Company Information () is a Calgary based oil and gas products supplier focused on thermal recovery of hydrocarbons. has a global network of qualified suppliers to deliver solutions to customers for use their thermal applications. This would clude but is not limited to: vacuum sulated tubg and casg (VIT, VIC), high thermal efficiency tubg and casg (HTET, HTEC), ultra high strength sucker and polish rods, PCP application rods, portable steam generators and sand control screens. Through its global network, can also offer analysis of a particular sand control situation and offer competitive solutions based on this analysis. Sand Control Screen Utilizg Bridgg Aperture Technology The Bridgg Apertured Screen is comprised of a perforated concentric base pipe with layers of filter jacket material encased a side-punched apertures screen shroud, all attached to the base pipe with a supportg rg. The base pipe has a predetermed number of perforated holes. The outer shroud with grooved or arc bridges is one unit connected through the supportg rg to the concentric base pipe. The rg is attached to the base pipe with socket head cap screws, and the assembly is then welded to the base pipe to help prevent corrosion and potential shearg off at the weldg pot. The BAS is an excellent choice for those well environments with high concentrations of H2S, CO2 and CL. If 13Cr or other high alloy content base pipe is utilised, the system of both set screw and surface weldg ensures a higher strength at the weldg pot between base pipe and filter screen media. Advantages the advanced novative technology corporated the design provides a larger flow area compared with Slotted Screen, Punched Screen or Wire Wrapped Screen higher anti-pluggg and erosion-endurance capability compared to Slotted Screen and Punched Screen creased resistance to deformation and longer service life the punched aperture structures result a side flow path, and therefore protects the perforated base pipe from direct fluid erosion the combation of set screw connection along with surface weldg of the supportg rgs to the base pipe, helps protect the base pipe from damage the filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions very resistant to extrusion deformation due to connection to the base pipe beg side the filter jacket; will prevent aperture from becomg enlarged the large open area of the screen provides a larger flow area with lower flow resistance, which assists with the anti-pluggg capability and creased oil/gas recovery the 90 aperture on both sides of the grooved bridge or arc bridge of the filter jacket helps to reduce possibility of pluggg
Bridgg Apertured Screen 1. the side-punched apertured filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions 2. the 90 degree apertures on both sides of the grooved or arced bridge ensure high resistance to pluggg 3. the filter jacket is secured to the base pipe with a combation of set screws along with surface weldg 4. high density aperture, low flow restriction and large base pipe flow area is over 10 times higher than competitor products 5. easy field handg and RIH capability Technical Parameters Size OD ID Hole Density Basepipe Hole Dia. 2 7/8 3 1/2 4 73.03 88.9 101.6 114.3 3.149 3.779 4.291 4.763 5.275 5.787 6.889 7.283 79.98 95.99 108.99 120.98 133.99 146.99 174.98 184.99 2.441 2.992 3.548 3.958 4.408 4.892 5.921 6.276 62 76 90.12 100.53 111.96 124.26 150.39 159.41 66 66 88 110 121 holes/ft 4 1/2 99 0.4 10.16 Length 5 5 1/2 6 5/8 7 127 139.7 168.28 177.8 132 143 Based on API Tubg and Casg standard or clients' requirements Email: sales@cthermal.ca Web:www.cthermal.ca
Company Information () is a Calgary based oil and gas products supplier focused on thermal recovery of hydrocarbons. has a global network of qualified suppliers to deliver solutions to customers for use their thermal applications. This would clude but is not limited to: vacuum sulated tubg and casg (VIT, VIC), high thermal efficiency tubg and casg (HTET, HTEC), ultra high strength sucker and polish rods, PCP application rods, portable steam generators and sand control screens. Through its global network, can also offer analysis of a particular sand control situation and offer competitive solutions based on this analysis. Sand Control Screen Utilizg Bridgg Aperture Technology The Bridgg Apertured Screen is comprised of a perforated concentric base pipe with layers of filter jacket material encased a side-punched apertures screen shroud, all attached to the base pipe with a supportg rg. The base pipe has a predetermed number of perforated holes. The outer shroud with grooved or arc bridges is one unit connected through the supportg rg to the concentric base pipe. The rg is attached to the base pipe with socket head cap screws, and the assembly is then welded to the base pipe to help prevent corrosion and potential shearg off at the weldg pot. The BAS is an excellent choice for those well environments with high concentrations of H2S, CO2 and CL. If 13Cr or other high alloy content base pipe is utilised, the system of both set screw and surface weldg ensures a higher strength at the weldg pot between base pipe and filter screen media. Advantages the advanced novative technology corporated the design provides a larger flow area compared with Slotted Screen, Punched Screen or Wire Wrapped Screen higher anti-pluggg and erosion-endurance capability compared to Slotted Screen and Punched Screen creased resistance to deformation and longer service life the punched aperture structures result a side flow path, and therefore protects the perforated base pipe from direct fluid erosion the combation of set screw connection along with surface weldg of the supportg rgs to the base pipe, helps protect the base pipe from damage the filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions very resistant to extrusion deformation due to connection to the base pipe beg side the filter jacket; will prevent aperture from becomg enlarged the large open area of the screen provides a larger flow area with lower flow resistance, which assists with the anti-pluggg capability and creased oil/gas recovery the 90 aperture on both sides of the grooved bridge or arc bridge of the filter jacket helps to reduce possibility of pluggg
Bridgg Composite Screen 1. the side-punched apertured filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions 2. the 90 degree apertures on both sides of the grooved or arced bridge reduce the possibility of pluggg 3. the filter jacket is secured to the base pipe with a combation of set screws along with surface weldg 4. the large flow area reduces the possibility of pluggg 5. the annulus between the filter jacket and the base pipe ensures high permeability of the full screen jot 6. the multiple layers of filter mesh are free to move an expansion or contraction mode; they are not subject to torque which may be experienced by the assembly durg stallation 7. easy field handg and RIH capability Technical Parameters Size 2 7/8 3 1/2 4 4 1/2 5 5 1/2 6 5/8 7 73.03 88.9 101.6 114.3 127 139.7 168.28 177.8 OD 3.642 4.272 4.764 5.276 5.768 6.28 7.402 7.776 92.51 108.51 121.01 134.01 146.51 159.51 188.01 197.51 ID 2.441 2.992 3.548 3.958 4.408 4.892 5.921 6.276 62 76 90.12 100.53 111.96 124.26 150.39 159.41 Hole Density holes/ft 66 66 88 99 110 121 132 143 Basepipe Hole Dia. 0.4 10.16 Length Based on API Tubg and Casg standard or clients' requirements
Company Information () is a Calgary based oil and gas products supplier focused on thermal recovery of hydrocarbons. has a global network of qualified suppliers to deliver solutions to customers for use their thermal applications. This would clude but is not limited to: vacuum sulated tubg and casg (VIT, VIC), high thermal efficiency tubg and casg (HTET, HTEC), ultra high strength sucker and polish rods, PCP application rods, portable steam generators and sand control screens. Through its global network, can also offer analysis of a particular sand control situation and offer competitive solutions based on this analysis. Sand Control Screen Utilizg Bridgg Aperture Technology The Bridgg Apertured Screen is comprised of a perforated concentric base pipe with layers of filter jacket material encased a side-punched apertures screen shroud, all attached to the base pipe with a supportg rg. The base pipe has a predetermed number of perforated holes. The outer shroud with grooved or arc bridges is one unit connected through the supportg rg to the concentric base pipe. The rg is attached to the base pipe with socket head cap screws, and the assembly is then welded to the base pipe to help prevent corrosion and potential shearg off at the weldg pot. The BAS is an excellent choice for those well environments with high concentrations of H2S, CO2 and CL. If 13Cr or other high alloy content base pipe is utilised, the system of both set screw and surface weldg ensures a higher strength at the weldg pot between base pipe and filter screen media. Advantages the advanced novative technology corporated the design provides a larger flow area compared with Slotted Screen, Punched Screen or Wire Wrapped Screen higher anti-pluggg and erosion-endurance capability compared to Slotted Screen and Punched Screen creased resistance to deformation and longer service life the punched aperture structures result a side flow path, and therefore protects the perforated base pipe from direct fluid erosion the combation of set screw connection along with surface weldg of the supportg rgs to the base pipe, helps protect the base pipe from damage the filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions very resistant to extrusion deformation due to connection to the base pipe beg side the filter jacket; will prevent aperture from becomg enlarged the large open area of the screen provides a larger flow area with lower flow resistance, which assists with the anti-pluggg capability and creased oil/gas recovery the 90 aperture on both sides of the grooved bridge or arc bridge of the filter jacket helps to reduce possibility of pluggg
Bridgg Composite 2008 Screen 1. the side-punched apertured filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions 2. the 90 degree apertures on both sides of the grooved or arced bridge reduce the possibility of pluggg 3. the filter jacket is secured to the base pipe with a combation of set screws along with surface weldg 4. the bridgg structured ner shroud enhances flow draage by divertg the flow path; which prevents sand accumulation and screen pluggg 5. the multiple layers of filter mesh are free to move an expansion or contraction mode; they are not subject to torque which may be experienced by the assembly durg stallation 6. easy field handg and RIH capability Technical Parameters Size 2 7/8 3 1/2 4 4 1/2 5 5 1/2 6 5/8 7 73.03 88.9 101.6 114.3 127 139.7 168.28 177.8 OD 3.839 4.429 4.941 5.375 5.909 6.398 7.58 7.933 97.51 112.5 125.5 136.53 150.09 162.51 192.53 201.5 ID 2.441 2.992 3.548 3.958 4.408 4.892 5.921 6.276 62 76 90.12 100.53 111.96 124.26 150.39 159.41 Hole Density holes/ft 66 66 88 99 110 121 132 143 Basepipe Hole Dia. 0.4 10.16 Length Based on API Tubg and Casg standard or clients' requirements