MTL Surge Technologies Product Overview
Surge Protection Devices Today s modern electronic systems, such as those designed for process control and high-speed communication, rely heavily on very sensitive, high performance electronic components. These components are very vulnerable to damage and disruption caused by induced current surges and transient voltages. Sources of these surges and transients include natural phenomena (lightning, static discharges) and random man made events (power switching, spikes, welding current faults). Surge protection devices are designed to divert the resulting surges safely to earth and limit voltages to acceptable levels - protecting the electronic components and the system itself. Although protecting buildings against the effects of lightning strikes is quite common, protecting electrical and electronic devices may often be overlooked. The resulting surges and transients conducted by signal, communication and mains power cables have a significant impact, causing production downtime, corruption or loss of data and high repair or replacement costs of damaged equipment. MTL Surge Technologies MTL Surge Technologies, the surge protection division of the MTL Instruments Group Plc, designs and manufactures a vast range of protection solutions for all your system surge protection requirements. Telematic and Atlantic Scientific brand products are available for a wide range of applications including mains power equipment, telephone systems, computers, local area networks, telemetry devices, field transmitters, vibration sensors, temperature monitors, weighing stations, analogue control circuits, wind gauges, alarms, solenoid valves and many specialised types of process instrumentation. Advanced surge protection devices from MTL Surge Technologies safeguard all types of electric and electronic equipment from destructive high voltage transients and feature rapid operation, accurate voltage control and automatic resetting once the over-voltage has ceased. This brochure is intended as an introductory overview of the numerous Telematic and Atlantic Scientific surge protection devices that are currently available. More detailed information, including full specifications, can be found at www.mtlsurge.com. Alternatively, a comprehensive Product Summary brochure or individual product data sheets can be supplied by your local MTL office or distributor.
Surges & Transients Surges and transients are bursts of current and voltage that are well in excess of normal levels and are likely to disrupt or permanently damage sensitive electronic components and systems. Since the sources are lightning, static discharges, power switching, spikes or welding current faults, they can be any shape and size. Standard waveforms have been developed over many years that designers and testing authorities use to evaluate the performance of protection units and simplify their specification. As an example, lightning induced surge waveforms are simulated using equipment with a short-circuit current output of typically 5 or 10kA giving 8/20 microsecond (µs) pulses (i.e. rising to peak value in 8µS and decaying to half that value in 20µS, as shown in figure 1). Power switching transients are often simulated by open-circuit impulses of 10kV with 1.2/50µS waveforms (see figure 2). Other waveforms are also used for particular applications or by individual specifying authorities. Protection Components No single surge protection component can combine all the necessary features to prevent excess energy from reaching sensitive parts of electronic equipment. For this reason, multi-component networks or hybrid circuits, incorporating the best features of several surge protection components (as shown in figure 3), are used in MTL Surge Technologies products. Vpeak 90% 50% 10% 8µs Time 20µs Figure 1 Simulated lightning - induced surge waveform Vpeak 90% 50% 10% 1.2µs Time 50µs Figure 2 Simulated power switching transient waveform Surge waveform Voltage Varistor Surge diode The ideal protection network is one which is fast acting, GDT capable of carrying large currents for short periods and Time capable of limiting the voltage across and the current Figure 3 Components for voltage clamping through protected equipment to levels below which damage can occur. A maintenance-free and self-resetting network is normally preferred to avoid interruption of service. In addition, instrumentation and other DC and low level AC applications need very precise voltage regulation without significant leakage current that can affect measurement accuracy. For these reasons, MTL Surge Technologies data and signal line protection units incorporate gas-filled discharge tubes for high surge current diversion combined with zener diodes for fast operation (reacting within microseconds) and precise voltage clamping with minimum leakage. AC and DC mains power protectors that use voltage dependent resistors or varistors as their high power absorption capability have a distinct advantage. Since the load circuits need to be protected from the effects of varistor failure caused by overloads or successive impulses, the protection circuits are normally duplicated and monitored in power line protectors. Further Reading The background, design considerations, earthing requirements and application of MTL Surge Protection devices are considered in detail in a series of Technical Application Notes (TANs), copies of which are available upon request or from our web site at www.mtlsurge.com.
Products MTL Surge Technologies benefits from a broad based product profile, pretty much wherever electronic equipment requires protection, we can supply a solution. Whether protection is required for mains power, telecom/telemetry, networks, industrial process, aerial or wireless applications, we can help. Particular areas of expertise include: Process Control Telemetry Systems Control and Instrumentation Network Applications Transportation Wireless Infrastructure Services In addition to our comprehensive range of surge protection devices, MTL Surge Technologies provides expert consulting services to aid customers in the design and deployment of surge protection systems. As members of the MTL Group, we are able to offer local technical and sales support throughout the world. Our services include: Technical Advice Our highly trained application engineers will be glad to provide unbeatable technical advice and to discuss your particular system requirements. Seminars Training seminars are run covering various aspects relating to the protection of electronic based systems. The seminar includes topics such as lightning theory, earthing requirements, types of surge protection devices and the application of these devices. Site Surveys Our engineers can survey your entire building or plant and make informed technical recommendations. Once your design is complete, we can then supply the necessary surge protection devices for the job. OEM Capability Although we currently offer a comprehensive product portfolio, there may be instances where a custom designed product may be more suitable for your application. MTL Surge Technologies has vast experience in this area and will be happy to discuss your particular requirements. Application Notes Our easily digestible Technical Application Notes provide a wealth of useful background information, with helpful advice on using surge protection devices to their best effect. They are available free on request.
Data & Signal Protection Induced surges and transient voltages can destroy or, perhaps more worryingly, render inaccurate sensitive control and measurement instruments. Control systems, sensors and telecommunications equipment may be subjected to a barrage of interference and surges of energy, therefore to disregard the need for simple, effective and reliable surge protection is to compromise the safety of the plant. MTL surge protection devices provide protection both at the controller and at the field-mounted instrument, with specifically designed devices suitable for all data & signal requirements including Industrial Ethernet. SD Series TP48 Series ZoneBarrier Series Voltage ratings for all process I/O applications Ultra-slim, space saving design Automatic earthing via DIN rail mounting BASEEFA & CSA approved versions Process transmitter surge protection devices Direct mounting, simply screws into conduit entry Intrinsically safe & flameproof approved versions Fieldbus compatible High surge current capacity Wall, DIN or 19 rack mountable Industrial Ethernet compatible, UL certified Cat.5 UL 497A and UL 497B Listed SD Series surge protection devices combine unparalleled packing densities, application versatility, proven reliable hybrid circuitry and simple operation - features which make the series the ultimate surge protection solution for process equipment. High bandwidth, low resistance, RTD, PSTN and 3-wire transmitter versions are available covering all process related signals including 4-20mA loops, RTDs, THCs, telemetry outstations, shut down systems and fire and gas detectors. BASEEFA approved versions are also available for hazardous are application. TP48 surge protection devices safeguard field-mounted process transmitters where it matters, right at the unit. After simple installation (the TP48 screws into an unused conduit entry) it provides high-level protection against surges and resets itself automatically after each operation. The TP48 is available with screw threads to suit different transmitters, with explosion proof and intrinsically safe options for hazardous areas. Working voltage is 48V DC maximum with impulse ratings of 10kA peak current and 10kV peak voltage. Telecom Protection ZoneBarrier modular data and signal protection devices provide a uniquely customer configurable port-by-port protection approach. ZoneBarrier modules can be utilised as either stand-alone devices or as building blocks to create an unlimited multi-port protection system. Modules are available for data and signal applications including units suitable for 4-20mA loops. ZoneBarrier data and signal devices have terminal strip connectors and can be wall mounted, DIN rail mounted or mounted on any flat surface in a 19 rack. Highly-integrated, small-signal telecommunications equipment is becoming increasingly sensitive to damage and disruption from voltage surges and spikes. It makes sound sense to protect expensive telephone installations from damage and commercially damaging downtime by fitting effective and unobtrusive protection wherever surges could enter the system. MTL Surge Technologies can supply that protection, whether for private wire or public switched telephone network (PSTN) requirements and with a range of mounting and enclosure types to suit all applications. DP200 Series TS Series ZoneBarrier Series Protects telemetry and telecom equipment BT or RJ11 style plug and socket Full 4-wire protection RFI version available for noisy environments The DP200 BT & RJ Series provides robust, 10kA, plug in protection for fax, modem, telemetry and other telecom applications. Units are available with either a BT or RJ11 style plug and socket, DP200/BT and DP200/RJ respectively. Where RFI filtering is required in addition to surge protection the DP200/BT/RFI and DP200/RJ/RFI can be supplied. These devices suppress interference due to medium wave radio transmissions, and other sources, which can compromise normal telecom operation. DP200 BT & RJ Series devices are BABT certified. Plug in termination to Krone LSA disconnect block Full 10 pair protection ISDN/private wire & PSTN models Multi-stage hybrid protection technology TS Series protection devices provide full 10 pair surge protection in a single compact unit. Public switched telephone networks (PSTN) are served by the TS10-P, while the TS10-I is ideal for ISDN (base and primary rate) and private wire application. Both the TS10-P and TS10-I have a maximum surge handling capability of 20kA. TS units plug easily into standard disconnection or switching module strip. Earthing is via a hardwired connection to the MDF terminal, eliminating the need to use unreliable slide on tab connections to the frame. High surge current capacity Wall, DIN or 19 rack mountable Modular jack or terminal strip connectors Modules for a range of telecom applications ZoneBarrier telecom protection devices provide a uniquely customer configurable protection approach. ZoneBarrier modules can be utilised as either stand-alone devices or as building blocks to create an unlimited multi-port protection system. Modules are available in modular jack or terminal strip formats for applications including dial-up, lease line, ISDN, T1 and E1. ZoneBarrier devices can be wall mounted, DIN rail mounted or mounted on any flat surface in a 19 rack. ZoneBarrier telecom units are UL 497 and UL 497A Listed.
Mains Power Protection Surges and spikes from nearby lightning strikes, arc-welders and high voltage cables can destroy or disrupt unprotected electronic equipment. These destructive forces enter mains power circuits within buildings by a variety of methods. The primary route is where power, often dirty and spike-laden, actually enters the building and it is at this point that surges should be stopped in order to prevent them from propagating further. However, surges and RFI can also corrupt mains power supplies from within the building. By providing protection at the main power distribution board and then at each piece of equipment, mains borne surges and spikes are eliminated before they can cause damage. Mains power protection is fundamental - MTL Surge Technologies supplies that protection. ZoneMaster Series ZoneSentinel Series ZoneDefender Series Remote monitoring and module diagnostics Optional high performance mains power filter Optional SAD modules and surge counter Patented technology, UL 1449 2nd Edition Listed ZoneMaster is engineered to protect the most critical electronic systems, suppressing surges at the main service panel. This patented range is available in 150, 250 or 300kA versions. ZoneMaster PLUS, however, can be specified and configured to meet the exact requirements of any facility. Models are available with 150, 250, 300, 450 and 600kA ratings and can easily be upgraded on site should additional surge handling capability be required. Both ZoneMaster and ZoneMaster PLUS units have thermal and short circuit fusing. 90kA protection for distribution boards Remote monitoring, audio and visual indication Optional high performance mains power filter Patented technology, UL 1449 2nd Edition Listed The ZoneSentinel range is engineered for application at distribution boards and small service locations and provides cost effective, high capacity surge protection to 90kA per phase. When used at a local panel in combination with a ZoneMaster at the service entrance, ZoneSentinel provides the ultimate in surge protection. Status indication is supplied as standard, with these modular, low impedance devices. An optional remote monitoring unit is available providing audio and visual indication of protector status and also a mains power filter. 70kA protection for lighting & distribution panels Status indication and remote monitoring Thermal and short circuit fusing for safety UL 1449 2nd Edition Listed The ZoneDefender range has been specifically engineered for interior lighting and small distribution panels. ZoneDefender has a maximum surge current capacity per phase of 70kA and is suitable for AC or DC application. Status indication is supplied, as standard, allowing each varistor network to be continually monitored and indicated by LEDs on the front panel of the device. Remote monitoring is enabled by the remote indication contacts of these wall or flush mounting devices. ZoneDefender units exceed ANSI/IEEE C62.45 and ANSI/IEEE C62.41. MA3000 Series MA100 Series MA05, MA10, MA15 Range of voltage and current ratings available Easy installation - DIN rail mounting Optional remote monitoring available Dual networking and thermal disconnect features The MA3000 Series DIN rail mounting devices are suitable for use on all sizes of distribution board and offer either 40 or 65kA levels of protection (MA3040 and MA3065 units respectively). These pluggable devices come in two parts consisting of a base element and plugin protection module. Optional features available for this range are dual networking, ensuring continuity of protection, and status monitoring for up to 15 units via a separate monitoring block. Alternatively, each module can be individually monitored remotely via volt-free contacts. Single and three phase versions available Suitable for wall or surface mounting Dual redundant, individually monitored MOV networks Added thermal fuse protection The MA100 Series devices prevent surges and transient overvoltages from damaging electronic systems such as instrumentation control panels, telemetry outstations and fire and security alarm installations. These 20kA protection devices are available in single phase (MA101) and three phase (MA103) versions and are supplied in a range of voltage options. An optional IP65 rated weatherproof enclosure is available for this range should it be necessary. MA100 range devices meet the requirements of BS 6651:1999, Surge Category C. High quality filtering with ring suppression DIN rail, wall/floor mounting and filter case types Added thermal fuse protection EMC compliance, exceeding IEC 61000-4-5, level 4 MA05, MA10 & MA15 devices can be incorporated into, or mounted close to, individual items of electrical equipment, providing local protection against surges and electrical noise. Available with a 5, 10 or 15 amp operating current, 110 or 240V working voltage and 3 package types, this is a truly versatile range. These unique units combine RFI filtering and ring suppression, aiding compliance with EMC directives. DIN rail mounting, 18kA rated, MA15 units are UL Recognised Components and have optional status indication. MA05 and MA10 units are 6.5kA rated. 10 Year No Fuss warranty At MTL Surge Technologies we understand that your business relies on our products so we aim to design and manufacture the very best devices available. We know that when you install an MTL Surge Technologies surge solution you want to know that it will give years of reliable maintenance free protection, protection you can depend on, and we re confident that it will. We offer a 10 Year No Fuss warranty on all our surge solutions regardless of application* so in the unlikely event of failure you can simply exchange the faulty device for a new one. *excludes SAD modules in AC mains power units which have a 10 year or 2 free replacement module warranty (whichever comes first)
Specialist Protection MTL Surge Technologies has a wealth of experience in the design and manufacture of surge protection solutions for very specialised areas of application. Whether protection is required for weighing systems and loadcells, CCTV installations or antennae protection, MTL can supply a superior Telematic or Atlantic Scientific protection device to meet your requirements. It is not just the obvious areas, such as mains power, networks and telecom systems that require protection these specialist applications should not be overlooked. CA Series LC30 VP08 Protects radio transmitters and receivers Large bandwidth DC to >2GHz, DC coupled Robust - 10kA surge rating Tested in accordance with BS 6651:1999 CA Series devices prevent surges and transient overvoltages conducted through coaxial cables from damaging connected electronic systems. They protect vulnerable equipment without affecting normal operation, passing high frequency signals with little attenuation while diverting surge currents safely to earth and clamping output voltages to safe levels. Typical applications include radio telemetry systems, mobile communications base stations and aerial systems. A wide range of connector styles plus mounting kits and enclosures are available. Protects load cells & weighbridges Certified for use in legal metrology applications Easy installation, rugged weatherproof enclosure Suitable for Intrinsically Safe circuits The 10kA rated LC30 is specifically designed to protect load cell and weighing system installations from surge damage. Severe overvoltages or impulse currents on signal cabling can lead to malfunctions or damage to individual strain-gauge bridges and associated electronic instrumentation. Protection is even more critical with digital load cells, where electronic components and amplifiers are installed right at the point of greatest exposure. The LC30 is classed as simple apparatus and is suitable for legal metrology applications. Protects video and CCTV systems Wide bandwidth - 65MHz Crosstalk typically better than 70dB Tested in accordance with BS 6651:1999 The VP08 has been specifically designed to meet the needs of video systems users. Developed in collaboration with broadcasting professionals, the VP08 provides high, 10kA levels of lightning and surge protection whilst maintaining high quality video signals. The combination of its wide bandwidth, very low insertion loss and extremely low crosstalk ensures excellent signal quality, even where many VP08s share the same earth connection. The VP08, with BNC connectors, is available with a range of mounting kits and enclosures to simplify installation. Network Protection Network technologies from LANs to the Internet have revolutionised the way that businesses operate. From last months sales figures to the real-time status of a remote pumping station, industry relies on computer networks now more than ever. Network surge protection is essential if your business relies on IT services for its minute to minute operation. MTL Surge Technologies provides an excellent range of protection devices serving a wide range of network and communications applications. Make sure you re protected. Combination Protection Although MTL Surge Technologies supplies many unique and diverse stand alone protection devices, there may be times when complete mains power, telecom and/or network protection is required in a single, compact device. MTL offers several professional Telematic & Atlantic Scientific protection ranges for home, office or industrial use which meet this criteria. These versatile devices are fully configurable and come with the added peace of mind of a connected equipment warranty. Simply choose from a wide range of protection modules and just plug and protect. ZoneBarrier Series Modular, expandable protection for one to an unlimited number of ports Wall, DIN or 19 Rack mountable High current surge capacity Modules suitable for a wide range of network and comms applications Industrial Ethernet compatible, UL certified Cat.5 NetShield Series Simply plug and protect for full 10kA protection Protection for mains power, telecom, networks, ISDN and wireless LAN 6 year, 10,000 connected equipment warranty Robust, configurable protection system The ZoneBarrier Series is a completely modular communication line protection system. Designed for multi-port or single port applications, ZoneBarrier offers a flexible and uniquely customer configurable port-by-port protection approach. ZoneBarrier can be utilised as either a wall mountable stand-alone device or as DIN rail mounting building blocks to create an unlimited multi-port network protection system. Rail assembly units will also accommodate a mix of up to 32 ZoneBarrier modules and can be mounted on any flat surface or mounted in a 19 rack. Modules are available for a wide range of network and comms applications including RS232, RS485, 100Base-T, 10Base-T and Token Ring and come with RJ45, BNC, TwinAx, terminal strip or MMJ connectors. ZoneBarrier network and comms devices are UL 497A Listed and UL certified Cat.5 and are tested to IEC 61000-4-5 and CCITT K17. The NetShield Series provides full strength surge protection where you need it most. Unlike similar high street products, NetShield s professional design allows it to be custom configured for all your surge protection needs. NetShield protects your business against surge voltages transmitted via mains power, networks and telecom systems, not to mention the down-link from your wireless antenna or the up-link to your ISP. The NetShield range is designed to meet common protection requirements for the office, factory and even the home and can be configured to protect stand-alone or networked workstations and server installations. It also has the capacity to easily accommodate and protect uninterruptible power supplies, fax machines, modems, telephone systems, ISDN and wireless LAN. No specialist installation work is needed - just plug in and protect. The world of NetShield is as versatile as you want it.
www.mtlsurge.com For more information about the products listed in this document and our full range please visit our web site at www.mtlsurge.com. Here you will find more information on MTL Surge Technologies and the Telematic and Atlantic Scientific brands as well as a wealth of information on surge protection and our surge solutions including the following: Product data sheets Technical application notes Distributor information Technical support Application stories The MTL Instruments Group plc The MTL Instruments Group is recognised as a world leader in the development and supply of Intrinsic Safety, Process Control and Surge Protection products aimed at the process control and telecommunications industries. Many of the world s safety-critical processes are monitored, controlled and protected by MTL products and the Group is distinguished by its global network of sales and support centres and by its acknowledged position as a thought-leader in this high technology marketplace. MTL has recently developed solutions which enable process control systems to be devolved from the control room onto the process plant itself giving benefits of improved control integrity and cost savings. This has involved the combination of the Group s three core technologies - Open Control Platforms, Hazardous Area Solutions and Surge Protection. MTL8000 Process I/O The MTL Group portfolio of open-systems components includes: Control and Visualisation Software Controller Hardware Process I/O and Fieldbus Subsystems Surge Protection Intrinsic Safety Interfaces Interfaces for Safety Critical Systems Gas Analysers, Detectors and Systems System Design and Integration MTL7700 IS Barriers MTL5000 IS Isolators EUROPE (EMEA) Tel: +44 (0)1582 723633 Fax: +44 (0)1582 422283 AMERICAS Tel: +1 603 926 0090 Fax: +1 603 926 1899 ASIA PACIFIC Tel: +65 487 7887 Fax: +65 487 7997 Email: enquiry@mtl-inst.com Web site: www.mtlsurge.com A member of the MTL Instruments Group plc 900-040 01