SVQ 2 Performing Engineering Operations at SCQF Level 5 AWarded by Excellence, Achievement & Learning Limited Accredited from 06/07/2011 to 30/06/2016 Group award number GC9W 22 Standards This SVQ is based on standards developed by SEMTA. SEMTA draws its membership from a broad range of occupations within the engineering and marine industry. Structure of the SVQ The way the SVQ is made up is shown below. The unit title appears in bold and the elements that make up each unit are listed under the unit title. Mandatory units Candidates must complete all of these units: Working Safely in an Engineering Environment (SCQF credit 5, SCQF Working safely in an engineering environment Working Efficiently and Effectively in Engineering (SCQF credit 5, SCQF Working efficiently and effectively in engineering Using and Communicating Technical Information (SCQF credit 5, SCQF Using and communicating technical information 3 Optional units (Excluding combinations - only 1 of the following units with asterisks may be included in the selection) **Producing Mechanical Engineering Drawings Using a CAD System (SCQF credit 29, SCQF Producing mechanical engineering drawings using a CAD system Producing Components Using Hand Fitting Techniques (SCQF credit 22, SCQF Producing components using hand fitting techniques Producing Mechanical Assemblies (SCQF credit 23, SCQF Producing mechanical Assemblies Forming and Assembling Pipework Systems (SCQF credit 27, SCQF Forming and assembling pipework systems
Carrying Out Aircraft Detail Fitting Activities (SCQF credit 30, SCQF Carrying out aircraft detail fitting activities Installing Aircraft mechanical Fasteners (SCQF credit 22, SCQF Installing aircraft mechanical fasteners Producing Aircraft Detail Assemblies (SCQF credit 28, SCQF Producing aircraft detail assemblies Preparing and Using Lathes for Turning Operations (SCQF credit 29, SCQF Preparing and using lathes for turing operations Preparing and Using Milling Machines (SCQF credit 28, SCQF Preparing and using milling machines Preparing and Using Grinding Machines (SCQF credit 31, SCQF Preparing and using grinding machines Preparing and Proving CNC Machine Tool Programs (SCQF credit 30, SCQF Preparing and proving CNC machine tool programs Preparing and Using CNC Turning Machines (SCQF credit 34, SCQF Preparing and using CNC turning machines Preparing and Using CNC Milling Machines (SCQF credit 34, SCQF Preparing and using CNC milling machines Preparing and Using CNC Machining Centres (SCQF credit 34, SCQF Preparing and using CNC machining centres Maintaining Mechanical Devices and Equipment (SCQF credit 31, SCQF Maintaining mechanical devices and equipment Assembling and Testing Fluid Power Systems (SCQF credit 36, SCQF Assembling and testing fluid power systems Maintaining Fluid Power Equipment (SCQF credit 36, SCQF Maintaining fluid power equipment Producing Sheet Metal Components and Assemblies (SCQF credit 25, SCQF Producing sheet metal components and assemblies Producing Platework Components and Assemblies (SCQF credit 36, SCQF Producing platework components and assemblies Cutting and Shaping Materials Using Thermal Cutting Equipment (SCQF credit 36, SCQF level Cutting and shaping materials using thermal cutting equipment Preparing and Proving CNC Fabrication Machine Tool Programs (SCQF credit 31, SCQF level
Preparing and proving CNC fabrication machine tool programs Preparing and Using CNC Fabrication Machinery (SCQF credit 34, SCQF Preparing and using CNC fabrication machinery Preparing and Using Manual Metal Arc Welding Equipment (SCQF credit 29, SCQF Preparing and using manual metal arc welding equipment Preparing and Using Manual TIG or Plasma-Arc Welding Equipment (SCQF credit 33, SCQF Preparing and using manual TIG or plasma-arc welding equipment Preparing and Using Manual MIG, MAG and Other Continuous Wire Welding Equipment (SCQF credit 34, SCQF Preparing and using manual MIG, MAG and other continuous wire welding equipment Preparing and Using Manual Gas Welding Equipment (SCQF credit 29, SCQF Preparing and using manual gas welding equipment Preparing and Using Manual Flame Brazing and Bronze Welding Equipment (SCQF credit 30, SCQF Preparing and using manual flame brazing and bronze welding equipment **Producing Electrical or Electronic Engineering Drawings Using a CAD System (SCQF credit 32, SCQF Producing electrical or electronic engineering drawings using a CAD system Wiring and Testing Electrical Equipment and Circuits (SCQF credit 32, SCQF Wiring and testing electrical equipment and circuits Forming and Assembling Electrical Cable Enclosure and Support Systems (SCQF credit 27, SCQF Forming and assembling electrical cable enclosure and support systems Assembling, Wiring and Testing Electrical Panels/Components Mounted in Enclosures (SCQF credit 31, SCQF Assembling, wiring and testing electrical panels/components mounted in enclosures Assembling and Testing Electronic Circuits (SCQF credit 32, SCQF Assembling and testing electronic circuits Maintaining Electrical Equipment/Systems (SCQF credit 34, SCQF Maintaining electrical equipment/systems Maintaining Electronic Equipment/Systems (SCQF credit 34, SCQF Maintaining electronic equipment/systems Maintaining and Testing Process Instrumentation and Control Devices (SCQF credit 32, SCQF Maintaining and testing process instrumentation and control devices Wiring and Testing Programmable Controller Based Systems (SCQF credit 33, SCQF
Wiring and testing programmable controller based systems Using Wood for Pattern, Modelmaking and Other Engineering Applications (SCQF credit 29, SCQF Using wood for pattern, modelmaking and other engineering applications Assembling Pattern, Model and Engineering Woodwork Components (SCQF credit 27, SCQF Assembling pattern, model and engineering woodwork components Producing Composite Mouldings Using Wet Lay-Up Techniques (SCQF credit 32, SCQF level Producing composite mouldings using wet lay-up techniques Producing Composite Mouldings Using Pre-Preg Laminating Techniques (SCQF credit 32, SCQF Producing composite mouldings using pre-preg laminating techniques Producing Composite Mouldings Using Resin Infusion Techniques (SCQF credit 32, SCQF Producing composite mouldings using resin infusion techniques Producing Composite Assemblies (SCQF credit 28, SCQF Producing composite assemblies Finishing Surfaces by Applying Coatings or Coverings (SCQF credit 29, SCQF Finishing surfaces by applying coatings or coverings Carrying Out Heat Treatment of Engineering Materials (SCQF credit 27, SCQF Carrying out heat treatment of engineering materials Carrying Out Hand Forging of Engineering Materials (SCQF credit 27, SCQF Carrying out hand forging of engineering materials **Producing CAD Models (Drawings) Using a CAD System (SCQF credit 33, SCQF Producing CAD models (drawings) using a CAD system There may be publications available to support this qualification. For more information, please contact: Excellence, Achievement & Learning Limited National Verification Centre 3365 Century Way Thorpe Park Leeds LS15 82B Tel: 01132 206 1188 Fax: 01132 321159 Website: www.eal.org.uk
à  Scottish Qualifications Authority 2013