Hyspecs Transmissions Ltd Mechanical Power Transmission Solutions
Introduction HYTRANS (Hyspecs Transmissions Ltd) is a division of Hyspecs Holdings Ltd. Hyspecs Holdings Ltd is made up of: HYTRANS (Hyspecs Transmissions) HYSPECS (Hydraulic Specialties North & South Island) HYTECH (Hyspecs Technologies)
Our locations We employ 42 people across our branches in Auckland & Christchurch, enabling national coverage. 10 sales territories covered by our sales staff.
Our home bases Auckland 9 Lady Ruby Drive East Tamaki Ph: 09 274 9985 Fax: 09 274 4441 Christchurch 40 Durham Street Sydenham Ph: 03 366 1872 Fax: 03 366 1431
in a nutshell HYTRANS is a 100% New Zealand owned and operated company. Our main focus is to provide engineered sales solutions & transmission advice Is located in Auckland and Christchurch, within the HYSPECS premises Exclusive NZ rights to Comer Planetary Drives (SOM) Our full line of Planetary Drives fits perfectly with existing lines of HYSPECS electric or hydraulic motors and other hydraulic accessories Wide range of transmission accessories including transmission chain & sprockets, conveyor chain, vee belts and taper lock pulleys, timing belts, shaft couplings and shaft locking bushes, AC motor controllers, conveyor components, clutches and brakes, modular belting, oil coolers & worm boxes
in a nutshell HYSPECS is a 100% New Zealand owned and operated company. Hyspecs was formed in 1972 as an alternative to the single brand, multi-national suppliers in existence at the time. We offered then, as we do now, an extensive range of hydraulic equipment. Stocked product lines range from simple hand or gear pumps, geroler motors, manual control valves, through to custom cartridge manifolds and load sensing equipment with electroproportional and servo valving. Product is sourced from around the world through selected well-known, quality companies. Dedicated industrial hydraulic project engineer.
in a nutshell HYTECH is a 100% New Zealand owned and operated company. Hytech was established in 2002 to fulfil a growing industry requirement for timely, small run, CNC milled aluminium and steel components. Hytech s primary market is the hydraulic manifold industry. Hytech manufactures and stocks a full line of standard hydraulic manifolds. With the aid of in-house designers, custom aluminium and steel manifolds are also designed and produced. Custom manifolds offer multiple function, layout, port and cavity options, to suit your specific requirements.
Assembly Centres Purpose built centres located in both Auckland and Christchurch branches Test bench facilities for hydraulic and electric motors Gearbox repair service Hydraulic motor and ram repair service Workshop services include: Full machining services Boring and keyway service Taper lock bore Shafts made
Why choose HYTRANS? Experienced staff to offer the right solution Power Transmission Solutions - give us your power transmission problems and we will provide you with the solution - right to the driven shaft Total drive system advice - Industrial - Marine - Mobile We have the total industry experience to offer the right product for the application National coverage - 9 Sales Engineers on the road, supported by qualified internal staff & product specialists Assembly centres in both Auckland & Christchurch. We can deliver to most parts of the country Overnight Hydraulic test bench & electric test facilities Large stock holding and 24/7 technical sales and service backup Dedicated service division
Hyspecs Transmissions Ltd PRODUCT SHEETS
Planetary drives Hydraulic Input Brake Connection Flange Electric Input SAE Input Reduction Kit Output Free Input Worm Input
Planetary drives CPC PC MC Comer planetary drives are a compact modular design, fully reversible, final drive system, designed specifically for use with hydraulic and electric motors Flexible range of ratio's combinations & mounting configurations - foot, flange, shrink disc Free input and worm box mounts with spindle and wheel mounts available on indent. Ratios from 3.55:1 & stacking to five stages MS FS
Gearboxes: Comer Industries Full range up to 650000 Nm Mounting configurations: Inline Right angle Shaft mount Foot mount Flange mount Hydraulic input Electric input Free input shaft Splined input shaft Worm box input Special harsh environment coatings and protection
CAD Drawings CAD drawings can be created and printed as required.
Electric motors Hengshui 3-phase electric motors ranging from 0.12 to 315 kw 4-pole (approx 1440 rpm) with 2,6, and 8 pole available options Foot and Flange mounts Motors exceed requirements of AS/NZ 1359:2004 Many different motor accessories and options available; Brake, Vector, Servo and Stainless motors Variable speed drives Soft starters Access to other brands to maintain plant standards
Hydraulic motors Low speed, high torque Poclain radial piston motors and geroler/gerotor Char- Lynn motors High speed, low torque Eaton piston motors and gear motors by Galtech Brake options available on all motors
PGR/PGW Wheel Output Suitable for driving rubber tired or tracked self-propelled vehicles Single or 2 stage reduction model with transmission torques up to 16000 Nm Integrated parking brake
PG PR Slew & Yaw Drives
Reduction Boxes - Motovario Variators Fractional H.P. and smaller power reduction boxes
Hydraulic Input Worm Box Hollow or male output shaft Input designed to fit standard SAE motors
Rossi Gearboxes Shaft Mount 90 Degree Inline foot mount
Brakes Ausco & Fairfield Brakes Comer Failsafe Brake Caliper Brake
Clutches Electromagnetic Manual Hydraulic Pneumatic Cone Clutches
Specialist Segmented Sprockets Steel or plastic
Shaft Couplings (Taper Lock) From 72 Nm 7200 Nm (max)
Tyre Couplings Up to a maximum torque of 42740 Nm Max Dynamic tyre couplings
Chain & Rigid Couplings Chain Coupling - up to 13740 Nm and 140 mm maximum bore size Parallel-keyed rigid coupling (single or double split)
Gear and Spider Couplings
Taper Lock Pulleys, Bushes & Vee Belts Imperial bore sizes 3/8 5 Metric bore sizes 9mm 125mm Pulleys in SP2, SPA, SPB, SPC sections with larger on request Weld in hubs up to size 5050 Classical sections Z, A, B, C, D Wedge sections SPZ, SPA, SPB, SPC Raw edge XPZ, XPA, XPB, XPC Variable speed belts Joinable vee belting
Shaft Locking Bushes Flanged up to 130 mm bore Non-flanged up to 250 mm bore
Synchronous Drives Trapezoidal pitches XL, L, H, XH H.T.D 3M, 5M, 8M, 14M Linear HTD 8M, HTD 14M Poly chain GT2 8mm, 14mm Metric T2.5, T5, T10 Double sided T5 & T10, AT5 & AT10 Custom made pulleys on request
White PU Belting White polyurethane belting Numerous belt section options available Numerous profile options available
Transmission Chain & Sprockets BSS, ASA, Double pitch Sprockets: Full range Simplex, Duplex Triplex plus specials on request Lubricators
Conveyor & Mill Chains Conveyor chains (including special attachments) Agricultural chain & sprockets Mill chain wide and narrow series
Troughing Rollers / Idlers
Conveyor Components or Complete Systems
Modular Plastic Belting Options including; flush top, raised top, perforated top and low back pressure (side flexing and straight running) Side flexing and straight running table top chain Many options of tracking guides
Table Top Chain & Profiles
Emmegi Oil Coolers Air/oil and sea/fresh water/oil coolers Oil flow to 280 l/min Offline coolers with own electric motor and pump Bypass check valves for overpressure protection 12/24 VDC, single and 3-phase AC electric motors IP 65 rating available