DISTRIBUTION CABINETS MSP6& MST6 Universal distribution cabinets for outdoor and indoor use in FTTX networks, industrial, corporation and public networks (e.g. for municipal monitoring with application of fiber optic or copper cables). Cabinets have a high protection level IP66, mechanical resistance IK-10, flames resitance UL94-V0 and they comply requirements of the directive 2002/95/WE (RoHS) concerning content of deleterious substances. Housings MST 6 of dimensions 400x600x250mm are made of steel plates powder painted, colour RAL 7035. Steel cabinets have a certificate of security ATEX Ex for danger of explosion zones. Cabinets are delivered with doors on hinges, with patented lock and components for wall mounting. Custom ordrers available 42
MSP 6/X MST 6/X Fiber optic distribution cabinets are equipped with organiser tray s KSP12 lifting module (max 6 on 144 on splices), sliding distribution module of capacity from 96 standard adapters up to 144 adapters SC-E2000 Small Flange and components for cables installation and organisation. Distribution module incorporates interchangeable bar PS-010 adapters installation, latches fixed. Mounting board of the cabinet incorporates mounting jonctions enabling instalation of box splitters modules terminated with pigtails with optical connectors (max 2 splitters 2x64), or other passive or active devices according to users requirements. Cabinets may be equipped with cable glands from above or from the bottom of the housing. In cabinets MSP6 made of heat-hardening polyester cable glands may be installed also on side-walls according to users requirements. Outdoor cabinets IP66 have a special feedthrough for pressure compensation installed, which prevents water vapour condensation. Application All cabinets MSP6 and MST6 are dedicated to indoor use (cat. C according to PN-EN 61753-1). Special versions MSPz6 and MSTz6, IP66 with pressure control feedthrough are dedicated for outdoor use, cat. G according to PN-EN 61753-1. Example of order MSP6/96SC 4/S24 YYY Outdoor distribution cabinet, IP66, four cable glands, sliding support with modules PS-010 of capacity 96 adapters SC-E2 standard, four organiser trays KSP12/S24 for 96 splices, self-sticking labels for fibres and cables OSN 96, screws for wall mounting. Marking Technical data Option Housing material Dimensions, mm W x H x D Weigth, kg MSP 6/X polyester 400x600x230 12 MST6/X painted steel 400x600x250 19 Number od optical ports *, max Number of trays KSP12 / Number of splices, max 96/144SF/144LC 6/144 (*) number of optical ports in distribution cabinets with application of: standard connectors and adapters 2,5mm, plugs SC-E2 with adapters small flange (SF) and plugs. LC-MU with adapters duplex (LC) 43
1. Base and cover on hinges - 1 kit 2. Trays lifting support set - 1 kit 3. Organiser trays KSP12 - max 6 kits 4. User s distribution box set - 1 kit 5. Modues for adapters installation max 12 kits 6. Box splitters PLC with connectors max 2 kit 7. Cable glands with cable grip - 4 kit 8. Cable bundles grip CHD - 4 pcs. 9. Padlock - 1 kit 44
MSP 6FTTH/X MST 6FTTH/X Distribution cabinets dedicated for FTTH networks. Cabinets are equipped with organiser tray s KSP12 lifting module (max 6 on 144 on splices), sliding distribution module (max 96 adapters standard or 144 SC-E2000 Small Flange) and splitters distribution module enabling installaion of two box splitters with pigtails terminated with optical connecotrs (64 ports SC-E2 or 128 LC-MU Duplex). Splitter output ports may be easily and quickly crossed with any portsi of distribution box by means of short patchcords, without need of interference in splitters cabling. Input splitters ports may be joined to fiber optic line in organiser tray by fixed fused or mechanical splices or in a separable way (not fixed) in distribution box. Cabinets may incorporate cable glands from above or from the bottom of the housing. In cabinets MSP6 made of heat-hardening polyester cable glands may be installed also on side-walls according to users requirements. Outdoor cabinets IP66 have a special pressure control feedthrough, preventing from water vapour condensation. Application All cabinets MSP6 and MST6 are dedicated for indoor use (cat. C according to PN-EN 61753-1). Versions MSP6z and MST6z, IP66 with pressure control feedthrough are dedicated for ourdoor use (cat. G according to PN-EN 61753-1). Marking Example of order MSP6FTTH/64SC 3/S24/1/F6-YYY Outdoor distribution cabinet IP66, 64-ports SC-E2 splitters distribution box, user s distribution box minimum 72 ports SC-E2, three organiser trays KSP12/S24 and one organiser tray KSP12/F6, four cable glands, self-sticking labels for fibres and cables OSN 72, screws for wall mounting. Technical data Option Housing material Dimensions, mm W x H x D Weigth, kg Number of user s optical ports*, max Number of optical splitters*, max MSP 6FTTH /X polyester 400x600x230 13 64/64SF/128LC 96/144SF/144LC MST 6 FTTH /X painted steel 400x600x250 20 64/64SF/128LC (*) number of optical ports in distribution boxes, with application of: connectors and adapters 2,5mm, plugs SC-E2 with adapters small flange (SF) and plugs LC-MU with adapters duplex (LC) Number of organise trays KSP12/ Number of splices, max 6/144 45
1. Base an cover with hinges - 1 kit 2. Trays lifting support set - 1 kit 3. Kasety spojeń KSP12 - max 6 kits 4. User s distribution box set - 1 kit 5. Module PS-010 for installation of adapters in user s distribution box max 12 kits 6. Distribution splitters support - 1 kit 7. Panels for installation of adapters in splitters distribution box max 4 kits 8. Box splitters PLC with connectors max 2 kits 9. Cable glands with cable grip - 4 kits 10. Cable bundles grips CHD - 4 pcs. 11. Padlock - 1 kit 46