1 13/16 46mm DIRECT 1 13/16 46mm L3CO-SUR-SYS DR OP X Article # Mounting Distribution Diffuser Length Angle Voltage Linear Spot x Qty Electrical Finishes Type Couplers / Product Mounting Type Distribution Diffuser Length Angle Couplers Voltage Inserts L3CO-SUR-SYS Ceiling DR - Direct OP - Opal State desired length (If required) 120V Linear Contur Surface CD - Downward FC - Surface 90 277V CS - Sideward Specify custom angle L307-3000K Wall (Horizontal) 347V L407-4000K HD - Downward (Optional) L357-3500K (upon request) HU - Upward HF - Forward Wall (Vertical) VS - Sideward VF - Forward Inserts Electrical Options Spot (x please specify quantity) Please specify profile/ end cap (standard finish: Aluminum, add 'B' for White finish) DN - Non-dimming 00 Natural Anodized Aluminum 13 Mysterious Gray 1N30 (3000K) or 1N40 (4000K) 1W or 2W 16 DV - 0-10V Dimming 01 Sparkling Silver 14 Twilight 2N30 (3000K) or 2N40 (4000K) 1W or 2W 40 DL - Lutron Hi-Lume A Series 02 Black Velvet 15 Lost Dream 3N30 (3000K) or 3N40 (4000K) 1W or 2W diffused EM - Emergency 03 Crystal White (Supplied by others) 16 Purple Sky 1L30 (3000K) or 1L40 (4000K) 1W or 2W 16 adjustable Other: Please specify 04 Creamy 17 Fresh Oh 2L30 (3000K) or 2L40 (4000K) 1W or 2W 40 adjustable 05 Hampton Bay 18 Funky P. 3L30 (3000K) or 3L40 (4000K) 1W or 2Wdiffused adjustable 06 Lagoon 19 Kissing Aphrodite For unique customized profiles please include a layout drawing or description below; * Include detailed information such as distance between linear lamps, spots and aluminum caps. * Zaneen will supply submittal drawing for approval once a Purchase Order is received. Finishes (see page 5) 07 Urban Forest 20 Poseidon's Paradise 08 In the Army 21 Blue Sky 09 Rusty Angel 22 Spring Green 10 Rusty Rush 23 Mellow Yellow 11 Milk & Chocolate 24 Golden Heart 12 Fade to Gray 95 Gun Profile Layout Suggestions Available for International specifications by adding 'INT' at the end of the existing Model #. International spec sheets are available upon request. For assistance to write your custom specification, email your inquiry to: specification@zaneen.com. You will receive a response within 1-2 business days. Page 1 of 6
Type Surface (Non-IC Type) Ceiling or Wall mounted Rated for Dry or Damp locations (Ip20) Approval Certified by C.S.A. for North American Standards Emission Direct. Efficiency Acrylic diffuser (snap-in) lens32% PROFILE Measurements w. 46mm x ht. 46mm (1 13/16" x ht. 1 13/16") Housing Anodized extruded aluminum profile up to 9-10 2/16 long. Profiles are joined with a coupler to ensure uniform appearance and easy installation. Extruded aluminum offers high reflective surface and excellent heat dissipation. Corners 100% homogeneous appearance. 90 degree and custom angles (45-180 degree) are available. Corners are created with mitered cut in lens and aluminum. End Caps are held in place with spring clips. There are no visible screws. Finishes Standard; Natural anodized aluminum Optional; 24 colors offered using premium powder coated finish. Profile and end caps can be specified in different finishes. Wall Bracket If required, aluminum wall brackets are located approximately every 4ft-5ft. Fasteners and wall anchors are supplied by others. Mounting Holes Keyholes are drilled at the factory. Mounting hardware are supplied and installed by others. When using wall fastening spacer or key hole milling, fixture must be specified as up light or down light. INSERTS AR (6.9W/ 525 lm/ft) (6.9W/ 525 lm/ft) (LM 79-80) inserts are offered in 150mm (5 7/8") increments. Zaneen will finalize the actual profile length after calculating the inserts required. * Please contact Zaneen for other color temperature options. SPOT 1-2W / 350-500mA (constant current) (1W/ 85lm, 2W/102lm) (1W/ 106lm, 2W/127lm) 16, 40, diffused optics Non- adjustable or 25 adjustable Spot inserts are not compatible with Lutron dimming drivers. Minimum spacing between the spots is 5 with a remote power supply. Lamp Combination For specific lamp combinations or configurations, please specify the overall length and attach a sketch or drawing of the intended configuration. Zaneen will supply submittal drawings for approval once an order is received. ELECTRICAL Luminaires are pre-wired with a factory installed branch circuit wiring and quick-release connectors. Through wiring is used to connect the luminaires. BX Cable is connected directly into the fixture. Junction cover plate is available upon request. Power Feed 22mm diameter hole located on the back of the profile. Driver Remote driver must be installed into a metal enclosure (supplied by others). Maximum distance between the power supply and the last fixture on the circuit is 30' using a 18-gauge wire. For more than 30', the gauge of the wire must be determined by a certified professional. The length of the fixture specified must be considered within the maximum distance of 30'. Provisions must be made on site for accessibility to the power supplies. *Electronic Class II driver, 120V/ 277V/ 347V(optional). Dimming driver 0-10V (10-100%) Lutron Hi-Lume A type dimming. Emergency Inverter Compatible To be installed remotely but provided by others, can be located up to 250 away from the fixture. WARRANTY Zaneen provides a limited warranty from date of purchase to original purchaser. Inserts : 5 year Rated for 50,000 hours at 70% lumen output (L70) Driver : 5 year Fluorescent / Ballast : 5 year Dimming Ballast : 3 year 12V Transformer : 1 year Non-Electrical Components : 1 year Page 2 of 6
INSERTS AR Color Temp. (K) Watt Lumens Length L30 L40 3000 K 6.9W / ft 525 lm/ft 4000 K 6.9W / ft 525 lm/ft 3000mm (9'-10 1/8 ) can be cut every 150mm (5 7/8 ) SPOT INSERTS OPTICS 28 OPTICS 36 DIFFUSED 1N 2N 2N CT Lamp/ Voltage Lumens Nominal/ Actual 85/ 68lm 102/ 86lm 106/ 85lm 127/ 108lm 85/ 71lm 102/ 91lm 106/ 89lm 127/ 113lm 85/ 65lm 102/ 83lm 106/ 81lm 127/ 103lm Dimensions Non- adjustable 30mm Non- adjustable 30mm Non- adjustable 30mm OPTICS 28 OPTICS 36 DIFFUSED 1L 2L 2L CT Lamp/ Voltage Lumens Nominal/ Actual 85/ 68lm 102/ 86lm 106/ 85lm 127/ 108lm 85/ 71lm 102/ 91lm 106/ 89lm 127/ 113lm 85/ 65lm 102/ 83lm 106/ 81lm 127/ 103lm Dimensions 25 adjustable 40mm 25 adjustable 40mm 25 adjustable 40mm *Standard Finish: Aluminum / Add B for White finish. *Standard Finish: Aluminum / Add B for White finish. ELECTRICAL OPTIONS DRIVERS Non-Dimm/Dimmable Max. Wattage Voltage Dimensions (mm/inch) DN DV Non-dimm 0-10V dimming 100W 100W 120-277V / 24Vdc 347V (*Optional) L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 DL Lutron Hi-Lume A Series 40W 120-277V / 24Vdc L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 Page 3 of 6
COMPONENTS (refer to page 4 for finish options) (refer to page 4 for finish options) Aluminum Profile *max. 3000mm lengths Corner Coupler Required Angle (45-180 ) Diffuser *max. 3000mm lengths Spacer (wall fastening) End Cap Keyhole Milling (wall fastening) Coupler Power Feed 90 Corner Coupler Page 4 of 6
00 01 02 03 04 05 06 natural anodized aluminum sparkling silver RAL9006FS black velvet RAL9005FS crystal white RAL 9016FS creamy hampton bay lagoon 07 08 09 10 11 12 13 urban forest in the army rusty angel rusty rush milk & chocolate fade to gray mysterious gray 14 15 16 17 18 19 20 twilight lost dream purple sky fresh Oh funky P. kissing aphrodite poseidon s paradise 21 22 23 24 blue sky spring green mellow yellow golden heart 95 gun 00 Standard Finish: natural anodized aluminum 01-24 Color Finishes: additional charge ADDITIONAL NOTES Page 5 of 6
WIRING DIAGRAMS FOR AR 0-10V DIMMING RED/WHITE VOLTAGE 0-10V DRIVER 0-10Vdc 24Vdc + _ GRAY PURPLE BLUE *DIMMER RED *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. + _ LIGHT ENGINE LUTRON ECO SYSTEM DIGITAL DIMMING VOLTAGE GROUND BLACK WHITE GREEN HI-LUME A SERIES + RED _ BLACK LIGHT ENGINE GROUND E1 - PURPLE 1 LUTRON ECOSYSTEM BUS E2 - PURPLE 2 LUTRON 3-WIRE DIMMER CONTROL VOLTAGE BLACK GREEN 3-WIRE CONNECTION DIMMER WHITE RED YELLOW OR ORANGE BLACK ORANGE WHITE DIMMING DRIVER + _ LIGHT ENGINE Page 6 of 6