Wireless DMX Connector

Transcription

1 Introduction Wireless DMX Connector (Model No. M-122) Traditionally, the DMX512 signal transmission depends on the way to the twisted pair 485 in some occasions (such as large-scale outdoor performance activities). If the transmission distance is faraway or the occasion is special, the dimming divisions are most concerned about the problem that the wiring is not flexible enough. DMX512 wireless connectors (receive/deliver modems) transfer the data with 2.4G wireless frequencies in the air, and input / output is the DMX512 standard signal..the product is completely solved the DMX512 protocol in the wireless data transmission between lighting control and lights. Then you can rely on it instead of traditional twisted pair or DMX distribution amplifier. In data transmission process, It makes the data real-time and reliable, and it use flexibly, with the function that a host with multiple handset and the ability of high anti-interference. DMX512 Characteristics of the Wireless Transmitter 1. To meet the standards of international standard DMX512 protocol. 2. GFSK modulation with high efficiency, high anti-interference ability and low error rate, high-efficiency forward error correction channel coding technology to improve the data against burst interference. 3. CRC error detection with hardware verification techniques. 4. Low-power transmitter, the maximum transmit power 20dBm, open spaces transmission distance up to 500m. (Plus an external power amplifier and directional antenna can transmit up to 10 km distance). 5. Working frequency is the global open ISM band, frequency tunable 2.4G-2.524GHz (125 channels can be changed by DIP switch); 6. For multipoint applications (as long as the pull of both sending and receiving the same code bit is set, you can communicate.) 7. Adjustable number of channels transmitted (512/360). 8. A machine can be set to receive mode or transmit mode, use very flexible and convenient, there is a corresponding mode indicator. 9. Plug & Play, convenient, high-speed communications - without delay, real-time data is good. DMX512 Wireless Transmitter Applications Suitable for large-scale theatrical performances, sports lighting control, temporary stage performances, television stations, convention centers, theme parks, dance halls, bars, university or professional theaters, small theatrical performances, urban lighting system in the scanner console, stage lighting control and DMX512 signal control all required system. 1

2 Specifications Power: DC9V (external AC110V-220V electronic transformer) Total Power: 1W Digital Signal: DMX512/1990 Interface type: RS-485 DMX signal (output / input) connector: XLR-D3F Operating frequency: 2.4GHz-2.524GHz (125 channels) Antenna Interface: SMA standard port Setting Mode: DIP switch Size: 81 * 81 * 25 (mm) Net Weight: 0.35KG Gross weight: 0.5KG 2

3 Usage Panel As Shown In Figure: Figure 1(the front panel) Figure 2 (the back panel) (Figure 1)Panel Description: 1, Working Mode DIP10 Selected by DIP switch mode DIP10 Status LED Function Remarks DIP 10 OFF RX Wireless Mode DMX Port Access Fixture ON TX Wireless Transmission Mode DMX Port Access Controller TX Working in transmission mode light, the rear panel of the DMX-Socket connected console; RX Working in the receiving mode, the rear panel of the DMX-Socket connect the controlled equipment (such as the moving-head fixture, the PAR fixture) 3

4 2, Channel Mode Settings DIP9 Selected by DIP switch DIP9 wireless transmission DMX channel model DIP 9 Status Function Remarks ON 360 CH Wireless Transmission Channels OFF 512CH When the actual console access on a small number, please DIP9 set 360CH mode, so it can get a faster refresh rate. 3, The Working Channel (Frequency) Set the DIP 1-7 DIP 1 7 Status Function Remarks 8421 Encoded Working channel Selection MAX:125 CH Range :0-124 (125 channels) For example: DIP1 are all ON, said a Channel You can communicate properly,when the work of both are in the same channel set. If there are multiple similar peripheral wireless DMX connectors work, and connect the different console, you can change this value to achieve without disturbing each other. 4

5 Fast Setup Guide 1,Link Sketch Map.Can be accessed an unlimited number of receivers Fast Connection Establishment For example: To set the operating frequency in the 8-channel, set as follows: Setting Transmitting End (DMX socket connect the console ) Setting Receiving End ( DMX socket connect the controlled Lighting) Installation Notes 1, If there are our two products working on the launching state in the surrounding, please set the working channel in the different value. ( If not, the same frequency will have an impact on communication.) 2, The transmission distances of wireless light control (modem) will be change for the use of different environments and different terrain. between the two devices (transmitter and receiver), try to be accessibility as possible as you can. If it can not be avoided the obstacles, just only use some wood or plastic which will also affect the communication distance, because the metal will greatly reduce the communication distance. 5