN 1096-4:2004 Stopray Blue Night Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Blue Night, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Blue Night characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 25 / 41 / 16 18 / 41 / 11 1 / 41 / 8 10 / 41 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 60 / 12 9 / 60 / 8 6 / 60 / 6 5 / 60 / 6 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 259

CE Marking of Coated glass - EN 1096-4:2004 Stopray Bright Sepia (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Bright Sepia, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Bright Sepia characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 41 / 24 0 / 41 / 20 27 / 41 / 17 22 / 41 / 1 18 / 41 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 20 / 60 / 1 18 / 60 / 26 16 / 60 / 22 14 / 60 / 17 11 / 60 / 1 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 260

CE Marking of Coated glass - EN 1096-4:2004 Stopray Bright Sepia Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Bright Sepia, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Bright Sepia characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 41 / 24 0 / 41 / 20 27 / 41 / 17 22 / 41 / 1 18 / 41 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 20 / 60 / 1 18 / 60 / 26 16 / 60 / 22 14 / 60 / 17 11 / 60 / 1 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 261

CE Marking of Coated glass - EN 1096-4:2004 Stopray Bright Sepia Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Bright Sepia, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Bright Sepia characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 41 / 24 0 / 41 / 20 27 / 41 / 17 22 / 41 / 1 18 / 41 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 20 / 60 / 1 18 / 60 / 26 16 / 60 / 22 14 / 60 / 17 11 / 60 / 1 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 262

CE Marking of Coated glass - EN 1096-4:2004 Stopray Carat (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Carat, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Carat characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 58 / 9 / 11 58 / 9 / 11 58 / 9 / 11 57 / 9 / 11 56 / 9 / 11 56 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 45 / 28 28 / 45 / 27 27 / 45 / 27 27 / 45 / 2 26 / 45 / 21 26 / 45 / 20 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 26

CE Marking of Coated glass - EN 1096-4:2004 Stopray Carat Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Carat, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Carat characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 58 / 9 / 11 58 / 9 / 11 58 / 9 / 11 57 / 9 / 11 56 / 9 / 11 56 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 45 / 28 28 / 45 / 27 27 / 45 / 27 27 / 45 / 2 26 / 45 / 21 26 / 45 / 20 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 264

CE Marking of Coated glass - EN 1096-4:2004 Stopray Carat Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Carat, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Carat characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 58 / 9 / 11 58 / 9 / 11 58 / 9 / 11 57 / 9 / 11 56 / 9 / 11 56 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 45 / 28 28 / 45 / 27 27 / 45 / 27 27 / 45 / 2 26 / 45 / 21 26 / 45 / 20 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 265

CE Marking of Coated glass - EN 1096-4:2004 Stopray Chroma (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Chroma, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Chroma characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 51 / 7 / 7 45 / 6 / 6 40 / 6 / 6 1 / 6 / 5 24 / 6 / 5 19 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 0 / 16 4 / 0 / 14 0 / 0 / 12 24 / 29 / 9 19 / 29 / 8 15 / 29 / 7 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 266

CE Marking of Coated glass - EN 1096-4:2004 Stopray Chroma Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Chroma, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Chroma characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 51 / 7 / 7 45 / 6 / 6 40 / 6 / 6 1 / 6 / 5 24 / 6 / 5 19 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 0 / 16 4 / 0 / 14 0 / 0 / 12 24 / 29 / 9 19 / 29 / 8 15 / 29 / 7 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 267

CE Marking of Coated glass - EN 1096-4:2004 Stopray Chroma Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Chroma, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Chroma characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 51 / 7 / 7 45 / 6 / 6 40 / 6 / 6 1 / 6 / 5 24 / 6 / 5 19 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 0 / 16 4 / 0 / 14 0 / 0 / 12 24 / 29 / 9 19 / 29 / 8 15 / 29 / 7 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 268

CE Marking of Coated glass - EN 1096-4:2004 Stopray Cristal (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Cristal, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Cristal characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,06 0,06 0,06 0,06 0,06 0,06 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 69 / 6 / 14 68 / 6 / 14 68 / 6 / 14 67 / 6 / 14 67 / 6 / 14 66 / 6 / 1 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 45 / 1 / 28 44 / 1 / 27 44 / 1 / 26 42 / 1 / 24 41 / 1 / 2 40 / 0 / 21 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 269

CE Marking of Coated glass - EN 1096-4:2004 Stopray Cristal Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Cristal, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Cristal characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,06 0,06 0,06 0,06 0,06 0,06 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 69 / 6 / 14 68 / 6 / 14 68 / 6 / 14 67 / 6 / 14 67 / 6 / 14 66 / 6 / 1 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 45 / 1 / 28 44 / 1 / 27 44 / 1 / 26 42 / 1 / 24 41 / 1 / 2 40 / 0 / 21 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 270

CE Marking of Coated glass - EN 1096-4:2004 Stopray Cristal Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Cristal, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Cristal characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,06 0,06 0,06 0,06 0,06 0,06 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 69 / 6 / 14 68 / 6 / 14 68 / 6 / 14 67 / 6 / 14 67 / 6 / 14 66 / 6 / 1 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 45 / 1 / 28 44 / 1 / 27 44 / 1 / 26 42 / 1 / 24 41 / 1 / 2 40 / 0 / 21 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 271

CE Marking of Coated glass - EN 1096-4:2004 Stopray Deep Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Deep Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Deep Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 6 / 12 / 6 26 / 11 / 5 19 / 11 / 5 14 / 11 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 17 / 41 / 7 12 / 41 / 5 9 / 41 / 5 7 / 41 / 5 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 272

CE Marking of Coated glass - EN 1096-4:2004 Stopray Deep Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Deep Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Deep Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 6 / 12 / 6 26 / 11 / 5 19 / 11 / 5 14 / 11 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 17 / 41 / 7 12 / 41 / 5 9 / 41 / 5 7 / 41 / 5 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 27

CE Marking of Coated glass - EN 1096-4:2004 Stopray Deep Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Deep Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Deep Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 6 / 12 / 6 26 / 11 / 5 19 / 11 / 5 14 / 11 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 17 / 41 / 7 12 / 41 / 5 9 / 41 / 5 7 / 41 / 5 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 274

CE Marking of Coated glass - EN 1096-4:2004 Stopray Elite (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Elite, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Elite characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 75 / 9 / 9 75 / 9 / 9 75 / 9 / 9 74 / 9 / 9 7 / 9 / 9 72 / 9 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 42 / 8 / 0 42 / 8 / 29 42 / 8 / 28 41 / 8 / 26 40 / 8 / 2 9 / 8 / 22 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 275

CE Marking of Coated glass - EN 1096-4:2004 Stopray Elite Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Elite, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Elite characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 75 / 9 / 9 75 / 9 / 9 75 / 9 / 9 74 / 9 / 9 7 / 9 / 9 72 / 9 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 42 / 8 / 0 42 / 8 / 29 42 / 8 / 28 41 / 8 / 26 40 / 8 / 2 9 / 8 / 22 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 276

CE Marking of Coated glass - EN 1096-4:2004 Stopray Elite Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Elite, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Elite characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 75 / 9 / 9 75 / 9 / 9 75 / 9 / 9 74 / 9 / 9 7 / 9 / 9 72 / 9 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 42 / 8 / 0 42 / 8 / 29 42 / 8 / 28 41 / 8 / 26 40 / 8 / 2 9 / 8 / 22 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 277

CE Marking of Coated glass - EN 1096-4:2004 Stopray Elite on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Elite on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Elite on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 9 / 10 77 / 9 / 10 77 / 9 / 10 77 / 9 / 10 76 / 9 / 10 76 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 8 / 5 44 / 8 / 5 44 / 8 / 5 44 / 8 / 4 44 / 8 / 44 / 8 / NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 278

CE Marking of Coated glass - EN 1096-4:2004 Stopray Elite on Clearvision Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Elite on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Elite on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 9 / 10 77 / 9 / 10 77 / 9 / 10 77 / 9 / 10 76 / 9 / 10 76 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 8 / 5 44 / 8 / 5 44 / 8 / 5 44 / 8 / 4 44 / 8 / 44 / 8 / NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 279

CE Marking of Coated glass - EN 1096-4:2004 Stopray Elite on Clearvision Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Elite on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Elite on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 9 / 10 77 / 9 / 10 77 / 9 / 10 77 / 9 / 10 76 / 9 / 10 76 / 9 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 8 / 5 44 / 8 / 5 44 / 8 / 5 44 / 8 / 4 44 / 8 / 44 / 8 / NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 280

CE Marking of Coated glass - EN 1096-4:2004 Stopray Emeralda (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Emeralda, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Emeralda characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 42 / 6 41 / 42 / 4 40 / 41 / 2 7 / 41 / 28 4 / 41 / 25 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 22 / 61 / 27 21 / 61 / 2 19 / 60 / 20 17 / 60 / 16 15 / 60 / 14 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 281

CE Marking of Coated glass - EN 1096-4:2004 Stopray Emeralda Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Emeralda, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Emeralda characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 42 / 6 41 / 42 / 4 40 / 41 / 2 7 / 41 / 28 4 / 41 / 25 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 22 / 61 / 27 21 / 61 / 2 19 / 60 / 20 17 / 60 / 16 15 / 60 / 14 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 282

CE Marking of Coated glass - EN 1096-4:2004 Stopray Emeralda Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Emeralda, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Emeralda characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 42 / 6 41 / 42 / 4 40 / 41 / 2 7 / 41 / 28 4 / 41 / 25 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 22 / 61 / 27 21 / 61 / 2 19 / 60 / 20 17 / 60 / 16 15 / 60 / 14 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 28

CE Marking of Coated glass - EN 1096-4:2004 Stopray Galaxy (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Galaxy, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Galaxy characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 45 / 14 / 15 44 / 14 / 15 44 / 14 / 15 44 / 14 / 14 44 / 14 / 14 4 / 14 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 2 20 / 4 / 1 20 / 4 / 29 20 / 4 / 27 19 / 4 / 25 19 / 4 / 2 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 284

CE Marking of Coated glass - EN 1096-4:2004 Stopray Galaxy Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Galaxy, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Galaxy characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 45 / 14 / 15 44 / 14 / 15 44 / 14 / 15 44 / 14 / 14 44 / 14 / 14 4 / 14 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 2 20 / 4 / 1 20 / 4 / 29 20 / 4 / 27 19 / 4 / 25 19 / 4 / 2 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 285

CE Marking of Coated glass - EN 1096-4:2004 Stopray Galaxy Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Galaxy, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Galaxy characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 45 / 14 / 15 44 / 14 / 15 44 / 14 / 15 44 / 14 / 14 44 / 14 / 14 4 / 14 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 2 20 / 4 / 1 20 / 4 / 29 20 / 4 / 27 19 / 4 / 25 19 / 4 / 2 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 286

CE Marking of Coated glass - EN 1096-4:2004 Stopray Galaxy on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Galaxy on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Galaxy on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 9 21 / 4 / 8 21 / 4 / 8 21 / 4 / 7 21 / 4 / 6 21 / 4 / 5 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 287

CE Marking of Coated glass - EN 1096-4:2004 Stopray Galaxy on Clearvision Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Galaxy on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Galaxy on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 9 21 / 4 / 8 21 / 4 / 8 21 / 4 / 7 21 / 4 / 6 21 / 4 / 5 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 288

CE Marking of Coated glass - EN 1096-4:2004 Stopray Galaxy on Clearvision Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Galaxy on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Galaxy on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 45 / 14 / 15 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 9 21 / 4 / 8 21 / 4 / 8 21 / 4 / 7 21 / 4 / 6 21 / 4 / 5 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 289

CE Marking of Coated glass - EN 1096-4:2004 Stopray Granit Grey (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Granit Grey, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Granit Grey characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 0 / 41 / 20 27 / 41 / 17 2 / 41 / 14 18 / 41 / 10 14 / 41 / 8 11 / 41 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 19 / 60 / 29 17 / 60 / 24 15 / 60 / 20 12 / 60 / 14 10 / 60 / 11 8 / 60 / 9 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 290

CE Marking of Coated glass - EN 1096-4:2004 Stopray Granit Grey Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Granit Grey, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Granit Grey characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 0 / 41 / 20 27 / 41 / 17 2 / 41 / 14 18 / 41 / 10 14 / 41 / 8 11 / 41 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 19 / 60 / 29 17 / 60 / 24 15 / 60 / 20 12 / 60 / 14 10 / 60 / 11 8 / 60 / 9 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 291

CE Marking of Coated glass - EN 1096-4:2004 Stopray Granit Grey Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Granit Grey, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Granit Grey characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 0 / 41 / 20 27 / 41 / 17 2 / 41 / 14 18 / 41 / 10 14 / 41 / 8 11 / 41 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 19 / 60 / 29 17 / 60 / 24 15 / 60 / 20 12 / 60 / 14 10 / 60 / 11 8 / 60 / 9 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 292

CE Marking of Coated glass - EN 1096-4:2004 Stopray Marine Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Marine Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Marine Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 6 / 7 1 / 6 / 6 2 / 6 / 5 17 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2 / 29 / 7 16 / 29 / 5 11 / 29 / 5 8 / 29 / 5 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 29

CE Marking of Coated glass - EN 1096-4:2004 Stopray Marine Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Marine Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Marine Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 6 / 7 1 / 6 / 6 2 / 6 / 5 17 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2 / 29 / 7 16 / 29 / 5 11 / 29 / 5 8 / 29 / 5 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 294

CE Marking of Coated glass - EN 1096-4:2004 Stopray Marine Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Marine Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Marine Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 6 / 7 1 / 6 / 6 2 / 6 / 5 17 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2 / 29 / 7 16 / 29 / 5 11 / 29 / 5 8 / 29 / 5 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 295

CE Marking of Coated glass - EN 1096-4:2004 Stopray Metal Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Metal Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Metal Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 8 / 10 67 / 8 / 9 62 / 7 / 9 58 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 42 / 0 / 1 6 / 0 / 10 2 / 0 / 8 28 / 0 / 7 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 296

CE Marking of Coated glass - EN 1096-4:2004 Stopray Metal Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Metal Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Metal Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 8 / 10 67 / 8 / 9 62 / 7 / 9 58 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 42 / 0 / 1 6 / 0 / 10 2 / 0 / 8 28 / 0 / 7 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 297

CE Marking of Coated glass - EN 1096-4:2004 Stopray Metal Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Metal Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Metal Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 72 / 8 / 10 67 / 8 / 9 62 / 7 / 9 58 / 7 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 42 / 0 / 1 6 / 0 / 10 2 / 0 / 8 28 / 0 / 7 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 298

CE Marking of Coated glass - EN 1096-4:2004 Stopray Neutral (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Neutral, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Neutral characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,10 0,10 0,10 0,10 0,10 0,10 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 24 / 10 56 / 24 / 10 55 / 24 / 10 55 / 24 / 10 54 / 24 / 9 5 / 24 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 1 / 18 4 / 1 / 17 42 / 1 / 16 40 / 1 / 15 9 / 1 / 14 8 / 1 / 1 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 299

CE Marking of Coated glass - EN 1096-4:2004 Stopray Neutral Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Neutral, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Neutral characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,10 0,10 0,10 0,10 0,10 0,10 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 24 / 10 56 / 24 / 10 55 / 24 / 10 55 / 24 / 10 54 / 24 / 9 5 / 24 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 1 / 18 4 / 1 / 17 42 / 1 / 16 40 / 1 / 15 9 / 1 / 14 8 / 1 / 1 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 00

CE Marking of Coated glass - EN 1096-4:2004 Stopray Neutral Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Neutral, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Neutral characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,10 0,10 0,10 0,10 0,10 0,10 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 24 / 10 56 / 24 / 10 55 / 24 / 10 55 / 24 / 10 54 / 24 / 9 5 / 24 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 1 / 18 4 / 1 / 17 42 / 1 / 16 40 / 1 / 15 9 / 1 / 14 8 / 1 / 1 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 01

CE Marking of Coated glass - EN 1096-4:2004 Stopray Oasis (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Oasis, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Oasis characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 66 / 9 / 8 64 / 9 / 8 61 / 8 / 8 57 / 8 / 7 5 / 8 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 7 / 11 0 / 7 / 9 28 / 7 / 8 25 / 7 / 6 22 / 7 / 6 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 02

CE Marking of Coated glass - EN 1096-4:2004 Stopray Oasis Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Oasis, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Oasis characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 66 / 9 / 8 64 / 9 / 8 61 / 8 / 8 57 / 8 / 7 5 / 8 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 7 / 11 0 / 7 / 9 28 / 7 / 8 25 / 7 / 6 22 / 7 / 6 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 0

CE Marking of Coated glass - EN 1096-4:2004 Stopray Oasis Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Oasis, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Oasis characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 66 / 9 / 8 64 / 9 / 8 61 / 8 / 8 57 / 8 / 7 5 / 8 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 7 / 11 0 / 7 / 9 28 / 7 / 8 25 / 7 / 6 22 / 7 / 6 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 04

CE Marking of Coated glass - EN 1096-4:2004 Stopray Quartz (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Quartz, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Quartz characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48 / 6 / 6 42 / 6 / 5 7 / 6 / 5 28 / 6 / 5 22 / 6 / 5 17 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 7 / 14 24 / 7 / 12 21 / 7 / 10 16 / 7 / 7 1 / 7 / 6 10 / 7 / 6 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 05

CE Marking of Coated glass - EN 1096-4:2004 Stopray Quartz Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Quartz, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Quartz characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48 / 6 / 6 42 / 6 / 5 7 / 6 / 5 28 / 6 / 5 22 / 6 / 5 17 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 7 / 14 24 / 7 / 12 21 / 7 / 10 16 / 7 / 7 1 / 7 / 6 10 / 7 / 6 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 06

CE Marking of Coated glass - EN 1096-4:2004 Stopray Quartz Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Quartz, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Quartz characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) 1C 1C 1C2 1C2 1C1 1C1 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 48 / 6 / 6 42 / 6 / 5 7 / 6 / 5 28 / 6 / 5 22 / 6 / 5 17 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 7 / 14 24 / 7 / 12 21 / 7 / 10 16 / 7 / 7 1 / 7 / 6 10 / 7 / 6 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 07

CE Marking of Coated glass - EN 1096-4:2004 Stopray Reflex Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Reflex Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Reflex Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 42 / 6 40 / 41 / 2 7 / 41 / 28 4 / 41 / 25 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 22 / 61 / 28 20 / 61 / 21 18 / 60 / 18 16 / 60 / 15 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 08

CE Marking of Coated glass - EN 1096-4:2004 Stopray Reflex Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Reflex Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Reflex Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 42 / 6 40 / 41 / 2 7 / 41 / 28 4 / 41 / 25 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 22 / 61 / 28 20 / 61 / 21 18 / 60 / 18 16 / 60 / 15 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 09

CE Marking of Coated glass - EN 1096-4:2004 Stopray Reflex Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Reflex Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Reflex Blue characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 42 / 6 40 / 41 / 2 7 / 41 / 28 4 / 41 / 25 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 22 / 61 / 28 20 / 61 / 21 18 / 60 / 18 16 / 60 / 15 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 10

CE Marking of Coated glass - EN 1096-4:2004 Stopray Safir (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Safir, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Safir characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 1 / 11 68 / 1 / 11 68 / 1 / 11 67 / 1 / 11 66 / 1 / 11 65 / 1 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 6 / 42 / 6 / 42 / 2 6 / 42 / 0 5 / 42 / 28 4 / 42 / 25 / 42 / 24 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 11

CE Marking of Coated glass - EN 1096-4:2004 Stopray Safir Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Safir, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Safir characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 1 / 11 68 / 1 / 11 68 / 1 / 11 67 / 1 / 11 66 / 1 / 11 65 / 1 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 6 / 42 / 6 / 42 / 2 6 / 42 / 0 5 / 42 / 28 4 / 42 / 25 / 42 / 24 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 12

CE Marking of Coated glass - EN 1096-4:2004 Stopray Safir Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Safir, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Safir characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 68 / 1 / 11 68 / 1 / 11 68 / 1 / 11 67 / 1 / 11 66 / 1 / 11 65 / 1 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 6 / 42 / 6 / 42 / 2 6 / 42 / 0 5 / 42 / 28 4 / 42 / 25 / 42 / 24 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 1

CE Marking of Coated glass - EN 1096-4:2004 Stopray Safir on Clearvision (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Safir on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Safir on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 70 / 1 / 11 70 / 1 / 11 70 / 1 / 11 69 / 1 / 11 69 / 1 / 11 69 / 1 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 42 / 8 8 / 42 / 8 8 / 42 / 7 7 / 42 / 7 7 / 42 / 6 7 / 42 / 5 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 14

CE Marking of Coated glass - EN 1096-4:2004 Stopray Safir on Clearvision Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Safir on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Safir on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 70 / 1 / 11 70 / 1 / 11 70 / 1 / 11 69 / 1 / 11 69 / 1 / 11 69 / 1 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 42 / 8 8 / 42 / 8 8 / 42 / 7 7 / 42 / 7 7 / 42 / 6 7 / 42 / 5 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 15

CE Marking of Coated glass - EN 1096-4:2004 Stopray Safir on Clearvision Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Safir on Clearvision, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Safir on Clearvision characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 5 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 70 / 1 / 11 70 / 1 / 11 70 / 1 / 11 69 / 1 / 11 69 / 1 / 11 69 / 1 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 42 / 8 8 / 42 / 8 8 / 42 / 7 7 / 42 / 7 7 / 42 / 6 7 / 42 / 5 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 16

CE Marking of Coated glass - EN 1096-4:2004 Stopray Selva (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Selva, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Selva characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,06 0,06 0,06 0,06 0,06 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 60 / 6 / 12 58 / 6 / 11 56 / 6 / 11 52 / 6 / 10 48 / 5 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2 / 0 / 12 29 / 0 / 10 27 / 0 / 9 2 / 0 / 8 21 / 0 / 7 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 17

CE Marking of Coated glass - EN 1096-4:2004 Stopray Selva Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Selva, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Selva characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,06 0,06 0,06 0,06 0,06 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 60 / 6 / 12 58 / 6 / 11 56 / 6 / 11 52 / 6 / 10 48 / 5 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2 / 0 / 12 29 / 0 / 10 27 / 0 / 9 2 / 0 / 8 21 / 0 / 7 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 18

CE Marking of Coated glass - EN 1096-4:2004 Stopray Selva Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Selva, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Selva characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,06 0,06 0,06 0,06 0,06 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 60 / 6 / 12 58 / 6 / 11 56 / 6 / 11 52 / 6 / 10 48 / 5 / 9 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 2 / 0 / 12 29 / 0 / 10 27 / 0 / 9 2 / 0 / 8 21 / 0 / 7 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 19

CE Marking of Coated glass - EN 1096-4:2004 Stopray Sienna (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Sienna, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Sienna characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 52 / 8 / 7 47 / 8 / 6 42 / 8 / 6 4 / 7 / 5 28 / 7 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 7 / 20 27 / 7 / 17 24 / 7 / 15 20 / 7 / 12 16 / 7 / 9 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 20

CE Marking of Coated glass - EN 1096-4:2004 Stopray Sienna Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Sienna, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Sienna characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 52 / 8 / 7 47 / 8 / 6 42 / 8 / 6 4 / 7 / 5 28 / 7 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 7 / 20 27 / 7 / 17 24 / 7 / 15 20 / 7 / 12 16 / 7 / 9 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 21

CE Marking of Coated glass - EN 1096-4:2004 Stopray Sienna Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Sienna, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Sienna characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 52 / 8 / 7 47 / 8 / 6 42 / 8 / 6 4 / 7 / 5 28 / 7 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 7 / 20 27 / 7 / 17 24 / 7 / 15 20 / 7 / 12 16 / 7 / 9 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASSa PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 22

CE Marking of Coated glass - EN 1096-4:2004 Stopray Topaz (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Topaz, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray topaz characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 7 / 8 51 / 7 / 7 45 / 7 / 7 7 / 6 / 6 0 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 0 / 18 6 / 0 / 15 2 / 0 / 1 27 / 0 / 11 22 / 0 / 9 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 2

CE Marking of Coated glass - EN 1096-4:2004 Stopray Topaz Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Topaz, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray topaz characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 7 / 8 51 / 7 / 7 45 / 7 / 7 7 / 6 / 6 0 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 0 / 18 6 / 0 / 15 2 / 0 / 1 27 / 0 / 11 22 / 0 / 9 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 24

CE Marking of Coated glass - EN 1096-4:2004 Stopray Topaz Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Topaz, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray topaz characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 7 / 8 51 / 7 / 7 45 / 7 / 7 7 / 6 / 6 0 / 6 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 0 / 18 6 / 0 / 15 2 / 0 / 1 27 / 0 / 11 22 / 0 / 9 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 25

CE Marking of Coated glass - EN 1096-4:2004 Stopray Ultramarine (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Ultramarine, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Ultramarine characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 61 / 12 / 10 56 / 12 / 9 5 / 12 / 9 49 / 12 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 42 / 14 27 / 42 / 10 24 / 41 / 8 22 / 41 / 7 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 26

CE Marking of Coated glass - EN 1096-4:2004 Stopray Ultramarine Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Ultramarine, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Ultramarine characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 61 / 12 / 10 56 / 12 / 9 5 / 12 / 9 49 / 12 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 42 / 14 27 / 42 / 10 24 / 41 / 8 22 / 41 / 7 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 27

CE Marking of Coated glass - EN 1096-4:2004 Stopray Ultramarine Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopray Ultramarine, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopray Ultramarine characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 61 / 12 / 10 56 / 12 / 9 5 / 12 / 9 49 / 12 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 42 / 14 27 / 42 / 10 24 / 41 / 8 22 / 41 / 7 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 28

Stopsol 29

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Classic Clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Clear, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Clear characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 4 / 27 8 / 4 / 27 8 / 4 / 27 7 / 4 / 26 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 48 / 29 / 22 47 / 29 / 22 46 / 29 / 21 44 / 28 / 20 54 5 52 51 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 0

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Classic Clear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Clear Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Clear Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 4 / 27 8 / 4 / 27 8 / 4 / 27 7 / 4 / 26 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 48 / 29 / 22 47 / 29 / 22 46 / 29 / 21 44 / 28 / 20 54 5 52 51 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 1

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Classic Clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Clear Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 4 / 27 8 / 4 / 27 8 / 4 / 27 7 / 4 / 26 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 48 / 29 / 22 47 / 29 / 22 46 / 29 / 21 44 / 28 / 20 54 5 52 51 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 2

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Classic Bronze (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Bronze, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Bronze characteristics in : AVCP Systems 4 mm 5 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 26 / 4 / 15 24 / 4 / 1 22 / 4 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5 / 28 / 14 2 / 28 / 12 29 / 28 / 10 44 42 9 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Classic Bronze Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Bronze Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Bronze Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 26 / 4 / 15 24 / 4 / 1 22 / 4 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5 / 28 / 14 2 / 28 / 12 29 / 28 / 10 44 42 9 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 4

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Classic Bronze Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Bronze Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Bronze Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) 1C 1C 1C2 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 26 / 4 / 15 24 / 4 / 1 22 / 4 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5 / 28 / 14 2 / 28 / 12 29 / 28 / 10 44 42 9 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 5

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Classic Dark Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Dark Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Dark Blue characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 24 / 4 / 14 20 / 28 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 12 15 / 28 / 8 2 29 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 6

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Classic Dark Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Dark Blue Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Dark Blue Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 24 / 4 / 14 20 / 28 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 12 15 / 28 / 8 2 29 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 7

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Classic Dark Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Dark Blue Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Dark Blue Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 24 / 4 / 14 20 / 28 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 21 / 4 / 12 15 / 28 / 8 2 29 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 8

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Classic Green (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Green, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Green characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 4 / 22 2 / 4 / 21 1 / 4 / 20 29 / 4 / 18 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 28 / 1 25 / 28 / 12 22 / 28 / 11 18 / 28 / 9 9 6 4 0 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 9

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Classic Green Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Green Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Green Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 4 / 22 2 / 4 / 21 1 / 4 / 20 29 / 4 / 18 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 28 / 1 25 / 28 / 12 22 / 28 / 11 18 / 28 / 9 9 6 4 0 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 40

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Classic Green Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Green Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Green Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 4 / 22 2 / 4 / 21 1 / 4 / 20 29 / 4 / 18 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 28 / 1 25 / 28 / 12 22 / 28 / 11 18 / 28 / 9 9 6 4 0 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 41

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Classic Grey (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Grey, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Grey characteristics in : AVCP Systems 4 mm 5 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 24 / 4 / 1 21 / 4 / 11 19 / 4 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 28 / 1 0 / 28 / 11 27 / 28 / 10 42 40 7 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 42

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Classic Grey Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Grey Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Grey Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 24 / 4 / 1 21 / 4 / 11 19 / 4 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 28 / 1 0 / 28 / 11 27 / 28 / 10 42 40 7 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 4

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Classic Grey Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Classic Grey Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Classic Grey Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 24 / 4 / 1 21 / 4 / 11 19 / 4 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 28 / 1 0 / 28 / 11 27 / 28 / 10 42 40 7 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 44

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Phoenix Clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Clear, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Clear characteristics in : AVCP Systems 4 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 1 (-2;-) 11. - U-value (EN 67) 5.7 5.7 5.6 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 67 / 2 / 1 67 / 1 / 0 66 / 1 / 0 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 69 / 25 / 2 67 / 25 / 22 64 / 25 / 21 70 69 67 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 45

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Phoenix Clear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Clear Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Clear Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 1 (-2;-) 11. - U-value (EN 67) 5.7 5.7 5.6 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 67 / 2 / 1 67 / 1 / 0 66 / 1 / 0 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 69 / 25 / 2 67 / 25 / 22 64 / 25 / 21 70 69 67 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 46

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Phoenix Clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004/14179-2 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Clear Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 1 (-2;-) 11. - U-value (EN 67) 5.7 5.7 5.6 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 67 / 2 / 1 67 / 1 / 0 66 / 1 / 0 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 69 / 25 / 2 67 / 25 / 22 64 / 25 / 21 70 69 67 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 47

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Phoenix Green (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Green, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Green characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 1 (-2;-) 11. - U-value (EN 67) 5,7 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 54 / 1 / 22 50 / 1 / 20 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 2 / 12 28 / 2 / 11 4 0 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 48

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Phoenix Green Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Green Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Green Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) 5,7 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 54 / 1 / 22 50 / 1 / 20 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 2 / 12 28 / 2 / 11 4 0 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 49

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Phoenix Green Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Green Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Green Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) 5,7 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 54 / 1 / 22 50 / 1 / 20 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 2 / 12 28 / 2 / 11 4 0 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 50

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Phoenix Grey (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Grey, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Grey characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 1 (-2;-) 11. - U-value (EN 67) 5,7 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 0 / 11 26 / 0 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 2 / 10 0 / 2 / 8 47 41 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 51

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Phoenix Grey Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Grey Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Grey Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) 5,7 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 0 / 11 26 / 0 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 2 / 10 0 / 2 / 8 47 41 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 52

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Phoenix Grey Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Phoenix Grey Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Phoenix Grey Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 11. - U-value (EN 67) 5,7 5,6 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v / 0 / 11 26 / 0 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 2 / 10 0 / 2 / 8 47 41 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 5

CE Marking of Coated glass - EN 1096-4:2004 Stopsol SilverLight PrivaBlue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol SilverLight PrivaBlue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol SilverLight PrivaBlue characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 27 / 24 / 8 20 / 24 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 16 / 20 / 6 11 / 20 / 6 1 27 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 54

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol SilverLight PrivaBlue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol SilverLight PrivaBlue Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 Stopsol SilverLight PrivaBlue Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 27 / 24 / 8 20 / 24 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 16 / 20 / 6 11 / 20 / 6 1 27 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 55

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol SilverLight PrivaBlue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol SilverLight PrivaBlue Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol SilverLight PrivaBlue Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 27 / 24 / 8 20 / 24 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 16 / 20 / 6 11 / 20 / 6 1 27 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 56

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Supersilver Clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Clear, intended to be used in buildings and construction works, following EN 1096-4:2004 Stopsol Supersilver Clear characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 64 / 5 / 5 64 / 5 / 4 6 / 5 / 4 62 / 5 / 4 62 / 5 / 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66 / 28 / 25 65 / 28 / 25 64 / 27 / 24 62 / 27 / 2 59 / 27 / 22 68 67 66 64 6 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 57

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Supersilver Clear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Clear Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Clear Heat strengthened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 64 / 5 / 5 64 / 5 / 4 6 / 5 / 4 62 / 5 / 4 62 / 5 / 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66 / 28 / 25 65 / 28 / 25 64 / 27 / 24 62 / 27 / 2 59 / 27 / 22 68 67 66 64 6 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 58

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Supersilver Clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Clear Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 5 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 5,8 5,8 5,7 5,7 5,6 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 64 / 5 / 5 64 / 5 / 4 6 / 5 / 4 62 / 5 / 4 62 / 5 / 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66 / 28 / 25 65 / 28 / 25 64 / 27 / 24 62 / 27 / 2 59 / 27 / 22 68 67 66 64 6 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 59

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Supersilver Dark Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Dark Blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Dark Blue characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 41 / 4 / 17 5 / 4 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 26 / 12 24 / 26 / 10 40 6 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 60

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Supersilver Dark Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Dark Blue Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Dark Blue Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 41 / 4 / 17 5 / 4 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 26 / 12 24 / 26 / 10 40 6 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 61

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Supersilver Dark Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Dark Blue Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Dark Blue Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 41 / 4 / 17 5 / 4 / 14 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 26 / 12 24 / 26 / 10 40 6 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 62

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Supersilver Green (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Green, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Green characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 52 / 4 / 25 48 / 4 / 22 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 26 / 14 27 / 26 / 12 4 8 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 6

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Supersilver Green Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Green Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Green Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 52 / 4 / 25 48 / 4 / 22 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 26 / 14 27 / 26 / 12 4 8 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 64

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Supersilver Green Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Green Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Green Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 52 / 4 / 25 48 / 4 / 22 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e / 26 / 14 27 / 26 / 12 4 8 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 65

CE Marking of Coated glass - EN 1096-4:2004 Stopsol Supersilver Grey (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Grey, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Grey characteristics in : AVCP Systems 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,7 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 4 / 1 29 / 4 / 11 2 / 4 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 27 / 11 4 / 27 / 10 26 / 26 / 8 46 4 8 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 66

CE Marking of Heat strengthened glass - EN 186-2:2004 Stopsol Supersilver Grey Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Grey Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Grey Heat strengthened characteristics in : AVCP Systems 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,7 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 4 / 1 29 / 4 / 11 2 / 4 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 27 / 11 4 / 27 / 10 26 / 26 / 8 46 4 8 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 67

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Stopsol Supersilver Grey Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stopsol Supersilver Grey Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stopsol Supersilver Grey Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 5 mm 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-1;-2) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 5,8 5,7 5,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 4 / 1 29 / 4 / 11 2 / 4 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 8 / 27 / 11 4 / 27 / 10 26 / 26 / 8 46 4 8 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 68

Stratobel 69

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel clear (22.x,.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 22.1 22.2.1.2.4 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD P1A-P2A PA-P4A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 2 (-1;-) (-1;-4) NPD 11. - U-value (EN 67) 5,7 5,7 5,7 5,6 5,5 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 89 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 79 / 7 / 7 77 / 7 / 7 76 / 7 / 7 74 / 7 / 7 72 / 7 / 7 82 81 80 79 77 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 70

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel clear (44.x, 55.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 44.1 44.2 44.4 44.6 55.1 55.2 55.4 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A PA-P4A P5A NPD P1A-P2A PA-P4A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 5 (-1;-) NPD 5 (-1;-) 5 (-1;-) NPD 6 (-1;-4) 11. - U-value (EN 67) 5,6 5,6 5,5 5, 5,6 5,5 5,4 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 8 / 8 88 / 8 / 8 88 / 8 / 8 88 / 8 / 8 87 / 8 / 8 87 / 8 / 8 87 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 72 / 7 / 7 70 / 7 / 7 69 / 7 / 7 70 / 7 / 7 69 / 7 / 7 67 / 7 / 7 78 77 75 74 76 75 7 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 71

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel clear (66.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 66.1 66.2 66.4 66.6 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A PA-P4A P5A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 6 (-1;-) 7 (-1;-4) NPD 11. - U-value (EN 67) 5,5 5,4 5, 5,2 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 8 /8 86 / 8 / 8 86 / 8 / 8 86 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 68 / 7 / 7 66 / 7 / 7 65 / 6 / 6 64 / 6 / 6 74 7 72 71 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 72

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel clear (88.x, 10 10.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 88.1 88.2 88.4 10 10.2 10 10.4 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A PA-P4A P1A-P2A PA-P4A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 9 (-1;-) NPD NPD NPD 11. - U-value (EN 67) 5, 5, 5,2 5,2 5,1 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 8 / 8 84 / 8 / 8 84 / 8 / 8 82 / 7 / 7 82 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 6 / 6 / 6 62 / 6 / 6 60 / 6 / 6 58 / 6 / 6 56 / 6 / 6 70 69 68 66 65 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 7

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Linea Azzurra (88.x, 10 10.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Linea Azzurra, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Linea Azzurra characteristics in : AVCP Systems 88.2 88.4 10 10.2 10 10.4 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) P1A-P2A PA-P4A P1A-P2A PA-P4A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 9 (-1;-) NPD NPD NPD 11. - U-value (EN 67) 5, 5,2 5,2 5,1 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 7 / 7 82 / 7 / 7 80 / 7 / 7 80 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 55 / 6 / 6 5 / 6 / 6 50 / 6 / 6 49 / 6 / 6 64 6 60 60 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 74

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel iplus Energy N Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel iplus Energy N, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel iplus Energy N characteristics in : AVCP.1.2 44.1 44.2 66.1 66.2 Systems Energy N Energy N Energy N Energy N Energy N Energy N 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) (-1;-4) 4 (-1;-2) 5 (-1;-) NPD 6 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 80 / 7 / 7 80 / 7 / 7 79 / 7 / 7 79 / 7 / 7 77 / 7 / 6 77 / 7 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 41 / 26 40 / 41 / 25 9 / 41 / 24 9 / 41 / 2 8 / 41 / 20 7 / 41 / 19 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 75

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel iplus G Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel iplus G, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel iplus G characteristics in : AVCP Systems.1 G.2 G 44.1 G 44.2 G 66.1 G 66.2 G 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) (-1;-4) 4 (-1;-2) 5 (-1;-) NPD 6 (-1;-) 11. - U-value (EN 67),6,6,6,6,5,5 0,14 0,14 0,14 0,14 0,14 0,14 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 11 / 10 81 / 11 / 10 80 / 11 / 10 80 / 11 / 10 79 / 10 / 10 79 / 10 / 10 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66 / 11 / 9 65 / 11 / 9 64 / 11 / 9 6 / 11 / 8 60 / 10 / 8 59 / 10 / 8 70 69 68 67 64 64 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 76

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel iplus I-Top Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel iplus I-Top, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel iplus I-Top characteristics in : AVCP Systems 22.1 I-Top 22.2 I-Top.1 I-Top.2 I-Top 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 2 (-1;-) (-1;-4) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 6 / 7 87 / 6 / 7 86 / 6 / 7 86 / 6 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 57 / 29 / 22 56 / 29 / 21 54 / 28 / 19 54 / 28 / 18 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 77

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel iplus I-Top Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel iplus I-Top, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel iplus I-Top characteristics in : AVCP Systems 44.1 I-Top 44.2 I-Top 55.1 I-Top 55.2 I-Top 66.2 I-Top 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 5 (-1;-) 5 (-1;-) NPD 6 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 85 / 5 / 7 85 / 5 / 7 84 / 5 / 7 84 / 5 / 7 8 / 5 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 52 / 28 / 17 52 / 28 / 16 51 / 28 / 15 50 / 28 / 14 48 / 28 / 1 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 78

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel iplus Light Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel iplus Light, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel iplus Light characteristics in : AVCP Systems 22.1 Light 22.2 Light.1 Light 44.1 Light 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 2 (-1;-) 4 (-1;-2) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 71/19/21 71/19/21 71/19/21 71/19/21 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 41/4/4 41/4/ 41/4/29 40/4/26 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 79

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel iplus Top 1.0 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel iplus Top 1.0, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel iplus Top 1.0 characteristics in : AVCP Systems 22.1 Top 1.0 22.2 Top 1.0.1 Top 1.0.2 Top 1.0 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 2 (-1;-) (-1;-4) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 15 / 17 77 / 15 / 17 76 / 15 / 17 76 / 15 / 17 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 45 / 42 / 45 / 42 / 2 45 / 42 / 0 44 / 42 / 29 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 80

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel iplus Top 1.0 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel iplus Top 1.0, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel iplus Top 1.0 characteristics in : AVCP Systems 44.1 Top 1.0 44.2 Top 1.0 66.1 Top 1.0 66.2 Top 1.0 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 5 (-1;-) NPD 6 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 75 / 15 / 17 75 / 15 / 17 74 / 14 / 16 74 / 14 / 16 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 42 / 28 4 / 42 / 27 42 / 42 / 24 42 / 42 / 2 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 81

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Low-e Top N Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Low-e Top N, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Low-e Top N characteristics in : AVCP Systems.1 Top N.2 Top N 44.1 Top N 44.2 Top N 66.1 Top N 66.2 Top N 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) (-1;-4) 4 (-1;-2) 5 (-1;-) NPD 6 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 6 / 8 86 / 6 / 8 85 / 6 / 8 85 / 6 / 8 84 / 6 / 8 8 / 6 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 60 / 25 / 18 59 / 25 / 17 58 / 25 / 17 58 / 25 / 16 56 /24 / 15 56 / 24 / 14 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 82

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Low-e Top N+ Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Low-e Top N+, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Low-e Top N+ characteristics in : AVCP Systems 22.1 Top N+ 22.2 Top N+.1 Top N+.2 Top N+ 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 2 (-1;-) (-1;-4) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87/6/8 87/6/8 86/6/7 86/6/7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 57/29/22 56/29/21 55/29/20 54/29/19 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 8

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Low-e Top N+ Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Low-e Top N+, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Low-e Top N+ characteristics in : AVCP Systems 44.1 Top N+ 44.2 Top N+ 66.1 Top N+ 66.2 Top N+ 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 5 (-1;-) NPD 6 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 85/6/7 85/6/7 8/6/7 8/6/7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5/29/18 5/29/18 50/29/16 50/29/15 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 84

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Low-e Tri Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Low-e Tri, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Low-e Tri characteristics in : AVCP Systems 22.1 Tri 22.2 Tri.1 Tri.2 Tri 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 2 (-1;-) (-1;-4) 11. - U-value (EN 67) NPD NPD NPD NPD 0,07 0,07 0,07 0,07 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88/7/8 88/7/8 87/7/8 87/7/8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 68/17/1 68/17/12 66/17/12 65/17/11 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 85

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Low-e Tri Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Low-e Tri, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Low-e Tri characteristics in : AVCP Systems 44.1 Tri 44.2 Tri 55.2 Tri 66.2 Tri 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 5 (-1;-) NPD 6 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,07 0,07 0,07 0,07 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86/7/8 86/6/8 84/6/8 84/6/8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 64/16/11 6/16/11 60/16/10 59/16/10 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 86

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Stopray LamiSmart 24 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Stopray LamiSmart 24, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Stopray LamiSmart 24 characteristics in : AVCP Systems 44.1 LamiSmart 24 66.2 LamiSmart 24 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 6 (-1;-) 11. - U-value (EN 67) NPD NPD 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 24/5/28 2/4/27 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14/8/0 1/5/26 25 25 14. Durability PASS PASS 26th of February 2015 Primary Sales & Strategic, Marketing Director, Building 87

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Stopray LamiSmart 24 (laminated with Planibel Bronze) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Stopray LamiSmart 24 (laminated with Planibel Bronze), intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Stopray LamiSmart 24 (laminated with Planibel Bronze) characteristics in : AVCP Systems 44.1 LamiSmart 24 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 NPD. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 11. - U-value (EN 67) NPD 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 16/16/5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 10/20/8 27 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 88

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Stopray LamiSmart 24 (laminated with Planibel Dark Blue) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Stopray LamiSmart 24 (laminated with Planibel Dark Blue), intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Stopray LamiSmart 24 (laminated with Planibel Dark Blue) characteristics in : AVCP Systems 44.1 LamiSmart 24 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 NPD. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 11. - U-value (EN 67) NPD 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 18/18/5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 10/14/8 28 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 89

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Stopray LamiSmart 24 (laminated with Planibel Green) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Stopray LamiSmart 24 (laminated with Planibel Green), intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Stopray LamiSmart 24 (laminated with Planibel Green) characteristics in : AVCP Systems 44.1 LamiSmart 24 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 NPD. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 11. - U-value (EN 67) NPD 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 21/2/5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 10/16/8 28 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 90

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Stopray LamiSmart 24 (laminated with Planibel Grey) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Stopray LamiSmart 24 (laminated with Planibel Grey), intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Stopray LamiSmart 24 (laminated with Planibel Grey) characteristics in : AVCP Systems 44.1 LamiSmart 24 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 NPD. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 NPD 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) NPD 7. Pendulum body impact resistance (EN 12600) 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 4 (-1;-2) 11. - U-value (EN 67) NPD 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 15/14/5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 10/18/8 27 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 91

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Burglar resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 0-402- 502-1 502-2 802-2 80-5 905-8 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) P7B P5A P6B P6B P6B P8B P8B 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5,0 5,2 5,1 5,1 5,1 4,8 4, 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 82 / 7 / 7 84 / 8 / 8 84 / 8 / 8 84 / 8 / 8 82 / 7 / 7 78 / 7 / 7 69 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 55 / 6 / 6 64 / 6 / 6 6 / 6 / 6 6 / 6 / 6 60 / 6 / 6 51 / 6 / 6 8 / 5 / 5 64 71 70 70 68 61 NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 92

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 00-2 00-5 004-1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR1 S BR1 NS BR S 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD P6B 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5,2 5,2 4,7 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 8 / 8 8 / 8 / 8 79 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59 / 6 / 6 59 / 6 / 6 49 / 6 / 6 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 9

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 10- (88-C) 104-1 402-1 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR2 S BR2 NS BR1 S 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) P7B P6B P4A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 4,9 4,8 5, 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 84 / 8 / 8 78 / 7 / 7 85 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 58 / 6 / 6 49 / 6 / 6 66 / 6 / 6 NPD 59 72 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 94

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 40-504-4 60-1 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR2 S BR5 S/SG2 S BRS 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD P8B P6B 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5,1 4,5 4,9 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 81 / 7 / 7 74 / 7 / 7 80 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 54 / 6 / 6 45 / 5 / 5 52 / 6 / 6 NPD 58 62 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 95

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 60-6 70-704- 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR1 S BR2 S BR NS 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD PA P6B 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5,1 5,1 4,6 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 80 / 7 / 7 80 / 7 / 7 74 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 5 / 6 / 6 5 / 6 / 6 45 / 5 / 5 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 96

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 80-6 902-4 902-5 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR2 S BR1 S BR1 S 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD P2A PA 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 4,9 5, 5, 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 79 / 7 / 7 8 / 8 / 8 8 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 51 / 6 / 6 60 / 6/ 6 60 / 6 / 6 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 97

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 00-1 009-1 04-6 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR2 S BR7 NS BR4 S / SG1 S 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) P2A P8B P6B 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5,1,6 4,6 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 8 / 8 62 / 6 / 6 78 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 58 / 6 / 6 27 / 5 / 5 48 / 6 / 6 66 NPD 59 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 98

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 408-1 802-5 806-2 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR6 NS BR1 NS BR5 NS 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) P8B P2A P7B 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67),9 5,2 4, 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 61 / 6 / 6 84 / 8 / 8 69 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 5 / 5 60 / 6 / 6 6 / 5 / 5 44 68 48 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 99

CE Marking of Double Glazing Unit EN 1279-5:2005 + A2:2010 Stratobel (Bullet resistant) in DGU Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 1207-1 209-1 4207-1 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR4 NS / BR6 S BR6 NS BR5 NS 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) P4A P6B NPD 7. Pendulum body impact resistance (EN 12600) 1B1 / 1B1 1B1 / 1B1 1B1 / 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 2,6 2,4 2,5 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 65 / 12 / 12 58 / 11 / 11 65 / 12 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 8 / 8 27 / 7 / 7 / 8 / 8 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 400

CE Marking of Double Glazing Unit EN 1279-5:2005 + A2:2010 Stratobel (Bullet resistant) in DGU Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 6208-1 8209-1 9207-1 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR7 S BR7 NS SG1 NS 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) P8B P8B P4A 7. Pendulum body impact resistance (EN 12600) 1B1 / 1B1 1B1 / 1B1 1B1 / 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 2,4 2, 2,5 NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 61 / 11 / 11 57 / 11 / 11 62 / 12 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 29 / 8 / 8 25 / 7 / 7 1 / 8 / 8 NPD NPD NPD 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 401

CE Marking of Double Glazing Unit EN 1279-5:2005 + A2:2010 Stratobel (Bullet resistant) in DGU Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 9208-1 1. Resistance to fire (EN 1501-2) 1 NPD 2. Reaction to fire (EN 1501-1), 4 NPD. External fire performances, 4 NPD 4. Bullet resistance (EN 106) 1 SG2 NS 5. Explosion resistance (EN 1541) 1 NPD 6. Burglar resistance (EN 56) P8B 7. Pendulum body impact resistance (EN 12600) 1B1 / 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD 11. - U-value (EN 67) 2, NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 61 / 11 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 28 / 7 / 7 NPD 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 402

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel (Blast resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 1541 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel characteristics in : AVCP Systems 002-2 902-2 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 ER1 S ER2 S 6. Burglar resistance (EN 56) P5A P6B 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 5 (-1;-) NPD 11. - U-value (EN 67) 5,4 5,0 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 8 / 8 84 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 69 / 7 / 7 59 / 6 / 6 74 NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 40

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Color Standard Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Color Standard, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel color standard characteristics in : AVCP.1 Blue.1 Bronze.1 French.1 Medium.1 Grey Systems green 77 6542 Bronze 558 bronze 628 6544 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 2B2 2B2 2B2 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) 2 (-1;-) 2 (-1;-) 2 (-1;-) 2 (-1;-) 11. - U-value (EN 67) 5,7 5,7 5,7 5,7 5,7 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 7 / 7 / 7 54 / 6 / 6 58 / 6 / 6 29 / 5 / 5 42 / 5 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 68 / 6 / 6 5 / 6 / 6 57 / 6 / 6 2 / 5 / 5 48 / 5 / 5 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 404

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Color Standard Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Color Standard, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel color standard characteristics in : AVCP.1 Mat.2 Mat 44.1 Mat 44.2 Mat Systems 2165 2165 2165 2165 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A P2A NPD P1A P2A 7. Pendulum body impact resistance (EN 12600) 2B2 1B1 2B2 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) (-1;-4) 4 (-1;-2) 5 (-1;-) 11. - U-value (EN 67) 5,7 5,6 5,6 5,5 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 67 / 12 / 12 68 / 12 / 12 66 / 12 / 12 67 / 12 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 61 / 10 / 10 61 / 10 / 10 59 / 10 / 10 59 / 10 / 10 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 405

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Color Rainnbow Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Color Rainbow, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel color rainbow characteristics in : AVCP Systems.1 Vanceva 1 Coral Rose.1 Vanceva 2 Aquamarine.1 Vanceva Smoke Grey.1 Vanceva 4 Sahara Sun.1 Vanceva 5 Ruby Red 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 2B2 2B2 2B2 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) 2 (-1;-) 2 (-1;-) 2 (-1;-) 2 (-1;-) 11. - U-value (EN 67) 5,7 5,7 5,7 5,7 5,7 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 7 / 7 79 / 7 / 7 78 / 7 / 7 77 / 7 / 7 48 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 71 / 7 / 7 69 / 7 / 7 62 / 6 / 6 6 / 6 / 6 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 406

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Color Rainbow Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Color Rainbow, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel color rainbow characteristics in : AVCP Systems.1 Vanceva 6 Sapphire.1 Vanceva 7 Midnight.1 Vanceva 8 Golden light.1 Vanceva 9 Artic Snow 44.1 Vanceva 9 Artic Snow 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 2B2 2B2 2B2 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) 2 (-1;-) 2 (-1;-) 2 (-1;-) 4 (-1;-2) 11. - U-value (EN 67) 5,7 5,7 5,7 5,7 5,7 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 52 / 6 / 6 50 / 5 / 5 86 / 8 / 8 67 / 12 / 12 66 / 12 / 12 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 57 / 6 / 6 48 / 5 / 5 70 / 7 / 7 61 / 10 / 10 59 / 10 / 10 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 407

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Color Rainbow Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Color Rainbow, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel color rainbow characteristics in : AVCP Systems.1 Vanceva A Cool White 44.1 Vanceva A Cool White.2 Vanceva C00 Pure White.1 Vanceva C Deep Red.1 Vanceva D True Blue 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD P1A P2A NPD NPD 7. Pendulum body impact resistance (EN 12600) 2B2 2B2 1B1 2B2 2B2 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-1;-) 4 (-1;-2) NPD 2 (-1;-) 2 (-1;-) 11. - U-value (EN 67) 5,7 5,7 5,7 5,7 5,7 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 8 / 9 / 9 82 / 9 / 9 8 / 6 / 6 16 / 5 / 5 14 / 4 / 4 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 72 / 8 / 8 70 / 8 / 8 8 / 47 / 47 5 / 5 / 5 41 / 5 / 5 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 408

Stratobel EVA 409

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel EVA Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel EVA, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel EVA characteristics with tempered components: AVCP Systems 55.2T 66.2T 68.2T 88.2T 10 10.T 12 12.T 15 15.4T 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5,5 5,4 5,4 5, 5,2 5,1 4,9 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 8 / 8 85 / 8 / 8 84 / 8 / 8 8 / 8 / 8 81 / 7 / 7 80 / 7 / 7 77 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 7 / 7 65 / 6 / 6 6 / 6 / 6 61 / 6 / 6 55 / 6 / 6 52 / 6 / 6 47 / 6 / 6 NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 410

Stratobel Impression 411

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Impression Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel Impression, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel Impression characteristics: AVCP Systems. 44. 55. 66. 88. 10 10. 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 412

Stratobel PC 41

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel PC (Burglar resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel PC, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel PC characteristics in : AVCP Systems 214.541 216.541 219.841 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) P6B P7B P8B 7. Pendulum body impact resistance (EN 12600) 1(B)1 1(B)1 1(B)1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 5, 5, 5,1 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 85 / 8 / 8 84 / 8 / 8 8 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 67 / 7 / 7 65 / 7 / 7 64 / 6 / 6 7 72 71 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 414

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel PC (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel PC, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel PC characteristics in : AVCP Systems 810.61 815.051 819.070 82.860 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR1 NS BR2 NS BR NS BR4 NS / SG1 NS 5. Explosion resistance (EN 1541) 1 NPD NPD NPD ER NS 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1(B)1 1(B)1 1(B)1 1(B)1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD 11. - U-value (EN 67) 5, 5, 5,2 5,0 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 85 / 8 / 8 85 / 8 / 8 8 / 8 / 8 80 / 7 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66 / 6 / 6 65 / 6 / 6 60 / 6 / 6 54 / 6 / 6 72 72 68 6 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 415

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel PC (Bullet resistant) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel PC, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel PC characteristics in : AVCP Systems 85.800 841.70 869.600 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 BR5 NS / SG2 NS BR6 NS BR7 NS 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1(B)1 1(B)1 1(B)1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD 11. - U-value (EN 67) 4,7 4,5,6 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 76 / 7 / 7 74 / 7 / 7 58 / 6 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 46 / 6 / 6 4 / 5 / 5 25 / 5 / 5 58 55 41 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 416

CE Marking of Double Glazing Unit EN 1279-5:2005 + A2:2010 Stratobel PC (Bullet resistant) in DGU Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel PC, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel PC characteristics in : AVCP Systems 848i560 890i100 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 BR6 NS BR7 NS 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 / 1B1 1B1 / 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 11. - U-value (EN 67) 2,6 2, NPD NPD 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 70 / 1 / 1 56 / 11 / 11 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 42 / 10 / 10 26 / 7 / 7 NPD NPD 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 417

Stratobel Other products 418

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Other products (level ) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel (level products) characteristics in : AVCP Systems 1. Resistance to fire (EN 1501-2) 1 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) For 1 characteristics, see 8. Resistance against sudden temperature change and temperature differentials 4 www.yourglass.com\ce 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 419

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Other products (level 1) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel (level 1 products) characteristics in : AVCP Systems 1. Resistance to fire (EN 1501-2) 1 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 For 1 characteristics, see www.yourglass.com\ce 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 420

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Other products (level ) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel (level products) characteristics in : AVCP Systems 1. Resistance to fire (EN 1501-2) 1 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) For 1 characteristics, see 8. Resistance against sudden temperature change and temperature differentials 4 www.yourglass.com\ce 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 421

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratobel Other products (level 1) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratobel, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratobel (level 1 products) characteristics in : AVCP Systems 1. Resistance to fire (EN 1501-2) 1 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 For 1 characteristics, see www.yourglass.com\ce 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 422

Stratophone 42

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone clear (22.x,.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone characteristics in : AVCP Systems 22.1 22.2.1.2 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) (-1;-5) (-1;-4) 5 (-1;-) 6 (0;-) 11. - U-value (EN 67) 5,7 5,7 5,7 5,6 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 90 / 8 / 8 90 / 8 / 8 89 / 8 / 8 89 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 79 / 7 / 7 77 / 7 / 7 76 / 7 / 7 74 / 7 / 7 82 81 80 79 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 424

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone clear (44.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone characteristics in : AVCP Systems 44.1 44.2 44.4 44.6 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A PA-P4A P5A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 7 (-0, -2) 7 (0;-2) 7 (0;-) 8 (-1;-) 11. - U-value (EN 67) 5,6 5,6 5,5 5, 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88 / 8 / 8 88 / 8 / 8 88 / 8 / 8 88 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 7 / 7 / 7 72 / 7 / 7 70 / 7 / 7 69 / 7 / 7 78 77 75 74 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 425

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone clear (55.x, 66.x, 88.x) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone characteristics in : AVCP Systems 55.1 55.2 66.1 66.2 88.2 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 8 (-1;-) 9 (-1;-) 40 (-1;-) 40 (-1;-) 41 (-1;-2) 11. - U-value (EN 67) 5,6 5,5 5,5 5,4 5, 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 8 / 8 87 / 8 / 8 86 / 8 /8 86 / 8 / 8 84 / 8 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 70 / 7 / 7 69 / 7 / 7 68 / 7 / 7 66 / 7 / 7 62 / 6 / 6 76 75 74 7 69 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 426

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone iplus Energy N Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone iplus Energy N, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone iplus Energy N characteristics in : AVCP.1.2 44.1 44.2 66.1 66.2 Systems Energy N Energy N Energy N Energy N Energy N Energy N 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 5 (-1;-) 6 (0;-) 7 (0;-) 7 (0;-) 40 (-1;-) 40 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,01 0,01 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 80 / 7 / 7 80 / 7 / 7 79 / 7 / 7 79 / 7 / 7 77 / 7 / 6 77 / 7 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 41 / 26 40 / 41 / 25 9 / 41 / 24 9 / 41 / 2 8 / 41 / 20 7 / 41 / 19 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 427

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone iplus I-Top Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone iplus I-Top, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone iplus I-Top characteristics in : AVCP Systems 22.1 I-Top 22.2 I-Top.1 I-Top 44.1 I-Top 44.2 I-Top 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 2 (-2;-5) (-1;-4) 5 (-1;-) 7 (-0, -) 7 (0;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 6 / 7 87 / 6 / 7 86 / 6 / 7 85 / 5 / 7 85 / 5 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 57 / 29 / 22 56 / 29 / 21 54 / 28 / 19 52 / 28 / 17 52 / 28 / 16 NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 428

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone iplus Light Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone iplus Light, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone iplus Light characteristics in : AVCP Systems 22.1 Light 22.2 Light.1 Light 44.1 Light 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) (-2;-5) (-1;-4) 5 (-1;-) 7 (-0, -) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 71/19/21 71/19/21 71/19/21 71/19/21 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 41/4/4 41/4/ 41/4/29 40/4/26 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 429

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone iplus Top 1.0 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone iplus Top 1.0, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone iplus Top 1.0 characteristics in : AVCP Systems 22.1 Top 1.0 22.2 Top 1.0.1 Top 1.0.2 Top 1.0 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) (-2;-5) (-1;-4) 5 (-1;-) 6 (0;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 77 / 15 / 17 77 / 15 / 17 76 / 15 / 17 76 / 15 / 17 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 45 / 42 / 45 / 42 / 2 45 / 42 / 0 44 / 42 / 29 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 40

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone iplus Top 1.0 Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone iplus Top 1.0, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone iplus Top 1.0 characteristics in : AVCP Systems 44.1 Top 1.0 44.2 Top 1.0 66.1 Top 1.0 66.2 Top 1.0 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 7 (-0, -) 7 (0;-) 40 (-1;-) 40 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,01 0,01 0,01 0,01 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 75 / 15 / 17 75 / 15 / 17 74 / 14 / 16 74 / 14 / 16 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 44 / 42 / 28 4 / 42 / 27 42 / 42 / 24 42 / 42 / 2 NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 41

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone Low-e Top N Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone Low-e Top N, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone Low-e Top N characteristics in : AVCP Systems.1 Top N.2 Top N 44.1 Top N 44.2 Top N 66.1 Top N 66.2 Top N 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 5 (-1;-) 6 (0;-) 7 (-0, -) 7 (0;-) 40 (-1;-) 40 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,04 0,04 0,04 0,04 0,04 0,04 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 6 / 8 86 / 6 / 8 85 / 6 / 8 85 / 6 / 8 84 / 6 / 8 8 / 6 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 60 / 25 / 18 59 / 25 / 17 58 / 25 / 17 58 / 25 / 16 56 /24 / 15 56 / 24 / 14 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 42

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone Low-e Top N+ Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone Low-e Top N+, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone Low-e Top N+ characteristics in : AVCP Systems.1 Top N+.2 Top N+ 44.1 Top N+ 44.2 Top N+ 66.1 Top N+ 66.2 Top N+ 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 5 (-1;-) 6 (0;-) 7 (-0, -) 7 (0;-) 40 (-1;-) 40 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,0 0,0 0,0 0,0 0,0 0,0 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86 / 6 / 7 86 / 6 / 7 85 / 6 / 7 85 / 6 / 7 8 / 6 / 7 8 / 6 / 7 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 55 / 29 / 20 54 / 29 / 19 5 / 29 / 18 5 / 29 / 18 50 /29 / 16 50 / 29 / 15 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 4

CE Marking of Laminated glass EN 14449:2005 + AC:2005 Stratophone Low-e Tri Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Stratophone Low-e Tri, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Stratophone Low-e Tri characteristics in : AVCP Systems.1 Tri.2 Tri 44.1 Tri 44.2 Tri 55.2 Tri 66.2 Tri 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD P1A-P2A NPD P1A-P2A NPD P1A-P2A 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 5 (-1;-) 6 (0;-) 7 (-0, -) 7 (0;-) 40 (-1;-) 40 (-1;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD NPD 0,07 0,07 0,07 0,07 0,07 0,07 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87 / 7 / 8 87 / 7 / 8 86 / 7 / 8 86 / 6 / 8 84 / 6 / 8 84 / 6 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66 / 17 / 12 65 / 17 / 11 64 / 16 / 11 6 / 16 / 11 60 / 16 / 10 59 / 16 / 10 NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 44

Sunergy 45

CE Marking of Coated glass - EN 1096-4:2004 Sunergy Clear (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Clear, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Clear characteristics in : AVCP Systems mm 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 29 (-2;-5) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD NPD 0,28 0,28 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 69 / 10 / 9 69 / 10 / 9 68 / 10 / 9 67 / 10 / 8 66 / 10 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 56 / 10 / 10 56 / 10 / 10 54 / 10 / 9 52 / 10 / 9 50 / 10 / 9 62 61 60 59 57 14. Durability PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 46

CE Marking of Heat strengthened glass - EN 186-2:2004 Sunergy Clear Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Clear Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Clear Heat strengthened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,28 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 69 / 10 / 9 68 / 10 / 9 67 / 10 / 8 66 / 10 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 56 / 10 / 10 54 / 10 / 9 52 / 10 / 9 50 / 10 / 9 61 60 59 57 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 47

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Sunergy Clear Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Clear Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Clear Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,28 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 69 / 10 / 9 68 / 10 / 9 67 / 10 / 8 66 / 10 / 8 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 56 / 10 / 10 54 / 10 / 9 52 / 10 / 9 50 / 10 / 9 61 60 59 57 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 48

CE Marking of Coated glass - EN 1096-4:2004 Sunergy Azur (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Azur, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Azur characteristics in : AVCP Systems 4 mm 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1 A1. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 0 (-2;-4) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD NPD 0,28 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 60 / 10 / 8 56 / 10 / 7 52 / 9 / 7 48 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 40 / 10 / 7 4 / 10 / 6 29 / 9 / 6 26 / 9 / 6 49 44 40 7 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 49

CE Marking of Heat strengthened glass - EN 186-2:2004 Sunergy Azur Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Azur Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Azur Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 10 / 7 52 / 9 / 7 48 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 10 / 6 29 / 9 / 6 26 / 9 / 6 44 40 7 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 440

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Sunergy Azur Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Azur Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Azur Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) NPD NPD NPD 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 10 / 7 52 / 9 / 7 48 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 4 / 10 / 6 29 / 9 / 6 26 / 9 / 6 44 40 7 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 441

CE Marking of Coated glass - EN 1096-4:2004 Sunergy Dark Blue (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Dark blue, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Dark Blue characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 4,1 4,1 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 40 / 9 / 6 5 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 26 / 9 / 6 21 / 9 / 5 7 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 442

CE Marking of Heat strengthened glass - EN 186-2:2004 Sunergy Dark Blue Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Dark Blue Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Dark Blue Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 4,1 4,1 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 40 / 9 / 6 5 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 26 / 9 / 6 21 / 9 / 5 7 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 44

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Sunergy Dark Blue Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Dark Blue Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Dark Blue Thermally toughened or Heat soaked thermally toughened characteristics in AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 4,1 4,1 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 40 / 9 / 6 5 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 26 / 9 / 6 21 / 9 / 5 7 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 444

CE Marking of Coated glass - EN 1096-4:2004 Sunergy Green (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Green, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Green characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 4,1 4,1 4,0 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 10 / 7 52 / 9 / 7 48 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 9 / 6 26 / 9 / 6 22 / 9 / 5 41 8 8 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 445

CE Marking of Heat strengthened glass - EN 186-2:2004 Sunergy Green Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Green Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Green Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 4,1 4,1 4,0 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 10 / 7 52 / 9 / 7 48 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 9 / 6 26 / 9 / 6 22 / 9 / 5 41 8 8 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 446

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Sunergy Green Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Green Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Green Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 10 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1 A1. External fire performances, 4 NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 1C2 1C1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 4 (-2;-) 11. - U-value (EN 67) 4,1 4,1 4,0 0,28 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 56 / 10 / 7 52 / 9 / 7 48 / 9 / 6 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 1 / 9 / 6 26 / 9 / 6 22 / 9 / 5 41 8 8 14. Durability PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 447

CE Marking of Coated glass - EN 1096-4:2004 Sunergy Grey (annealed) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Grey, intended to be used in buildings and construction works, following EN 1096-4:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Grey characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 4,1 4,1 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 9 / 5 26 / 8 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 9 / 6 24 / 9 / 6 41 6 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 448

CE Marking of Heat strengthened glass - EN 186-2:2004 Sunergy Grey Heat strengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Grey Heat strengthened, intended to be used in buildings and construction works, following EN 186-2:2004 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Grey Heat strengthened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 4,1 4,1 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 9 / 5 26 / 8 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 9 / 6 24 / 9 / 6 41 6 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 449

CE Marking of Thermally toughened glass - EN 12150-2:2004 CE Marking of Heat soaked Thermally toughened glass - EN 14179-2:2005 Sunergy Grey Thermally toughened or Heat soaked thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Sunergy Grey Thermally toughened or Heat soaked thermally toughened, intended to be used in buildings and construction works, following EN 12150-2:2004 / 14179-2:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Sunergy Grey Thermally toughened or Heat soaked thermally toughened characteristics in : AVCP Systems 6 mm 8 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD 2. Reaction to fire (EN 1501-1), 4 A1 A1. External fire performances, 4 NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD 6. Burglar resistance (EN 56) NPD NPD 7. Pendulum body impact resistance (EN 12600) 1C2 NPD 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 1 (-2;-) 2 (-1;-2) 11. - U-value (EN 67) 4,1 4,1 0,28 0,28 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 4 / 9 / 5 26 / 8 / 5 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 0 / 9 / 6 24 / 9 / 6 41 6 14. Durability PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 450

SunEwat 451

CE Marking of Laminated glass EN 14449:2005 + AC:2005 SunEwat L 44.4 Heat stengthened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named SunEwat L, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 AVCP Systems Surface covered by solar celles regarding to the surface of the glass 44.4 SunEwat L characteristics in : 0 % 10 % 20 % 0 % 40 % 50 % 60 % 70 % 80 % 90 % 100 % 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 100 K 100 K 100 K 100 K 100 K 100 K 100 K 100 K 100 K 100 K 100 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88/8/8 79/8/11 70/8/1 62/8/16 5/8/18 44/9/21 5/9/2 26/9/26 18/9/28 9/9/1 0/9/ 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 75/7/7 68/9/9 60/9/11 5/10/1 45/11/15 8/12/17 0/12/19 2/1/21 15/14/2 8/15/25 0/16/27 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 452

CE Marking of Laminated glass EN 14449:2005 + AC:2005 SunEwat L 44.4 thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named SunEwat L, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 AVCP Systems Surface covered by solar celles regarding to the surface of the glass 44.4 SunEwat L characteristics in : 0 % 10 % 20 % 0 % 40 % 50 % 60 % 70 % 80 % 90 % 100 % 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 88/8/8 79/8/11 70/8/1 62/8/16 5/8/18 44/9/21 5/9/2 26/9/26 18/9/28 9/9/1 0/9/ 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 75/7/7 68/9/9 60/9/11 5/10/1 45/11/15 8/12/17 0/12/19 2/1/21 15/14/2 8/15/25 0/16/27 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 45

CE Marking of Laminated glass EN 14449:2005 + AC:2005 SunEwat XL 55.6 thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named SunEwat XL, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 AVCP Systems Surface covered by solar celles regarding to the surface of the glass 55.6 SunXEwat L characteristics in : 0 % 10 % 20 % 0 % 40 % 50 % 60 % 70 % 80 % 90 % 100 % 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87/8/8 78 /8/9 70/8/9 61/8/10 52/8/11 44/8/12 5/7/12 26/7/1 17/7/14 9/7/14 0/8/15 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 66/7/7 60/7/8 5/8/9 46/8/9 40/8/10 /9/11 26/9/12 20/9/1 1/9/1 7/10/14 0/10/15 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 454

CE Marking of Laminated glass EN 14449:2005 + AC:2005 SunEwat XL 66.6 thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named SunEwat XL, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 AVCP Systems Surface covered by solar celles regarding to the surface of the glass 66.6 SunEwat XL characteristics in : 0 % 10 % 20 % 0 % 40 % 50 % 60 % 70 % 80 % 90 % 100 % 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 87/8/8 77/8/9 69/8/9 60/8/10 52/8/11 4/8/12 4/7/12 26/7/1 17/7/14 9/7/14 0/8/15 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 64/6/6 58/6/7 51/7/8 45/7/9 9/8/10 2/8/11 26/8/11 19/9/12 1/9/1 6/10/14 0/10/15 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 455

CE Marking of Laminated glass EN 14449:2005 + AC:2005 SunEwat XL 88.6 thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named SunEwat XL, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 AVCP Systems Surface covered by solar celles regarding to the surface of the glass 88.6 SunEwat XL characteristics in : 0 % 10 % 20 % 0 % 40 % 50 % 60 % 70 % 80 % 90 % 100% 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 86/7/7 76/7/8 68/7/8 59/7/9 51/7/9 42/7/10 4/6/11 25/6/11 17/6/12 8/6/1 0/7/1 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 62/5/5 56/5/6 50/6/7 44/6/7 7/7/8 1/7/9 25/7/10 19/8/11 12/8/11 6/8/12 0/9/1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 456

CE Marking of Laminated glass EN 14449:2005 + AC:2005 SunEwat XL 10 10.6 thermally toughened Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named SunEwat XL, intended to be used in buildings and construction works, following EN 14449:2005 + AC:2005 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 AVCP Systems Surface covered by solar celles regarding to the surface of the glass 10 10.6 SunEwat XL characteristics in : 0 % 10 % 20 % 0 % 40 % 50 % 60 % 70 % 80 % 90 % 100% 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 1B1 8. Resistance against sudden temperature change and temperature differentials 4 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 200 K 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 11. - U-value (EN 67) 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 85/7/7 74/7/8 66/7/8 58/7/9 49/7/9 41/7/10 /6/11 25/6/11 16/6/12 8/6/1 0/7/1 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 59/5/5 5/5/6 47/6/7 41/6/7 5/7/8 29/7/9 2/7/10 18/8/11 12/8/11 6/8/12 0/9/1 NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 457

Thermally toughened glass for Shower enclosure 458

CE Marking of Thermally toughened glass for Shower enclosure EN 14428 Planibel Thermally toughened for shower enclosure Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Planibel Thermally toughened, intended to be used in Shower enclosure, following EN 14428 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Planibel Thermally toughened characteristics in : mm 4 mm 5 mm 6 mm 8 mm Cleanability Pass Impact resistance / Shatter properties Pass Durability Pass 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 459

Thermobel 460

CE Marking of Insulating glass unit - EN 1279-5:2005 + A2:2010 Thermobel (level products) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Thermobel, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Thermobel (level products) characteristics in : AVCP Systems 1. Resistance to fire (EN 1501-2) 1 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) For 1 characteristics, see 8. Resistance against sudden temperature change and temperature differentials 4 www.yourglass.com\ce 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 461

CE Marking of Insulating glass unit - EN 1279-5:2005 + A2:2010 Thermobel (level 1 products) Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Thermobel, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Thermobel (level 1 products) characteristics in : AVCP Systems 1. Resistance to fire (EN 1501-2) 1 2. Reaction to fire (EN 1501-1), 4. External fire performances, 4 4. Bullet resistance (EN 106) 1 5. Explosion resistance (EN 1541) 1 6. Burglar resistance (EN 56) 7. Pendulum body impact resistance (EN 12600) 8. Resistance against sudden temperature change and temperature differentials 4 For 1 characteristics, see www.yourglass.com\ce 9. Wind, snow, permanent and imposed load resistance 4 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) 11. - U-value (EN 67) 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e 14. Durability PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 462

Thermobel VIP 46

CE Marking of Insulating glass unit - EN 1279-5:2005 + A2:2010 Thermobel VIP Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Thermobel VIP, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Thermobel VIP characteristics in : AVCP 4-16-4 4-20-4 4-22-4 6-16-4 6-20-4 6-22-4 Systems (VIP 14 mm) (VIP 18 mm) (VIP 20 mm) (VIP 14 mm) (VIP 18 mm) (VIP 20 mm) 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD NPD 11. U-value (EN 67) 0,4 0, 0, 0,4 0, 0, 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 464

CE Marking of Insulating glass unit - EN 1279-5:2005 + A2:2010 Thermobel VIP Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Thermobel VIP, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Thermobel VIP characteristics in : AVCP Systems 6-16-6 6-20-6 6-22-6 6-42-6 (VIP 14 mm) (VIP 18 mm) (VIP 20 mm) (VIP 40 mm) 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD 5 (-1;-) NPD 11. U-value (EN 67) 0,4 0, 0, 0,15 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 465

CE Marking of Insulating glass unit - EN 1279-5:2005 + A2:2010 Thermobel VIP Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Thermobel VIP, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Thermobel VIP characteristics in : AVCP 4-16-4* 4-20-4* 4-22-4* 6-16-4* 6-20-4* 6-22-4* Systems (VIP 14 mm) (VIP 18 mm) (VIP 20 mm) (VIP 14 mm) (VIP 18 mm) (VIP 20 mm) * glass glued with a steel plate of 0,75 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and temperature differentials 4 NPD NPD NPD NPD NPD NPD 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 8 (-2;-5) 11. U-value (EN 67) 0,4 0, 0, 0,4 0, 0, 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 466

CE Marking of Insulating glass unit - EN 1279-5:2005 + A2:2010 Thermobel VIP Avenue Jean Monnet 4-148 Louvain-la-Neuve - Belgium Tel.: +2 - (0) 2 409.0.00 - Fax: +2 - (0) 2 672.44.62 Declare, under his sole responsibility, the following characteristics for the CE Marking of the glass products named Thermobel VIP, intended to be used in buildings and construction works, following EN 1279-5:2005 + A2:2010 NB 0074 06 0402 042 0474 0497 0589 0620 0672 0679 0749 0757 0761 08 1080 1121 116 1154 117 1174 124 114 122 14 190 191 194 196 1488 164 1694 1717 1750 1812 251 Thermobel VIP characteristics in : AVCP Systems 4*-16-4* (VIP 14 mm) 4*-20-4* (VIP 18 mm) 4*-22-4* (VIP 20 mm) 6-16-6** (VIP 14 mm) 6-20-6** (VIP 16 mm) 6-22-6** (VIP 14 mm) * glass glued with a steel plate of 0,75 mm / ** glass glued with a steel plate of 2 mm 1. Resistance to fire (EN 1501-2) 1 NPD NPD NPD NPD NPD NPD 2. Reaction to fire (EN 1501-1), 4 NPD NPD NPD NPD NPD NPD. External fire performances, 4 NPD NPD NPD NPD NPD NPD 4. Bullet resistance (EN 106) 1 NPD NPD NPD NPD NPD NPD 5. Explosion resistance (EN 1541) 1 NPD NPD NPD NPD NPD NPD 6. Burglar resistance (EN 56) NPD NPD NPD NPD NPD NPD 7. Pendulum body impact resistance (EN 12600) NPD NPD NPD NPD NPD NPD 8. Resistance against sudden temperature change and 4 NPD NPD NPD NPD NPD NPD temperature differentials 9. Wind, snow, permanent and imposed load resistance 4 NPD NPD NPD NPD NPD NPD 10. Direct airborne sound reduction (EN 12758): Rw (C;Ctr) NPD NPD NPD NPD NPD 42 (-2;-5) 11. U-value (EN 67) 0,4 0, 0, 0,4 0, 0, 12. Light transmission/reflection (EN 410): τ v / ρ v / ρ' v NPD NPD NPD NPD NPD NPD 1. - Solar transmission/reflection/factor (EN 410): τ e / ρ e / ρ' e NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD NPD 14. Durability PASS PASS PASS PASS PASS PASS 2rd of February 2015 Primary Sales & Strategic, Marketing Director, Building 467

Translations 468

English Bulgarian (български) CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light teflection Solar energy transmission Solar energy reflection Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass СЕ маркировка Характеристики Пожароустойчивост Реакция към огън Външна пожароустойчивост Куршумоустойчивост Взривоустойчивост Устойчивост на вандализъм Устойчивост на удар от двежещи се тела Устойчивост на резки температурни промени и температурни разлики Устойчивост на вятър, сняг, постоянно или временно натоварване Редукция на звуци, предавани директно по въздух Термални характеристики Емисивитет U-фактор Радиационни характеристики Светлопреминаване Отразяване на светлина Прминаване на слънчева енергия Отразяване на слънчева енергия Флоатно стъкло Орнаментно стъкло Орнаментно армирано стъло Стъкло с покритие Термично закалено флоатно безопасно стъкло Термично закалено флоатно стъкло с "heat soak" тест Топлинно заздравено флоатно стъкло Изолиращи елементи Ламинирано стъкло и ламинирано безопасно стъкло Пожароустойчиво стъкло 469

English čeština CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light reflection Solar energy transmission Solar energy reflection CE značení Vlastnosti Požární odolnost Reakce na oheň Ukazatel odolnosti proti vnějšímu požáru Odolnost proti průstřelu Odolnost proti výbuchu Odolnost proti násilnému vniknutí Odolnost proti kyvadlovému nárazu Odolnost proti náhlým změnám teploty a teplotním rozdílům Odolnost proti zatížení větrem, sněhem, trvalému a užitnému zatížení Přímá vzduchová neprůzvučnost Tepelné vlastnosti Emisivita Součinitel prostupu tepla U, Ug Světelné vlastnosti Světelný činitel prostupu Světelný činitel odrazu Činitel prostupu přímého slunečního záření Činitel odrazu přímého slunečního záření Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Základní sodnovápenatokřemičité sklo float Základní sodnovápenatokřemičité vzorované sklo Základní sodnovápenatokřemičité vzorované sklo s drátěnou vložkou Sklo s povlakem Tepelně tvrzené sodnovápenatokřemičité bezpečnostní sklo Tepelně tvrzené prohřívané sodnovápenatokřemičité bezpečnostní sklo (HST) Tepelně zpevněné sodnovápenatokřemičité sklo Izolační skla Vrstvená skla a vrstvená bezpečnostní skla Protipožární sklo 470

English Dansk CE Marking CE mærkning Characteristics Karakteristik Resistance to fire Modstand mod brand Reaction to fire Reaktion ved brand External fire performance Ekstern brandmodstand Bullet resistance Modstand mod skud Explosion resistance Modstand mod eksplosion Burglar resistance Modstand mod indbrud Pendulum body impact resistance Pendultest (personsikkerhed) Resistance against sudden temperature changes and temperature differentials Modstand mod pludselige temperatursvingninger og temperaturgradienter Wind, snow, permanent and imposed load resistance Vind-, sne- og langtidslast Direct airborne sound insulation Direkte luftbåren Lydreduktion Thermal properties Varmeisolering Emissivity Emissivitet U-value U-værdi Radiation properties Strålingsegenskaber Light transmission Sollystransmittans Light reflection Sollysreflektans Solar energy transmission Solenergitransmittans Solar energy reflection Solenergireflektans Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Kalk-soda-silikat floatglas Kalk-soda-silikat ornament glas Kalk-soda-silikat ornament trådglas Belagt glas Termisk hærdet glas Heat soaked termisk hærdet kalk-soda-silikat glas Varmeforstærket glas Termoruder Lamineret glas og lamineret sikkerhedsglas Brandbeskyttende glas 471

English Deutsch CE Marking CE Kennzeichnung Characteristics Eigenschaften Resistance to fire Feuerwiderstand Reaction to fire Brandverhalten External fire performance Verhalten bei Beanspruchungdurch Feuer von außen Bullet resistance Durchschusshemmung Explosion resistance Sprengwirkungshemmung Burglar resistance Einbruchhemmung Pendulum body impact resistance Pendelschlagwiderstand Resistance against sudden temperature changes and temperature differentials Beständigkeit gegen plötzlichetemperaturwechsel und Temperaturunterschiede Wind, snow, permanent and imposed load resistance Widerstand gegen Schnee-, Wind-, Dauerlasten bzw. sonstige Lasten Direct airborne sound insulation Direkte Luftschalldämmung Thermal properties Thermische Eigenschaften Emissivity Emissivität U-value U-Wert Radiation properties Strahlungsphysikalische Eigenschaften Light transmission Lichttransmission Light reflection Lichtreflexion Solar energy transmission Energietransmission Solar energy reflection Energiereflexion Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Gefloatetes Natronkalk-Silicatglas Ornamentglas aus Natronkalk-Silicatglas Drahtornamentglas aus Natronkalk-Silicatglas Beschichtetes Glas Thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas Heißgelagertes thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas Teilvorgespanntes Kalknatronglas Isolierglas Verbundglas und Verbundsicherheitsglas Feuerbeständiges Glas 472

English eesti keel CE Marking CE märgistus Characteristics Omadused Resistance to fire Tulekindlus Reaction to fire Põlevus External fire performance Vastupidavus välisele tulele Bullet resistance Kuulikindlus Explosion resistance Plahvatuskindlus Burglar resistance Vandalismikindlus Pendulum body impact resistance Vastupidavus pehme keha löögile (pendeltest) Resistance against sudden temperature changes and temperature differentials Vastupidavus järskudele temperatuurimuutustele ja temperatuuri erinevustele Wind, snow, permanent and imposed load resistance Vastupidavus tuule-, lume-, püsi- ja kasuskoormusele Direct airborne sound insulation Otsene õhuheli isolatsioon Thermal properties Soojuslikud omadused Emissivity Emissiivsus U-value U-väärtus Radiation properties Kiirguslikud omadused Light transmission Valguse läbivus Light reflection Valguse peegeldus Solar energy transmission Päikeseenergia läbivus Solar energy reflection Päikeseenergia peegeldus Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Lubi-liiv-floatklaas Lubi-liiv-ornamentklaas Sarrustatud Lubi-liiv-ornamentklaas Pindkattega klaas Termiliselt karastatud lubi-liiv-turvaklaas Heat soaked termiliselt karastatud lubi-liiv-turvaklaas Termiliselt tugevdatud lubiliivklaas Klaaspakett Lamineeritud klaas ja lamineeritud turvaklaas Tuletõkkeklaas 47

English ελληνικα CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light reflection Solar energy transmission Solar energy reflection Σηµα CE Χαρακτηριστικα Αντσταση στην φωτια Αντιδραση στην φωτια Επιδοση σε εξωτερικη φωτια Αντισταση σε σφαιρα Αντισταση σε εκρηξη Αντισταση σε διαρρηξη Αντισταση σε κρουση εκκρεµων αντικειµενων Αντισταση κατα ξαφνικων αλλαγων θερµοκρασιας και διαφορων θερµοκρασιων Μονιµη και επιβαλλοµενη αντισταση σε ανεµοπιεση και πιεση χιονιου Μονωση κατα απευθειας αεροµεταφεροµενου θορυβου θερµικες ιδιοτητες Εκποµπη Συντελεστης θερµοαγωγιµοτητας Ιδιοτητες ακτινοβολιας Μεταδοση φωτως Αντανακλαση φωτως Μεταδοση ηλιακης ενεργειας Αντανακλαση ηλιακης ενεργειας Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Βασικο γυαλι σοδας Βασικο εκτυπωµενο γυαλι σοδας (διαµαντε) Βασικο εκτυπωµενο γυαλι σοδας µε συρµα Επιστρωµενος υαλοπινακας Θερµικα σκληρηµενο βασικο γυαλι σοδας ασφαλειας Θερµικα εµποτισµενου σκληρηµενου βασικου γυαλιου σοδας ασφαλειας Θερµικα ενισχυµενο βασικο γυαλι σοδας ιπλοι µονωτικοι υαλοπινακες Λαµιναρισµενος υαλοπινακας και λαµιναρισµενος υαλοπινακας ασφαλειας Πυραντοχος υαλοπινακας 474

English español CE Marking Marcado CE Characteristics Características Resistance to fire Resistencia al fuego Reaction to fire Reacción al fuego External fire performance Prestaciones de comportamiento frente a fuego exterior Bullet resistance Resistencia a las balas Explosion resistance Resistencia a las explosiones Burglar resistance Resistencia a la agresión Pendulum body impact resistance Resistencia al impacto de cuerpo pendular Resistance against sudden temperature changes and temperature differentials Resistencia a variaciones bruscos de temperatura y a temperaturas diferenciales Wind, snow, permanent and imposed load resistance Reistencia a las cargas de viento y nieve, y a las cargas permanentes e impuestas Direct airborne sound insulation Aislamiento al ruido aereo directo Thermal properties Propiedades térmicas Emissivity Emisividad U-value Valor U Radiation properties Propiedades ante la radiación Light transmission Transmisión luminosa Light reflection Reflexión luminosa Solar energy transmission Transmisión de la energía solar Solar energy reflection Reflexión de la energía solar Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Vidrio flotado de base silicato sodo-cálcico Vidrio impreso de base silicato sodo-cálcico Vidrio impreso armado de base silicato sodo-cálcico Vidrio de capa Vidrio de silicato sodo-cálcico de seguridad templado térmicamente Vidrio de silicato sodo-cálcico de seguridad templado y con tratamiento Heat Soak Vidrio de silicato sodo-cálcico de seguridad termoendurecido Unidad de vidrio aislante Vidrio laminado y vidrio laminado de seguridad Vidrio resistente al fuego 475

English français CE Marking Marquage CE Characteristics Caractéristiques Resistance to fire Résistance au feu Reaction to fire Réaction au feu External fire performance Performances de comportement vis-à-vis d'un feu extérieur Bullet resistance Résistance aux balles Explosion resistance Résistances aux explosions Burglar resistance Résistance aux effractions Pendulum body impact resistance Résistance à l'impact d'un pendule Resistance against sudden temperature changes and temperature differentials Résistances aux variations brutales de température et aux températures différentielles Wind, snow, permanent and imposed load resistance Résistance aux charges dues au vent et à la neige, aux charges permanentes et imposées Direct airborne sound insulation Isolation au bruit aérien direct Thermal properties Propriétés thermiques Emissivity Emissivité U-value Coefficient U Radiation properties Propriétés de rayonnement Light transmission Transmission lumineuse Light reflection Réflexion lumineuse Solar energy transmission Transmission du rayonnement solaire Solar energy reflection Reflexion du rayonnement solaire Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Verre float de silicate sodo-calcique de base Verre imprimé de silicate sodo-calcique de base Verre imprimé armé de silicate sodo-calcique de base Verre à couche Verre de silicate sodo-calcique de sécurité trempé thermiquement Verre de silicate sodo-calcique de sécurité trempé et traité Heat Soak Verre de silicate sodo-calcique durci thermiquement Vitrage isolant préfabriqué scellé Verre feuilleté et verre feuilleté de sécurité Verre résistant au feu 476

English Italiano CE Marking Marcatura CE Characteristics Caratteristiche Resistance to fire Resistenza al fuoco Reaction to fire Reazione al fuoco External fire performance Resistenza al fuoco proveniente dall esterno Bullet resistance Resistenza ai proiettile Explosion resistance Resistenza all' esplosione Burglar resistance Resistenza agli attacchi manuali Pendulum body impact resistance Resistenza agli urti (Prova del pendolo) Resistance against sudden temperature changes and temperature differentials Resistenza agli sbalzi improvvisi di temperatura e alle differenze di temperatura Wind, snow, permanent and imposed load resistance Resistenza a carichi di vento, neve e ai carichi permanti Direct airborne sound insulation Isolamento al rumore aereo diretto Thermal properties Proprietà termiche Emissivity Emissività U-value Valore U Radiation properties Proprietà di irraggiamento Light transmission Trasmissione luminosa Light reflection Riflessione luminosa Solar energy transmission Solar energy reflection Trasmissione energetica diretta Riflessione energetica Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Prodotti di base di vetro di silicato sodo-calcico Vetro float Prodotti di base di vetro di silicato sodo-calcico Vetro stampato Prodotti di base di vetro di silicato sodo-calcico Vetro stampato armato Vetri rivestiti Vetro di silicato sodo-calcico di sicurezza temprato termicamente Vetro di silicato sodo-calcico di sicurezza temprato e trattato Heat Soak Vetro di silicato sodo-calcico di indurito termicamente Vetrate isolanti Vetro stratificato e vetro stratificato di sicurezza Vetro resistente al fuoco 477

English latviešu valoda CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light teflection Solar energy transmission Solar energy reflection Eiropas Padomes(EP) Marķējums Raksturīgās īpašības Ugunsizturīgs Reaģē ar uguni Ārējās uguns veiktspēja(izolācijas spēja) Ložu necaurlaidīgs Izturīgs pret eksploziju Izturīgs pret ielaušanos un huligānismu Izturīgs pret krītošu ķermeņu triecienu Izturīgs pret krasām temperatūras svārstībām un temperatūras atšķirībām Iztur vēja, sniega, pastāvīgas un īslaicīgas(pēkšņas) slodzes. Tiešu aviācijas trokšņu izolācija Termiskās īpašības Caurstarojums Siltumcaurlaidības koeficienta U vērtība. Starojuma īpašības Gaismas caurlaidība Gaismas atstarošana Saules enerģijas caurlaidība Saules enerģijas atstarošana Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Nātrija-kalcija silikātu float stikls Nātrija-kalcija silikātu dekoratīvais stikls Nātrija-kalcija silikātu dekoratīvais stikls ar stiegrojumu Pārklāts stikls Termiski rūdīts nātrija-kalcija silikātu drošības stikls Karstumā testēts (Heat-Soak test) termiski rūdīts nātrija-kalcija silikātu drošības stikls Termiski stiprināts nātrija-kalcija silikātu drošības stikls Stikla pakete Laminēts stikls un laminēts aizsargstikls Ugunsizturīgs stikls 478

English lietuviu kalba CE Marking CE žymejimas Characteristics Charakteristikos Resistance to fire Atsparumas ugniai Reaction to fire Sąveika su ugnimi External fire performance Išorinės ugnies charakteristikos Bullet resistance Atsparumas šūviams Explosion resistance Atsparumas sprogimams Burglar resistance Atsparumas įsilaužimams Pendulum body impact resistance Atsparumas kintančiam kūnų poveikiui Resistance against sudden temperature changes and temperature differentials Atsparumas staigiam temperatūrų pasikeitimui ir temperatūrų skirtumams Wind, snow, permanent and imposed load resistance Atsparumas vėjo, sniego, pastovioms ir staigioms apkrovoms Direct airborne sound insulation Oru sklindančio garso izoliacija Thermal properties Šiluminės savybės Emissivity Emisija U-value U-reikšmė, šiluminio pralaidumo koeficientas Radiation properties Radiacinės savybės Light transmission Šviesos pralaidumas Light reflection Šviesos atspindėjimas Solar energy transmission Saulės energijos perdavimas Solar energy reflection Saulės energijos atspindėjimas Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Plokščias kalcio natrio silikatinis stiklas Raštuotas kalcio natrio silikatinis stiklas Armuotas raštuotas kalcio natrio silikatinis stiklas Stiklas su danga Termiškai grūdintas kalcio natrio silikatinis stiklas Termiškai grūdintas ir karščiu (HST) testuotas sagus kalcio natrio silikatinis stiklas Karščiu sustiprintas kalcio natrio silikatinis stiklas Stiklo paketas Laminuotas stiklas ir saugus laminuotas stiklas Ugniai atsparus stiklas 479

English Magyar CE Marking CE-jelölés Characteristics tulajdonságok Resistance to fire tűzállóság Reaction to fire éghetőség External fire performance jellemzők kültéri tűz esetén Bullet resistance golyóállóság Explosion resistance robbanás-ellenállás Burglar resistance betörés- ellenállás Pendulum body impact resistance ingaütés-ellenás Resistance against sudden temperature changes and temperature differentials ellenállás a hirtelen hőmérsékletváltozásnak és nagy mértékű hőmérésklet különbségnek Wind, snow, permanent and imposed load resistance szél, hó, folytonos és ráhelyezett teherbírás Direct airborne sound insulation direkt léghanggátlás Thermal properties thermikus tulajdonságok Emissivity emisszivitás U-value U-érték Radiation properties sugárzás Light transmission fényáteresztés Light teflection fényvisszaverés Solar energy transmission energia áteresztés Solar energy reflection energia visszaverés g-value g-érték Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass float üveg katedrál üveg drót üveg bevonatos üveg edzett üveg "heat-soak" teszttel edzett biztonsági üveg előfeszített üveg hőszigetelő üveg ragasztott és ragasztott biztonsági üveg tűzálló üveg 480

English Nederlands CE Marking CE markering Characteristics Karakteristieken Resistance to fire Brandwering Reaction to fire Reactie op brand External fire performance Gedrag ten opzichte van uitwendige vuurhaard Bullet resistance Kogelwering Explosion resistance Explosiewering Burglar resistance Inbraakwering Pendulum body impact resistance Slingerproefweerstand Resistance against sudden temperature changes and temperature differentials Weerstand tegen plotse temperatuursverandering en temperatuursverschillen Wind, snow, permanent and imposed load resistance Weerstand tegen wind-, sneeuw- en permanente belasting Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light reflection Solar energy transmission Solar energy reflection Directe luchtgeluidisolatie Thermische eigenschappen Emissiviteit U-waarde Stralingseigenschappen Lichttransmissie Lichtreflectie Zontoetreding Zonreflectie Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Basisnatronkalk floatglas Basisnatronkalk figuurglas Basisnatronkalk figuurdraadglas Gecoat glas Thermisch gehard natronkalkveiligheidsglas Thermisch gehard natronkalk veiligheidsglas met heat soak test Thermisch versterkt natronkalkglas Isolerend dubbel glas (IDG) Gelaagd glas en gelaagd veiligheidsglas Brandwerend glas 481

English Norks CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light reflection Solar energy transmission Solar energy reflection CE merking Betegnende Brannhemmende Reaksjon mot brann Ekstern brannmotstand Skuddhemmende Eksplosjonshemmende Innbruddshemmende Pendultest(personsikkerhet) Motstand mot plutselige tempratursvingninger og tempraturforskjeller Vind-,Snø- og varig ilagt belastningsmotstand Direkte luftbåren lydisolasjon Isoleringsegenskaper Emissivitet U-Verdi Strålingsegenskaper Sollys transmisjon Sollys refleksjon Solenergi transmisjon Solenergi refleksjon Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Kalk-soda-silikat floatglass Kalk-soda-silikat ornament glass Kalk-soda-silikat ornament trådglass Belagt glass Termisk herdet glass Heat soaked termisk herdet kalk-soda-silikat glass Varmeforsterket glass Isoler glass Laminert glass og laminert sikkerhetsglass Brannbeskyttende glass 482

English polski CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light reflection Solar energy transmission Solar energy reflection Oznakowanie CE Właściwości Odporność na ogień Reakcja na ogień Zachowanie w przypadku pożaru Odporność na uderzenie pocisku Odporność na siłę eksplozji Odporność na włamanie Odporność na uderzenie wahadłem Odpoprność na nagłe zmiany temperatury oraz różnice temperatur Odporność na siłę wiatru, napór śniegu oraz stałe i przyłożone obciążenia Izolacja akustyczna Właściwości termiczne Emisyjność Współczynnik U Właściwości w zakresie promieniowania Przepuszczalność światła Odbicie światła Przepuszczalność energii promieniowania słonecznego Odbicie energii promieniowania słonecznego Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Podstawowe wyroby ze szkła float sodowo-wapniowo-krzemianowego Podstawowe wyroby ze szkła wzorzystego walcowanego sodowo-wapniowo-krzemianowego Podstawowe wyroby ze szkła wzorzystego zbrojonego sodowo-wapniowo-krzemianowego Szkło powlekane Termicznie hartowane bezpieczne szkło sodowo-wapniowo-krzemianowe Wygrzewane termicznie hartowane bezpieczne szkło sodowo-wapniowo-krzemianowe Cieplnie wzmocnione szkło sodowo-wapniowo-krzemianowe Szyby zespolone izolacyjne Szkło warstwowe i bezpieczne szkło warstwowe Szkło ognioodporne 48

English Romanian CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light reflection Solar energy transmission Solar energy reflection marcaj CE caracteristici rezistenta la foc reactia la foc comportare la un foc exterior rezistenta la glont rezistenta la explozie rezistenta la efractie rezistenta la impactul cu un pendul rezistenta la variatii bruste de temperatura si la diferente de temperatura rezistenta la incarcari datorate vantului si zapezii si la incarcari permanente si impuse atenuare fonica - izolare la zgomot aerian proprietati termice emisivitate valoare U proprietati de radiatie transmisia luminii reflexia luminii transmisia energiei solare reflexia energiei solare Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass sticla float calco-sodica sticla ornament calco-sodica sticla armata calco-sodica sticla cu pelicula sticla calco-sodica,de siguranta, securizata sticla calco-sodica, de siguranta, securizata, cu efectuarea testului de depistare a sulfurii de nichel sticla calco-sodica, calita (semi-securizata) vitraj izolant sticla stratificata, sticla stratificata de siguranta sticla rezistenta la foc 484

English português CE Marking Characteristics Resistance to fire Resistência ao fogo Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties U-value Light transmission Light reflection Solar energy transmission Solar energy reflection Reacção ao fogo Prestações de comportamento frente ao fogo exterior Resistência a bala Resistência a explosão Resistência a agressão Resistência ao impacto do corpo pendular Resistência as variações bruscas de temperatura e diferenciais termicos Resistência á pressão do vento e neve e ás cargas permanentes impostas Isolamento ao ruído aéreo directo Propriedades térmicas Coeficiente Ug Transmissão luminosa Reflexão luminosa Transmissão da energia solar Reflexão da energia solar Basic soda lime silicate float glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Vidro á base de silico-sódico calcio Vidro de capa Vidro de segurança temperado Vidro de segurança temperado e com tratamento Heat Soak Test Vidro termo-endurecido Unidade de vidro duplo Vidro laminado e vidro laminado de segurança 485

English slovenčina CE Marking Označenie CE Characteristics Vlastnosti Resistance to fire Odolnosť voči ohňu Reaction to fire Reakcia na oheň External fire performance Správanie sa voči vonkajšiemu ohňu Bullet resistance Nepriestrelnosť Explosion resistance Odolnosť voči výbuchu Burglar resistance Odolnosť voči vlámaniu Pendulum body impact resistance Odolnosť voči nárazu kyvadla Resistance against sudden temperature changes and temperature differentials Odolnosť voči náhlym teplotným zmenám a teplotným rozdielom Wind, snow, permanent and imposed load resistance Odolnosť voči vetru, snehu a trvalému a náhodilému zaťaženiu Direct airborne sound insulation Priama vzduchová nepriezvučnosť Thermal properties Tepelné vlastnosti Emissivity Emisivita U-value K-hodnota Radiation properties Vlastnosti ohľadom žiarenia Light transmission Prestup svetla Light reflection Odraz svetla Solar energy transmission Prestup slnečného žiarenia Solar energy reflection Odraz slnečného žiarenia Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Základné plavené sodnovápenatokremičité sklo Základné sodnovápenatokremičité vzorované sklo Základné sodnovápenatokremičité vzorované sklo s drôtenou vložkou Sklo s povlakom Tepelne tvrdené sodnovápenatokremičité bezpečnostné sklo Prehrievané tepelne tvrdené sodnovápenatokremičité bezpečnostné sklo Tepelne spevnené sodnovápenatokremičité sklo Jednotky izolačného skla Laminované sklo a laminované bezpečnostné sklo Protipožiarne sklo 486

English slovenščina CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light teflection Solar energy transmission Solar energy reflection g-value CE označevanje Lastnosti Ognjeeodpornost Obnašanje med požarom Obnašanje med zunanjim požarom Odpornost pred streli Odpornost pred eksplozijo Odpornost na vlome Odpornost na preiskus z nihalom Odpornost na nenadne temperaturne spremembe in na razlike v temperaturah Odpornost na nenadne temperaturne spremembe in na razlike v temperaturah Direktna zvočna izolirnost Toplotne lastnosti Sevanje U - vrednost Sevalno tehnične lastnosti Prepustnost svetlobe Odbojnost svetlobe Prepustnost energije odbojnost energije g-vrednost Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Ravno steklo iz natrijsilikatnega stekla Vzorčasto steklo iz natrijsilikatnega stekla Žično vzorčasto steklo iz natrijsilikatnega stekla Steklo z nanosi Kaljeno steklo iz natrij-kalcij silikatnega stekla Kaljeno steklo s toplotnim preiskusom iz natrij-kalcij silikatnega stekla Toplotno utrjeno steklo iz natrij-kalcij silikatnega stekla Izolacijski stekleni elementi Lepljeno in varnostno lepljeno steklo Ognjeodporno steklo za uporabo v gradbeništvu 487

English suomi CE Marking CE-merkintä Characteristics Erityistuntomerkit Resistance to fire Palon kestävä Reaction to fire Paloa pidättävä External fire performance Paloa hidastava Bullet resistance Luodinuojaus Explosion resistance Räjähdyksensuojaus Burglar resistance Murronsuojaus Pendulum body impact resistance Suojaus henkilön törmäystä vastaan Resistance against sudden temperature changes and temperature differentials Suojaus äkillistä lämpötilanmuutosta ja lämpötilagradientteja vastaan Wind, snow, permanent and imposed load resistance Suojaus tuulikuormaa, lumikuormaa, pysyvää kuormaa jahyötyuormaa vastaan Direct airborne sound insulation Suoran ilmaääneen eristys Thermal properties Lämmöneristys Emissivity Emissiivisyys U-value U-arvo Radiation properties Säteilyn suojaus Light transmission Valonläpäisy Light reflection Valonheijastus Solar energy transmission Auringon lämpösäteilyn kokonaisläpäisy Solar energy reflection Auringon lämpösäteilyn heijastus Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Natronkalkkisilikaattitasolasi Natronkalkkisilikaatti koristelasi Kuvioitu natronkalkkisilikaattirautalankalasi Pinnoitelasi Lämpökarkaistu natronkalkkisilikaattiturvalasi Heat soak testattu karkaistu natronkalkkisilikaattiturvalasi Lämpölujitettu natronkalkkisilikaattiturvalasi Eristyslasiyksiköt Laminoitu lasi ja laminoitu turvalasi Palonsuojalasi 488

English svenska CE Marking Characteristics Resistance to fire Reaction to fire External fire performance Bullet resistance Explosion resistance Burglar resistance Pendulum body impact resistance Resistance against sudden temperature changes and temperature differentials Wind, snow, permanent and imposed load resistance Direct airborne sound insulation Thermal properties Emissivity U-value Radiation properties Light transmission Light reflection Solar energy transmission Solar energy reflection CE-märkning Karaktäristik Motstånd mot brand Reaktion vid brand Externt brandmotstånd Motstånd mot projektiler Säkerhet vid explosion Motstånd mot inbrott Pendelprov (personsäkerhet) Motstånd mot plötsliga temperatursvängningar och temperaturgradienter Vind-, snö-, permanent/tillfällig belastning. Ljudisolering Värmeisolering Emissivitet U-värde Strålningsegenskaper Ljustransmission Ljusreflektion Solenergi transmission Solenergi reflektion Basic soda lime silicate float glass Basic soda lime silicate patterned glass Basic soda lime silicate wired patterned glass Coated glass Thermally toughened soda lime silicate safety glass Heat soaked Thermally toughened soda lime silicate safety glass Heat strengthened soda lime silicate glass Insulating glass units Laminated glass and laminated safety glass Fire resistant glass Kalk-sodasilikatglas,floatglas Kalk-sodasilikatglas, mönstrat glas Kalk-sodasilikatglas, mönstrat trådglas Belagt glas Termiskt härdat glas Heat soak testat termiskt härdat kalk-sodasilikatglas Värmeförstärkt kalk-sodasilikatglas Isolerglas Suédois Brandskyddsglas 489