Not for New Designs www.vishay.com Filter Inductors, Toroid, Radial Leaded Note () Inverse of typical temperature coefficient of polystyrene capacitor. FEATURES STANDARD ELECTRICAL SPECIFICATIONS (applies to core only) TE-3 TD-3 MODEL TE-4 TD-4 TE-5 TD-5 TC TEMPERATURE COEFFICIENT Choice of encapsulated (TE) or dipped (TD) styles TD style combines low cost with excellent performance in commercial applications igh Q and wide selection of Q vs. frequency ranges in one small package. Large number of standard inductance values Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 TEMPERATURE RANGE ELECTRICAL SPECIFICATIONS Tolerance: TE-3, TD-3 = ± % > 2, ± 2 % 54 μ to 2, ± 5 % < 50 μ TE-4, TD-4 = ± % > 2, ± 2 % < 2 TE-5, TD-5 = ± % > 2, ± 2 % < 2 Insulation resistance: 0 M minimum Dielectric strength: 0 V minimum (TE) 500 V minimum (TD) MECANICAL SPECIFICATIONS Terminal strength: 2 pounds pull test (TE) Vibration: per MIL-T-27 (TE) Shock: per MIL-T-27 (TE) Weight: TE-3 = 5. g, TD-3 = 4.9 g typical TE-4 = 20 g, TD-4 = 7 g typical TE-5 = 53 g, TD-5 = 52 g typical TC AVAILABILITY X X X TA 0 % ± % -55 C to +25 C X X X X X TD 0 % ± 0. % 0 C to +55 C X X X X X TL () +40 ppm/ C to + ppm/ C +85 ppm/ C to + 85 ppm/ C -55 C to +25 C +25 C to +85 C X X X TM 0 ± 0.25 % -65 C to +25 C X X X X X TR 50 ppm/ C (typical) -65 C to +25 C X X X X TW 0 % ± 0.25 % -55 C to +85 C X X INDUCTANCE RANGE TC TE-3 TD-3 TE-4 TD-4 TE-5 TD-5 50 μ to 5 50 μ to 20 to 500 μ to 487 to 2 5 to 2 to 2 to 5 to 5 DIMENSIONS in inches [millimeters] TE TD A Dia. B F Dia. E D C Min. G A Dia. B C Min. F Min. Dia. 0.375 ± 0.25 [9.53 ± 3.8] X MODEL A B C D E F G TE-3 TD-3 TE-4 TD-4 TE-5 TD-5 0.685 [7.40] 0.685 [7.40].06 [26.92].06 [26.92].33 [33.78].32 [33.53] 0.385 [9.78] 0.320 [8.3] 0.500 [2.70] 0.437 [.] 0.735 [8.67] 0.688 [7.48].0 3.0 [76.20].0 4.0 [.60].0 6.0 [52.40] 0.025 [0.635] 0.500 [2.70] - - 0.032 [0.83] 0.900 [22.86] - - 0.032 [0.83].0 - - 0.093 [2.36] 0.25 [3.8] 0.20 [3.05] 0.220 [5.59] 0.44 [3.66] 0.220 [5.59] 0.250 [6.35] - 0.450 [.43] - 0.500 [2.70] - MATERIAL SPECIFICATIONS Coating: vinyl (TD), non-flammable, abrasion and moisture resistant. Resists most cleaning agents (consult factory for chemicals which may be used) Standard terminals: tinned copper (TE), stranded, tinned copper, teflon insulated (TD) Encapsulant: epoxy (TE) Gauge: TE-3 = 22 AWG, TD-3 = 26 AWG TE-4 = 20 AWG, TD-4 = 24 AWG TE-5 = 20 AWG, TD-5 = 24 AWG Revison: 08-Aug-6 Document Number: 34078 TIS DOCUMENT IS SUBJECT TO CANGE WITOUT NOTICE. TE PRODUCTS DESCRIBED EREIN AND TIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORT AT www.vishay.com/doc?90
Not for New Designs ORDERING INFORMATION TE-3 TR 5 ± % EB e2 MODEL Q TC INDUCTANCE INDUCTANCE PACKAGE JEDEC LEAD (Pb)-FREE TYPE VALUE TOLERANCE STANDARD GLOBAL PART NUMBER T E 3 Q 0 T R E B 5 0 0 F MODEL Q TYPE TC PACKAGE INDUCTANCE VALUE TOL. RESISTANCE AND SELF-RESONANT FREQUENCIES (typical values) MODEL IND. R ( ) SRF (Mz) (μ) TE-3, TD-3 50.0 0.68 - - 7.6 - - TE-3, TD-3.0.0 - - 5. - - TE-3, TD-3 332.0 3.3 - - 2.9 - - TE-3, TD-3 0.0 6.9.5 0.82.4..0 TE-3, TD-3 3320 24.0 4. 2.3 0.79 0.57 0.55 TE-3, TD-3 000 84.0 4.0 5.9 0.40 0.29 0.25 TE-3, TD-3 5 000 6.0 7.0 9. 0.34 0.24 0.2 TE-3, TD-3 33 200-40.0 8.0-0.4 0.2 TE-3, TD-3 000-38.0 58.0-0.08 0.077 TE-3, TD-3 332 000-555.0 220.0-0.04 0.038 TE-3, TD-3 000 000 - - 670.0 - - 0.09 TE-4, TD-4 50.0 0.54 - - 2.6 - - TE-4, TD-4 0 2.8 0.7 -.0 0.75 - TE-4, TD-4 2000 5.5.4 0.78 0.64 0.54 0.45 TE-4, TD-4 000 27.0 4.9 2.5 0.24 0.2 0.8 TE-4, TD-4 20 000 54.0 9.6 5.0 0.8 0.5 0.3 TE-4, TD-4 000-56.0 23.0-0.059 0.05 TE-4, TD-4 000 000-570.0 260.0-0.06 0.04 TE-4, TD-4 2 000 000-200.0 520.0-0.03 0.0 TE-5, TD-5 0.8 - - 0.80 - - TE-5, TD-5 3320 5.2 - - 0.44 - - TE-5, TD-5 5000 6.5.8-0.33 0.32 - TE-5, TD-5 000 3.0 2.4.7 0.2 0.20 0.5 TE-5, TD-5 33 200 49.0 8.8 3.9 0.2 0. 0.086 TE-5, TD-5 000 33.0 27.0.0 0.06 0.057 0.044 TE-5, TD-5 332 000-80.0 44.0-0.032 0.024 TE-5, TD-5 000 000-222.0 2.0-0.06 0.02 TE-5, TD-5 2 000 000-475.0 27.0-0.02 0.008 STANDARD INDUCTANCE VALUE The following standardization chart is offered for your design and ordering convenience. Each value listed is within one percent of the preceding and succeeding values shown. All decade multiples of these values, within the range shown for each model in the chart, are standard values. (Example: for a TE-3, 200 μ, 20 and 200 are all decade multiples of 2.00 and are all standard values.).00.2.47.78 2.5 2.6 3.09 3.74 4.42 5.23 6.9 7.32 8.66.02.24.50.82 2.2 2.67 3.6 3.83 4.53 5.36 6.34 7.50 8.87.05.27.54.87 2.26 2.74 3.24 3.92 4.64 5.49 6.49 7.68 9.00.07.30.58.9 2.32 2.80 3.32 4.00 4.75 5.62 6.65 7.87 9.09..33.62.96 2.37 2.87 3.40 4.02 4.87 5.76 6.8 8.00 9.3.3.37.65 2.00 2.43 2.94 3.48 4.2 4.99 5.90 6.98 8.06 9.53.5.40.69 2.05 2.49 3.00 3.57 4.22 5.00 6.00 7.00 8.25 9.76.8.43.74 2. 2.55 3.0 3.65 4.32 5. 6.04 7.5 8.45 Revison: 08-Aug-6 2 Document Number: 34078 TIS DOCUMENT IS SUBJECT TO CANGE WITOUT NOTICE. TE PRODUCTS DESCRIBED EREIN AND TIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORT AT www.vishay.com/doc?90
Not for New Designs www.vishay.com PERFORMANCE GRAPS: INDUCTANCE VS. BIAS, INDUCTANCE VS. AC EXCITATION TE-3, TD-3 % I N D U C T A N C E C A N G E 0-5 - - 5-20 AC - 25 0 000 INDUCTOR CURRENT IN ma x INDUCTANCE IN TE-4, TD-4 0 E N G - 5 E C A - % I N D U C T A N C - 5-20 AC - 25 0 000 INDUCTOR CURRENT IN ma x INDUCTANCE IN TE-5, TD-5 0 N G E - 5 A % I N D U C T A N C E C - - 5-20 AC - 25 0 000 INDUCTOR CURRENT IN ma x INDUCTANCE IN Revison: 08-Aug-6 3 Document Number: 34078 TIS DOCUMENT IS SUBJECT TO CANGE WITOUT NOTICE. TE PRODUCTS DESCRIBED EREIN AND TIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORT AT www.vishay.com/doc?90
Not for New Designs PERFORMANCE GRAPS: TYPICAL Q VS. FREQUENCY TE-3, TD-3 TE-4, TD-4 0 0 Q 5 3.3 330 µ 50 µ Q 20 3.3 50 µ 0 000 0 000 0 0 Q 0 0 0 Q 2 0 7.5 0. Revison: 08-Aug-6 4 Document Number: 34078 TIS DOCUMENT IS SUBJECT TO CANGE WITOUT NOTICE. TE PRODUCTS DESCRIBED EREIN AND TIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORT AT www.vishay.com/doc?90
Not for New Designs PERFORMANCE GRAPS: TYPICAL Q VS. FREQUENCY TE-5, TD-5 0 0 5 0 2 330 0. 0 20 0. MARKING - - Model - Q type - TC code - Inductance value - Inductance tolerance - Date code Revison: 08-Aug-6 5 Document Number: 34078 TIS DOCUMENT IS SUBJECT TO CANGE WITOUT NOTICE. TE PRODUCTS DESCRIBED EREIN AND TIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORT AT www.vishay.com/doc?90
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CANGE WITOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 90