www.classroom.umn.edu Apple Device Projection Instructions for use in General Purpose Classrooms This guide is meant to assist classroom users who are using Apple devices to display content using the classroom projection system. The following topics are covered below: Basic connection to the classroom projection system, including a guide to adapters Common troubleshooting tips How to project Mac laptops running Windows For information on using Apple TV in selected classrooms, see: http://www.classroom.umn.edu/support/appletv.html If this guide does not address your question, please contact the Classroom Support Hotline for more assistance: 612-625-1086 or email classrm@umn.edu. Connecting to the Classroom Projection System 1. Cables are located in the pocket of the instructor's podium. Connect the VGA, or HDMI (where available), cable to the device. To connect to the classroom projection system, you may need an adapter. The type of adapter required varies by device model and age (see next page on adapters). OCM supplies a Mini DisplayPort-to-HDMI adapter in rooms where HDMI is available; otherwise a Mini DisplayPort-to-VGA adapter is supplied. If your device does not have a Mini DisplayPort/Thunderbolt, port you must provide your own adapter. 2. Connect the audio cord, if using the VGA connection, to the headphone jack of your device (not the microphone jack) to have audio projected through the system speakers. Please note that the audio cord is not for use with HDMI. 3. Press the "Laptop" source button on the control panel. When the button stops blinking, start the device. 4. When using the HDMI connection with a Mac, you may need to adjust your sound settings for the Mac s audio to come through the classroom speaker system. Go to your Mac s System Preferences, select Sound, select the Output tab, and select the HDMI source. Touchscreen control panel, showing a room with both HDMI and VGA laptop connection options Adapter connecting laptop to VGA cable
Guide to Mac Adapters Some Apple Macintosh devices and all ipads/iphones require an adapter to connect to the standard VGA and HDMI cables in general purpose classrooms. Any model with an HDMI output can connect directly to the HDMI input where available. All recent (manufactured after October, 2008) and currently shipping Mac laptops have a Mini DisplayPort (aka Thunderbolt ) connection that is compatible with the HDMI or VGA to Mini DisplayPort adapters supplied in classrooms. The Macbook Pro with Retina Display models (13 and 15 inches) also have HDMI ports. If you are using one of these models in a room equipped with HDMI, you will not need to use an adapter. IMPORTANT: The following Apple laptop models do not support audio when connected to an HDMI adapter: MacBook (Late 2009), MacBook (13-inch Aluminum Late 2008), MacBook Pro (late 2008), (Mid 2009), and (Early 2009). To project audio with these laptop models, use the audio cable and VGA connection at the instructor station (you will need to supply the VGA adapter for your model). Apple models older than 2008 may or may not display using VGA in classrooms that have been upgraded to HDMI. In these select cases, the video image may or may not display via HDMI using your DVI-to-HDMI adapter. The adapter will not support audio. If audio is required, you must supply a more current model. When troubleshooting, be aware that adapters do sometimes malfunction or wear out. Consider adapter replacement as part of your troubleshooting options. Note: OCM only supplies Mini DisplayPort adapters (HDMI only in HDMI-available rooms; otherwise VGA) Most Mac laptop models require either a Mini DisplayPort-to-VGA adapter (left) or a Mini DisplayPort-to-HDMI adapter (right). OCM supplies these adapters in classrooms (HDMI only where HDMI is installed in the classroom; otherwise VGA.) ios Devices (ipads and iphones) (These Adapters are not supplied in classrooms) The Apple 30-Pin VGA Adapter (left) supports video mirroring on ipad 2, ipad (Third Generation), iphone 4S, and video out (only) on ipad (1st generation), iphone 4, or ipod touch (4th generation). Apple Lightning-to-VGA or Lightning-to- HDMI adapters (right) supports mirroring on ipad with Retina display (Fourth Generation), ipad mini, ipad Mini with Retina Display (1 and 2), ipad Air (1 and 2), iphone 5/5C/5S, iphone 6/6 Plus, or ipod touch (5th generation). Please note that adapters for use with Mac laptops (Mini DisplayPort) will not work with ipads/iphones.
Common Troubleshooting Tips After connecting a laptop, if the image does not display on the projection screen, try these troubleshooting tips. 1. Open "System Preferences" on your laptop. (Look in the dock for an icon that looks like a grey box with a gear icon, or in the Apple menu. 2. Click on "Displays", hold down the option key, then click the "Detect Displays" button. The image should appear on the projection screen. 3. If the issue is related to Internet connectivity, make sure to either turn on Wi-Fi (using the setting at top of desktop near the clock), or connect to the classroom s wired network jack. To have the same image on both screens, locate and check Mirror Displays (located in the Arrangement tab). [Note: Some software programs, such as PowerPoint, may extend the desktop in presenter mode. You can adjust the display to mirror in the slideshow tab.] If the image is distorted, or you see an error message that indicates "Frequency out of range, you may need to adjust the monitor resolution: Open "System Preferences" on your laptop. Click on "Displays," and in the "VGA Display" window select "1024 x 768, 60.0 Hz" from the list. If the image is not filling out the room screen, adjust the aspect ratio by pressing the Projector Aspect Ratio button (in selected rooms) to display widescreen images. For troubleshooting on adapters, see the Guide to Mac Adapters section above. If these tips do not resolve the issue, you may need to fully power down your laptop or device and try again.
How to Project Mac laptops running Windows 7 All display settings changes must be made using software. When running Windows, the Function keys normally used to adjust laptop projection settings do not work. If you have the Windows Mobility Center: 1. Find the Windows Mobility Center under the Start/Programs/Accessories menu 2. Click on Connect display if Display connected or the icon with two screens is not present 3. Click on External Display for the following options: Clone or mirrored mode (displays the same image on both screens) Extended desktop (displays standard desktop/icons on one screen with blank desktop on second screen) Monitor resolution (allows changes to screen resolution: set to 1024x768, 60hz) If the Windows Mobility Center is not available, or the procedure above did not work: 1. Go to Start Menu 2. Select Appearance and Themes or Control Panel 3. Select Display Settings 4. Click on Settings tab 5. Click on Advanced Settings 6. Click on the GeForce 8600M GT tab (Note: this will vary depending on the laptop model, but look for something similar)
How to Project Mac laptops running Windows, continued. 7. Click on Start the NVIDIA Control Panel 8. If you need to change the configuration of the displays or change the settings to use a second display, click the Set up multiple displays link on the left side. 9. Select the display mode (clone/dual view) 10. Select Laptop Display + Analog Display. 11. Laptop Display should be set as primary. Click Apply to make the changes. 12. If the image is distorted or Frequency Out of Range is indicated, adjust the resolution: Click the Change resolution link on the left side. Use the slider control to adjust the resolution to 1024x768; The refresh rate should be set to 60 Hertz Click Apply to save the changes.