60Hz VERTICAL MULTISTAGE PUMPS EV

6Hz VERTICAL MULTISTAGE PUMPS EV 1-3 - 6-1 - 15-2 - 3-45 - 65-95

INDEX EV Series Vertical Multistage Pumps Overview............... 2 General Product Curves................................. 3 Table of hydraulic performances at 6Hz - EV 1-3............ 4 Material Table......................................... 5 Table of hydraulic performances at 6Hz - EV 6-1........... 6 Material Table......................................... 7 Table of hydraulic performances at 6Hz - EV 15-2.......... 8 Material Table......................................... 9 Table of hydraulic performances at 6Hz - EV 3-45.......... 1 Material Table......................................... 11 Table of hydraulic performances at 6Hz - EV 65-95.......... 12 Material Table......................................... 13 Motors - AEG.......................................... 14 Mechanical seal specifi cations............................ 16 Performance Curves and Technical Data 6Hz EV 1.............................................. 19 EV 3.............................................. 25 EV 6.............................................. 31 EV 1.............................................. 37 EV 15.............................................. 43 EV 2.............................................. 47 EV 3.............................................. 51 EV 45.............................................. 55 EV 65.............................................. 59 EV 95.............................................. 63 Pump Section and List of Main Components................. 67 Dimensions of counterfl anges............................. 74 1/76

EV Series 1-3 - 6-1 - 15-2 - 3-45 - 65-95 Vertical Multistage Centrifugal Pumps APPLICATIONS Boiler feed Circulation of hot and cold water for heating, cooling and conditioning systems Handling of water, free of suspended solids, in the civil, industrial and agricultural sector Irrigation systems Pressure boosting and water supply systems Wash down unit Water treatment plants FEATURES Full stainless steel in contact with water (inox version), compact and solid structure Diffuser bushing made of graphite for durability against dry running (EV 3-45-65-95) Easy disassembly without any special tool Easy installation in-line ports Fabricated stainless steel impeller and diffuser for corrosion resistance and superior effi ciency New hydraulic design for the highest efficiency Oversize ball bearing (bearing bracket) ensures motor-bearing long life and eliminates axial and other adjustments of moving parts WRAS certifi ed PPS (EV 1-3-6-1) / PTFE (EV 15-2-3-45-65-95) replacement fl oating neck ring for cost effective maintenance and longlasting performance Removal of the mechanical seal without dismounting the pump; for models higher than 4kW no need to remove the motor Replaceable stainless steel wear ring in the neck of the impeller (EV 3-45-65-95) Shaft bearing and journal sleeve made of tungsten carbide Standard mechanical seal (EN 12756 ex DIN 2496) WRAS certifi ed; balanced version for EV 3-45-65-95 Standard IE3 motor without oversize bearing, size B14 up to 4kW / size B5 from 5.5kW and above Tungsten carbide intermediate bearing to control and eliminate vibration and stabilize the rotor with a large number of stages SPECIFICATIONS Capacities up to 14 m 3 /h Head up to 284 m Direction of rotation: clockwise looking at the pump from the top down Discharge and Suction port: Oval, Round fl anges, Victaulic and Clamp connections Hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B Liquid temperature range: from -15 C to +12 C Materials: suitable for handling potable water (materials approved WRAS, ACS, KTW) Maximum working pressure: Oval fl ange 16 Bar; Round Flange, Victaulic and Clamp connections 25 Bar Motor powers from,37 to 45kW AVAILABLE ON REQUEST AISI 34 version for models 3-45-65-95 Special materials for the mechanical seal, gaskets and elastomers Balanced mechanical seal EN 12756 for EV 1-3-6-1-15-2 Oval counter fl anges (EV 1-3-6-1-15-2) Round counter fl anges 2/76

m 4 3 2 1 8 6 5 4 3 2 1 8 6 5 4 3 U.S. gpm 4 5 6 8 1 2 3 4 5 6 8 1 2 3 4 5 6 8.7.8.9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 (m 3 /h) EV 1 EV 3 EV 6 EV 1 EV 15 EV 2 EV 3 EV 45 EV 65 6 Hz EV 95 ft 1 8 6 5 4 3 2 1 8 6 5 4 3 2 1 11415 1/215 ex. PUMP IDENTIFICATION CODE / EV 3 15-1A F G 15 6 T B E1 IE3 ELP 4/69 Tensione motore ELP (elettropompa); PMP (solo pompa) Motor efficiency Mechanical seal type (see page 16) If empty std mech seal, "B" if balanced T (three-phase); M (single-phase) n of poles of the motors: if empty is 2 Frequency: if empty 5Hz; "6" for 6Hz Motor power (kwx1) Material: G (cast iron); I (AISI34); N (AISI316) Flanges: F (round); T (oval); V (victaulic); C (clamp) Number-type of trimmed impellers Number of stages Nominal flow in m3/h Pumps model 11228_BN 1/215 Versions Pump body/hydraulics EV 1 EV 3 EV 6 EV 1 EV 15 EV 2 EV 3 EV 45 EV 65 EV 95 I AISI 34 / AISI 34 G CAST IRON / AISI 34 N AISI 316 / AISI 316 = Std version = Available on request Maximum working pressure Models EV 1 EV 3 EV 6 EV 1 EV 15 EV 2 EV 3 EV 45 EV 65 EV 95 bar bar bar bar bar bar bar bar bar bar T version 16 16 16 16 16 16 F,V and C version 26 26 26 26 26 26 F version (PN16) 16 16 16 16 F version (PN25/4) 32 32 25 25 Maximum inlet pressure (H1) refer to the tables of hydraulic performances The Inlet pressure of the pump plus the pressure inside the pump cannot exceed the maximun working pressure. 3/76

EV 1-3 TABLE OF HYDRAULIC PERFORMANCES AT 6Hz PUMP TYPE RATED POWER Q = DELIVERY H1 l/min 8,3 16,7 25, 33,3 42 5, 58,3 67 75, 83,3 92 1, 18,3 117 125, 133,3 142 15 158 166,7 183 2, 216,7 233 25 267 283,3 Bar m³/h,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 1 11 12 13 14 15 16 17 kw HP H = TOTAL HEAD METERS COLUMN OF WATER EV1/2,37,5 2 19,5 19 18 16,5 15 12,5 1 6,5 EV1/3,37,5 2 29 28 26,5 24,5 21,5 18 14 9 EV1/4,37,5 2 38,5 37 34,5 31,5 28 23,5 17,5 11 EV1/5,55,75 2 49 47 44 4,5 35,5 3 23 14,5 EV1/6,55,75 2 58 55,5 52 47,5 41,5 34,5 26 16 EV1/7,75 1 2 7,5 68 64,5 59,5 53 45 35 23 EV1/8,75 1 2 8 77,5 73 67 59,5 5,5 39 26 EV1/9 1,1 1,5 2 91 88 83,5 77 69 58,5 46 31 EV1/1 1,1 1,5 2 11 97,5 92,5 85 76 64,5 5,5 33,5 EV1/11 1,1 1,5 2 11,5 17 11 93 83 7,5 55 36,5 EV1/12 1,1 1,5 2 12 116 19,5 11 9 76 59 39 EV1/13 1,5 2 2 132 127,5 121 112 1 85 67 45 EV1/14 1,5 2 2 141,5 137 129,5 12 17 91 71,5 47,5 EV1/15 1,5 2 2 151,5 146,5 138,5 128 114 97 76 5,5 EV1/17 2,2 3 2 173 168 159,5 147,5 132 113 89 6 EV1/19 2,2 3 2 193 187 177 164 147 125 98,5 66 EV1/22 2,2 3 2 222,5 215,5 24 188,5 168 143 112 75 EV1/25 3 4 2 256 248 236 219 196,5 168 132,5 9 EV3/2,37,5 2 21 21 2,5 2 19,5 18,5 17,5 16 14,5 12,5 1 7,5 4,5 2 EV3/3,55,75 2 32 31,5 31 3 29 27,5 26 24 21,5 18,5 15 11 7 3 EV3/4,55,75 2 42 41,5 4,5 39 37,5 35,5 33 3,5 27 23 18 13 8 2,5 EV3/5,75 1 2 54 54 53 51,5 5 47,5 45 41,5 37,5 32,5 27 2,5 13,5 6,5 EV3/6 1,1 1,5 2 65,5 65 64 62,5 6,5 58 55 51 46,5 4,5 33,5 25,5 17,5 9 EV3/7 1,1 1,5 2 76 75,5 74,5 72,5 7 67 63,5 59 53 46,5 38 29 19,5 9,5 EV3/8 1,5 2 2 87,5 87 86 84 81,5 78 74 69 62,5 54,5 45,5 35 24 12,5 EV3/9 1,5 2 2 98,5 97,5 96,5 94 91 87,5 82,5 76,5 69,5 61 5,5 38,5 26 13,5 EV3/1 1,5 2 2 19 18 16,5 14 1,5 96,5 91 84,5 76,5 66,5 55 42 28 14 EV3/11 2,2 3 2 121 12,5 118,5 116 112,5 18 12,5 95,5 86,5 76 63,5 49 33,5 18 EV3/12 2,2 3 2 131,5 131 129 126,5 122,5 117,5 111,5 13,5 94 82,5 68,5 52,5 36 19 EV3/13 2,2 3 2 142,5 141,5 139,5 136,5 132 126,5 12 111,5 11 88,5 73,5 56,5 38,5 2 EV3/14 2,2 3 2 153 152 15 146,5 142 136 128,5 119,5 18 94,5 78,5 6 4,5 21 EV3/15 3 4 2 165,5 165 163 159,5 155 149 141,5 132 12 16 88,5 69 48 26,5 EV3/16 3 4 2 176,5 176 173,5 17 165 158,5 15,5 14,5 127,5 112,5 94 73 5,5 28 EV3/17 3 4 2 187,5 186,5 184 18,5 175 168 159,5 148,5 135 119 99 77 53 29 EV3/18 3 4 2 198 197,5 194,5 19,5 185 177,5 168,5 157 142,5 125 14,5 81 55,5 3 EV3/19 3 4 2 29 28 25 21 195 187 177 165 15 131,5 19,5 84,5 58 31,5 EV3/21 4 5,5 2 232 231,5 228,5 224 218 29,5 199 186 169,5 149,5 125 97,5 68 38 EV3/23 4 5,5 2 254 253 25 245 238 229 217,5 23 184,5 162,5 136 16 73,5 41 4/76

EV 1-3 MATERIAL IN CONTACT WITH THE LIQUID Pos. PARTS DESCRIPTIONS MATERIAL I version N version Type ASTM/AISI DIN / EN ASTM/AISI DIN / EN 1. Pump casing Stainless Steel CF 8 / AISI 34 1.438 CF 8M / AISI 316 1.448 1.2 Filling and draining plug Stainless Steel AISI 34 1.431 AISI 316 1.441 1.6 Upper flange Stainless Steel AISI 34 1.431 AISI 316 1.441 2. Outer Case Stainless Steel AISI 34 1.431 AISI 316 1.441 2.1 Mechanical seal housing Stainless Steel AISI 34 1.431 AISI 316 1.441 2.5 Filling plugs Stainless Steel AISI 34 1.431 AISI 316 1.441 3. Pump shaft Stainless Steel AISI 34 1.431 AISI 316 1.441 3.1 Kit Mechanical seal Silicon Carbide SiC, Graphite, EPDM, Stainless Steel - - - - 3.2 Mechanical seal fastening kit Stainless Steel AISI 34 1.431 AISI 316 1.441 3.3 Kit O-rings EPDM - - - - 4. Stage housing and diffuser Stainless Steel AISI 34 1.431 AISI 316 1.441 4.1 Stage Centering outlet Stainless Steel AISI 34 1.431 AISI 316 1.441 4.2 Floating neck ring PPS - - - - 4.3 Initial stage housing Stainless Steel AISI 34 1.431 AISI 316 1.441 4.4 Last Stage with diffuser Stainless Steel AISI 34 1.431 AISI 316 1.441 4.5 Stage Centering inlet Stainless Steel AISI 34 1.431 AISI 316 1.441 4.6 Stage housing and diffuser with bearing Stainless Steel / Tungsten Carbide AISI 34 1.431 AISI 316 1.441 5. Impeller Stainless Steel AISI 34 1.431 AISI 316 1.441 5.1 Impeller spacer Stainless Steel AISI 34 1.431 AISI 316 1.441 5.2 Intermediary sleeve Tungsten Carbide - - - - 5.3 Intermediary sleeve spacer Stainless Steel AISI 34 1.431 AISI 316 1.441 5/76

EV 6-1 TABLE OF HYDRAULIC PERFORMANCES AT 6Hz PUMP TYPE RATED POWER Q = DELIVERY H1 l/min 8,3 16,7 25, 33,3 42 5, 58,3 67 75, 83,3 92 1, 18,3 117 125, 133,3 142 15 158 166,7 183 2, 216,7 233 25 267 283,3 Bar m³/h,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 1 11 12 13 14 15 16 17 kw HP H = TOTAL HEAD METERS COLUMN OF WATER EV6/2,55,75 2 21,5 21 21 21 2,5 2 19,5 19 18,5 17,5 17 16 15,5 14,5 14 13 11,5 1,5 9 7,5 5,5 EV6/3,75 1 2 32,5 32,5 32 32 31,5 31 3,5 29,5 28,5 27,5 26,5 25,5 24,5 23,5 22 2,5 19 17 14,5 12 1 EV6/4 1,1 1,5 2 43,5 43,5 43 43 42,5 42 41 4 38,5 37 36 34,5 33 31,5 29,5 28 25,5 23 2 16,5 13,5 EV6/5 1,1 1,5 2 54 54 53,5 53 52,5 51,5 5,5 49 47,5 46 44 42 4,5 38,5 36,5 34 31 27,5 24 2 16 EV6/6 1,5 2 2 65,5 65 65 64,5 64 63 61,5 59,5 58 56 54 51,5 49,5 47 44,5 42 38 34 3 25 2 EV6/7 1,5 2 2 76 75,5 75 75 74 72,5 71 69 67 64,5 62 59,5 57 54 51,5 48 43,5 39 34 28,5 23 EV6/8 2,2 3 2 87,5 87 87 86,5 85,5 84,5 82,5 8,5 78 75 72,5 69,5 67 63,5 6,5 56,5 52 46,5 4,5 34,5 28 EV6/9 2,2 3 2 98 97,5 97,5 97 96 94,5 92 9 87 84 81 77,5 74,5 71 67 63 57,5 51,5 45 38 3,5 EV6/1 2,2 3 2 19 18 17,5 17 16 14,5 12 99 96 92,5 89,5 85,5 82 78 74 69 63 56,5 49,5 41,5 33,5 EV6/11 3 4 2 121 12,5 12 12 119 117 114,5 111,5 18,5 15 11 97 93 89 84,5 79 72,5 65,5 57,5 49 39,5 EV6/12 3 4 2 132 131 131 13,5 129,5 127,5 124,5 121,5 117,5 114 11 15,5 11 96,5 91,5 86 79 71 62 52,5 42,5 EV6/13 3 4 2 142,5 142 141,5 141 139,5 137,5 134,5 131 127 123 118,5 114 19 14 98,5 92,5 84,5 76 66,5 56,5 45,5 EV6/14 3 4 2 154 154,5 154 152 15 147 144 14,5 136,5 132,5 128 123,5 118 112 15,5 98 9 81 71 6 48,5 EV6/15 4 5,5 2 165,5 166,5 166 164,5 162,5 159,5 156 152,5 149 144,5 14 135 129,5 123 116 18 99,5 89,5 79 67,5 55 EV6/16 4 5,5 2 176,5 177,5 177 175,5 173 17 166,5 162,5 158,5 154 149 143,5 137,5 131 123,5 115 15,5 95 83,5 71,5 58,5 EV6/17 4 5,5 2 187,5 188,5 188 186 183,5 18 176,5 172,5 168 163 158 152 145,5 138,5 13,5 121,5 111,5 1,5 88,5 75,5 61,5 EV6/18 4 5,5 2 198,5 199,5 198,5 197 194 19,5 186,5 182 177,5 172 166,5 16,5 153,5 146 137,5 128 117,5 16 93 79 64,5 EV6/19 5,5 7,5 2 21,5 211,5 211 29 26 22 198 193,5 188,5 183 177,5 171 164 156 147 137 126 113,5 1 85,5 7 EV6/2 5,5 7,5 2 221,5 222,5 221,5 219,5 216,5 212,5 28 23,5 198 192,5 186,5 179,5 172 164 154,5 144 132 119 15 89,5 73 EV6/21 5,5 7,5 2 232 233,5 232,5 23 227 223 218 213 27,5 21,5 195 188 18,5 171,5 161,5 15,5 138,5 124,5 19,5 93,5 76,5 EV6/23 5,5 7,5 2 254 255 254 251,5 248 243,5 238 232,5 226,5 22 213 25 196,5 187 176 164 15,5 135,5 119 11,5 82,5 EV1/2 1,1 1,5 2 28,5 28,5 28,5 28,5 28,5 28,5 28,5 28,5 28,5 28 28 28 27,5 27,5 27 26,5 26 26 25,5 25 24,5 23,5 22 2,5 19 17 15,5 13 EV1/3 2,2 3 2 43,5 43,5 43,5 43,5 43,5 43,5 43,5 43,5 43,5 43 43 42,5 42,5 42 41,5 41 4,5 4 39 38,5 38 36 34,5 32 29,5 27 24 21 EV1/4 2,2 3 2 57,5 57,5 57,5 57,5 57,5 57,5 57,5 57,5 57 57 56,5 56 55,5 55 54,5 54 53 52 51,5 5,5 49,5 47 44,5 42 38,5 35 31 27 EV1/5 3 4 2 72,5 72,5 73 73 73 72,5 72,5 72,5 72,5 72 71,5 71 7,5 7 69,5 68,5 67,5 66,5 65,5 64,5 63 6,5 57,5 53,5 49,5 45,5 4,5 35,5 EV1/6 4 5,5 2 87,5 87,5 87,5 87,5 87,5 87,5 87,5 87,5 87,5 87 86,5 86 85,5 85 84 83 82 81 79,5 78,5 77 73,5 7 65,5 61 55,5 5 43,5 EV1/7 4 5,5 2 12 12 12 12 12 12 12 12 11,5 11 1,5 1 99,5 98,5 97,5 96,5 95 93,5 92 9,5 89 85 81 76 7 64 57,5 5 EV1/8 5,5 7,5 2 117 117 117 117 117 117 117 116,5 116,5 116 115,5 115 114 113 112 11,5 19 17,5 16 14 12,5 98 93 87,5 81 74 66 58 EV1/9 5,5 7,5 2 131 131,5 131,5 131,5 131,5 131,5 131 131 13,5 13 129,5 128,5 127,5 126,5 125,5 124 122 12,5 118,5 116,5 114,5 19,5 14 97,5 9,5 82,5 73,5 64,5 EV1/1 7,5 1 2 146,5 146,5 146,5 146,5 146,5 146,5 146,5 146,5 146 145,5 145 144 143 142 14,5 139 137 135,5 133 131 128,5 123,5 117 11 12 93 83,5 73,5 EV1/11 7,5 1 2 161 161 161 161 161 161 161 16,5 16,5 16 159 158 157 155,5 154 152,5 15,5 148,5 146 143,5 141 135 128,5 12,5 111,5 12 91,5 8 EV1/12 7,5 1 2 175 175,5 175,5 175,5 175,5 175,5 175,5 175 174,5 174 173 172 171 169,5 167,5 165,5 163,5 161,5 159 156 153,5 147 139,5 131 121 11,5 99 87 EV1/13 7,5 1 2 189,5 189,5 19 19 19 19 189,5 189,5 189 188 187 186 184,5 183 181 179 176,5 174 171,5 168,5 165,5 158,5 15,5 141 13,5 119 16,5 93,5 EV1/15 11 15 2 22 22,5 22,5 22,5 221 221 221 22,5 22,5 219,5 219 218 216,5 214,5 212,5 21 27,5 25 22 198,5 195 187,5 178 167,5 155,5 142 128 112,5 EV1/17 11 15 2 249 249,5 249,5 25 25 25 25 25 249,5 248,5 247,5 246,5 244,5 242,5 24 237,5 234,5 231,5 228 224,5 22,5 211 2,5 188,5 175 16 143,5 126,5 6/76

EV 6-1 MATERIAL IN CONTACT WITH THE LIQUID Pos. PARTS DESCRIPTIONS MATERIAL I version N version Type ASTM/AISI DIN / EN ASTM/AISI DIN / EN 1. Pump casing Stainless Steel CF 8 / AISI 34 1.438 CF 8M / AISI 316 1.448 1.2 Filling and draining plug Stainless Steel AISI 34 1.431 AISI 316 1.441 1.6 Upper flange Stainless Steel AISI 34 1.431 AISI 316 1.441 2. Outer Case Stainless Steel AISI 34 1.431 AISI 316 1.441 2.1 Mechanical seal housing Stainless Steel AISI 34 1.431 AISI 316 1.441 2.5 Filling plugs Stainless Steel AISI 34 1.431 AISI 316 1.441 3. Pump shaft Stainless Steel AISI 34 1.431 AISI 316 1.441 3.1 Kit Mechanical seal Silicon Carbide SiC, Graphite, EPDM, Stainless Steel - - - - 3.2 Mechanical seal fastening kit Stainless Steel AISI 34 1.431 AISI 316 1.441 3.3 Kit O-rings EPDM - - - - 4. Stage housing and diffuser Stainless Steel AISI 34 1.431 AISI 316 1.441 4.1 Stage Centering outlet Stainless Steel AISI 34 1.431 AISI 316 1.441 4.2 Floating neck ring PPS - - - - 4.3 Initial stage housing Stainless Steel AISI 34 1.431 AISI 316 1.441 4.4 Last Stage with diffuser Stainless Steel AISI 34 1.431 AISI 316 1.441 4.5 Stage Centering inlet Stainless Steel AISI 34 1.431 AISI 316 1.441 4.6 Stage housing and diffuser with bearing Stainless Steel / Tungsten Carbide AISI 34 1.431 AISI 316 1.441 5. Impeller Stainless Steel AISI 34 1.431 AISI 316 1.441 5.1 Impeller spacer Stainless Steel AISI 34 1.431 AISI 316 1.441 5.2 Intermediary sleeve Tungsten Carbide - - - - 5.3 Intermediary sleeve spacer Stainless Steel AISI 34 1.431 AISI 316 1.441 7/76

EV 15-2 TABLE OF HYDRAULIC PERFORMANCES AT 6Hz RATED Q = DELIVERY H1 PUMP POWER l/min 8 16 2 24 28 32 36 4 44 48 52 56 TYPE Bar m³/h 4,8 9,6 12 14,4 16,8 19,2 21,6 24 26,4 28,8 31,2 33,6 kw HP H = TOTAL HEAD METERS COLUMN OF WATER EV 15/1 1,5 2 2 21 2 18,5 18 17,5 16,5 15,5 14 12,5 1,5 8 EV 15/2 3 4 2 42 4,5 37,5 36,5 35 33,5 31,5 29 25,5 21,5 16,5 EV 15/3 4 5,5 2 63,5 6,5 56,5 55 53 5,5 47,5 43,5 38,5 32 25 EV 15/4 5,5 7,5 2 84,5 81 75,5 73,5 7,5 67 63 58 51 42,5 33,5 EV 15/5 7,5 1 2 16 11,5 95 92 88,5 84,5 79,5 73 64,5 54 42,5 EV 15/6 11 15 2 128 123,5 117 114 11 15,5 1,5 92,5 82,5 7,5 57,5 EV 15/7 11 15 2 149 143,5 136 132,5 128 122,5 116,5 17,5 95,5 81,5 66,5 EV 15/8 11 15 2 17 164 155 151 145,5 139 132,5 122 18,5 92,5 75 EV 15/9 15 2 2 191,5 184,5 174 169,5 163,5 156,5 149 137 122 14 84,5 EV 15/1 15 2 2 212,5 24,5 193 187,5 181 173,5 165 151,5 135 115 93 EV 15/11 15 2 2 233,5 224,5 211,5 26 198,5 19 18,5 166 147,5 125,5 11,5 EV 15/12 18,5 25 2 255 245,5 232 226 218 29 199 183 163 139 112,5 EV 2/1 2,2 3 2 22,5 22 21 2,5 2 19,5 18,5 18 17 15,5 13,5 11,5 9,5 EV 2/2 4 5,5 2 45,5 44 42,5 41 4,5 39 37,5 36,5 34,5 31,5 28 24,5 19,5 EV 2/3 5,5 7,5 2 68 66 63,5 61,5 6 58,5 56 54,5 51 47 41,5 36 29 EV 2/4 7,5 1 2 91 88 85 82,5 8,5 78 75 72,5 68,5 63 56 48,5 39,5 EV 2/5 11 15 2 114,5 111 17,5 14 12 99 95,5 92,5 87,5 8,5 72 62,5 51,5 EV 2/6 11 15 2 137,5 134 13 127 124 121 117 114,5 18,5 1 89,5 77,5 64,5 EV 2/7 15 2 2 16 156,5 151,5 147,5 144 14,5 136,5 133,5 126 116,5 14 9,5 75 EV 2/8 15 2 2 182,5 178,5 172,5 168 164 16 155,5 151,5 143,5 132 118 12,5 84,5 EV 2/9 18,5 25 2 26 21 195 19 185,5 181 176 172 162,5 15 134 117 96,5 EV 2/1 18,5 25 2 228,5 223 216 21,5 25,5 2,5 194,5 19 18 166 148 129 16,5 8/76

EV 15-2 MATERIAL IN CONTACT WITH THE LIQUID Pos. PARTS DESCRIPTIONS MATERIAL I version N version Type ASTM/AISI DIN / EN ASTM/AISI DIN / EN 1. Pump casing Stainless Steel CF 8 / AISI 34 1.431 CF 8M / AISI 316 1.448 1.2 Filling and draining plug Stainless Steel AISI 34 1.431 AISI 316 1.441 1.6 Upper Flange Stainless Steel AISI 34 1.431 CF 8M / AISI 316 1.448 2. Outer Case Stainless Steel AISI 34 1.431 AISI 316 1.441 2.1 Mechanical seal housing Stainless Steel AISI 34 1.431 CF 8M / AISI 316 1.448 / 1.441 2.5 Filling plugs Stainless Steel AISI 34 1.431 AISI 316 1.441 3. Pump shaft Stainless Steel AISI 34 1.431 AISI 316 1.441 3.1 Kit Mechanical seal Silicon Carbide SiC, Graphite, EPDM, Stainless Steel - - - - 3.2 Mechanical seal fastening kit Stainless Steel AISI 34 1.431 AISI 316 1.441 3.3 Kit O-rings EPDM - - - - 4. Stage housing and diffuser Stainless Steel AISI 34 1.431 AISI 316 1.441 4.1 Stage Centering outlet Stainless Steel AISI 34 1.431 AISI 316 1.441 4.2 Floating neck ring PPS - - - - 4.3 Initial stage housing Stainless Steel AISI 34 1.431 AISI 316 1.441 4.4 Last Stage with diffuser Stainless Steel AISI 34 1.431 AISI 316 1.441 4.6 Stage housing and diffuser with bearing Stainless Steel / Tungsten carbide AISI 34 1.431 AISI 316 1.441 5. Impeller Stainless Steel AISI 34 1.431 AISI 316 1.441 5.1 Impeller spacer Stainless Steel AISI 34 1.431 AISI 316 1.441 5.2 Intermediary sleeve Tungsten Carbide - - - - 5.3 Intermediary sleeve spacer Stainless Steel AISI 34 1.431 AISI 316 1.441 9/76

EV 3-45 TABLE OF HYDRAULIC PERFORMANCES AT 6Hz RATED Q = DELIVERY H1 POWER l/min 3 35 4 45 55 7 8 9 1 12 PUMP TYPE Bar m³/h 18 21 24 27 33 42 48 54 6 72 kw HP H = TOTAL HEAD METERS COLUMN OF WATER EV 3/1-1A 3 4 2 26 24,5 24 23 22,5 2,5 16,5 13,5 EV 3/1 4 5,5 2 35 31,5 31 3 29,5 27,5 24,5 21 EV 3/2-2A 5,5 7,5 2 52 49 48 46,5 45 41,5 33,5 27 EV 3/2-1A 7,5 1 2 61 56 55 53,5 52 48,5 41,5 35 EV 3/2 11 15 2 71 64 62,5 61,5 6 56,5 5,5 44 EV 3/3-2A 11 15 2 88 81,5 8 78 75,5 7,5 59,5 5 EV 3/3-1A 11 15 2 97 88,5 86,5 84,5 82,5 77 67 57,5 EV 3/3 15 2 9 16 95 93,5 91,5 89,5 84 74,5 65 EV 3/4-2A 15 2 9 123 112,5 11,5 18 14,5 98 83,5 71 EV 3/4-1A 15 2 11 131,5 119,5 117 114,5 111,5 14,5 91 78 EV 3/4 18,5 25 12 141 127 124,5 122 119 112,5 99,5 86,5 EV 3/5-2A 18,5 25 12 158 144,5 142 138,5 134,5 126 18,5 92,5 EV 3/5-1A 18,5 25 14 167 151 148,5 145 141,5 132,5 115,5 1 EV 3/5 22 3 16 176 158 155 152 148 139,5 123,5 17,5 EV 3/6-2A 22 3 16 193 175,5 172 168 163,5 153 132 113 EV 3/6-1A 22 3 17 21,5 182 178,5 174,5 17 159,5 139,5 12,5 EV 3/6 3 4 19 213 192,5 189 185,5 181,5 171,5 152,5 133,5 EV 3/7-2A 3 4 19 23,5 21,5 27 22,5 197,5 185,5 162 14 EV 3/7-1A 3 4 2 239,5 217,5 213,5 29,5 24,5 192,5 169,5 147,5 EV 3/7 3 4 2 248,5 224,5 22,5 216 211 199,5 177 155 EV 3/8-2A 3 4 2 265,5 242,5 238 233 227 213,5 186,5 161,5 EV 3/8-1A 37 5 2 275 249,5 245 24 234,5 221 194,5 169,5 EV 3/8 37 5 2 284 256,5 251,5 247 241,5 228 22 177 EV 45/1-1A 5,5 7,5 2 28 27 26 25 23,5 22 2 15 EV 45/1 7,5 1 2 35,5 33,5 32,5 31,5 3,5 29 27 22,5 EV 45/2-2A 11 15 2 56 54,5 53 5,5 48 44,5 4,5 31 EV 45/2-1A 11 15 2 63,5 61 59,5 57 54,5 51 47,5 38 EV 45/2 15 2 7 7,5 67,5 65,5 63 61 58 54,5 45,5 EV 45/3-2A 18,5 25 7 91,5 88 86 82 78,5 73,5 68 53,5 EV 45/3-1A 18,5 25 9 98,5 94 92 88,5 85 8 74,5 6,5 EV 45/3 18,5 25 11 16 1,5 98 94,5 91,5 86,5 81 67,5 EV 45/4-2A 22 3 11 126 12,5 117,5 112,5 18 11,5 94 75 EV 45/4-1A 3 4 14 135 129,5 126,5 122 117,5 111,5 14 86 EV 45/4 3 4 16 142,5 136 133 128,5 124,5 118,5 111 93,5 EV 45/5-2A 3 4 16 163 156,5 153 147 141,5 133,5 124,5 11,5 EV 45/5-1A 3 4 18 17,5 163 159,5 153,5 148 14,5 131 18,5 EV 45/5 37 5 2 178 17 166 16 155 147,5 138,5 116,5 EV 45/6-2A 37 5 2 198,5 19,5 186 179 172,5 163 151,5 124 EV 45/6-1A 37 5 2 26 197 192 185 179 169,5 158,5 131,5 EV 45/6 37 5 2 213 23,5 198,5 191,5 185,5 176,5 165,5 139 EV 45/7-2A 45 6 2 234 224,5 219,5 211 23,5 192,5 179,5 148 EV 45/7-1A 45 6 2 241,5 231 225,5 217,5 21,5 199,5 186,5 155 EV 45/7 45 6 2 249 237,5 232 224 217 26,5 193,5 162,5 1/76

EV 3-45 MATERIAL IN CONTACT WITH THE LIQUID Pos. PARTS DESCRIPTIONS MATERIAL G version N version Type ASTM/AISI DIN / EN ASTM/AISI DIN / EN 1. Pump casing Cast Iron / Stainless Steel A48 Class 35 GJL-25 CF 8M / AISI 316 1.448 1.2 Draining plug Stainless Steel AISI 34 1.431 AISI 316 1.441 1.6 Upper Flange Stainless Steel CF 8 / AISI 34 1.438 CF 8M / AISI 316 1.448 2. Outer Case Stainless Steel AISI 34 1.431 AISI 316 1.441 2.1 Mechanical seal housing Stainless Steel CF 8 / AISI 34 1.438 CF 8M / AISI 316 1.448 2.5 Filling plugs Stainless Steel AISI 34 1.431 AISI 316 1.441 3. Pump shaft Stainless Steel AISI 431 1.457 AISI 329 1.446 3.1 Kit Mechanical seal Silicon Carbide SiC, Graphite, EPDM, Stainless Steel - - - - 3.2 Mechanical seal fastening kit Stainless Steel AISI 316 1.441 AISI 316 1.441 3.3 Kit O-rings EPDM - - - - 4. Stage housing and diffuser Stainless Steel / Graphite AISI 34 1.431 AISI 316 1.441 4.2 Floating neck ring PTFE - - - - 4.5 Stage Centering inlet Stainless Steel AISI 316 1.441 AISI 316 1.441 4.6 Stage housing and diffuser with bearing Stainless Steel AISI 34 1.431 AISI 316 1.441 4.7 Flange clamping neck ring Stainless Steel AISI 34 1.431 AISI 316 1.441 4.8 Spring ring Stainless Steel AISI 316 1.441 AISI 316 1.441 5. Impeller Stainless Steel AISI 34 1.431 AISI 316 1.441 51.1 Split cone Stainless Steel AISI 34 1.431 AISI 316 1.441 51.2 Intermediary sleeve nut Stainless Steel / Tungsten Carbide AISI 316 1.441 AISI 316 1.441 51.3 Journal sleeve Stainless Steel / Tungsten Carbide AISI 316 1.441 AISI 316 1.441 51.4 Split cone nut Stainless Steel AISI 34 1.431 AISI 316 1.441 51.5 Intermediate impeller with screw Stainless Steel AISI 34 1.431 AISI 316 1.441 11/76

EV 65-95 TABLE OF HYDRAULIC PERFORMANCES AT 6Hz RATED Q = DELIVERY H1 POWER l/min 6 717 833 9 183 12 1433 155 17 1917 2167 235 PUMP TYPE Bar m³/h 36 43 5 54 65 72 86 93 12 115 13 141 kw HP H = TOTAL HEAD METERS COLUMN OF WATER EV 65/1-1A 7,5 1 2 28,5 27,5 27 26 25,5 24 22,5 19 16,5 13 EV 65/1 11 15 2 41 37 36 35,5 35 33,5 32,5 3 28,5 25,5 EV 65/2-2A 15 2 18 57 55 53,5 52,5 51,5 48,5 45,5 38 33,5 26,5 EV 65/2-1A 18,5 25 2 69 64,5 63 61,5 6,5 58 55,5 49 45 38,5 EV 65/2 22 3 2 81,5 73,5 71,5 7 69 66,5 64,5 59,5 56 5 EV 65/3-2A 22 3 2 97 91 89 87 85,5 81,5 77,5 67 6,5 51 EV 65/3-1A 3 4 2 111 12,5 1 98 96,5 92,5 89,5 8,5 75 65,5 EV 65/3 3 4 2 123 112 19 16,5 15 11,5 99 91,5 86 77,5 EV 65/4-2A 37 5 2 139,5 13 127 124,5 122,5 117 112,5 99,5 92 79 EV 65/4-1A 37 5 2 151,5 139,5 136 133 131 126 122 11,5 13 9,5 EV 65/4 45 6 2 164,5 149 145 142,5 14,5 135 132 122 115 13,5 EV 65/5-2A 45 6 2 18,5 167 163 16 157,5 151 145,5 13 12,5 15 EV 65/5-1A 45 6 2 192,5 176,5 172 168,5 166 159,5 155 141 132 116,5 EV 95/1-1A 11 15 2 32,5 31 3,5 3 28 27 24,5 21 16 11,5 EV 95/1 15 2 19 45 4,5 38,5 37,5 35,5 34,5 33 3 25,5 21,5 EV 95/2-2A 18,5 25 19 64,5 62 6,5 59 55,5 53 48,5 41,5 31 22 EV 95/2-1A 22 3 2 77 71 68,5 66,5 63 6,5 57 5 4,5 32 EV 95/2 3 4 2 9,5 81,5 78,5 76 72,5 7,5 67 61,5 52,5 44,5 EV 95/3-2A 37 5 2 11,5 13,5 1,5 98,5 93 89,5 83,5 73,5 58,5 45,5 EV 95/3-1A 37 5 2 123 113 19 16 1,5 97 92 82,5 68 56 EV 95/3 45 6 2 136 122,5 117,5 114 18,5 15,5 11 92 78,5 67 EV 95/4-2A 45 6 2 155,5 144,5 139,5 136 129 124 117 14 84,5 67,5 12/76

EV 65-95 MATERIAL IN CONTACT WITH THE LIQUID Pos. PARTS DESCRIPTIONS MATERIAL G version N version Type ASTM/AISI DIN / EN ASTM/AISI DIN / EN 1. Pump casing Cast Iron / Stainless Steel A48 Class 35 GJL-25 CF 8M / AISI 316 1.448 1.2 Draining plug Stainless Steel AISI 34 1.431 AISI 316 1.441 1.6 Upper Flange Stainless Steel CF 8 / AISI 34 1.438 CF 8M / AISI 316 1.448 2. Outer Case Stainless Steel AISI 34 1.431 AISI 316 1.441 2.1 Mechanical seal housing Stainless Steel CF 8 / AISI 34 1.438 CF 8M / AISI 316 1.448 2.5 Filling plugs Stainless Steel AISI 34 1.431 AISI 316 1.441 3. Pump shaft Stainless Steel AISI 431 1.457 AISI 329 1.446 3.1 Kit Mechanical seal Silicon Carbide SiC, Graphite, EPDM, Stainless Steel - - - - 3.2 Mechanical seal fastening kit Stainless Steel AISI 316 1.441 AISI 316 1.441 3.3 Kit O-rings EPDM - - - - 4. Stage housing and diffuser Stainless Steel / Graphite AISI 34 1.431 AISI 316 1.441 4.1 Stage Centering outlet Stainless Steel CF 8 / AISI 34 1.438 CF 8M / AISI 316 1.448 4.2 Floating neck ring PTFE - - - - 4.5 Stage Centering inlet Stainless Steel AISI 316 1.441 AISI 316 1.441 4.6 Stage housing and diffuser with bearing Stainless Steel AISI 34 1.431 AISI 316 1.441 4.7 Flange clamping neck ring Stainless Steel AISI 34 1.431 AISI 316 1.441 4.8 Spring ring Stainless Steel AISI 316 1.441 AISI 316 1.441 5. Impeller Stainless Steel AISI 34 1.431 AISI 316 1.441 51.1 Split cone Stainless Steel AISI 34 1.431 AISI 316 1.441 51.2 Intermediary sleeve nut Stainless Steel / Tungsten Carbide AISI 316 1.441 AISI 316 1.441 51.3 Journal sleeve Stainless Steel / Tungsten Carbide AISI 316 1.441 AISI 316 1.441 51.4 Split cone nut Stainless Steel AISI 34 1.431 AISI 316 1.441 51.5 Intermediate impeller with screw Stainless Steel AISI 34 1.431 AISI 316 1.441 13/76

Motors AEG FEATURES Protection degree: IP55 Max ambient temperature: 4 C Insulation class: F Size B14 up to 4kW, size B5 from 5.5kW and above Single-phase motors designed for range of rated voltage 22V 6Hz SINGLE-PHASE MOTORS The range available is especially designed for superior performance and low vibration and noise. The AMM range is ideal for low-inertia applications and the application industry. Standard Voltage 22V Capacitor inside terminal box THREE-PHASE MOTORS ENERGY EFFICIENT High Effi ciency Three-phase Motors IE3 code The standard design includes the following basic features to give a high level of fl exibility: Multi Mount Construction for an easy change of terminal box position Terminal box rotates by 9 to allow cable entry from any direction Easy-to-change fl anges with over-sized and smaller-sized dimensions Provision for oil seal at Drive End Motors conforming to the higher effi ciency standards for Europe, North America and Australia Standard Voltage 22/38V Power Power IEC Construction I N [A] RPM M N η cos φ I A /I N M A /M N Weight kw HP Size Design 22V min -1 Nm % Kg,37,5 71 B14 3,2 333 1,1 56,,89 3,1,8 7,1,55,75 71 B14 4, 348 1,5 65,,98 5,7,8 8,5,75 1 8 B14 6,1 345 2,1 65,,89 5,3,8 11,4 1,1 1,5 8 B14 6,8 335 3,1 74,,95 4,4,5 11,8 1,5 2 9 B14 1,5 33 4,3 73,,95 3,7,5 17,3 2,2 3 9 B14 14,5 335 6,3 76,,9 5,5 19,3 Three-phase motors designed for range of rated voltage 22/38V 6Hz, 2 poles IE2 IE3 Power Power IEC Construction I N [A] I N [A] RPM M N η cos φ I A /I N M A /M N Weight kw HP Size Design 22V Y 38V min -1 Nm % Kg,37,5 71 B14 1,8 1, 34 1,1 72,,75 4,2 2,3 5,8,55,75 71 B14 3, 1,7 345 1,5 73,,77 4,6 2,5 6,2,75 1 8 B14 3,3 1,9 35 2,4643 77,,78 8,9 4,7 9,5 1,1 1,5 8 B14 4,7 2,7 348 3, 84,,78 9,3 5, 11,1 1,5 2 9 B14 5,9 3,4 3515 4,7539 85,5,8 8,4 3,6 14 2,2 3 9 B14 8, 4,6 348 6, 86,5,84 9,2 4, 16 3 4 1 B14 1,4 6, 3515 8,1578 88,1,88 8,8 5,5 22,8 4 5,5 112 B14 13,2 7,6 352 1,9 89,,89 1,9 6,1 26,5 5,5 7,5 132 B5 18,2 1,5 351 14,9644 89,5,89 9,6 3,6 27,4 7,5 1 132 B5 25,1 14,5 352 2,3 9,2,87 1,4 4,5 36 11 15 16 B5 34,3 19,8 352 29,8438 91,,92 9,7 4,4 59 15 2 16 B5 46,4 26,8 352 4,7 91,,92 9,6 3,7 68 18,5 25 16 B5 62, 35,6 354 49,982 91,7,86 1,7 4,6 14 22 3 18 B5 71,7 41,7 353 59,5 91,7,88 1,4 4,5 14 3 4 2 B5 94, 54, 3565 8,8 94,1,9 9 2,8 239 37 5 2 B5 114, 66, 356 99, 93,9,91 8,5 2,6 249 45 6 225 B5 137, 79, 357 12 95,,91 7,8 2,5 322 14/76

New International Efficiency classes of motors IE code The new IEC 634-3:28 defi nes worldwide the effi ciency classes of motors. IE1 = Standard Effi ciency (comparable to EFF2) IE2 = High Effi ciency (comparable to EFF1) IE3 = Premium Effi ciency The effi ciency levels according to IEC 634-3 are measured based on the test methods defi ned in IEC 634-2-1:27. The IEC 634-3 only defi nes requirements of effi ciency classes and aims to create provisions for International consistency. It does not defi ne which motors must be supplied with which effi ciency level. This is left to respective regional legislation. Output IE1 code Standard Efficiency IE2 code Standard Efficiency IE3 code Standard Efficiency kw 2 poles 4 poles 6 poles 2 poles 4 poles 6 poles 2 poles 4 poles 6 poles.75 72.1 72.1 7. 77.4 79.6 75.9 8.7 82.5 78..9 1.1 75. 75. 72.9 79.6 81.4 78.1 82.7 84.1 81. 1.5 77.2 77.2 75.2 81.3 82.8 79.8 84.2 85.3 82.5 2.2 79.7 79.7 77.7 83.2 84.3 81.8 85.9 86.7 84.3 3 81.5 81.5 79.7 84.6 85.5 83.3 87.1 87.7 85.6 4 83.1 83.1 81.4 85.8 86.6 84.6 88.1 88.6 86.8 5.5 84.7 84.7 83.1 87. 87.7 86. 89.2 89.6 88. 7.5 86. 86. 84.7 88.1 88.7 87.2 9.1 9.4 89.1 11 87.6 87.6 86.4 89.4 89.8 88.7 91.2 91.4 9.3 15 88.7 88.7 87.7 9.3 9.6 89.7 91.9 92.1 91.2 18.5 89.3 89.3 88.6 9.9 91.2 9.4 92.4 92.6 91.7 22 89.9 89.9 89.2 91.3 91.6 9.9 92.7 93. 92.2 3 9.7 9.7 9.2 92. 92.3 91.7 93.3 93.6 92.9 37 91.2 91.2 9.8 92.5 92.7 92.2 93.7 93.9 93.3 45 91.7 91.7 91.4 92.9 93.1 92.7 94. 94.2 93.7 Effi ciency values according to IEC 634-3;28. Effi ciency standard calculation: IEC 634-2-1;27 Noise The noise level of an electrical machine is determined by measuring the sound pressure level in accordance with curve A of the sound level meter to EN 6651 and is indicated in db (A). The permitted noise levels of electrical machines are fi xed in EN 634-9 (IEC 34-9). The noise level of our motors is well below these limit values. Air-borne sound measurements are carried out in an anechoic testing chamber to EN 2168-ISO 168. Speed corresponding to a mains frequency of 5Hz and the number of poles. Noise levels The noise values listed below refer to 5Hz at rated voltage with a tolerance of up to + 3 db(a). Values for polechanging motors on request. For 6Hz supply values are 3-5 db(a) higher. Sound pressure level LpA and sound power level LWA for three-phase single-speed motors with dimensions and output ratings to IEC 672 Frame 2 pole 4 pole size L WA L pa L WA L pa 56 57 48 47 38 63 58 49 47 38 71 61 52 51 42 8 72 6 6 48 9 74 62 61 49 1 78 66 62 5 112 8 68 65 53 132 81 72 71 59 16 87 74 75 62 18 9 77 78 66 2 91 78 8 68 225 92 8 88 76 15/76

Mechanical seal specifications (in accordance with EN 12756) Type U Type B A B D A B D C C 11485 9/212 114115 2/215 Standard version Position Model Type A B C D Stationary part Rotating part Other components Elastomers Temperature E1 B Q G E Graphite Silicon carbide AISI 316 EPDM -3 C +12 C Available on request Position Model Type A B C D Stationary part Rotating part Other components Elastomers Temperature ( C) E2 Q Q G E Silicon carbide Silicon carbide AISI 316 EPDM -1 C +12 C V3 Q Q G V Silicon carbide Silicon carbide AISI 316 FKM -1 C +12 C V4 B Q G V Graphite Silicon carbide AISI 316 FKM -1 C +12 C E5 U U G E Tungsten carbide Tungsten carbide AISI 316 EPDM -1 C +12 C V6 U U G V Tungsten carbide Tungsten carbide AISI 316 FKM -1 C +12 C Type Material B E Graphite EPDM G AISI 316 Q V U Silicon carbide FKM Tungsten carbide 16/76

Compatibility of fluids and materials Liquids (aqueous solutions) Concentration Temperature EV models (%) Min/Max ( C) G I N Acetic acid 1 4 +18 +7 E1 E1 Aluminium sulfate 1 25 +5 +5 E2 Ammonia in water 25-2 +5 E1 E1 Ammonium sulfate 1 +5 +6 E2 Benzoic acid 4 +2 +8 V4 V4 Caustic soda 25 +5 +7 E2 E2 Chloroform 1-1 +3 V4 V4 Citric acid 5 +5 +7 E1 E1 Copper sulfate 1 2 +5 +3 V3 Deionised, demineralised water 1 +5 +11 E1 E1 Diathermic oil 1 +9 +12 V4 V4 V4 Emulsion oil and water any 1 5 +15 +9 V4 V4 V4 Ethylene glycol 1 3-18 +12 E1 E1 ferrous sulfate and ferric sulfate 1 +5 +3 E1 Formic acid 5 +5 +25 E1 E1 Glycerine 1 +9 +12 E1 E1 E1 Hydrochloric acid 2 max +5 +25 V3 Mineral oil 1 +9 +12 V4 V4 V4 Nitric acid 4 +5 +3 V3 V3 Perchloroethylene 1-1 +3 V4 V4 V4 Phosphates-polyphosphates 1 +5 +9 E1 Phosphoric acid 5 +5 +3 E1 Propylene glycol 3-1 +1 V3 V3 V3 Sea water max 35 ppm +2 +6 E1 Sodium bicarbonate (Baking soda) 6 +5 +6 E1 Sodium hypochlorite 1 +5 +25 V3 Sodium nitrate 1 +5 +6 E1 E1 Sodium sulfate 15 +5 +4 E2 E2 E2 Sulphuric acid 2 +5 +25 V4 Tannic acid 2 +5 +5 E1 Tartaric acid 5 +5 +25 V3 V3 Trichloroethylene 1-1 +4 V4 V4 V4 Vegetable oil 1 +7 +11 E1 E1 E1 Water 1 +5 +12 E1 E1 E1 The table is to be considered as a general guide. It is important to consider the specifi c working conditions; in particular to consider the concentration of the pumped liquid, the specific weight of the liquid and/or the viscosity, the liquid temperature and pressure. All these conditions are relevant for the motor and pump performance. When pumping dangerous liquids, it is recommended to take safety precautions. For further details, please contact us. 17/76

EV Series Performance Curves and Technical Data EV 1-3 - 6-1 - 15-2 - 3-45 - 65-95 6Hz 18/76

EV 1 19/76

EV 1 Performance curves 6Hz ft 36 m 11 32 1 EV 1/1 28 9 EV 1/9 24 8 7 EV 1/8 EV 1/7 Efficiency Total Head NPSH 2 16 12 8 4 ft 22 18 14 1 6 2 6 5 4 3 2 1 EV 1/6 EV 1/5 EV 1/4 EV 1/3 EV 1/2..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 1 2 3 4 5 6 % 6 5 4 3 2 1..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 m 7 6 5 4 3 2 1..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 m 3 /h l/min m 3 /h m 3 /h 1 2 3 4 5 6 2 4 6 8 1 12 14 16 Capacity The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. l/min U.S. gpm 114151 1/215 2/76

EV 1 HP kw 1.1 1.4 1. 1.3 1.2.9 3482 3479 EV 1/1 1.1 1..8 3494 354 3493 349 EV 1/9 3486 3497 Power P2.9.8.7.6.7.6.5 3532 3538 3514 3522 3495 357 3471 3486 3377 3456 3473 3352 3453 347 3348 EV 1/8 EV 1/7 EV 1/6 3462 3478 3369.5.4 3518 3527 3421 3413 3393 3389 EV 1/5 344.4.3 3461 3449 3384 3366 3363 EV 1/4 3378.3.2.2 3482 3446 3469 3416 3447 3478 3424 3463 341 347 3453 3451 EV 1/3 EV 1/2 3418 3458.1.1 3492....4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 1 2 3 4 5 6 m 3 /h l/min 2 4 6 8 1 12 14 16 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114151 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 21/76

EV 1 Performance curves 6Hz ft 9 m 28 85 8 26 24 EV 1/25 75 7 22 EV 1/22 65 6 2 18 EV 1/19 Efficiency Total Head NPSH 55 5 45 4 35 3 25 2 15 1 ft 22 18 14 1 6 2 16 14 12 1 8 6 4 EV 1/17 EV 1/15 EV 1/14 EV 1/13 EV 1/12 EV 1/11 2..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 1 2 3 4 5 6 % 6 5 4 3 2 1..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 m 7 6 5 4 3 2 1..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 m 3 /h l/min m 3 /h m 3 /h 1 2 3 4 5 6 2 4 6 8 1 12 14 16 Capacity The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. l/min U.S. gpm 114152 1/215 22/76

EV 1 HP kw 2.6 3.4 3.2 3. 2.4 2.2 3527 3525 EV 1/25 3529 2.8 2.6 2. 3535 3489 3487 EV 1/22 3494 Power P2 2.4 2.2 2. 1.8 1.6 1.4 1.2 1.8 1.6 1.4 1.2 1. 3558 3537 3545 355 3547 352 353 3537 3515 352 3526 351 3514 3522 3495 351 358 3474 3484 354 351 3513 3511 3482 3479 349 3487 3498 3495 346 3456 3471 3468 EV 1/19 EV 1/17 EV 1/15 EV 1/14 EV 1/13 EV 1/12 EV 1/11 357 3516 3487 3494 351 3466 3476 1..8 3534 3538 3542 3498 356.8.6 352 3526.6.4..4.8 1.2 1.6 2. 2.4 2.8 3.2 3.6 1 2 3 4 5 6 m 3 /h l/min 2 4 6 8 1 12 14 16 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114152 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 23/76

EV 1 Technical data 6Hz F version M T version Available from EV1/2 to EV1/15 L1+L2 L1 L2 D1 D2 L3+L2 T version V version L4+L2 L3 L4 5 25 N 2 Screw/Nut M1 Ø 42,4 75 16 Rp 1¼ DN 32 Oval flanges on body type PN16: the pump is supplied without threaded oval counter flanges (Optional accessories, including bolts and joints). 75 25 25 15 1 C version 21 Ø 59 18 5 25 21 Ø115 N 4xØ14 V version L5+L2 L5 5 Connections with rapid fittings type Victaulic : the pump is supplied without the collars (Optional accessories). F version N 4xØ13 Ø85 Round flanges on body type PN25: the pump is supplied without counterflanges (Optional accessories, including bolts and joints). Rp 1 DN 25 C version 25 162 Connections with round fittings type Clamp-FlexiClamp: the pump is supplied without collars (Optional accessories). 1141411 2/215 Motor Dimensions (mm) Weight (kg) Pump L1 L2 L3 L4 L5 M D1 D2 Electric Model Pump kw Dim F 1-PHASE 3-PHASE T V C 1-PHASE 3-PHASE 1-PHASE 3-PHASE Pump EV 1/2,37 71 312,5 215 215 287,5 287,5 287,5 129 112 142 142 17 15 2,8 EV 1/3,37 71 335 215 215 31 31 31 129 112 142 142 17 15 2,8 EV 1/4,37 71 357,5 215 215 332,5 332,5 332,5 129 112 142 142 17 15,5 21,3 EV 1/5,55 71 38 215 215 355 355 355 129 112 142 142 17 16 22,2 EV 1/6,55 71 42,5 215 215 377,5 377,5 377,5 129 112 142 142 17 16,5 22,7 EV 1/7,75 8 425 232 232 4 4 4 15 129 16 16 17 17 26,5 EV 1/8,75 8 447,5 232 232 422,5 422,5 422,5 15 129 16 16 17 17,5 27 EV 1/9 1,1 8 47 232 232 445 445 445 15 129 16 16 17 18 29,1 EV 1/1 1,1 8 492,5 232 232 467,5 467,5 467,5 15 129 16 16 17 18,5 29,6 EV 1/11 1,1 8 515 232 232 49 49 49 15 129 16 16 17 19 3,1 EV 1/12 1,1 8 537,5 232 232 512,5 512,5 512,5 15 129 16 16 17 19,5 3,6 EV 1/13 1,5 9 57 267 267 545 545 545 16 138 18 18 17 2,5 34,5 EV 1/14 1,5 9 592,5 267 267 567,5 567,5 567,5 16 138 18 18 17 21 35 EV 1/15 1,5 9 615 267 267 59 59 59 16 138 18 18 17 21,5 35,5 EV 1/17 2,2 9 66 267 267-635 635 16 138 18 18 17 22 38 EV 1/19 2,2 9 75 267 267-68 68 16 138 18 18 17 23 39 EV 1/22 2,2 9 772,5 267 267-747,5 747,5 16 138 18 18 17 24,5 4,5 EV 1/25 3 1 85-36 - 825 825-145 - 196 17 26,5 49,3 24/76

EV 3 25/76

EV 3 Performance curves 6Hz ft m 14 44 EV 3/12 4 12 EV 3/11 36 EV 3/1 32 1 EV 3/9 Efficiency Total Head NPSH 28 24 2 16 12 8 4 ft 18 16 14 12 1 8 6 4 2 8 6 4 2 EV 3/8 EV 3/7 EV 3/6 EV 3/5 EV 3/4 EV 3/3 EV 3/2..8 1.6 2.4 3.2 4. 4.8 5.6 1 2 3 4 5 6 7 8 9 1 l/min % 7 6 5 4 3 2 1..8 1.6 2.4 3.2 4. 4.8 5.6 m 3 /h m 6 5 4 3 2 1..8 1.6 2.4 3.2 4. 4.8 5.6 m 3 /h m 3 /h 1 2 3 4 5 6 7 8 9 1 l/min 4 8 12 16 2 24 Capacity U.S. gpm 114153 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 26/76

EV 3 HP kw 1.9 2.5 2.4 1.8 3499 EV 3/12 3498 2.3 2.2 2.1 2. 1.7 1.6 1.5 3519 356 3513 357 3469 EV 3/11 EV 3/1 356 3469 Power P2 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1..9.8 1.4 1.3 1.2 1.1 1..9.8.7.6 3552 3556 354 3546 3551 3537 3542 3521 3528 3535 3515 3526 3526 3497 357 3516 3491 355 348 3479 349 352 3472 349 346 3482 3495 3463 3481 345 EV 3/9 EV 3/8 EV 3/7 EV 3/6 EV 3/5 3482 3495 3463 3481 345.7.6.5.4.3.2.1.5.4.3.2.1 3536 3544 353 3474 353 3477 358 3433 3472 3454 3381 3434 3426 3342 346 345 3324 3392 3395 EV 3/4 EV 3/3 EV 3/2 3328 3394 3396....8 1.6 2.4 3.2 4. 4.8 5.6 1 2 3 4 5 6 7 8 9 1 m 3 /h l/min 4 8 12 16 2 24 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114153 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 27/76

EV 3 Performance curves 6Hz ft 85 8 75 7 65 m 26 24 22 2 EV 3/23 EV 3/21 EV 3/19 EV 3/18 Efficiency Total Head NPSH 6 55 5 45 4 35 3 25 2 15 ft 18 16 14 12 1 8 6 4 2 18 16 14 12 1 8 6 EV 3/17 EV 3/16 EV 3/15 EV 3/14 EV 3/13 4..8 1.6 2.4 3.2 4. 4.8 5.6 1 2 3 4 5 6 7 8 9 1 l/min % 7 6 5 4 3 2 1..8 1.6 2.4 3.2 4. 4.8 5.6 m 3 /h m 6 5 4 3 2 1..8 1.6 2.4 3.2 4. 4.8 5.6 m 3 /h m 3 /h 1 2 3 4 5 6 7 8 9 1 l/min 4 8 12 16 2 24 Capacity U.S. gpm 114154 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 28/76

EV 3 HP kw 3.8 5. 4.8 3.6 3529 EV 3/23 3529 4.6 4.4 3.4 3.2 3535 3536 EV 3/21 3536 Power P2 4.2 4. 3.8 3.6 3.4 3.2 3. 2.8 2.6 2.4 2.2 2. 1.8 1.6 1.4 1.2 1. 3. 2.8 2.6 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8 3564 3566 3558 356 3562 3564 3566 3545 3549 3556 3558 3544 3547 355 3552 3555 3528 3533 3545 3549 3527 3531 3535 3538 3542 357 3513 3541 3515 3519 3523 3528 3532 3491 3498 358 3513 3517 3522 3527 3483 3491 EV 3/19 EV 3/18 EV 3/17 EV 3/16 EV 3/15 EV 3/14 EV 3/13 358 3512 3517 3522 3526 3483 3491.6..8 1.6 2.4 3.2 4. 4.8 5.6 1 2 3 4 5 6 7 8 9 1 m 3 /h l/min 4 8 12 16 2 24 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114154 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 29/76

EV 3 Technical data 6Hz F version M T version Available from EV3/2 to EV3/14 D2 V version Ø 42,4 75 L1+L2 L1 L2 D1 L3+L2 25 25 15 1 C version Ø 59 21 18 L3 T version L4+L2 5 25 5 L4 N 2 Screw/Nut M1 16 Rp 1¼ DN 32 Oval flanges on body type PN16: the pump is supplied without threaded oval counter flanges (Optional accessories, including bolts and joints). 75 25 21 V version Connections with rapid fittings type Victaulic : the pump is supplied without the collars (Optional accessories). Ø115 N 4xØ14 5 L5+L2 L5 F version N 4xØ13 Ø85 Round flanges on body type PN25: the pump is supplied without counterflanges (Optional accessories, including bolts and joints). Rp 1 DN 25 C version 25 162 Connections with round fittings type Clamp-FlexiClamp: the pump is supplied without collars (Optional accessories). 1141411 2/215 Dimensions (mm) Weight (kg) Pump Motor L1 L2 L3 L4 L5 M D1 D2 Electric Model Pump kw Dim F 1-PHASE 3-PHASE T V C 1-PHASE 3-PHASE 1-PHASE 3-PHASE Pump EV 3/2,37 71 312,5 216 216 287,5 287,5 287,5 129 112 142 142 17 15 2,8 EV 3/3,55 71 335 216 216 31 31 31 129 112 142 142 17 15 21,2 EV 3/4,55 71 357,5 216 216 332,5 332,5 332,5 129 112 142 142 17 15,5 21,7 EV 3/5,75 8 38 232 232 355 355 355 15 129 16 16 17 16 25,5 EV 3/6 1,1 8 42,5 232 232 377,5 377,5 377,5 15 129 16 16 17 16,5 27,6 EV 3/7 1,1 8 425 232 232 4 4 4 15 129 16 16 17 17 28,1 EV 3/8 1,5 9 457,5 267 267 432,5 432,5 432,5 16 138 18 18 17 18 32 EV 3/9 1,5 9 48 267 267 455 455 455 16 138 18 18 17 18,5 32,5 EV 3/1 1,5 9 52,5 267 267 477,5 477,5 477,5 16 138 18 18 17 19 33 EV 3/11 2,2 9 525 267 267 5 5 5 16 138 18 18 17 19,5 35,5 EV 3/12 2,2 9 547,5 267 267 522,5 522,5 522,5 16 138 18 18 17 2 36 EV 3/13 2,2 9 57 267 267 545 545 545 16 138 18 18 17 2,5 36,5 EV 3/14 2,2 9 592,5 267 267 567,5 567,5 567,5 16 138 18 18 17 21 37 EV 3/15 2,2 9 615 267 267-59 59 16 138 18 18 17 21,5 37,5 EV 3/16 3 1 647,5-36 - 622,5 622,5-145 - 196 17 22,5 45,3 EV 3/17 3 1 67-36 - 645 645-145 - 196 17 23 45,8 EV 3/18 3 1 692,5-36 - 667,5 667,5-145 - 196 17 23,5 46,3 EV 3/19 3 1 715-36 - 69 69-145 - 196 17 24 46,8 EV 3/21 4 112 76-36 - 735 735-145 - 196 17 25 51,5 EV 3/23 4 112 85-36 - 78 78-145 - 196 17 25,5 52 3/76

EV 6 31/76

EV 6 Performance curves 6Hz ft m 16 5 45 14 EV 6/13 EV 6/12 4 12 EV 6/11 35 1 EV 6/1 EV 6/9 Efficiency Total Head NPSH 3 25 2 15 1 5 ft 18 16 14 12 1 8 6 4 2 % m 8 6 4 2 8 7 6 5 4 3 2 1 6 5 4 3 2 1 EV 6/8 EV 6/7 EV 6/6 EV 6/5 EV 6/4 EV 6/3 EV 6/2 1 2 3 4 5 6 7 8 9 1 11 2 4 6 8 1 12 14 16 18 1 2 3 4 6 1 2 3 4 6 m 3 /h l/min 5 7 8 9 1 11 m 3 /h 5 7 8 9 1 11 m 3 /h 2 4 6 8 1 12 14 16 18 4 8 12 16 2 24 28 32 36 Capacity The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 4 44 48 l/min U.S. gpm 114155 1/215 32/76

EV 6 HP kw 3.2 4.2 4. 3.8 3.6 3.4 3.2 3. 2.8 2.6 2.4 3519 3525 358 3515 3522 356 3513 352 EV 6/13 EV 6/12 EV 6/11 3511 3518 3524 Power P2 3. 2.8 2.6 2.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4 2.2 2. 1.8 1.6 1.4 1.2 1..8.6.4 356 3562 3565 3546 355 3555 3542 3549 3536 3547 354 3539 3544 3548 3519 3526 3534 3512 3524 355 3522 3511 3564 3531 3493 353 3513 3483 3499 3474 3498 3483 3421 3478 3489 351 3466 3485 3457 3484 3467 3397 3475 3487 3499 3464 3483 3455 3482 3465 3397 EV 6/1 EV 6/9 EV 6/8 EV 6/7 EV 6/6 EV 6/5 EV 6/4 EV 6/3 EV 6/2 3483 3494 355 3472 349 3464 3489 3473 349.2.2 359.. 1 2 3 4 5 6 7 8 9 1 11 2 4 6 8 1 12 14 16 18 m 3 /h l/min 4 8 12 16 2 24 28 32 36 4 44 48 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114155 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 33/76

EV 6 Performance curves 6Hz ft 9 m 28 85 8 75 7 65 26 24 22 2 EV 6/23 EV 6/21 EV 6/2 EV 6/19 EV 6/18 Efficiency Total Head NPSH 6 55 5 45 4 35 3 25 2 15 ft 18 16 14 12 1 8 6 4 2 % 18 16 14 12 1 m 8 6 4 8 7 6 5 4 3 2 1 6 5 4 3 2 1 EV 6/17 EV 6/16 EV 6/15 EV 6/14 1 2 3 4 5 6 7 8 9 1 11 2 4 6 8 1 12 14 16 18 1 2 3 4 6 1 2 3 4 6 m 3 /h l/min 5 7 8 9 1 11 m 3 /h 5 7 8 9 1 11 m 3 /h 2 4 6 8 1 12 14 16 18 4 8 12 16 2 24 28 32 36 Capacity The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 4 44 48 l/min U.S. gpm 114156 1/215 34/76

EV 6 HP kw 7.2 5.2 Power P2 6.8 6.4 6. 5.6 5.2 4.8 4.4 4. 4.8 4.4 4. 3.6 3.2 2.8 3549 3553 3555 3557 3532 3538 3541 3544 3532 3536 354 3543 3522 3528 3532 3535 352 3525 353 3535 353 3521 3527 3531 3534 3519 3524 3529 3534 352 EV 6/23 EV 6/21 EV 6/2 EV 6/19 EV 6/18 EV 6/17 EV 6/16 EV 6/15 EV 6/14 3525 3531 3535 3538 3524 3529 3533 3538 358 3.6 3548 3516 3551 3.2 2.4 3565 3553 3568 3555 2.8 2.4 2. 2. 1.6 357 3571 3562 3564 3565 3567 3557 3537 1.6 1.2 1.2. 1 2 3 4 5 6 7 8 9 1 11 2 4 6 8 1 12 14 16 18 m 3 /h l/min 4 8 12 16 2 24 28 32 36 4 44 48 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114156 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 35/76

EV 6 Technical data 6Hz F version M T version Available from EV6/2 to EV6/14 L1+L2 L1 L2 D1 D2 L3+L2 L3 T version V version L4+L2 L4 5 25 N 2 Screw/Nut M1 16 Rp 1¼ DN 32 Oval flanges on body type PN16: the pump is supplied without threaded oval counter flanges (Optional accessories, including bolts and joints). Ø 42,4 75 75 25 25 15 1 C version 21 18 25 5 21 Ø14 N 4xØ18 V version Connections with rapid fittings type Victaulic : the pump is supplied without the collars (Optional accessories). 5 L5+L2 L5 Ø 59 F version N 4xØ13 Ø1 Round flanges on body type PN25: the pump is supplied without counterflanges (Optional accessories, including bolts and joints). Rp 1¼ DN 32 C version 25 162 Connections with round fittings type Clamp-FlexiClamp: the pump is supplied without collars (Optional accessories). 1141411 2/215 Motor Dimensions (mm) Weight (kg) Pump L1 L2 L3 L4 L5 M D1 D2 Electric Model Pump kw Dim F 1-PHASE 3-PHASE T V C 1-PHASE 3-PHASE 1-PHASE 3-PHASE Pump EV 6/2,55 71 319,5 216 216 294,5 294,5 294,5 129 112 142 142 17 15 21,2 EV 6/3,75 8 345,5 232 232 32,5 32,5 32,5 15 129 16 16 17 15,5 25 EV 6/4 1,1 8 371,5 232 232 346,5 346,5 346,5 15 129 16 16 17 16 27,1 EV 6/5 1,1 8 397,5 232 232 372,5 372,5 372,5 15 129 16 16 17 16,5 27,6 EV 6/6 1,5 9 433,5 267 267 48,5 48,5 48,5 16 138 18 18 17 17,5 31,5 EV 6/7 1,5 9 459,5 267 267 434,5 434,5 434,5 16 138 18 18 17 18,5 32,5 EV 6/8 2,2 9 485,5 267 267 46,5 46,5 46,5 16 138 18 18 17 19 35 EV 6/9 2,2 9 511,5 267 267 486,5 486,5 486,5 16 138 18 18 17 19,5 35,5 EV 6/1 2,2 9 537,5 267 267 512,5 512,5 512,5 16 138 18 18 17 2 36 EV 6/11 3 1 573,5-36 548,5 548,5 548,5-145 - 196 17 21 43,8 EV 6/12 3 1 599,5-36 574,5 574,5 574,5-145 - 196 17 21,5 44,3 EV 6/13 3 1 625,5-36 6,5 6,5 6,5-145 - 196 17 22 44,8 EV 6/14 3 1 651,5-36 626,5 626,5 626,5-145 - 196 17 22,5 45,3 EV 6/15 4 112 677,5-36 - 652,5 652,5-145 - 196 17 23 49,5 EV 6/16 4 112 73,5-36 - 678,5 678,5-145 - 196 17 23,5 5 EV 6/17 4 112 729,5-36 - 74,5 74,5-145 - 196 17 24 5,5 EV 6/18 4 112 755,5-36 - 73,5 73,5-145 - 196 17 24,5 51 EV 6/19 5,5 132 957-328 - 932 932-16 - 225 3 44,5 78,1 EV 6/2 5,5 132 983-328 - 958 958-16 - 225 3 45 78,6 EV 6/21 5,5 132 19-328 - 984 984-16 - 225 3 45,5 79,1 EV 6/23 5,5 132 161-328 - 136 136-16 - 225 3 46,5 8,1 36/76

EV 1 37/76

EV 1 Performance curves 6Hz ft m 45 14 EV 1/9 4 12 EV 1/8 35 1 EV 1/7 NPSH Efficiency Total Head 3 25 2 15 1 5 ft 24 2 16 12 8 4 % m 8 6 4 2 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 EV 1/6 EV 1/5 EV 1/4 EV 1/3 EV 1/2 2 4 6 8 1 12 14 16 18 2 3 6 9 12 15 18 21 24 27 3 33 2 4 6 8 12 2 4 6 8 12 m 3 /h l/min 1 14 16 18 2 m 3 /h 1 14 16 18 2 m 3 /h 3 6 9 12 15 18 21 24 27 3 33 5 1 15 2 25 3 35 4 45 5 55 6 65 7 75 8 85 Capacity The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. l/min U.S. gpm 114157 1/215 38/76

EV 1 HP kw 5.6 7.2 5.2 6.4 4.8 3524 3521 EV 1/9 3524 4.4 3532 353 EV 1/8 3532 5.6 4. 3536 3543 3523 352 EV 1/7 3523 4.8 3.6 Power P2 4. 3.2 3.2 2.8 2.4 3554 3559 3553 3537 3545 3528 3535 3514 3533 3511 EV 1/6 EV 1/5 3535 3514 2. 357 3558 3481 3478 EV 1/4 3481 2.4 1.6 3573 3567 3548 35 359 357 EV 1/3 351 1.6.8 1.2.8 357 3566 3553 3563 3527 3544 3515 3524 3583 3461 3458 EV 1/2 3462.4 3545.. 2 4 6 8 1 12 14 16 18 2 3 6 9 12 15 18 21 24 27 3 33 m 3 /h l/min 5 1 15 2 25 3 35 4 45 5 55 6 65 7 75 8 85 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114157 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 39/76

EV 1 Performance curves 6Hz ft m 85 8 26 24 EV 1/17 75 7 22 EV 1/15 65 2 NPSH Efficiency Total Head 6 55 5 45 4 35 3 25 2 15 ft 24 2 16 12 8 4 % 18 16 14 12 1 m 8 6 4 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 EV 1/13 EV 1/12 EV 1/11 EV 1/1 2 4 6 8 1 12 14 16 18 2 3 6 9 12 15 18 21 24 27 3 33 2 4 6 8 12 2 4 6 8 12 m 3 /h l/min 1 14 16 18 2 m 3 /h 1 14 16 18 2 m 3 /h 3 6 9 12 15 18 21 24 27 3 33 5 1 15 2 25 3 35 4 45 5 55 6 65 7 75 8 85 Capacity The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. l/min U.S. gpm 114158 1/215 4/76

EV 1 HP 14.4 kw 1.4 13.6 12.8 9.6 3552 355 EV 1/17 3552 12. 11.2 8.8 8. 3561 3559 3557 EV 1/15 3559 1.4 9.6 7.2 3566 3525 3523 EV 1/13 3525 Power P2 8.8 8. 7.2 6.4 5.6 3572 3574 3537 3542 3547 3531 3536 3542 3529 3534 354 EV 1/12 EV 1/11 EV 1/1 3531 3536 3542 6.4 4.8 3552 3555 5.6 4.8 4. 3.2 4. 3.2 2.4 358 3582 3571 3573 3575 3577 3558 3562 3565 2.4 1.6 2 4 6 8 1 12 14 16 18 2 3 6 9 12 15 18 21 24 27 3 33 m 3 /h l/min 5 1 15 2 25 3 35 4 45 5 55 6 65 7 75 8 85 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 114158 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 41/76

EV 1 Technical data 6Hz F version M T version Available from EV1/2 to EV1/1 L1+L2 L1 L2 D1 D2 L3+L2 L3 T version 8 V version L4+L2 L4 27,7 N 2 Screw/Nut M12 1 2 Rp 1½ DN 4 Oval flanges on body type PN16: the pump is supplied without threaded oval counter flanges (Optional accessories, including bolts and joints). 8 Ø 6,3 8 27,5 261 25 F version 27,5 215 28 185 13 N 4xØ13 Ø15 Ø11 Round flanges on body type PN25: the pump is supplied without counterflanges (Optional accessories, including bolts and joints). N 4xØ18 Rp 1½ DN 4 V version C version L5+L2 L5 C version Connections with rapid fittings type Victaulic : the pump is supplied without the collars (Optional accessories). 8 27,5 22 Ø 87 Connections with round fittings type Clamp-FlexiClamp: the pump is supplied without collars (Optional accessories). 1141411 2/215 Motor Dimensions (mm) Weight (kg) Pump L1 L2 L3 L4 L5 M D1 D2 Electric Model Pump kw Dim F 1-PHASE 3-PHASE T V C 1-PHASE 3-PHASE 1-PHASE 3-PHASE Pump EV 1/2 1,1 8 347,5 232 232 347,5 347,5 347,5 15 129 16 16 17 17,5 28,6 EV 1/3 2,2 9 387,5 267 267 387,5 387,5 387,5 16 138 18 18 17 18,5 34,5 EV 1/4 2,2 9 417,5 267 267 417,5 417,5 417,5 16 138 18 18 17 19,5 35,5 EV 1/5 3 1 457,5-36 457,5 457,5 457,5-145 - 196 17 2,5 43,3 EV 1/6 4 112 487,5-36 487,5 487,5 487,5-145 - 196 17 21 47,5 EV 1/7 4 112 517,5-36 517,5 517,5 517,5-145 - 196 17 22 48,5 EV 1/8 5,5 132 723-328 723 723 723-16 - 225 3 42 75,6 EV 1/9 5,5 132 753-328 753 753 753-16 - 225 3 42,5 76,1 EV 1/1 7,5 132 783-328 783 783 783-16 - 225 3 43,5 77,1 EV 1/11 7,5 132 813-35 - 813 813-16 - 225 3 44 8 EV 1/12 7,5 132 843-35 - 843 843-16 - 225 3 44,5 8,5 EV 1/13 7,5 132 873-35 - 873 873-16 - 225 3 45,5 81,5 EV 1/15 11 16 953-425 - 953 953-194 - 248 35 49 111 EV 1/17 11 16 113-425 - 113 113-194 - 248 35 5,5 112,5 42/76

EV 15 43/76

EV 15 Performance curves 6Hz ft 9 m 28 85 8 75 7 65 6 26 24 22 2 18 EV 15/12 EV 15/11 EV 15/1 EV 15/9 Efficiency Total Head NPSH 55 5 45 4 35 3 25 2 15 1 5 ft 26 22 18 14 1 6 2 16 14 12 1 8 6 4 2 1 2 3 4 5 % 8 7 6 5 4 3 2 4 8 12 16 2 24 28 32 m 8 7 6 5 4 3 2 1 EV 15/8 EV 15/7 EV 15/6 EV 15/5 EV 15/4 EV 15/3 EV 15/2 EV 15/1 4 8 12 16 2 24 28 32 4 8 12 16 2 24 28 32 m 3 /h l/min m 3 /h m 3 /h 1 2 3 4 5 2 4 6 8 1 12 14 Capacity l/min U.S. gpm 111 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 44/76

EV 15 HP 24 kw 18 22 16 3546 EV 15/12 3546 Power P2 2 18 16 14 12 1 8 6 4 2 14 12 1 8 6 4 2 3577 3573 3576 3579 3577 3579 3581 3567 3562 3561 3561 3547 3557 3559 3563 3567 3569 3572 3575 3557 3549 3551 3548 3529 3558 3547 3552 3557 3559 3565 357 3545 3536 3539 3534 3511 4 8 12 16 2 24 28 32 1 2 3 4 5 355 3538 3543 3549 355 3557 3564 3535 3524 3527 3522 3533 3539 3544 3544 3553 3561 353 3517 3519 3516 3495 3486 EV 15/11 EV 15/1 EV 15/9 EV 15/8 EV 15/7 EV 15/6 EV 15/5 EV 15/4 EV 15/3 EV 15/2 EV 15/1 3534 3539 3545 3544 3553 3561 3529 3517 3519 3516 3486 m 3 /h l/min 2 4 6 8 1 12 14 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 111 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 45/76

EV 15 Technical data 6Hz F version M T version Available from EV15/1 to EV15/7 ØD1 L3 + L2 L3 N 2 x Ø 13 L1 + L2 L1 L2 D2 N 4 x Ø 19 T version 9 26,5 V version L4 + L2 L4 2 1 Oval flanges on body type PN16: the pump is supplied without threaded oval counter flanges (Optional accessories, including bolts and joints). Ø 6 DN 5 9 9 26,5 261 N 4 x Ø 13 3 185 C version 9 Ø 87 13 DN 5 25 215 L5 + L2 L5 26,5 Ø 127 Ø 165 V version Connections with rapid fittings type Victaulic : the pump is supplied without the collars (Optional accessories). 26,5 22 11495 5/214 F version Round flanges on body type PN25: the pump is supplied without counterflanges (Optional accessories, including bolts and joints). C version Connections with round fittings type Clamp-FlexiClamp: the pump is supplied without collars (Optional accessories). Motor Dimensions (mm) Weight Pump L1 L2 L3 L4 L5 M D1 D2 Electric Model Pump kw Size F 1-PHASE 3-PHASE T V C 1-PHASE 3-PHASE 1-PHASE 3-PHASE Pump EV 15/1 1,5 9 415 232 267 415 415 415 15 138 16 18 17 24 38, EV 15/2 3 1 425 267 29 425 425 425 16 138 18 18 17 26 44 EV 15/3 4 112 473-36 473 473 473-145 - 196 17 27 49,8 EV 15/4 5,5 132 77,9-328 77,9 77,9 77,9-161 - 225 3 49 83 EV 15/5 7,5 132 755,9-35 755,9 755,9 755,9-161 - 225 3 5,5 86,5 EV 15/6 11 16 823,9-425 823,9 823,9 823,9-198 - 248 35 54,5 112,5 EV 15/7 11 16 871,9-425 871,9 871,9 871,9-198 - 248 35 56 114 EV 15/8 11 16 919,9-425 - 919,9 919,9-198 - 248 35 57,5 115,5 EV 15/9 15 16 967,9-476 - 967,9 967,9-198 - 248 35 59 123 EV 15/1 15 16 115,9-476 - 115,9 115,9-198 - 248 35 6,5 124,5 EV 15/11 15 16 163,9-476 - 163,9 163,9-198 - 248 35 61,5 125,5 EV 15/12 18,5 16 1111,9-542 - 1111,9 1111,9-238 - 317 35 63 161 46/76

EV 2 47/76

EV 2 Performance curves 6Hz ft 85 m 26 8 75 7 65 24 22 2 EV 2/1 EV 2/9 6 18 EV 2/8 Efficiency Total Head NPSH 55 5 45 4 35 3 25 2 15 1 5 ft 26 22 18 14 1 6 2 16 14 12 1 8 6 4 2 EV 2/7 EV 2/6 EV 2/5 EV 2/4 EV 2/3 EV 2/2 EV 2/1 4 8 12 16 2 24 28 32 36 4 m 3 /h 1 2 3 4 5 6 l/min % 8 7 6 5 4 3 2 4 8 12 16 2 24 28 32 36 4 m 3 /h m 8 7 6 5 4 3 2 1 4 8 12 16 2 24 28 32 36 4 m 3 /h 1 2 3 4 5 6 2 4 6 8 1 12 Capacity 14 16 l/min U.S. gpm 1111 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 48/76

EV 2 HP kw 2 26 24 18 3539 EV 2/1 3538 22 16 3546 3545 EV 2/9 3544 2 14 3551 3535 EV 2/8 3534 Power P2 18 16 14 12 12 1 3565 3568 3555 3559 3551 3557 3541 3548 3551 3542 3544 3554 EV 2/7 EV 2/6 EV 2/5 3541 3543 3552 1 8 6 4 2 8 6 4 2 3574 3576 3573 3577 3576 3578 3566 3563 3564 3554 3562 3567 357 3574 3556 3552 3557 3542 3561 3568 3545 3539 3548 3527 356 3534 3527 3538 3513 3525 3518 353 353 EV 2/4 EV 2/3 EV 2/2 EV 2/1 3522 3514 3526 3499 4 8 12 16 2 24 28 32 36 4 1 2 3 4 5 6 m 3 /h l/min 2 4 6 8 1 12 14 16 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 1111 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 49/76

EV 2 Technical data 6Hz F version M T version Available from EV2/1 to EV2/7 ØD1 L3 + L2 L3 N 2 x Ø 13 L1 + L2 L1 L2 D2 N 4 x Ø 19 T version 9 26,5 V version L4 + L2 L4 2 1 Oval flanges on body type PN16: the pump is supplied without threaded oval counter flanges (Optional accessories, including bolts and joints). Ø 6 DN 5 9 9 26,5 261 N 4 x Ø 13 3 185 13 C version 9 Ø 87 DN 5 25 215 L5 + L2 L5 26,5 Ø 127 Ø 165 V version Connections with rapid fittings type Victaulic : the pump is supplied without the collars (Optional accessories). 26,5 22 11495 5/214 F version Round flanges on body type PN25: the pump is supplied without counterflanges (Optional accessories, including bolts and joints). C version Connections with round fittings type Clamp-FlexiClamp: the pump is supplied without collars (Optional accessories). Motor Dimensions (mm) Weight Pump L1 L2 L3 L4 L5 M D1 D2 Electric Model Pump kw Size F 1-PHASE 3-PHASE T V C 1-PHASE 3-PHASE 1-PHASE 3-PHASE Pump EV 2/1 2,2 9 415 232 267 415 415 415 15 138 16 18 17 24 4, EV 2/2 4 112 425 267 36 425 425 425 16 145 18 196 17 26 48,8 EV 2/3 5,5 132 659,9-328 659,9 659,9 659,9-161 - 225 3 47,5 81,5 EV 2/4 7,5 132 77,9-35 77,9 77,9 77,9-161 - 225 3 49 85 EV 2/5 11 16 775,9-425 775,9 775,9 775,9-198 - 248 35 53 111 EV 2/6 11 16 823,9-425 823,9 823,9 823,9-198 - 248 35 54,5 112,5 EV 2/7 15 16 871,9-476 871,9 871,9 871,9-198 - 248 35 56 12 EV 2/8 15 16 919,9-476 - 919,9 919,9-198 - 248 35 57,5 121,5 EV 2/9 18,5 16 967,9-542 - 967,9 967,9-238 - 317 35 59 157 EV 2/1 18,5 16 115,9-542 - 115,9 115,9-238 - 317 35 6,5 158,5 5/76

EV 3 51/76

EV 3 Performance curves 6Hz ft m 3 95 9 85 8 75 7 65 6 28 26 24 22 2 18 EV 3/8 EV 3/8-1A EV 3/8-2A EV 3/7 EV 3/7-1A EV 3/7-2A EV 3/6 EV 3/6-1A EV 3/6-2A Efficiency Total Head NPSH 55 5 45 4 35 3 25 2 15 1 5 5 1 15 2 25 3 35 4 45 5 ft 28 24 2 16 12 8 4 16 14 12 1 8 6 4 2 EV 3/5 EV 3/5-1A EV 3/5-2A EV 3/4 EV 3/4-1A EV 3/4-2A EV 3/3 EV 3/3-1A EV 3/3-2A EV 3/2 EV 3/2-1A EV 3/2-2A EV 3/1 EV 3/1-1A 1 2 3 4 5 6 7 8 9 l/min % 9 8 7 6 5 4 3 2 5 1 15 2 25 3 35 4 45 5 55 m 3 /h m 9 8 7 6 5 4 3 21 5 1 15 2 25 3 35 4 45 5 55 m 3 /h 55 m 3 /h 1 2 3 4 5 6 7 8 9 l/min 2 4 6 8 1 12 14 16 18 2 22 24 U.S. gpm Capacity 1187 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 52/76

EV 3 HP 46 kw Power P2 44 42 4 38 36 34 32 3 28 26 24 22 2 18 16 14 12 1 8 6 4 2 32 3 28 26 24 22 2 18 16 14 12 1 8 6 4 2 3586 3587 3585 3585 3586 3587 3587 3566 3569 357 3571 3573 3574 357 3574 3576 3575 3578 3579 3569 3565 3561 3564 3583 3584 3582 3583 3583 3584 3585 3559 3561 3564 3564 3567 357 3562 3565 357 3571 3573 3577 356 3551 3555 355 3578 3578 3577 3578 3579 358 3581 3546 3548 3553 3554 3556 3561 355 3553 356 3561 3565 3572 3548 3534 3544 3533 3573 3573 3571 3573 3574 3575 3577 3536 3538 3544 3544 3547 3553 354 3544 3551 3551 3557 3566 3537 3521 3533 3519 3569 357 3568 357 3571 3573 3575 353 3533 3538 3538 3542 3548 3535 3539 3547 3545 3552 3563 3532 3515 3525 3513 EV 3/8 3569 EV 3/8-1A 357 EV 3/8-2A 3567 EV 3/7 357 EV 3/7-1A 3571 EV 3/7-2A 3572 EV 3/6 3574 EV 3/6-1A 3528 EV 3/6-2A 3532 EV 3/5 3537 EV 3/5-1A 3537 EV 3/5-2A 3541 EV 3/4 3546 EV 3/4-1A 3534 EV 3/4-2A 3538 EV 3/3 3545 EV 3/3-1A 3544 EV 3/3-2A 3551 EV 3/2 3561 EV 3/2-1A 353 EV 3/2-2A 3514 EV 3/1 3523 EV 3/1-1A 3512 5 1 15 2 25 3 35 4 45 5 55 m 3 /h 1 2 3 4 5 6 7 8 9 l/min 2 4 6 8 1 12 14 16 18 2 Capacity 22 24 U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 1187 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 53/76

EV 3 Technical data 6Hz M D1 N 4 O15 22 17 L1 L1 + L2 29 24 L2 D2 N 8 O 19 45 22,5 15 3 32 F version: The pump is supplied without counterflanges (Optional accessories, including bolts and joints). O185 O145 DN 65 PN16-25-32 PN16 PN25-32 Pump Motor Dimensions (mm) Weight Model kw Size L1 L2 M D1 D2 L1 + L2 PUMP MOTOR ELECTRIC EV 3/1-1A 3 1 455 29 138 18 17 745 53 18 71 EV 3/1 4 112 455 36 145 196 17 761 53 22,8 75,8 EV 3/2-2A 5,5 132 724 328 161 225 3 152 74,5 34 18,5 EV 3/2-1A 7,5 132 724 35 161 225 3 174 74,5 36 11,5 EV 3/2 11 16 744 425 198 248 35 1169 77,5 58 135,5 EV 3/3-2A 11 16 826 425 198 248 35 1251 81,5 58 139,5 EV 3/3-1A 11 16 826 425 198 248 35 1251 81,5 58 139,5 EV 3/3 15 16 826 476 198 248 35 132 81,5 64 145,5 EV 3/4-2A 15 16 98 476 198 248 35 1384 85,5 64 149,5 EV 3/4-1A 15 16 98 476 198 248 35 1384 85,5 64 149,5 EV 3/4 18,5 16 98 542 238 317 35 145 85,5 98 183,5 EV 3/5-2A 18,5 16 99 542 238 317 35 1532 89,5 98 187,5 EV 3/5-1A 18,5 16 99 542 238 317 35 1532 89,5 98 187,5 EV 3/5 22 18 99 542 238 317 35 1532 89,5 19 198,5 EV 3/6-2A 22 18 172 542 238 317 35 1614 93,5 19 22,5 EV 3/6-1A 22 18 172 542 238 317 35 1614 93,5 19 22,5 EV 3/6 3 2 177 658 3 399 4 1735 96,5 228 324,5 EV 3/7-2A 3 2 1159 658 3 399 4 1817 1,5 228 328,5 EV 3/7-1A 3 2 1159 658 3 399 4 1817 1,5 228 328,5 EV 3/7 3 2 1159 658 3 399 4 1817 1,5 228 328,5 EV 3/8-2A 3 2 1241 658 3 399 4 1899 14,5 228 332,5 EV 3/8-1A 37 2 1241 658 3 399 4 1899 14,5 242 346,5 EV 3/8 37 2 1241 658 3 399 4 1899 14,5 242 346,5 114165 11/215 54/76

EV 45 55/76

EV 45 Performance curves 6Hz ft 85 8 75 7 65 m 26 24 22 2 EV 45/7 EV 45/7-1A EV 45/7-2A EV 45/6 EV 45/6-1A EV 45/6-2A Efficiency Total Head NPSH 6 55 5 45 4 35 3 25 2 15 1 5 ft 36 28 2 12 4 18 16 14 12 1 8 6 4 2 EV 45/5 EV 45/5-1A EV 45/5-2A EV 45/4 EV 45/4-1A EV 45/4-2A EV 45/3 EV 45/3-1A EV 45/3-2A EV 45/2 EV 45/2-1A EV 45/2-2A EV 45/1 EV 45/1-1A 1 2 3 4 5 6 7 8 9 m 3 /h 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15l/min % 9 8 7 6 5 4 3 2 1 2 3 4 5 6 7 8 9 m 3 /h m 12 1 8 6 4 2 1 2 3 4 5 6 7 8 9 m 3 /h 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15l/min 4 8 12 16 2 24 28 32 36 U.S. gpm Capacity 1188 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 56/76

EV 45 HP 6 55 kw 45 4 3568 3569 357 EV 45/7 EV 45/7-1A EV 45/7-2A 3566 3568 3569 Power P2 5 45 4 35 3 25 2 15 1 5 35 3 25 2 15 1 5 3585 3586 3587 3584 3585 3586 3587 3585 3586 3587 3587 3569 3571 3574 3577 3575 3576 3579 357 357 3582 3582 3583 3579 3581 3582 3583 3582 3583 3584 3585 356 3563 3567 3571 3568 357 3575 3562 3561 3577 3577 3578 3574 3575 3576 3579 3577 3578 3581 3582 3549 3555 3558 3561 3559 3562 3567 3554 3548 3572 3573 3574 3568 357 3571 3574 3572 3574 3577 3578 3539 3546 355 3553 3551 3552 3558 3545 3536 3564 3566 3567 3571 3569 357 3574 3576 3532 354 3544 3548 3545 3545 3553 3539 353 EV 45/6 EV 45/6-1A EV 45/6-2A EV 45/5 EV 45/5-1A EV 45/5-2A EV 45/4 EV 45/4-1A EV 45/4-2A EV 45/3 EV 45/3-1A EV 45/3-2A EV 45/2 EV 45/2-1A EV 45/2-2A EV 45/1 EV 45/1-1A 3562 3564 3565 3569 3567 3569 3572 3574 353 3536 3541 3546 3542 3542 3552 3535 3528 1 2 3 4 5 6 7 8 9 m 3 /h 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 l/min 4 8 12 16 2 24 28 32 36 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 1188 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 57/76

EV 45 Technical data 6Hz M D1 24 L2 N 4 O 15 19 D2 316 L1 + L2 265 L1 N 8 O 19 45 22,5 14 45 365 O2 O16 DN 8 PN16/25/32 PN16 PN25-32 14166 11/215 F version: The pump is supplied without counterflanges (Optional accessories, including bolts and joints). Pump Motor Dimensions (mm) Weight (kg) Model kw Size L1 L2 M D1 D2 L1 + L2 PUMP MOTOR ELECTRIC EV 45/1-1A 5,5 132 677 328 161 225 3 15 76,5 34 11,5 EV 45/1 7,5 132 677 35 161 225 3 127 76,5 36 112,5 EV 45/2-2A 11 16 779 425 198 248 35 124 83,5 58 141,5 EV 45/2-1A 11 16 779 425 198 248 35 124 83,5 58 141,5 EV 45/2 15 16 779 476 198 248 35 1255 83,5 64 147,5 EV 45/3-2A 18,5 16 861 542 238 317 35 143 87,5 98 185,5 EV 45/3-1A 18,5 16 861 542 238 317 35 143 87,5 98 185,5 EV 45/3 18,5 16 861 542 238 317 35 143 87,5 98 185,5 EV 45/4-2A 22 18 943 542 238 317 35 1485 91 19 2 EV 45/4-1A 3 2 948 658 3 399 4 166 94 228 322 EV 45/4 3 2 948 658 3 399 4 166 94 228 322 EV 45/5-2A 3 2 13 658 3 399 4 1688 98 228 326 EV 45/5-1A 3 2 13 658 3 399 4 1688 98 228 326 EV 45/5 37 2 13 658 3 399 4 1688 98 242 34 EV 45/6-2A 37 2 1112 658 3 399 4 177 12 242 344 EV 45/6-1A 37 2 1112 658 3 399 4 177 12 242 344 EV 45/6 37 2 1112 658 3 399 4 177 12 242 344 EV 45/7-2A 45 225 1194 699 335 465 45 1893 19 38 417 EV 45/7-1A 45 225 1194 699 335 465 45 1893 19 38 417 EV 45/7 45 225 1194 699 335 465 45 1893 19 38 417 58/76

EV 65 59/76

EV 65 Performance curves 6Hz ft m 65 2 6 55 5 45 18 16 14 EV 65/5-1A EV 65/5-2A EV 65/4 EV 65/4-1A EV 65/4-2A Total Head 4 35 3 12 1 EV 65/3 EV 65/3-1A EV 65/3-2A 25 8 EV 65/2 2 15 1 5 6 4 2 EV 65/2-1A EV 65/2-2A EV 65/1 EV 65/1-1A 1 2 3 4 5 6 7 8 9 1 11 12 m 3 /h Efficiency NPSH ft 52 48 4 32 24 16 8 % 9 8 7 6 5 4 3 2 m 16 14 12 1 8 6 4 2 2 4 6 8 1 12 14 16 18 2 l/min 1 2 3 4 5 6 7 8 9 1 11 12 1 2 3 4 5 6 7 8 9 1 11 12 m 3 /h m 3 /h 2 4 6 8 1 12 14 16 18 2 l/min 4 8 12 16 2 24 28 32 36 4 44 48 52 U.S. gpm Capacity 1112 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 6/76

EV 65 HP kw 6 45 EV 65/5-1A 3566 3568 55 5 45 4 4 35 3 3579 3576 3578 358 3571 3573 3576 3571 3573 357 3573 3567 357 357 EV 65/5-2A EV 65/4 EV 65/4-1A EV 65/4-2A EV 65/3 3569 3571 3565 3569 3568 Power P2 35 3 25 2 15 1 5 25 2 15 1 5 3582 3584 3584 3582 3584 3582 3585 3563 3565 3575 3575 3573 3569 3581 3582 3579 3582 358 3583 3558 3561 3568 3569 3571 3564 3575 3578 3578 358 3547 3555 3561 3556 3567 3551 3574 3574 3576 3533 3537 3542 3548 3549 3553 3544 3547 3555 3561 3541 3538 EV 65/3-1A EV 65/3-2A EV 65/2 EV 65/2-1A EV 65/2-2A EV 65/1 EV 65/1-1A 3572 353 3538 3546 3543 3551 3536 1 2 3 4 5 6 7 8 9 1 11 12 m 3 /h 2 4 6 8 1 12 14 16 18 2 l/min 4 8 12 16 2 24 28 32 36 4 44 48 52 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 1112 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 61/76

EV 65 Technical data 6Hz M D1 24 L2 N 4 O15 19 D2 L1 316 265 14 45 N 8 O 19 N 8 O 23 L1 + L2 365 O 23 O 18 DN 1 PN16 O 255 O 19 DN 1 PN25 * 114164 11/215 F version: The pump is supplied without counterflanges (Optional accessories, including bolts and joints). * On request available from EV65/1-1A to EV65/4-1A Pump Model Motor Dimensions (mm) Weight (kg) PN kw Size L1 L2 M D1 D2 L1 + L2 PUMP MOTOR ELECTRIC EV 65/1-1A 16 7,5 132 737,1 35 161 225 3 187,1 81 36 117 EV 65/1 16 11 16 757,1 425 198 248 35 1182,1 84 58 142 EV 65/2-2A 16 15 16 849,2 476 198 248 35 1325,2 88,5 64 152,5 EV 65/2-1A 16 18,5 16 849,2 542 238 317 35 1391,2 88,5 98 186,5 EV 65/2 16 22 18 849,2 542 238 317 35 1391,2 89 19 198 EV 65/3-2A 16 22 18 941,3 542 238 317 35 1483,3 93,5 19 22,5 EV 65/3-1A 16 3 2 946,3 658 3 399 4 164,3 96,5 228 324,5 EV 65/3 16 3 2 946,3 658 3 399 4 164,3 96,5 228 324,5 EV 65/4-2A 16 37 2 138,4 658 3 399 4 1696,4 11 242 343 EV 65/4-1A 16 37 2 138,4 658 3 399 4 1696,4 11 242 343 EV 65/4 16 45 225 138,4 699 335 465 45 1737,4 14 38 412 EV 65/5-2A 25 45 225 113,5 699 335 465 45 1829,5 18,5 38 416,5 EV 65/5-1A 25 45 225 113,5 699 335 465 45 1829,5 18,5 38 416,5 62/76

EV 95 63/76

EV 95 Performance curves 6Hz 55 ft m 16 5 EV 95/4-2A 45 14 EV 95/3 4 12 EV 95/3-1A 35 EV 95/3-2A Efficiency Total Head NPSH 3 25 2 15 1 5 ft 52 44 36 28 2 12 4 1 EV 95/2 8 EV 95/2-1A EV 95/2-2A 6 EV 95/1 4 EV 95/1-1A 2 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 m 3 /h 2 4 6 8 1 12 14 16 18 2 22 24 l/min % 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 m 3 /h m 16 14 12 1 8 6 4 2 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 m 3 /h 2 4 6 8 1 12 14 16 18 2 22 24 4 8 12 16 2 24 28 32 36 4 44 48 52 56 6 64 Capacity l/min U.S. gpm 1113 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 64/76

EV 95 HP 65 kw 6 45 3567 EV 95/4-2A 3566 55 4 357 EV 95/3 3571 5 3572 45 35 3575 3575 3566 EV 95/3-1A 3565 4 3 3579 3578 357 3572 357 EV 95/3-2A 3569 Power P2 35 3 25 2 25 2 15 3582 3583 3581 3584 3583 3581 3578 3581 3582 3555 3574 3577 3579 3546 3551 3576 3537 3542 3573 3532 3538 EV 95/2 EV 95/2-1A EV 95/2-2A 3572 3529 3537 15 1 1 356 3569 3564 3563 3561 3555 3565 3549 3558 3544 3554 EV 95/1 EV 95/1-1A 354 3553 5 5 3576 3573 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 2 4 6 8 1 12 14 16 18 2 22 24 m 3 /h l/min 4 8 12 16 2 24 28 32 36 4 44 48 52 56 6 64 Capacity U.S. gpm Performance curves of Q, H and P depend on the rpm number according to the following formulae: remains approximately the same. The rpm number related to the performance curves (Q-H-P) is indicated in the power chart. Performance curves (Q-H-P) will change in case a motor with rpm number different from indicated values is used. Q=Capacity, H=Head, P=Power, h=effi ciency 1113 1/215 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B. 65/76

EV 95 Technical data 6Hz M L2 D1 N 4 O15 26 199 D2 L1 N 8 O 19 341 28 14 N 8 O 23 45 L1 + L2 38 O23 O18 DN 1 PN16 O255 O19 DN 1 PN25/4 * 114167 11/215 F version: The pump is supplied without counterflanges (Optional accessories, including bolts and joints). * Available from EV95/1-1A to EV95/4-2A Pump Motor Dimensions (mm) Model Weight (kg) PN kw Size L1 L2 M D1 D2 L1 + L2 PUMP MOTOR ELECTRIC EV 95/1-1A 16 11 132 737,1 425 198 248 3 1162,1 82,5 58 14,5 EV 95/1 16 15 16 757,1 476 198 248 35 1233,1 85,5 64 149,5 EV 95/2-2A 16 18,5 16 849,2 542 238 317 35 1391,2 89 98 187 EV 95/2-1A 16 22 18 849,2 542 238 317 35 1391,2 89,5 19 198,5 EV 95/2 16 3 2 854,2 658 3 399 4 1512,2 92,5 228 32,5 EV 95/3-2A 16 37 2 946,3 658 3 399 4 164,3 96,5 242 338,5 EV 95/3-1A 16 37 2 946,3 658 3 399 4 164,3 96,5 242 338,5 EV 95/3 16 45 225 946,3 699 335 465 45 1645,3 99,5 38 47,5 EV 95/4-2A 16 45 225 138,4 699 335 465 45 1737,4 13 38 411 66/76

EV Series Pump Section and List of Main Components 67/76

EV Series Pump Section and List of Main Components EV 1 - EV 3 - EV 6 - EV 1 2.9 2.6 2.8 2.7 2.4 2.5 3.1 3.3 4.1 4.2 4. 5.2 4.6 5.1 5. 1. 4.3 2.2 2.3 2.7 2.9 1.4 3. 2.1 1.6 3.2 4.4 2. 1.3 5.3 3.2 4.5 3.3 1.2 1.1 (Configuration up to 4kW) 68/76

2.9 2.6 2.2 2.7 2.7 2.3 2.4 2.8 2.5 3.1 3.3 2.9 3. 2.1 1.6 3.2 114112 1/215 (Configuration from 5,5kW) N. rif. Description 1. Pump casing 1.1 Pump fi xing plate 1.2 Filling and draining plug 1.3 Tie bolt 1.4 Kit nuts and washers 1.6 Upper fl ange 2. Outer Case 2.1 Mechanical seal housing 2.2 Motor fl ange 2.3 Motor bracket 2.4 Coupling guard 2.5 Filling plugs 2.6 Circlips and bearings, and O-ring 2.7 Coupling fasteners 2.8 Coupling 2.9 Kit motor screws N. rif. Description 3. Pump shaft 3.1 Kit Mechanical seal 3.2 Mechanical seal fastening kit 3.3 Kit O-rings 4. Stage housing and diffuser 4.1 Stage Centering outlet 4.2 Floating neck ring 4.3 Initial stage housing 4.4 Last Stage with diffuser 4.5 Stage Centering inlet 4.6 Stage housing and diffuser with bearing 5. Impeller 5.1 Impeller spacer 5.2 Intermediary sleeve 5.3 Intermediary sleeve spacer 69/76

EV Series Pump Section and List of Main Components EV 15 - EV 2 2.9 2.2 2.1 2.6 2.4 2.3 2.7 2.8 2.9 3. 2.5 3.1 3.2 3.3 5. 4.2 4. 4.6 5.2 1. 4.3 3.2 1.4 2.1 1.6 4.1 4.4 5.1 2. 1.3 5.3 3.3 1.1 1.2 Configuration from 5,5kW 7/76

2.2 2.6 2.9 2.7 2.4 2.9 2.5 2.8 2.3 3. 3.1 3.2 114114 1/215 Configuration up to 4kW N. rif. Description 1. Pump casing 1.1 Pump fi xing plate 1.2 Filling and draining plug 1.3 Tie bolt 1.4 Kit nuts and washers 1.6 Upper Flange 2. Outer Case 2.1 Mechanical seal housing 2.2 Motor fl ange 2.3 Motor bracket 2.4 Coupling guard 2.5 Filling plugs 2.6 Circlips and bearings, and O-ring 2.7 Coupling fasteners 2.8 Coupling 2.9 Kit motor screws N. rif. Description 2.1 Motor shaft adapter 3. Pump shaft 3.1 Kit Mechanical seal 3.2 Mechanical seal fastening kit 3.3 Kit O-rings 4. Stage housing and diffuser 4.1 Stage Centering outlet 4.2 Floating neck ring 4.3 Initial stage housing 4.4 Last Stage with diffuser 4.6 Stage housing and diffuser with bearing 5. Impeller 5.1 Impeller spacer 5.2 Intermediary sleeve 5.3 Intermediary sleeve spacer 71/76

EV Series Pump Section and List of Main Components EV 3 - EV 45 - EV 65 - EV 95 2.9 2.2 2.1 2.6 2.4 2.7 2.3 2.8 2.9 3.1 2.5 4.8 3.3 5. 4. 4.2 4.7 51.5 4.6 51.1 51.4 4.5 2.1 1.4 1.6 3.2 3. 4.1 2. 51.2 1.3 1. 1.5 51.3 3.2 3.3 1.2 1.1 Configuration from 5,5kW 72/76

2.6 2.7 2.2 2.9 2.3 2.8 2.4 2.9 3. 3.1 3.2 2.5 114113 1/215 Configuration up to 4kW N. rif. Description 1. Pump casing 1.1 Pump fi xing plate 1.2 Draining plug 1.3 Tie bolt 1.4 Kit nuts and washers 1.5 Kit flanges ring 1.6 Upper Flange 2. Outer Case 2.1 Mechanical seal housing 2.2 Motor fl ange 2.3 Motor bracket 2.4 Coupling guard 2.5 Filling plugs 2.6 Circlips and bearings, and O-ring 2.7 Coupling fasteners 2.8 Coupling 2.9 Kit motor screws 2.1 Motor shaft adapter N. rif. Description 3. Pump shaft 3.1 Kit Mechanical seal 3.2 Mechanical seal fastening kit 3.3 Kit O-rings 4. Stage housing and diffuser 4.1 Stage Centering outlet (only on EV 65/95) 4.2 Floating neck ring 4.5 Stage Centering inlet 4.6 Stage housing and diffuser with bearing 4.7 Flange clamping neck ring 4.8 Spring ring 5. Impeller 51.1 Split cone 51.2 Intermediary sleeve nut 51.3 Journal sleeve 51.4 Split cone nut 51.5 Intermediate impeller with screw 73/76

EV Series Dimensions of counterflanges 74/76

Dimensions of oval counterflanges k d1 d2 OVAL COUNTERFLANGES DN DIMENSIONS [mm] HOLES PN D d1 k L b d2 N Rp 1" ¼ 32 99 75 33 8 11 NPT1" ¼ Rp 1" ½ 4 35 2 16 NPT1" ½ 13 1 1 13 Rp 2" 5 39 NPT 2" Kit round counterflanges available on request; AISI 34 L b D 11411 11/213 Dimensions of round threaded counterflanges according to EN 192-1 ROUND THREADED COUNTERFLANGES DN DIMENSIONS [mm] HOLES D d1 k L b d2 N PN d1 25 115 Rp 1" NPT 1" 85 14 L b d2 32 14 4 15 Rp 1" ¼ NPT 1" ¼ Rp 1" ½ NPT 1" ½ 1 11 43 16 18 4 25 k 5 165 Rp 2" NPT 2" 127 18 19 8 D 65 185 Rp 2" ½ NPT 2" ½ 145 32 18 11411 11/213 8 2 1 22 Rp 3" NPT 3" Rp 4" NPT 4" 16 34 18 4 2 18 8 16 Kit round counterflanges available on request: DN 25-32-4-5: galvanized steel, AISI 34, AISI 316L DN 65-8-1: galvanized steel, AISI 316 Dimensions of welding round counterflanges according to EN 192-1 D k WELDING ROUND COUNTERFLANGES DN DIMENSIONS [mm] HOLES b D d1 k L b d2 N PN d2 d1 65 185 77,5 145 22 18 8 2 9,5 16-24 8 25/4 11411 11/213 1 235 116 19 26 22 Kit round counterflanges available on request; AISI 316 75/76

Note 76/76

Franklin Electric S.r.l. via Asolo, 7 3631 Dueville (Vicenza) - Italy Tel. +39 444 361114 Fax +39 444 365247 P.IVA e C.F. 55813241 e-mail: sales.it@fele.com www.etechpumps.com Single member - Company subject to the control and coordination of Franklin Electric Co., Inc. 154_ed.1/216