Valve Packs & Customs

Index Valve Packs & Customs Priority Flow Controls - Hammer Valve Series... 0.0.0 Selector Valves: Three, Six & Eight-Way... 0.0.0 Two-Speed Line Mount and Sandwich Valves... 0.03.0 Two-Speed Sandwich Module P/N System... 0.03.0 Two-Speed Line Mount Module P/N System... 0.03.03 Request for Engineered Project -... 0.04.0 Request for Engineered Project -... 0.04.0 SUB SUB PACKS www.lynch.ca Phone: + (905) 363-400 Fax: + (905) 363-9 799 Argentia Road Mississauga, Ontario L5N 3A Canada 45

0.0.0 0/00.B Priority Flow Controls - Hammer Valve Series SUB SUB PART NUMBER SYSTEM MATERIAL MODEL CIRCUIT Dual 65 GPM w/ High Flow Needle, 4500PSI & 4Vdc Coil w/ Connector: HVD065AWHIN4B PRESSURE FLOW CONTROL SEALS VOLTAGE CONNECTOR PACKS HV 05 05 035 035 D Hammer Valve Ductile Iron DESCRIPTION Single Pump Inlet Max 5 GPM Dual Pump Inlet Max 5 GPM Each Single Pump Inlet Max 35 GPM Dual Pump Inlet Max 35 GPM Each 065 065 30 30 A0 A Std W/ No CF Bleed Std W/ Manual CF Bleed DESCRIPTION Single Pump Inlet Max 65 GPM Dual Pump Inlet Max 65 GPM Each Single Pump Inlet Max 30 GPM Dual Pump Inlet Max 30 GPM Each W C A FLOW CONTROL L_* Needle w/ Standard Screw Adj H_* Needle w/ Calibrated Handknob VO** 6 Position Detented Knob * Code varies with Model - Contact Factory ** Available on certain Models - Contact Factory PRESSURE 500 to 4500 PSI 500 to 6000 PSI 500 to 3000 PSI N V Buna Viton 4 Code B D VOLTAGE 0 Vac 4 Vdc Vdc CONNECTOR Coil Only No Connector Coil with Std Connector (PG) Coil with Connector Connector w/ LED (PG) 46 www.lynch.ca Phone: + (905) 363-400 Fax: + (905) 363-9 799 Argentia Road Mississauga, Ontario L5N 3A Canada

Selector Valves: Three, Six & Eight-Way 0.0.0 /00.B /00.A SUB SUB REQUEST BY MODEL NUMBER BASIC MODEL NUMBER NOMINAL FLOW RATE 3-WAY SELECTOR with 6-WAY SELECTOR with 3-WAY SELECTOR 6-WAY SELECTOR RELIEF & ANTI-CAV RELIEF & ANTI-CAV 8-WAY SELECTOR 5 GPM 3WP*A 3WP*B 6WP*A 6WP*B 8WP*A 30 GPM 3WP*A 3WP*B 6WP*A 6WP*B 8WP*A 60 GPM 3WP*3A 3WP*3B 6WP*3A 6WP*3B 8WP*3A 0 GPM 3WP*4A 3WP*4B 6WP*4A 6WP*4B 8WP*4A 40 GPM Contact Factory Contact Factory Contact Factory Contact Factory Contact Factory * = "A" for Aluminum Manifold or "D" for Ductile Iron Manifold PACKS www.lynch.ca Phone: + (905) 363-400 Fax: + (905) 363-9 799 Argentia Road Mississauga, Ontario L5N 3A Canada 47

0.03.0 0/00.A Two-Speed Line Mount and Sandwich Valves Rapid Advance And Feed Valves (RM & RL Series) Compact Solutions For Two-Speed Applications SUB SUB D03 Sandwich module. Meter in P with Needle Valve D03, D05, D07 & D08 Sandwich Modules (RM) Circuits available: Meter In P Meter Out A Meter In A Meter Out B Meter In B Meter Out T and Line Mounted Bodies (RL) Porting available: SAE BSPP Metric NPT BSPT SAE Flange Available in aluminum or ductile iron PACKS Normally open or closed solenoid options. Coil voltages from VDC to 30 VAC. Flow control options include needle All valves are available with settings. Seals are Buna N or Viton. Inline Model with SAE 6 Ports and Pressure Compensated Flow Control. 48 www.lynch.ca Phone: + (905) 363-400 Fax: + (905) 363-9 799 Argentia Road Mississauga, Ontario L5N 3A Canada

Two-Speed Sandwich Module P/N System 0.03.0 0/00.A EXAMPLE : MATERIAL Speed in Aluminum with D03 Module M/I P or M/O T, GPM Normally Closed Spool Solenoid with 4 Vdc Coil and Lighted Connector and NFCC LCN Needle INTERFACE CIRCUIT, (* = CONTROL) & FLOW CONTROL SEAL COMPOUND REST CONDITION RMA03GEPLCN4D VOLTAGE CONNECTOR RM 03G NOTES: Speed (RAF) Sandwich Module A D INTER- FACE NFPA DO3 "NG6" NFPA 05T DO5 "NG0" NFPA 07G DO7 "NG6" NFPA 08G DO8 "NG5" Aluminum Ductile Iron FUNCTION M/I P or M/O T M/I or M/O A or B M/I P M/O T M/O A M/O B M/I A M/I B M/I P M/O T M/O A M/O B M/I A M/I B M/I = METER IN M/O = METER OUT Solenoid Performance varies - Contact Factory regarding your application SOLENOID DIRECT ACTING SPOOL DIRECT ACTING POPPET DIRECT ACTING SPOOL DIRECT ACTING POPPET M/I P M/O T M/O A or M/I B M/O B or M/I A D A SPOOL VOLTAGE SOLENOID 0 Vac ADJUSTMENT C Normally Closed (slow) Vdc L Standard Screw H Normally Open(fast) 4 4 Vdc K Hand-Knob 3 30 Vac H Calibbrated Hand-Knob N Buna V Viton Code CONNECTOR W/ NO CONNECTOR CIRCUIT / CONTROL / FLOW A Std. Connector (PG9) Select one of the corresponding codes B Std. Connector (PG) Select One inserting Control Option Code C w/ LED+VDR (PG9) From Below where the * is shown D w/ LED & VDR (PG) FLOW GPM Max / Nom / 5 / 5 5 + / 5 / 5 5 + 30 + 60 + 60 + D A POPPET STACK HEIGHT.75".5" 3.5" 3.5" 4.5" 3.5" P O POPPET Solenoid Schematics * Normally Closed valves shown for reference Solenoid & Needle With FF Check AA * C BA * C CA * C CA * C CB * C 3DA * C 3DB * C 3DC * C 3DD * C 3DA * C 3DB * C 3DC * C 3DD * C 0-0.9" orifice 0-0.5" orifice 0-0.38" orifice 0-0.38" orifice Solenoid & Needle EP * C FP * C GP * C EA * C FA * C GA * C GP * A GT * A GA * A GB * A 3GP * E 3GT * E 3HA * E 3HB * E 3HC * E 3HD * E 3GP * E 3GT * E 3HA * E 3HB * E 3HC * E 3HD * E CONSULT FACTORY 0-0.9" orifice 0-0.5" orifice 0-0.38" orifice 0-0.38" orifice Solenoid & PC Flow Control NP * A OP * A PP * A NA * A OA * A PA * A PP * A PT * A PA * A PB * A 3PP * A 3PT * A 3QA * A 3QB * A 3QC * A 3QD * A 3PP * A 3PT * A 3QA * A 3QB * A 3QC * A 3QD* A FOR NEW PART NUMBERS 0. - 6 GPM 0 - GPM 0-5 GPM 0-5 GPM SUB SUB ELECTRONICS PACKS WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION Lynch Products Can Be Modified to Suit Your Application Phone: (888) 66-4365 or + (905) 363-400 Fax: (800) 63-5807 or + (905) 363-9 www.lynch.ca 49

0.03.03 /0.B Two-Speed Line Mounted Module P/N System EXAMPLE : MATERIAL Speed in Aluminum with SAE 6 ports, 60 GPM Normally Closed Poppet Solenoid with 0 Vac Coil and Lighted Connector and NFEC KEN Needle RLASH3H3KENCD PORT CIRCUIT, (* = CONTROL) & FLOW CONTROL SEAL COMPOUND REST CONDITION VOLTAGE CONNECTOR SUB RL VOLTAGE Speed 0 Vac Line SOLENOID Vdc mounted C Normally Closed (slow) 4 4 Vdc Assembly H Normally Open(fast) 3 30 Vac ADJUSTMENT L Standard Screw A Aluminum K Hand-Knob N Buna D Ductile Iron H Calibbrated Hand-Knob V Viton Code CONNECTOR Only (No Connector) A Std. Connector (PG9) CIRCUIT / CONTROL / FLOW B Std. Connector (PG) Select one of the corresponding codes C w/ LED+VDR (PG9) Select One inserting Control Option Code D w/ LED+VDR (PG) From Below where the * is shown SUB ELECTRONICS PACKS NB NC SB SC SD BB BC ND NF SD SE SF BD BF NF NH NI SF SH SI BF BH BI H I H I /4" NPTF 3/8" NPTF SAE -4 SAE -6 SAE -8 /4" BSPP 3/8" BSPP /" NPTF 3/4" NPTF SAE -8 SAE -0 SAE - /" BSPP 3/4"BSPP 3/4" NPTF " NPTF /4" NPTF SAE - SAE -6 SAE -0 3/4" BSPP " BSPP /4" BSPP " 6 /4" 6 " 6 /4" 6 Solenoid Type Solenoid Flow Ratings for Above Circuits (MAX / Nom) Circuit **** Circuit **** Circuit 3**** NEEDLE with 30 PSI REVERSE FREE FLOW A3*C B3*C D3*C D3*C 3D3*C 0-0.9" orifice 0-0.5" orifice Spool Poppet Poppet Spool / 5 / 5 5 + / 5 na na 30 + na na na 60 + na NEEDLE ONLY E3*C F3*C H3*C H3*A CONSULT FACTORY 0-0.38" orifice 3H3*E Poppet Poppet / 5 5 + na 30 + na 60 + P.C. FLOW CONTROL & CHECK N3*A O3*A Q3*A FOR NEW PART NUMBERS 0-0.9" orifice 0-0.5" orifice 0-0.38" orifice Q3*A 3Q3*A Spool Poppet Poppet / 5 / 5 5 + na na 30 + na na 60 + 0-6 GPM 0 - GPM 0-5 GPM WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION 50 Lynch Products Can Be Modified to Suit Your Application Phone: (888) 66-4365 or + (905) 363-400 Fax: (800) 63-5807 or + (905) 363-9 www.lynch.ca

0.04.0 /00.B Request For Engineered Project - Company: Address: Phone: Fax No: E-mail: Contact: Reference Number: Project Status: Final and Production Ready Ready for Proto-Types Preliminary Quantities: per Order per Month per Year Other Delivery: Proto-Types First Release Production Price Range: Drawing or Schematic Available: System Specification Design Flows: Max Pump Flow Max System Flow System Pressure: Duty Cycle Working Pressure Peak Pressure Fluids: Type Temperature Seals Coil Type: VDC 4 VDC 0 VAC 0 VAC TERMINATION LEADS OTHER Restrictions: Overall Limits W x H x L Block Size W x H x L Other Please provide a brief description of the application and the system requirements: APPLICATION NOTES YES, See attached DWG No: NO, See Information Below Aluminum Other Material: Aluminum 606-T6 Ductile Iron 65-45- Steel - Grade Stainless Steel - Grade Other Finish: NONE Anodizing - Clear Anodizing - Hard Coat Anodizing - Color Black Oxide Electroless Nickel Plating Other To Standard Specification Valving: NONE - Block Only Required As per B.O.M. Supplied Free issued and Installed by Lynch At Lynch's discretion meeting specification Substitutions to B.O.M. OKAY Other Porting: SAE (ISO 96-) NPTF (SAE J476) BSPP (ISO 79-) Metric (ISO 679) Mounting: Tapped Mounting Holes - # & Where Lynch Bar Manifold Bracket Type Most Economical Through Mounting Holes - # & Where UNC Other - Specify Metric Other (please specify standard below) SUB SUB PACKS www.lynch.ca Phone: + (905) 363-400 Fax: + (905) 363-9 799 Argentia Road Mississauga, Ontario L5N 3A Canada 5

0.04.0 0/00.A Request for Engineered Project - Please provide as much as possible of the following information below where critical: Bill of Material PACKS SUB SUB 5 www.lynch.ca Phone: + (905) 363-400 Fax: + (905) 363-9 799 Argentia Road Mississauga, Ontario L5N 3A Canada