August 2016 Guardian Software Update Delivery Service User Guide This user guide provides step by step instructions on how to install, configure and use the Guardian Software Update Delivery Service.
August 2016 Page 2 Contents 1 What is Guardian Software Update Delivery Service (GSUDS)?... 3 2 Minimum System Requirements... 3 2.1 Hardware... 3 2.2 Software... 3 3 Installing the GSUDS Applet... 4 4 Getting Started... 14 4.1 Download Folder Configuration... 15 4.2 Adding a User Account... 16 5 GSUDS Applet... 19 5.1 Downloads... 19 5.1.1 Test Connection... 20 5.1.2 Download List... 21 5.1.3 Download Now... 23 5.1.4 Configuring GSUDS as a Scheduled Task... 25 5.2.1 Configured Guardian Users... 29 5.2.2 Download Settings... 36 5.3 View Logs... 37 5.3.1 Installation Help Files... 38 5.3.2 Applet Logs... 40 5.4 Help/Support... 43 6 Uninstalling the GSUDS Applet... 44 7 Restoring the GSUDS Applet... 47 8 Upgrading the GSUDS Applet... 47 9 Contact Us... 48
August 2016 Page 3 1 What is Guardian Software Update Delivery Service (GSUDS)? The Guardian Software Update Delivery Service (GSUDS) feature, available to subscribers, provides an automated delivery (either on demand or scheduled) of updates specific to the enrolled system including: DeltaV and AMS Device Manager Hot Fixes Microsoft Operating System Security Updates Text file containing the filename of the latest Symantec Anti Virus Updates tested for DeltaV NOTE: Emerson does not provide its end-users with a Symantec Antivirus software license. End-users will need to purchase this license from Symantec or their authorized distributors.symantec Antivirus updates are downloaded directly from Symantec. McAfee Anti Virus patches (.DAT patch). DeltaV, AMS Device Manager and Ovation Device Install Kits HART, Fieldbus, Profibus and DeviceNet Device Install Kits The installed applet communicates and pulls update files from an Emerson server via the Internet. TIP: Look for these red check boxes throughout this guide. They identify important notes and useful tips related to maximizing the value of GSUDS. Note: Emerson does not provide its end-users with a Symantec Antivirus software license. End-users will need to purchase this license from Symantec or their authorized distributors. Note: The GSUDS applet is necessary for the successful implementation of the optional Patch Management service available for a fee through Advanced Services that allows for deployment of the said updates to the nodes across the DeltaV network. 2 Minimum System Requirements 2.1 Hardware 2.2 Software PC with 1GHz or higher processor clock speed 1GB of RAM or higher 1.5 gigabytes (GB) of available hard disk space* Super VGA (800 x 600) or higher-resolution video adapter and monitor Keyboard and Microsoft Mouse or compatible pointing device Internet connection (DSL or higher connection is recommended) * A larger disk space is required if you choose to store all your downloaded files locally. Windows 7 SP1, Windows Server 2008 SP2, Windows Server 2008 R2 SP1, Windows 10, Windows Server 2012, Windows Server 2012 R2 Windows Installer 3.1, Windows Installer 4.5 Microsoft.Net 4.5 Framework
August 2016 Page 4 3 Installing the GSUDS Applet Follow the step by step procedure (see below) on how to install the GSUDS applet: A. Download GSUDS Installer There are two locations in the website where you can download the GSUDS installer: Option 1: Software Updates Tools Figure 1 Software Updates and GSUDS Installation Download Link Option 2: Support Self Service Updates Tools Figure 2 GSUDS Installation Download Link at Support tab
August 2016 Page 5 Clicking on the Download GSUDS Applet will launch a lightbox. From the lightbox, you can download the GSUDS Applet (Setup.exe). Figure 3 GSUDS Download List Lightbox NOTE: How do you apply for a Guardian account? Refer to the User Guide located in the Resources page of your Dashboard to view the steps on how to apply for a Guardian account. Also in this document, you will find useful information about the different available features and how to keep their contents accurate and up-to-date. NOTE: Update the IE settings to enable download. 1. Include https://gsuds.emersonprocess.com in the list of Trusted Sites for your computer by going to Settings > Internet Options > Security > Trusted Sites > Sites. Figure 4 Internet Explorer Options
August 2016 Page 6 Figure 5 Internet Explorer Options>Trusted Sites 2. Enable.NET Framework and File Download options by going to Settings > Internet Options > Security > Internet > Custom level. Figure 6 Internet Explorer Options>Security
August 2016 Page 7 Make sure that the following options are enabled: Figure 7 Internet Explorer Options>Security>Enable File Download and Enable.Net Framework Setup
August 2016 Page 8 3. Disable saving of encrypted pages by going to Settings > Internet Options > Advanced. Uncheck Do not save encrypted pages to disk. Figure 8 Internet Explorer Options>Advanced B. Click on Save when you see window below (Figure 9). Figure 9 Save Setup.exe
August 2016 Page 9 C. Right-click Run as Administrator when launching Setup.exe. Figure 10 Run as Administrator D. Verify the publisher (Figure 11) by clicking the Run button again. Figure 11 Verify publisher
August 2016 Page 10 E. Read and accept the Microsoft License Agreement (Figure 12) by clicking the Accept button. Figure 12 License Agreement F. A download progress window (Figure 13) will then be shown. Figure 13 Download required files
August 2016 Page 11 G. The appearance of the.net License Agreement in Figure 12 means that the required framework is missing and will be installed automatically (Figure 14) if the user accepts the EULA. Figure 14.Net Framework installation NOTE: If running on Windows 7 SP1 32-bit or Windows Server 2008 SP2 32-bit and Windows Server 2008 SP1 64-bit, an error might be encountered after installing.net Framework 4.5 Figure 15.NET Framework Installation Error If this occurs, simply re-launch GSUDS. H. Click on Install button to begin the GSUDS application installation (Figure 15). Figure 16 Install GSUDS
August 2016 Page 12 I. A progress bar (Figure 16) will show the status of the installation process. Figure 17 GSUDS installation progress bar J. The GSUD applet runs automatically after successful installation. It can also be run by going to Start All Programs Emerson Process Management Guardian Software Update Delivery Service. Figure 18 GSUDS application
August 2016 Page 13 NOTE: An important note after downloading and Installing GSUDS: After downloading and installing GSUDS, set Internet Explorer as default browser. NOTE: IF using Windows Server 2008: When using Windows Server 2008, it is recommended to enable multiple logins to the machine to prevent download disruption in case a user logs in to the machine in the middle of the download. This can be done through the following steps: 1. To open Remote Desktop Session Host Configuration, click Start, point to Administrative Tools, point to Remote Desktop Services, and then click Remote Desktop Session Host Configuration. 2. In the Edit settings area, under General, double-click Restrict each user to a single session. 3. On the General tab of the Properties dialog box, uncheck the Restrict each user to a single session check box, and then click OK. NOTE: IF using Windows 10 Enterprise LTSB: To easily access GSUDS via Start Menu or Taskbar without searching for the application, please perform the following steps: 1. Go to Start Menu, All Apps, Emerson Process Management. 2. Right-click on Guardian Software Update Delivery. 3. Choose Pin from Start or Pin from Taskbar to pin GSUDS via Start menu or taskbar, respectively.
August 2016 Page 14 4 Getting Started Before being able to successfully download the necessary update files for your system, a couple of important tasks need to be completed. As seen in Figure 17 (also shown in Figure 18), the download folder location, where all the updates will be stored, should be identified, and a valid Guardian user should be configured. Figure 19 Prerequisites before using GSUDS NOTE: To access GSUDS from Start Menu or access from the taskbar do the following steps: 1. Go to Start Menu > All Apps > Emerson Process Management 2. Right-click on Guardian Software Update Delivery Service 3. Choose either Pin from Start to access GSUDS from the Start Menu; or Pin from taskbar to access GSUDS from the taskbar. NOTE: GSUDS support McAfee AV Patches aside from Symantec as antivirus.
August 2016 Page 15 4.1 Download Folder Configuration Choose the location where the downloaded updates will be saved by selecting the Configure button and then clicking on the Change button, located in the Download Settings option (Figure 19). Simply browse through your hard drive for your desired location, and then click OK. Figure 20 Configuring the download folder NOTE: Mapped Drives and Shared Network Folders Downloading files into mapped drives and shared network folders is not supported. Please set your download folder to any local folder of your machine.
August 2016 Page 16 4.2 Adding a User Account GSUDS will only work if valid Guardian users are configured within the applet. To do so, click on the Users button in the Configured Guardian Users tab (Figure 19), then select Add New User in the drop down selection (Figure 20). Figure 21 Add New User
August 2016 Page 17 A pop up window (Figure 21) will appear to ask for the username and password that is being used to login to the Guardian website. Figure 22 Input Guardian Username and Password Click on Add User when done. Once the credentials have been verified, a confirmation window will appear (Figure 22). Figure 23 New User Added NOTE: What will happen if the credentials are invalid? A user must have a valid Guardian account in order to use the GSUDS application. If inputs are invalid (wrong username or wrong password), the window in Figure 23 will display. If you forget your password, you may use the Forgot Password utility located in the Guardian login page. You may also contact your local Emerson office for assistance. Figure 24 Credentials invalid
August 2016 Page 18 The valid user will then appear in the list of Configured Guardian Users (Figure 24). Figure 25 Configured Guardian Users NOTE: An important note before downloading: Ensure that the PC clock is synchronized with the corresponding time zone in the PC where the applet is installed. If the clock is off by 10 minutes or more, the Emerson server will not accept the request from the applet for security reasons.
August 2016 Page 19 5 GSUDS Applet 5.1 Downloads The Downloads page is the main page of the GSUDS Applet. It will show the Installed Version, Last Download Date, Download Folder, Disk Space remaining and the number of configured users who are using the applet (Figure 26). Figure 26 Downloads Page TIP: Download Folder Location: If the download folder label has three dot ellipses (i.e. download folder location is longer than the space provided), a user can hover on the said download folder path to view the complete path. NOTE: Why is the Last Download date blank? A PC with a newly installed GSUDS applet will always reflect a blank Last Download date. A valid date will be displayed in that field if there were already previous successful downloads.
August 2016 Page 20 5.1.1 Test Connection Select the Test Connection button to check if the applet can connect to the Emerson web service. A connection status window will appear to check if connection can be established (Figure 27). Figure 27 Establishing Connection to Emerson Server An information window in Figure 28 will appear if connection is successful. Figure 28 Connection Established If connection cannot be established, a different window will inform the user of an unsuccessful connection to the Emerson server (see Figure 29). Figure 29 Connection Failed
August 2016 Page 21 5.1.2 Download List Select the Download List button (Figure 26) to view all the updates that are not yet downloaded and are currently matched to your DeltaV systems and devices based on the latest registration file uploaded to Emerson. If the window in Figure 30 appears after clicking the Download List button, there are no configured users in GSUDS that are identified contacts of any system. Figure 30 Configured users are not system contacts NOTE: An important note before downloading: Downloading using the GSUDS applet can only be done if there is at least one configured user who is an identified contact of a DeltaV system. This contact can be a Software Contact, Safety Contact, Engineering Contact, Engineering SIS Contact, Other Contact, etc. To check the systems where a configured Guardian user is associated to, proceed to section 5.2.1 of this User Guide. If the correct users are already configured in GSUDS, the list of updates can now be downloaded (Figure 31). Figure 31 Applet retrieving list of matched updates Once all updates have been received, a separate window, shown in Figure 31, will display all the necessary updates for the system. The types of updates are separated by tabs located in the upper part of the window.
August 2016 Page 22 Figure 32 Download list window NOTE: Selection of downloadable updates The user can select the updates you want to download by going to the Configure tab and selecting the Requested Updates drop down list. See Figure 32.
August 2016 Page 23 5.1.3 Download Now Select the Download Now link (Figure 26) to download all the updates from the download list. A snapshot of the download window is shown in Figure 33. Figure 33 Downloadable updates selection NOTE: Important note on downloading: It may take quite a while for the download to finish if run for the first time. The reason for this is because the download list is being compared to the contents of the download folders in your hard drive, which at this point, are empty. The difference of actual downloaded files and metadata is that actual downloaded files are those that will be installed in the system while the metadata contain information needed by automated Patch Management to determine which of these files will go to which node/workstation.
August 2016 Page 24 Figure 34 Downloading status window NOTE: Important note on failed downloads: A user may encounter failures in downloading some updates due to several unavoidable reasons, such as slow internet connection, server contention, etc., which the GSUDS applet cannot control. The user just needs to click on the Download Now button again to get these failed updates. ONLY those that failed will be downloaded since the download folders already contain the updates that were successfully downloaded by the applet. Once the download is complete, the files downloaded will be in the download folder specified in the Configure page. The GSUDS applet also creates subfolders (Figure 35) in the download folder necessary to easily manage and separate the downloaded files. Figure 35 Subfolders
August 2016 Page 25 TIP: Scheduling Downloads For Windows 2008 and Windows 7, the GSUDS can be scheduled by going to Start Programs Accessories System Tools Task Scheduler. 5.1.4 Configuring GSUDS as a Scheduled Task A. Upon installation of GSUDS ver. 6, a pre-defined scheduled task will be created for automated GSUDS run. o o o General Tab Task Name: Emerson GSUDS Author: {Current User} Description: Launches GSUDS in silent mode and downloads configured software updates. Security Options Triggers Tab Trigger One time When running the task, use the following user account: {Current User} Run only when user is logged on is selected Details {trigger will start after 24 hours from the time GSUDS was installed} Status Disabled Actions Tab Action Start a program Figure 36 GSUDS Scheduler Properties Details {path to GSUDS.bat}
August 2016 Page 26 B. The user needs to Enable the trigger set in the scheduled task in order for it to execute. Figure 37 GSUDS Scheduler Properties: Trigger Tab Figure 38 GSUDS Scheduler Properties: Pre-configured Trigger Settings
August 2016 Page 27 C. In order to make the scheduled task run when the user is logged-off, you need to set the ff. o General Tab o Security Options Select Run whether user is logged on or not Check Run with highest privileges Upon clicking OK, you will be asked to enter your password Figure 39 Enable GSUDS Automated Run Even If User is Logged-Off D. GSUDS.bat will be installed in the current user s My Documents folder: o Ex. C:\Users\{Current User}\My Documents\Emerson GSUDS\ E. Aside from GSUDS.bat, RunGSUDS.exe will also be installed in the My Documents folder. This will be called by GSUDS.bat and will be used for silent download in Windows Server 2012 when the user is logged-off o Clicking RunGSUDS.exe will just open the GSUDS application NOTE: There should only be one scheduled task for running automated download via GSUDS
August 2016 Page 28 In addition, please make sure that https://gsuds.emersonprocess.com is included in the list of Trusted Sites for your computer. To validate this, go to Control Panel and click on Internet Options. Go to the Security tab of the window as shown on figure 36. Figure 40 Internet Options Please make sure that the schedule for GSUDS download does not conflict with other scheduled tasks. Ensure that only the GSUDS task will run during the specified schedule.
August 2016 Page 29 NOTE: Applet behavior when the auto-download scheduling is enabled: If the downloading of updates is automatically scheduled (via Windows Task Scheduler), the following behaviors are expected from the applet: 1. The applet is placed in the system tray (see Figure 41) and closes itself after the download (that is if still in the system tray after the download finishes). Figure 41 GSUDS applet in the system tray 2. If the applet is idle and in the system tray when the auto-download is triggered, the applet will proceed with the autodownload. 3. If the applet is idle and NOT in the system tray (meaning, the GSUDS window in figure 18 is open), NO autodownloads will be done unless you select the Download Now button. 4. When GSUDS' task scheduler is configured as "run whether user is logged on or not", it will not be visible in the system tray if the scheduled task executes. If Run user when logged on is selected, GSUDS will show only on the system tray. 5.2 Configure The Configure page is where you can configure the Guardian users who will use the applet and the location where the downloaded files will be placed. 5.2.1 Configured Guardian Users As seen in Figure 42, the Users drop down list shows the options used to configure GSUDS users: Figure 42 Configure Guardian Users
August 2016 Page 30 Add New User: See section 4.2 of this User Guide Edit Selected User: Click Edit Selected User to change the login credentials of the selected user in the list. Doing so will open a popup window (Figure 43), which will ask for the new email address and the user s corresponding Guardian password. Click on Update when done. Figure 43 Edit email address NOTE: Configured Guardian Users The login credentials, (username and password) used in the Guardian website and the GSUDS applet must match. If they are changed in Guardian, they should also be changed in GSUDS by selecting the Edit button. Failure to do so will result to possible errors during download.
August 2016 Page 31 Remove Selected User: Click Remove Selected User to delete the email address from the list of Configured Guardian Users. View Systems: Click View Systems to see the system IDs the highlighted email address is associated with, i.e. user with the email address is a named contact of the system ID. See Figure 44. Figure 44 Systems associated with email address NOTE: System selection for GSUDS The systems shown in Figure 44 are the systems where the selected user is an identified contact. The user can choose to download all updates either for all systems or for several systems by placing checkmarks on the appropriate systems. Make sure that the Save Settings button is clicked. Refresh: Click Refresh if there are changes made to the profile of the email addresses in the list, such as the user being added as a Safety Contact for a system ID. It is advised that the Refresh be used after such changes, so the application can revalidate and refresh the account information within GSUDS (Figure 45). Once all information has been revalidated, a confirmation window will appear, as seen in Figure 46.
August 2016 Page 32 Figure 45 Refresh Guardian user credentials Figure 46 Credentials confirmation Proxy User: Click Proxy User for setting up the GSUDS applet to be used for downloading updates behind a proxy server. Tick on the Enable proxy credentials in Figure 47 and provide the username and password. Figure 47 Enter proxy credentials NOTE: Using the Proxy Settings To check whether a proxy server is required for internet access, open the Internet Options window (Figure 48) in Internet Explorer by clicking on Tools Internet Options.
August 2016 Page 33 Figure 48 Internet Options
August 2016 Page 34 Choose the Connections tab and click on the LAN settings button in Figure 49. Figure 49 Internet Options Connections tab
August 2016 Page 35 The LAN Settings configuration window (Figure 50) will be displayed. A checkmark on the Use a proxy server for your LAN means that the internet connection uses a proxy server specified in the Address and Port fields. Figure 50 LAN Settings window NOTE: GSUDS Proxy credentials vs. IE Proxy server The GSUDS Proxy credentials in Figure 47 MUST be enabled if the Internet Explorer Proxy server in Figure 50 is enabled.
August 2016 Page 36 5.2.2 Download Settings As mentioned in Section 4.1, it is a requirement to define the hard drive location where files will be downloaded before being able to successfully download updates. As covered in Section 5.1.2, the user can select the updates he/she want to download by going to the Configure tab and selecting the Requested Updates drop down list (Figure 51). Figure 51 Download and Update Settings
August 2016 Page 37 5.3 View Logs The View Logs page is where the Installation Help files and the Applet Log files can be downloaded and viewed (Figure 52). Figure 52 View Logs page
August 2016 Page 38 5.3.1 Installation Help Files NOTE: Important note on installation help files. The hotfixes and updates must be already downloaded to your hard drive because they are being used to generate such files. The user can choose any of the update types to view its respective installation help file. See Figure 53. By clicking on the View File button, the user can find all the information necessary to properly install the downloaded files to the respective nodes. Figure 53 Different Installation Help files
August 2016 Page 39 NOTE: Add GSUDS as a trusted site. If running on Windows 2008 and the security window (see Figure 54) appears during the generation of the installation help file, click on Add to include GSUDS as a trusted site. Figure 54 Add GSUDS as a trusted site TIP: Getting a copy of the installation file. A hard copy can be obtained by clicking on the Print link located at the upper right hand corner of the installation help file window. A soft copy can also be saved on the hard drive by selecting the Save to file link (htm format). NOTE: Downloading Symantec antivirus definition files: Updates for Symantec Antivirus pattern files are downloaded directly from Symantec using the LiveUpdate Administrator (LUA). Emerson does not provide these antivirus update files. These files undergo compatibility checks performed by Emerson once a month. Please note that the GSUDS applet only provides a text file that identifies the latest Emerson approved Symantec Antivirus pattern files. These text files are used to download the correct anti-virus updates from Symantec. NOTE: About Symantec Antivirus Software licenses: Emerson does not provide its end-users with a Symantec Antivirus software license. End-users will need to purchase this license from Symantec or their authorized distributors.
August 2016 Page 40 5.3.2 Applet Logs The GSUDS applet provides two types of logs: Activity Logs and Error Logs, and these logs are different from one installed applet to another. The Activity Logs in Figure 55 let the user view the recent activities that were generated in the application. Such activities include validation of configured users, update files download status, change in applet configuration, etc. Figure 55 Activity Logs
August 2016 Page 41 The Error Logs show a list of the errors encountered in the applet, such as failure to get help files, failure to connect to an Emerson server, etc. See Figure 56. Figure 56 Error Logs TIP: Saving updates list. Click on the Save to file button shown in Figure 55 and Figure 56 if you wish to save the list in an XML file. Select the location where the file will be saved, provide a file name then click on Save. See Figure 57.
August 2016 Page 42 NOTE: Failed Downloads: As previously stated in Section 5.1.3., failures may be encountered in downloading some updates due to several uncontrollable reasons. If a user checks these error logs and sees downloading failures, it is suggested to click on the Download Now button again to ensure that all updates are indeed downloaded. Figure 57 Saving the updates list The user may choose to archive these log files on the hard drive by selecting the Purge Logs button in the View Logs window, as shown in Figure 58. This will also clean up the download folders of unnecessary update files. Figure 58 Purge Logs
August 2016 Page 43 5.4 Help/Support The Help/Support window, shown in Figure 59, provides information on where to get support for the GSUDS applet. There is a link to the Guardian Dashboard website as well as the SureService website for the user s convenience. A copy of this User Guide document can also be downloaded or viewed by selecting the User Guide button provided. Figure 59 Help/Support Page
August 2016 Page 44 6 Uninstalling the GSUDS Applet As with any other Windows program, the GSUDS applet can be uninstalled using the Add or Remove Programs (see Figure 60) or Programs and Features (for Windows 7 and above Figure 61) in the Control Panel. Figure 60 Add or Remove Programs
August 2016 Page 45 Figure 61 Programs and Features Once the utility finishes populating the list of installed programs in the PC, scroll down until the Guardian Software Update Delivery Service program is displayed. Select the application then click on the Change/Remove button. See Figure 61. For Windows 7 and above, right-click on the Guardian Software Update Delivery Service program, and select Uninstall/Change
August 2016 Page 46 Figure 62 Select GSUDS from the list Select Remove the application from this computer option in Figure 62 then click on OK. Figure 63 Remove GSUDS Follow the on-screen instructions in Windows until the GSUDS applet has been successfully uninstalled.
August 2016 Page 47 7 Restoring the GSUDS Applet Restoring the applet to a previously installed version may be necessary if you are encountering problems with the version currently installed on the PC. This can be done by selecting the Restore the application to its previous state shown in Figure 63. This option is not available if the applet is newly installed. It is only possible if the applet has been upgraded at least once. 8 Upgrading the GSUDS Applet If applet is closed and is started from the Start Menu and a new version is detected by GSUDS, a user will be able to see a window similar to Figure 65. NOTE: Upgrading GSUDS For GSUDS version 5.0 and below, the applet would need to be uninstalled first before upgrading. Please make sure that you are at GSUDS version 6.0.0.0 version and above to enjoy automatic GSUDS version upgrade. GSUDS can be configured to automatically update or not. If automatic update is set, GSUDS is automatically upgraded to the latest version. If automatic update is not set, user is presented with the Changelog and option to Update Now or Update Later. All updates are necessary; which means doing an Update Later makes GSUDS unusable. NOTE: Upgrading GSUDS It is highly recommended to click on Update Now as seen in Figure 65 to upgrade the GSUDS Applet. Figure 64 GSUDS Update available After clicking Update Now, GSUDS will update then a pop-up message will be displayed. Figure 65 GSUDS Update available For changes to take effect, click OK. GSUDS is restarted and upgraded to the latest version.
August 2016 Page 48 9 Contact Us Emerson has developed a global service organization of certified facilities and personnel to ensure that we deliver the highest quality service to our customers. For more information on the GSUDS applet or for concerns, comments or suggestions about the service, we encourage you to contact your local Emerson service provider. You can find contact information for your local service provider at: http://www.emersonprocess.com/systems/reach/. Legal Disclaimer: The urgency and severity ratings of this notification are not tailored to individual users; users may value notifications differently based upon their system or network configurations and circumstances. The System Health Score presented in the Guardian dashboard website indicates the performance of the system based upon a comparison of identified risk area management relative to other systems subscribed to worldwide. The Guardian System Health Score considers only what is known to Emerson relative to a limited collection of risk factors (e.g. Knowledge Base Articles, uninstalled hotfixes, etc.) with no consideration of the processes under control, the application/configuration of that system, or the actual actions taken locally to mitigate the identified risks. A high System Health Score is a recognition of the efforts taken to mitigate these particular risks Guardian is capable of identifying, but in no way guarantees, or implies, that the operation of the system is risk free in any way. THIS NOTIFICATION, AND INFORMATION CONTAINED HEREIN, IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. THE USE OF THIS NOTIFICATION, AND INFORMATION CONTAINED HEREIN, OR MATERIALS LINKED FROM THIS NOTIFICATION, IS AT YOUR OWN RISK. EMERSON RESERVES THE RIGHT TO CHANGE OR UPDATE NOTIFICATIONS AT ANY TIME. To locate a sales office near you, visit our website at: www.emersonprocess.com/deltav Or call us at: Asia Pacific: 65.777.8211 Europe, Middle East: 41.41.768.6111 North America, Latin America: +1 800.833.8314 or +1 512.832.3774 For large power, water, and wastewater applications contact Power and Water Solutions at: www.emersonprocess-powerwater.com Or call us at: Asia Pacific: 65.777.8211 Europe, Middle East, Africa: 48.22.630.2443 North America, Latin America: +1 412.963.4000 Emerson Process Management 2016. All rights reserved. For Emerson Process Management trademarks and service marks, go to: http://www.emersonprocess.com/home/news/resources/marks.pdf. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warrantees or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the design or specification of such products at any time without notice.