PORTABLE WELD PREP MACHINE TOOLS INDUSTRIAL PIPE CUTTING & BEVELING PRODUCTS. ehwachs.com

PORTABLE WELD PREP MACHINE TOOLS INDUSTRIAL PIPE CUTTING & BEVELING PRODUCTS ehwachs.com

Cut. Prep. Weld. ITW Orbital Cutting & Welding U.S. Headquarters WORLD CLASS PRODUCTS ITW Orbital Cutting & Welding manufactures the world s most complete line of portable tube and pipe cutting, facing and beveling products and accessories, in addition to a complete line of advanced high purity orbital welding systems. The group includes E.H. Wachs based in Lincolnshire, Illinois and Orbitalum Tools, based in Singen, Germany. Together we offer our users One Source for the products used to Cut. Prep. Weld. ITW Orbital Cutting & Welding Europe Headquarters E.H. Wachs All New DynaPrep MDSF Split Frame E.H. Wachs is the world s premier manufacturer of portable weld prep machine tools used for pipe cutting, beveling, counterboring and facing. Products include our brand new DynaPrep MDSF, part of the most comprehensive line of split frame pipe cutters and bevelers offered anywhere. Other products include our famous Trav-L-Cutter, Guillotine Pipe Saws, and EP424 and SDB series of end prep machines. Orbitalum Tools (formerly known as GF) is the leading manufacturer of high purity cutting products and orbital welding systems. Products include the GF and GFX series of pipe saws, the RPG series of facing machines, the BRB boiler machines, and the advanced Orbimat 165CA and matching weld heads. For additional information on the complete Orbitalum lineup ask your Wachs representative, request an Orbitalum catalog or learn more at orbitalum.com. Sold and supported worldwide (with most available for rental), ITW Orbital Cutting & Welding products are built to world class standards under ISO 9001. Starting with the finest materials, each and every machine is individually hand assembled and fully tested before shipment. ISO 9001 A DIVISION OF ITW WELDING ITW Orbital Cutting & Welding joins other welding related companies in the ITW Welding products group, further strengthening our position as the premier global supplier of advanced machine tools for tube and pipe. ITW Welding is an operating unit of Illinois Tool Works, a Fortune 150 global industrial manufacturer with operations in 58 countries, 60,000 worldwide employees and annual revenues of $18 billion USD. When you purchase a machine from E.H. Wachs, you gain access to the entire global engineering, sales and product resources of ITW. Other well known names in ITW Welding include Miller Electric based in Appleton, Wisconsin, and Hobart Brothers based in Troy, Ohio. With a complete roster of best in class brands, ITW Welding offers users One Source for integrated welding solutions including weld preparation, pre-heating, welding, insulation and non destructive testing. Orbitalum GF4 Tube & Pipe Saw E.H. WACHS 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

One Source. PRIMARY MARKETS ITW Orbital Cutting & Welding products cover a wide range of applications in a broad spectrum of industries. E.H. Wachs and Orbitalum offer machines and accessories to tackle most projects encountered by the field machinist, including facing, counterboring, flange facing and socket weld removal. Used in construction, maintenance and repair operations (MRO) and decommissioning, our primary industrial markets include: OIL & GAS Upstream, midstream and downstream, anywhere pipe and vessels are employed you ll find Wachs products. Our experience in Oil & Gas dates back to 1949 with the introduction of our revolutionary Trav-L-Cutter designed to replace hot torch cutting and grinding. Today E.H. Wachs remains at the forefront of cold cutting machine tool technology, and is the superior choice anywhere volatile hydrocarbons are present. E.H. Wachs builds machine tools specifically for well head completion, maintenance and repair, and valve exercising and operation. Power Generation Oil and Gas POWER GENERATION The Power Generation industry is characterized by the drive for greater efficiency and power output. Part of this effort involves higher steam pressures, necessitating the use of exotic alloys and heavier wall pipe schedules for safety and durability. E.H. Wachs machine tools are optimized for power generation, and built to deliver more power and precision for these demanding schedules, materials and processes. Many machines are offered with remote control options to remove the operator from risks related to extreme environments. PIPELINE DISTRIBUTION Pipelines and the materials they transport are a vital part of the energy landscape. E.H. Wachs products are ideal for construction, repair and replacement activities on the extensive network of gathering, transportation and distribution pipelines carrying oil, natural gas and petrochemical products. Heavy duty and large diameter split frames and pipe saws are offered to tackle the biggest jobs. Pipeline Distribution HIGH PURITY PROCESS PIPING High Purity includes those industries that make use of high alloy and stainless steel tubing, such as semiconductor, aerospace, pharmaceutical, and food, dairy and beverage. These applications typically require perfectly executed, highly repeatable and measurable welds, often subject to the most rigorous record keeping and inspection requirements. High Purity Process Pipe 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 1

COMPANY Information Early pipe fitting ABOUT E.H. WACHS Designed for onsite cutting, beveling, counterboring and facing of tube, pipe and vessels, E.H. Wachs products are the first choice of machining professionals in the power generation, oil and gas and pipeline distribution industries, among many others. Engineering excellence, precision manufacturing, meticulous hand assembly and support before and after the sale are what set E.H. Wachs products apart. Field machining today with Wachs LCSF All new DynaPrep MDSF machine tool Built on a solid foundation of engineering and manufacturing excellence, we re dedicated to continuing the quality and spirit of innovation pioneered by our founder, Edward H. Wachs, in 1883. All Wachs and Orbitalum products are designed and built to world class standards under ISO 9001:2008, and are sold and supported worldwide. A PARTNER, NOT A COMPETITOR When you purchase an E.H. Wachs product, you re not just buying a tool - you re acquiring ownership in the most complete, versatile portable machining system offered anywhere. This means the equipment you buy today will be supported with the training, service, parts and upgrades that keep these machines working in the field, day in and day out, year after year. We support our standard machines with a great warranty, but support means more at E.H. Wachs. Support starts with expert salesmen, each with years of field experience and knowledge about your industry. Support includes dedicated factory Customer Service representatives who know you and your business. Support includes training options, at your location or ours, by our factory trained technicians. Support also means that, unlike other machine tool manufacturers, when you partner with E.H. Wachs for equipment you re not competing against us for service. ABOUT THIS CATALOG This newest edition of the E.H. Wachs Industrial Catalog highlights the most comprehensive lineup of portable weld prep machine tools we ve ever offered. This expanded edition contains new features including application information, part numbers, descriptions and photos for most of our major product lines. E.H. Wachs standard machines are now available to cover an astonishing range of diameters, from 1/8in up to 120in O.D. (3-3048mm), with additional sizes available by special order. It s organized with O.D. mounted machines such as the Split Frames and Trav-L-Cutter at the front, I.D. mounted machines including the EP 424 and SDB and FF series in the middle, followed by specialized machines like our ECC and EICC Casing Cutters, Weld Coupon Stations and the handheld RS-2 valve operators. We close highlighting Genuine Wachs Tooling, parts and service, technicians and training, and equipment rentals. Machined split frame rings 2 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

CONTENTS ABOUT THE COMPANY 1 O.D. MOUNTED MACHINE TOOLS 5 SDSF SMALL DIAMETER SPLIT FRAME 7 LCSF LOW CLEARANCE SPLIT FRAME 15 DYNAPREP MDSF SPLIT FRAME 27 HDSF HEAVY DUTY SPLIT FRAME 35 LDSF LARGE DIAMETER SPLIT FRAME 39 TRAV-L-CUTTER PIPE CUTTER 43 GUILLOTINE PIPE SAW 49 I.D. MOUNTED MACHINE TOOLS 53 EP 424 END PREP MACHINE 55 SDB SMALL DIAMETER BEVELER 61 FF FLANGE FACER 65 POWER SUPPLIES 71 HYDRAULIC POWER UNITS 72 ELECTRIC POWER DRIVE 74 PNEUMATIC ACCESSORIES 76 SPECIALTY MACHINES 79 SERVICE AND SUPPORT 86 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 3

ADVANCED Cutting DynaPrep form tool cutting MODULAR DESIGN SPLIT FRAME INTRODUCING DYNAPREP As the needs of the field machinist have evolved, E.H. Wachs products have evolved to meet those needs. Our users asked for bigger form tooling capabilities, a more productive user experience, all while delivering greater precision and faster operation. Introducing the DynaPrep MDSF split frame, E.H. Wachs latest example of advanced cutting innovation. Redesigned for more torque Aluminum stationary frame with steel rotating ring DynaPrep tool slides are indexed to the rotating ring Expanding on our industry leading LCSF (Low Clearance Split Frame), DynaPrep represents the pinnacle of cold cutting split frame technology. Retaining the class leading portability and versatility that distinguishes our LCSF, DynaPrep accepts greater power to pull bigger chips, and is built tougher to withstand additional torque. It offers so many patent pending features that make it so easy to use you ll wonder why nobody thought of them before. ADVANCED CONSTRUCTION Unlike solid steel machines, the DynaPrep MDSF retains the advanced light-weight aluminum and steel construction to maintain the portability and one man setup and operation that characterizes our industry-leading LCSF. DynaPrep includes stamped system indexing, where major assemblies are indexed to simplify setup and promote repeatability. The tool slides are indexed to the rotating ring, the trip is indexed to the tool slides, even the tooling advance is indexed. It makes it virtually impossible to damage a valuable split frame by crashing parts together that have been incorrectly setup. ADVANCED INNOVATION The DynaPrep MDSF is the first machine designed from the ground up to conform to the industry trend of moving operators away from rotating machinery. Available remote control pneumatic and electric trips are designed to engage and disengage the starwheel tooling advance. There are new handheld controls for our more powerful air motors, and a handheld pendant control for Wachs EPD (Electric Power Drive,) our portable electric drive unit. The DynaPrep MDSF is yet another in a long string of innovations from the pioneer in portable machining technology. Building on the early success of the Trav-L-Cutter, Wachs introduction of the LCSF split frame set a high bar for all the imitators that would follow. No matter if called a split frame, a clam shell, or a rotating ring cutter, none has matched the success or inspired the loyalty of E. H. Wachs LCSF. Now we ve done it again, setting the bar higher still with the DynaPrep MDSF. 4 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

O.D. Mounted Machine Tools E.H. Wachs machine tools can be specified by the mounting method used - our machines can be broadly divided into O.D. mounted machines and I.D. mounted machines. O.D. mounted machines mount around the outside of a pipe or vessel and, with the exception of Wachs Guillotine saws, are characterized by their ability to simultaneously cut and bevel. This elevates our O.D. mounted machines into the weld prep category, as opposed to the I.D. mounted machines which fall largely into the end prep category. Split frame unbolted for O.D. mounting Split frame bolted together E.H. Wachs O.D. mounted split frames are more than just cutting tools - they re part of a complete machining system designed to handle the most common needs encountered by the field machinist. Properly equipped Wachs split frames can perform a wide range of tasks including counterboring and deep counterboring, flange facing, single point machining, axial and radial socket weld removal, trepanning, and external and internal casing cutting to name just a few. Our O.D. mounted machines include the entire family of Wachs split frames, five distinct series named after their ability to split in half to mount around inline pipe. From smallest to largest they re the SDSF Small Diameter Split Frame, the industry leading LCSF Low Clearance Split Frame, the brand new DynaPrep MDSF, the steel HDSF Heavy Duty Split Frame and the range topping steel LDSF Large Diameter Split Frame, designed for larger tanks and vessels. Other O.D. mounted products include our pioneering cold cutting Trav-L-Cutter, which rotates on its drive tensioning chain and can accommodate virtually limitless diameters by adding additional chain sections. For destructive cutting our proven Guillotine series of reciprocating saws (widely known in the field as the Wachs Saw ) are unmatched for simplicity and durability. Learn more about E.H. Wachs I.D. mounted machines beginning on page 53. Guillotine Super C Wachs Saw Trav-L-Cutter Model HE Hydraulic 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 5

O.D. Mounted Machine Tools - Pipe Ranges ½in 13mm 12in 305mm 24in 610mm 36in 914mm 48in 1219mm 60in 1524mm 72in 1829mm 90in 2286mm 120in 3048mm SDSF 1.0 SDSF 2.0 SDSF LCSF DYNAPREP HDSF LDSF SDSF 3.0 SDSF 4.0 SDSF 5.0 SDSF 6.0 LCSF 206 LCSF 408 LCSF 610 LCSF 612 LCSF 814 LCSF 1016 LCSF 1420 LCSF 1824 LCSF 2228 LCSF 2632 LCSF 3036 LCSF 3642 LCSF 4248 MDSF 612 MDSF 814 MDSF 1016 MDSF 1218 MDSF 1420 MDSF 1824 HDSF 1224 HDSF 2436 HDSF 3648 HDSF 4860 HDSF 6072 HDSF 7284 LDSF 75 LDSF 90 LDSF 105 LDSF 120 TRAV-L- CUTTER MODEL E (PNEUMATIC) MODEL HE (HYDRAULIC) GUILLOTINE SUPER C MODEL D SUPER D GOLIATH 6 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

SDSF Small Diameter Split Frame Axial Tool Slide accessory for socket weld removal Wheel Cutting Module accessory for FME cutting Counterbore attachment fits all models OPTIMIZED FOR LOW-CLEARANCE ENVIRONMENTS E.H. Wachs SDSF Small Diameter Split Frames are the smallest, most compact member of the Wachs split frame family, and are designed for cutting, beveling and counterboring pipe and tubing from OD 0.5in - 6in (DN 15-150). Like all E.H. Wachs split frame clamshell style machines the SDSF is designed to split in half to fit over inline pipe, or can be slipped closed over open ended pipe. Six models are available in 1in (25.4 mm) increments, with additional sizes available by special order. The SDSF serves as the basis of Wachs axial and radial socket weld removal kits that remove the weld without sacrificing the base material, an important consideration in complex assemblies. 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 7

SDSF Small Diameter Split Frame - Overview Wheel cutting Socket Weld Removal PORTABLE PIPE CUTTING AND BEVELING MACHINES (LOW RANGE) SDSF quickly splits open to mount around the OD of inline pipe Machines carbon steel, stainless steel and alloys, e.g. Hastelloy, Inconel and other high-performance materials Cuts and bevels up to 0.438in (11.1 mm) wall thickness Low clearance design requires minimal space for setup and operation Self-squaring pipe clamping system, using either collets or integrated, close tolerance legs with wide feet stability Low friction adjustable bearing system provides maximum stability and extended machine life Fully enclosed bearing and drive gear system for operational safety Infinite motor positioning Modular tool slides Lever type trip actuation for safety Spring loaded axial trip for crash resistance Improved radial trip geometry for crash resistance and durability Improved bearing adjustment design Improved durability in pinion gear bearing arrangement Easier assembly and disassembly of frame halves Improved sealing for chip exclusion Captive fasteners used for all accessories Reduced fastener count for simplified inventory. Only 3 hex wrench sizes required to operate machine All pipes 1in - 6in (DN 15-150) can mount, depending on sizes, using collets or clamp feet SMALL SIZE, BIG CAPABILITIES The SDSF is ideal anywhere pipe and tube are arrayed in tight places and finds many uses in power generation, oil and gas and the shipbuilding industries. The SDSF operates on air or electric power using standard Wachs motors and adapters and is part of a complete system that includes a broad range of tool slides and accessories for maximum versatility. As with all E.H. Wachs products, the Small Diameter Split Frame is built with Wachs legendary quality and durability for years of reliable service. Bevel prep The SDSF, like all Wachs split frames, is designed to simultaneously cut and bevel pipe and tube with Wachs parting and beveling tool slides. It's also the basis of Wachs specialized Socket Weld Removal kits, in both axial and radial configurations. The FME (Foreign Material Exclusion) chipless cutting module makes the SDSF the perfect split frame for the high purity market. So while the SDSF is Wachs smallest split frame, it's big in capabilities. SOCKET WELD REMOVAL SDSF split frames are the building block of Wachs socket weld removal machines. They're designed to remove couplers and elbows from existing piping systems by machining away the weld material that joins them. This is done without sacrificing the base material a vital consideration in the repair or modification of complex process systems. These machines are all new designs incorporating all that we ve learned from years of socket weld removal experience. They re the easiest to use and most productive socket weld removal machines offered anywhere. Front Drive Pinion 8 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

SDSF Small Diameter Split Frame - Specifications FOREIGN MATERIAL EXCLUSION (FME) Wachs FME (Foreign Material Exclusion) is a chipless wheel cutting module designed for use with the SDSF. FME is critical in high purity and process applications where the introduction of chip debris cannot be tolerated. Examples include the food, dairy and pharmaceutical industries and the highly disciplined and controlled power generation field. SPECIFICATIONS UNITS SDSF 1.0 SDSF 2.0 SDSF 3.0 SDSF 4.0 SDSF 5.0 SDSF 6.0 MACHINE CAPACITY OD The machine capacity depends on the mounting system and on the operating method. DIMENSION A mm 127 144.5 174.5 198.5 227 252.4 MACHINE OD inch 5.000 5.688 6.871 7.812 8.938 9.938 DIMENSION B mm 39.7 66.7 95.25 120.7 149.3 174.7 MACHINE ID inch 1.562 2.626 3.750 4.750 5.875 6.875 DIMENSION C mm 88.1 88.1 88.1 88.1 88.1 88.1 PARTING LINE inch 3.468 3.468 3.468 3.468 3.468 3.468 DIMENSION D mm 64.3 54.7 54.7 54.7 54.7 54.7 MACHINE THICKNESS inch 2.530 2.155 2.155 2.155 2.155 2.155 SYSTEM FUNCTION Part off, bevel and counterbore pipe and tube; radial and axial socket weld removal; wheel cutting CUTTING TOOL SURFACE SPEED 10 m/min, 2in 40 sf/m 4in DRIVE OPTIONS Pneumatic or electric AIR REQUIREMENTS [m 3 /min] 1 at 6.2 bar [ft 3 /min] 35 at 90 psi ELECTRICAL REQUIREMENTS 230/120 Volt FEED METHOD Star wheel FEED RATE Fixed at 0.0031in (0.079 mm) per trip CONSTRUCTION Alloy steel TOOL SLIDE Radial or axial feed, cut and bevel, counterbore, FME module TOOL STROKE 11.9 mm (0.468in) FINISH Hard chrome coating TOOLING Axial or radial socket weld removal tooling, cut/bevel tooling. High speed steel or carbide PACKAGING Heavy duty carrying case STANDARD EQUIPMENT Self squaring mounting system, pinion housing, heavy duty watertight carrying case, operating hand tools, operating manuals Electric drive, tooling, axial feed tool slide, radial feed tool slide set, bench OPTIONAL EQUIPMENT mount, front drive pinion housing, counterbore attachment, FME tool slide, aluminum collet sets, clamp pads sets, radial socket weld slide Add frames, slides, collets or legs, drive, collet nut and spanner wrench for complete machine. See individual ring size accessory listings on the following pages. 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 9

SDSF Small Diameter Split Frame - Kits Axial Slide for Socket Weld Removal SDSF SMALL DIAMETER SPLIT FRAME KITS For socket weld removal. STANDARD EQUIPMENT: Frame assemblies 1in and 2in (DN 25 and DN 50) Axial and/or radial feed socket weld removal tool slides 1in and 2in (DN 25 and DN 50) Aluminum collets for pipes with Ø: 0.5in / 0.75in / 1in / 1.25in / 1.5in / 2in (12.7 / 19.05 / 25.4 / 31.75 / 38.1 / 50.8 mm) Clamp foot and extension leg kit for 2in (50.8 mm) frame 1 Air drive Spare fastener kit Storage case Operating hand tools Manual * Machine 25.4 (1in) is collet only. ITEM DRIVETYPE PIPE OD mm inch CODE PART NUMBER SDSF Kit "Axial Feed" Pneumatic 12.7-50.8 0.5-2 ON REQUEST 80-0000-AX SDSF Kit "Radial Feed" Pneumatic 12.7-50.8 0.5-2 ON REQUEST 80-0000-RA Wheel Cutting Module for FME Cutting SPLIT FRAMES Add slides, collets or legs, drive, collet nut and spanner wrench for complete machine. See individual ring size accessory listings on the following pages. STANDARD EQUIPMENT: Individual Split Frame* Pinion housing Storage case Spare fastener kit Hand tools Manual Standard Storage Case ITEM PIPE OD [DN] inch CODE PART NUMBER SDSF Split Frame 1.0* 25 1 980 400 010 80-4000-10 SDSF Split Frame 1.5* / ** 1.5 980 400 015 80-4000-15 SDSF Split Frame 2.0 50 2 980 400 020 80-4000-20 SDSF Split Frame 2.5** 2.5 980 400 025 80-4000-25 SDSF Split Frame 3.0 80 3 980 400 030 80-4000-30 SDSF Split Frame 3.5** 3.5 980 400 035 80-4000-35 SDSF Split Frame 4.0 100 4 980 400 040 80-4000-40 SDSF Split Frame 5.0** 125 5 980 400 050 80-4000-50 SDSF Split Frame 6.0** 150 6 980 400 060 80-4000-60 * Machines 25.4 (1in) and 38.1 (1.5in) is collet only. ** Special sizes on request. Counterbore attachment fits all models 10 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

SDSF Small Diameter Split Frame - Collets ALUMINUM COLLETS AND COLLET ACCESSORIES Please specify when ordering customized tools: Pipe/tube true OD, material (aluminum, delrin, stainless), collet size markings (mm or inch). Collets require collet nut and spanner wrench when purchased with individual SDSF machine. ITEM CODE PART NUMBER Customized aluminum collets for SDSF 1.0 to SDSF 3.5 ON REQUEST ON REQUEST Customized aluminum collets for SDSF 4.0 to SDSF 6.0 ON REQUEST ON REQUEST Collet kit for SDSF 1.0 Includes: aluminum collets for pipe OD: 0.5in, 0.75in, 1in (12.7, 19.05, 25.4 mm) 1 collet nut 980 520 110 80-5201-10 1 spanner wrench Collet kit for SDSF 1.5 Includes: aluminum collets for pipe OD: 1in, 1.25in, 1.5in (25.4, 31.75, 38.1 mm) 1 collet nut 980 520 115 80-5201-15 1 spanner wrench Collet kit for SDSF 2.0 Includes: aluminum collets for pipe OD: 1.25in, 1.5in, 2in (31.75, 38.1, 50.8 mm) 1 collet nut 980 520 120 80-5201-20 1 spanner wrench Collet kit for SDSF 2.5 Includes: aluminum collets for pipe OD: 1.5in, 2in, 2.5in (38.1, 50.8, 63.5 mm) 1 collet nut 980 520 125 80-5201-25 1 spanner wrench Collet kit for SDSF 3.0 Includes: aluminum collets for pipe OD: 2in, 2.5in, 3in (50.8, 63.5, 76.2 mm) 1 collet nut 980 520 130 80-5201-30 1 spanner wrench Collet kit for SDSF 3.5 Includes: aluminum collets for pipe OD: 2.5in, 3in, 3.5in (63.5, 76.2, 88.9 mm) 1 collet nut 980 520 135 80-5201-35 1 spanner wrench Collet kit for SDSF 4.0 Includes: aluminum collets for pipe OD: 3in, 3.5in, 4in (76.2, 88.9, 101.6 mm) 1 collet nut 980 520 140 80-5201-40 1 spanner wrench Collet kit for SDSF 5.0 Includes: aluminum collets for pipe OD: 4in, 5in (101.6, 127.0 mm) 1 collet nut 980 520 150 80-5201-50 1 spanner wrench Collet kit for SDSF 6.0 Includes: aluminum collets for pipe OD: 5in, 6in (127.0, 152.4 mm) 1 collet nut 980 520 160 80-5201-60 1 spanner wrench Collet nut for SDSF 1.0 980 000 710 80-0007-10 Collet nut for SDSF 1.5 980 000 715 80-0007-15 Collet nut for SDSF 2.0 980 000 720 80-0007-20 Collet nut for SDSF 2.5 980 000 725 80-0007-25 Collet nut for SDSF 3.0 980 000 730 80-0007-30 Collet nut for SDSF 3.5 980 000 735 80-0007-35 Collet nut for SDSF 4.0 980 000 740 80-0007-40 Collet nut for SDSF 5.0 980 000 750 80-0007-50 Collet nut for SDSF 6.0 980 000 760 80-0007-60 Spanner wrench for SDSF 1.0 to SDSF 2.5 990 800 780 90-800-78 Spanner wrench for SDSF 3.0 to SDSF 4.0 990 800 790 90-800-79 Spanner wrench for SDSF 5.0 to SDSF 6.0 990 800 800 90-800-80 Aluminum Collet Collet nut for SDSF Spanner Wrench for SDSF Radial Feed Tool Slide Kit 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 11

SDSF Small Diameter Split Frame - Slides Axial socket weld removal slide Radial socket weld removal slide Counterbore Tool Slide TOOL SLIDE AND TRIP ASSEMBLIES Tool slide and trip assemblies for SDSF 1.0 ITEM CODE PART NUMBER Radial feed parting tool slide. 980 410 110 80-4101-10 Radial feed beveling tool slide. 980 410 210 80-4102-10 Radial feed tool slide trip assembly. For SDSF 1.0 to SDSF 6.0. 980 410 300 80-4103-00 Radial feed tool slide kit. Includes: 1 parting slide 980 510 110 80-5101-10 1 beveling slide 1 trip assembly Radial feed socket weld removal tool slide. Used with the SDSF for removal of socket welds, the radial slide requires less axial clearance. The tooling is advanced to the pipe center line (radially) to remove the weld material. Also available as a 980 410 010 80-4100-10 complete Radial Socket Weld Removal Kit. Axial feed socket weld removal tool slide. Used with the SDSF for removal of socket welds, the axial slide requires less radial clearance. The tooling is advanced axially along the pipe to remove the weld material. Also available as a complete 980 410 410 80-4104-10 axial socket weld removal kit. Axial feed tool slide trip assembly. For SDSF 1.0 to SDSF 6.0. 980 410 500 80-4105-00 Axial feed tool slide kit. Includes: 1 axial slide 980 510 210 80-5102-10 1 trip assembly Universal counterbore slide. Designed for perfect counterboring of the pipe or tube inside diameter, the universal counterbore fits all Wachs SDSF ring set. Utilizes a simple and effective hand advance to precisely control the counterbore. 980 410 700 80-4107-00 For SDSF 1.0 to SDSF 6.0. Tool slide and trip assemblies for SDSF 1.5, SDSF 2.0 and SDSF 2.5 Radial feed parting tool slide (Standard). 980 410 120 80-4101-20 Radial feed beveling tool slide (Standard). 980 410 220 80-4102-20 Radial feed tool slide trip assembly (Standard). For SDSF 1.0 to SDSF 6.0. 980 410 300 80-4103-00 Radial feed tool slide kit (Standard). Includes: 1 parting slide 980 510 120 80-5101-20 1 beveling slide 1 trip assembly Radial feed socket weld removal tool slide (Standard). 980 410 020 80-4100-20 Axial feed socket weld removal tool slide (Standard). 980 410 420 80-4104-20 Axial feed tool slide trip assembly (Standard). For SDSF 1.0 to SDSF 6.0. 980 410 500 80-4105-00 Axial feed tool slide kit. Includes: 1 axial slide 980 510 220 80-5102-20 1 trip assembly Universal counterbore slide (Standard). For SDSF 1.0 to SDSF 6.0. 980 410 700 80-4107-00 Tool slide and trip assemblies for SDSF 3.0, SDSF 3.5 and SDSF 4.0 Radial feed parting tool slide (Standard). 980 410 140 80-4101-40 Radial feed beveling tool slide (Standard). 980 410 240 80-4102-40 Radial feed tool slide trip assembly (Standard). 980 410 300 80-4103-00 Radial feed tool slide kit (Standard). Includes: 1 parting slide 980 510 140 80-5101-40 1 beveling slide 1 trip assembly Trip assembly (Standard). 980 410 440 80-4104-40 12 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

SDSF Small Diameter Split Frame - Power ITEM CODE PART NUMBER Tool slide and trip assemblies for SDSF 3.0, SDSF 3.5 and SDSF 4.0 (Continued) Axial feed tool slide trip assembly (Standard). For SDSF 1.0 to SDSF 6.0. 980 410 500 80-4105-00 Axial feed tool slide kit (Standard). Includes: 1 axial slide 980 510 240 80-5102-40 1 trip assembly Universal counterbore slide (Standard). For SDSF 1.0 to SDSF 6.0. 980 410 700 80-4107-00 Tool slide and trip assemblies for SDSF 5.0 and SDSF 6.0 Radial feed parting tool slide (Special). 980 410 160 80-4101-60 Radial feed beveling tool slide (Special). 980 410 260 80-4102-60 Radial feed tool slide trip assembly (Standard). For SDSF 1.0 to SDSF 6.0. 980 410 300 80-4103-00 Radial feed tool slide kit (Special). Includes: 1 parting slide 980 510 160 80-5101-60 1 beveling slide 1 trip assembly Axial feed socket weld removal tool slide (Special). 980 410 460 80-4104-60 Axial feed tool slide trip assembly (Standard). For SDSF 1.0 to SDSF 6.0. 980 410 500 80-4105-00 Axial feed tool slide kit (Special). Includes: 1 axial slide 980 510 260 80-5102-60 1 trip assembly FME (foreign material exclusion) slide (Special). 980 410 660 80-4106-60 FME cutting wheel. 980 005 300 80-0053-00 MOTORS AND MISCELLANEOUS ACCESSORIES ITEM TO UTILIZE WITH SDSF 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 CODE PART NUMBER Universal right angle air drive motor. x x x x 980 400 400 80-4004-00 Electric motor. For SDSF 120 V - 1500 W x x x x x x x x x 900 002 015 80-4005-01 Electric motor. For SDSF 230 V - 1500 W x x x x x x x x x 900 002 002 80-4006-01 Front drive pinion housing assembly. x 980 400 310 80-4003-10 Front drive pinion housing assembly. x 980 400 315 80-4003-15 Front drive pinion housing assembly. x 980 400 320 80-4003-20 Front drive pinion housing assembly. x 980 400 325 80-4003-25 Front drive pinion housing assembly. x 980 400 330 80-4003-30 Front drive pinion housing assembly. x 980 400 335 80-4003-35 Front drive pinion housing assembly. x 980 400 340 80-4003-40 Front drive pinion housing assembly. x 980 400 350 80-4003-50 Front drive pinion housing assembly. x 980 400 360 80-4003-60 Universal spare fastener kit.* x x x x x x x x x 980 550 000 80-5500-00 Clamp foot and extension leg set. Includes: 4 each clamp foot (980 400 100) 4 each extension legs 0.31in (7.9 mm) (980 007 x x x x x x x 980 500 100 80-5001-00 800) 4 each extension legs 0.56in (14.2 mm) (980 007 801) Axial feed tool slide trip assembly. x x x x x x x x x 980 400 330 80-4003-30 Universal manual. x x x x x x x x x 980 626 010 80-MAN-01 * Kit BOM's subject to change based on current production configuration. Universal Right Angle Pneumatic Drive Motor Electric Motor for SDSF Clamp Foot and Extension Leg Set 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 13

SDSF Small Diameter Split Frame - Tooling UNIVERSAL TOOLING Cutting, bevel, counterbore, radial and axial socket weld removal. Parting tooling standard Bevel tooling extended reach 30º Counterbore tool taper 4:1 FME cutting wheel Parting Tooling Low clearance Standard Extended reach Bevel Tooling Standard 37.5º Extended reach 37.5º Extended reach 30º Extended reach 45º ITEM Low clearance 37.5º, outside Standard 37.5º, outside Universal Counterbore Tool DIMENSIONS LENGTH mm inch mm inch 3.2 x 12.7 3.2 x 12.7 3.2 x 12.7 9.5 x 12.7 9.5 x 12.7 9.5 x 12.7 9.5 x 12.7 9.5 x 25.4 9.5 x 25.4 1/8 x 1/2 1/8 x 1/2 1/8 x 1/2 3/8 x 1/2 3/8 x 1/2 3/8 x 1/2 3/8 x 1/2 CODE PART NUMBER 41.4 1.63 980 700 101 80-7001-01 54.1 2.13 980 700 102 80-7001-02 66.8 2.63 980 700 103 80-7001-03 54.1 2.13 952 710 020 52-710-02 66.8 2.63 952 710 030 52-710-03 67.8 2.67 952 705 010 52-705-01 67.8 2.67 952 705 030 52-705-03 3/8 x 1 41.4 1.63 980 700 801 80-7008-01 3/8 x 1 54.1 2.13 980 700 802 80-7008-02 Counterbore tool taper 4:1 (14º) 980 700 301 80-7003-01 Socket Weld Removal Tooling, Radial Feed Standard, radial 980 700 601 80-7006-01 Extended reach, radial 980 700 602 80-7006-02 Low clearance, radial 980 700 603 80-7006-03 Socket Weld Removal Tooling, Axial Feed Standard, axial 9.5 x 9.5 Standard, HSS tool bit, axial. For single point facing, beveling and flange facing. For use with EP 424, LCSF/3, FF, SWR and SDSF machines. Standard, axial. Offset dogleg. With 1in (25.4 mm) extension. 9.5 x 9.5 9.5 x 9.5 Standard, carbide, axial. 9.5 x 9.5 Extended reach, axial 9.5 x 9.5 Extended reach, axial. Offset dogleg. With 1 1/4in (31.8 mm) extension. FME cutting wheel. For chipless cutting. 9.5 x 9.5 3/8 x 3/8 3/8 x 3/8 3/8 x 3/8 3/8 x 3/8 3/8 x 3/8 3/8 x 3/8 50.8 2.0 980 700 702 80-7007-02 952 701 010 52-701-01 38.1 1.5 952 701 020 52-701-02 25.4 1.0 952 702 010 52-702-01 63.5 2.5 980 700 703 80-7007-03 952 701 030 52-701-03 980 005 300 80-0053-00 RECOmmENDED ACCESSORIES FOR SDSF 1.0 TO SDSF 6.0 ITEM CODE PART NUMBER ATM house. 980 420 200 80-4202-00 Wrench 7/16in (11.1 mm) hex through torque. 990 800 840 90-800-84 Bevel slide cover assembly. For use with outside bevel tooling. 980 410 800 80-4108-00 CUTTING LUBRICATION Cutting lubrication "KSS-TOP", see page 48. Cutting lubrication KSS-TOP 14 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

LCSF Low Clearance Split Frame Designed for portability and limited clearance Full range 2in - 48in for pipe and tube Optional Bridge Slide for heavy wall pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs LCSF Low Clearance Split Frame is the world s most versatile and comprehensive line of lightweight split frame, clamshell style portable machine tools on the market today. Designed to cut, bevel, single point, counterbore and face flanges on pipe and tube ranging from 2in - 48in (DN50 - DN1200) OD (Outside Diameter) on most wall thicknesses and materials, Wachs slim yet rugged LCSF design is ideal where radial and axial clearances are restricted. 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 15

LCSF Low Clearance Split Frame PORTABLE PIPE CUTTING AND BEVELING MACHINES Twelve LCSF basic models cover OD from 2in - 48in (DN 50 to DN 1200) Low clearance design requires minimal space for setup and operation Designed to split open to mount around the OD of inline pipe Fully enclosed bearings and drive gears for safety and durability Tool slides and accessories are interchangeable between many LCSF sizes Hot torch cut before machining COLD CUTTING The LCSF is ideal for all types of pipe cutting, beveling and end prepping. The Split Frames are named for their ability to split in half at the frame or "break open" and bolt back together again. This allows them to open and mount around the OD of inline piping or they can be slipped closed over open ended pipe. The LCSF has been engineered to apply precise, consistently square cuts and bevels on pipe, tube and casing the first time, every time. Like all Wachs cutting machines, the LCSF Split Frame utilizes a cold cutting machining process, a safe, clean operation that minimizes the risk of explosion. Hot torch cutting and grinding typically creates a heat affected zone (HAZ) and introduces airborne contaminants into the environment, unacceptable in many worksites and a potential health hazard. Weld ready after machining COMPLETE MACHINING SYSTEM The LCSF is the foundation of a complete machining system, a system that includes multiple drive options, hydraulic power units, bridge slides, counterbore attachments and a wide range of tooling and tool slides. These include low clearance slides, extended and super extended slides, worm gear slides for heavy wall applications and out-of-round tracking slides that minimize setup and machining time. The LCSF is able to handle virtually any cutting and beveling application encountered in the field, including tight clearances, heavy wall pipe or high alloy material. Wachs allows you to take on the most challenging prep with confidence, as the correct power source, drive, tool slides and tooling are never more than a phone call away. E.H. Wachs LCSF machines are offered as complete kits, with your choice of pneumatic, hydraulic or, by special order electric drive, or as basic ring sets. Kits are the more popular choice, as they include the components typically required including drive, tool slides, trips, hand tools and more. But if you already own Wachs drive motors and tool slides, individual ring sets can economically expand your split frame range. Ideal for a wide range of industries, the LCSF is found in fossil, co-gen and nuclear power plants for outages, steam generator replacements and general plant maintenance. They're used in oil, gas and petrochemical to minimize the risk of explosion and anywhere that safe, high quality, repeatable weld preps are required. It's the most complete pipe cutting and beveling machining system available today. Heavy duty storage case Like all Wachs machines, the LCSF is built to last. Steel gear sets, fully enclosed for safety and durability, ride on full roller bearings to handle the rigors of today's demanding preps on today's demanding materials. Strong yet light, the LCSF machines with a speed and precision others can't match. 16 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

LCSF Low Clearance Split Frame IMPORTANT: Product training is recommended for safe operation of the LCSF split frame. Please contact your E.H. Wachs representative for details. Specifications 206/3 408/3 612/3 814/3 1016/3 1420/3 1824/3 2228/3 2632/3 3036/3 3642/3 4248/3 Machine capacity 168.3-1067 - Pipe OD Metric mm 60.3-168.4 114.3-219.2 219.1-355 273.1-406.4 355.6-508 457-610 558-711 660-813 762-914 914-1067 323.85 1219 Pipe NPS inch 2-6 4-8 6-12 8-14 10-16 14-20 18-24 22-28 26-32 30-36 36-42 42-48 Dimensions A dimension mm 174.75 225.55 330.20 361.95 412.75 514.35 622.30 723.90 825.5 927.1 1079.50 1231.90 inch 6.88 8.88 13.0 14.25 16.25 20.25 24.50 28.50 32.50 36.50 42.50 48.50 Extended tool slide tool stroke 1.5in (38.1 mm) using slide 960 415 000 or 960 416 000 B dimension mm 163.83 216.15 277.88 290.83 322.58 373.38 422.40 473.20 524.00 574.80 651.3 727.5 inch 6.45 8.51 10.94 11.45 12.70 14.70 16.63 18.63 20.63 22.63 25.64 28.64 C dimension mm 152.40 152.40 152.40 152.40 152.40 152.40 177.80 177.80 177.80 177.80 177.8 177.8 inch 6.00 6.00 6.00 6.00 6.00 6.00 7.00 7.00 7.00 7.00 7.00 7.00 Super extended tool slide tool stroke 2in (50.8 mm) using slide 960 437 000 or 960 438 000 B dimension mm 482.60 533.40 584.20 635.00 711.20 787.40 inch 19.00 21.00 23.00 25.00 28.00 31.00 C dimension mm 177.80 177.80 177.80 177.80 177.80 177.80 inch 7.00 7.00 7.00 7.00 7.00 7.00 Weights Machine kg 16.78 19.50 28.57 33.11 39.91 46.72 79.38 90.72 104.32 117.93 140.60 163.29 lbs 37 43 63 73 88 103 175 200 230 260 310 360 Shipping kg 43.5 43.5 57 64 75 87.5 226 235 244 239.5 271 304 lbs 96 96 125 141 165 193 499 520 538 528 597 670 Shipping dimensions Without accessories [cm] 31x81x53 31x81x53 31x81x53 61x81x51 48x107x61 61x81x51 61x122x74 64x122x74 64x122x74 61x122x74 81x152x97 79x155x97 inch 12x32x21 12x32x21 12x32x21 24x32x20 19x42x24 24x32x20 24x48x29 25x48x29 25x48x29 24x48x29 32x60x38 31x61x38 Standard equipment for complete machines: Rotating ring set, heavy drive (pneumatic, hydraulic or electric), self squaring mounting system, set of extension legs, parting tool slide, beveling tool slide, star wheel feed mechanism, fitted storage case, operating hand tools, operating manuals. LCSF 206/3 up to 814/3 contain 1.5HP 1.1 kw pneumatic motor. LCSF 1016/3 up to 4248/3 contain 2.5 HP 1.8 kw pneumatic motor. LCSF 206/3 up to 1420/3 contain extended (1.5 inch) parting and beveling tool slides. LCSF 1824/3 up to 4248/3 contain super extended (2 inch) parting and beveling tool slides. Clamp pads Rotating ring set 206 408 612 814 1016 1420 1824 2228 2632 3036 3642 4248 Self squaring mounting system [jaws] 4 4 4 4 4 4 8 8 8 8 8 8 [set of] 4 each 4 each 4 each 4 each 4 each 4 each 8 each 8 each 8 each 8 each 8 each 8 each Extension legs mm inch 12.7 25.4 38.1 50.8 0.5 1.0 1.5 2.0 25.4 50.8 1.0 2.0 25.4 50.8 76.2 1.0 2.0 3.0 12.7 38.1 63.5 0.5 1.5 2.5 25.4 38.1 63.5 1.0 1.5 2.5 Optional equipment Bridge slide for single point beveling of heavy wall pipe, low clearance tool slides, extended tool slides, worm gear tool slides, pneumatic, hydraulic or electric drive options, extension legs for pipe, elbows and fittings and thin wall applications, tooling for all prep configurations. Other specifications Cutting tool surface 18 m/min (60 ft/min) speed Drive options Pneumatic, hydraulic or electric Air requirements 1.7 m 3 /min at 6.2 bar (65 ft 3 /min at 90 psi) Hydraulic requirements 31 l/min at 104 bars (8 gal/min at 1,500 psi) Feed method Star wheel Feed rate Fixed at 0.0026 inch (0.066 mm) per trip Finish Hard chrome plating 25.4 50.8 76.2 1.0 2.0 3.0 25.4 50.8 76.2 1.0 2.0 3.0 25.4 50.8 76.2 1.0 2.0 3.0 25.4 50.8 76.2 1.0 2.0 3.0 25.4 50.8 76.2 1.0 2.0 3.0 25.4 50.8 76.2 1.0 2.0 3.0 25.4 50.8 76.2 1.0 2.0 3.0 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 17

LCSF Low Clearance Split Frame Simultaneous parting and beveling LCSF used in oil and gas Ideal tool for pipe maintenance and repair projects LCSF MACHINE RANGES ITEM DRIVETYPE PIPE OD RANGE METRIC mm CODE PART NUMBER LCSF 206/3 Pneumatic 50.8-168.4 2-6 960 247 060 60-AIR-06 LCSF 206/3 Hydraulic 50.8-168.4 2-6 960 493 060 60-HYD-06 LCSF 206/3 Electric 50.8-168.4 2-6 ON REQUEST ON REQUEST LCSF 408/3 Pneumatic 92.2-219.2 4-8 960 247 080 60-AIR-08 LCSF 408/3 Hydraulic 92.2-219.2 4-8 960 493 080 60-HYD-08 LCSF 408/3 Electric 92.2-219.2 4-8 ON REQUEST ON REQUEST LCSF 612/3 Pneumatic 139.7-323.85 6-12 960 247 120 60-AIR-12 LCSF 612/3 Hydraulic 139.7-323.85 6-12 960 493 120 60-HYD-12 LCSF 612/3 Electric 139.7-323.85 6-12 ON REQUEST ON REQUEST LCSF 814/3 Pneumatic 196.85-355 8-14 960 247 140 60-AIR-14 LCSF 814/3 Hydraulic 196.85-355 8-14 960 493 140 60-HYD-14 LCSF 814/3 Electric 196.85-355 8-14 ON REQUEST ON REQUEST LCSF 1016/3 Pneumatic 247.65-406.4 10-16 960 247 160 60-AIR-16 LCSF 1016/3 Hydraulic 247.65-406.4 10-16 960 493 160 60-HYD-16 LCSF 1016/3 Electric 247.65-406.4 10-16 ON REQUEST ON REQUEST LCSF 1420/3 Pneumatic 324-508 14-20 960 247 200 60-AIR-20 LCSF 1420/3 Hydraulic 324-508 14-20 960 493 200 60-HYD-20 LCSF 1420/3 Electric 324-508 14-20 ON REQUEST ON REQUEST LCSF 1824/3 Pneumatic 425-610 18-24 960 247 240 60-AIR-24 LCSF 1824/3 Hydraulic 425-610 18-24 960 493 240 60-HYD-24 LCSF 1824/3 Electric 425-610 18-24 ON REQUEST ON REQUEST LCSF 2228/3 Pneumatic 527-711 22-28 960 247 280 60-AIR-28 LCSF 2228/3 Hydraulic 527-711 22-28 960 493 280 60-HYD-28 LCSF 2228/3 Electric 527-711 22-28 ON REQUEST ON REQUEST LCSF 2632/3 Pneumatic 527-711 26-32 960 247 320 60-AIR-32 LCSF 2632/3 Hydraulic 527-711 26-32 960 493 320 60-HYD-32 LCSF 2632/3 Electric 527-711 26-32 ON REQUEST ON REQUEST LCSF 3036/3 Pneumatic 730-914 30-36 960 247 360 60-AIR-36 LCSF 3036/3 Hydraulic 730-914 30-36 960 493 360 60-HYD-36 LCSF 3036/3 Electric 730-914 30-36 ON REQUEST ON REQUEST LCSF 3642/3 Pneumatic 883-1067 36-42 960 247 420 60-AIR-42 LCSF 3642/3 Hydraulic 883-1067 36-42 960 493 420 60-HYD-42 LCSF 3642/3 Electric 883-1067 36-42 ON REQUEST ON REQUEST LCSF 4248/3 Pneumatic 1035-1219 42-48 960 247 480 60-AIR-48 LCSF 4248/3 Hydraulic 1035-1219 42-48 960 493 480 60-HYD-48 LCSF 4248/3 Electric 1035-1219 42-48 ON REQUEST ON REQUEST TYPICAL STANDARD TOOLING: Parting tool, e.g. length: 5in (Part Number 43-711-01). For further "Cutting tooling" see page 24. NPS inch Bevel tool, e.g. 30º, length: 5in (Part Number 53-703-01). For further "Bevel tooling" see page 24. LCSF counterboring 18 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

LCSF Low Clearance Split Frame BASIC MACHINE PARTS, NECESSARY FOR CUTTING AND BEVELING: Rotating ring set: Version LCSF 1420/3 Right angle air drive ACM + LCSF air throttle Parting tool, e.g. length: 5in Bevel tool, e.g. 30º, length: 5in Extended (1.5 inch) tool slide set ROTATING RING SETS (SPLIT FRAMES) Add slides and drive for complete machine. Leg extensions for full clamping range now included with ring. Rotating ring set Includes: Self squaring mounting system (4- or 8-jaw) Pinion housing assembly Operating hand tools Carrying case Operating manual PIPE OD JAWS ITEM MODEL METRIC mm NPS inch [QTY.] CODE PART NUMBER Rotating ring set LCSF 206/3 50.8-168.4 2-6 4 960 000 060 60-000-06 Rotating ring set LCSF 408/3 92.2-219.2 4-8 4 960 000 080 60-000-08 Rotating ring set LCSF 612/3 139.7-323.85 6-12 4 960 000 120 60-000-12 Rotating ring set LCSF 814/3 196.85-355 8-14 4 960 000 140 60-000-14 Rotating ring set LCSF 1016/3 247.65-406.4 10-16 4 960 000 160 60-000-16 Rotating ring set LCSF 1420/3 324-508 14-20 4 960 000 200 60-000-20 Rotating ring set LCSF 1824/3 425-610 18-24 8 960 000 240 60-000-24 Rotating ring set LCSF 2228/3 527-711 22-28 8 960 000 280 60-000-28 Rotating ring set LCSF 2632/3 629-813 26-32 8 960 000 320 60-000-32 Rotating ring set LCSF 3036/3 730-914 30-36 8 960 000 360 60-000-36 Rotating ring set LCSF 3642/3 883-1067 36-42 8 960 000 420 60-000-42 Rotating ring set LCSF 4248/3 1035-1219 42-48 8 960 000 480 60-000-48 NEW: Electric Power Drive (EPD), see page 74 DRIVE MOTORS AND EQUIPMENT Add one of the following to rotating ring: ITEM FOR LCSF MODELS CODE PART NUMBER Right angle air drive. 1.1 kw (1.5 hp). 206/3-814/3 960 423 000 60-423-00 Right angle air drive. 1.9 kw (2.5 hp). 1016/3-4248/3 960 423 010 60-423-01 Hydraulic drive. 204/3-4248/3 960 424 010 60-424-01 Hydraulic motor. For usage of LCSF Split Frames operating with hydraulic power unit (see page 72). 204/3-4248/3 960 424 020 60-424-02 Air Control Module ACM (see page 76). For all models 960 420 000 60-420-00 Hydraulic hoses. 1 pair, Length: 15 m (49.2 ft) For all models 790 500 510 03-404-00 Front drive pinion housing. 408/3 to 1420/3 960 425 030 60-425-03 Front drive pinion housing. 1824/3 to 4248/3 960 425 040 60-425-04 Air treatment module For all models 69-4102-00 Compressed air drive 2.5 HP complete, reversible For all models 960 401 001 60-4010-01 EPD Electric Power Drives for LCSF, see page 74. Pneumatic drive motor Hydraulic drive motor 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 19

LCSF Low Clearance Split Frame TOOL SLIDE ASSEMBLIES Add one of the following tool slide assemblies to the rotating ring: LCSF extended tool slide set Low clearance tool slide set For LCSF 206/3 to LCSF 1420/3. Includes: 1 low clearance parting tool slide 1 low clearance beveling tool slide 1 star wheel feed trip mechanism Extended (1.5 inch) tool slide set For LCSF 206/3 to LCSF 1420/3 and low clearance slides for LCSF 1824/3 to LCSF 4248/3. Includes: 1 extended (1.5 inch) parting tool slide 1 extended (1.5 inch) beveling tool slide 1 star wheel feed trip mechanism 2 star wheel feed extension blocks Super extended (2 inch) tool slide set For LCSF 1824/3 to LCSF 4248/3. Includes: 1 super extended (2 inch) parting tool slide 1 super extended (2 inch) beveling tool slide 1 star wheel feed trip mechanism 2 star wheel feed extension blocks ITEM CODE PART NUMBER 960 421 040 60-421-04 960 422 010 60-422-01 960 440 000 60-440-00 WORM SLIDE ASSEMBLIES For LCSF 1824/3 up to LCSF 4248/3. LCSF super extended tool slide set Worm gear slides for heavy wall pipe Recommended for heavy wall applications > 1.5in (38.1 mm). ITEM CODE PART NUMBER Worm slide starter kit "parting" Includes: 1 worm slide kit 1 worm slide heavy wall parting holder kit 900 002 008 2 heavy wall carbide insert tooling kit 10 insert tool bits 8 mm/0.313in Worm slide kit Includes: 1 parting slide 1 bevel slide 2 trip assemblies 2 extension blocks 960 430 000 60-430-00 spare fasteners Utilizes all standard LCSF parting and beveling blades. Note: heavy wall parting > 1.5in (38.1 mm) requires parting tool holder kit and carbide parting tooling kit. Worm slide heavy wall parting holder kit Includes: 1 each low and high insert holder 1 cover 960 433 000 60-433-00 fasteners Utilizes carbide insert holders. Heavy wall carbide insert tooling kit Includes: 1 insert holder 1 insert 1 insert extractor. 960 712 000 60-712-00 Used with the worm slides or spring slides. For 24in - 48in (609.6-1219.2 mm) LCSF machines. Insert tool bit 0.313in (8 mm) For use with tooling kit. 960 713 000 60-713-00 LCSF with worm slide assembly 20 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com

LCSF Low Clearance Split Frame OD TRACKING SLIDES OD tracking module. ITEM FOR LCSF MODELS CODE PART NUMBER OD tracking tool slide set Includes: 2 OD tracking tool slides: 1 tool slide parting (960 446 010) and 1 tool slide 1824/3-4248/3 960 446 000 60-446-00 parting/beveling (960 446 020) 1 trip assembly with corrosion protection Fasteners Parting tool slide, OD tracking. 1824/3-4248/3 960 446 010 60-446-01 Beveling tool slide, OD tracking. 1824/3-4248/3 960 446 020 60-446-02 OD tracking trip. 1824/3-4248/3 960 446 030 60-446-03 OD tracking tool slide set. 610/3-1420/3 960 451 000 60-451-00 Out of round slides PINION HOUSING ASSEMBLIES Included in LCSF ring sets. ITEM FOR LCSF MODELS CODE PART NUMBER Pinion housing assembly. LCSF 206/3 - LCSF 1420/3 960 412 000 60-412-00 Pinion housing assembly. LCSF 1824/3, LCSF 2228/3, LCSF 2632/3, LCSF 3036/3, LCSF 960 409 000 60-409-00 3642/3, LCSF 4248/3 Front drive pinion housing. LCSF 408/3 - LCSF 1420/3 960 425 030 60-425-03 Front drive pinion housing. LCSF 1824/3 - LCSF 4248/3 960 425 040 60-425-04 Pinion housing assembly TRIP ASSEMBLY Upgrades LCSF Split Frame Machines for safer operation (included in tool slide sets, opposite page). ITEM FOR LCSF MODELS CODE PART NUMBER Trip Assembly. LCSF 206-1420 960 401 000 60-401-00 Trip Assembly. LCSF 1824-4248 960 434 000 60-434-00 Front drive pinion housing SINGLE SIZE EXTENSION LEG SETS LCSF 206/3 up to LCSF 1420/3: 1 set of 4 each. LCSF 1824/3 up to LCSF 4248/3: 2 sets of 4 each. ITEM DIMENSION mm inch CODE PART NUMBER Single size extension leg set 12.7 1/2 960 408 050 60-408-05 Single size extension leg set 19.1 3/4 960 408 070 60-408-07 Single size extension leg set 25.4 1 960 408 100 60-408-10 Single size extension leg set 38.1 1 1/2 960 408 150 60-408-15 Single size extension leg set 50.8 2 960 408 200 60-408-20 Single size extension leg set 63.5 2 1/2 960 408 250 60-408-25 Single size extension leg set 76.2 3 960 408 300 60-408-30 Trip assembly Single size extension leg set 600 KNIGHTSBRIDGE PARKWAY LINCOLNSHIRE, ILLINOIS 60069 T:+1.847.537.8800 F:+1.847.520.1147 SALES@EHWACHS.COM ehwachs.com 21