433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI LIN-433 LinTronic InfraRed RadioFrequency Computer Interface The LIN-433 is a Signal Converter holding: - low-power output and high-power front booster - RS232 comport - 433.92 Mhz radio receiver/transmitter - digital input - heavy duty relay LIN-433 is based on the popular TT455-RT-238. Revised: 141228
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI SemiTransparent DarkRed plastic enclosure, compact design ( W:120 x H:65 x D:40 mm ) - Plastic is infrared transparent and RF transparent offering long range - When inserted into a cabinet, or left close to other products, the cabinet appears dark/black 2-way LongRange RadioFrequency Receiver and Transmitter (433.92 Mhz) - Can work with a wide range of remote controls, motion detectors, light dimmers, relays, doorbells and much more - Can send/recieve more than 270.000.000.000.000 codes - Range approximately 150-200 meters, plus an automatic repeater function bosting range from box to box HighPower DualBand LongRange InfraRed Booster (32-56 Khz) - Supports products from the LinTronic Database (more than 80.000 commands) 2-way RS232 communication comport (2.400-38.400 bps) - Controls projectors, light systems, computer, amx, crestron, etc. - RS232 commands can be transmitted by radio signals across the house Front 1 pcs digital input can be triggered by external contact 1 pcs heavy-duty relay output (5 amps) Cooperates with TT455-R-238 and RELAY 208 - Allows you to control audio/video products, curtains, tv s, projectors etc. across the house.
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI TRIGGERS ACTIONS The LIN-433 can be triggered by: - infrared remote controls - B&O remote control (extra receiver required) - 433.92 Mhz signals from: - RF remote controls - motion and door/windows triggers - X10 remote controls and panels - Digtal input triggerede by: - cameras, relays, switches, buttons - RS232 from computers and controllers - and much more The LIN-433 can control: audio/video products, like: amplifiers, cd, dvd, mediacenters tvs, projectors, screens computers, controllers, HomeAutomation software relays, motors and much more Triggers Actions
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI X10 panels The 433 can be controlled by and control a large range of RF products working on 433.92 Mhz. Lights Relays Relay RS-232 X10 motion detector remote controls motion detectors, door bells, remote controls, alarms, etc.
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface RF BOARD MotherBoard connector Power stabilizer Two radiowave modules Optimized onboard antenna 433 MHz 1 2 3 J2 1 2 3 1 2 3 EUROPE: Transmission power 10 mw USA: Transmission power 1 mw (default setting)
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface MOTHERBOARD RF indikator Blinks when detecting RF or background noise. Heartbeat LED High-Power front Confirmation LED 36-40 KHz receiver MicroController HeartBeat Blinks every seconds when program is running. Program must be running not later than 5 seconds after power is applied. Relay in Relay out Ground Digital input low-power output input RS232 Power (12 volt)
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface FRONT LOOK REAR LOOK Integrated RF antenna Confimation LED 36-40 KHz Rx POWER B&O INPUT BOOSTER RS232 OUT RELAY
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface Power supply Confirmation LED 1.5V 12V 100-240 vac 5 0 / 6 0 H z PowerAdap-003 / 004 12 volt - + 2.1 mm When power is applied, the character ^ is transmitted on the comport right away, to indicate to the computer that the product is asking for new firmware. The product will wait for 3 seconds. During these 3 seconds the front LED will flash. If no correct answer is received from the computer then the product will send out: <0001010082> You can check that this happens in the DataSampler of the Configurator. Also the confirmation LED will blink when receiving a Trigger or carrying out an Action.
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface RS232 interface Jack connector seen from solderside A C B 3.5 stereo jack A B C ComCab-004 5 4 3 2 1 9 8 7 6 A = pin 2 = TX B = pin 3 = RX C = pin 5 = GDN DB09-female
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface B&O receiver interface B&O TT--8087030 1 2 3 4 5 1 - C Ground 2 - A 5 volt 3 - B signal Jack connector seen from solderside C B A A C B
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface 3-way high-power booster output FRONT Low-power output REAR You can check the LED flashes with mobile in camera mode TT--ET03
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface Digital input The input is known in the Memory Map as: Digital Input 1 1 2 3 4 Do not connect 12 volt. Polarity-free contacts only. GND
LIN-433 / LinTronic InfraRed RadioFrequency Computer Interface Internal relay The relay is controlled in the Memory Map as: LinTronic, LIN-433, Relay 1 2 3 4 Relay in Relay out Low-voltage only. Not designed for 115-230 vac.
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Example of use: Controlling relay for light, curtains, garagedoor, etc. LIN-433 can be simultanesly controlled by a B&O remote, an X10 panel, a computer and a contact/relay and convert VELLEMAN VM130 into a mixture of, RS232 and 433 MHz. Controller, RS-232 X10 signal Digital input RF signal Light, curtains, blinds, garagedoor, gate, etc. Relay 1 Relay 2, controlling audio/video, fireplace, etc. etc.
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Example of use, multicontrol: LIN-433 can be simultanesly controlled by a B&O remote, an X10 panel and a contact/relay and convert into a mixture of, RS232 and 433 Mhz. Light, CoffeeMachine, ironing tool, etc. X10 signal RS-232 Relay RF signal Curtains, blinds, garagedoor, gate, etc. Doorbell
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI LongRange wireless control of your home Operate your remote to control your audio/video products, light, fireplace, garagedoor etc. - even at the other end of the house - using the multihop repeater. Relay RS-232 Rel RS-232 Relay LRF LRF RS LRF = LinTronic RF LRF = LinTronic RF
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Example of use, for protection: An outside motion sensor turns on light inside the house and rings the doorbell. Relay X10 signal RS-232 RF signal Light Doorbell
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Example of use, X10: Operate the X10 wall panel to control a local product by and a remote product by RS232, InfraRed or relay - or use the LIN-433 to expand an X10 signal. X10 signal Relay RS-232 LRF Relay RS-232 X10 signals LRF = LinTronic RF
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Example of use, computer: Crestron, AMX, computer or any other controller with USB or RS232, can send commands to control a relay, infrared or an RS232 command. USB/RS-232 Relay RS-232 LRF LRF = LinTronic RF
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Example of use, computer: The TellStick can be used to send 433.92 MHz commands to a LIN-433. Relay RS-232 LRF LRF = LinTronic RF
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Example of use: Enhance your security system A camera with motion sensors can trigger a LIN-433 to send out an RF signal, which will activate an infrared projector turning on invisible light for better camera pictures, and also sound a doorbell inside the house. LRF LRF motion triggered projector controller inside warning LRF = LinTronic RF LRF = LinTronic RF Camera with motion trigger Infrared projector Doorbell
433-1 LIN-433 - Lintronic / LinTronic InfraRed Radio-wave RadioFrequency Computer Computer Interface Interface - LCI Automatic repeater function A Lin-433 will automatically repeat an incoming LinTronic command to the next LIN-433. If you need to send the signal 450 meters, then it is repeated by number 2 and number 3 in order to reach number 4. 150 meter 150 meter 150 meter 150 meter 1 2 3 4 5