INTRODUCTION: The wind/solar hybrid controller is control device which can control wind turbine and solar panel at the same time and transform wind and solar energy into electricity then store to the battery bank. Wind/solar hybrid controller is the most important part in off grid system, whose performance has much effect on life expectancy and operational stability of the whole system, especially the battery expectancy. Or life span of battery will be shortened by over charge or over discharge. PERFORMANCE FEATURES: Superior military grade components to ensure the product stability. Perfect protection function, thus the system has higher reliability. Check and set all operation parameters as requirement from LCD display. Voltage limiting and current limiting charge mode ensures battery in the best charging status. PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status. QUALIFICATIONS: Utility model patent of anti strong wind, stepless unload wind power controller Utility model patent of wind power boost charge circuit. Utility model patent for integration of rectification and unload in wind power main circuit board. European CE certification. Software product register certification OPTIONAL FUNCTIONS: Temperature compensation function: the controller can automatically adjust dumpload voltage according to different external environment temperature, which ensures battery charge efficiently. Wind turbine low voltage charge function: the controller can charge battery when wind turbine is in low rotate speed status, which can make full use of low wind power. RS communication function: RS232/RS485/RJ45/GPRS are optional communication ports. Output dry contact signal function: the controller can output dry contact signal (e.g.: start diesel engine, gasoline engine signal). SD card function: with SD card, controller can store system history data when it is disconnected with PC. Wind speed detection function: the controller can detect real time wind speed; the real time wind speed value will be displayed via monitoring software. Wind turbine rotate speed detection function: the controller can detect real time wind turbine rotate, the real time
wind turbine rotate speed value will be displayed via monitoring software. Wind turbine micro current charge function: when the wind turbine input DC voltage reach to the pre set value, the controller will produce small current charge battery. OPTIONAL ACCESSORIES: Ethernet communication module GPRS communication module SD card storage RS485 USB converter RS485 RS232 converter RS232 USB converter PRODUCT DISPLAY:
MODEL SPECIFICATION: Product Name Wind and WWS Solar Hybrid Rated Input Rated Battery DC Optional Function Feature Power Voltage Output DC 06 0.6 kw 24 24V N Advanced 00 Normal D Output 10 1kW 48 48V L 20 2kW 96 96V D Low Voltage Buck Voltage 01 RS232 02 RS485 30 3kW 120 120V B Economy 04 Solar Dumpload Separately 50 5kW 220 220V S Micro Current 10 Wind Turbine 100 10kW 240 240V 11 Wind urbine Single Phase DC,RS232 200 20kW 12 XX Wind urbine Single Phase DC,RS485 Other E.g.: WWS20 48 L01 indicates rated wind turbine input power 2Kw, rated battery voltage 48V, with low voltage charge optional function and RS232 communication optional function.
APPLICATION AREAS: Stand alone wind/solar hybrid power station. Stand alone domestic household wind/solar hybrid power system. Mobile communication base stations, expressway and other non residential regions. Coastal islands, remote mountainous, border posts for regions shortage of or without electricity. Government demonstration projects, landscape lighting project. HELPFUL HINTS: Customers, who will order the wind/solar hybrid controller, need to provide the following information: Rated battery bank voltage Rated solar power Rated wind turbine output power Whether the wind turbine is three phase AC output, single phase DC output or single phase AC output TECHNICAL PARAMETERS: Product Model Rated Battery Voltage Rated Wind Turbine Input Power Maximum Wind Turbine Input Power Wind Turbine Brake Current Rated Solar Input Power Floating Charging Voltage Display Mode Quiescent Current WWS10 48 48V 1kW 1.5kW 21A 300W 58V LCD 20mA Ambient Temperature & Humidity 20~+55 /35 ~85%RH(Without Condensation) Communication Mode (Optional) Temperature Compensation Function (Optional) Dimension(L x W x H) Net Weight RS232 RS485 RJ45 GPRS (optional) 4mV/ /2V, 35 +80,Precision:±1 440 425 170mm 11kg Data for Low Voltage Function Wind Turbine Start Voltage 8V
Input Admittance Value 10/60 Dimension (L x W x H) Net Weight Controller Box: 440 305 170mm Dump load Box: 300 190 120mm Controller: 7.5kg ; Dump load Box: 3.5kg In order to serve our customers better. Our company can adjust parameters configuration according to customer s requirement. Declare: Our company reserves the right to change products. Design and specification are subject to change without prior notice.