Submersible drainage and sludge pumps made of stainless steel for mines, processing industries and salt-water applications. Drainage pumps: Minette Major Master Sludge pumps: Salvador Senior Sandy 6 Hz
Drainage and sludge pumps for corrosive applications INOX is a completely new series of electrical submersible drainage and sludge pumps made of acid-proof stainless steel. This enables the pumps to operate in applications that would destroy aluminum pumps in matter of weeks or even days. The INOX pumps are designed to meet the tough requirements from mines, coal power plants and other worksites that deal with corrosive water and sludge. The INOX pumps are also ideal in applications where saltwater is pumped, like shipyards, construction works in harbors and offshore projects. All casted parts in the pumps are made of acid-proof stainless steel. These pumps can be equipped with zinc anodes for extra protection. Since the INOX pumps are corrosion proof, they have longer lifetime and higher durability in corrosive environments. All INOX pumps can handle ph values from 2-1.
Translating user requirements into product features Grindex has supplied mines, constructions sites, quarries and other demanding industries with durable and reliable pumps for some 5 years. The INOX pumps allow other markets to discover trouble-free dewatering. The six pumps in the range have an output of 2-1kW and cover almost any application within building and construction, mining, quarries and tunneling as well as municipal and other demanding industries. The new pumps are designed to dramatically reduce operational costs. Dependability you can rely on The INOX pumps offer all the benefits you have come to expect from Grindex pumps. Reliability thanks to: - Air valve that cools the pump should it run dry. - SMART motor protection system, protects the pump from damage caused by different power failures. All in the head: - Built-in start equipment in almost all pumps, no need of external start equipment. Grindex Trouble-free dewatering Air valve Cools the pump should it run dry Built-in start equipment Plug and pump Master in action Sandy in action
Drainage and sludge pumps for corrosive applications A drainage pump (Minette INOX Master INOX) is designed for pumping: Water with particles in suspensions up to the size of the strainer holes. The particles may be abrasive. A sludge pump (Salvador INOX Sandy INOX) is designed for pumping: Water with high content of solids up to the size of the pump inlet opening diameter. Water which contain abrasive particles Different types of mud and sludge Light slurry 1 2 3 4 5 6 7 8 This is what makes our stainless steel pumps unique 1 Steel parts of stainless steel All steel parts are made of stainless steel. This gives a ph handling of 2-1, as well as capabilities to handle salt-water. 2 SMART motor protection Protects the pump from damage caused by different power failures 3 Air valve Cools the pump should it run dry 4 Outer casing in corrugated stainless steel Handles rough treatment 5. Aquatite INOX - Double mechanical shaft seals Double mechanical shaft seals with an oil compartment between the seals 6. Stainless steel impeller The casted acid-proof stainless steel impeller ensures pumping capacities in corrosive fluids. 7. Adjustable diffusers (drainage pumps) The diffusers are adjustable to maintain optimum pumping performance. 8. Rubber lined pump housing (sludge pumps) Highly abrasive-resistant, oilresistant rubber lined pump housing offers a longer life.
DRAINAGe pumps Accessories Zinc anodes Low suction collar Float switch Tandem connection Shaft seals Double mechanical shaft seals with an oil compartment between the seals Material lower seal: Silicon carbide - silicon carbide Material upper seal: Carbon - silicon carbide Materials Casted parts: Stainless steel (ASTM CF-8M) Outer casing: Stainless steel (AISI 316L) Motor shaft: Stainless steel (AISI 329) Impeller: Stainless steel (ASTM CF-8M) Screws & Nuts: Stainless steel (A4) O-rings: Viton rubber Diffusers: Nitrile rubber Water specifications Limitations Max. liquid temperature: 4 C Max. liquid density: 11 kg/m 3 ph of the liquid: 2-1* *(Dependent on temperature, consult factory) SluDGe pumps Accessories Zinc anodes Float switch Shaft seals Double mechanical shaft seals with an oil compartment between the seals Material lower seal: Silicon carbide - silicon carbide Material upper seal: Carbon - silicon carbide Materials Casted parts: Stainless steel (ASTM CF-8M) Outer casing: Stainless steel (AISI 316L) Motor shaft: Stainless steel (AISI 329) Impeller: Stainless steel (ASTM CF-8M) Screws & Nuts: Stainless steel (A4) O-rings: Viton rubber Pump housing: Nitrile rubber Water specifications Limitations Max. liquid temperature: 4 C Max. liquid density: 11 kg/m 3 ph of the liquid: 2-1* *(Dependent on temperature, consult factory) Specifications can be changed without notice. Specifications can be changed without notice.
DRAINAGe pumps: MINeTTe MASTeR MINeTTe INOX Discharge connection 3 5 4 16 14 12 ISO 996/A Rated power Max power consumption Shaft speed Rated current at 46 V 2.3 kw 2.7 kw 332 RPM 3.4 A 3 2 1 1 8 6 4 2 5 1 15 2 535 mm 24 mm Maximum solid size: 7,5 mm 41 kg 5 1 15 2 25 3 295 mm MAjOR INOX 16 5 ISO 996/A N H Discharge connection 4 3 Rated power 6.7 kw 6.7 kw Max power consumption 6. kw 6.4 kw Shaft speed 34 RPM 34 RPM Rated current at 46 V 8.7 A 9.2 A 14 12 1 8 6 4 2 4 H 3 2 N 1 1 2 3 4 5 1 2 3 4 5 6 7 792 665 mm 28 mm 33 mm Maximum solid size: 8,5 mm 65 kg MASTeR INOX N H Discharge connection 4 3 Rated power 9.7 kw 9.7 kw 25 2 15 1 8 7 6 5 4 3 H ISO 996/A 72 mm Maximum solid size: 8,5 mm Max power consumption 11 kw 11 kw Shaft speed 34 RPM 34 RPM Rated current at 46 V 15 A 15 A 5 2 N 1 1 2 3 4 5 6 7 2 4 6 8 1 28 mm 33 mm N: 77 kg H: 81 kg
SluDGe pumps: SAlVADOR SANDY SAlVADOR INOX 46 14 ISO 996/A Discharge connection 3 4 12 Rated power Max power consumption 2.3 kw 2.7 kw 3 2 1 8 6 645 mm Shaft speed Rated current at 46 V 332 RPM 3.4 A 1 4 2 2 4 6 8 1 12 14 5 1 15 2 375 mm 47 kg Throughlet: 5 mm SeNIOR INOX 39 12 ISO 996/A Discharge connection 4 35 3 1 Rated power Max power consumption Shaft speed Rated current at 46 V 5.1 kw 5.8 kw 17 RPM 8.7 A 25 2 15 1 5 8 6 4 2 5 1 15 2 25 3 35 755 mm 86 kg Throughlet: 8 mm 1 2 3 4 5 48 mm SANDY INOX 8 25 ISO 996/A Discharge connection 3 Rated power 6.7 kw Max power consumption 7.6 kw Shaft speed 34 RPM 6 4 2 2 15 1 5 755 mm 86 kg Rated current at 46 V 11 A 2 4 6 8 1 12 14 16 Throughlet: 46 mm 5 1 15 2 25 48 mm
The Grindex team. For some 5 years, Grindex has specialized in designing and manufacturing electrical submersible pumps for professionals. Durable and dependable, they are used in the most demanding and specialized applications worldwide. We have delivered over 3, pumps in more than 1 countries. 95481 ENG 6Hz. 29.6. We offer pumps for almost any application. Our range includes drainage pumps, sludge pumps, slurry pumps and stainless steel pumps. When you are running a Grindex pump, you can rest assured that a dedicated team is watching your back. Our experts are always there to see to your every need. Through our global network of sales and service centers, we provide the best level of support possible day and night, seven days a week. It s all part of the service. For more information, please visit med www.grindex.com Grindex AB P.O. Box 725 SE-174 7 Sundbyberg Sweden Tel +468 66 66 Fax +468 745 53 28 marketing@grindex.com