LWC-L UBBL01 A rugged, high-energy density battery, for use in portable electronics, military systems and wearable diagnostic devices. UBBL04 UBBL04 A lightweight battery with convenient form factor, rugged case construction for portable electronics applications. UBI-2590 UBBL02 (NSN: 6140-01-553-3527) Battery with military tough case construction, for use in portable electronics, robotics, military communication devices, AUVs and UUVs. UBBL06 (LI-145) UBBL06 (NSN: 6140-01-542-4380) Implements SmartCircuit Technology to be used in soldier based applications, electronic field and communications equipment and other military applications. UBBL03 (Type LI-7) UBBL03 Implements SmartCircuit Technology and lightweight design for rugged, portable electronics, military training systems and back-up server power. UBBL08 (LI-80) UBBL08 (NSN: 6140-01-580-6190) Implements SmartCircuit Technology for soldierbased applications, electronic field and communications equipment and other military applications. Smaller version of the UBBL06.
UBBL09 UBBL09 Implements SmartCircuit Technology for use in portable electronics, robotics, military communication devices, AUVs and UUVs. UBI-2590 SMBus UBBL10 Implements SmartCircuit Technology with flexible output voltage for portable electronics, robotics, military communication devices, AUVs and UUVs. Enhanced version of the UBI-2590. UBI-2590 / HC SMBus UBBL13 Implements SmartCircuit Technology with flexible output voltage for portable electronics, robotics, military communication devices, AUVs and UUVs. High capacity version of the UBI-2590 SMBus.
BA-5368/U UB2776 (NSN: 6135-01-455-7947) Lightweight battery with high energy density for use in consumer and commercial telematics, search & rescue devices, military communications, detectors & imaging and medical devices. Average voltage is 12.0V. BA-5390A/U UB0021 (NSN: 6135-01-517-6060) State of Charge Indication to fully utilize capacity, dual modes (15V or 30V), 50-100% more runtime than BA-5590/U. For use with AN/PRC-119 SINCGARS, Javelin Medium Anti-Tank CLU and more than 50 other military applications. BA-5372/U UB1773 (NSN: 6135-01-214-6441) Lightweight battery with high energy density for use in consumer and commercial telematics, search & rescue devices, military communications, detectors & imaging and medical devices. Average voltage is 6.0V. BA-5347/U UB0016 (NSN: 6135-01-455-7946) 50-100% more runtime than BA-5847/U. Can be used in many military applications such as the AN/PRM-34 radio set and AN/PAS-13 thermal weapons site. ½ AA UB1426 (NSN: 6135-01-340-7883) Lightweight battery with high energy density for use in consumer and commercial telematics, search & rescue devices, military communications, detectors & imaging and medical devices. Average voltage is 3.0V. Type-5380 UB2777 & UB0009 50-100% more runtime than BA-5800/U. Can be used in many military applications such as the AN/ASN- 169 satellite navigation set and the AN/PSN-10 GPS, 2-channel, SLGR.
BA-5367/U UB0006 (NSN: 6135-01-507-1135) Alternative for the BA-5567/U. Can be used in applications such as consumer and commercial telematics, military communications and medical devices. Average voltage is 3.0V, nominal capacity is 1.3Ah. Sophie U2560E-5-27 (NSN: 6135-01-539-0013) Long operating life with 10-year shelf life. For use in Sophie Thermal Imager and Mirabel Thermal Camera. BA-5390/U UB0001 (NSN: 6135-01-501-0833) Dual modes (15V or 30V), 50-100% more runtime than BA-5590/U. For use with AN/PRC-119 SINC- GARS, Javelin Medium Anti-Tank CLU and more than 50 other military applications. MIDS U10025 (NSN: 6135-01-545-6582) Lightweight, 10-year shelf life, re-settable fuse and safety shutdown separator. Can be used in military applications, MIDS-LVT.
UBBL07 UBBL07 Long cycle life and high energy density for use in portable electronics, military radios, handheld devices, medical equipment, unmanned vehicles and server back-up power. Nominal capacity is 7.2Ah, energy is 26Wh. UBBP01 UBBP01 Common sizes, thin and can be assembled into packs. Can be used in portable electronics, medical equipment and tracking applications. Nominal capacity is 1.8Ah, energy is 6.7Wh. UBP103450/PCM UBP001 Common sizes, thin and can be assembled into packs. Can be used in portable electronics, medical equipment and tracking applications. Nominal capacity is 1.75Ah, energy is 6.5Wh. UBBL19 UBBL19-FL or UBBL19-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 3.6V; voltage range is 3.0 to 4.2V. UBP053450/PCM UBP002 Common sizes, thin and can be assembled into packs. Can be used in portable electronics, medical equipment and tracking applications. Nominal capacity is 900mAh, energy is 3.4Wh. UBBL20 UBBL20-FL or UBBL20-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 7.2V; voltage range is 6.0 to 8.4V.
UBBL21 UBBL21-FL or UBBL21-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 10.8V; voltage range is 9.0 to 12.6V. UBBL24 UBBL24-FL or UBBL24-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 3.6V; voltage range is 3.0 to 4.2V. UBBL22 UBBL22-FL or UBBL22-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 14.4V; voltage range is 12.0 to 16.8V. UBBL25 UBBL25-FL or UBBL25-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 3.6V; voltage range is 3.0 to 4.2V. UBBL23 UBBL23-FL or UBBL23-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 3.6V; voltage range is 3.0 to 4.2V. UBBL26 UBBL26-FL or UBBL26-C1 Available with wire or connector terminals. To be used in portable electronics, hand-held devices, medical equipment and back-up power. Nominal voltage is 3.6V; voltage range is 3.0 to 4.2V.
U10004 U10004 Compatible with laminating technologies to be used in Smart security cards. Also used in applications such as asset tracking tags and medical devices. Nominal capacity is 1.5Ah, max discharge is 125mA continuous. U10007 U10007 Wafer thin and lightweight. Can be used in Smart security cards, asset tracking tags, bank theft tracking systems, electronic record tracking systems and medical devices. Nominal capacity is 400mAh, max discharge is 25mA continuous.
U9VL-FP / U9VL U9VL-FP / U9VL (NSN: 6135-01-369-9792) Lasts up to 5X longer than alkaline and 10X longer than carbon-zinc batteries. Can be used in medical devices, music/audio devices and instrumentation. Sold in foil packs. U9VL-J U9VL-J Encased in aluminum housing which enhances the battery life. Designed for long-use applications. Can be used in smoke alarms, carbonmonoxide detectors, medical devices, and music/audio devices. U9VLBP U9VLBP Five times longer battery. Designed for long-use applications. Can be used in smoke alarms, carbon-monoxide detectors and other applications. Sold in blister packs. U9VLX U9VLX 10 year smoke alarm battery. Encased in aluminum housing which enhances the battery life. Can be used in smoke alarms, carbonmonoxide detectors and other applications. Sold in blister packs.
U1965 U10009, U10010, U10011, U10012 Available with PTC and tabs. Can be used for consumer and commercial telematics, search & rescue devices, medical devices and military communications. Nominal capacity is 3.2Ah, max discharge is 1.5A continuous. 3V, D-Size U10013, U10014, U10015, U10016 Available with PTC and tabs. Can be used for consumer and commercial telematics, search & rescue devices, medical devices and military communications. Nominal capacity is 11.1Ah, max discharge is 3.3A continuous. 3V C-Size U10017, U10018, U10019, U10020 Available with PTC and tabs. Can be used for consumer and commercial telematics, search & rescue devices, medical devices and military communications. Nominal capacity is 4.8Ah, max discharge is 2.0A continuous. 3V 5/4 C-Size U10021, U10022, U10023, U10024 Available with PTC and tabs. Can be used for consumer and commercial telematics, search & rescue devices, medical devices and military communications. Nominal capacity is 6.1Ah, max discharge is 2.5A continuous. 3V D-Size Cell High Capacity U10026 Can be used for automotive, security devices, search & rescue, military communications, medical devices, automatic meter readers, M2M communications, GPS/mobile asset tracking. Nominal capacity is 13.0Ah.
CA0001 CA0001 For the LWC-L (UBBL01) battery. Cable type is 2 conductor; 22AWG. 61cm (24in) long with a LEMO FGG 0B 305 CLA battery connector. CA0002 CA0002 For the UBI-2590 (UBBL02) and UBBL09 batteries. Cable type is 4 conductor; 18AWG. 61cm (24 in) long with a black type SJOOW rubber insulation. CA0005 CA0005 For the UBBL03 (Type LI-7) battery. Cable type is 5 conductor; 20AWG. 61cm (24in) long with a JBXFN1G05MCSDSMR battery connector. CA0006 CA0006 For the UBI-2590 (UBBL02), BA-5390 (UB0001) and UBBL09 batteries. Cable type is 24V, 2 Conductor; 18AWG. 61cm (24in) long. CA0007 CA0007 For the UBI-2590 (UBBL02), BA-5390 (UB0001) and UBBL09 batteries. Cable type is 12V, 2 Conductor; 18AWG. 61cm (24in) long. CA0008 CA0008 For the UBI-2590 (UBBL02), BA-5390 (UB0001) and UBBL09 batteries. Cable type is 12/24V, 4 conductor; 18AWG. 61cm (24in) long.
CA0009 CA0009 For the UBBL06 (LI-145) and UBBL08 (LI-80) batteries. Cable has 300V maximum voltage rating, 222AWG. 610mm (2ft) long. Non-shielded cable. CA0022 CA0022 Charge/discharge cable for the UBBL06 (LI-145) and UBBL08 (LI-80) batteries. Cable has 300V maximum voltage rating, 222AWG. 610mm (2ft) long. Shielded cable.
CH0001 CH0001 Battery charger for the LWC-L (UBBL01) battery. Has LED status indicator and safely circuit protects against charging shorted packs. CH0002 CH0002 Battery charger for the UBI-2590 battery family (UBBL02, UBBL10, UBBL13.) Has LED status indicator and optional vehicle power adapter. CH0003 CH0003 (NSN: 6130-01-499-7305) 6-bay charger that auto senses battery type to assure proper charge profile. Has LED status indicator and CE Mark approval. CH0004 CH0004 (NSN: 6130-01-559-0124) 2-bay charger that auto senses battery type to assure proper charge profile. Has LED status indicator and CE Mark approval. CH0005 CH0005 Commercial desktop charger for the UBBL04 battery. Has LED status indicator and safely circuit protects against charging shorted packs. CH0006 CH0006 Smart charger for the UBBL06 (LI-145) battery, utilizing SmartCircuit Technology. Charges 3 batteries simultaneously.
CH0007 CH0007 Smart charger for the UBBL03 (LI-7) battery, utilizing SmartCircuit Technology. Charges 9 batteries at once in less than 2.5 hours. CH0008 CH0008 (NSN: 6130-01-545-1983) Soldier based charger for UBBL06 and UBBL08 bateries, utilizing SmartCircuit Technology. Designed to be stowed in pack. CH0012 CH0012 (NSN: 6130-01-545-1981) Smart charger for the UBBL06 (LI-145) battery and the UBBL08 battery with the UAD002 adapter, utilizing SmartCircuit Technology. Charges 12 batteries simultaneously. CH0014 CH0014 Commercial desktop charger for the UBBL09 battery. Has LED status indicator and safely circuit protects against charging shorted packs. CH0015 CH0015 (NSN: 6130-01-542-5108) Commercial desktop evaluation charger for UBBL06 (LI-145) battery. Contains charger, power supply and cables. CH0017 CH0017 (NSN: 6130-01-547-3918) Charger and power supply kit for the UBBL06 (LI-145) and UBBL08 (LI-80 batteries, utilizing SmartCircuit Technology. Chargers 12 batteries simultaneously.
UAD002 UAD002 Charger adapter for the UBBL08 (LI-80) for use in the CH0012 or CH0006 chargers. Easy installation and retrieval, lightweight and rugged.
UKT0011 UKT0011 Consists of a battery box and charger box, utilizing SmartCircuit Technology. When loaded with 6 to 12 UBBL10 or UBBL13 batteries, will provide output power in the event of a primary power failure.
09 NOV 10 UBM-5156 Rev A