Specify T1, U or BB mountings on line 1 only. Specify L1 and L2 mountings on lines 2, 3 and 4. Project: Type: Qty: FIXT # qty SERIES - OPTICS - MOUNTING - LIGHT ENGINE - CCT - FINISH - VOLTAGE - ACCESS.1 - ACCESS.2-1 OLML- - - - - - - - 2 OLML- - - - - - - - 3 OLML- - - - - - - - 4 OLML- - - - - - - - (L1/L2 only - FIRST specify pole bracket locations on page 3, THEN assign fixture numbers to pole locations below. POLE SERIES - HEIGHT - FINISH - OPT. 1 - OPT. 2 -LOC.1 -LOC.2 -LOC.3 -LOC.4 -LOC.5 -LOC.6 -LOC.7 -LOC.8 - - - - - - - use pulldowns to assign fixture# to pole bracket locations: - - - - - - - Series Optics Mounting Light Engine CCT Finish Voltage Accessories OLML Olivio Medio LED SN FN FM FW Spot Narrow 2x 11 Flood Narrow 2x 13.5 Flood Medium 2x 21 Flood Wide 2x 27.5 T1 Single Pole Top L1 1 Single Pole Bracket L2 1 Double Pole Bracket U Universal (surface mount) BB Buried Base L14 L27 14W LED 27W LED 830 3000 K 840 4000 K 853 5300 K (+/- 300 K) WH White BK Black BZ Bronze SV Silver SP Specify Premium Color 120 277 DS 2 Dark Sky 0 Tilt Option (U mount only) DM Dimming 0-10V 1 Use chart on page 3, codes will be filled in automatically. For use with Ø31/2 2 IDA certified Dark Sky Friendly. For universal mount only. OLM-xx-xxxx-xxx-T1 8 11 /16" (220mm) 1. Housing - Pressure die-cast aluminum two-piece, single captive set screw for easy access. 6 7 /16" (164mm) 3 1 /2" O.D. POLE OLM-xx-xxxx-xxx-U see page 4 for details 2. Gasketing - Continuous silicone gasket between fixture housing and lens base provide IP67 level ingress protection. 3. Lens - Tempered clear glass lens held by mechanical fasteners. 4. Optics - Individual precision injection molded lenses. Lenses provide four different floodlight distributions. Spot narrow 22, flood narrow 27, flood medium 42 and flood wide 55. Lenses are permanently attached to the LED light engine to ensure function over lifetime even in high wind speed and vibration sensitive areas. 5. LED Light Engine - circular LED array with 24 LED mounted to heat sink provides two different light output levels at 27W and 14W. The thermal connection between LED light engine and the lower housing part ensures heat transfer to reach lifetime (L70) of more than 50,000 hours at an ambient temperature of up to 40 C/104 F. LED light engine can be removed for future upgrade. 6. LED Driver - LED light engine is driven by RoHS compliant high-efficiency 120/277V driver. Minimum operation temperature -20 C/-4 F. Using the high output setting, driver can be dimmed via 0-10V for additional energy savings. 7. Surge Protection - Luminaire includes additional surge protection device to protect from indirect lightning strikes, standard Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI. Standard exterior colors are White (WH), Black (BK), Bronze (BZ) and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Hot Dip Galvanized finish (GV) on all steel parts also available. 5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the Selux Olivio LED luminaire shall be free from defects in material and workman-ship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED array when installed and operated according to Selux instructions. Fixture suitable for ambient temperature of 40 C (104 F). For details, see Selux Terms and Condition of Sale. TEL (845) 834-1400 FAX (845) 834-1401 www.selux.us OLML-U-0912-01 (ss-v0.23) NRTL Listed (i.e. UL, CSA) Union Made Affiliated with IBEW Local 363 IP67 Listings & Ratings: Tested to IESNA LM-79-08 and LM-80 test standards at 25 C ambient temperature. IP67. In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
Mounting Configuration Single Pole Top (T1) EPA = 0.7 ft2 (0.065 m2) Weight = 17 lbs. (7.7 kg) Single Pole Bracket (L1) EPA = 1.7 ft2 (0.158 m2) Weight = 25 lbs. (11 kg) For use with Ø31/2 Double Pole Bracket (L2) EPA = 3.4 ft2 (0.316 m2) Weight = 50 lbs. (23 kg) For use with Ø31/2 8 11 /16" (220mm) 6 7 /16" (164mm) Pole Height (16' shown) SCALE: 1/4 in. = 12 in. 3 1 /2" 3 1 /2" 18 7 /8" (480mm) L1/L2 Single/Double pole brackets available with Ø 3.5" poles only (A35) OLML-U-0912-02 (ss-v0.23)
Specify Pole Bracket Mounting Configurations 48" (1219mm) HEIGHT CODE 1 2 3 4 5 6 0 DISTANCE FROM TOP OF POLE Use checkboxes provided in chart below. Columns #0 through #9 indicate heights starting with 4 feet (1219mm) below top of pole and proceeding downwards in increments of 18 inches. Rows A through H indicate angular placement around pole starting with 0 at handhole and proceeding clockwise (top view) at 45 increments. CLOCKWISE FROM HANDHOLE ANGULAR LOCATION CODE (NOTE: If using Adobe Acrobat to enter data [checks] in chart on right, the following instructions will be carried out automatically.) Build up the Pole Bracket Location Codes from chart on right ("Height Code" +"Angular Location Code") i.e. "3C" = 8.5 feet from top of pole, 90 clockwise from handhole. Enter Mounting Arm Location Codes on page 1 in the blanks provided that follow the Pole Option blanks. Example: 3G-3P-4A-5S For use with Ø2 3 /8 to Ø3 1 /2 A 0 B 45 C 90 D 135 E 180 F 225 G 270 H 315 NOTE: Only one pole bracket per height level. Pole brackets located at adjacent levels must be spaced apart at least 45. 0 1 2 3 4 5 6 7 8 9 4' 5.5' 7' 8.5' 10' 11.5' 13' 14.5' 16' 17.5' 7 8 9 B = 45 C = 90 Angular location of mounting arm from handhole at 0 proceeding arount pole clockwise. TOP VIEW D = 135 Handhole A = 0 E = 180 OLML-U-0912-03 (ss-v0.23) H = 315 G = 270 F = 225
Universal Surface Mounting (U) Wall Plate detail 5 1 /2" (140mm) Junction box (by others) (4x) Ø 5 /16" ([4x] Ø8mm) 11 13 /16" (300mm) 11 13 /16" (300mm) 5 1 /2" (140mm) Mounting fasteners (by others) Weight = 17 lbs. (7.7 kg) 8 1 /16" (205mm) Buried Base Mounting (BB) Ø1" (Ø25mm) Mounting bolts by others (4x M8) Note: Wall plate is mounted to surface structure and over junction box (by others) Bolt Circle Conduit Opening Ø 2" (51mm) Bolt Circle Ø 5" 5" Ø3 1 /2" Locks down with (4x) set screws 5 3 /4" (146mm) 5" Ø 7 /16"(4x) (11mm) 12" (305mm) galvanized base Concrete footing to be designed and installed by others. OLML-U-0912-04 (ss-v0.23)
Surface Mounting Refer to individual pole specification sheets for construction details, anchorage information and additional options. A35 Round Straight Aluminum Pole AT535/635 Tapered Aluminum Poles Straight Poles (A35) BC5 Standard Base Cover Two-piece die cast aluminum Ø12 3 /8" (316mm) 4 1 /2" (116mm) Overall Height BC1 Optional Base Cover (A35 & S35) One-piece die cast aluminum 21 5 /8" (550mm) Ø12 5 /8" (320mm) Optional Base Covers for Tapered Poles Die-cast aluminum, two-piece field installable base covers BC3 (AT535) BC9 (AT635) Ø5" 4 1 /2" (112mm) Ø6" (152mm) 8 1 /8" (205mm) Ø12 1 /2" (316mm) 20 3 /8" (518mm) Pole Series Wall EPA Information (ft 2 ) 80 mph 90 mph 100 mph 110 mph Height Finish Options O-A35 O-A35 O-AT635 3 1 /2" Round Straight Aluminum Pole 3 1 /2" Round Straight Aluminum Pole 6" to 3 1 /2" Tapered Aluminum Pole 0.197 0.197 7.3 14.4 5.8 9.4 7.7 7.8 6.4 7.0 5.4 10.9 7.1 5.6 5.6 4.5 4.8 4.0 8.6 3.0 5.5 3.2 3.4 3.1 6.9 2.2 4.4 3.3 3.2 2.4 2.6 12 12 ft. 14 14 ft. 16 16 ft. 18 18 ft. 20 20 ft. 25 25 ft. WH White BK Black BZ Bronze SV Silver SP Specify Premium Color BC1 BC3 BC9 REC Die-cast Decorative Cast Aluminum Base Cover (for A35 poles only) Die-cast Two-Piece Alum. Base Cover (for AT535 poles only) Die-cast Base Cover (for AT635 poles only) GFCI Receptacle with weather-proof cover* * Weatherproof cover intended for portable tools or other portable equipment connected to the outlet only when attended. For other requirements please consult factory. Other pole configurations available, consult factory EPA Calculations allow for 1.3 Gust Factor See Mounting Page for fixture w/arm EPA values OLML-U-0912-05 (ss-v0.23)