2015 Industrial Catalog

2015 Industrial Catalog

Table of Contents Super Hydrophilic Filter Cartridge 3 Pleated Filter Cartridge 4 Hurricane Filter Cartridge 5 M-Series PP Filter Cartridge 6 M-Series PES Filter Cartridge 7 M-Series N6 Filter Cartridge 8 M-Series PTFE Filter Cartridge 9 M-Series PVDF Filter Cartridge 10 Depth Stack Filter Cartridge 11 String Wound Filter Cartridge 12 CIC Series Filter Cartridge 13 HAD Filter Cartridge 14 HF Series Filter Cartridge 15 BC Series Filter Cartridge 16 Capsule Filter Cartridges 17 Darlly Filter, LLC s Mission Statement: Darlly Filter, LLC strives to provide quality products and services to our customers. To treat our customers and coworkers in a kind and friendly manner. To be a positive influence in the community. Darlly Filter, LLC is dedicated to providing filtration products that provide quality protection with value pricing. We wish to establish a successful partnership with our customers, our employees, and our distributors worldwide, that respect the interests and goals of each party. Success will be measured by our industry choosing us because of their belief in our ability to meet or exceed their expectations of price, service, and expertise.

Super Hydrophilic Membrane Filter Cartridge Excellent performance of chemical compatibility Hydrophilic properties allow for easy integrity testing and saves operating time Non-Fiber releasing according to pharmaceutics and food industry requirements 100 % Integrity tested Flushed with ultrapure water RDA Compliance material Pharmaceuticals Food and Beverage Bottled water Microbial engineering Chemical industry Description: Our Super-Hydrophilic Membrane Filter is constructed of imported hydrophobic Polyrethersulfone (PES) membrane media and non-woven support materials. The inert and highly asymmetric PES membrane provides high efficiency retention to contaminating organisms. The adaptors are thermally welded without the use of glues or adhesives to prevent any possibility of pollution. Dimensions End Caps Micron Rating Max Operating Temperature Max Operating Pressure Specifications for SH Filter Cartridges 2.7 (69mm) 9.75 (248mm), 10 (254mm), 20 (508mm),30 (762mm), 40 (1013mm) PES Silicone, EPDM, NBR, Viton, Teflon, E-FKM 0.1µm, 0.22µm, 0.45µm, 0.65µm 176 F (80 C) 4.2 Bar @ 77 F (25 C) Organize as: SH - * - + - # - + - X (example: SH-0.22-10-J-S) 0.1 0.1µm 0.22 0.22µm 0.45 0.45µm 0.65 0.65µm 975 9.75 (248mm) 987 9.87 (250mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1016mm) F H J K M P Q R T V Code CC DOE 213/Flat 222/Flat/SS 222/Fin/SS 222/Flat 222/Fin 226/Fin 226/Fin/SS 226/Flat 226/Flat/SS DD S Silicone E EPDM B NBR V Viton T Teflon F E-FKM S Blank Core EE Stainless Steel

Pleated Filter Cartridge Pleated design increased surface area and contaminant removal Low pressure drop Designed for general water filtration purposes Longer filtration runs ensure fewer change outs and less maintenance General water and R.O. treatment Food and Beverage Acid-based liquid in chemical processing Industrial chemicals and organic solvents Processing of sterile water and ultrapure water Industrial water and plating liquid Description: Our Pleated Filter Cartridge is constructed out of non-woven polyester with a polypropylene core to provide maximum strength. The ends are immersed in thermo setting vinyl plastisol which seals the end of each pleat uniting the three components and forming a strongly bonded end cap for enclosed sealing to avoid bypass. This makes the Polyester pleated Filter Cartridge great for residential, commercial, and industrial applications. Dimensions Specifications for Pleated Filter Cartridges Outside diameter 2.7 (68mm), 4.5 (115mm) Inner diameter (28mm) 9.75 (248mm), 9.87 (251mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1016mm) Polyester End Caps PU/Plastisol Center Core Pure. Micron Rating 1µm, 5µm, 10µm, 20µm, 50µm Max Operating Temperature 100 F (37.8 C ) Max Operating Pressure 4.0Bar Organize as: PFC - - - CC - DD (example: PFC-25-1-987-A) 25 2.5 (63mm) 45 4.5 (115mm) 1 1µm 5 5µm 10 10µm 20 20µm 50 50µm CC 975 9.75 (248mm) 987 9.87 (250mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1016mm) A B C Media Type DD Polyester PP Cellulose

Hurricane Filter Cartridge Pleated design increased surface area and contaminant removal Low pressure drop Designed for general water filtration purposes Longer filtration runs ensure fewer change outs and less maintenance Pool and Spa General water and R.O. treatment Acid-based liquid in chemical processing Industrial chemicals and organic solvents Processing of sterile water and ultrapure water Industrial water and plating liquid Description: Our Hurricane Filter Cartridges are made of pleated polyester filter media for a low pressure drop, increased surface area and longer life span. This filter is designed for general water filtration processes Dimensions Specifications for Hurricane Filter Cartridges Outside diameter 7-3/4 (197mm) 9-5/8 (245mm), 19-1/2 (495mm), 30-3/4 (781mm) Polyester, Cellulose End Caps PU/Plastisol Micron Rating 1µm, 5µm, 10µm, 20µm, 50µm Max Operating Temperature 140 F (60 C) Max Operating Pressure 40 PSI Organize as: HC - - - CC (example: HC-1-987-A) 40 9.75 (245mm) 90 19.50 (508mm) 170 30.75 (781mm) 1 1µm 5 5µm 10 10µm 20 20µm 50 50µm Media Type CC A Polyester C Cellulose

M-Series PP Pleated Cartridge FDA compliance material Full range micron ratings Graded pore density for an increased dirt holding capacity Low pressure drop, long service life. Pleated design for an increased Filtration area Excellent chemical compatibility Pharmaceuticals Food and Beverage Oil & Gas Microelectronics Chemical Industry Pre-filtration for RO Paints and Coatings Cosmetics Photographic and Painting solutions Description: Our PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1 to 50µm. The high surface area ensures long service life and low initial pressure drops. Series cartridges are available in a wide range of configurations to fit most commercially available filter housings. Dimensions Specifications for M-Series PP Filter Cartridges 2.7 (69mm) 9.75 (248mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1013mm) Core/Core/End Cap Silicon, EPDM, NBR, Viton, Teflon, E-FKM Support/Drainage 0.1 µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, 50µm Max Operating Pressure 1.0 Bar @ 86 F (30 C) Max Differential Pressure 4.0 Bar Sterilization Temperature: 5 times, 20 minute cycles @ 248 F (120 C) Organize as: MPP - - CC - DD EE (example: MPP-0.1-10-F-S-S) 0.1 0.1µm 0.22 0.22µm 0.45 0.45µm 1 1µm 3 3µm 5 5µm 10 10µm 20 20µm 50 50µm 975 9.75 (248mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1013mm) F H J K M P Q R T V Code CC DOE 213/Flat 222/Flat/SS 222/Fin/SS 222/Flat 222/Fin 226/Fin 226/Fin/SS 226/Flat 226/Flat/SS S E B V T F DD Silicone EPDM NBR Viton Teflon E-FKM S Blank Core EE Stainless Steel

M-Series PES Pleated Cartridge FDA compliance material Full range micron ratings Hydrophilic membrane with increased flow rate Non-fiber releasing according to pharmaceuticals and food industry requirements Low pressure drop, long service life. Pleated design for an increased Filtration area Excellent chemical compatibility Pharmaceuticals Food and Beverage Chemical Industry Description: Our PES Pleated Filter Cartridge is constructed of imported polyethersulfone (PES) membrane media and non-woven support materials and the adaptors are thermally welded without the use of glues or adhesives to prevent any possibility of pollution. Dimensions Specifications for M-Series PES Filter Cartridges 2.7 (69mm) 9.75 (248mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1013mm) PES Core/Core/End Cap Silicon, EPDM, NBR, Viton, Teflon, E-FKM Support/Drainage Micron Rating 0.1 µm, 0.22µm, 0.45µm, 0.65µm, 0.8µm, 1µm Max Operating Temperature 176 F (80 C) Max Differential Pressure 4.2 Bar @ 77 F (25 C) Sterilization Temperature: 20 times, 30 minute cycles @ 248 F (120 C) Organize as: MPES - - - CC DD EE (example: MPES-0.1-10-F-S-S) 0.1 0.1µm 0.22 0.22µm 0.45 0.45µm 0.65 0.65µm 0.8 0.8µm 1.2 1.2µm 975 9.75 (248mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1013mm) F H J K M P Q R T V Code CC DOE 213/Flat 222/Flat/SS 222/Fin/SS 222/Flat 222/Fin 226/Fin 226/Fin/SS 226/Flat 226/Flat/SS DD S Silicone E EPDM B NBR V Viton T Teflon F E-FKM S Blank Core EE Stainless Steel

M-Series N6 Pleated Cartridge Hydrophillic Membrane with high Flow Full range micron ratings Non-fiber releasing according to pharmaceutical and food industry requirements 100 percent integrity tested Pleated design for an increased Filtration area Flushed with Untrapure water Pharmaceuticals Food and Beverage Semiconductor Description: Our N6 Pleated Filter Cartridge is constructed of Nylon6 media and non-woven support materials. All media and adaptors are thermally welded without using any type of glue or adhesive, to prevent any possibility of pollution. Dimensions Specifications for M-Series PP Filter Cartridges 2.7 (69mm) 9.75 (248mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1013mm) Nylon6 Core/Core/End Cap Silicon, EPDM, NBR, Viton, Teflon, E-FKM Support/Drainage 0.1 µm, 0.22µm, 0.45µm Max Operating Pressure 4.2 Bar @ 77 F (25 C) Max Differential Pressure 2.1Bar @ 77 F (25 C) Sterilization Temperature: 5 times, 20 minute cycles @ 248 F (120 C) Organize as: MN6 - - CC - DD - EE (example: MN6-0.1-10-F-S-S) 0.1 0.1µm 0.22 0.22µm 0.45 0.45µm 975 9.75 (248mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1013mm) F H J K M P Q R T V Code CC DOE 213/Flat 222/Flat/SS 222/Fin/SS 222/Flat 222/Fin 226/Fin 226/Fin/SS 226/Flat 226/Flat/SS DD S Silicone E EPDM B NBR V Viton T Teflon F E-FKM S Blank Core EE Stainless Steel

M-Series PTFE Pleated Cartridge FDA compliance material 100 Percent integrity tested Hydrophilic membrane with increased flow rate Non-fiber releasing Low pressure drop, long service life. Pleated design for an increased Filtration area Excellent chemical compatibility Fermentation Tank Vent Filter of Hold Tank Electronic Industry Semiconductor: Ultrapure Gas Filtration Chemical Industry Description: Our PTFE Pleated Filter Cartridge is constructed of imported natural hydrophobic Polytetrafluoroethylene (PTFE) membrane media and non-woven support materials. The adaptors are thermally welded without the use of glues or adhesives to prevent any possibility of pollution. Dimensions Specifications for M-Series PTFE Filter Cartridges 2.7 (69mm) 9.75 (248mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1013mm) PES Core/Core/End Cap Silicon, EPDM, NBR, Viton, Teflon, E-FKM Support/Drainage Micron Rating 0.01 µm, 0.02µm, 0.1µm, 0.22µm, 0.45µm Max Operating Temperature 176 F (80 C) Max Differential Pressure 4.2 Bar @ 77 F (25 C) Sterilization Temperature: 100 times, 30 minute cycles @ 248 F (120 C) Organize as: MPTFE - - - CC DD - EE (example: MPTFE-0.1-10-F-S-S) 0.01 0.01µm 0.02 0.02µm 0.1 0.1µm 0.22 0.22µm 0.45 0.45µm 1.2 1.2µm 975 9.75 (248mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1013mm) F H J K M P Q R T V Code CC DOE 213/Flat 222/Flat/SS 222/Fin/SS 222/Flat 222/Fin 226/Fin 226/Fin/SS 226/Flat 226/Flat/SS DD S Silicone E EPDM B NBR V Viton T Teflon F E-FKM S Blank Core EE Stainless Steel

M-Series PVDF Pleated Cartridge Hydrophobic membrane with increased flow rate Low pressure drop, long service life. Pleated design for an increased Filtration area Excellent chemical compatibility Large-scale fermenter air Intermediate product vessel venting Autoclave vacuum break Instrument air Air and gas service lines Description: Our PVDF Pleated Filter Cartridge is constructed of imported natural hydrophobic Polyvinylidene Fluoride (PVDF) membrane media and non-woven support materials. The adaptors are thermally welded without using any glues or adhesives to prevent any possibility of pollution. Dimensions Specifications for M-Series PVDF Filter Cartridges 2.7 (69mm) 9.75 (248mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1013mm) PVDF Core/Core/End Cap Silicon, EPDM, NBR, Viton, Teflon, E-FKM Support/Drainage Micron Rating 0.1 µm, 0.22µm, 0.45µm Max Operating Temperature 1.0 Bar @ 176 F (80 C) Max Differential Pressure 4.2 Bar @77 F (25 C) Sterilization Temperature: 100 times, 30 minute cycles @ 248 F (120 C) Organize as: MPVDF - - - CC - DD - EE (example: MPVDF-0.1-10-F-S-S) 0.1 0.1µm 0.22 0.22µm 0.45 0.45µm 975 9.75 (248mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1013mm) F H J K M P Q R T V Code CC DOE 213/Flat 222/Flat/SS 222/Fin/SS 222/Flat 222/Fin 226/Fin 226/Fin/SS 226/Flat 226/Flat/SS DD S Silicone E EPDM B NBR V Viton T Teflon F E-FKM S Blank Core EE Stainless Steel

Depth Stack Filter Cartridge Back-washable, resulting in high throughput Easy and reliable handling ridged external clips prevent damage of the filter material during module loading and unloading No filter material deformities after heat treatment No adverse effects to filter sheets when in contact with hot sanitization Separator design increases the stability of the filter cartridge, as the separators support the sheet material Particle Removal Final Filtration (gem removal) Chill Haze removal Bottling Filtration Polish Filtration Clarifying filtration Filtration after stabilization Pre-filtration prior to final membrane filters Description: Our Depth-Stack Filter Cartridges are a new type of filter using depth filter sheets. It is designed using a double separator concept. The Separator design increases the total stability of the filter cartridges as the separators fully support the sheet material. This design also prevents filter sheet deformities after heat treatments and adverse effects of contact with hot sanitation. It is manufactured with rigid external clips to prevent damaging filter sheets during module loading and unloading while allowing for easy and reliable handling. Specifications for DS Filter Cartridges Dimensions 8 (2.3mm), 12 (304mm), 16 (406mm) Sheet Media Cellulose fibers, Natural Diatomaceous Earth, Perlite, etc. Core/Separator Double O-ring/Gasket Silicon, EPDM, NBR, Teflon Typical Ratings: C002 0.2-0.4µm C004 0.4-0.6µm C100 1-3µm C150 2-5µm C200 3-7µm Organize as: DS - - - CC - DD - EE (example: DS-08-12-E-C002-S) 08 8 (2.3mm) 12 12 (304mm) 16 16 (406mm) 7 7cell 8 8cell 9 9cell 12 12cell 14 14cell 15 15cell 16 16cell CC E EPDM B NBR E EPDN S Silicon DD C002 0.2-0.4µm C004 0.4-0.6µm C100 1-3µm C150 2-5µm C200 3-7µm Connection Types EE S Double O-Ring C Flat Gasket

String Wound Filter Cartridge Fits most standard housings Low Pressure drop High Dirt holding capacity to ensure a long service life Made of various filter media to fit all applications Pre-Filter for drinking water treatment Acid base liquid in chemical procession Food and Beverage Semiconductor Pharmaceuticals Description: String wound cartridges are manufactured with structured open outer layers and tight inner layers to offer true depth filtration for high dirt holding capacity and extremely low media migration. The main advantage of the string wound filter cartridge is its exceptionally high structural strength, therefore, they can withstand higher PSID and severe operating conditions. Dimensions Specifications for String Wound Filter Cartridges 2.5 (63mm), 4.5 (115mm) Inner Diameter 1.1 (28mm),1.2 (30)mm 9.75 (248mm), 9.87 (251mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1016mm), Bleached Cotton, Glass Fiber Core, Stainless Steel Micron Rating 1µm, 5µm, 10µm, 20µm, 30µm, 50µm, 75µm, 100µm Max Operating Temperature () 140 F (60 C) Recommendation material for non-organic solvent Max Operating Temperature (Bleached Cotton) 248 F (120 C) Bleached Cotton Recommendation Bleached Cotton Material filter cartridge with stainless steel core used for organic solvent, water, oil, alkalinity solvent, beverage, pharmaceutical Organize as: SW - - - CC - DD (example: SW-25-20-987-A) 25 2.5 (62mm) 45 4.5 (115mm) 1 1µm 5 5µm 10 10µm 20 20µm 30 30µm 50 50µm 75 75µm 100 100µm CC 975 9.75 (248mm) 987 9.87 (250mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1016mm) A B C D E Material DD PP Yarn and PP Core Cotton Yarn and SS Core Cotton Yarn and PP Core Glass Fiber and SS Core PP Yarn and SS Core

CIC Series Filter Cartridge Nominal 10 Micron Rating Excellent dirt holding capacity to ensure a longer filter life Filtrations and Adsorption finished in ne time process Plating solution Photograph development solutions Drinking water and R.O. pure water treatment Smell, odor, organic pigment removal Solutions to remove oil and aromatic Removal of organic chemicals Removal dissociative chlorine and volatile organic compounds (VOS) in solutions Description: The Carbon Impregnated Cellulose (CIC) Filter Cartridges combine the performance of depth filtration with the absorption of activated carbon fine. The outside deep filter media can remove particles while the activated carbon held within the filter cloth can absorb the smell, odor, sediment, pigment. VOC, and organic chemicals. The inside fiber filter prevents carbon particles and fine pollutants form passing through, thus increasing an efficient Quality and Integrated filtration. Dimensions Specifications for CIC Filter Cartridges 2.28 (58mm), 4.5 (115mm) Inner Diameter 1.1 (28mm) 9.75 (248mm), 9.87 (251mm), 10 (254mm), 20 (508mm) Support/Drainage Connection Type Thread Micron Rating 10µm Max Operating Temperature 180 F (82 C) Max Operating Pressure 2.8Bar, 150 F (65 C) Organize as: CIC - - - CC (example: CIC-25-10-987) 25 2.28 (58mm) 45 4.5 (115mm) 10 10µm CC 975 9.75 (248mm) 987 9.87 (250mm) 10 10 (254mm) 20 20 (508mm)

HAD Series Filter Cartridge High filtration efficiency High Flow Rate Longer filtration runs ensure fewer change outs and less maintenance Made of strong durable material Drinking Water Treatment Electronic Industrial Water Treatment Planting Chemicals, Solvents Description: The HAD Series-High and Absolutely Depth Filter is manufactured using no glue used, this product shows advantages on the gradient of rating providing more micron rating rates and a cartridge that is stronger than the general melt blown filters. This makes micron rating more accurate. Dimensions Specifications for HAD Series Filter Cartridges 2.5 (63mm), 4.5 (115mm), Custom sizes available upon request Inner Diameter 1.1 (28mm),1.2 (30)mm 9.75 (248mm), 9.87 (251mm), 10 (254mm), 20 (508mm), 30 (762mm), 40 (1013mm), 50 (1270mm), 60 (1524mm) Core End Caps Gaskets/O-ring Silicon, EPDM, NBR, Viton Micron Rating 1µm, 3µm, 5µm, 10µm, 25µm, 50µm, 75µm, 100µm, 150µm Max Operating Temperature 180 F (82 C) Organize as: HAD - - - CC - DD - EE (example: HAD-1--A) 25 2.5 (62mm) 45 4.5 (115mm) 1 1µm 3 3µm 5 5µm 10 10µm 25 25µm 50 50µm 75 75µm 100 100µm 150 150µm CC 975 9.75 (248mm) 987 9.87 (250mm) 10 10 (254mm) 20 20 (508mm) 30 30 (762mm) 40 40 (1016mm) 50 50 (1270mm) 60 60 (1524mm) End Cap Type DD Blank DOE (no end caps) F DOE (gasket/gasket) M 222/Flat P 222/Fin T 226/Flat Q 226/Fin EE S Silicone E EPDM B NBR V viton

HF Series Filter Cartridge Gradient pore structure High flow rate per filter cartridge Up to 40 times fewer cartridges to change out Up to 50 percent smaller filter systems possible Available in a verity of filter lengths and grades. Inside-to-outside flow pattern that traps contaminants inside the element to prevent the pollution of the treated water. Designed for easy-handling/cartridge replacement. Prefiltration of RO and Pretreatment of sea water desalination Condensate water filtration API, solvents, and water filtration in BioPharm market The filtration of bottled water, high fructose, edible oil, soft drinks, and milk. Paints and coatings, Petrochemical, Refineries Microelectronics, film, fiber, and resin Description: HF Series Pleated Filter cartridges have a 6 inch/152mm large diameter, and is a coreless, single open-ended cartridge with an inside to outside flow pattern. The large diameter with big filter area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flow rate result in low investment and less manpower in many applications Dimensions Specifications for HF Series Filter Cartridges Outside diameter 6 (152mm) 20 (528mm), 40 (1022mm), 60 (1538mm) Pleated, Melt Blown, Pleated Glass Fiber End Caps Glass Fiber reinforced EPDM, NBR Support/Drainage Micron Rating 1µm, 4.5µm, 6µm, 10µm, 20µm, 40µm, 70µm, 100µm Max Operating GF: 250 F (121 C), PP: 180 F (82 C), PM: 150 F (65 C) Temperature Max Operating GF: 3.4 Bar@250 F(121 C), PP: 3.4Bar@180 F(82 C), PM:1Bar@150 F(65 C) Pressure Suggested Max Flow 20 : 660LPM, 40 : 1300LPM, 60 : 1900LPM Recommended Change Out Differential Pressure: 2Bar@68 F (20 C) Organize as: HF- CC DD (ex. HF-20-PP-10-E) Cartridge (inches/mm) 20 20.69/525 40 40.69/1033 60 60.69/1541 PP PM GF Media Type PP Pleated PP Melt Blown Pleated Glass Fiber CC 1 1µm 4.5 4.5µm 6 6µm 10 10µm 20 20µm 40 40µm 70 70µm 100 100µm E B O Ring Material DD EPDM NBR

BC Series Filter Cartridge High performance filter media Pleated configuration with high filtration area Large 154mm cartridge diameter suitable for high flow and high contaminant applications High mechanical strength Easy retrofit into existing size1 and size2 bag housings Pre-filtration of RO and sea water desalination Condensate, make-up, rinse, process cooling water API, solvents, and water filtration in BioPharm market Filtration of bottled water, high fructose, edible oil, soft drinks, and milk Automotive Paints, inks, CD/DVD, magnetic media, Petrochemical, Refineries Microelectronics, film, fiber, and resin Description: The BC Series Filter Cartridges are designed to combine the performance advantages of cartridge filters with the ease use of bag filter systems. It offers a unique combination of benefits and unmatched economics. Dimensions Specifications for BC Filter Cartridges 6 (154mm) 6.7 (170mm) for size 1 bag, 25 (634mm) for size 2 bag Pleated Depth (PP) End Caps Support Drainage Adjustable Falange EPDM, NBR Micron Rating 0.5µm, 1µm, 3µm, 5µm, 10µm, 20µm, 40µm, 70µm, 100µm, 120µm Max Operating Temperature 176 F (80 C) Max Operating Pressure 3.4Bar, 140 F (60 C) Recommended Change Out 2.4Bar, 68 F Organize as: BC - - - CC DD EE (example: BC-1-10-E-B-A) Cartridge length (mm) 1 370(size 1 bag) 2 634(size 2 bag) 0.5 0.5µm 1 1µm 3 3µm 5 5µm 10 10µm 20 20µm 40 40µm 70 70µm 100 100µm 120 120µm CC E EPDM B NBR B C Flange Types DD Side entry housing Over the top housing A B Flange EE 183(size 1 bag) 177(size 2 bag)

Capsule Filter Cartridges Wide variety of filter media and micron ratings Manufacture in clean room environment Absolutely bio-safe and non-toxic Filter areas and flow rates vary based on capsule size. Pharmaceutical Industry Chemical Industry Electronics Bioechnology Cosmetics Food and Beverage Ink Description: Our Capsule Filters are ready-to-use units for critical applications and small volume flows of gases and liquids. All filter units consist of a durable polypropylene housing and are available in various filter media and pore sizes. The housing units are thermal welded and all capsule filters are made with different connections. They are manufactured in a clean room environment and are delivered in double sealed packaging to avoid any possible contamination. Specifications for M-Series PTFE Filter Cartridges, PES, PTFE, Nylon6, GF Filter Housing Support Material Sealing Thermally Welded 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, 30µ, 50µm PTFE Liquid 00.1µm, 0.22µm, 0.45, Gas 0.01µm, 0.02µm PES 0.05µm, 0.1µm, 0.22µm, 0.45µm, 0.65µm, 0.8µm, 1.2µm Nylon6 0.1µm, 0.2µm, 0.45µm, 0.65µm, 1µm Organize as: MODEL NUMBER - - (example: 505-A-10) Model Number 128 601 741 136 624 743 219 702 148 227 703 149 306 704 150 325 707 151 414 709 152 415 710 753 416 711 754 418 712 553 505 722 554 517 726 555 519 734 831L 523 738 A B C D E Media PES PTFE Nylon6 GF Micron Rating 0.01 0.01µm 0.02 0.02µm 0.1 0.1µm 0.22 0.22µm 0.45 0.45µm 0.65 0.65µm 0.8 0.8µm 1 1µm 1.2 1.2µm 3 3µm 5 5µm 10 10µm 20 20µm 50 50µm

Dimensions: Code: 128 In/Out: 1/4 Hose Barb Vent: N/A Code: 136 In/Out: 1/8 Swagelok Code: 219 In/Out: Luer Lock Code: 227 In/Out: 1/8 Hose Barb Code: 306 In: 1/8 NPTM Out: 1/4 NPTM Filtration Area: 35cm² Code: 325 In/Out 1/4 Luer Slip Vent/Drain: 1/4 Luer Slip Code: 414 In/Out: 1/4 Swagelok Filtration Area: 9.5 cm² 14225 Telephone Avenue Unit A Chino, CA 91710 USA Web: www.darllyfilter.com Email: Info@DarllyFilter.com

Dimension Continued.. Code: 415 In/Out: 1/4 Swagelok Filtration Area: 9.5 cm² Code: 416 In/Out: Luer Lock Filtration Area: 9.5 cm² Code: 418 In: 1/4 NPTM Out: 3/8 HB OUT Filtration Area: 150 cm² Code: 505 In: Hose Barb Out: 1/4 NPTM Vent: Luer Lock Filtration Area: 455cm² Code: 517 In/Out: 1/4-3/8 Hose Barb Filtratiopn Area: 13.8 cm² Code : 519 In/Out: 1/4 Swagelok Vent: Luer Lock Filtration Area: 250cm² 14225 Telephone Avenue Unit A Chino, CA 91710 USA Web: www.darllyfilter.com Email: Info@DarllyFilter.com

Dimension Continued Code: 523 In/Out: 1/4 Swagelok Code: 601 in/out: 1/3 Swagelok Vemt/Drain: 1/8:NPTM Filtration Area: 455cm² Code: 624 In/Out: 1/4 Swagelok Vent: N/A Filtration Area: 560cm² Code: 702 In/Out: 1/4 Swagelok Vent/Drain: 1/4 Swagelok Filtration Area: 11234cm² Code 703 In/Out: 3/8 Swagelok Vent/Drain: 1/4 Swagelok Filtration Area: 1920cm² Code: 704 In/Out: 1/4 Swagelok Vent: 1/8 Swagelok Filtration Area: 840 m² 14225 Telephone Avenue Unit A Chino, CA 91710 USA Web: www.darllyfilter.com Email: Info@DarllyFilter.com

Dimensions Continued Code: 707 In/Out: 1/4 Stepped Hose Barb Vent: 1/4 Swagelok Filtration Area: 570cm² Code: 709 In/Out: 1/4 NPTM Vent/Drain: 1/8 NPTM Filtration Area: 840cm² Code:710 In/Out: 1/2 Swagelok Vent/Drain:1/4 Swagelok Filtration Area: 1920cm² Code: 711 In/Out: 1/4 Swagelok Filtration Area: 358cm² Code: 712 In/Out: 1/4 NPTM Vent: 1/4 Swagelok Filtration Area: 1134cm² Code: 722 In/Out: 1/4 Swagelok Vent: N/A Filtration Area: 1300cm² 14225 Telephone Avenue Unit A Chino, CA 91710 USA Web: www.darllyfilter.com Email: Info@DarllyFilter.com

Dimensions Continued Code: 726 In/Out: 1/4-1/2 Hose Barb Vent/Drain: N?A Filtration Area: 30cm² Code: 734 : EPDM Filtration Area: 350cm² Code:738 In/Out: 1/4 Swagelok Vent/Drain:1/4 Swagelok Filtration Area: 1200cm² Code: 741 : EPDM Filtration Area: About 1200cm² Code: 743 In/Out: 1/8 Swagelok Code: 148 1/8 Swagelok Code: 149 1/4 Swagelok Code: 150 1/8 Swagelok 14225 Telephone Avenue Unit A Chino, CA 91710 USA Web: www.darllyfilter.com Email: Info@DarllyFilter.com

Dimensions Continued Code: 151 1/4 Swagelok Code: 152 Code:753 In/Out: 1/2 NPT Vent/Drain: Luer Lock Code: 754 In/Out: 3/8 NPT Vent/Drain: Luer Lock Code: 553 M10X1-1/4-3/8 HB Code: 554 M10X1.5-4/4-3/8 HB Code: 555 M10X1.5-M10X1.5 Code: 150 1/8 Swagelok 14225 Telephone Avenue Unit A Chino, CA 91710 USA Web: www.darllyfilter.com Email: Info@DarllyFilter.com

TERMS AND CONDITIONS: It is agreed that the buyer will pay all invoices within stated terms and agrees to all terms contained in invoices supplied by Darlly Filter, LLC. These terms may be amended from time to time. Buyer authorizes Darlly Filter, LLC. to investigate buyer's credit standing, financial circumstances and authorizes and instructs all persons having information concerning buyer's credit standing, financial circumstances to release such information to Darlly Filter, LLC., its agents, attorneys or employees. All of the information supplied by the buyer is correct to the best of the knowledge of the undersigned, and the buyer understands that all goods or services purchased from Darlly Filter, LLC are subject to all terms and conditions contained in this credit application and agreement and all other terms and conditions associated with the costumers invoice. ORDERING: You can order by phone, fax, and/or email. Be sure to provide us with your complete company name, address, resale license number (for first time customers) and phone number in case we need more information. Eliminate costly errors and delays by using the alphanumeric Darlly Filter, LLC. part number provided. You may call Customer Service from 8:00 am to 5:00 PST, Monday - Friday, at (909) 591-7999. To order by email Sales@DarllyFilter.com. For your convenience our fax line is open 24 hours a day 7 days a week at (909) 591-9555. PAYMENTS: Payment of merchandise is due within the terms specified on the invoice. With established credit our standard terms of payment are Net 30 days. New accounts are welcome -- we simply request that you submit a completed credit application and new account packet for our review. New accounts will be placed on a C.O.D. CASH or Credit Card basis until a credit application is submitted and a credit check is satisfactorily completed FINANCE CHARGE/LATE PENALTY: In the event of any default or late payment of fees or costs, a penalty/late charge will be imposed at a rate of 2% (24% annual percentage rate) on the unpaid balance together with reasonable collection costs and fees, including attorney fees, effective January 1, 2014. RETURNED CHECKS: There will be a $25.00 service charge invoiced to your account if we receive your check back because of non-sufficient funds (NSF). If any returned checks are received, your account could be placed on a C.O.D. CASH ONLY status indefinitely. PRICES: All prices are subject to change without notice due to vendor price fluctuation. All orders will be invoiced at the price prevailing at the time the merchandise is shipped. The prices shown in the Darlly Filter, LLC. Price list are prevailing at the time of printing. You can confirm current prices and availability with our Customer Service or Sales Department by phone, fax or email. You can also request written quotations to be sent to you by fax, mail or email when ordering from a quote please reference the quote number. Prices on purchase orders do not constitute final invoice pricing SHIPPING: Unless otherwise specified we will determine for you the most expedient and economical means of transportation for your order. Again, unless specified, the freight terms will be prepaid on our account and appropriate charges (such as freight, insurance and handling fees) will be added to your invoice. RETURNS: Customers must obtain a Return Merchandise Authorization number before returning items. Please contact our returns department to obtain an RMA number. When calling please have the following information: the reason for return, the date of purchase, and our invoice number located on the packing slip. A restock fee of up to 25% may be applicable to your return. All returns must be received within 10 days of the issuance of the RMA number. See return policy for more details. LOSS/DAMAGE CLAIMS: Your order is filled, checked, rechecked, and packaged with great care. If damage has occurred you must keep all original packing materials and box(es). All claims for loss or damages must be placed with the carriers immediately upon receipt. We are not responsible for goods after they have been received and signed for in good condition REFUNDS: Credit will be issued upon receipt, completion and approval of return. Standard policy is to issue credit to the customer's Darlly Filter, LLC account. Purchasing product on your ATM or credit card does not guarantee automatic credit to the card. Approval from the CFO must be obtained before crediting any ATM or credit card. Authorized Signature Printed Name Title Date

Dear Customer: Below is out resale documentation. We would appreciate it if you would fill it out and return it to us as quickly as possible. As you know, we must have this card in our files in order to sell your company products without charging sales tax. If you do not have a resale number and are taxable, simply write the word TAXABLE across the form and return it to us. Please make sure all information given is legible and that your company name is included. Until this information is received and approved by our credit department, we will be forced to charge sales tax from the State of California on all orders. To avoid this, please return the information immediately. Thank you, Darlly Filter, LLC. Accounting Department FIRM NAME: ADDRESS OF FIRM: RESALE CERTIFICATE I HEREBY CERTIFY: That I hold valid seller's permit Number: issued pursuant to the Sales and Use Tax Law; that I am engaged in the business of selling: that the tangible personal property described herein which I shall purchase from DARLLY FILTER, LLC. will be resold by me in the form of tangible personal property; PROVIDED, however, that in the event any of such property is used for any purpose other than retention, demonstration, or display while holding it for sale in the regular course of business, it is understood that I am required by Sales and Use Tax Law to report and pay for the tax, measured by the purchase price of such property. Description of property to be purchased: Dated: Printed Name of Purchaser: Phone: ( ) By and Title:

2015 Industrial Catalog 14225 Telephone Avenue Unit A Chino, CA 91710 USA P: (909) 591-7999 F: (909) 591-9555 E: Sales@DarllyFilter.com Info@DarllyFilter.com www.darllyfilter.com