Product Information Project Name Catalog Number RJT Type Date SPECIFICTIONS Features The RJT is a direct replacement for fluorescent troffers and offers the right options for versatility of use across a wide range of project types. Choice of four lumen packages and dimming option available. Same LED door styles, lens types and mounting for 1x4, 2x2 or 2x4 configurations. Long-life, LEDs at L80 (80% lumen maintenance) at 60,000 hours to reduce life cycle maintenance costs. Optional emergency battery backup for safety lighting. vailable in 1'x4', 2'x2' and 2'x4'. Up to 145 lumens per watt. Color Rendering Index (CRI) > 80. Multiple shielding options. Construction Fixture housing, end caps, and reflectors are die-formed code-gauged cold-rolled steel Hinged optical system allows easy access to LED modules and electrical from below the ceiling Multiple shielding options. Certain airborne contaminants can diminish integrity of acrylic. Contact factory for chemical compatibility. Metal to metal light leak protection on all four sides of shielding frame Two door frame choices Weight: 1x4-8 lbs. 2x2-7 lbs. 2x4-10 lbs. Electrical Input Voltage Range: 120-277 VC Nom. Frequency: 50/60 Hz Nom. ctive Power Factor Correction Power Factor: >0.90 @ full load, 120V through 277V Harmonic Distortion: THD < 20% @ full load Protection: Over-Voltage, Over-Temperature (110º) & Short Circuit Compliant to FCC Part 15 requirements for EMI/RFI emissions NEC/CEC compliant ballast disconnect is standard. Optional emergency battery pack CERTIFICTION Certifications CS listed for Canada and U.S. Tested to UL 1598 & UL 8750 standards. Luminaires bear appropriate listing labels. Emergency-equipped fixtures labeled UL 924. dheres to LM79, LM80 and TM21 industry standards. DesignLights Consortium (DLC) qualified. Please refer to the DLC website for specific product qualifications at www.designlights.org. Please refer to the Lighting Facts website for specific product qualifications at www.lightingfacts.com. pplication Suitable for use with most wired or wireless lighting control systems Suitable for dry & damp locations: Government buildings Commercial areas Educational facilities Warranty Five-year warranty. (Terms and Conditions pply) Retail Healthcare facilities ORDERING INFORMTION RJT MODEL RJT LED Lensed Troffer Fixture SIZE 14 1x4 Nominal 22 2 2 Nominal 24 2x4 Nominal XW Extra Low Watt (1x4, 2x4) VW Very Low Watt MW Medium Low Watt LW Low (2x4 Only) Page 1/7 - Revised: 10/31/16 Created: 2016 EXMPLE RJT22-35HLG-FS12F-EU U COLOR TEMP 30 3000K 35 3500K 40 4000K 50 5000K LUMEN OUTPUT ML Medium (2x2, 2x4) HL High (2x2,2x4) VL Very High (2x2, 2x4) XL Extra High Lumen (2x4 Only) CEILING TYPE G Grid 1 SM Surface Mount DOOR FS White Flush Steel F White Flush luminum SHIELDING 12 Pattern 12 crylic Lens 12125 Pattern 12 crylic Lens, 0.125" Nominal 12F Pattern 12 Frosted crylic Lens 12F125 Pattern 12 Frosted crylic Lens, 0.125" Nominal 19 Pattern 19 crylic Lens, 0.156" Nominal 19F Pattern 19 Frosted crylic Lens 0.156" DRIVER OUTPUT E Fixed ESD Bi-Level 2 ED 0-10V Dimming 3 DRIVER VOLTGE U Universal 120/277 VC FOOTNOTES OTHER ELL14 Emergency Battery Pack 4 C388 3-Wire Flex, 6', 18 Ga C488 4-Wire Flex, 6', 18 Ga C588 5-Wire Flex, 6', 18 Ga CCESSORIES (ORDER SEPRTELY) FK14 1'x 4' Single Flange Kit FK22 2'x 2' Single Flange Kit FK24 2' 4' Single Flange Kit 1. For hard ceilings use flange kit accessory (order separately). 2. Bi-Level driver must be controlled by sensor or /B switching. 3. Must be used in conjunction with lighting controls. 4. Not available with surface mount.
PHOTOMETRIC DT PHOTOMETRIC DT: RJT14-40ML-XX12-EDU ll published luminaire photometric testing performed to IESN LM-79-08 standards by a NVLP certified lab. LUMINIRE DT ENERGY DT INDOOR CNDEL PLOT Test: 16363 Test Date: 07/08/16 Luminaire RJT14-40MLG-FS12-EU RJT LED, Lensed Troffer 1' X 4' LED with 12 pattern acrylic prismed lens Ballast XI054C150V054BST1 Ballast Factor 1.00 Lamp LED Fixture Lumens 4223 Watts 39 Recessed Shielding ngle 0 = 90 90 = 90 Spacing Criterion 0 = 1.11 90 = 1.11 Luminous Opening in feet Length: 3.92 Width: 0.83 Height: 0.00 Total Luminaire Efficiency 100.0% Total Lumens per Watt 111 NSI/IESN RP-1-2004 Noncompliant Compliance Comparative Yearly Lighting $2.16 based on Energy Cost per 1000 Lumens 3000 hrs. and $0.08 per KWH ZONL LUMEN SUMMRY Zone Lumens %Lamp %Fixt 0-30 1538 36.4 36.4 0-40 2389 56.6 56.6 0-60 3623 85.8 85.8 0-90 4223 100 100 0-180 4223 100.0 100.0 PHOTOMETRIC DT: RJT22-35MLG-FS12-EDU ll published luminaire photometric testing performed to IESN LM-79-08 standards by a NVLP certified lab. LUMINIRE DT ENERGY DT INDOOR CNDEL PLOT Test: 16381 Test Date: 07/13/2016 Luminaire RJT22-40MLG-FS12-EU RJT LED, Lensed Troffer 2' X 2' LED with 12 pattern acrylic prismed lens Ballast XI040C110V054BST1 Ballast Factor 1.00 Lamp LED Fixture Lumens 3419 Watts 31 Recessed Shielding ngle 0 = 90 90 = 90 Spacing Criterion 0 = 1.14 90 = 1.20 Luminous Opening in feet Length: 1.92 Width: 1.92 Height: 0.00 Total Luminaire Efficiency 100.0% Total Lumens per Watt 109 NSI/IESN RP-1-2004 Noncompliant Compliance Comparative Yearly Lighting $2.18 based on Energy Cost per 1000 Lumens 3000 hrs. and $0.08 per KWH ZONL LUMEN SUMMRY Zone Lumens %Lamp %Fixt 0-30 1209 35.3 35.3 0-40 1903 55.7 55.7 0-60 2930 85.7 85.7 0-90 3419 100.0 100.0 0-180 3419 100.0 100.0 PHOTOMETRIC DT: RJT24-35MLG-FS12-EDU ll published luminaire photometric testing performed to IESN LM-79-08 standards by a NVLP certified lab. LUMINIRE DT ENERGY DT INDOOR CNDEL PLOT Test: 16402 Test Date: 06/27/2016 Luminaire RJT24-40MLG-FS12-EU RJT LED, Lensed Troffer 2' X 4' LED with 12 pattern acrylic prismed lens Ballast XI040C110V054BST1 Ballast Factor 1.00 Lamp LED Fixture Lumens 4792 Watts 38 Recessed Shielding ngle 0º = 90 90º = 90 Spacing Criterion 0º = 1.19 90º = 1.19 Luminous Opening in feet Length: 3.81 Width: 1.80 Height: 0.00 Total Luminaire Efficiency 100.0% Total Lumens per Watt 125 NSI/IESN RP-1-2004 Noncompliant Compliance Comparative Yearly Lighting $1.90 based on Energy Cost per 1000 Lumens 3000 hrs. and $0.08 per KWH ZONL LUMEN SUMMRY Zone Lumens %Lamp %Fixt 0-30 1609 33.6 33.6 0-40 2562 53.5 53.5 0-60 4069 84.9 84.9 0-90 4792 100.0 100.0 0-180 4792 100.0 100.0 Page 2/7 - Revised: 10/31/16 Created: 2016
LUMEN PCKGE OPTIONS RJT14 Lumens Input Watts LPW RJT14-50XWG-FS12-EU 2568 20 127 RJT14-40XWG-FS12-EU 2358 20 116 RJT14-35XWG-FS12-EU 2322 20 114 RJT14-30XWG-FS12-EU 2255 20 111 RJT14-50VWG-FS12-EU 3232 27 121 RJT14-40VWG-FS12-EU 2968 27 111 RJT14-35VWG-FS12-EU 2923 27 109 RJT14-30VWG-FS12-EU 2838 27 106 RJT14-50MWG-FS12-EU 3794 31 124 RJT14-40MWG-FS12-EU 3484 31 114 RJT14-35MWG-FS12-EU 3430 31 112 RJT14-30MWG-FS12-EU 3331 31 109 RJT14-50LWG-FS12-EU 4164 34 122 RJT14-40LWG-FS12-EU 3824 34 112 RJT14-35LWG-FS12-EU 3766 34 110 RJT14-30LWG-FS12-EU 3656 34 107 RJT14-50MLG-FS12-EU 4598 38 120 RJT14-40MLG-FS12-EU 4222 38 111 RJT14-35MLG-FS12-EU 4158 38 109 RJT14-30MLG-FS12-EU 4037 38 106 RJT14-50HLG-FS12-EU 5264 45 117 RJT14-40HLG-FS12-EU 4834 45 107 RJT14-35HLG-FS12-EU 4761 45 106 RJT14-30HLG-FS12-EU 4622 45 102 RJT14-50VLG-FS12-EU 7179 59 122 RJT14-40VLG-FS12-EU 6593 59 112 RJT14-35VLG-FS12-EU 6492 59 110 RJT14-30VLG-FS12-EU 6303 59 107 Page 3/7 - Revised: 10/31/16 Created: 2016
LUMEN PCKGE OPTIONS RJT22 Lumens Input Watts LPW RJT22-50VWG-FS12-EU 1572 13 120 RJT22-40VWG-FS12-EU 1443 13 110 RJT22-35VWG-FS12-EU 1421 13 108 RJT22-30VWG-FS12-EU 1380 13 105 RJT22-50MWG-FS12-EU 2130 18 117 RJT22-40MWG-FS12-EU 1956 18 107 RJT22-35MWG-FS12-EU 1926 18 106 RJT22-30MWG-FS12-EU 1870 18 103 RJT22-50LWG-FS12-EU 2741 24 116 RJT22-40LWG-FS12-EU 2517 24 106 RJT22-35LWG-FS12-EU 2479 24 105 RJT22-30LWG-FS12-EU 2407 24 102 RJT22-50MLG-FS12-EU 3722 31 119 RJT22-40MLG-FS12-EU 3419 31 109 RJT22-35MLG-FS12-EU 3365 31 108 RJT22-30MLG-FS12-EU 3267 31 104 RJT22-50HLG-FS12-EU 4074 33 125 RJT22-40HLG-FS12-EU 3743 33 114 RJT22-35HLG-FS12-EU 3684 33 113 RJT22-30HLG-FS12-EU 3577 33 109 RJT22-50VLG-FS12-EU 4718 42 113 RJT22-40VLG-FS12-EU 4334 42 104 RJT22-35VLG-FS12-EU 4265 42 103 RJT22-30VLG-FS12-EU 4142 42 100 Page 4/7 - Revised: 10/31/16 Created: 2016
LUMEN PCKGE OPTIONS RJT24 Lumens Input Watts LPW RJT24-50XWG-FS12-EU 2919 20 145 RJT24-40XWG-FS12-EU 2681 20 133 RJT24-35XWG-FS12-EU 2640 20 131 RJT24-30XWG-FS12-EU 2563 20 127 RJT24-50VWG-FS12-EU 3806 27 142 RJT24-40VWG-FS12-EU 3495 27 130 RJT24-35VWG-FS12-EU 3441 27 128 RJT24-30VWG-FS12-EU 3341 27 125 RJT24-50MWG-FS12-EU 4297 31 140 RJT24-40MWG-FS12-EU 3946 31 129 RJT24-35MWG-FS12-EU 3886 31 127 RJT24-30MWG-FS12-EU 3772 31 123 RJT24-50LWG-FS12-EU 4720 34 139 RJT24-40LWG-FS12-EU 4334 34 127 RJT24-35LWG-FS12-EU 4268 34 126 RJT24-30LWG-FS12-EU 4144 34 122 RJT24-50MLG-FS12-EU 5218 38 136 RJT24-40MLG-FS12-EU 4792 38 125 RJT24-35MLG-FS12-EU 4718 38 123 RJT24-30MLG-FS12-EU 4581 38 119 RJT24-50HLG-FS12-EU 6017 45 133 RJT24-40HLG-FS12-EU 5526 45 122 RJT24-35HLG-FS12-EU 5441 45 120 RJT24-30HLG-FS12-EU 5286 45 117 RJT24-50VLG-FS12-EU 8191 59 138 RJT24-40VLG-FS12-EU 7522 59 127 RJT24-35VLG-FS12-EU 7407 59 125 RJT24-30VLG-FS12-EU 7192 59 121 RJT24-50XLG-FS12-EU 9763 73 134 RJT24-40XLG-FS12-EU 8966 73 123 RJT24-35XLG-FS12-EU 8829 73 121 RJT24-30XLG-FS12-EU 8571 73 117 *Lumen values shown are initial delivered lumens tested at 25 C per IES LM-79 standards. Page 5/7 - Revised: 10/31/16 Created: 2016
FIXTURE DIMENSIONS RJT 1X4 CROSS SECTION 1/2" 1X4 TOP VIEW 225 8" 225 8" 15" 15" Ø 13/16" 1/4" 4.8125" 12" 33 4" 33 4" 481 16" 2X4 CROSS SECTION 2X2 CROSS SECTION 3.125" 4.250" 24" 2X4 TOP VIEW 24" 2X2 TOP VIEW 48" 24" 4.500" 3" 3.15625" 3" 4.250" K 3.09375" K 16.500" - 7/8" Diameter Knockout K- 2"x 3" through hole for access plate - 7/8" Diameter Knockout K- 2"x 3" through hole for access plate *Drawings N.T.S. Page 6/7 - Revised: 10/31/16 Created: 2016
SURFCE MOUNT DIMENSIONS 2.875" 7/8" Feed KO 1X4 DIMENSIONS 43" 2.875" 5.25" 9.5" 2X4 DIMENSIONS 2X2 DIMENSIONS 44.625" 4.750" Holes: (4) 1/4"-1/2" DI KOs 5.5625" 21.625" Holes: (4) 1/4"-1/2" DI KOs 12.375" 12.375" 14" 15" 1 ½" Thru Hole 4 1/2" x 5" Collar (SM). 12.375" 1 ½" Thru Hole 4 1/2" x 5" Collar (SM). 5" *Drawings N.T.S. CEILING COMPTIBILITY TYPE G FLNGE KIT End Side End Side For lay-in installation in exposed grid ceilings. Maximum tee widths of 1" and maximum tee heights of 2" allowed. For hard ceiling applications order flange kit. Flange kit wires directly into concealed ceiling opening for a clean, finished appearance. *Drawings N.T.S. Page 7/7 - Revised: 10/31/16 Created: 2016